Synthetic Data Generation for Robotics

Robotic manipulation videos are increasingly used as visual plans for embodied agents, but optimizing purely for visual plausibility often fails to capture the fragile physical manifold of real-world interactions. Even minor physics-violating errors at the interaction boundary, such as interpenetration or premature object motion, can completely invalidate the inferred timing and pose needed for downstream execution. Because standard supervised fine-tuning lacks the direct pressure to penalize these localized failures, we introduce AgiBot-PhysPref. This rigorously curated 10,000-sample preference dataset isolates condition-matched physics violations, turning the generator's own failure distribution into a foundational signal for physical consistency. Building upon this, we propose RobotAPO, an adversarial physics preference optimization framework operating in the continuous flow-matching denoising space. To prevent the policy from merely memorizing static curated failures, RobotAPO employs a lightweight adversarial counterfactual proposer that learns a condition-dependent, physical-failure-biased direction in denoising space. This encourages the model to explore and better respect the physical interaction boundary, all while maintaining a pure prompt-and-reference inference interface without requiring external structural conditioning. Comprehensive evaluations demonstrate that explicitly correcting these localized physics violations improves downstream robot execution from generated videos. On held-out AgiBot conditions, RobotAPO outperforms the strongest controlled internal baseline in physical consistency by 6.8% hard score and 10.0% soft score. Crucially, in real-robot replay, it translates these physical-consistency gains into a 37.4% relative improvement in task success over the strongest controlled internal baseline.

Simulation enables large-scale, low-cost robot data generation, but policies trained in simulation often fail to transfer to the real world due to the sim-to-real visual discrepancies. Existing approaches often rely on intermediate representations, which can discard rich semantic information or require additional perception modules at deployment. We address this visual sim-to-real gap with RoboRender, a framework that converts simulated trajectories into photorealistic RGB videos for policy learning. RoboRender trains a robot-oriented video generation model conditioned on simulated depth videos, language instructions, and robot RGB mask videos, preserving simulator geometry, robot motion, and action labels while synthesizing realistic textures, backgrounds, and distractors. The generated RGB videos are paired with simulator-provided states and actions to train policies for zero-shot real-world deployment. On robot video test sets, our video model outperforms depth-conditioned video generation baselines in generation quality. In real-world experiments across pick-and-place, articulated-object manipulation, and mobile manipulation tasks, policies trained on RoboRender-generated data achieve a 71% average success rate, outperforming raw simulation renderings and conventional visual domain randomization by approximately 7.1x and 3.6x, respectively. We further show that policy performance improves with more generated videos per simulation trajectory, increasing opening-task success by 65 percentage points. These results demonstrate that generative video rendering mitigates the visual sim-to-real gap for zero-shot policy transfer. Project website: https://robo-render.github.io/.

Realistic physical interaction is a cornerstone of embodied intelligence, yet collecting paired visual--tactile data remains costly. Visual-to-tactile synthesis offers a promising approach to augmenting such data, but learning this mapping is complicated by the gap between visual appearance and contact-related material properties, as well as spatial misalignment in paired observations. To address these challenges, we present \textbf{PhysTacGen}, a visual-to-optical-tactile image generation framework that integrates material-aware descriptions with geometric conditioning. First, we introduce Group Tactile Policy Optimization (GTPO), a reinforcement learning strategy that refines a vision--language model to generate structured material descriptions using task-specific rewards. Second, we combine DINOv2-based pair curation with monocular relative-depth estimation to select training pairs and provide geometric priors. Finally, an SDXL ControlNet synthesizes optical tactile images conditioned on RGB, relative depth, and GTPO-generated text. Experiments on curated SSVTP data demonstrate improved structural similarity over the compared baselines, while a blinded user study shows a preference for GTPO-generated descriptions. Generated tactile inputs also improve performance on an attribute-derived force-coefficient prediction proxy. Together, these results demonstrate the effectiveness of PhysTacGen for optical tactile image synthesis and its utility in the evaluated downstream task.The code will be available at https://github.com/VDIGPKU/PhysTacGen.

Scaling robotic foundation models requires diverse training data and reliable evaluation environments. Simulation offers a scalable solution, yet existing generation pipelines remain constrained by predefined assets and skills, a disconnect between scene generation and task generation, and limited support for complex embodiments and physics. We introduce EmbodiedSmith, a framework for scalable embodied data generation through recursive self-improvement (RSI). EmbodiedSmith unifies asset, scene, and task generation in a pipeline that supports autonomous creation and language-driven customization. Its core is an agentic refinement loop: scene generation anticipates downstream task requirements, while task generation guides targeted scene edits, allowing scenes and tasks to iteratively improve one another. This joint refinement improves task generation success, including for long-horizon tasks. The framework further supports mobile manipulators, humanoids, and dexterous hands, as well as interactions involving deformable objects and fluids, broadening the range of behaviors and physical phenomena represented in generated data. Together, these capabilities provide a flexible simulation engine for both robot pretraining and evaluation. Extensive experiments validate the quality, diversity, and generation efficiency of the resulting data, while downstream policy experiments demonstrate that increased data diversity improves generalization.

The ability to interact with articulated objects is essential for embodied intelligent systems, but collecting large-scale real-world demonstrations for these interactions remains challenging due to the precise contact and constraint-following motions involved. Although simulation provides a promising alternative, existing synthetic data efforts cover limited articulated-object categories, while general-purpose synthesis pipelines lack explicit designs for part-level semantics and articulation constraints, hindering agentic task generation and scalable synthesis of high-quality articulated-manipulation demonstrations. To bridge this gap, we introduce SMART, a scalable system leveraging large-scale Synthesized Manipulation demonstrations for ARTiculated-object manipulation. At its core, we develop SMART-Sim, a simulation platform with articulation-aware design that enables effective task generation and efficient demonstration collection. Building on SMART-Sim, we apply agentic task generation and design a scalable distributed synthesis system, using them to synthesize SMART-Data, comprising over 1M demonstrations across 44 atomic task types, 5 robot setups, and 2,507 articulated objects. The vision-language-action (VLA) model pretrained on SMART-Data shows competitive performance on simulation benchmarks and achieves zero-shot sim-to-real transfer and scalable performance in real-world articulated-object manipulation tasks. This highlights the potential of synthetic demonstrations in providing effective and scalable supervision for improving VLA model performance in contact-rich articulated-object manipulation.

Captured human-object interactions provide rich supervision for humanoid loco-manipulation, but they are sparse, heterogeneous, and not directly executable by robots. We introduce InterMimicGen, a self-evolving motion-imitation framework in which robot motion data and a tracking policy improve each other. First, we consolidate motion-captured human-object interaction datasets and retarget them into humanoid robot references while preserving whole-body coordination and dexterous hand-object relationships. This produces a large and diverse humanoid robot reference collection for dexterous whole-body loco-manipulation. Second, we train a physics-based generalist tracker that executes these references in simulation on a humanoid with dexterous hands, covering a scale and diversity beyond prior humanoid tracking systems for loco-manipulation. Third, we close a data flywheel: each round makes small, task-preserving changes to where an interaction takes place and how the body performs it, fine-tunes the tracker on them, and keeps only the variants whose simulated execution completes the task, which seed the next round. With more iterations, these small edits compound into broader coverage around the sparse original demonstrations while preserving task semantics and motion quality. Experiments show contact-preserving retargeting across robot configurations, broad tracking with a single generalist policy, executable motions that keep growing over augmentation rounds, and transfer to real robots. InterMimicGen provides a unified path from heterogeneous human demonstrations to a continually expanding motion resource for humanoid robot learning.

Early development unfolds in caregiver-infant dyads, where infants' sensorimotor streams are shaped by physical contact and face-to-face interaction. Yet developmental robotics simulators commonly model infants in isolation, limiting the study of caregiver-mediated experience. We present a caregiver-enabled extension of the Multi-Modal Infant Model (MIMo) in MuJoCo that turns MIMo into a controllable platform for replaying dyadic interaction and generating dense infant-perspective observations. The system provides (i) an articulated caregiver model compatible with MIMo morphologies, parameterized from anthropometrics and optionally resized to a recorded caregiver; (ii) a workflow to replay naturalistic caregiver-infant holding and soothing interactions; and (iii) logging and visualizing the infant's first-person multimodal experience (we show touch and vision). We showcase the tool on touch by introducing origin-aware contact logging that disambiguates self-, caregiver-, and environment-generated contact and supports aggregation into touch-rate statistics comparable to manual coding. While we showcase tactile analysis, the platform is intended more broadly as a generator of multimodal dyadic datasets (touch and egocentric vision) for modeling the development of social interaction.

While recent video generative models can synthesize high-fidelity videos, they struggle to portray plausible physical interactions and the resulting state transitions, a critical bottleneck for applications in robotics and VR/AR. To address this, we introduce a framework to generate a scalable synthetic dataset of controllable interactions. Our pipeline leverages a structured taxonomy and state-of-the-art image editing models to create explicit start' and end' state images, which serve as visual anchors for the interaction. To generate a seamless video utilizing these anchors, we propose State-Guided Sampling (SGS), a novel sampling technique that mitigates artifacts common in naive conditional generation. Furthermore, we develop and validate a new automated evaluation system that aligns with human judgments to ensure data quality. Experiments show that fine-tuning a base model on our dataset significantly enhances its ability to generate plausible interactions.

Simulation can expand scarce real demonstrations for co-training, yet how world fidelity and similarity to human behavior affect policy performance remains unclear. We distinguish world grounding, which aligns simulation with the real system, and behavior grounding, which aligns simulated trajectories with human motion. We build a real2sim2real pipeline that varies these axes independently to generate data for co-training. On a dynamic dexterous pick-and-sort task, fully grounded co-training raises success from 52% to 86%; averaged across configurations, world grounding improves success by 18 percentage points and behavior grounding by 10. Deployed policies behave like a mixture of real-derived and simulation-derived policies, imitating real demonstrations in covered states and relying on simulated behavior elsewhere, which we examine through latent-space analysis. Together, these results suggest complementary roles: world grounding lets policies use simulated experience beyond real-data coverage, while behavior grounding matters mainly when world grounding is imperfect. Grounded simulation remains beneficial when co-training foundation models.

Vision-language-action (VLA) models enable task-conditioned interaction, but extending them to scene-scale aerial manipulation remains challenging due to costly whole-body demonstrations, latency-induced action-state misalignment, and cross-site behavior composition. We present a unified framework for synthetic policy training and scene-scale execution on articulated uncrewed aerial manipulators (UAMs). A scene-reconfigurable pipeline synthesizes task-conditioned, kinodynamically feasible trajectories and synchronized multiview observations for VLA training without physical-platform demonstrations. Measured-progress-aligned realization (MPAR) aligns asynchronously returned action chunks with measured execution progress and realizes them as continuous, dynamically feasible trajectories. A relational Scene Graph grounds language goals to object instances and feasible interaction regions, while topology-guided transfer connects local behaviors across sites. Local VLA skills achieve 39/60 successes (65.0%) in simulation under oracle target and feasible-handoff conditions. Under 500-ms added latency, with and without a transient command-update stall, MPAR reduces median takeover phase error by 0.212 s over nominal-time alignment. The complete system completes 21/50 simulated multi-site missions (42.0%) and is further validated on a physical articulated UAM.

Soft robots and tactile sensors have demonstrated great potential in delicate manipulation tasks. Soft pneumatic robots enable safe contact through compliance, and vision-based tactile sensors offer high-resolution touch perception. However, learning tactile manipulation with compliant robots has been challenging, bottlenecked by the lack of efficient simulation. Existing simulators typically model them in isolation, and exhibit large calibration gaps that are difficult to overcome efficiently. We present PneuTac, a unified framework for tactile-feedback manipulation with soft pneumatic robots. We leverage the material point method (MPM) for modelling the dynamics of the soft robot and the deformable tactile membrane, and 3D Gaussian splatting (3DGS) for rendering. Real-to-sim modelling is done with a simple vision-based method, to then train action and perception networks for efficient simulation with surrogate models. We use the framework to drive a tactile-guided pipeline to collect demonstrations in simulation. Through experiments on a custom-designed pneumatic soft finger with a tactile sensing tip, together with additional cross-device evaluations, we show that PneuTac is capable of accurately modelling soft robots with tactile sensors, and that policies trained with simulation-augmented demonstrations outperform baselines trained on the same real data on three real-world contact-rich compliant manipulation tasks, making it a practical framework for tactile manipulation on compliant hardware.

Teaching humanoids loco-manipulation skills, such as carrying diverse objects, via visual imitation is a promising path toward generalist robots. However, collecting diverse, high-quality interaction videos, such as clips that clearly show a person's full body and unoccluded interactions with objects, poses a practical barrier to scaling this approach. We propose PRISM, a real-to-sim-to-real framework that overcomes this limitation by amplifying a handful of real videos into a large, diverse training set. PRISM first generates hundreds of diverse "counterfactual" human-object interaction videos via video-to-video (V2V) generation from a few exemplar real videos. Our contact-anchored real-to-sim pipeline then reconstructs both human and object motions, retargeting this imperfect video data into physically plausible trajectories. The intra-class variability across these counterfactual videos lets us train a single policy that generalizes to unseen objects within each category. We demonstrate the full pipeline by deploying this policy on a real robot without any real-world fine-tuning. Using only onboard depth observations, our humanoid picks up, carries, and drops objects, including boxes, barrels, bins, and balls, across novel instances, sizes, and initial configurations.

Advancing spatial intelligence in Multimodal Large Language Models (MLLMs) is bottlenecked by the scarcity of complex, scalable 3D question-answer (QA) data. While manual annotation is labor-intensive, directly utilizing LLMs to synthesize these QA pairs often fails due to their inherent deficiencies in spatial and geometric computation. We introduce Exemplar2VQA, a scalable exemplar-driven visual question answering generation framework that rapidly synthesizes large-scale spatial QA pairs in simulated environments via multi-agent coding. By equipping collaborative agents with a meticulously designed library of geometric utilities, Exemplar2VQA bypasses LLMs' spatial reasoning flaws through deterministic code execution. Crucially, the framework exhibits remarkable versatility: taking diverse static object-centric spatial query templates as exemplars, it seamlessly and autonomously scales them into massive, high-fidelity synthetic datasets. Fine-tuning Qwen2.5-VL (3B/7B) exclusively on Exemplar2VQA-generated synthetic indoor data yields significant performance improvements across various diverse benchmarks. Furthermore, its effectiveness is not limited to in-domain indoor datasets but also robustly extends to outdoor and mixed-scene benchmarks. These results establish Exemplar2VQA as a scalable and powerful paradigm for bridging the sim-to-real gap in Embodied AI. Our code is at https://github.com/yingjiayu12/Exemplar2VQA

Grinding and sanding are fundamental processes in industrial robotic surface finishing. However, physical trials are expensive and consume workpieces, making reproducible experiments difficult. We present RoboFin3D, a sim-to-real platform built on Isaac Sim and the Newton physics engine, that provides physics-based grinding and sanding simulation for cheap and repeatable robotic surface finishing experiments. RoboFin3D utilizes a signed distance field (SDF) to model the changing geometry of the workpiece, enabling contact computation, live updates and rendering without an intermediate mesh. It additionally uses a separate surface field to model progressive surface appearance change during sanding. We also introduce WeldGen, a weld sampling module, to generate weld beads on 8,918 real-world workpiece meshes for providing diverse simulation assets. The simulation parameters are calibrated on real experimental results and our evaluation demonstrates our simulation's fidelity against the real world. We also demonstrate that simulation-generated data can be used to improve the performance of perception models. Simulation-only fine-tuning of SAM2 improves IoU for segmentation of unsanded regions from 77.15% to 84.47%, while combined synthetic and real training reaches 97.41%.

Aerial manipulators extend robotic manipulation into 3D workspaces that are difficult for ground-based robots to access, creating new opportunities for general-purpose manipulation. However, extending Vision-Language-Action (VLA) models to aerial robots introduces distinct challenges due to the tight coupling between manipulation and flight, continuously changing observations, and safety-critical physical interactions. These challenges demand diverse training data and systematic policy evaluation, yet collecting demonstrations and evaluating policies directly on physical aerial platforms are costly, difficult to scale, and hard to repeat under controlled conditions. We present AeroManip-VLA, a scalable benchmark for aerial VLA data generation and policy evaluation. AeroManip-VLA provides a GPU-accelerated simulation framework with low-level payload-aware flight and manipulation control in massively parallel environments. Building on this framework, we combine reusable reinforcement learning policies with expert task rules to automatically generate demonstrations without human teleoperation across diverse objects, environments, and randomized initial conditions. The generated data include basic skills such as grasping and placing, as well as long-horizon tasks that require both navigation and manipulation. We further introduce automated event labeling and trajectory categorization to filter demonstrations. These mechanisms enable fine-grained analysis of task progress, behavioral outcomes, and safety-related failures. Finally, we evaluate a range of imitation learning and VLA baselines across different task settings, revealing their performance characteristics and failure modes. Together, AeroManip-VLA enables scalable aerial manipulation data generation, structured trajectory analysis, and systematic VLA evaluation in simulation prior to real-world deployment.

Large-scale demonstrations have driven unprecedented progress in robot learning, yet collecting robot data through teleoperation is expensive and difficult to scale to diverse environments and long-horizon tasks. Simulation offers a scalable alternative, but existing data-generation pipelines often rely on open-loop controllers, scripted skill sequences, or task-specific programs. We introduce SkillWeaver, an agentic framework that autonomously generates robot experience by exploring over Neural Interaction Skills (NIS): reusable, parameterized, closed-loop policies that expose learned physical interaction capabilities to a reasoning agent. Given a task and a simulated environment, a VLM agent reasons about what to do next, invokes and parameterizes NIS to interact with the environment, observes their outcomes, and generates verification, reflection, and memory to guide subsequent exploration. We instantiate NIS as reinforcement-learned policies for closed-loop, contact-rich manipulation and organize exploration as verifier-guided tree search, enabling the agent to discover successful long-horizon behaviors without relying on predetermined execution pipelines. SkillWeaver scales autonomously to 39.1K demonstrations across 14.1K scenes, which we distill into visuomotor policies. Across simulation benchmarks and real-world manipulation, training on SkillWeaver-generated experience substantially improves generalization to novel objects, spatial configurations, tasks, and environments, and enables zero- and few-shot sim-to-sim and sim-to-real transfer. Our results suggest agentic exploration over neural interaction skills as a scalable alternative for robot data generation.

Human videos offer a scalable source of demonstrations for dexterous robot manipulation. However, existing human-to-simulation-to-robot (Human2Sim2Robot) pipelines rely on predefined procedures that struggle to accommodate diverse object properties and interactions, particularly those involving articulated and deformable objects. We introduce DexAgent, an agentic Human2Sim2Robot framework that converts a single egocentric human video and a task prompt into physically grounded robot trajectories for policy training. It operates through four stages: semantic understanding of human videos, property-based simulation reconstruction, robot trajectory optimization, and robot data generation. At each stage, DexAgent adapts its approach to the task and object properties by selecting suitable skills from its tool library or developing new ones when needed. Property-specific verifiers assess stage outcomes for physical validity and task-specific requirements and provide feedback for refinement, preventing error propagation through the workflow. This adaptive, verification-guided process allows DexAgent to process diverse objects and long-horizon tasks. In the final stage, DexAgent varies object and robot states in simulation to generate diverse robot trajectories from a single human video, then retextures the rendered observations to facilitate sim-to-real transfer. Newly developed skills and verifiers are retained in its tool library, making it self-evolving to accumulate reusable capabilities. This reduces processing time as DexAgent encounters more human videos. Across eleven real-world tasks, policies trained with DexAgent-generated data achieve a 3.5x higher success rate than competing baselines. Project website: https://dexagent123.github.io/.

Learning from demonstration (LfD) has enabled humanoid robots to acquire diverse whole-body skills, but extending this paradigm to human-object interaction (HOI) is limited by the availability of robot-compatible interaction references. We present HOI-Retarget, a contact-centric retargeting method that transfers HOI onto a humanoid robot for large-scale motion-data generation. Its windowed trajectory optimization uses every labeled contact as a target in the object frame, balancing body tracking, foot support and smoothness under the robot's kinematic limits. The method can augment a single demonstration across object sizes, absorb contacts reconstructed from monocular video, and extend to several robots manipulating one object. We publicly release the code and the retargeted motion dataset.

Embodied navigation requires spatial representations that generalize across unseen environments, yet collecting large amounts of annotated data from real 3D environments is difficult. We propose NaviScale for semantic-map-based object navigation (ObjectNav), whose predictor can be trained on pairs of partial and complete semantic maps without reconstructing a complete 3D environment for every training sample. The framework generates large-scale semantic map training data by composing floorplans of real homes with room-level semantic and obstacle maps extracted from MP3D and HM3DSem. NaviScale increases data diversity in two ways: inter-room scaling increases floorplan-level structural diversity, while intra-room scaling fills each fixed floorplan with different combinations of room maps matched by room category. Visibility through Ray Casting (VisRC) converts the composed maps into partial observations that account for field of view, sensing range, and occlusion. The resulting dataset contains 192,000 semantic maps generated from 24,000 floorplans associated with 12,794 properties. With 300k training iterations and the training and inference settings described in this paper, the system reaches 64.3% SR and 34.8% SPL on HM3D, together with 43.1% SR and 16.8% SPL on MP3D, without changing the prediction architecture. Additional experiments evaluate the quality of the composed maps, the effects of semantic-segmentation errors, and deployment on a physical robot.

Agricultural robotics is advancing rapidly, yet progress remains constrained by limited field access, lack of control over field conditions, geographic variability, and seasonal crop cycles. These factors make it difficult and costly to acquire diverse agricultural datasets, resulting in limited evaluation and reduced system robustness. While other robotics domains have scaled learning and evaluation through high-fidelity simulation, agricultural robotics still lacks comparably capable tools. In this paper, we present a ROS-integrated framework, built on Isaac Sim, for large-scale procedural generation of agricultural environments. The framework supports photorealistic rendering, physics simulation, and domain randomization at scales relevant to robotics research, with built-in support for row crops, orchards, and vineyards and straightforward extensibility to additional crop categories. Project Page: https://baj31415.github.io/agrigen/

Recent advances in learning-based robot policies have demonstrated promising progress, yet they are predom- inantly evaluated in static or quasi-static environments. In dynamic manipulation, objects and scenes continuously evolve while the robot perceives, reasons, and acts. However, recent dynamic simulation benchmarks largely focus on short-horizon, reactive interactions with simple motion patterns and offer limited support for both systematic evaluation under domain shifts and model-agnostic real-time execution protocols. To bridge these gaps, we introduce MotionForge, the first large- scale simulation benchmark and data-generation pipeline tailored to jointly evaluate domain shifts and long-horizon interaction in dynamic manipulation. MotionForge comprises 40 dynamic interaction tasks spanning 11 distinct motion patterns, with dedicated support for 17 long-horizon tasks. Our benchmark introduces two key novelties: (1) a systematic evaluation protocol for assessing policy robustness under both single-factor (e.g., only backgrounds shift) and joint domain shifts (e.g., simultaneous shifts of objects, backgrounds, lighting, and speed); and (2) a decoupled, latency-aware execution protocol where the environ- ment continuously evolves independently of policy inference time. Extensive evaluations of representative general-purpose robot policies on our benchmark reveal substantial limitations under joint domain shifts. These findings expose a critical gap between current policy capabilities and the requirements of robust long- horizon manipulation of dynamic objects under domain shifts, establishing MotionForge as a comprehensive testbed for future research in embodied AI.

Large-scale manipulation demonstrations are essential for learning robust visuomotor policies, yet real-world data collection is expensive and difficult to scale. Simulation offers a promising alternative, but physical and visual discrepancies can limit the transferability of synthetic data, particularly for manipulation with soft grippers. We present PhyVisGen, a physically and visually high-fidelity framework for scalable robotic manipulation data generation. On the physical side, PhyVisGen introduces an arm-gripper coupling method based on the Incremental Potential Contact (IPC), enabling high-fidelity soft contact throughout complete manipulation trajectories. On the visual side, it combines real-scene reconstruction with real-time path tracing to generate visually realistic observations while preserving captured scene appearance. Quantitative evaluations demonstrate the physical and visual fidelity of PhyVisGen. Policies trained exclusively on synthetic manipulation demonstrations achieve 65-95% success across five real-robot tasks, without real-robot demonstration data or policy fine-tuning.

Dynamic object manipulation is essential for robots operating in real-world environments, yet methods for generating high-quality demonstrations remain limited. Methods designed for static tasks do not readily transfer to dynamic settings. Among dynamic demonstration generators, planning-based methods can fail near contact, while DOMINO-style replay simplifies dynamic interactions and may limit the experience available for policy learning. We present DynaForge, a planning-guided framework that learns residual corrections for dynamic manipulation demonstration generation. DynaForge combines low-frequency global planning with high-frequency object-centric inverse kinematics across task phases, and applies a residual policy to correct actions during dynamic interaction. An implicit curriculum groups rollouts under matched conditions and selects mixed-success groups, focusing residual reinforcement learning on the evolving competence frontier. On Can and Bottle, it uses 0.73x as many optimizer steps as vanilla GRPO at the same nominal environment-step budget, with higher observed final success rates. Across nine simulation tasks, DynaForge increases mean demonstration-generation success from 41.30% of the planning prior to 78.37%. With 800 demonstrations per task, DP3 policies trained on DynaForge data achieve 49.11% mean success, compared with 7.07% for DOMINO data. On three real-world dynamic tasks, DynaForge-trained policies achieve 30-60% success, compared with 0-10% for DOMINO-trained policies, showing the ability of DynaForge for sim-to-real transfer.

Large-scale datasets are essential for training generalist robot control policies. Collecting real-world tactile data is costly and time-consuming, motivating the use of tactile simulations. However, current tactile simulators capture only overall contact geometry and miss fine details like texture. This results in a significant domain shift between simulated and real tactile data. To address this gap, we introduce Norm2Tex, a plug-in method that augments simulations of vision-based tactile sensors with high-frequency surface details from normal map textures. By modifying the target object's depth map before a tactile simulator's rendering pipeline, Norm2Tex seamlessly integrates into different tactile simulators. We also evaluate sim-to-real transfer using material classification and a reinforcement learning task. Our results show that Norm2Tex preserves material-dependent tactile information across domains, improving texture recognition and producing material-dependent control behavior in the real world.

Scalable simulation is essential for robot data generation, policy training, evaluation, and safe iteration, yet real-world interaction is costly and conventional simulators require labor-intensive construction. We present Uranus, a data-driven robot simulator built around a joint-trajectory-conditioned autoregressive diffusion model. Uranus offers three key capabilities: (1) streaming, open-ended rollout, which receives future joint-position trajectories online and autoregressively generates one latent frame per step, corresponding to four RGB frames, without a fixed horizon; (2) low-latency generation, achieving 24 FPS after inference optimization; and (3) scalable, extensible robot control, providing a unified interface for synchronized multi-view generation across diverse robot embodiments and camera configurations. We conduct comprehensive quantitative and qualitative evaluations on both in-distribution and out-of-distribution data, providing an objective assessment of Uranus and clearly identifying its current limitations. We release the code and model weights to empower the community with practical tools and insights.

Adapting visuomotor policies to new manipulation tasks often requires substantial manual engineering or teleoperated data collection. Simulation can provide task-specific data at scale, but constructing the scene, designing expert behavior, and configuring data generation still require significant per-task effort. We present ARSTAG, an agentic Real2Sim2Real system that turns a single RGB image and a natural-language instruction directly into robot policy-learning data. A hierarchy of language agents constructs a task-scoped simulation scene, generates robot-feasible demonstrations, and expands the training distribution through task-consistent randomization, while a coordinator agent manages cross-stage feedback and recovery. Across seven manipulation tasks spanning grasping, placement, and stacking, the ARSTAG-generated demonstrations enable sim-to-real transfer of three visuomotor policy architectures to a dual-arm robot, with pi0.5 achieving an average real-world success rate of 74.6%. Ablations show that task-consistent randomization substantially improves robustness, and policy performance increases with generated dataset size. Project webpage: https://boweili666.github.io/ARSTAG/.

Multi-robot collaboration could enable more efficient and scalable solutions to complex robotic tasks, but collaboration under partial observability remains challenging. Natural-language communication offers a promising approach to coordinating robots under partial observability. However, in decentralized manipulation, jointly learning explicit inter-robot communication and skill-level action selection from multimodal demonstrations remains underexplored for small vision-language models (VLMs) intended for on-device deployment. To address this gap, we introduce RoboTalk, a synthetic data-generation pipeline and dataset of 7,950 multimodal trajectories spanning 53 mobile-manipulation kitchen tasks for training small VLMs to communicate and coordinate. The dataset includes a leader-follower planning protocol, tool calls (perception, manipulation, navigation, and communication), rationale traces, and diversified natural-language communication. Fine-tuning open-source models on our dataset can reach 77% success on novel held-out tasks, a significant improvement over the untuned open source models, which had a success rate of around ~2%.

World Action Models bring the predictive capabilities of video models into robot action generation, providing a rich foundation for modeling future visual states. Tactile sensing complements this foundation with direct measurements of physical interaction. Some existing methods use tactile features as conditioning inputs without jointly predicting future tactile states, visual observations, and actions. Our key insight is that tactile signals, like video, provide observations of the evolving world state and should be modeled as future observations alongside video. We present ME-Dex-1.0 (MachEmbodied-Dex-1.0), a unified World Action Tactile Model for joint visual, tactile, and action learning. ME-Dex-1.0 adopts a Mixture-of-Transformers architecture comprising a Video Expert, a Tactile Expert, and an Action Expert, all trained with flow matching. We use shared attention connects the experts in intermediate layers, allowing action generation to draw on learned representations of visual and tactile dynamics during joint denoising. To support multi-source heterogeneous tactile inputs, a Canonical Hand Model and a Unified Tactile Autoencoder map tactile observations from different embodiments and sensing layouts into shared spatial and latent spaces. To address the limited availability of paired visual, tactile, and action data, we develop the Agentic Tactile Data Engine, an agent-based data production platform. It supplements RoboTwin and DexJoCo with tactile data recorded directly from force sensors during trajectory replay in simulation. Experiments on the RoboTwin, DexJoCo, and ManiFeel simulation platforms, together with real robot evaluations, demonstrate improved manipulation performance using both grippers and dexterous hands equipped with tactile sensing.

Collecting real-world robot data for dexterous manipulation is costly and time-consuming. While high-fidelity physics simulators enable scalable data synthesis and policy learning, constructing deployment-ready digital twins manually remains labor-intensive, and residual visual, geometric, and dynamics gaps hinder reliable sim-to-real transfer. We present DEXTERA, an automated real-to-sim-to-real framework that transforms a single RGB image into deployable policies for dexterous manipulation across four unified stages: (1) single-image scene factorization into a static Gaussian background and interactive rigid or articulated assets with VLM-inferred physical parameters; (2) metric scene global alignment, object canonicalization, and morphology-balanced robot calibration; (3) scalable simulator task primitive construction, VR teleoperation, and object-centric trajectory synthesis; and (4) a shared multimodal policy interface supporting both imitation learning and reinforcement learning. We evaluate DEXTERA across 13 task-embodiment pairs, 2 dexterous robot platforms, and 6 policy architectures. Experimental results demonstrate that DEXTERA achieves superior visual fidelity and 3D geometric reconstruction compared to generative baselines, while cross-domain trajectory replays validate strong physical interaction consistency. Furthermore, simulation-only trained policies enable viable zero-shot real-robot deployment, while simulation-real co-training substantially improves mean physical policy success from 29.2% to 61.9% across diverse policy architectures. Project website: https://dextera-project.github.io/

Scalable machine learning in challenging underwater environments is strongly limited by the lack of labeled real-world training data. This data is often expensive and laborious to gather, making large-scale real-world data challenging to gather and curate. However, simulated data can help close the gap, enabling many learning-based tasks for underwater perception. In this work, we extend OceanSim, an IsaacSim-based underwater perception simulator, with a Synthetic Data Generation (SDG) pipeline for training models to be used in underwater scenarios. The proposed pipeline enables users to generate large, automatically labeled, photorealistic datasets with configurable scene appearance, structure, and sensor settings. We evaluate the pipeline on a real-world sea urchin detection task and study how different forms of synthetic scene variation affect sim-to-real performance. Based on these experiments, we discuss findings on our results, main limitations of the current pipeline and identify future directions for improving underwater rendering fidelity, scene diversity, and the evaluation of sim-to-real generalization. The open-source code can be found at https://github.com/umfieldrobotics/OceanSim.