Continual Test-Time Adaptation

Test-time reinforcement learning (TTRL) enables models to improve their reasoning without relying on labeled training data, but existing approaches typically optimize a large fraction of the model parameters. This raises a natural question: can effective test-time adaptation emerge when both the reward signal and the optimization space are severely restricted? We answer this question with label-free bias-only TTRL, which uses majority-vote pseudo-labels as rewards and optimizes only approximately 100K bias parameters while keeping the pretrained backbone frozen. On MATH-500, our approach reaches 76.67% accuracy, slightly exceeding our own labeled bias-steering reproduction while optimizing 76,000x fewer parameters than full-parameter TTRL. The same training procedure improves performance across vision-language and audio reasoning tasks, including MathVista, AI2D, LogicVista, and MMAU. We further show that the learned steering vectors transfer to 4,500 held-out MATH problems, indicating that the adaptation is not limited to the problems used during test-time optimization. Finally, we analyze why this highly restricted adaptation can work, showing that majority-vote reliability improves with rollout consensus and that bias subspaces with greater accessible gradient energy exhibit stronger downstream trainability. These results demonstrate that substantial test-time adaptation can emerge from optimizing a tiny bias-only subspace using entirely label-free rewards.

Test-Time Adaptation (TTA) enhances the robustness of models against distribution shifts but faces two critical challenges: error accumulation from noisy pseudo-labels and catastrophic forgetting of source knowledge. Uncertainty-based approaches designed to mitigate error accumulation often yield overconfident or computationally expensive estimates, while strategies intended to prevent forgetting via prototype replay rely on static representations that easily become misaligned as the model adapts. To address these issues, this paper proposes a novel framework, Distilling Image Prototype for Guided Test-Time Adaptation (DIPTTA). The core of the proposed approach is the introduction of a Distill Image Prototype (DIP), a compact set of synthetic images that serves as a dynamic and regenerative anchor of source knowledge. This prototype enables a dynamic feature replay mechanism that continuously generates feature prototypes aligned with the current state of the model, thus effectively preventing catastrophic forgetting. Furthermore, the DIP anchors a source-calibrated uncertainty estimation method, which provides a less biased measure of sample reliability by leveraging stable source knowledge, thereby robustly suppressing error accumulation. Extensive experiments on multiple benchmarks demonstrate that DIPTTA significantly outperforms state-of-the-art methods, particularly under severe domain shifts. The source code is available at https://github.com/LiwenWang919/DIPTTA.

Test-time adaptation (TTA) has emerged as a prominent strategy for adapting vision-language models to distribution shifts during inference. We conduct a per-sample analysis of model predictions before and after adaptation, and observe two failure modes in existing TTA methods that echo previous work. Adaptations are frequently negligible, yielding no change in the model's predictions, and more severely, they can be detrimental by flipping previously correct predictions to incorrect ones. This naturally raises a question: Can we identify and skip such negligible or harmful adaptations? In this work, we introduce a new problem of selective adaptation, which aims to determine whether a given test sample should undergo adaptation or be skipped. To this end, we propose Cross-Augmentation Similarity (CAS), a simple baseline that performs adaptation only when predictions across augmented views exhibit low similarity. Notably, CAS not only preserves but in some cases improves overall accuracy, even when skipping nearly 85% of the adaptation process. We hope other researchers will explore this new direction and surpass the performance of our baseline. Our code is available at https://github.com/sirujiang/selective-adaptation.

Open-vocabulary semantic segmentation (OVSS) relies on vision-language alignment to recognize arbitrary text-defined categories, yet this alignment is fragile under continual test-time distribution shift. Our diagnostic analysis reveals that entropy minimization drives patch-level class collapse, continual updates erode vision-language alignment, and redundant gradients from low-shift samples waste computation. We propose Diversify, Anchor, and Filter (DAF), a stabilization framework that augments entropy-based adaptation with a marginal diversity loss that resists collapse, a cross-modal anchor consistency loss that constrains feature drift relative to a frozen source model, and feature salience filtering that skips low-value backward passes to offset part of the source-anchor overhead. We evaluate on five datasets spanning natural scenes, autonomous driving, underwater imagery, and remote sensing with their corrupted variants. Across the evaluated continual shifts, DAF remains stable where entropy minimization collapses, improving mIoU by over 8 points on Pascal VOC20-C, over 9 points on LoveDA, and over 3 points on Foggy Cityscapes compared to the source model, and is robust to aggressive adaptation and learning rate choices.

Test-time adaptation (TTA) promises robustness under distribution shift by updating a pretrained model on unlabeled test data, but strict online TTA with batch size one and no access to source data is especially prone to drift or collapse. We introduce Sensitivity-Guided Erasing Adaptation (SEGA), a method for strict online continual TTA (CTTA) on corruption-style streams. SEGA uses a small number of structured erasures to probe how predictive entropy changes as information is removed, and uses the resulting per-sample sensitivity trajectories to coordinate recovery and sample selection rather than relying on raw entropy or batch statistics. This yields a practical feedback signal for long-horizon batch-size-one adaptation without periodic resets or model reservoirs. In experiments on ImageNet-C, CIFAR10/100-C, and corruption-generated aquaculture streams treated as controlled corruption-style proxies, SEGA yields consistent robustness and stability gains over strong CTTA baselines while reducing backward passes through sensitivity-based gating.

Test-time adaptation (TTA) aims to enhance the cross-domain performance of pre-trained models by adapting to unlabeled test data. While most existing TTA methods rely on backpropagation (BP) for finetuning, BP-free methods such as zeroth-order (ZO) methods are more desired in practical on-device scenarios. ZO methods rely only on forward computation, which can largely reduce the complexity and memory overhead of on-device deployment. However, ZO methods suffer from much higher variance compared with first-order methods in estimating the gradient. To address this, we propose an improved ZO method to substantially boost the performance of ZO optimization based TTA. First, we provide an observation to reveal the persistent low-rank Hessian structure of the loss during the adaptation process. Based on this insight, we then propose a loss-landscape curvature-aware zeroth-order (CAZO) method, which leverages a sliding-average estimation of the diagonal Hessian to construct a covariance matrix for anisotropic perturbation sampling. CAZO operates by freezing pretrained weights and optimizing minimal adapter parameters via forward-only passes based gradient estimation, which can substantially reduce the memory overhead compared to BP-based methods. Extensive experiments demonstrate that CAZO significantly outperforms existing TTA methods, achieving state-of-the-art performance while maintaining an excellent balance between accuracy and memory efficiency. Code is available at https://github.com/Hollyming/CAZO.

Open-vocabulary semantic segmentation (OVSS) repurposes a pretrained CLIP encoder for dense prediction without additional labeled supervision. Existing methods improve CLIP's spatial behavior either by redesigning its internal attention or by injecting features from auxiliary vision foundation models; both require access to the host's internal computation and are tailored to its specific forward pass. In this work, we propose Test-time Prototype Adaptation (TPA), a training-free plug-in that operates at the output level, leaving the host's forward pass and weights unmodified. By leveraging a lightweight transductive adaptation phase, TPA identifies confident anchor patches from the host's own output predictions on a small pool of unlabeled deployment-domain images, and aggregates their frozen DINO features into per-class prototypes; at inference, a single cosine similarity lookup against this frozen bank provides an auxiliary score fused linearly with the host's logits. TPA composes with five representative OVSS hosts spanning attention-redesign and VFM-injection designs, across three CLIP backbones, eight benchmarks, and multiple internal VFM choices. Under a single set of hyper-parameters and without per-host tuning or parameter updates, TPA consistently improves segmentation accuracy, with as few as approximately 10% of unlabeled deployment-domain images sufficing for effective bank construction on most benchmarks.

3D point cloud registration in laparoscopic surgery estimates the transformation between an intraoperative organ reconstructed from video and its preoperative mesh. Because ground-truth transformations are unavailable for real data, supervised networks are trained on synthetic organ pairs. At test time, real reconstructions differ from synthetic data and are noisy, sparse, and occluded, which degrades correspondence estimation. Test-time adaptation (TTA) can reduce this domain shift, but existing methods mainly rely on logits, entropy, class prototypes, or cache memories unavailable in registration. Registration also involves paired inputs with an asymmetric shift that primarily affects the intraoperative cloud. We analyse and modify state-of-the-art TTA methods from three families to 3D registration: model, normalization, and input adaptation. We analyze four representative approaches based on auxiliary-task model updates, backpropagation-free token purging, feature alignment, and layer-normalization calibration. We modify them to handle asymmetric shifts between preoperative and intraoperative point clouds and replace classification-based entropy objectives. Using a correspondence-based model trained on clean synthetic source data, we evaluate adaptation to corrupted synthetic and real target data on P2P and P2ILReg. For synthetic targets, we apply eight corruptions, including uniform noise and global density reduction, at five severity levels. All methods improve registration on P2P, whereas on P2ILReg only input adaptation reduces the error, while normalization adaptation degrades it. Considering the computational overhead of backpropagation-based adaptation, input adaptation is the most promising option for laparoscopic surgery, providing low inference latency and consistent error reductions across datasets. Code: https://github.com/ninaa-git/survey_pc_registration_tta

Tabular data is used extensively in many real-world use cases. Deep learning models have been developed to deal with tabular data, but generally perform poorly when the test data distribution differs from that of the training data. Researchers have proposed test-time adaptation approaches to deal with this problem. The fully test-time adaptation (FTTA) setting involves adapting deployed classifiers to shifted target distributions using only unlabeled test data. Leading FTTA methods inherit a batch-dependent approach from computer vision literature. This paper demonstrates for the first time that such approaches degrade sharply in strict streaming regimes where examples arrive and must be classified one at a time. This occurs because at a batch size of one, batch-level statistics become unavailable or poorly estimated. We argue that singleton tabular FTTA is not merely a small-batch variant of ordinary FTTA, but a distinct identifiability problem where only the location of the model's score stream remains directly observable. To address this, we propose Prequential Logit-Origin Centering (PLOC), a lightweight approach that keeps the source model frozen and shifts the logit space at each step. PLOC stores only a single running number (the mean of past logits), requires no labels, estimates no priors, and bypasses weight updates entirely. A deferred variant applies a static shift that preserves the source ranking, and thus the AUROC, exactly. Evaluated across five tabular benchmarks, three architectures (MLP, FT-Transformer, and TabTransformer), and five independent source checkpoints, PLOC significantly outperforms strong tabular and entropy-based baselines.

AI-generated image detectors deployed in open-world environments inevitably face distribution shifts as new and stronger generative models continue to emerge. Although existing methods improve cross-generator generalization through better representations or training data construction, they typically follow a static train-once-and-deploy paradigm and cannot adapt after deployment. In this work, we study open-set AIGC image detection from a test-time adaptation perspective. We propose Test-Time Curriculum (TTC), a simple and model-agnostic framework that adapts a detector on unlabeled test data through curriculum-based self-training. TTC starts from highly reliable pseudo-labeled samples and progressively incorporates harder yet informative cases, while enforcing class-balanced selection to reduce biased updates under generator shift. To further improve pseudo-label quality, we introduce Cross-Scale Pseudo-Label Refinement, which aggregates complementary evidence across multiple resolutions for more reliable adaptation, and applies noisy-or fusion at inference to strengthen final predictions. In addition, we construct AIGCGuard, a new benchmark containing 3,100 representative real images and 124,000 generated images from 40 of the most advanced open-source and proprietary text-to-image models. Extensive experiments on five benchmarks show that TTC substantially improves overall detection performance under diverse unseen-generator shifts, establishing a practical and effective test-time adaptation framework for open-set generated image detection.

In many real-world scenarios, encountering continual shifts in domain during inference is very common. Consequently, continual test-time adaptation (CTTA) techniques leveraging a teacher-student framework have gained prominence, allowing models to adapt continuously even after deployment. In such a framework, a weight-averaged mean teacher is used to produce pseudo-labels from test data for self-training. The mean teacher gets updated as an exponential moving average of the student parameters using a high value of momentum that is kept fixed even if different distributions of test data are encountered. To combat the resulting drift of the model, we propose a novel controlled teacher adaptation methodology that dynamically sets a proper momentum value depending on the quality of the incoming data. Additionally, we estimate class prototypes from the source pretrained model to help align the target data as they come in. Importantly, our method does not require access to source data or its statistics at any stage of the pipeline, making it truly source-free. We perform extensive experiments on benchmark datasets to demonstrate that our approach outperforms different state-of-the-art adaptation frameworks, many of which require access to source data.

Pre-trained Vision-Language Models (VLMs) such as CLIP achieve strong zero-shot generalization, but their performance degrades sharply under adversarial perturbations. Existing test-time adaptation methods typically rely on sample-level confidence heuristics, overlooking the intrinsic distributional structure of the data. This sample-centric approach limits robustness, as it fails to distinguish confident adversarial mispredictions from true semantic consistency. In this work, we observe that adversarial distortion is structurally brittle: while holistic representations are corrupted, semantic integrity is often preserved in the distribution of augmented views. Motivated by this insight, we propose RITA, a Robust test-tIme prompt-TAdaptation framework that shifts from sample-level estimates to distribution-level alignment. Specifically, RITA employs optimal transport to align the distribution of augmented visual features with textual prototypes, mitigating adversarial outliers and rectifying cross-modal semantic misalignment. Furthermore, we introduce a dynamic cache to progressively accumulate reliable cues from the test stream for online refinement. Extensive experiments demonstrate that RITA significantly improves adversarial robustness without compromising clean accuracy.

Deep neural nets achieve remarkable performance when training and test data share the same distribution, but this assumption frequently breaks in real-world deployment, where data undergoes continual distributional shifts. Continual Test-Time Adaptation (CTTA) addresses this challenge by adapting pretrained models to non-stationary target distributions on-the-fly, without access to source data or labeled targets, while mitigating two critical failure modes: catastrophic forgetting of source knowledge and error accumulation from noisy pseudo-labels over extended time horizons. In this comprehensive survey, we formally define the CTTA problem, analyze the diverse continual domain shift patterns that characterize different evaluation protocols, and propose a hierarchical taxonomy that categorizes existing methods into three families: optimization-based strategies (entropy minimization, pseudo-labeling, parameter restoration), parameter-efficient methods (normalization layer adaptation, adaptive parameter selection), and architecture-based approaches (teacher-student frameworks, adapters, visual prompting, masked modeling). We systematically review representative methods within each category and present comparative benchmarks and experimental results across standard evaluation settings. Finally, we discuss the limitations of current approaches and highlight emerging research directions, including the adaptation of foundation models and black-box systems, thereby providing a roadmap for future research in robust continual test-time adaptation.

Reliable confidence estimation remains a key limitation of test-time adaptation in vision-language models (VLMs), where prompt tuning improves zero-shot accuracy but often degrades calibration due to entropy-driven overconfidence. Prior approaches mitigate this using LLM-derived class attributes and contrastive regularization, yet treat attributes independently, ignoring their relational structure. We propose ARGTCA, which represents (class, attribute) pairs as nodes in a Symbolic Attribute Graph and trains a Graph Attention Network (GAT) using contrastive objectives to produce structurally informed embeddings that capture inter-attribute dependencies. We introduce two attribute selection strategies: ARGTCA-DIV for intra-class diversity and ARGTCA-DISC for inter-class discrimination. Experiments across nine benchmarks show that ARGTCA-DIV reduces average Expected Calibration Error (ECE) by approximately ~37% over baselines, while ARGTCA-DISC consistently performs as the second-best variant, reducing average ECE by approximately ~17% over baselines. These results suggest that modeling symbolic attribute interactions provides a principled approach for reliable test-time adaptation in VLMs.

Test-time adaptation (TTA) mitigates domain shifts by using incoming test data to update a model on the fly. The majority of TTA methods require resource-intensive backpropagation (BP) for model updates, particularly demanding large memory sizes, which makes it infeasible to deploy them on resource-limited devices (e.g., edge devices). To address this issue, we integrate two different techniques, zeroth-order optimization (ZOO) and model merging, under the recently established cross-device collaborative TTA (CDC-TTA) framework, where the system is composed of a mixture of resource-abundant and resource-limited devices, and the model information (e.g., model weights obtained on each device) is shared across the devices. Our method is executable on resource-limited devices by introducing ZOO, which requires only forward processing and bypasses the resource-intensive BP optimization. Concurrently, to mitigate the high-dimensional optimization difficulty caused by the side effect of ZOO, we incorporate model merging of the shared multiple models and set the merge coefficients as the optimization objective, which successfully reduces the optimization dimension. In addition, to enhance the synergistic combination of ZOO and model merging, we propose a unique preprocessing strategy that trims intra-model non-influential weights and reduces the inter-model information redundancy. We empirically confirmed the effectiveness of our method using common corruption and style-transferred image benchmarks.

Test-Time Adaptation (TTA) seeks to improve model robustness under distribution shifts by adapting parameters using unlabeled target data. However, in the absence of supervision, entropy-based adaptation is fundamentally underconstrained: multiple distinct parameter updates can achieve similarly low entropy while inducing drastically different decision boundaries. This phenomenon, known as underspecification, renders standard TTA brittle and prone to collapse into spurious modes. In this work, we reinterpret TTA through a posterior-inspired lens induced by entropy minimization, where low-entropy solutions define a pseudo-likelihood over parameters. Instead of committing to a single point estimate, we introduce a particle-based diversification framework that explores multiple plausible adaptation trajectories simultaneously. Our method can be viewed as a structured exploration of multiple plausible adaptation solutions, implemented through multi-level diversification at the output, parameter, optimizer, and input levels. Crucially, the framework acts as a plug-and-play wrapper compatible with existing TTA methods. Extensive experiments on challenging benchmarks demonstrate consistent gains in stability and robustness, achieving improvements of 3-4% under mixed shifts, 2-3% with batch size one, and 1-2.5% under label shifts, outperforming state-of-the-art baselines. Our results suggest that treating TTA as a multi-hypothesis inference problem, rather than a single-point optimization task, is key to mitigating underspecification and enabling reliable real-world deployment.

Test-Time Adaptation (TTA) enables models trained on a source domain to adapt online to unlabeled test data under distribution shifts. While recent TTA methods have moved beyond static settings and begun to consider continual domain shifts, they primarily address distribution drift and fail to account for class imbalance in dynamic scenarios. In real-world test-time streams, class imbalance and continual domain shifts often occur at the same time and interact with each other. In this paper, we propose a novel Balanced and Prototype-Guided Test-Time Adaptation (BP-TTA) method, which combines batch-balanced sampling with prototype-guided adaptation to handle the class imbalance and continual domain shift problems. BP-TTA constructs balanced adaptation batches by integrating current samples with high-confidence historical instances, effectively mitigating bias toward dominant classes and stabilizing online updates. Meanwhile, BP-TTA maintains evolving class prototypes during inference and leverages prototype similarity as a constraint for model adaptation, thereby improving the reliability of pseudo-labels and enhancing the stability of online updates under persistent domain shifts. Extensive experiments demonstrate that BP-TTA consistently outperforms state-of-the-art TTA methods in dynamic test-time streaming settings.

Test-Time Adaptation (TTA) methods commonly update the affine parameters of normalization layers to adapt deployed models under distribution shifts. However, per-channel affine parameters perform axis-aligned scaling and shifting, making them geometrically incapable of correcting cross-channel structural changes induced by distribution shift. To address this limitation, we propose MixTTA, a lightweight plug-in module that equips normalization layers with a low-rank cross-channel transformation, enabling inter-channel mixing at each layer. To ensure that the low-rank branch captures only cross-channel interactions, we also propose Decoupling Projection that enforces strict separation from the diagonal affine path, along with Spectral Projection that prevents rank-1 collapse under non-stationary test streams. MixTTA can be seamlessly integrated into any existing normalization-based TTA method. Experiments in both standard and wild TTA settings show consistent improvements over strong baselines while mitigating adaptation failure under challenging conditions. The source code is publicly available at https://github.com/delta6189/MixTTA.

This paper presents a probabilistic framework for online test-time adaptation problems. In them, a model is trained on labeled data but must adapt to unlabeled data at test time under the assumption that training and test distributions potentially differ, that is, there might have been a distributional shift. The framework is based on a state-space modelling architecture from which parameter learning, parameter time evolution, prior tuning, and prediction can be characterized.

Test-time adaptation (TTA) can mitigate domain shift without source data, but it is highly brittle under adversarially contaminated test streams, where corrupted inputs also destabilize online updates. We study robust test-time adaptation (RTTA) in the adversarial-stream setting, which remains comparatively underexplored relative to standard TTA, and propose SAFER (Stochastic Augmentation Framework for Enhanced Robustness), a training-free reliability-guided augmentation wrapper for RTTA. SAFER preserves the wrapped TTA objective while replacing brittle single-view predictions with a reliability-guided pooled predictor. For each test sample, SAFER generates stochastic augmentations and aggregates their predictions through correlation-weighted pooling with outlier detection. We further study an adaptive-mixing extension that improves clean-performance retention by adjusting original-versus-augmentation weighting using feature disagreement signals. We evaluate on PACS, VLCS, and OfficeHome under PGD attacks at various attack rates. Across benchmarks, SAFER improves resilience of TTA methods to adversarial attacks while maintaining competitive clean performance.

Continual Test-Time Adaptation (CTTA) aims to maintain model performance under evolving target domains by adapting online without labeled data. However, practical deployments often cannot retain the source dataset due to privacy or licensing constraints, and purely source-free CTTA methods tend to become unstable under long-term distribution shift, suffering from compounding self-training errors and catastrophic forgetting. We introduce DO-ALL (Distill Once, Adapt Life-Long), a plug-and-play framework that revisits source information in a compact and privacy-conscious form via Dataset Distillation (DD). Before deployment, DO-ALL performs DD to produce a small set of synthetic distilled anchors that summarize the source distribution. During adaptation, each target sample is matched with its most semantically aligned anchor, which provides a stable reference for various CTTA via source replay, representation alignment, and manifold-smoothing regularization. DO-ALL can be seamlessly integrated into existing CTTA algorithms, consistently improving long-term robustness across CIFAR100-C, ImageNet-C, and the CCC benchmark. This demonstrates the potential of leveraging DD to enable stable and continuous adaptation without retaining raw source data. The code is available at https://github.com/blue-531/DOALL.

Long-context question answering (QA) remains challenging for smaller language models even when answer-bearing evidence is already present in the input. Existing within-context retrieval methods localize and expose candidate evidence chunks for the question, but they stop at input-level evidence exposure rather than adapting the query-side attention parameters that control how the model allocates attention over full-context positions. In contrast, lightweight test-time adaptation methods, such as query-only test-time training (qTTT), leave evidence localization unresolved because their generic span-level self-supervised objectives do not identify which context positions support the current answer. In this paper, we propose Evidence-Aligned SElective Test-Time Training (EASE-TTT), a within-context retrieval-augmented test-time training framework that converts selected evidence chunks into a soft attention supervision target over their token positions. Instead of replacing the full context with retrieved chunks, EASE-TTT uses the resulting attention target to guide query-side adaptation, with the adapted model generating the final answer from the original full context. Experiments on six LongBench QA tasks and three small decoder-only language models show that EASE-TTT achieves the strongest macro-average performance among full-context inference, retrieval-only baselines, and qTTT, supporting evidence-aligned test-time adaptation in long-context QA.

Data streams in real-world industrial scenarios often contain transitional operating conditions that are uncovered during offline training, leading to significant distribution shifts. To bridge the gap between static offline models and dynamic online data, a novel asymmetric adaptation-based fault diagnosis method is proposed in this paper. Specifically, in the offline stage, we employ domain generalization techniques to extract domain-invariant features from multiple stable conditions and construct robust normalized fault prototypes as reference anchors. Subsequently, during online inference, we design an online test-time adaptation method based on a periodic prototype re-projection mechanism to dynamically update prototype positions. Furthermore, we utilize the geometric distribution derived from anchors to guide the updates of classifiers and adopt an asymmetric learning rate strategy for the feature extractor and classifier. The proposed approach ensures rapid adaptation to new transitional conditions while preserving the discriminative power inherited from the offline domain generalization initialization. Experimental results demonstrate that this mechanism effectively leverages offline generalized knowledge to guide online inference, significantly improving robustness in non-stationary environments.

Test-time adaptation (TTA) enables a pre-trained model to adapt online to an unlabeled test stream under distribution shift. While most TTA research focuses on the adaptation objective, practical streams also depend critically on the memory used to select which test samples drive adaptation. Existing memory mechanisms are usually evaluated as components of specific TTA algorithms, making it difficult to isolate which memory design choices matter and when they matter. In this work, we provide a systematic benchmark that decouples memory from the adaptation algorithm and evaluates memory policies under unified conditions across i.i.d., non-i.i.d., continual, and practical test streams. Our study shows that effective memory management requires more than retaining recent or class-balanced samples. In particular, intra-class diversity is a key factor for avoiding redundant buffers and maintaining representative adaptation signals under temporally correlated and label-skewed streams. Motivated by this finding, we introduce Guided Observational Test-Time Adaptation (GOTTA), a family of diversity-aware memory policies that combine class-balanced allocation with feature-space diversity. GOTTA memories act as drop-in replacements for existing buffers and can be paired with different TTA objectives. Across corruption benchmarks and video-stream settings, diversity-aware memory improves adaptation most clearly under constrained memory budgets and challenging non-i.i.d. streams, while remaining competitive as memory capacity increases. These results highlight memory management as a first-class component of robust test-time adaptation and identify diversity as a central principle for practical TTA.

Continual Test-Time Adaptation (CTTA) aims to empower perception systems to handle dynamic distribution shifts encountered after deployment. Existing methods predominantly follow a backward-alignment paradigm, which rigidly aligns incoming data with supervisory surrogates derived from the source domain. Consequently, they struggle with unreliable supervision and evolving distribution shifts. To overcome these limitations, we introduce a novel forward-facilitation paradigm through a method termed Dynamic Style Bridging. Prior to deployment, we construct a compact knowledge base of generated class exemplars. During test time, to mitigate inherent generative bias and adapt these proxies to incoming data, we propose a multi-level bridging mechanism. This mechanism dynamically injects the proxies with incoming data styles at the input, statistical, and representation levels, while preserving the original semantics of the proxies. These high-fidelity proxies are then used to provide reliable, on-demand supervisory signals, enabling stable adaptation under continual shifts. Extensive experiments across standard CTTA benchmarks demonstrate that our method achieves consistent and substantial improvements over recent state-of-the-art approaches. Code is available at \href{https://github.com/z1358/DAS}.

Continual test-time adaptation adapts a source-pretrained model to non-stationary, unlabeled target streams while retaining past competence, yet texture-biased backbones risk error accumulation and catastrophic forgetting. Drawing inspiration from the process of decoupling shape and texture in the human visual system, we introduce MoASE, a plug-in mixture-of-experts that disentangles domain-agnostic structure from domain-specific texture using Activation Sparsity Experts with Spatial Differentiable Dropout, forming complementary high- and low-activation pathways, while high- and low-rank bottlenecks diversify representations. The Activation Sparsity Gate produces input-adaptive SDD thresholds for precise token selection, and the Domain-Aware Router assigns per-sample expert weights using texture-sensitive cues. To curb confirmation bias on unlabeled streams and stabilize supervision, we then introduce Domain-Adaptive On-Policy Distillation to constitute MoASE++, with an EMA-anchored on-policy reverse KL distillation and an augmentation policy conditioned on entropy and confidence that aligns predictions across the same views and improves the robustness-plasticity balance. Extensive experiments on classification (CIFAR-10/100-C, ImageNet-C) and semantic segmentation (Cityscapes->ACDC) demonstrate consistent state-of-the-art performance, offering a principled, controllable approach to continual adaptation in dynamic visual environments.

Test-time adaptation (TTA) has recently emerged as a promising approach for improving time series forecasting (TSF) under distribution shift. Existing TSF-TTA methods differ in how they utilize revealed targets, yet the resulting adaptation protocols remain heterogeneous and lack a clearly unified formulation. To address this issue, we revisit TSF-TTA from the perspective of protocol cleanliness and propose an adaptation protocol based solely on matured ground truth, yielding a more principled setting for adaptation. Under this protocol, we further diagnose existing adapters in the frequency domain and find that their prediction corrections often exhibit limited and weakly structured spectral modifications. Motivated by this diagnosis, we propose Frequency-Aware Calibration (FAC), a lightweight calibration method that directly parameterizes prediction corrections in the frequency domain. Across diverse datasets, forecasting horizons, and source forecasters, FAC achieves competitive and consistent performance while requiring substantially fewer trainable parameters than the compared TSF-TTA adapters.

Continual test-time adaptation (CTTA) updates a pretrained model online on an unlabeled, non-stationary stream while anchoring it to a frozen source checkpoint. This anchor is useful only when the source remains reliable. On CCC-Hard, however, a ResNet-50 source falls to approximately $1.3\%$ top-$1$ accuracy, while existing source-anchored CTTA methods continue applying the same anchor strength. We call this failure mode blind anchoring and propose RMemSafe, a reliability-gated extension of ROID that uses the frozen source's normalized predictive entropy to attenuate all explicit source-coupled uses in the objective. When the source posterior approaches uniformity, the gate closes: the source anchor and agreement filter vanish, and the objective reduces to a source-agnostic fallback comprising ROID's base losses plus marginal calibration. Combined with ASR, RMemSafe achieves the lowest error on $8$ of $9$ matched-split continual-corruption cells and is the best reset-based method on all $9$, improving ROID+ASR by $1.05$~pp on ResNet-50 and $0.48$~pp on ViT-B/16. A controlled source-degradation sweep shows a $1.13{\times}$ shallower harm slope than ROID+ASR, consistent with the graceful-decay prediction. The entropy gate detects high-entropy source collapse, not confidently wrong low-entropy sources; this scope is explicitly evaluated and discussed.

Source-free test-time adaptation (TTA) is appealing for mobile and wearable sensing because it enables on-device personalization from unlabeled test streams without centralizing private data. However, sensor-based human activity recognition (HAR) poses challenges that are less pronounced in standard vision benchmarks: behavioral inertial streams are temporally correlated and often exhibit within-session shifts caused by sensor rotation, placement change, and sampling-rate drift. Under this streaming non-i.i.d. setting, widely used vision-style TTA objectives can become unstable, leading to overconfident errors, representation collapse, and catastrophic forgetting. We propose PI-TTA, a lightweight source-free adaptation framework that stabilizes online updates through three physics-consistent constraints: gravity consistency, short-horizon temporal continuity, and spectral stability. PI-TTA updates the same small parameter subset as strong source-free baselines and incurs only modest overhead, making it suitable for on-device deployment. Experiments on USCHAD, PAMAP2, and mHealth under long-sequence stress tests and factorized shift protocols show that PI-TTA mitigates the severe degradation observed in confidence-driven baselines and preserves stable adaptation under sustained streaming conditions. It improves long-sequence accuracy by up to 9.13% and reduces physical-violation rates by 27.5%, 24.1%, and 45.4% on USCHAD, PAMAP2, and mHealth, respectively. These results demonstrate that physics-informed adaptation can improve accuracy, stability, and deployment reliability for real-world mobile sensing systems.

In this work, we study Source-Free Unsupervised Domain Adaptation under corruption-induced domain shifts, where performance degradation is caused by natural image corruptions that go beyond additive noise, including blur, weather effects, and digital artifacts. We propose a diffusion-based, input-level adaptation framework that operates entirely at test time and keeps all source-trained models frozen, explicitly targeting robustness to corrupted target inputs. Our method leverages a source-trained diffusion model as a generative prior and introduces a discriminator-guided adaptive diffusion strategy that dynamically controls the amount of perturbation applied to each test sample. Rather than relying on a fixed diffusion depth, the discriminator determines, on a per-image basis, when sufficient forward diffusion has been applied to suppress corruption-specific artifacts, with each corruption type effectively defining a distinct target domain. This adaptive stopping mechanism applies only the necessary amount of noise to remove domainspecific corruption while preserving class-discriminative structure. The reverse diffusion process then reconstructs a source-aligned image, optionally stabilized through structural guidance, which is classified using a frozen source-trained classifier. We evaluate the proposed approach across a broad spectrum of corruption-induced target domains, covering 15 diverse corruption types, and demonstrate more balanced robustness with competitive or improved performance across non-noise corruptions. Additional analyses reveal how the adaptive diffusion schedule responds to different corruption characteristics, highlighting the practicality, generality, and robustness of the proposed framework. The code is publicly available at https://github.com/fmolivato/dgadiffusion/.

Test-Time Adaptation (TTA) aims to mitigate distributional shifts between training and test domains during inference time. However, existing TTA methods fall short in the realistic scenario where models face both continually changing domains and the simultaneous emergence of unknown semantic classes, a challenging setting we term Open-set Continual Test-Time Adaptation (OCTTA). The coupling of domain and semantic shifts often collapses the feature space, severely degrading both classification and out-of-distribution detection. To tackle this, we propose DOmain COmpensation (DOCO), a lightweight and effective framework that robustly performs domain adaptation and OOD detection in a synergistic, closed loop. DOCO first performs dynamic, adaptation-conditioned sample splitting to separate likely ID from OOD samples. Then, using only the ID samples, it learns a domain compensation prompt by aligning feature statistics with the source domain, guided by a structural preservation regularizer that prevents semantic distortion. This learned prompt is then propagated to the OOD samples within the same batch, effectively isolating their semantic novelty for more reliable detection. Extensive experiments on multiple challenging benchmarks demonstrate that DOCO outperforms prior CTTA and OSTTA methods, establishing a new state-of-the-art for the demanding OCTTA setting.

Pretrained vision-language models such as CLIP exhibit strong zero-shot generalization but remain sensitive to distribution shifts. Test-time adaptation adapts models during inference without access to source data or target labels, offering a practical way to handle such shifts. However, existing methods typically assume that test samples come from a single, consistent domain, while in practice, test data often include samples from mixed domains with distinct characteristics. Consequently, their performance degrades under mixed-domain settings. To address this, we present Ramen, a framework for robust test-time adaptation through active sample selection. For each incoming test sample, Ramen retrieves a customized batch of relevant samples from previously seen data based on two criteria: domain consistency, which ensures that adaptation focuses on data from similar domains, and prediction balance, which mitigates adaptation bias caused by skewed predictions. To improve efficiency, Ramen employs an embedding-gradient cache that stores the embeddings and sample-level gradients of past test images. The stored embeddings are used to retrieve relevant samples, and the corresponding gradients are aggregated for model updates, eliminating the need for any additional forward or backward passes. Our theoretical analysis provides insight into why the proposed adaptation mechanism is effective under mixed-domain shifts. Experiments on multiple image corruption and domain-shift benchmarks demonstrate that Ramen achieves strong and consistent performance, offering robust and efficient adaptation in complex mixed-domain scenarios. Our code is available at https://github.com/baowenxuan/Ramen .

Test-time adaptation (TTA) has emerged as a promising paradigm for vision-language models (VLMs) to bridge the distribution gap between pre-training and test data. Recent works have focused on backpropagation-free TTA methods that rely on cache-based designs, but these introduce two key limitations. First, inference latency increases as the cache grows with the number of classes, leading to inefficiencies in large-scale settings. Second, suboptimal performance occurs when the cache contains insufficient or incorrect samples. In this paper, we present Prototype-Based Test-Time Adaptation (PTA), an efficient and effective TTA paradigm that uses a set of class-specific knowledge prototypes to accumulate knowledge from test samples. Particularly, knowledge prototypes are adaptively weighted based on the zero-shot class confidence of each test sample, incorporating the sample's visual features into the corresponding class-specific prototype. It is worth highlighting that the knowledge from past test samples is integrated and utilized solely in the prototypes, eliminating the overhead of cache population and retrieval that hinders the efficiency of existing TTA methods. This endows PTA with extremely high efficiency while achieving state-of-the-art performance on 15 image recognition benchmarks and 4 robust point cloud analysis benchmarks. For example, PTA improves CLIP's accuracy from 65.64% to 69.38% on 10 cross-domain benchmarks, while retaining 92% of CLIP's inference speed on large-scale ImageNet-1K. In contrast, the cache-based TDA achieves a lower accuracy of 67.97% and operates at only 50% of CLIP's inference speed.

Electroencephalography (EEG) foundation models have shown strong potential for learning generalizable representations from large-scale neural data, yet their clinical deployment is hindered by distribution shifts across clinical settings, devices, and populations. Test-time adaptation (TTA) offers a promising solution by enabling models to adapt to unlabeled target data during inference without access to source data, a valuable property in healthcare settings constrained by privacy regulations and limited labeled data. However, its effectiveness for EEG remains largely underexplored. In this work, we introduce NeuroAdapt-Bench, a systematic benchmark for evaluating test-time adaptation methods on EEG foundation models under realistic distribution shifts. We evaluate representative TTA approaches from other domains across multiple pretrained foundation models, diverse downstream tasks, and heterogeneous datasets spanning in-distribution, out-of-distribution, and extreme modality shifts (e.g., Ear-EEG). Our results show that standard TTA methods yield inconsistent gains and often degrade performance, with gradient-based approaches particularly prone to heavy degradation. In contrast, optimization-free methods demonstrate greater stability and more reliable improvements. These findings highlight the limitations of existing TTA techniques in EEG, provide guidance for future development, and underscore the need for domain-specific adaptation strategies.

Retrieval-Augmented Generation (RAG) has emerged as a powerful approach for enhancing large language models' question-answering capabilities through the integration of external knowledge. However, when adapting RAG systems to specialized domains, challenges arise from distribution shifts, resulting in suboptimal generalization performance. In this work, we propose TTARAG, a test-time adaptation method that dynamically updates the language model's parameters during inference to improve RAG system performance in specialized domains. Our method introduces a simple yet effective approach where the model learns to predict retrieved content, enabling automatic parameter adjustment to the target domain. Through extensive experiments across six specialized domains, we demonstrate that TTARAG achieves substantial performance improvements over baseline RAG systems. Code available at https://github.com/sunxin000/TTARAG.

This paper studies continual test-time adaptation (CTTA), the task of adapting a model to constantly changing unseen domains in testing while preserving previously learned knowledge. Existing CTTA methods mostly focus on adaptation to the current test domain only, overlooking generalization to arbitrary test domains a model may face in the future. To tackle this limitation, we present a novel online test-time domain generalization framework for CTTA, dubbed TestDG. TestDG aims to learn features invariant to both current and previous test domains on the fly during testing, improving the potential for effective generalization to future domains. To this end, we propose a new model architecture and a test-time adaptation strategy dedicated to learning domain-invariant features, along with prototype selection and update mechanisms for effectively managing information from previous test domains. TestDG achieved state of the art on four public CTTA benchmarks. Moreover, it showed superior generalization to unseen test domains.