World Action Models

Recent World-Action (WA) models demonstrate strong generalization ability and data efficiency, but they typically rely on expert trajectories for training. This reliance limits their ability to acquire fine-grained manipulation skills beyond the demonstration distribution and prevents them from continuously improving through real-world interaction. To address these limitations, we propose WAM-RL, a reinforcement learning framework that enables joint optimization of the world model and the action model through online interaction with the environment. By allowing the two components to co-evolve, our approach enhances fine-grained control and adaptability. Specifically, a WA model consists of a world model and an actor. We design a tailored reinforcement learning method with hierarchical optimization to coordinate their improvement. On the methodological side, we systematically investigate the effects of applying reinforcement learning to the action model, as well as online training of the world model within an RL setting. Our experiments reveal a key insight: optimizing only the actor yields improvements on short-horizon tasks, but fails to provide significant gains on long-horizon tasks. In contrast, jointly optimizing both the world model and the actor is critical for achieving strong performance in long-horizon settings. Our work is the first to introduce reinforcement learning into the World-Action paradigm, and provides insights into how online optimization of both the action head and the world model impacts overall performance.

We introduce Kairos, a regret-aware native world-action model stack for Physical AI. Kairos is motivated by the view that a physical world model should not aim to fully simulate all future pixels, but should learn and maintain the information most relevant to embodiment control: object state, spatial relations, contact conditions, task progress, action consequences, failure boundaries, and deployment uncertainty. Kairos establishes three model-side prerequisites toward this goal. First, it learns control-relevant information through a Cross-Embodiment Data Curriculum, which organizes open-world videos, human behavioral data, and robot interactions into an intervention-strength progression from passive physical observation to intentional behavior and embodied action grounding. Second, it maintains control-sufficient states through a unified understanding, generation, and prediction architecture equipped with Hybrid Linear Temporal Attention, where local, mid-range, and global temporal pathways support multi-timescale state maintenance under efficient inference. Third, it deploys these states through a Deployment-Aware System Co-Design, treating latency, memory footprint, and hardware compatibility as first-order constraints for future observation, action, and feedback loops. Experiments on embodied world-model benchmarks, world-action benchmarks, long-horizon generation, and inference-efficiency evaluation show that Kairos achieves superior performance while offering a favorable efficiency to capability trade-off.

World action models~(WAMs) have shown great promise for autonomous driving and urban navigation. Built upon Vision-Language-Action models or video generation models, existing approaches suffer key limitations: (1) High inference latency due to future observation prediction at test time, and (2) tightly coupled video and action modeling leading to representational mismatch and degraded generalization. To address both issues, we propose Metis, an end-to-end WAM framework that decouples video generation and action prediction. Specifically, Metis employs a Mixture-of-Transformers architecture with dedicated experts for video generation and action prediction, preserving the intrinsic distributional properties of each task. To enhance efficiency, we introduce an asymmetric attention mask that enables joint training of both experts while allowing the action model to bypass explicit video generation during inference. This design ensures training-inference consistency and significantly reduces computational costs without compromising planning performance. Extensive experiments demonstrate state-of-the-art performance on the NAVSIM navhard and navtest benchmarks and the CityWalker navigation benchmark, validating both the generalizability and efficiency across diverse tasks. Real-robot deployments further confirm the practical feasibility of our approach.

Vision-Language-Action models (VLAs) leverage large-scale vision-language pretraining for semantic robot control, but often lack explicit foresight into how robot actions change the scene. World-Action Models (WAMs) address this limitation by conditioning policies on predicted futures, yet existing approaches typically rely on computationally expensive video generation with substantial pixel-level redundancy. We present LaWAM, a Latent World Action Model that exposes predictive dynamics to robot policies through compact latent visual subgoals instead of reconstructed future video. At the core of LaWAM is a latent-action-conditioned Latent World Model (LaWM). We obtain LaWM by training a latent action model in the latent space of a pretrained vision foundation model and repurposing its forward decoder to predict future observation features for scene evolution. LaWAM then conditions action generation on these predicted latent visual subgoals to enable dynamics-aware robot control. LaWAM achieves state-of-the-art or competitive success rates (SRs) across LIBERO (98.6% SR), RoboTwin (91.22% SR), and real-world manipulation tasks while retaining low-latency inference. LaWAM runs in 187 ms per action-chunk prediction and achieves up to 24x lower wall-clock latency than pixel-space WAMs.

World action models (WAMs) have recently shown promise in jointly modeling future observations and executable robot actions. However, most existing WAMs still operate in 2D video or latent spaces, where visually plausible rollouts miss the 3D spatial constraints and occluded contact geometry required for precise manipulation. While geometric foundation models offer strong priors for recovering dense 3D structure and motion from visual observations, forcing WAMs to predict the dense 4D representation introduces costly geometric decoding and slows down causal action generation. To address the trade-off, we present WAM4D, a fast 4D world action model that uses lightweight spatial register tokens as training-time future-depth readouts to transfer pretrained geometric priors into a causal video-action transformer, then removes the register branch for lightweight action inference. To prevent non-causal shortcuts, we further design causal mixture attention for the Mixture-of-Transformers (MoT) WAM backbone, defining modality-specific visibility among video, action, and geometry tokens. Comprehensive experiments on RoboTwin 2.0 and challenging real-world manipulation tasks show that WAM4D improves spatial consistency and achieves competitive action prediction while maintaining efficient inference.

This work presents RepWAM, a representation-centric world action model (WAM) built on representation visual-action tokenizers. Existing WAMs typically inherit reconstruction-oriented video tokenizers from pretrained video generation models. Although these tokenizers preserve visual fidelity, pixel reconstruction alone provides limited guidance for learning instruction-following dynamics that connect future prediction with robot control. To address this, we explore a semantic visual-action latent space for representation-centric world action modeling. Specifically, we train a representation visual-action tokenizer that maps visual inputs into aligned visual and latent action tokens. We then pretrain our WAM to jointly model future visual states and the latent actions that connect them under language instructions, followed by adaptation to real robot trajectories for closed-loop manipulation. Experiments on real-world manipulation tasks and simulation benchmarks show that RepWAM delivers strong performance across diverse manipulation settings, while ablations highlight the value of semantic visual-action tokenization over reconstruction-oriented alternatives. These results establish representation visual-action tokenization as a promising foundation for world action models and a step toward generalist robot policies. Code and weights will be available at https://github.com/wdrink/RepWAM.

World Action Models (WAMs) present a promising paradigm for robotic control via video prediction. However, current WAMs suffer from fundamental spatial bottlenecks: standard text inputs introduce referential ambiguity in cluttered scenes, while unstructured RGB predictions lack semantic grounding and remain biased by task-irrelevant backgrounds. To overcome these limitations, we introduce MaskWAM, an object-centric world-action model. By jointly integrating masks as both explicit inputs and predictions via a unified Mixture of Transformers (MoT), MaskWAM unlocks robust policy generalization. This design provides two key benefits: (1) predicting future masks yields object-centric semantic supervision that suppresses visual noise, significantly enhancing even standard text-conditioned WAMs; and (2) coupling this predictive supervision with first-frame visual prompts, such as target object masks, establishes a precise spatial anchor that substantially reduces language ambiguity. Crucially, as WAMs are inherently vision-driven architectures, direct mask conditioning yields substantially stronger guidance than text alone, establishing a precise and robust paradigm for manipulating unseen objects. Evaluations on LIBERO, RoboTwin, and real-world tasks demonstrate that MaskWAM significantly outperforms baselines in both language-clear and language-ambiguous tasks.

World Action Models (WAMs) have emerged as a new powerful paradigm for embodied intelligence, learning action-relevant visual dynamics that significantly enhance generalization and robustness. However, existing WAMs still struggle with task-relevant memory in long-horizon robotic manipulation. To address this, we present HiMem-WAM, a Hierarchical Memory-Gated WAM that integrates motion-centric latent actions, high-level skill latents, and boundary-triggered memory updates. Specifically, we develop a hierarchical latent action framework that jointly learns low-level motion and high-level skill latents, providing structured temporal abstraction. Meanwhile, a boundary-aware memory gate writes compact task states at predicted skill transitions, enabling causal inference without test-time generation of future video or optical flow estimation. Evaluated on LIBERO, LIBERO-PLUS, RMBench and real-world tasks, HiMem-WAM shows that hierarchical latents improve robustness under deployment perturbations, and the memory module substantially benefits memory-dependent long-horizon manipulation.

World-Action Models (WAMs) have emerged as a promising paradigm for embodied control by coupling future visual prediction with action generation. However, most existing WAMs rely on photorealistic future prediction, which incurs high inference latency and makes real-time robot deployment difficult. This motivates a more efficient WAM design that preserves the control benefits of future visual prediction while reducing its inference cost. We introduce Efficient-WAM, a World-Action Model that reduces the cost of future imagination while preserving its control benefit. Efficient-WAM improves inference efficiency via a compact video expert transferred from WAN-2.2-5B, token-sparse video latents, and asymmetric video-action denoising that allocates fewer sampling steps to video than to actions. Instead of optimizing the future branch for visual fidelity, Efficient-WAM treats future video prediction as a compact guidance signal for action generation. Comprehensive experiments on RoboTwin 2.0 and real-world manipulation tasks show that Efficient-WAM maintains strong action performance despite visibly coarse future predictions. While maintaining competitive control capabilities, our 1B-parameter model can reduce per-chunk latency to around 100 ms during physical deployment, achieving a 30x speedup over existing WAMs.

World-action models have emerged as a promising paradigm for robot manipulation, jointly modeling visual scene dynamics and actions to inject physical priors into policy learning. However, existing world-action models couple world prediction and action execution at the same temporal resolution, forcing the world branch to model near-term frame variations that are redundant and weakly informative. We posit that strictly binding world prediction and action execution to the same temporal rhythm may underutilize the potential of the video branch for embodied control. Therefore, we propose AHA-WAM, an Asynchronous Horizon-Adaptive World-Action Model built on a dual Diffusion Transformer (DiT) architecture that reorganizes world-action modeling around this temporal asymmetry. AHA-WAM instantiates the video DiT as a low-frequency world planner that maintains rolling key-value memory over past observations and exposes reusable layerwise latent context encoding long-horizon scene evolution, while a high-frequency action DiT executes short action chunks in closed loop by querying this context through layerwise joint attention. To support asynchronous execution, we introduce horizon-adaptive offset training and Observation-Guided Video-Context Routing (OVCR), which together let the action expert exploit long-horizon world context while remaining responsive to real-time execution state without rerunning the video DiT. Experiments on RoboTwin and real-world manipulation tasks show that AHA-WAM achieves state-of-the-art performance without any robot-data pretraining, attaining 92.80% average success on RoboTwin and 78.3% success across 4 real-world tasks, while reaching 24.17 Hz closed-loop control with a 4.59x speedup over Fast-WAM.

World Action Models (WAMs) couple a video dynamics prior to the policy and have shown encouraging results on tabletop manipulation, but iterative denoising over high-dimensional video-action latents leaves them too slow for real-time humanoid loco-manipulation. The problem is compounded by the dominant hierarchical paradigm, in which a high-level manipulation policy controls only the upper body while a low-level controller tracks coarse base commands -- placing upper and lower body in inconsistent action spaces and reducing the legs to balance-preserving locomotion. We present MotionWAM, a real-time WAM that drives autonomous humanoid loco-manipulation from a single egocentric camera by conditioning the policy on the intermediate denoising features of a video world model. MotionWAM replaces the upper-lower split with a unified motion latent and predicts whole-body motion tokens that jointly cover locomotion, torso motion, height regulation, foot interaction, and hand manipulation in a single action space. A three-stage learning framework progressively adapts the video world model to egocentric visual dynamics and to the target humanoid embodiment. On nine real-world Unitree G1 tasks, MotionWAM runs in real time, substantially outperforms Vision-Language-Action (VLA) baselines fine-tuned on the same demonstrations by over 30% in overall success rate, and executes task-driven foot interaction that decoupled upper-lower policies cannot reach. Our results suggest that video-pretrained WAMs can be lifted from tabletop manipulation to coordinated, human-like whole-body humanoid control.

World Action Models (WAMs) generalize better than standard Vision-Language-Action (VLA) policies to novel motions and environments, because a video-modeling objective lets them learn from abundant unlabeled video rather than scarce labeled robot demonstrations. This generalization is computationally expensive. To complete a task, a WAM runs over multiple inference chunks, and each chunk requires a costly denoising process. Existing acceleration methods reduce this cost by caching and reusing computation within a single chunk's denoising trajectory. Our empirical analysis reveals a substantial source of redundancy they overlook: redundancy across chunks. When a robot executes a smooth behavior, the residuals computed at a given denoising step are strongly correlated from one chunk to the next. We introduce C$^3$ache, a training-free method that caches and reuses these residuals across inference chunks at the same denoising step. Experiments on benchmarks with a Fast-WAM backbone show that C$^3$ache achieves up to a $2.5\times$ speedup in total wall-clock inference time, with negligible degradation in task success rate.

World action models inherit the predictive capability of world models, enabling action generation to be guided by anticipated future observations. However, they rely primarily on vision and often fail in contact-rich manipulation, where critical cues arise from physical interaction. In this paper, we propose Dream-Tac, a unified Tactile-World Action Model that jointly models actions, future visual observations, and tactile dynamics. Specifically, Dream-Tac introduces (i) contact-gated visuotactile fusion to selectively integrate tactile signals and (ii) a contact-aware attention bias to better regulate cross-modal interactions during manipulation. To support real-time deployment, we further design a dual-level acceleration strategy, reformulating the contact-aware bias to preserve the fused attention path during training and introducing cache-based diffusion acceleration at inference, achieving up to 2.9$\times$ faster training and 1.8$\times$ faster inference. Across six contact-rich manipulation tasks, Dream-Tac improves action accuracy by 31.7% on average, demonstrating the effectiveness of unified visuotactile world modeling.Code is available at https://github.com/LYFCLOUDFAN/Dream-Tac.

World Action Models (WAMs) extend robot policy learning by incorporating future prediction as an additional training objective, encouraging the policy to encode task-relevant temporal structure in its representations. Current WAMs often rely on large-scale generative architectures that incur high training costs and inference latency, making them difficult to deploy as efficient closed-loop policies. We propose Light-WAM, a lightweight World Action Model for efficient robot manipulation. Specifically, it is built with a compact video backbone and performs future-video supervision in a downsampled latent space, reducing the cost of video co-training while retaining its benefits for representation learning. For action prediction, Light-WAM introduces the StateFusionActionExpert, which reads adapted states from multiple backbone layers, fuses them through learned-query pooling, and directly predicts action chunks in a single forward pass. This design provides an efficient interface between video backbone representations and robot actions, avoiding the need for heavy generative action experts. Experiments demonstrate that Light-WAM maintains strong performance on LIBERO and achieves usable multi-task performance on RoboTwin 2.0, while using only 0.44B trainable parameters. It also achieves 72.03ms inference latency with 4.1GiB peak GPU memory and improved training throughput.

World Action Models (WAMs) offer a promising approach to embodied intelligence, yet existing methods rely heavily on video prediction as action priors and lack adaptive multimodal reasoning, limiting their effectiveness on long-horizon, complex tasks. We observe that WAMs require different multimodal reasoning modes under different execution contexts: textual reasoning is essential during task transitions to guide high-level action prediction, while visual reasoning is critical during fine-grained manipulation for precise control. Motivated by this observation, we propose AdaWAM, a world action model with adaptive multimodal reasoning abilities. AdaWAM integrates a lightweight dynamic router that autonomously triggers textual or visual reasoning as needed during task execution. Experiments on both simulated and real-world embodied tasks show that AdaWAM substantially improves inference efficiency while outperforming state-of-the-art embodied policies. Codes and demos are available at: https://adawam.github.io/.

World-action models (WAMs) jointly generate future video and robot actions through iterative diffusion, achieving strong performance on manipulation benchmarks but requiring tens of denoising steps, a cost that precludes real-time control. Step distillation has emerged as the natural remedy, but off-the-shelf methods break down in the joint video-action setting because video and action streams use different SNR-shifted noise schedules and reach training with substantially different marginal noise distributions, an asymmetry that single-modality distillation methods cannot accommodate. We introduce Flash-WAM, a modality-aware step-distillation framework inspired by consistency distillation that selects the consistency function for each modality to match its noise regime: a linear-gradient-scaling parametrization for the action stream's low-noise regime, paired with a variance-preserving parametrization for the video stream's high-noise regime, grounded in a structural analysis of the consistency-function family that characterizes the achievable gradient scaling under the consistency boundary condition. Instantiated on LingBot-VA, Flash-WAM compresses inference to a single step in each modality. On RoboTwin 2.0, this reduces per-chunk latency from $8.1$ seconds to $348$ ms on NVIDIA L40S, a $23{\times}$ speedup that enables real-time inference. Flash-WAM preserves task success on simulation benchmarks ($85.5\%$ RoboTwin 2.0, $95.7\%$ LIBERO) and substantially recovers real-world performance ($60\%$ average on a Unitree G1 humanoid robot), while naive consistency distillation drops to $24\%$ at the same step budget.

Recent World Action Models (WAMs) have demonstrated impressive capabilities in embodied decision-making. However, whether their effectiveness stems from explicit future imagination during inference or representation learning induced by predictive training remains an open question. Emerging evidence suggests the primary advantage lies in learning robust latent representations rather than generating future observations at test time. Nevertheless, existing WAMs mainly rely on RGB-based future prediction, which provides limited structural and spatial understanding of complex environments. To address this, we propose a structured world modeling framework that enhances latent representations through geometric and semantic supervision. Alongside future RGB prediction, our model introduces two auxiliary prediction branches for future geometry and semantic representations, enabling it to jointly capture scene dynamics, spatial geometry, and semantic context within a unified latent space. Crucially, our approach preserves efficient inference by avoiding explicit future rollout or video generation at test time. Extensive experiments show that incorporating structured world supervision consistently improves action prediction accuracy, scene understanding, and robustness under challenging embodied scenarios, highlighting its potential for advancing scalable and efficient WAMs.

Vision-language navigation (VLN) for UAVs demands grounding free-form instructions into 6-DoF flight under partial observability. While Vision-Language-Action (VLA) models excel at semantic reasoning, they suffer from brittleness due to geometric inconsistency and dynamics mismatch. To address this, we propose ImagineUAV, an imagination-driven framework leveraging cascaded world-action modeling. Instead of direct regression, ImagineUAV employs a latent video diffusion model to generate instruction-conditioned future observations, explicitly imagining environmental evolution, from which 6-DoF motions are inferred via an action extractor. A kinodynamic planner then refines these estimates into collision-free trajectories. Additionally, a step-distilled inference pipeline ensures real-time execution. With only 1.3B parameters, ImagineUAV outperforms prior VLN and VLA baselines on benchmarks and real-world flights, validating the practicality of imagination-driven aerial navigation.

Vision-language-action (VLA) policies and World-Action Models (WAM) represent two increasingly important paradigms for robotic manipulation. However, it remains unclear whether future prediction in WAMs leads to behaviorally meaningful improvements beyond final task success. In this paper, we ask whether WAMs merely add future prediction, or whether they change robot behavior and internal representations in ways that are actionable for control. We introduce a model-agnostic diagnostic framework that compares WAMs and VLAs through two complementary lenses: behavioral rollout analysis and sparse-autoencoder-based feature analysis. The behavioral protocol measures action dynamics consistency, target-object progress, distractor disturbance, and runtime cost. The feature-space protocol characterizes internal representations as memorized, reactive, or predictive, revealing whether models encode future-oriented structure. Across LIBERO and RoboTwin2.0, we evaluate 7 policies spanning direct VLAs and joint, sequential, and auxiliary WAMs. Our results show that success alone hides key differences: WAMs often improve object-level behavior and target selectivity, but their gains depend on architecture and incur higher inference cost. Sequential WAMs show the clearest predictive structure, while auxiliary and joint WAMs respectively compress or entangle future information. These findings suggest future directions for WAMs design to preserve behaviorally actionable future representations for efficient manipulation.

Pretrained foundation models have become an important basis for end-to-end autonomous driving. In contrast to vision-language models pretrained primarily on static image-text pairs, video generative models capture temporal dynamics and motion priors that are naturally suited for driving. We present DriveWAM, a driving world-action model that adapts a pretrained video diffusion transformer into an autoregressive video-action policy. DriveWAM organizes video and action streams into a unified temporal token sequence and trains them under a joint flow-matching objective, preserving the pretrained video-generation architecture while adapting its large-scale video priors to action generation. To incorporate high-level scene understanding, we introduce scene-evolving driving guidance, where a frozen VLM produces chunk-specific semantic intent to guide video-action generation. To keep long-horizon rollout bounded, we further introduce selective KV memory, which maintains bounded modality-aware video and action memory pools through relevance-redundancy cache selection at inference time. Experiments on NAVSIM and the PhysicalAI-Autonomous-Vehicles benchmark show that DriveWAM achieves strong planning performance, and a data-scaling study from 4k to 100k driving clips further confirms the scaling potential of world-action modeling for end-to-end autonomous driving.

World Action Models (WAMs) improve robot manipulation by using video-based future representations to condition action generation. In pixel-space WAMs, however, the best action condition is not necessarily the fully denoised video. Controlled denoising-depth scans show that video refinement can reduce action error up to a state-dependent point, after which the gain may saturate or even reverse when late predictions become less action-relevant or physically unreliable. This suggests that action generation should use a state-dependent point along the video noise trajectory rather than a fixed terminal denoising depth. We introduce State-Adaptive Noise Trajectory Scheduler (SANTS), a lightweight scheduler for video-to-action diffusion policies. At each video decision point, SANTS reads the current video-state representation and noise level, then jointly predicts a cumulative stopping hazard and a relative noise-progression ratio. SANTS is post-trained with a path-level reward computed after the frozen action branch generates the final action chunk, so the scheduler is optimized for downstream action quality rather than intermediate video fidelity, while redundant video-state updates are explicitly penalized. Experiments show that SANTS reaches $94.4\%$ overall success on RoboTwin 2.0 and $73.1\%$ average success across seven real-robot tasks, while reducing latency by $81.7\%$ and $79.0\%$ relative to full video denoising, respectively. These results indicate that adaptive selection along the video noise trajectory can preserve the control benefits of WAM-style future reasoning while removing much of its redundant inference cost.

Robot policy learning benefits from world-action models that capture environment dynamics, but pixel-level prediction entangles dynamics with nuisance factors such as lighting and texture, making learned representations vulnerable to task-irrelevant visual variation. We propose JOPAT, a JOint Pixel-And-Track World-Action Model that predicts latent visual observations, 2D point tracks with visibility, and actions in a single denoising diffusion transformer. The key insight is that tracks provide an explicit representation of motion that captures long-horizon dynamics and remains robust under occlusion or partial out-of-frame motion, offering greater utility than modeling pixel appearance alone. On LIBERO and real-world LeRobot tasks, JOPAT improves over pixel-based baselines, with the largest gains on long-horizon tasks involving occlusion, object interaction, and off-screen motion.

Aerial vision-language navigation (VLN) requires agents to follow natural-language instructions through closed-loop perception and action in 3D environments. We argue that aerial VLN can be formulated as a prediction-driven world-action problem: the agent should anticipate latent world evolution and act according to the predicted consequences. To this end, we propose WorldVLN, the first autoregressive world action model for aerial VLN. Unlike full-sequence video-generation world models that generate an entire visual clip, WorldVLN adapts a latent autoregressive video backbone to predict short-horizon world-state transitions and directly decodes them into executable waypoint actions. After each action segment is executed, newly received observations are encoded back into the autoregressive context, enabling closed-loop world-action prediction. We further introduce a two-stage training framework that first grounds the video prior in instruction-conditioned navigation dynamics and then develops Action-aware GRPO, the first reinforcement learning method tailored to autoregressive WAMs, to optimize waypoint decisions through their downstream rollout consequences. On public outdoor and indoor benchmarks, WorldVLN consistently outperforms existing Vision-Language-Action baselines with 12%+ success-rate gains and larger advantages on challenging cases. It further transfers zero-shot to real drone deployment, suggesting that the proposed WorldVLN offers a promising route for spatial action tasks. Demos and code are available at https://embodiedcity.github.io/WorldVLN/.

Vision-Language-Action (VLA) models have achieved strong semantic generalization for embodied policy learning, yet they learn reactive observation-to-action mappings without explicitly modeling how the physical world evolves under intervention. A growing body of work addresses this limitation by integrating world models, predictive models of environment dynamics, into the action generation pipeline. We term this emerging paradigm World Action Models (WAMs): embodied foundation models that unify predictive state modeling with action generation, targeting a joint distribution over future states and actions rather than actions alone. However, the literature remains fragmented across architectures, learning objectives, and application scenarios, lacking a unified conceptual framework. We formally define WAMs and disambiguate them from related concepts, and trace the foundations and early integration of VLA and world model research that gave rise to this paradigm. We organize existing methods into a structured taxonomy of Cascaded and Joint WAMs, with further subdivision by generation modality, conditioning mechanism, and action decoding strategy. We systematically analyze the data ecosystem fueling WAMs development, spanning robot teleoperation, portable human demonstrations, simulation, and internet-scale egocentric video, and synthesize emerging evaluation protocols organized around visual fidelity, physical commonsense, and action plausibility. Overall, this survey provides the first systematic account of the WAMs landscape, clarifies key architectural paradigms and their trade-offs, and identifies open challenges and future opportunities for this rapidly evolving field.

A plausible scene evolution depends on the maneuver being considered, while a good maneuver depends on how the scene may evolve. Existing World Action Models (WAMs) largely miss this reciprocity, treating world prediction and action generation as either isolated parallel branches or rigid predict-then-plan pipelines. We formalize this perspective as World-Action Interactive Models (WAIMs), and instantiate it in autonomous driving with DAWN (Denoising Actions and World iNteractive model), a simple yet strong latent generative baseline. DAWN operates in a compact semantic latent space and couples a World Predictor with a World-Conditioned Action Denoiser: the predicted world hypothesis conditions action denoising, while the denoised action hypothesis is fed back to update the world prediction, so that both are recursively refined during inference. Rather than eliminating test-time world evolution altogether or rolling out the full future in pixel space, DAWN performs a short explicit latent rollout that is sufficient to support long-horizon trajectory generation in complex interactive scenes. Experiments show that DAWN achieves strong planning performance and favorable safety-related results across multiple autonomous driving benchmarks. More broadly, our results suggest that interactive world-action generation is a principled path toward truly actionable world models.

World Action Models (WAMs) have emerged as a promising paradigm for robot control by modeling physical dynamics. Current WAMs generally follow two paradigms: the "Imagine-then-Execute" approach, which uses video prediction to infer actions via inverse dynamics, and the "Joint Modeling" approach, which jointly models actions and video representations. Based on systematic experiments, we observe a fundamental trade-off between these paradigms: the former explicitly leverages world models for generalizable transit but lacks interaction precision, whereas the latter enables fine-grained, temporally coherent action generation but is constrained by the exploration space of the training distribution. Motivated by these findings, we propose HarmoWAM, an end-to-end WAM that fully leverages a world model to unify predictive and reactive control, enabling both generalizable transit and precise manipulation. Specifically, the world model provides spatio-temporal physical priors that condition two complementary action experts: a predictive expert that leverages latent dynamics for iterative action generation, and a reactive expert that directly infers actions from predicted visual evolution. To enable adaptive coordination, a Process-Adaptive Gating Mechanism is proposed to automatically determine the timing and location of switching between them. This allows the world model to drive the reactive expert to expand the exploration space and the predictive expert to perform precise interactions across different stages of a task. For evaluation, we construct three training-unseen test environments across six real-world robotic tasks, covering variations in background, position, and object semantics. Notably, HarmoWAM achieves strong zero-shot generalization across these scenarios, significantly outperforming prior state-of-the-art VLA models and WAMs by margins of 33% and 29%, respectively.

World Action Models (WAMs) are an emerging family of policies that tie robot action generation to future-observation modeling. In this work, we focus on the joint video--action modeling paradigm, where actions and imagined future observations are co-generated along a shared denoising or flow trajectory, so that perception, prediction, and control are coupled within one generative process. Existing WAMs typically realize this paradigm with a Mixture-of-Transformers (MoT), where video and action tokens interact through shared self-attention. This architecture can in principle assign a separate timestep $t_f$ to each predicted latent frame, yet current systems collapse this degree of freedom onto a single shared scalar $t$. Under the noise-as-masking view of Diffusion Forcing, this shared schedule imposes the unjustified prior that every predicted latent is equally reliable for action generation. We instead view the per-latent schedule as a learnable information-gating policy: by changing a latent frame's noise level, the policy modulates the reliability of its Key/Value contribution to the action tokens. We propose NoiseGate, which combines independent per-latent timestep sampling during backbone training, a lightweight Gating Policy Network that emits per-latent time increments during denoising, and task-reward optimization that trains the schedule policy without hand-crafted shape priors. Built on a joint video--action MoT backbone, NoiseGate delivers consistent gains on diverse RoboTwin random-scene manipulation tasks.

World Action Models (WAMs) enable decision-making through imagined rollouts by predicting future observations and actions. However, the reliability of these imagined futures remains under-examined: is a generated future merely visually plausible, or is it dynamically compatible with the action sequence it claims to model? In this work, we identify action-state consistency, the alignment between predicted actions and induced state transitions, as a missing reliability axis for WAMs. Through a systematic study across representative joint-prediction and inverse-dynamics models, we find that action-state consistency systematically separates successful and failed rollouts across many tasks and follows similar success-failure trends as learned value estimates. These results suggest that consistency captures decision-relevant structure beyond visual realism. We further identify background collapse as an important boundary condition, where low-dynamics failed trajectories can become deceptively consistent because static futures are easier to predict. Building on these findings, we introduce a value-free consensus strategy for test-time selection, which ranks candidate rollouts by agreement among predicted futures. This strategy improves success rates on RoboCasa and RoboTwin 2.0 without additional training or reward modeling. Taken together, our findings establish action-state consistency as both a diagnostic tool for evaluating WAM reliability and a practical signal for value-free planning.

World Action Models (WAMs) enhance Vision-Language-Action policies by jointly predicting scene evolution and robot actions, but existing methods usually represent the predicted world as holistic images, video tokens, or global latents. These representations are difficult for an action decoder to address when an instruction refers to a particular object, especially under scene shifts where object identity is entangled with context. We propose OA-WAM, an Object-Addressable World Action Model for robust robot manipulation. OA-WAM decomposes each frame into N+1 slot states, with one robot slot and N object slots. Each slot contains a persistent address vector and a time-varying content vector, and is fused with text, image, proprioception, and past-action tokens in a block-causal sequence. A world head predicts next-frame slot states, while a flow-matching action head decodes a 16-step continuous action chunk in the same forward pass. Addressability is enforced by routing cross-slot attention through address-only keys and resetting the address slice at every transformer layer, separating which object to act on from what that object currently is without adding extra tokens. OA-WAM matches strong VLA and WAM baselines on LIBERO (97.8%) and SimplerEnv (79.3%), reaches state-of-the-art performance on the most relevant LIBERO-Plus geometric axes, and remains competitive on the seven-axis aggregate. A causal slot-intervention test yields a swap-binding cosine of 0.87, versus at most 0.09 for holistic baselines. These results suggest that addressable object states provide an effective interface for robust world-action modeling under scene perturbations.

World action models (WAMs) provide a powerful generative framework for embodied control, yet transferring knowledge across heterogeneous WAMs remains challenging due to mismatched latent interfaces, high adaptation cost, and the rigidity of conventional distillation objectives. We propose CKT-WAM, a parameter-efficient Context Knowledge Transfer framework that transfers teacher WAM's knowledge into a student WAM through a compact context in the text embedding space, rather than output imitation or dense hidden-state matching. Specifically, CKT-WAM extracts intermediate teacher hidden states, reduces the number of tokens via compressors' learnable-query cross attention (LQCA), and transforms them through an always-on generalized adapter, a lightweight router, and sparsely activated specialized adapters. The resulting context is then appended to the student's conditioning textual embeddings, thereby injecting the transferred knowledge into the student with minimal architectural modification. Experiments show that CKT-WAM consistently improves zero-shot generalization and achieves the best overall performance on LIBERO-Plus, reaching 86.1% total success rate with only 1.17% trainable parameters, while approaching full fine-tuning performance. Beyond simulation, CKT-WAM also demonstrates strong real-world long-horizon manipulation ability, achieving the best average success rate of 83.3% across four multi-step and long-horizon tasks. Code is available at https://github.com/YuhuaJiang2002/CKT-WAM.