Hybrid Machine Learning for Articulation Angle Estimation of Truck-Semitrailer Combinations
Authors: Qixuan Zhang, Jonas Boettcher, Simon F. G. Ehlers, Marvin Stuede
Abstract
Accurate articulation angle estimation of trucks with trailers is critical for autonomous driving and advanced driver assistance system (ADAS). Existing methods either require manual initialization, additional sensors, or prior knowledge and signals from trailers, or they lack real-world validation, limiting practical deployment. This paper presents multiple learning-based models to directly estimate articulation angles from visual and kinematic inputs, eliminating the need for dedicated driving maneuvers for initialization, bounding box annotations, trailer-mounted sensor signals, or prior knowledge of trailer parameters. Two learning-based models are integrated with a kinematic model within an extended Kalman filter (EKF) framework, and an adaptive weighting scheme based on uncertainty quantification is applied for measurements involving visual input. Extensive real-world experiments with different trailer types demonstrate the approaches' robustness and generalization under out-of-domain conditions, including new trailers, varying colors, and lighting conditions. Results show that the hybrid method achieves accurate and reliable articulation angle estimation while maintaining reduced implementation requirements and practical deployment advantages.
This paper presents a novel non-linear mathematical model of an articulated tractor-trailer system that can be used, in combination with receding horizon techniques, to improve the performance of path tracking tasks of articulated systems. Due to its dual steering mechanisms, this type of vehicle can be very useful in precision agriculture, particularly for seeding, spraying and harvesting in small fields. The articulated tractor-trailer system model was embedded within a non-linear model predictive controller and the trailer position was monitored. When the kinematic of the trailer was considered, the deviation of trailer's position was reduced substantially alongside not only straight paths but also in headland turns. Using the proposed mathematical model, we were able to control the trailer's position itself rather than the tractor's position. The Robot Operating System (ROS) framework and Gazebo simulator were used to perform realistic simulations examples.
Autonomous driving technology has rapidly evolved over the past decade, offering significant improvements in transportation efficiency, safety, and cost reduction. While much of the progress has focused on highway driving and obstacle avoidance, low-speed maneuvers such as parking remain among the most difficult challenges for autonomous systems. This challenge is especially pronounced in trailer-truck transport vehicles due to their articulated motion and environmental constraints. This paper presents a proposed framework for autonomous truck parking that integrates perception, motion planning, control systems, and infrastructure awareness. By combining sensor fusion, Hybrid A* path planning, nonlinear model predictive control (NMPC), and data-driven parking systems, this work highlights the importance of system-level coordination for reliable and scalable autonomous parking solutions. As a proof-of-concept implementation, we adapted an open-source A* path planning simulation to incorporate a tractor-trailer kinematic model, demonstrating articulated vehicle path planning within a command-line simulation environment, with jackknife prevention identified as an area requiring further development.
Autonomous and safe navigation of tractor-trailer systems requires accurate, real-time collision avoidance and dynamically feasible control, particularly in cluttered and complex agricultural environments. This is challenging due to their articulated, deformable geometries and nonlinear dynamics. Traditional methods oversimplify vehicle geometry or rely on precomputed distance fields that assume a known map, limiting their applicability in dynamic, partially unknown environments. To address these limitations, we propose a geometric neural encoder that provides fast and accurate distance estimates between the full tractor-trailer body and raw LiDAR perception, enabling real-time, map-free geometric reasoning. These learned distances are integrated into a Model Predictive Path Integral (MPPI) controller, allowing the system to incorporate true articulated geometry directly into its cost evaluation and enabling more responsive navigation in challenging agricultural settings. Simulation results demonstrate that the proposed framework generates dynamically feasible and safe trajectories for navigating tractor-trailer systems in cluttered and complex environments.