cs.RONov 15, 2026

Real-Time Air Pollution Monitoring and Tracking via Adaptive Density-Driven Multi-UAV Coordination

Authors: Julian Martinez, Ruchika Singh, Mohammad Afrazi, Kooktae Lee

Organizations: Department of Mechanical and Aerospace Engineering, Texas Tech University, Lubbock, TX 79409 USA · Department of Mechanical Engineering and Materials Science, Duke University, Durham, NC 27708 USA

Abstract

Accurate and timely air pollution monitoring and tracking are critical for protecting public health and supporting effective environmental management. This paper presents an adaptive Density-Driven Control (D2^2C) framework for coordinating multiple unmanned aerial vehicles (UAVs) to track and map dynamically evolving pollutant distributions. The proposed framework extends the D2^2C strategy to guide UAV trajectories based on predictive pollutant propagation and dynamically updated reference densities. A sensor-driven surrogate plume update mechanism is employed, in which reference samples are propagated using locally sensed concentration gradients and wind estimates through gradient attraction, wind advection, inter-sample repulsion, and stochastic diffusion, enabling UAVs to maintain an accurate spatio-temporal representation of the pollution field. The framework utilizes a coordinated structure where individual UAVs share their local measurements with a central coordinator to maintain a unified set of reference samples, facilitating systematic target allocation and trajectory planning. Simulation results under both mild and strong wind conditions demonstrate that the proposed method significantly outperforms state-of-the-art baselines in terms of Sinkhorn distance. Specifically, in scenarios where the plume drifts beyond a fixed monitoring domain under high-velocity, time-varying wind fields, the tested baseline methods fail to maintain tracking, whereas the proposed D2^2C framework successfully adapts to the evolving distribution. These findings highlight D2^2C as an efficient and resilient solution for atmospheric monitoring in dynamic environments.

Figures & tables

Explore similar work

Jun 30, 2026

Diffusion-based 4D Trajectory Prediction and Distributed Control for UAV Swarms

Accurate 4D trajectory prediction and closed-loop tracking are essential for Unmanned Aerial Vehicle (UAV) swarms to achieve safe and efficient operations in complex low-altitude environments such as urban airspaces, industrial sites, and indoor facilities. However, this task remains challenging due to intrinsic nonlinearity of UAV swarm dynamics and strict real-time constraints of swarm formation control. To address these challenges, we propose a unified framework that couples coarse-to-fine trajectory forecasting with uncertainty-aware Distributed Nonlinear Model Predictive Control (DNMPC). Our approach features two key innovations: 1) a dimension-decoupled trajectory prediction module that reduces computational complexity by forecasting axis-wise motion, and 2) a diffusion-based residual dynamics refinement module that captures temporally correlated dynamic uncertainties. These refined predictions are then integrated into a DNMPC loop to ensure formation stability. We also introduce a synchronized multi-scenario 4D UAV swarm dataset spanning six representative airspace scenarios. The dataset contains over 7,900 frames of synchronized three-UAV trajectories with frame-level annotations of speed intention and target sector. Extensive experiments demonstrate that our approach outperforms state-of-the-art baselines, reducing trajectory tracking error by up to 10-15% and achieving sub-0.07,m average tracking error in complex urban and industrial environments, while maintaining real-time inference speeds of 34 FPS (sub-30 ms latency) suitable for agile flight.
Mar 25, 2026

Robust Distributed Cooperative Path-Following and Local Replanning for Multi-UAVs Under Differentiated Low-Altitude Paths

Multiple fixed-wing unmanned aerial vehicles (multi-UAVs) encounter significant challenges in cooperative path following over complex Digital Elevation Model (DEM) low-altitude airspace, including wind field disturbances, sudden obstacles, and requirements of distributed temporal synchronization during differentiated path tracking. Existing methods lack efficient distributed coordination mechanisms for time-consistent tracking of 3D differentiated paths, fail to quantify robustness against disturbances, and lack effective online obstacle avoidance replanning capabilities. To address these gaps, a cooperative control strategy is proposed: first, the distributed cooperative path-following problem is quantified via time indices, and consistency is ensured through a distributed communication protocol; second, a longitudinal-lateral look-ahead angle adjustment method coupled with a robust guidance law is developed to achieve finite-time stabilization of path following error to zero under wind disturbances; third, an efficient local path replanning method with minimal time cost is designed for real-time online obstacle avoidance.Experimental validations demonstrate the effectiveness and superiority of the  \ proposed strategy.
Oct 26, 2026

VisGeo-PipeTrack: A Visual Geometric Servo Control Framework with MPC-RCAPID Control for UAV-Based Dynamic Pipes Tracking

While unmanned aerial vehicles (UAVs) are increasingly deployed for pipeline inspection, prevailing research predominantly assumes static pipes. In real-world industrial environments, pipes often exhibit dynamic movements, such as vibrations. This imposes more stringent requirements on UAVs' adaptive control and computational efficiency than in static scenarios. Therefore, this paper proposes a servo control framework named VisGeo-PipeTrack, which utilizes geometric constraints to enable UAV tracking of dynamic pipes. To achieve efficient UAV positioning, YOLOv5 is employed to detect labels on the pipe. The positions are derived from visual geometric constraints based on these detected labels to enable precise localization. To address tracking control challenges, a model predictive control based real-time corrected adaptive PID (MPC-RCAPID) controller is proposed. This controller employs the Recursive Least Squares method for real-time model estimation and integrates rolling horizon optimization to dynamically adjust PID parameters. Experiments conducted on both the AirSim simulator and the Tello UAV platform validate the effectiveness of the proposed framework. Simulation comparisons with standard PID, fractional-order PID, adaptive PID, and fuzzy PID demonstrate that MPC-RCAPID achieves the shortest settling time (3.26 s) and the lowest average tracking error (3.52%). In physical experiments on the Tello platform, compared with standard PID control, MPC-RCAPID reduces the average tracking error by 55.52%, 26.72%, and 26.52% across the three test dimensions. These results demonstrate that VisGeo-PipeTrack facilitates efficient autonomous tracking in dynamic pipe environments.