Cross-Modal Image Registration

Slice-to-volume registration between ultrasound (US) and preoperative computed tomography (CT) imaging would enhance many minimally invasive interventions, for example by locating soft tissue structures intra-operatively that are discernible in CT. While optical tracking enables initial rigid registration, contact from the probe induces soft tissue deformations that inhibit accurate alignment. In this work, we introduce a deformable CT-ultrasound registration framework that incorporates anatomical priors derived from CT to improve registration under deformation. Rigid registration is first established using a robot-assisted optical tracking system, after which a deformable transformation is estimated using a sinusoidal implicit neural representation (SIREN) optimized per frame. Tissue stiffness is approximated from CT-based HU values and used as spatially varying regularization, suppressing deformation in rigid structures such as bone while allowing more flexibility in soft tissue. Two additional constraints capture the physics of probe contact: a contact-zone displacement prior that drives the displacement field to compress tissue below the probe face, and a fan-geometry regularization term based on beam direction and convex transducer field of view. Model parameters are optimized with a normalized gradient field (NGF). The proposed approach improves alignment over rigid initialisation by 17% and outperforms classical deformable baselines while maintaining near-zero topological folding.

Cross-attention is a crucial component in learning-based image-to-point-cloud (I2P) registration. Although existing cross-attention mechanisms have achieved promising progress, attention ambiguity remains a fundamental challenge that hinders the learning of discriminative 2D-3D correspondences. To address this problem, we revisit cross-attention and establish ordinary differential equations (ODEs) to model the ideal I2P feature interaction. Based on this formulation, we develop an ODE-driven cross-attention (OCA) module that refines feature representations and attention matrices through ODEs. In practice, OCA can be seamlessly integrated into existing I2P registration frameworks. To validate its effectiveness, we incorporate OCA into five state-of-the-art baselines and evaluate on four public benchmark datasets. Experimental results demonstrate that OCA improves registration recall by up to 5%, 9%, and 15% under the standard, fine-tuning, and zero-shot settings, respectively.

Image registration and fusion aim to establish spatial correspondences from misaligned multi-modal source images, and integrate complementary information. However, in real-world imaging scenarios, source images are often affected by complex and diverse degradations, such as low illumination, noise, etc., which severely hinder the effectiveness of registration and fusion. To address this issue, we propose a mutually reinforced image registration and fusion diffusion framework via degradation-aware learning, termed Diff-RF. It explores the intrinsic coupling between registration-fusion and information restoration in the degradation conditions, enabling high-quality fusion of unregistered images under complex degradation conditions. First, the intra-modal restoration module is designed to alleviate modality-specific degradations by leveraging information within each modality, thereby providing more reliable structural representations for registration and facilitating subsequent cross-modal fusion. Second, we develop a cross-modal diffusion registration and fusion module that establishes bidirectional interaction between registration and fusion. By integrating fusion-derived visual cues and correspondence-based geometric conditions into the diffusion process, the proposed framework progressively refines spatial alignment and exploits cross-modal complementary information to achieve collaborative enhancement. Rather than treating them as independent components, degradation-aware information restoration and the collaborative optimization of registration and fusion are tightly coupled, achieving overall performance improvements. Extensive experiments on multiple extended datasets demonstrate that Diff-RF achieves superior registration accuracy and fusion quality under various degraded scenarios, exhibiting strong robustness and generalization ability.

We propose a new probabilistic model for general-purpose medical image registration that builds upon the mutual information registration criterion. It centers around a spatial interpolation technique that assumes latent voxel-wise correspondences between the images being registered. By exploiting these latent variables, we derive dedicated optimization and MCMC sampling techniques that only involve closed-form iterative updates. When applied to nonlinear registration, an efficient demons-like optimization algorithm is obtained that shows robust out-of-the-box performance across a variety of monomodal and multimodal registration tasks. We also demonstrate a corresponding sampler that can quantify, for the first time, uncertainty in multimodal registration scenarios with very high-dimensional 3D deformations. Our code, which we call BINDER (Bayesian INference for DEformable Registration), is freely available at https://github.com/ste93ste/BINDER.

Detection-free methods for image-to-point cloud registration are prone to erroneous correspondences caused by domain and modality discrepancies, limited sensitivity of feature extractors, and the presence of non-overlapping regions. The Masked Autoencoder (MAE) has shown strong performance in visual representation for images and point clouds. It may be helpful to apply this approach to image-to-point cloud registration, a task that requires unified feature extraction and accurate cross-modal correspondences. Standard MAE's random masking may overlook key regions due to limited camera views, reducing registration effectiveness. To address this, we propose the Intermodal Dual-MAE Framework (ID-MAE) with a Similarity-based RL Masking Strategy (SRLM), which adaptively masks informative positions by leveraging cross-modal similarity and reinforcement learning, thus narrowing the modality gap. Our method enhances cross-modal representation learning by enforcing representation consistency during feature extraction, thereby enabling more reliable 2D-3D correspondence estimation. Experiments on RGB-D Scenes v2 and 7-Scenes benchmarks show that our method achieves state-of-the-art performance in image-to-point cloud registration.

Accurate seafloor mapping is essential for marine science, archaeology, and environmental monitoring. However, integrating data from different sensors, such as side-scan sonar and optical cameras, collected across separate survey sessions, remains challenging due to positioning drift and sensor offsets. This paper presents a multi-session, multimodal underwater mapping framework based on factor graph optimization. The method jointly optimizes vehicle trajectories, 3D landmark positions, sensor extrinsics, and per-session global alignment transformations. By combining rigid inter-session corrections with local trajectory deformations, it compensates for both inter-session offsets and intra-session distortions from accumulated navigation errors. The proposed methodology was validated on real-world datasets collected along the Catalan coast. Results show measurable improvements in map consistency over both unoptimized and rigid-alignment baselines across all metrics, including Pixel Accuracy and mean Intersection over Union. The method achieves a 3.4% improvement in pixel accuracy over the unoptimized baseline, corresponding to improved semantic labelling across approximately 14700 $\text{m}^2$ of mapped area. Qualitative results further show consistent co-registration between sonar and optical maps, even in the presence of significant trajectory distortions and inter-session misalignments. These findings demonstrate the potential of the proposed framework to generate coherent multimodal seafloor maps from heterogeneous underwater surveys.

Multimodal image registration is a key component of many clinical workflows, yet it remains challenging because corresponding anatomical structures often exhibit substantially different image intensities across modalities. In this work, we present a comprehensive benchmark of intra-patient 3D multimodal deformable registration methods across three datasets covering different anatomical regions and difficulty levels, including both synthetic deformation recovery and real clinical scenarios. We evaluate classical optimization-based approaches and modern learning-based methods, including recent deep learning and foundation models, using complementary metrics: Average Dice similarity coefficient (DSC), average 95th-percentile Hausdorff distance (HD95), and a modality-independent structural similarity measure based on the MIND self-similarity context (MIND-SSC). Results show high variability across datasets, with learning-based methods demonstrating superior performance on large synthetic benchmarks, while only limited improvements are observed in real pelvic registration. A key finding of this study is the consistent disagreement between geometric metrics (DSC, HD95) and image-based similarity metrics (MIND-SSC), highlighting that improved overlap does not necessarily imply better global multimodal correspondence. Furthermore, anatomy-guided approaches achieve the highest overlap scores but exhibit degraded performance outside of segmented regions, revealing a trade-off between label-driven alignment and global structural coherence. Overall, our results indicate that no current method achieves robust performance across anatomies and modalities. We demonstrate that intra-patient 3D multimodal registration requires multi-criteria evaluation, including deformation-based metrics, and remains an open problem.

Unmanned aerial vehicle facade inspection can combine red, green, and blue (RGB) imagery with thermal measurements to screen surface and subsurface anomalies. However, geometric discrepancies between the sensors and thermal image rendering can obscure spatial correspondence and weak temperature contrasts. This article presents a sensor-level pipeline comprising per-sensor correction, RGB-to-thermal registration, common-support cropping, and signed local contrast encoding of 16-bit radiometric measurements. The encoding preserves the distinction between locally hotter and colder regions and supplies the fourth input channel of a compact single-stream detector. We introduce M3T, a dataset of 674 paired RGB and radiometric thermal samples from five facade-inspection projects covering eight component and anomaly categories. The median residual registration error is 3.384 pixels, and a controlled-displacement analysis characterizes how the local contrast response changes under controlled displacement. Project-grouped four-fold evaluation yields mean average precision of 0.168 over intersection-over-union thresholds from 0.5 to 0.95, using 28.50 billion floating-point operations per image. A separate single-split ablation shows improved delamination detection over RGB-only and alternative thermal inputs, although aggregate accuracy does not improve over RGB alone. Evaluation on RGBT-Tiny shows mixed performance with rendered thermal imagery. These results characterize the category-specific benefits and limitations of aligned radiometric contrast for compact facade screening.

We present DRS-VPT, a feed-forward transformer architecture for foundational image-to-scan registration. Given query images and a reference 3D point cloud, the model predicts the scan pose and point map alongside the poses and point maps of each camera, all expressed in the first camera's frame. It additionally predicts a coarse-to- fine pyramid of per-point and per-pixel features for direct reprojective alignment of the scan to the first image. This formulation unifies downstream tasks such as camera-LiDAR calibration in autonomous driving and indoor camera-to-map relocalization. A single DRS-VPT model achieves state-of-the-art performance for image-to-LiDAR registration in autonomous driving, competitive indoor relocalization without training map-specific weights, and strong zero-shot transfer to unseen environments. We also show qualitatively that the model learns complex scan-to-image projection properties such as occlusion of back-facing points.

Preoperative evaluation of trigeminal neuralgia (TN) often requires joint interpretation of structural MRI, which depicts the trigeminal nerve and surrounding cisternal anatomy, and time-of-flight MRA, which highlights vascular structures. Although MRI-MRA fusion is clinically attractive for visualizing neurovascular compression, this task is poorly captured by conventional whole-brain registration evaluation because the clinically relevant target is a small trigeminal ROI, vessel annotations are partial and clinically focused, local TOF-MRA contrast is variable, and field-of-view mismatch can limit deformable alignment. We formulate TN MRI-MRA fusion as an ROI-centered neurovascular registration-evaluation problem and construct a benchmark from 149 patients with clinician-annotated bilateral trigeminal ROIs. Six representative registration pipelines were evaluated using local image-based metrics, segmentation-derived vessel-localization metrics, prediction-volume analysis, and contrast- and FOV-stratified comparisons. Conventional evaluation summaries were often misleading: local image similarity, vessel-background separability, and downstream vessel localization did not co-rank methods; one-sided vessel distances were strongly affected by predicted vessel extent under partial annotations; and local MRA contrast determined when vessel-separability metrics were informative. Deformable refinement provided only a small, FOV-dependent benefit over affine alignment, while reader review showed that locally favorable vessel distances could coexist with globally implausible registrations. These findings indicate that TN MRI-MRA registration should be evaluated as a local, vessel-aware, contrast-sensitive, and FOV-aware visualization task rather than as generic multimodal brain registration. Our code is publicly available at https://github.com/jhuldr/TN-Reg-Benchmark.

Non-destructive X-ray and computed tomography (CT) testing are essential for ensuring the dimensional accuracy of manufactured components with complex internal structures, such as the cooling channels in gas turbine blades, which directly affect thermal performance and service life. This study presents a multipart 3D-2D rigid registration approach for aligning CAD models with X-ray projections as an alternative to CT reconstruction for part inspection and measurement. A greedy registration algorithm sequentially aligns the blade's exterior before registering its internal components by maximizing the mutual information between simulated and acquired X-ray images. This stepwise approach reduces problem complexity and improves alignment accuracy. View angles are optimized using a greedy method that iteratively selects angles to minimize dimensional measurement errors. The results indicate that a small number of oblique views provides the best accuracy, although a broad range of angles yields acceptable results. The method achieves subpixel registration accuracy, with errors below one-fifth of the magnified detector-pixel pitch. Image noise and defects reduce registration precision, but direct registration in projection space mitigates these effects compared with CT reconstruction. Appropriate view selection can therefore preserve acceptable subpixel accuracy in the presence of image noise and defects.

Multimodal satellite imagery provides complementary information for Earth Observation, but accurately combining heterogeneous sensors remains challenging in dynamic environments. Fast-changing regions, such as the Antarctic marginal ice zone, cannot fully exploit multimodal information from different satellite sensors because surface features move between image acquisitions. This spatial and temporal mismatch challenges effective perceptual grounding, violating the assumption of pixel-level correspondence that underpins most multimodal reasoning and downstream classification pipelines. Antarctic sea ice provides a challenging benchmark due to the rapid, heterogeneous drift of individual ice floes and the differing responses of sea ice to radar, visible and thermal sensing modalities. Accurate, dense supervision of sea ice remains scarce because generating pixel-wise labels requires time-consuming expert interpretation of noisy data, leading to historical reliance on coarse-resolution maritime ice charts for model training. This paper presents a novel architecture based on mutual information warping to align multi-satellite (Sentinel-1 and MODIS platforms) multimodal (visible, thermal, radar) satellite scenes. To demonstrate the approach, we introduce a sparse expert-labeled dataset of 2,088 pixel-wise annotations (7,046 expert point classifications) located at the ice-water margin interface across 43 scenes. Our results demonstrate that spatially grounding and aligning modalities prior to segmentation improves classification accuracy, and enables accurate, dense sea ice segmentation from sparse point-wise supervision.

Visible-infrared object detection relies on complementary RGB and thermal cues, but its performance is often degraded by cross-modal spatial misalignment. Most existing methods rely on implicit feature adaptation to handle weakly misaligned scenarios, while large-offset geometric discrepancies remain insufficiently addressed. In this paper, we propose a Joint Feature-domain Registration and Detection network (JFRDet), an end-to-end visible-infrared oriented object detector tailored for severely cross-modal geometric discrepancies. JFRDet introduces a Cross-Modal Affine Alignment (CMAA) module to estimate an image-level affine transformation for explicit multi-level feature alignment. Note that illumination changes directly affect the reliability of RGB cues, an Illumination-Guided Complementary Fusion (IGCF) module adaptively exploits modality reliability under varying illumination conditions for cross-modal fusion. Then, an Alignment Quality-Consistency Gating (AQCG) strategy stabilizes joint optimization by modulating detection supervision according to alignment reliability and gradient consistency. We further construct DroneVehicle Misaligned (DVMA), a benchmark for evaluating visible-infrared oriented object detection under severe cross-modal geometric misalignment. The proposed JFRDet achieves 69.7% $\mathrm{mAP}_{50}$ on DVMA, which represents state-of-the-art (SOTA) performance. The code and dataset will be available on GitHub.

Registration between cone-beam computed tomography (CBCT) and intraoral scans (IOS) is essential for patient-specific surgical planning. However, disparate imaging modalities, limited overlap, and large pose offsets make automated registration unreliable. Consequently, clinical registration remains dependent on conventional geometry pipelines and manual clinician adjustment. To address these challenges, we propose APCReg, an anatomical-prior-guided coarse-to-fine framework for global registration and reliability-controlled residual correction. Specifically, multi-view anatomical coarse registration (MACR) performs ordered orthogonal projection alignment (buccal, proximal, and occlusal) to decompose the six-degree-of-freedom search before three-dimensional refinement. Overlap-aware residual registration (OARR) combines shared KPConv features, a folded arch-length cue, overlap-gated cross-attention, and Sinkhorn matching. Finally, dental-arch-structured hypothesis selection evaluates diverse poses on held-out reliable correspondences, while a ground-truth-free coarse-retention guard conditionally retains a geometrically reliable coarse pose. On 60 held-out jaw pairs, APCReg achieves a submillimeter mean Chamfer distance of 0.87 mm and a Hausdorff distance of 2.92 mm under this evaluation protocol, and ranks first across the six reported metrics among the evaluated open-source baselines.

In digital dentistry and oral surgery, the registration of jawbone CT and intraoral scanner (IOS) data is essential for integrating internal bone structure with high-resolution dental surface geometry. However, this registration is challenging because the two modalities share only a limited region in common, and their true correspondence is generally unknown. This uncertainty has prevented rigorous quantitative evaluation of registration accuracy. In this study, we propose a pseudoIOS evaluation framework in which a point cloud emulating an intraoral scan is generated from CT data within the same coordinate frame, so that the transformation between them is known by construction and can serve as a true ground truth. Using this framework, we propose a coarse-to-fine registration method that combines a domain-generalizable local descriptor (GeDi) for initialization-independent global alignment with the iterative closest point (ICP) algorithm for local refinement, and also evaluate the influence of metal artifacts on registration. In experiments on seven cases, ICP alone frequently converged to local minima from a perturbed initial position, whereas GeDi$+$ICP maintained submillimeter mean absolute error (MAE) across all evaluated jaw and artifact conditions (0.55-0.69 mm). A three-way repeated-measures analysis confirmed that GeDi$+$ICP was significantly more accurate than GeDi alone. Metal artifacts had a statistically detectable overall effect, but their absolute impact on GeDi$+$ICP was small.

Recent detection-free approaches have shown significant efficacy in image-to-point cloud (I2P) registration by employing a coarse-to-fine matching pipeline. In the coarse stage, down-sampled image features and voxelized point cloud features are typically fused to establish initial coarse correspondences for subsequent refinement. However, existing methods largely overlook the critical role of point cloud density, which fundamentally dictates the quality of coarse correspondences and the final registration results. Specifically, excessively sparse point clouds lead to an insufficient number of inliers, while overly dense ones often introduce a high outlier ratio. Consequently, this creates an inherent density trade-off, thereby significantly limiting the registration accuracy of current approaches. For mitigating this trade-off, we propose a novel Cross-Coordinate Correspondences Pruning (CCP) strategy to acquire sufficient inliers while ensuring a low outlier ratio. To minimize interference from inter-modal coordinate discrepancies, we first project cross-coordinate coarse correspondences to the 2D image coordinate system for spatial unification. Subsequently, a lightweight pruning network is responsible for predicting the inlier confidences, which are used to filter coarse outliers, from coordinate geometric and modal feature dimensions. To maximize inlier recall, we further design a Multi-Density Point Ensemble (MDPE) strategy that consolidates and deduplicates pruned coarse correspondences across varying point cloud densities. Our method achieves a significant performance improvement, surpassing existing state-of-the-art methods by at least 8.6% in Registration Recall across various benchmarks.

Image-to-Point Cloud Registration (I2P) is essential for integrating camera and LiDAR in perception and autonomous systems, yet the modality gap between images and point clouds makes it difficult to achieve both high accuracy and strong generalization. In this paper, we propose a simple yet effective I2P method that treats LiDAR as an imaging sensor: from a single sparse LiDAR scan, we generate a dense LiDAR intensity image using Conditional Rectified Flow, match it with a camera image using a pre-trained feature matcher, and estimate the 6-DoF relative pose via PnP-RANSAC. The proposed model is pre-trained through a self-supervised image completion task and fine-tuned on a small amount of LiDAR data (neither image-point cloud pairs nor ground-truth sensor poses are required), enabling it to scale to diverse LiDAR and camera configurations. Experiments on the R3LIVE dataset show that the proposed method achieves a mean error of 4.89° / 1.63 m, outperforming existing methods, while completing a single registration in approximately 0.68 s.

Multimodal CT-MRI registration is central to image-guided radiotherapy, surgical navigation, and diagnostic workflows, but most pipelines report only aggregate quality metrics without per-case reliability signals. We propose a reliability-aware framework that converts registration quality into Green/Yellow/Red risk categories using data-learned thresholds. CT images were registered to T1-weighted MRI using rigid and affine transformations on 90 paired slices from 18 patients across brain, abdominal, and neck anatomies. Reliability was assessed using Delta NMI, Delta SSIM, Dice overlap, registration stability, and inverse consistency error, combined into a single score R. Thresholds learned from training patients were applied unchanged to held-out test patients. Affine registration outperformed rigid registration on NMI and SSIM, yielding 44% Green classifications versus 33% for rigid. Reliability-filtered registrations improved the average alignment profile compared with unfiltered methods. Per-anatomy analysis showed substantial variation, with stronger reliability for abdominal registrations than brain registrations. Weight sensitivity analysis identified Dice overlap as the dominant reliability component. The proposed framework provides an interpretable quality-control layer for multimodal registration, while risk thresholds reflect statistical rather than clinical validation.

Cross-modal image registration is essential for multi-sensor perception but remains fundamentally challenging due to severe non-linear radiometric discrepancies and geometric distortions. Existing deterministic matching methods lack uncertainty awareness, struggling to navigate the resulting highly non-convex optimization landscape and frequently accumulating errors in ambiguous regions. In this paper, we propose RBE-Flow, a novel framework that reformulates dense cross-modal flow estimation as a closed-loop recurrent Bayesian estimation problem on learned feature manifolds. Diverging from standard feed-forward regression, RBE-Flow establishes a robust self-correcting mechanism by deeply coupling feature-metric non-linear optimization with probabilistic state updates. Specifically, a Recurrent Manifold Optimization (RMO) block iteratively generates flow observations and their associated uncertainties, which are then optimally assimilated into the prior state via an Uncertainty-Adaptive Probabilistic Update (UAPU) using deterministic sigma-point projection. Crucially, the resulting calibrated posterior covariance is fed back to adaptively regularize the damping of subsequent optimization steps, allowing the system to modulate its convergence based on predictive confidence. To ensure stable probabilistic training, we introduce a hybrid supervision scheme featuring a geometry-aware rectified NLL loss that structurally prevents variance collapse. Extensive experiments on challenging OSdataset, WHU-OPT-SAR, and RoadScene benchmarks demonstrate that RBE-Flow consistently achieves state-of-the-art performance, outperforming existing methods by a significant margin, particularly under strict sub-pixel criteria. Project page: https://github.com/NEU-Liuxuecong/RBE-Flow

Full-field measurement techniques such as digital image correlation and infrared thermography are prevalent in experimental solid mechanics. Digital image correlation is used to analyze surface deformation, while infrared thermography quantifies surface temperature fields. However, sophisticated procedures are necessary to express both datasets in the same Lagrangian frame, especially when analyzing non-flat surfaces. In this study, we propose an external projection-based coupling that uses the pinhole camera model to relate two-dimensional temperature data measured by infrared thermography to three-dimensional point coordinates from stereocorrelation-based digital image correlation. Unlike existing multiview approaches, we utilize two independently calibrated industrial-grade systems and augment the experimental evaluation with the pinhole camera model. The projection matrix of the camera model is calibrated using a single image of a reference object. Through this projection, temperature fields are accurately represented at material points. Our method is particularly suited for, but not restricted to, curved surfaces and straightforward to embed in existing experimental protocols, as the image registration is kept as is. Additionally, we propose using radial basis functions as a global interpolation ansatz in both space and time to compute in-plane temperature gradients and even temperature rates on curved surfaces, thereby providing an extensive and information-rich full-field dataset.

3D/2D registration serves as a cornerstone technique in surgical navigation. Traditional iterative optimization algorithms suffer from low efficiency and high failure rates in intraoperative settings. Deep learning-based methods reformulate registration from iterative optimization to a regression problem that maps image appearance features to spatial pose, typically achieving improved real-time performance and accuracy. However, such learnable methods are confined to memory-driven retrieval of specific pose features rather than understanding the task of image alignment itself, which limits their generalization in complex scenarios. We propose LayersReg, a pioneering regression paradigm that endows the model with 3D anatomical awareness and searches for the correct pose in a progressive, layer-by-layer manner. Inspired by the iterative pose-searching optimization criterion of classical registration, LayersReg searches for correlations between the moving and fixed images in feature space, capturing the trend of pixel flow and thereby converging iteratively toward the correct spatial pose transformation. We further design a coupling of node-wise regression with the progressive registration framework to enhance the model's perception of spatial pose changes. Experimental results demonstrate that under large offsets and multimodality conditions, LayersReg achieves high accuracy on both X-ray/CT registration (0.68°, 1.41 mm) and slice localization (0.73°, 1.55 mm) tasks, outperforming existing state-of-the-art methods while meeting the intraoperative demands for precision and real-time capability.

In multi-modal image registration, the primary challenge lies in shared structural information extraction. Compared to Transformers, Structured State Space Duality (SSD) offers greater global structural feature extraction with higher efficiency during training and inference. Inspired by these advantages, we propose a novel algorithm for multi-modal image registration, named RegNetMamba-2. Our algorithm incorporates SSD into coarse-to-fine matching process to extract local and global structural features effectively. Firstly, SSD is applied in three different scales for multi-modal feature extraction in our network. To strengthen local representation, we pay more attention on foreground edge and structural information by feature scaling function of SSD. Secondly, for shared feature extraction of input images and multi-modal feature fusion in all scales, we propose cross-modality feature fusion model based on SSD, consisting of Cross-Modality feature Interaction (CMI) module and Multi-Scale feature Fusion (MSF) module. CMI module is designed for cross-modality feature extraction of each scale by SSD in cross form. MSF module is designed to employ a progressive upward fusion in feature-level to obtain fine features, consisting of multi-modal features in all scales. Following coarse-to-fine, the features in 1/8 scale from CMI and 1/2 scale from MSF are collected to calculate matching probability scores. Then we respectively establish matching process by correspondences of pixel-wise. Extensive experiments demonstrate that comparing with state-of-the-art deep-learning based algorithms, RegNetMamba-2 has achieved good effects in both performance and efficiency for multi-modal image registration on the following datasets: VIS-SAR (OSDataset), VIS-IR (LGHD/RoadSence) and VIS-NIR (RGB-NIR sense).

Cross-modal 3D medical image analysis requires voxelwise representations that remain anatomically consistent across imaging contrasts, scanners, and acquisition protocols. Recent work has shown that frozen 2D Vision Transformer (ViT) foundation models can support such representations, but typical pipelines extract features along a single anatomical axis and adapt those features inside a registration solver for one image pair at a time, leaving complementary viewing directions unused and producing representations that do not transfer to new volumes. We introduce VoxCor, a training-free fit--transform method for reusable volumetric feature representations from frozen 2D ViT foundation models. During an offline fitting phase, VoxCor combines triplanar ViT inference with a compact closed-form weighted partial least squares (WPLS) projection that uses fitting-time voxel correspondences to select modality-stable anatomical directions in the triplanar feature space. At transform time, new volumes are mapped by triplanar ViT inference and linear projection alone, without fine-tuning or registration. Voxel correspondences can then be queried directly by nearest-neighbor search. We evaluate VoxCor on intra-subject Abdomen MR--CT and inter-subject HCP T2w--T1w tasks using deformable registration, voxelwise k-nearest-neighbor segmentation, and segmentation-center landmark localization. VoxCor improves the hardest cross-subject, cross-modality transfer settings, reduces encoder sensitivity for dense correspondence transfer, and yields registration performance competitive with handcrafted descriptors and learned 3D features. This positions VoxCor as a reusable feature layer for downstream multimodal analysis beyond pairwise registration. Code, configuration files, and implementation details are publicly available on GitHub at guneytombak/VoxCor.

Infrared and Visible Image Fusion (IVIF) has shown promise in visual tasks under challenging environments, but fusion under unregistered conditions faces inherent misalignments. Current studies to solve them either predict the deformation parameters coarse-to-fine (i.e., coarse registration and fine registration) or estimate the deformation fields in multi-scales for registration. Though straightforward, they overlook the cumulative errors in registration, which contaminate the fusion stage and severely deteriorate the resulting images. We introduce the Spatial-Frequency Registration and Fusion (SFRF) framework, which incorporates uncertainty estimation and infrared thermal radiation distribution consistency into a unified pipeline to handle the error accumulation for robust registration and fusion across both spatial and frequency domains. Specifically, SFRF constructs a Multi-scale Iterative Registration (MIR) framework that iteratively refines the deformation field across scales, leveraging uncertainty estimation at each stage to mitigate error accumulation and enhance alignment accuracy dynamically. To ensure the accurate alignment of infrared thermal distributions during registration, thermal radiation distribution consistency is employed as a frequency-domain supervisory signal, promoting global consistency in the frequency domain. Based on the spatial-frequency alignment, SFRF further adopts a Dual-branch Spatial-Frequency Fusion (DSFF) module, which incorporates spatial geometric features and frequency distribution information to reconstruct visually appealing images. SFRF achieves impressive performance across diverse datasets.

Existing deep learning-based methods can capture shared features from optical and synthetic aperture radar (SAR) images for spatial alignment. However, optical-SAR registration remains challenging under large geometric deformations, because the model needs to simultaneously handle cross-modal appearance discrepancies and complex spatial transformations. To address this issue, this paper proposes a text semantic-assisted cross-modal image registration framework, named TAR, for optical and SAR images. TAR exploits text semantic priors from remote sensing scenes and land-cover categories to alleviate the modality gap and enhance cross-modal feature learning. TAR consists of three components: a multi-scale visual feature learning (MSFL) module, a text-assisted feature enhancement (TAFE) module, and a coarse-to-fine dense matching (CFDM) module. MSFL extracts multi-scale visual features from optical and SAR images. TAFE constructs text descriptors related to remote sensing scenes and land-cover objects, and uses a frozen RemoteCLIP text encoder to extract text features. These text features are introduced through visual-text interaction to enhance high-level visual features for more reliable coarse matching. CFDM then establishes coarse correspondences based on the enhanced high-level features and refines the matched locations using low-level features. Experimental results on cross-modal remote sensing images demonstrate the effectiveness of TAR, which achieves stronger matching performance than several state-of-the-art methods and yields significant gains under large geometric deformations.

Image-to-point cloud registration is often challenged by viewpoint changes, cross-modal discrepancies, and repetitive textures, which induce scale ambiguity and consequently lead to erroneous correspondences. Recent detection-free methods alleviate this issue by leveraging multi-scale features and transformer-based interactions. However, they still suffer from attention drift across layers and intra-scale inconsistencies, hindering precise registration. Inspired by human behavior, we propose a ``Focus--Sweep'' paradigm and develop a Hierarchical Focus--Sweep Interaction Module within an SSM-based framework to enhance multi-level cross-modal feature association. In addition, we introduce a Dynamic Layer Allocation Strategy that adaptively determines the iteration depth to better exploit geometric constraints and improve matching robustness. Extensive experiments and ablations on two benchmarks, RGB-D Scenes V2 and 7-Scenes, demonstrate that our approach achieves state-of-the-art performance.

Image-to-point-cloud registration (I2P) is a fundamental task in robotic applications such as manipulation,grasping, and localization. Existing deep learning-based I2P methods seek to align image and point cloud features in a learned representation space to establish correspondences, and have achieved promising results. However, when the inlier ratio of the initial matching pairs is low, conventional Perspective-n-Points (PnP) methods may struggle to achieve accurate results. To address this limitation, we propose Angle-I2P, an outlier rejection network that leverages angle-consistent geometric constraints and hierarchical attention. First, we design a scale-invariant, crossmodality geometric constraint based on angular consistency. This explicit geometric constraint guides the model in distinguishing inliers from outliers. Furthermore, we propose a global-tolocal hierarchical attention mechanism that effectively filters out geometrically inconsistent matches under rigid transformation, thereby improving the Inlier Ratio (IR) and Registration Recall (RR). Experimental results demonstrate that our method achieves state-of-the-art performance on the 7Scenes, RGBD Scenes V2, and a self-collected dataset, with consistent improvements across all benchmarks.

Semantic segmentation for uncrewed aerial vehicles (UAVs) is fundamental for aerial scene understanding, yet existing RGB and RGB-T datasets remain limited in scale, diversity, and annotation efficiency due to the high cost of manual labeling and the difficulties of accurate RGB-T alignment on off-the-shelf UAVs. To address these challenges, we propose a scalable geometry-driven 2D-3D-2D paradigm that leverages multi-view redundancy in high-overlap aerial imagery to automatically propagate labels from a small subset of manually annotated RGB images to both RGB and thermal modalities within a unified framework. By lifting less than 3% of RGB images into a semantic 3D point cloud and rendering it into all views, our approach enables dense pseudo ground-truth generation across large image collections, automatically producing 97% of RGB labels and 100% of thermal labels while achieving 91% and 88% annotation accuracy without any 2D manual refinement. We further extend this 2D-3D-2D paradigm to cross-modal image registration, using 3D geometry as an intermediate alignment space to obtain fully automatic, strong pixel-level RGB-T alignment with 87% registration accuracy and no hardware-level synchronization. Applying our framework to existing geo-referenced aerial imagery, we construct SegFly, a large-scale benchmark with over 20,000 high-resolution RGB images and more than 15,000 geometrically aligned RGB-T pairs spanning diverse urban, industrial, and rural environments across multiple altitudes and seasons. On SegFly, we establish the Firefly baseline for RGB and thermal semantic segmentation and show that both conventional architectures and vision foundation models benefit substantially from SegFly supervision, highlighting the potential of geometry-driven 2D-3D-2D pipelines for scalable multi-modal aerial scene understanding. Data and Code available at https://github.com/markus-42/SegFly.

In computer- and robot-assisted orthopedic surgery (CAOS), patient-specific surgical plans derived from preoperative imaging define target locations and implant trajectories. During surgery, these plans must be accurately transferred, relying on precise cross-registration between preoperative and intraoperative data. However, substantial modality heterogeneity across imaging modalities makes this registration challenging and error-prone. Robust, automatic, and modality-agnostic bone surface registration is therefore clinically important. We propose NeuralBoneReg, a self-supervised, surface-based framework that registers bone surfaces using 3D point clouds as a modality-agnostic representation. NeuralBoneReg includes two modules: an implicit neural unsigned distance field (UDF) that learns the preoperative bone model, and an MLP-based registration module that performs global initialization and local refinement by generating transformation hypotheses to align the intraoperative point cloud with the neural UDF. Unlike SOTA supervised methods, NeuralBoneReg operates in a self-supervised manner, without requiring inter-subject training data. We evaluated NeuralBoneReg against baseline methods on two publicly available multi-modal datasets: a CT-ultrasound dataset of the fibula and tibia (UltraBones100k) and a CT-RGB-D dataset of spinal vertebrae (SpineDepth). The evaluation also includes a newly introduced CT-ultrasound dataset of cadaveric subjects containing femur and pelvis (UltraBones-Hip), which will be made publicly available. NeuralBoneReg matches or surpasses existing methods across all datasets, achieving mean RRE/RTE of 1.83°/2.02 mm on UltraBones100k, 1.90°/1.56 mm on UltraBones-Hip, and 3.78°/2.80 mm on SpineDepth. These results demonstrate strong generalizability across anatomies and modalities, providing robust and accurate cross-modal alignment for CAOS.