Overview

Lithium-ion battery research spans electrode and electrolyte design, cell operation, degradation, safety, manufacturing, and recycling. Researchers use electrochemical models such as the single-particle model, experiments and materials characterization, and machine-learning methods including sequence networks and physics-informed neural networks. These approaches estimate state of charge and health, forecast remaining life, detect faults and thermal runaway, and speed up materials and design screening, often using cycling datasets and drive-cycle measurements. A central challenge is making predictions that transfer from controlled laboratory tests to different cells, chemistries, and real-world use while remaining physically reliable and computationally efficient.

Latest papers

52 papers4 papers in the last four weeks, against 1 the four weeks before. 0.0% of all new papers.

Jun 6, 2026

Vision-Guided Dual-Arm Humanoid Robotic Disassembly of End-of-Life 18650 Lithium-ion Battery Packs

The growing volume of retired lithium-ion battery packs from electric vehicles and portable electronics calls for automated disassembly that is safe, flexible, and selective down to the individual cell. Existing robotic systems, however, mostly assume known pack poses, external fixtures, or specialised tooling, leaving fixture-free cell-level disassembly under pose uncertainty largely unsolved. This paper presents a vision-guided dual-arm pipeline that disassembles a 21-cell 18650 pack from an arbitrary initial pose using only general-purpose parallel-jaw grippers, RGB-D sensing, and a pre-trained grasp detector. Pose uncertainty is absorbed by a learn-and-filter perception stack with discrete look-and-move wrist-camera corrections, while a mid-task support transfer between the two arms extends the effective workspace without any external clamp. The pipeline achieves an 8/10 end-to-end success rate, a cell-localisation root-mean-square error of 2.42.4,mm, and a mean cycle time of 6.0,minutes per pack, providing a practical, fixture-free building block for industrial battery recycling.
May 29, 2026

AI-Guided Design and Optimization of Graphite-Based Anodes via Iterative Experimental Feedback

This study presents an iterative AI-guided workflow that accelerates graphite-based anode development by improving both formulation feasibility and process robustness. Sequential learning via AI/ML-guided multiobjective inverse design for anode optimization was implemented using the Citrine Platform. Starting from a noisy, incomplete dataset, the Citrine Platform was used to generate early surrogate models, which despite low predictive certainty highlighted missing process constraints. By iteratively adding feasibility labels and boundary condition failures, the workflow rapidly converged toward manufacturable, higher-performing formulations. Fabrication reliability improved from frequent process failures to 100% successful cell production, while the fraction of cells delivering ≥\geq 350 mAh g−1^{-1} increased from 28.4% to 84.8%, with capacity retention rising from 42.1% to 97.3%. These results demonstrate that structured, feedback-driven AI workflows can transform imperfect industrial data into actionable guidance, enabling faster, more reproducible optimization of battery electrode manufacturing.
May 17, 2026

MagBridge-Battery: A Synthetic Bridge Dataset for Li-ion Magnetometry and State-of-Health Diagnostics

Battery health diagnostics today rely overwhelmingly on electrochemical signals measured at the cell terminals. A parallel literature has shown that magnetic sensing can resolve information that terminal-only measurements miss, but method development is limited by the absence, to the best of our knowledge, of public battery magnetic-measurement datasets paired with degradation labels. We release MagBridge-Battery v1.0, a synthetic dataset of 6,760 magnetic-field signatures that bridges real magnetic morphology from the Mohammadi-Jerschow Open Science Framework (OSF) archive with state-of-health (SOH) labels from the PulseBat dataset. The release contains 5,600 PulseBat-conditioned grounded samples, 600 synthetic sensor-anomaly samples derived from clean parents, and 560 low-voltage Regime-B extrapolation samples. A cell-disjoint, parent-child-leakage-free primary benchmark split is verified to contain zero overlapping cells, zero cross-split parent-child pairs, and zero sample-ID overlap. We define three primary benchmark tasks: SOH regression, second-life classification, and anomaly detection, plus an auxiliary anomaly-subtype classification task. A controlled label-shuffle ablation collapses SOH regression from R^2 approximately 0.77 to approximately 0, confirming that the bridge encodes input SOH non-trivially rather than producing label-aligned artifacts. The dataset is released on Zenodo under CC-BY-4.0, and the bridge code and benchmark suite are released under Apache-2.0. This work provides a public benchmark for magnetic-sensing battery diagnostics while paired magnetic-electrochemical measurements remain scarce.
May 17, 2026

Causal Anomaly Detection for Lithium-Ion Battery Degradation

Reliable early detection of lithium-ion battery degradation requires health indicators that are physically interpretable and computable from routine cycler telemetry without access to the degradation region. We introduce CausalHealth, a framework that applies causal graph discovery and kk-nearest-neighbour transfer entropy to per-cycle voltage, current, temperature, and resistance time series, and organises twelve resulting anomaly scores into three signal-class bundles (Magnitude-shift, Predictive-residual, Complexity-entropy) -- with Isolation Forest reported separately as it falls below the bundle reliability threshold -- to characterise detection sensitivity across ten commissioning fractions (5--30,%). The Magnitude-shift class achieves 100,% detection across all seven tested cells spanning LFP (MIT--Stanford MATR) and LCO (NASA PCoE, CALCE CS2) chemistries, with a lead time of up to 402 cycles before conventional capacity-threshold failure on gradual-fade cells. A Reliability-Weighted Master Health Index (RWMHI) -- a cross-bundle fusion of five high-reliability detectors weighted by inverse coefficient of variation -- improves lead time by 15--52 cycles over the class median on long-lived cells while maintaining 100,% detection. Validation against electrochemical impedance spectroscopy on an NMC prismatic cell provides independent physical grounding: transfer entropy TE(R ⁣→ ⁣V)\mathrm{TE}(R \!\to\! V) correlates with charge-transfer resistance RctR_{\mathrm{ct}} (pooled r=+0.990r = +0.990; temperature-controlled partial r=+0.898r = +0.898), and an Arrhenius analysis of both quantities yields an activation energy consistent with published NMC charge-transfer kinetics. These results are evaluated on seven cells across three benchmark datasets.
May 9, 2026

C2L-Net: A Data-Driven Model for State-of-Charge Estimation of Lithium-Ion Batteries During Discharge

Accurate state-of-charge (SOC) estimation is critical for the safe and efficient operation of lithium-ion batteries in battery management systems (BMS). Although data-driven approaches can effectively capture nonlinear battery dynamics, many existing methods rely on long historical input sequences, resulting in high computational cost and introducing padding-induced positional bias at the beginning of drive cycles. To address these limitations, we propose C2L-Net, a novel context-to-latest data-driven framework for realistic online SOC estimation using only a short historical window (20 s). Unlike existing short-receptive-field or long-history models, the proposed framework explicitly separates contextual encoding from latest-measurement updating, enabling both efficient temporal modeling and rapid adaptation to dynamic battery states. The proposed model incorporates a chunk-based feature extraction mechanism that combines Theta Attention Pooling with a Fourier-based Seasonality Basis to capture local temporal patterns while reducing sequence length. A causal context encoder, integrating a gated recurrent unit (GRU) with Causal Cosine Attention, models temporal dependencies without information leakage. Furthermore, a latest-measurement decoder, inspired by recursive filtering, updates the contextual state using the most recent measurement, enhancing responsiveness to dynamic operating conditions. Extensive experiments on a public lithium-ion battery drive-cycle dataset under multiple fixed-temperature conditions demonstrate that the proposed method achieves state-of-the-art or competitive accuracy while significantly improving computational efficiency. In particular, C2L-Net achieves up to 60 times faster inference and requires fewer parameters than recent data-driven baselines, while maintaining robust performance across unseen driving profiles.
Apr 22, 2026

Physics-Enhanced Deep Learning for Proactive Thermal Runaway Forecasting in Li-Ion Batteries

Accurate prediction of thermal runaway in lithium-ion batteries is essential for ensuring the safety, efficiency, and reliability of modern energy storage systems. Conventional data-driven approaches, such as Long Short-Term Memory (LSTM) networks, can capture complex temporal dependencies but often violate thermodynamic principles, resulting in physically inconsistent predictions. Conversely, physics-based thermal models provide interpretability but are computationally expensive and difficult to parameterize for real-time applications. To bridge this gap, this study proposes a Physics-Informed Long Short-Term Memory (PI-LSTM) framework that integrates governing heat transfer equations directly into the deep learning architecture through a physics-based regularization term in the loss function. The model leverages multi-feature input sequences, including state of charge, voltage, current, mechanical stress, and surface temperature, to forecast battery temperature evolution while enforcing thermal diffusion constraints. Extensive experiments conducted on thirteen lithium-ion battery datasets demonstrate that the proposed PI-LSTM achieves an 81.9% reduction in root mean square error (RMSE) and an 81.3% reduction in mean absolute error (MAE) compared to the standard LSTM baseline, while also outperforming CNN-LSTM and multilayer perceptron (MLP) models by wide margins. The inclusion of physical constraints enhances the model's generalization across diverse operating conditions and eliminates non-physical temperature oscillations. These results confirm that physics-informed deep learning offers a viable pathway toward interpretable, accurate, and real-time thermal management in next-generation battery systems.
Apr 17, 2026

Continuous ageing trajectory representations for knee-aware lifetime prediction of lithium-ion batteries across heterogeneous dataset

Accurate assessment of lithium-ion battery ageing is challenged by cell-to-cell variability, heterogeneous cycling protocols, and limited transferability of data-driven models across datasets. In particular, robust identification of degradation transitions, such as the knee point, and reliable early-life prediction of remaining useful life (RUL) remain open problems. This study proposes a unified framework for battery ageing analysis based on continuous representations of voltage-capacity and capacity-cycle trajectories learned from heterogeneous public datasets (NASA, CALCE, ISU-ILCC). The continuous formulation enables consistent extraction of degradation descriptors, including curvature, plateau length and knee-related metrics, while reducing sensitivity to dataset-specific discretisation. Across more than 250 cells, statistically significant correlations between knee onset and end-of-life (Pearson 0.75-0.84) are observed. Additional early-life analysis confirms that knee-related features retain predictive value when estimated from partial trajectories. Early-life models provide increasingly stable RUL predictions as the number of observed cycles increases, with meaningful predictive performance emerging within the first 5-20 cycles and remain robust under cross-dataset domain shift. The framework integrates continuous modelling, feature extraction and uncertainty-aware prediction, providing an interpretable and dataset-consistent approach demonstrating robustness across heterogeneous dataset types. Compared with conventional discrete or feature-based methods, the proposed representation reduces sensitivity to sampling resolution and improves cross-dataset consistency. The study is limited to laboratory-scale datasets and capacity-based end-of-life definitions.
Apr 11, 2026

Battery health prognosis using Physics-informed neural network with Quantum Feature mapping

Accurate battery health prognosis using State of Health (SOH) estimation is essential for the reliability of multi-scale battery energy storage, yet existing methods are limited in generalizability across diverse battery chemistries and operating conditions. The inability of standard neural networks to capture the complex, high-dimensional physics of battery degradation is a major contributor to these limitations. To address this, a physics-informed neural network with the Quantum Feature Mapping(QFM) technique (QPINN) is proposed. QPINN projects raw battery sensor data into a high-dimensional Hilbert space, creating a highly expressive feature set that effectively captures subtle, non-linear degradation patterns using Nyström method. These quantum-enhanced features are then processed by a physics-informed network that enforces physical constraints. The proposed method achieves an average SOH estimation accuracy of 99.46% across different datasets, substantially outperforming state-of-the-art baselines, with reductions in MAPE and RMSE of up to 65% and 62%, respectively. This method was validated on a large-scale, multi-chemistry dataset of 310,705 samples from 387 cells, and further showed notable adaptability in cross-validation settings, successfully transferring from one chemistry to another without relying on target-domain SOH labels.
Apr 2, 2026

AQVolt26: High-Temperature r2^2SCAN Halide Dataset for Universal ML Potentials and Solid-State Batteries

The demand for safe, high-energy-density batteries has spotlighted halide solid-state electrolytes, which offer the potential for enhanced ionic mobility, electrochemical stability, and interfacial deformability. Accelerating their discovery requires extensive molecular dynamics, which has been increasingly enabled by universal machine learning interatomic potentials trained on foundational datasets. However, the dynamic softness of halides poses a stringent test of whether general-purpose models can reliably replace first-principles calculations under the highly distorted, elevated-temperature regimes necessary to probe ion transport. Here, we present AQVolt26, a dataset of 322,656 r2^2SCAN single-point calculations for lithium halides, generated via high-temperature configurational sampling across ∼\sim5K structures. We demonstrate that foundational datasets provide a strong baseline for stable halide chemistries and transfer local forces well, however absolute energy predictions degrade in distorted higher-temperature regimes. Co-training with AQVolt26 resolves this blind spot. Furthermore, incorporating Materials Project relaxation data improves near-equilibrium performance but degrades extreme-strain robustness without enhancing high-temperature force accuracy. These results demonstrate that domain-specific configurational sampling is essential for the reliable dynamic screening of halide electrolytes. Furthermore, our findings suggest that while foundational models provide a robust base, they are most effective for dynamically soft solid-state chemistries when augmented with targeted, high-temperature data. Finally, we show that near-equilibrium relaxation data serves as a task-specific complement rather than a universally beneficial addition.
Apr 2, 2026

Neural posterior estimation for scalable and accurate inverse parameter inference in Li-ion batteries

Diagnosing the internal state of Li-ion batteries is critical for battery research, operation of real-world systems, and prognostic evaluation of remaining lifetime. By using physics-based models to perform probabilistic parameter estimation via Bayesian calibration, diagnostics can account for the uncertainty due to model fitness, data noise, and the observability of any given parameter. However, Bayesian calibration in Li-ion batteries using electrochemical data is computationally intensive even when using a fast surrogate in place of physics-based models, requiring many thousands of model evaluations. A fully amortized alternative is neural posterior estimation (NPE). NPE shifts the computational burden from the parameter estimation step to data generation and model training, reducing the parameter estimation time from minutes to milliseconds, enabling real-time applications. The present work shows that NPE calibrates parameters equally or more accurately than Bayesian calibration, and we demonstrate that the higher computational costs for data generation are tractable even in high-dimensional cases (ranging from 6 to 27 estimated parameters), but the NPE method can lead to higher voltage prediction errors. The NPE method also offers several interpretability advantages over Bayesian calibration, such as local parameter sensitivity to specific regions of the voltage curve. The NPE method is demonstrated using an experimental fast charge dataset, with parameter estimates validated against measurements of loss of lithium inventory and loss of active material. The implementation is made available in a companion repository (https://github.com/NatLabRockies/BatFIT).
Mar 28, 2026

Hybrid Deep Learning with Temporal Data Augmentation for Accurate Remaining Useful Life Prediction of Lithium-Ion Batteries

Accurate prediction of lithium-ion battery remaining useful life (RUL) is essential for reliable health monitoring and data-driven analysis of battery degradation. However, the robustness and generalization capabilities of existing RUL prediction models are significantly challenged by complex operating conditions and limited data availability. To address these limitations, this study proposes a hybrid deep learning model, CDFormer, which integrates convolutional neural networks, deep residual shrinkage networks, and Transformer encoders extract multiscale temporal features from battery measurement signals, including voltage, current, and capacity. This architecture enables the joint modeling of local and global degradation dynamics, effectively improving the accuracy of RUL prediction.To enhance predictive reliability, a composite temporal data augmentation strategy is proposed, incorporating Gaussian noise, time warping, and time resampling, explicitly accounting for measurement noise and variability. CDFormer is evaluated on two real-world datasets, with experimental results demonstrating its consistent superiority over conventional recurrent neural network-based and Transformer-based baselines across key metrics. By improving the reliability and predictive performance of RUL prediction from measurement data, CDFormer provides accurate and reliable forecasts, supporting effective battery health monitoring and data-driven maintenance strategies.
Mar 25, 2026

Conformalized Transfer Learning for Li-ion Battery State of Health Forecasting under Manufacturing and Usage Variability

Accurate forecasting of state-of-health (SOH) is essential for ensuring safe and reliable operation of lithium-ion cells. However, existing models calibrated on laboratory tests at specific conditions often fail to generalize to new cells that differ due to small manufacturing variations or operate under different conditions. To address this challenge, an uncertainty-aware transfer learning framework is proposed, combining a Long Short-Term Memory (LSTM) model with domain adaptation via Maximum Mean Discrepancy (MMD) and uncertainty quantification through Conformal Prediction (CP). The LSTM model is trained on a virtual battery dataset designed to capture real-world variability in electrode manufacturing and operating conditions. MMD aligns latent feature distributions between simulated and target domains to mitigate domain shift, while CP provides calibrated, distribution-free prediction intervals. This framework improves both the generalization and trustworthiness of SOH forecasts across heterogeneous cells.
Mar 24, 2026

SynForceNet: A Force-Driven Global-Local Latent Representation Framework for Lithium-Ion Battery Fault Diagnosis

Online safety fault diagnosis is essential for lithium-ion batteries in electric vehicles(EVs), particularly under complex and rare safety-critical conditions in real-world operation. In this work, we develop an online battery fault diagnosis network based on a deep anomaly detection framework combining kernel one-class classification and minimum-volume estimation. Mechanical constraints and spike-timing-dependent plasticity(STDP)-based dynamic representations are introduced to improve complex fault characterization and enable a more compact normal-state boundary. The proposed method is validated using 8.6 million valid data points collected from 20 EVs. Compared with several advanced baseline methods, it achieves average improvements of 7.59% in TPR, 27.92% in PPV, 18.28% in F1 score, and 23.68% in AUC. In addition, we analyze the spatial separation of fault representations before and after modeling, and further enhance framework robustness by learning the manifold structure in the latent space. The results also suggest the possible presence of shared causal structures across different fault types, highlighting the promise of integrating deep learning with physical constraints and neural dynamics for battery safety diagnosis.
Mar 21, 2026

Interpretable Battery Aging without Extra Tests via Neural-Assisted Physics-based Modelling

State of health (SoH) is widely used for battery management, but it is a single scalar and offers limited interpretability. Two batteries with similar SoH can exhibit very different degradation behaviors and the lack of interpretability hinders optimal battery operation. In this paper, we propose IBAM for interpretable battery aging modelling with a neural-assisted physics-based framework. IBAM outputs a 2-D aging fingerprint without extra diagnostic tests and uses only routine logs from the battery management system. The fingerprint offers great interpretability by capturing a battery's curve-wide polarization voltage loss and the tail loss near the end-of-discharge. IBAM first creates a physics-based battery model based on a fractional-order equivalent circuit model, and then extracts per-cycle fingerprints from the model using a two-stage least-squares method. IBAM further anchors fingerprints on the SoH axis with physics-guided regression, where the per-cycle SoH is estimated via a bidirectional gated recurrent unit with customized multi-channel voltage features. Across batteries with short-, medium-, and long-lifespans, IBAM consistently yields the best physics model fidelity at different aging stages, and provides clear interpretations of degradation mechanisms and fingerprint patterns about batteries of different lifespans. The resulting fingerprints support interpretable battery health assessment and can inform battery control choices.
Mar 20, 2026

A Multi-Task Targeted Learning Framework for Lithium-Ion Battery State-of-Health and Remaining Useful Life

Accurately predicting the state-of-health (SOH) and remaining useful life (RUL) of lithium-ion batteries is crucial for ensuring the safe and efficient operation of electric vehicles while minimizing associated risks. However, current deep learning methods are limited in their ability to selectively extract features and model time dependencies for these two parameters. Moreover, most existing methods rely on traditional recurrent neural networks, which have inherent shortcomings in long-term time-series modeling. To address these issues, this paper proposes a multi-task targeted learning framework for SOH and RUL prediction, which integrates multiple neural networks, including a multi-scale feature extraction module, an improved extended LSTM, and a dual-stream attention module. First, a feature extraction module with multi-scale CNNs is designed to capture detailed local battery decline patterns. Secondly, an improved extended LSTM network is employed to enhance the model's ability to retain long-term temporal information, thus improving temporal relationship modeling. Building on this, the dual-stream attention module-comprising polarized attention and sparse attention to selectively focus on key information relevant to SOH and RUL, respectively, by assigning higher weights to important features. Finally, a many-to-two mapping is achieved through the dual-task layer. To optimize the model's performance and reduce the need for manual hyperparameter tuning, the Hyperopt optimization algorithm is used. Extensive comparative experiments on battery aging datasets demonstrate that the proposed method reduces the average RMSE for SOH and RUL predictions by 111.3% and 33.0%, respectively, compared to traditional and state-of-the-art methods.
Mar 17, 2026

A scalable neural bundle map for multiphysics prediction in lithium-ion battery across varying configurations

Efficient and accurate prediction of Multiphysics evolution across diverse cell geometries is fundamental to the design, management and safety of lithium-ion batteries. However, existing computational frameworks struggle to capture the coupled electrochemical, thermal, and mechanical dynamics across diverse cell geometries and varying operating conditions. Here, we present a Neural Bundle Map (NBM), a mathematically rigorous framework that reformulates multiphysics evolution as a bundle map over a geometric base manifold. This approach enables the complete decoupling of geometric complexity from underlying physical laws, ensuring strong operator continuity across varying domains. Our framework achieves high-fidelity spatiotemporal predictions with a normalized mean absolute error of less than 1% across varying configurations, while maintaining stability during long-horizon forecasting far beyond the training window and reducing computational costs by two orders of magnitude compared with conventional solvers. Leveraging this capability, we rapidly explored a vast configurational space to identify an optimal battery design that yields a 38% increase in energy density while adhering to thermal safety constraints. Furthermore, the NBM demonstrates remarkable scalability to multi-cell systems through few-shot transfer learning, providing a foundational paradigm for the intelligent design and real-time monitoring of complex energy storage infrastructures.
Mar 13, 2026

Motion-Specific Battery Health Assessment for Quadrotors Using High-Fidelity Battery Models

Quadrotor endurance is ultimately limited by battery behavior, yet most energy aware planning treats the battery as a simple energy reservoir and overlooks how flight motions induce dynamic current loads that accelerate battery degradation. This work presents an end to end framework for motion aware battery health assessment in quadrotors. We first design a wide range current sensing module to capture motion specific current profiles during real flights, preserving transient features. In parallel, a high fidelity battery model is calibrated using reference performance tests and a metaheuristic based on a degradation coupled electrochemical model.By simulating measured flight loads in the calibrated model, we systematically resolve how different flight motions translate into degradation modes loss of lithium inventory and loss of active material as well as internal side reactions. The results demonstrate that even when two flight profiles consume the same average energy, their transient load structures can drive different degradation pathways, emphasizing the need for motion-aware battery management that balances efficiency with battery degradation.
Mar 11, 2026

World Model for Battery Degradation Prediction Under Non-Stationary Aging

Degradation prognosis for lithium-ion cells requires forecasting the state-of-health (SOH) trajectory over future cycles. Existing data-driven approaches can produce trajectory outputs through direct regression, but lack a mechanism to propagate degradation dynamics forward in time. This paper formulates battery degradation prognosis as a world model problem, encoding raw voltage, current, and temperature time-series from each cycle into a latent state and propagating it forward via a learned dynamics transition to produce a future trajectory spanning 80 cycles. To investigate whether electrochemical knowledge improves the learned dynamics, a Single Particle Model (SPM) constraint is incorporated into the training loss. Three configurations are evaluated on the Severson LiFePO4 (LFP) dataset of 138 cells. Iterative rollout halves the trajectory forecast error compared to direct regression from the same encoder. The SPM constraint improves prediction at the degradation knee where the resistance to SOH relationship is most applicable, without changing aggregate accuracy.
Mar 10, 2026

Probabilistic Hysteresis Factor Prediction for Electric Vehicle Batteries with Graphite Anodes Containing Silicon

Batteries with silicon-graphite-based anodes, which offer higher energy density and improved charging performance, introduce pronounced voltage hysteresis, making state-of-charge (SoC) estimation particularly challenging. Existing approaches to modeling hysteresis rely on exhaustive high-fidelity tests or focus on conventional graphite-based lithium-ion batteries, without considering uncertainty quantification or computational constraints. This work introduces a data-driven approach for probabilistic hysteresis factor prediction, with a particular emphasis on applications involving silicon-graphite anode-based batteries. A data harmonization framework is proposed to standardize heterogeneous driving cycles across varying operating conditions. Statistical learning and deep learning models are applied to assess performance in predicting the hysteresis factor with uncertainties while considering computational efficiency. Extensive experiments are conducted to evaluate the generalizability of the optimal model configuration in unseen vehicle models through retraining, zero-shot prediction, fine-tuning, and joint training. By addressing key challenges in SoC estimation, this research facilitates the adoption of advanced battery technologies. A summary page is available at: https://runyao-yu.github.io/Porsche_Hysteresis_Factor_Prediction/
Feb 20, 2026

From Static Spectra to Operando Infrared Dynamics: Physics Informed Flow Modeling and a Benchmark

The Solid Electrolyte Interphase (SEI) is critical to the performance of lithium-ion batteries, yet its analysis via Operando Infrared (IR) spectroscopy remains experimentally complex and expensive, which limits its accessibility for standard research facilities. To overcome this bottleneck, we formulate a novel task, Operando IR Prediction, which aims to forecast the time-resolved evolution of spectral ``fingerprints'' from a single static spectrum. To facilitate this, we introduce OpIRSpec-7K, the first large-scale operando dataset comprising 7,118 high-quality samples across 10 distinct battery systems, alongside OpIRBench, a comprehensive evaluation benchmark with carefully designed protocols. Addressing the limitations of standard spectrum, video, and sequence models in capturing voltage-driven chemical dynamics and complex composition, we propose Aligned Bi-stream Chemical Constraint (ABCC), an end-to-end physics-aware framework. It reformulates MeanFlow and introduces a novel Chemical Flow to explicitly model reaction trajectories, employs a two-stream disentanglement mechanism for solvent-SEI separation, and enforces physics and spectrum constraints such as mass conservation and peak shifts. ABCC significantly outperforms state-of-the-art static, sequential, and generative baselines. ABCC even generalizes to unseen systems and enables interpretable downstream recovery of SEI formation pathways, supporting AI-driven electrochemical discovery.
Feb 20, 2026

PINEAPPLE: Physics-Informed Neuro-Evolution Algorithm for Prognostic Parameter Inference in Lithium-Ion Battery Electrodes

Accurate, real-time, yet non-destructive estimation of internal states in lithium-ion batteries is critical for predicting degradation, optimizing usage strategies, and extending operational lifespan. Here, we introduce PINEAPPLE (Physics-Informed Neuro-Evolution Algorithm for Prognostic Parameter inference in Lithium-ion battery Electrodes), a novel framework that integrates physics-informed neural networks (PINNs) with an evolutionary search algorithm to enable rapid, scalable, and interpretable parameter inference with potential for application to next-generation batteries. The meta-learned PINN utilizes fundamental physics principles to achieve accurate zero-shot prediction of electrode behavior with test errors below 0.1%\% while maintaining an order-of-magnitude speed-up over conventional solvers. PINEAPPLE demonstrates robust parameter inference solely from voltage-time discharge curves across multiple batteries from the open-source CALCE repository, recovering the evolution of key internal state parameters such as Li-ion diffusion coefficients across usage cycles. Notably, the inferred cycle-dependent evolution of these parameters exhibit consistent trends across different batteries without any customized degradation physics-embedded heuristic, highlighting the effective regularizing effect and robustness that can be conferred through incorporation of fundamental physics in PINEAPPLE. By enabling computationally efficient, real-time parameter estimation, PINEAPPLE offers a promising route towards the non-destructive, physics-based characterization of inter-cell and intra-cell variability of battery modules and battery packs, thereby unlocking new opportunities for downstream on-the-fly needs in next-generation battery management systems such as individual cell-scale state-of-health diagnostics.
Oct 31, 2025

From the Rock Floor to the Cloud: A Systematic Survey of State-of-the-Art NLP in Battery Life Cycle

This work presents a systematic review of the application of natural language processing (NLP) along the entire battery life cycle, instead of the review of one stage or method, and introduces a novel conceptual technical language processing (TLP) framework for the European Union (EU)'s proposed digital battery passport (DBP) and other general battery predictions, as the main objective. It follows the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) method and employs three reputable databases or search engines, including Google Scholar, Institute of Electrical and Electronics Engineers Xplore (IEEE Xplore), and Scopus, searched in October, 2025. The search criteria are 'text', 'language processing', and 'battery' while the exclusion criteria are non-relevant papers and those published before 2017, which was applied to all databases, except IEEE Xplore because it turned up fewer results. Consequently, it assesses 274 scientific papers before the critical review of the final 66 relevant papers. We publicly provide artifacts of the review for validation and possible reproducibility. The findings show that new NLP tasks are emerging in the battery domain, which facilitate materials discovery and other stages of the life cycle. Notwithstanding, challenges remain, such as the lack of standard benchmarks. The proposed TLP framework, which incorporates agentic AI and optimized prompts, may be apt for tackling some of the challenges.