Synthetic Anomaly Generation

Follow this topic Ask about this topic

Momentum

4 papers in the last four weeks, against 1 the four weeks before. 0.0% of all new papers.

Jul 13Week of Sep 28

Latest papers 34

Sep 29, 2026cs.CV

Visual Anomaly Synthesis for Model Selection in Data Scarcity

Defect detection systems for industrial condition monitoring can only be relied upon if they are validated, yet defective samples are rare and, for a specific asset, often nonexistent. We present a framework that synthesizes severity-graded defects on real non-defective images without any defect references for the target asset, that can be used for model selection and validation. A defect taxonomy for common failure modes is distilled from literature into prescriptive prompts at varying defect severities. Regions of interest are cropped from in defect-free images and edited with a pre-trained image generation model ("FLUX.2 [klein]"). Color-matching and blending are employed to improve structural coherence with the original image. Generations are filtered out by a scorer and by estimated detection difficulty. Model selection experiments on MVTecAD show image AUROC choice regret over model selection can be nearly halved compared to the best fixed model chosen with access to test data. Experiments show the need for severity-graded anomaly synthesis. A case study investigates the proposed method for in-situ monitoring of Pelton turbine runners in hydropower, where real defect images are rare and expensive to collect. A PatchCorebased anomaly detection model is fit on Pelton turbine images and selected and validated using synthetic images, showing strong detection performance (94 % correct detection at optimal threshold and AUROC 0.97). The model reliably detects moderate and advanced defects, while early-stage defects remain challenging, indicating the synthetic data meaningfully stresses detector sensitivity.

Daniel Pröll, Thomas Kraxner, Tobias Schaefer +1

Digital Factory Vorarlberg GmbH, Dornbirn, Austria · University of Salzburg, Salzburg, Austria · illwerke vkw AG, Bregenz, Austria +1

Industrial Anomaly Detection Synthetic Anomaly Generation Anomaly Detection

Sep 29, 2026cs.CV

FLASH: A "Generate Once, Synthesize Many" Framework for Synthetic Anomaly Generation in Industrial Anomaly Detection

Synthetic anomaly generation helps expand industrial anomaly datasets when real defects are scarce or unavailable. Existing approaches lie at two extremes: procedural approaches are fast but struggle to represent complex anomalies, while generative approaches produce diverse defects but require costly per-sample generation. We present FLASH, a framework that decouples defect generation from anomaly synthesis under a ``generate once, synthesize many'' paradigm. Given only normal images, FLASH uses Vision-Language Model (VLM) guidance and an image-generation model to produce a small set of defect images, from which it extracts, validates, and banks reusable defect patches. For synthesis of anomalous images, Object Boundary Suppression (OBS) first identifies the probable foreground object-aware region of the host image, while Multi-Resolution Spectral Pyramid (MRSP) noise generates diverse, size-controllable masks that determine the defect location and spatial extent. It then composes a large and diverse synthetic anomalous image set by localizing the defect region, sampling size-controllable placement masks and seamlessly blending retrieved defects onto new defect-free images without further need for image generation. Experiments on the MVTec AD 2 dataset show that FLASH-generated anomalies nearly close the calibration gap on real defects, reaching 78.1% image-level F1 against an 83.6% real-anomaly upper bound and providing the most consistent calibration transfer across detectors among procedural and generative alternatives. Moreover, FLASH synthesizes anomalies more than 11.95x faster than per-sample generative approaches.

Abhay Kumar Das, Rajesh Gangireddy, Ashwin Vaidya +1

Silicon University, Bhubaneswar, India · Intel

Synthetic Data Augmentation Industrial Anomaly Detection Synthetic Anomaly Generation

Sep 28, 2026cs.LG

Physics-Guided Conditional Diffusion Model for Rare Event Synthesis and Diagnosis for the Water-Gas Shift Reaction

As the world moves towards sustainable energy sources, hydrogen (H2) can be treated as an eco-friendly alternative to fossil fuels due to its high energy density and zero carbon emissions. The water-gas shift (WGS) reaction is a widely used industrial process for hydrogen production by converting carbon monoxide and steam into hydrogen and carbon dioxide. However, occurrences like severe fouling, catalyst deterioration, and thermal runaway can hamper the reaction kinetics/process safety and decrease the yield of H2. These incidents are rare, and gathering process data under such abnormal conditions is challenging. In this work, we propose a physics-guided conditional diffusion model to generate realistic rare-event trajectories for the WGS reaction. The proposed model integrates a conditional denoising diffusion probabilistic model (CDDPM) with governing laws of the reaction to generate physically consistent process trajectories. The conditioning features allow the model to produce high-quality synthetic profiles for rare-event domains that are typically beyond the training regimes. The generated rare-event trajectories then augment the raw dataset for a balanced distribution between normal and abnormal conditions. We further propose a hazard score to assess the risk severity of the operating condition based on the operating trajectory. Deep learning models are trained with the augmented dataset to diagnose the health status of the reaction. Simulation results show that the proposed physics-guided diffusion model outperforms data-driven models in terms of the quality of synthetic data and diagnosis performance for rare events.

Md Abrar Rafid Siddique, Bibek Aryal, Qiugang Lu

Department of Chemical Engineering, Texas Tech University, Lubbock, TX 79409, USA

Physics-Informed Generative Modeling Synthetic Anomaly Generation Conditional Diffusion Models Fault Diagnosis

Sep 14, 2026cs.LG

Score-based Outlier Generation via Controlling the Radon-Nikodym Derivative

Outliers are important for stress-testing algorithms and understanding system behaviour under rare conditions. Despite being commonly described as low-likelihood events, existing generative approaches rarely control likelihood explicitly. In this work, we introduce a measure-theoretic notion of outliers based on the distribution of log-likelihood values, which is guaranteed to assign higher probability mass to low-likelihood events with a specifiable magnitude. Building on this formulation, we derive how likelihood reweighting modifies the diffusion score and use this relation to motivate a controlled modification of the reverse-time dynamics. In particular, likelihood reweighting implies a scaling of the score function with a control term derived from the Radon-Nikodym derivative of the likelihood distributions. Correspondingly, the updated score function can be obtained with no retraining of the diffusion model. We exploit the Ornstein-Uhlenbeck semigroup underlying diffusion models to motivate an exponentially interpolated controller which approximates the true control. Experiments demonstrate controlled generation of low-likelihood samples while remaining consistent with the data geometry.

Amartya Mukherjee, Tristan Milne, Kry Yik-Chau Lui +2

Department of Applied Mathematics, University of Waterloo, Waterloo, Ontario, Canada N2L 3G1 · Royal Bank of Canada, 1 Place Ville Marie, Montreal, Quebec, H3C 3A9

Diffusion Sampling Synthetic Anomaly Generation Score-Based Generative Modeling

Sep 2, 2026cs.CV

DPA: Decoupling Product-Agnostic Anomaly Representations for Zero-shot Anomaly Generation

Industrial anomaly detection benefits from anomaly samples, yet newly deployed products typically provide only normal images, making anomaly samples difficult to collect. Zero-shot anomaly generation offers a promising solution which avoids collection of target-product anomalies. However, existing methods mainly rely on texture images or text descriptions as anomaly sources, which often produce unrealistic anomalies. Observing that similar anomalies can recur across different products, we propose anomaly transfer-based zero-shot generation, which reuses real anomalies from existing source products, making target-product anomalies no longer necessary to generate realistic anomalious samples for unseen target products. Since not every anomaly type suits the target product, an anomaly type filtering mechanism first selects plausible source types. To transfer selected anomaly, we propose DPA, a diffusion-based framework that decouples product-agnostic anomaly representations. Instead of directly extracting anomaly representations, DPA learns product-irrelevant anomaly embeddings through training with the mismatched data pair, enabling transferable anomaly concept learning across products. Furthermore, we design an adaptive mask-guided pipeline that leverages adaptive masks to control the positional and geometric plausibility of generated anomalies during generation. A training-free anomaly labeling module is further introduced to produce pixel-level annotations aligned with generated anomalies. Extensive experiments on MVTec-AD, VisA, and a dedicated anomaly-transfer benchmark demonstrate that the proposed setting and DPA generate more realistic anomalies and significantly improve downstream anomaly detection performance under both zero-shot and few-shot settings. Source code and models will be released.

Hang Yao, Yansheng Fu, Ming Liu +4

Industrial Anomaly Detection Diffusion-Based Image Generation Synthetic Anomaly Generation

Aug 8, 2026cs.CV

DeCo: Zero-Shot Industrial Anomaly Generation through Decoupling and Recoupling

Industrial anomaly inspection is severely hindered by the scarcity of real anomalous data. Zero-shot industrial anomaly generation addresses this by generating anomalies on specific products without requiring any of their real anomalous images. However, existing methods suffer from two critical limitations, i.e., inaccurate anomaly information acquisition and uncontrolled anomaly-product fusion. To overcome these challenges, we propose DeCo, which decouples the anomaly structure from its source product, and explicitly recouples it with the normal textures of the target product. During anomaly information acquisition, Dual-Routing Flow (DR-Flow) binds the texture-invariant anomaly structure to an abnormal token, while a parallel constraint, Product-Invariant Flow (PI-Flow), prevents the abnormal token from binding the source product. During anomaly-product fusion, we propose a hybrid injection to recouple the acquired anomaly structure with the target product, and Product Compatibility Correction (PCC) to compensate for the incompatibility between the acquired anomaly structure and the product. Extensive experiments demonstrate that DeCo establishes a new state-of-the-art. Training downstream detection models on our generated data yields massive pixel AP improvements of 5.1% on MVTec AD and 8.2% on VisA. Code is available at https://github.com/HUST-SLOW/DeCo.

Shilei Zeng, Xurui Li, Yaohan Tang +1

School of Electronic Information and Communications, Huazhong University of Science and Technology

Industrial Anomaly Detection Synthetic Anomaly Generation

Aug 8, 2026cs.CV

UniScale: Arbitrary-Scale Industrial Anomaly Generation

Industrial anomaly inspection faces a major challenge due to the lack of real-world anomaly samples. While generative models are used to create anomaly data, existing methods still struggle when handling small-scale anomalies. This failure occurs because extreme downsampling in diffusion models causes the information of small anomalies to be lost in the latent space. To address this, we introduce UniScale, a unified training and inference framework for high-fidelity industrial anomaly generation across arbitrary scales. During training, we introduce an Error-Suppressed Multi-Scale Training (EMT) strategy, which enables the model to learn the rich location-aware textures of anomalies, while suppressing upsampling-induced interpolation errors in texture acquisition, ensuring the model is capable of learning small-scale anomalies, while remaining effective for regular scale anomalies. For inference, we propose Generation-then-Fusion Denoising. It decouples anomaly generation from background integration, preventing small anomalies from being overwhelmed. Extensive experiments demonstrate that our method outperforms state-of-the-art competitors in both anomaly generation quality and downstream detection performance. It achieves a relative IS(a) improvement of 45.86% (from 1.81 to 2.64) on VisA and 37.70% (from 1.22 to 1.68) on MVTec AD 2, while also improving the downstream pixel-level IoU by 4.22% on VisA and AUROC by 6.55% on MVTec AD 2. Code is available at https://github.com/HUST-SLOW/UniScale.

Shilei Zeng, Linxin Guan, Xurui Li +2

School of Electronic Information and Communications, Huazhong University of Science and Technology

Industrial Anomaly Detection Synthetic Anomaly Generation Diffusion Models

Aug 6, 2026cs.CV

OTLesMix: Wasserstein Barycenter and Optimal Transport Map for Synthetic Lesion Generation with Diverse Shapes and Locations

The development of deep learning over the past decade has revolutionized medical imaging segmentation, allowing the extraction of precise descriptors from large volumes to characterize pathologies. Data augmentation is a technique widely regarded as a way to improve model training. It includes simple transformations like spatial operations or intensity modifications, but also more advanced synthesis techniques. Their goal is to generate new realistic samples from an existing dataset to diversify the images used during training. Among them, several propose different mixing strategies to combine real samples. However, one of their major shortcomings is to yield limited variability in terms of generated lesion shapes and locations. In this work, we introduce a novel image synthesis method, called OTLesMix, that leverages Wasserstein barycenter and optimal transport plan to generate realistic and diverse samples. We evaluated our method on three brain lesion segmentation tasks, on which it improves the Dice score compared to a model trained without synthetic data by 2.9 to 6.6 points, and outperforms state-of-the-art mix-based methods.

Robin Trombetta, Carole Lartizien

Univ. Lyon, CNRS UMR 5220, Inserm U1294, INSA Lyon, UCBL, CREATIS, France

Synthetic Data Augmentation Medical Image Segmentation Medical Image Synthesis Synthetic Anomaly Generation

Aug 4, 2026cs.LG

SynEnergy: Anomaly Semantic-Guided Diffusion for Synthetic Energy Data Generation

Fine-grained energy consumption data are essential for applications such as demand forecasting, demand response planning, and grid reliability assessment. However, access to such data is often restricted by privacy concerns and data-sharing constraints, motivating growing interest in synthetic energy data generation. Although existing methods can reproduce overall consumption distributions and recurring temporal patterns, they often smooth out or underrepresent anomalous events caused by extreme weather, infrastructure failures, and behavioral shifts. Preserving these events is challenging because they are sparse, localized in time and space, and shaped by heterogeneous dependencies across geographical proximity and regional attributes. To address these challenges, we propose SynEnergy, a two-stage diffusion-based framework for anomaly-preserving energy consumption data generation. The first stage, Heterogeneous Graph-based Anomaly Semantic Learning (HG-ASL), extracts region-specific anomaly semantics from sparse residual structures by jointly modeling spatial and attribute dependencies across urban regions. The second stage, Anomaly Semantic-guided Diffusion (AS-Diff), injects the learned anomaly semantics into the denoising process to generate realistic consumption sequences while preserving anomalous patterns. This design enables controllable generation for individual regions and scales naturally to city-wide settings. We evaluate SynEnergy on four real-world energy consumption datasets against 11 general-purpose and energy-specific generation baselines. Experimental results show that SynEnergy improves anomaly preservation fidelity by an average of 12.21% and downstream quality by 2.96%, while maintaining competitive overall generation fidelity compared to baselines.

Lin Jiang, Dahai Yu, Ravikumar Gelli +1

Department of Computer Science Florida State University Tallahassee, Florida, USA · Department of Electrical and Computer Engineering Florida State University Tallahassee, Florida, USA

Synthetic Data Generation Time Series Generation Synthetic Anomaly Generation Diffusion Models

Jul 31, 2026cs.CV

OSAGEN: Object-Aware Mask Priors and Multistage Decoupled Diffusion for Industrial Anomaly Generation

Industrial anomaly detection and localization are limited by scarce real anomalies and pixel-level annotations, a bottleneck that synthetic image-mask pairs can alleviate. However, existing few-shot mask-guided generation may over-follow mask geometry, produce weak anomalies, or use condition masks incompatible with the current object instance. We propose OSAGEN, which combines object-aware mask priors with multistage decoupled diffusion. Its three-stage adaptation sequentially learns normal appearance, defect appearance under coarse conditions, and fine-grained mask calibration, improving defect realization and local control. QBG injects object structure from a matched normal image into mask diffusion to produce object-aware priors, while ISC restricts anomaly propagation and preserves normal content during sampling. A lightweight materialization step recovers pixel-level labels aligned with the realized defects. On MVTec AD and VisA, OSAGEN achieves AP-P/F1-P scores of 88.1/82.2 and 68.5/66.1, respectively, under a unified downstream localization protocol. The code will be released upon acceptance.

Jinyi Xu, Peng Chen, Yunkang Cao +3

School of Cyber Science and Technology, Shenzhen Campus of Sun Yat-sen University · School of Artificial Intelligence and Robotics, Hunan University · Department of Computer and Information Science, University of Macau +1

Industrial Anomaly Detection Anomaly Localization Diffusion-Based Image Generation Synthetic Anomaly Generation

Jul 23, 2026cs.CV

Synthetic data generation framework for quality control automation in gravure printing

Quality control in printing, particularly in rotogravure printing, still depends on slow, costly, and subjective manual inspection. Automated surface defect detection is critical for maintaining high-quality standards in rotogravure printing. Deep learning models give prospects for automation. However, training robust deep learning models, such as YOLO or Vision Transformers, is heavily hindered by the extreme scarcity of real-world industrial defects images. To overcome this limitation, this paper introduces a novel synthetic data generation framework tailored for rotogravure printing quality control. The proposed pipeline automatically generates high-fidelity images of specific printing defects (creases, streaks, misregistration, etc.) and outputs corresponding bounding boxes and annotations. To validate the framework, a synthetic dataset of 7533 images was generated and used to train the state-of-the-art object-detection model RFDETR. Experimental results demonstrate that the model trained on our synthetic data achieves a Mean Average Precision (mAP) of 80.9% on real industrial testing samples. This framework provides a zero-cost, rapid-deployment solution for automating defect inspection in printing lines without requiring massive manual data collection.

Korota Arsène Coulibaly, Mohamed Hamlich, Khalid Hmali +1

LCCPS Lab, ENSAM, Hassan II University of Casablanca, 150 Bd du Nil, Casablanca, 20670, , Morocco · Plastima, Commune Chellalat, Route Secondaire 3002, Mohammedia, Casablanca, , , Morroco

Synthetic Data Generation Synthetic Anomaly Generation Anomaly Detection

Jul 19, 2026cs.DB

SAGA: Synthetic Agentic Graph Architecture for Temporal Benchmark Generation

High quality temporal graph benchmarks with rich semantics and ground-truth anomaly labels are essential for training graph neural networks, yet remain scarce due to privacy constraints and annotation costs. We present SAGA (Synthetic Agentic Graph Architecture), a system for generating large-scale, semantically rich temporal graphs via a four-phase pipeline. Our Skeleton-First, Semantics-Second architecture decouples structure from semantics: (S) an O(1)-per-edge skeleton generator produces power-law graphs; (A) a dispatcher partitions causally ordered time blocks for parallel execution; (G) LLM agents inject domain semantics using RAG-based rule bases across four domains; and (A) a state alignment engine resolves conflicts via temporal replay, yielding anomaly labels as natural byproducts. Unlike structural generators (e.g., LDBC SNB, Kronecker/R-MAT) or purely LLM-based approaches, SAGA achieves structural realism, semantic richness, and automatic anomaly labeling in a unified framework. On a single H100 GPU with vLLM batching, SAGA generates 500,000 temporal edges with controlled anomalies in under 90 minutes, scaling to 100,000 nodes while maintaining clustering coefficients above 0.99. The system supports real-time pipeline visualization, interactive multi-domain tuning (Finance/AML, Network/IDS, Cyber/APT, Transportation), and a CLI for large-scale GPU-based experiments.

Jiacheng Ding, Xiaofei Zhang

University of Memphis · Memphis, Tennessee, USA · Tennessee

Synthetic Data Generation Synthetic Benchmark Generation Synthetic Anomaly Generation

Jul 12, 2026cs.CV

Physics-inspired Pseudo Anomaly Generation and Prototype Feature Guidance for 3D Anomaly Detection

3D point cloud anomaly detection plays a vital role in industrial manufacturing, yet it faces significant challenges due to the scarcity and high acquisition cost of real anomalous samples. The inherently anomaly-free training data further hinders detection methods from effectively learning discriminative features between normal and abnormal instances. To address these issues, we propose PA3AD, a novel framework that introduces a physics-inspired pseudo-anomaly generation strategy to create physically plausible anomalous samples from normal data. Additionally, we incorporate prototype features via a weight-sharing mechanism to guide the model in capturing the distribution shifts between normal and anomalous samples. Specifically, PA3AD introduces two key innovations to tackle the scarcity of real anomalies. First, a physics-inspired module generates diverse pseudo-anomalous point clouds from normal data via multi-physics modeling. Second, momentum-updated prototypes and a difference-aware fusion block capture stable normal representations and their discrepancies with pseudo-anomalies. This design effectively learns distribution shifts, achieving superior detection performance. Extensive experiments on the Anomaly-ShapeNet and Real3D-AD datasets demonstrate that our method consistently outperforms existing state-of-the-art approaches. Our code will be made publicly available at https://github.com/NingxiaoJian/PA3AD.

Jian Ning, Qin Zou, Linchun Wu +4

School of Computer Science, Wuhan University, Wuhan 430072, Hubei, China · Guangdong Laboratory of Artificial Intelligence and Digital Economy (SZ), Shenzhen 518060, Guangdong, China · School of Information and Software Engineering, East China Jiaotong University, Nanchang 330013, Jiangxi, China +1

Point Cloud Anomaly Detection Industrial Anomaly Detection Unsupervised Anomaly Detection Synthetic Anomaly Generation

Jul 8, 2026cs.GR

Multi-Conditioned Diffusion Synthesis of Sand Boils for Low-Resource Earthen-Levee Inspection

Sand boils on earthen levees are safety-critical defects, but pixel-level detection is limited by scarce annotations. We present a diffusion-based synthesis pipeline for low-resource sand-boil imagery. Using Stable Diffusion XL fine-tuned with DreamBooth and conditioned by a multi-branch ControlNet stack, the pipeline generates synthetic inspection images from a small curated reference set. A soft-mask inpainting protocol preserves the real defect pixels while re-rendering the surrounding scene, avoiding seams and color shifts from prior seamless-cloning compositing. A mask-conditioned ControlNet can also generate a new boil inside a chosen mask, making the mask the segmentation label by construction; however, because large-scale label certification remains unresolved with the available real-trained gate, we release the soft-mask preset as the default. Text conditioning is supplied by a taxonomy-driven Prompt Atlas that expands one domain specification into a stratified, CLIP-validated prompt bank and transfers to new defect classes without code changes. From the real training images, the pipeline produces 1,020 synthetic candidates, of which 815 pass a CLIP admissibility filter. We evaluate image quality using distributional and fidelity-diversity measures against the real reference set and a Poisson baseline, and audit for out-of-distribution drift and memorization. No single preset dominates; each trades off fidelity, diversity, and label reliability. We therefore release the label-reliable preset as the default and treat a curated mixture as the natural augmentation set. Our claims are limited to image quality, label provenance, and diversity; downstream segmentation is left for future work. Code and an artifact manifest are released for reproducibility.

Padam Jung Thapa, Abdullah Bin Naeem, Ayon Dey +2

University of Louisiana at Lafayette, Lafayette, LA, USA · Department of Computer Science, Louisiana State University New Orleans, New Orleans, LA, USA

Synthetic Data Augmentation Conditional Image Generation Diffusion-Based Image Generation Synthetic Anomaly Generation

Jul 1, 2026cs.CR

Generative AI and Federated Learning for Intrusion Detection Systems: A Survey

Intrusion Detection Systems (IDSs) are essential for monitoring network traffic and identifying malicious activities in modern cyber-physical, Internet of Things (IoT), enterprise, and distributed network environments. However, developing reliable IDS models remains challenging because attack behaviors evolve over time, realistic datasets are difficult to obtain, traffic records may be incomplete, attack classes are often imbalanced, and privacy constraints limit centralized data collection. Recent advances in generative artificial intelligence (AI) and Federated Learning (FL) provide new opportunities to address these limitations. Generative models can support anomaly detection, synthetic traffic generation, data augmentation, data imputation, adversarial traffic generation, and IDS alert explanation. FL enables distributed IDS training without directly sharing local network traffic, making it suitable for privacy-sensitive and geographically distributed environments. This survey provides a structured review of generative AI and FL techniques for IDS. We first summarize representative IDS research directions, including adversarial machine learning, anomaly-based detection, IoT-oriented IDS, explainable IDS, and benchmark datasets. We then categorize generative AI applications in IDS according to model families and task objectives, covering autoencoder-based models, Generative Adversarial Networks (GANs), diffusion models, and Large Language Models (LLMs). Finally, we review emerging studies that integrate generative AI with FL-based IDS and discuss open challenges, including synthetic data quality, realistic traffic generation, dual-use adversarial risks, non-IID client distributions, communication-efficient model sharing, federated IDS benchmarking, and domain-specific LLMs for network security.

Jiefei Liu, Abu Saleh Md Tayeen, Pratyay Kumar +5

Department of Computer Science, New Mexico State University, Las Cruces, NM, USA · University of Hartford, CT, USA · DEVCOM Analysis Center, WSMR, NM, USA

Network Intrusion Detection Synthetic Anomaly Generation Federated Learning

Jun 30, 2026cs.CV

SENSE-VAD: Sentient and Semantic Video Anomaly Detection for Autonomous Driving

Autonomous vehicles (AVs) must navigate not only motion-based hazards but also socially complex situations whose danger is constituted by inter-agent relationships rather than movement statistics alone. A child running away from a guardian, a person being carried by another, or a pursuer chasing a pedestrian across a sidewalk are all anomalous in social context, yet none produces an obvious motion signal that current anomaly detectors are equipped to flag. We introduce SENSE-VAD, the first synthetic video anomaly detection benchmark for autonomous driving explicitly designed around socially complex anomalies. Using the CARLA simulator and Unreal Engine (UE), we generate distinct anomaly scenarios across multiple categories: individual behaviors, group behaviors, person--object interactions, cyclist interactions, vehicle & agent, each annotated with per-frame binary labels. A key design principle is the separation of social anomaly from motion-based or appearance-based anomaly: many scenarios involve motion of objects that appears unremarkable in isolation but is anomalous in relational context. We additionally provide real-world normal and anomalous videos as a sim-to-real transfer probe. We evaluate state-of-the-art video anomaly detection baselines and demonstrate that socially complex anomalies constitute a distinct and currently unsolved challenge. Our dataset, annotations, and generation code are publicly available.

Nghia T. Nguyen, Lokman Bekit, Yasin Yilmaz

University of South Florida

Autonomous Driving Benchmarks Video Anomaly Detection Synthetic Anomaly Generation Anomaly Detection

Jun 29, 2026cs.LG

Redefining Maritime Anomaly Detection via Equation-Grounded Synthetic Anomalies

Maritime anomaly detection is essential for ensuring maritime safety, security, and efficient traffic management at sea, with Automatic Identification System (AIS) data serving as a primary data source. Despite its importance, most publicly available AIS datasets lack predefined anomaly labels, forcing prior studies to rely on either distribution-based rarity or domain rule/expert-assisted labeling. These approaches, however, face fundamental limitations: statistical rarity often fails to reflect practically critical events, while expert-based labeling is costly, subjective, and difficult to scale. Moreover, both paradigms tend to overlook interaction-driven hazards such as near-miss approaches between vessels. To address these challenges, we propose an equation-grounded anomaly taxonomy that is implementable under a limited AIS observation schema and extensible to other AIS datasets. Specifically, the taxonomy defines three anomaly types: unexpected AIS activity (A1), route deviation (A2), and close approach (A3), covering both single-vessel and inter-vessel anomalies. Building on this taxonomy, we introduce a unified score-synthesize-label pipeline that produces LLM-guided plausibility scores, uses them to synthesize anomalies, and assigns timestamp-level labels. To rigorously assess detection performance, we further design benchmark evaluation settings that account for variations in temporal-window length and anomaly-type composition, and evaluate a broad range of time-series models and anomaly detection models. Together, these contributions provide a systematic basis for evaluating maritime anomaly detection methods across different anomaly types. Our code is available at https://github.com/snudial/open-maritime-anomaly-detection.

Youngseok Hwang, Sungho Bae, Dohun Lee +4

Seoul National University Seoul, Republic of Korea · KRISO Daejeon, Republic of Korea

Synthetic Anomaly Generation Time-Series Anomaly Detection Anomaly Detection

Jun 28, 2026cs.CV

Anomaly Factory 3D: A Modular Framework for Diverse Pseudo-Anomaly Synthesis in Unsupervised 3D Anomaly Detection

Detecting and localizing defects in 3D point clouds is challenging because abnormal samples are scarce and diverse, while training is often limited to normal data. We propose Anomaly Factory 3D (AF3AD), a modular framework that synthesizes diverse pseudo-anomalies from normal point clouds to expand the training data for unsupervised 3D anomaly detection methods that rely on pseudo-anomalies. AF3AD uses a center-conditioned parametric deformation model defined in local PCA frames, with kernel-controlled spatial falloff, anisotropy, directional gating, and normal/tangential displacement fields, enabling a broad set of geometric defect presets. We demonstrate its ease-of-use and effectiveness by integrating AF3AD with an offset-prediction detector and a reconstruction-based anomaly detection method, showing that AF3AD transfers across detection paradigms. Experiments on AnomalyShapeNet and Real3D-AD show consistent improvements in object- and point-level detection and localization, supported by ablations on preset groups and robustness under noise. AF3AD is designed as a standalone synthesis tool to facilitate adoption across different 3D anomaly detection paradigms. Code is available at github.com/vpc-ccg/AF3AD.

Ali Balapour, Faraz Hach

University of British Columbia, Vancouver, V6T 1Z4 BC, Canada · Vancouver Prostate Centre, M.H. Mohseni Institute of Urologic Sciences, Vancouver, V6H 3ZB BC, Canada · Department of Urologic Sciences, The University of British Columbia, Vancouver, V5Z 1M9 BC, Canada

Point Cloud Anomaly Detection Anomaly Localization Unsupervised Anomaly Detection Synthetic Anomaly Generation

Jun 24, 2026cs.CV

Point Cloud Diffusion with Global and Local Reconstruction for Instance-Level 3D Anomaly Detection

3D anomaly detection in point clouds is critical for high-precision industrial manufacturing. Reconstruction-based methods have laid a strong foundation by detecting 3D anomalies through comparisons between defective inputs and their reconstructed normal counterparts. However, existing methods still suffer from two challenges: 1) the foreground weak defective regions such as scratches are hard to reconstruct and detect, where the anomaly deviations in normalized point clouds can be as small as

10^{-3}

; 2) the background non-defective regions are prone to get positional bias in reconstruction, which leads to false positives. To address these challenges, we propose \textbf{PCDiff}, a point cloud diffusion framework for instance-level 3D anomaly generation and detection. In the generation phase, an instance-level multi-modal attention is embedded into the generation framework, where anomalies are conditioned with texture gradient, image patch, text and mask. The instance-level condition enables the high-quality generation of weak-defective anomalies. In the detection phase, a joint local-global reconstruction algorithm is introduced to ensure local anomaly restoration and global geometric consistency, which preserves background normal structure while restoring the foreground defect. Extensive experiments demonstrate that the proposed PCDiff significantly outperforms state-of-the-art methods in both 3D anomaly generation fidelity and reconstruction quality, leading to substantial improvements in anomaly detection accuracy.

Linchun Wu, Qin Zou, Jiwen Lu +1

School of Computer Science, Wuhan University, Wuhan 430072, China · Department of Automation, Tsinghua University, Beijing 100084, China · Guangdong Artificial Intelligence and Digital Economy Laboratory (SZ), Shenzhen 518060, China

Point Cloud Anomaly Detection Industrial Anomaly Detection Reconstruction-Based Anomaly Detection Unsupervised Anomaly Detection Synthetic Anomaly Generation Diffusion Models

Jun 9, 2026cs.AI

Mobility Anomaly Generation using LLM-Driven Behavior with Kinematic Constraints

Although the study of human trajectory anomalies is critical for advancing spatial data mining, empirical research remains severely hindered by a pervasive lack of ground-truth datasets. Despite the availability of several real-world and simulated human trajectory collections, these datasets exclusively capture normal mobility patterns and lack annotated anomalies. This specific scarcity is fundamentally driven by the inherent statistical rarity of anomalous events, precluding the feasibility of conventional observational methods. Compounding this challenge, the systematic acquisition of large-scale mobility data is strictly bottlenecked by prohibitive costs and stringent privacy regulations. To overcome these fundamental limitations and establish a reliable human trajectory anomalies dataset with annotated ground truth, we introduce a novel, end-to-end generative framework designed to synthesize realistic trajectory anomalies at scale. Our architecture bridges the gap between purely synthetic mobility data and complex real-world physical constraints by operating directly on baseline simulated trajectories. We employ Large Language Model (LLM) agents to systematically inject semantically meaningful behavioral anomalies such as irregular out-of-distribution check-ins and skipped routine visits. To ensure rigorous spatial validity, the system leverages map-constrained routing reconstruction to recalculate the physical transitions between these LLM agent-modified staypoints. Moreover, to narrow the simulation-to-reality gap, we augment the resulting trajectories with a context-aware spatial noise model, parameterized by environmental and location-specific variables, to accurately emulate heterogeneous GPS sensor degradation.

Yueyang Liu, Joon-Seok Kim, Andreas Züfle

Emory University, Atlanta, USA

Synthetic Data Generation Synthetic Anomaly Generation

Jun 2, 2026cs.LG

TPA-AD: A Two-Stage Pseudo Anomaly-Guided Method for Bearing Time-Series Anomaly Detection

This paper proposes a two-stage pseudo anomaly-guided anomaly detection method (\textbf{T}wo-stage \textbf{P}seudo \textbf{A}nomaly-guided \textbf{A}nomaly \textbf{D}etection, \textbf{TPA-AD}) for axle-box bearing time-series anomaly detection (time series anomaly detection, TSAD) under the setting where only normal samples are available for training. The method first generates pseudo-anomalous windows near the normal boundary using a reconstruction model and per-feature target-error control. It then learns anomaly-sensitive representations through contrastive learning between normal and pseudo-anomalous windows, and finally produces window-level and point-level anomaly scores using k-nearest neighbors (KNN). Compared with existing methods that rely on known fault categories, real anomaly priors, or random anomaly injection, TPA-AD improves the separability of the normal boundary by constructing pseudo-anomalies in boundary neighborhoods and can jointly handle continuous and discrete features in mixed-variable scenarios. The main experiments are conducted on bearing fault detection datasets and degradation-process datasets, with an additional exploratory extension on

13

public TSAD datasets. The results show that the proposed method yields relatively stable anomaly responses, is sensitive to degradation evolution, and demonstrates a certain degree of broader applicability on public TSAD benchmarks and real high-speed-train-related bearing data.

Xiancheng Wang, Zhibo Zhang, Ran Li +4

School of Ocean Engineering, Harbin Institute of Technology, West Wenhua Road, Weihai, 264209, Shandong, China · Technical Center, Bogie Development Department, CRRC Qingdao Sifang Locomotive and Rolling Stock Co., Ltd, Jinhong East Road, Qingdao, 266111, Shandong, China · Qingdao University, No. 308 Ningxia Road, Qingdao, 266071, Shandong, China

Fault Detection Unsupervised Anomaly Detection Bearing Fault Diagnosis Synthetic Anomaly Generation Time-Series Anomaly Detection

May 6, 2026cs.CV

UniPCB: A Generation-Assisted Detection Framework for PCB Defect Inspection

In the Industrial Internet of Things (IIoT), enabling intelligent, real-time Printed Circuit Board (PCB) defect inspection is critical for ensuring product reliability. However, existing IIoT-based visual inspection systems face two compounding challenges: scarce and imbalanced defect samples that limit model training, and insufficient feature representation under complex circuit backgrounds. Existing generation methods rely on single-modality conditions with coarse structural control, while detection methods improve architectures without addressing the data bottleneck. To resolve both challenges jointly, we propose a generation-assisted PCB defect inspection framework that integrates controlled defect synthesis with task-specific defect detection within an IIoT-enabled pipeline. On the generation side, a Multi-modal Condition Generator extracts complementary edge, depth, and text conditions in parallel. A ScaleEncoder then embeds these conditions into the diffusion U-Net at four resolutions, and a Condition Modulation applies FiLM-style spatially-adaptive modulation at each scale, enabling structurally aligned and defect-aware sample synthesis to augment the scarce IIoT dataset. On the detection side, an Inverted Residual Shift Attention couples self-attention with shift-wise convolution to jointly capture global context and local texture, and a Cross-level Complementary Fusion Block generates pixel-level gates for selective cross-level feature fusion. The synthesized samples directly enrich the detection training set, so that improvements in generation compound with improvements in detection. Extensive experiments on DsPCBSD+ demonstrate that UniPCB achieves [email protected] of 98.0% and [email protected]:0.95 of 61.8% on defect detection, surpassing all compared methods, while the generation branch attains an FID of 129.61 and SSIM of 0.619, outperforming existing conditional generation approaches.

Huan Zhang, Lianghong Tan, Yichu Xu +5

School of Information Engineering, Guangdong University of Technology, Guangzhou 510006, China · School of Computer Science, Wuhan University, Wuhan 430072, China · Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences, Shenzhen 518055, China

Conditional Image Generation Industrial Inspection Diffusion-Based Image Generation Synthetic Anomaly Generation

Apr 29, 2026cs.CV

SynSur: An end-to-end generative pipeline for synthetic industrial surface defect generation and detection

The bottleneck in learning-based industrial defect detection is often limited not by model capacity, but by the scarcity of labeled defect data: defects are rare, annotations are expensive, and collecting balanced training sets is slow. We present an end-to-end pipeline for synthetic defect generation and annotation, combining Vision-Language-Model-based prompts, LoRA-adapted diffusion, mask-guided inpainting, and sample filtering with automatic label derivation, and demonstrates the potential of real data with realistic synthetic samples to overcome data scarcity. The evaluation is conducted on, a challenging dataset of pitting defects on ball screw drives, and then on a subset of the Mobile phone screen surface defect segmentation dataset (MSD) dataset to test cross-domain transfer. Beyond downstream detector performance, we analyze key stages of the pipeline, including prompt construction, LoRA selection, and sample filtering with DreamSim and CLIPScore, to understand which synthetic samples are both realistic and useful. Experiments with YOLOv26, YOLOX, and LW-DETR show that synthetic-only training does not replace real data. When combined with real data, synthetic defects can preserve performance and yield modest gains in selected BSData training regimes. The MSD transfer study shows that the overall pipeline structure carries over to a second industrial inspection domain, while also highlighting the importance of domain-specific adaptation and annotation-quality control. Overall, the paper provides an end-to-end assessment of diffusion-based industrial defect synthesis and shows that its strongest value lies in strengthening scarce real datasets rather than substituting for them.

Paul Julius Kühn, Mika Pommeranz, Arjan Kuijper +1

Fraunhofer IGD, 64283 Darmstadt, Germany

Synthetic Data Augmentation Industrial Anomaly Detection Diffusion-Based Image Generation Synthetic Anomaly Generation

Apr 22, 2026cs.CV

Accelerating New Product Introduction for Visual Quality Inspection via Few-Shot Diffusion-Based Defect Synthesis

Industrial visual inspection systems often suffer from a severe scarcity of labeled defect data, particularly during the early stages of New Product Introduction (NPI). This limitation hinders the deployment of robust supervised detectors precisely when automated quality control is most needed. We present an end-to-end generative framework for high-fidelity, few-shot defect synthesis that enables both in-domain augmentation and cross-domain transfer. Our approach disentangles defect morphology from background appearance by combining masked textual inversion for defect representation learning, noise-blended conditioned generation for surface-aware synthesis, and gradient-aware post-processing for seamless visual integration. We evaluate the framework in two practically relevant settings: few-shot data augmentation, where synthetic samples enrich a small set of real defects, and zero-shot adaptation, where defects learned from a source domain are transferred to a novel target surface without any real target-domain defect examples. Using RF-DETR as the downstream detector, we show that the proposed pipeline substantially narrows the domain gap on a private industrial dataset. In the few-shot setting, synthetic augmentation improves mAP from 78.8% to 83.3%. In the zero-shot setting, synthetic domain adaptation improves mAP from 65.0% to 85.1%. These results demonstrate that high-fidelity defect synthesis can meaningfully accelerate NPI by enabling effective inspection models before sufficient real defect data has been collected.

Serkan Hamdi Güğül, Kemal Levi, Burak Acar

Relimetrics, Inc.

Synthetic-to-Real Domain Adaptation Synthetic Data Augmentation Industrial Inspection Diffusion-Based Image Generation Synthetic Anomaly Generation

Apr 21, 2026cs.AI

Industrial Surface Defect Detection via Diffusion Generation and Asymmetric Student-Teacher Network

Industrial surface defect detection often suffers from limited defect samples, severe long-tailed distributions, and difficulties in accurately localizing subtle defects under complex backgrounds. To address these challenges, this paper proposes an unsupervised defect detection method that integrates a Denoising Diffusion Probabilistic Model (DDPM) with an asymmetric teacher-student architecture. First, at the data level, the DDPM is trained solely on normal samples. By introducing constant-variance Gaussian perturbations and Perlin noise-based masks, high-fidelity and physically consistent defect samples along with pixel-level annotations are generated, effectively alleviating the data scarcity problem. Second, at the model level, an asymmetric dual-stream network is constructed. The teacher network provides stable representations of normal features, while the student network reconstructs normal patterns and amplifies discrepancies between normal and anomalous regions. Finally, a joint optimization strategy combining cosine similarity loss and pixel-wise segmentation supervision is adopted to achieve precise localization of subtle defects. Experimental results on the MVTecAD dataset show that the proposed method achieves 98.4% image-level AUROC and 98.3% pixel-level AUROC, significantly outperforming existing unsupervised and mainstream deep learning methods. The proposed approach does not require large amounts of real defect samples and enables accurate and robust industrial defect detection and localization. \keywords{Industrial defect detection \and diffusion models \and data generation \and teacher-student architecture \and pixel-level localization}

Shuo Feng, Runlin Zhou, Yuyang Li +1

School of Automation, Southeast University, Nanjing, China

Industrial Anomaly Detection Synthetic Anomaly Generation Teacher-Student Learning

Apr 20, 2026cs.AI

Enhancing Tabular Anomaly Detection via Pseudo-Label-Guided Generation

Identifying anomalous instances in tabular data is essential for improving data reliability and maintaining system stability. Due to the scarcity of ground-truth anomaly labels, existing methods mainly rely on unsupervised anomaly detection models, or exploit a small number of labeled anomalies to facilitate detection via sample generation or contrastive learning. However, unsupervised methods lack sufficient anomaly awareness, while current generation and contrastive approaches tend to compute anomalies globally, overlooking the localized anomaly patterns of tabular features, resulting in suboptimal detection performance. To address these limitations, we propose PLAG, a pseudo-label-guided anomaly generation method designed to enhance tabular anomaly detection. Specifically, by utilizing pseudo-anomalies as guidance signals and decoupling the overall anomaly quantification of a sample into an accumulation of feature-level abnormalities, PLAG not only effectively obviates the need for scarce ground-truth labels but also provides a novel perspective for the model to comprehend localized anomalous signals at a fine-grained level. Furthermore, a two-stage data selection strategy is proposed, integrating format verification and uncertainty estimation to rigorously filter candidate samples, thereby ensuring the fidelity and diversity of the synthetic anomalies. Ultimately, these filtered synthetic anomalies serve as robust discriminative guidance, empowering the model to better separate normal and anomalous instances. Extensive experiments demonstrate that PLAG achieves state-of-the-art performance against eight representative baselines. Moreover, as a flexible framework, it integrates seamlessly with existing unsupervised detectors, consistently boosting F1-scores by 0.08 to 0.21.

Wei Huang, Yuxuan Xiong, Hezhe Qiao +3

Tabular Anomaly Detection Pseudo-Labeling Synthetic Anomaly Generation Anomaly Detection

Apr 19, 2026cs.LG

TransXion: A High-Fidelity Graph Benchmark for Realistic Anti-Money Laundering

Money laundering poses severe risks to global financial systems, driving the widespread adoption of machine learning for transaction monitoring. However, progress remains stifled by the lack of realistic benchmarks. Existing transaction-graph datasets suffer from two pervasive limitations: (i) they provide sparse node-level semantics beyond anonymized identifiers, and (ii) they rely on template-driven anomaly injection, which biases benchmarks toward static structural motifs and yields overly optimistic assessments of model robustness. We propose TransXion, a benchmark ecosystem for Anti-Money Laundering (AML) research that integrates profile-aware simulation of normal activity with stochastic, non-template synthesis of illicit subgraphs.TransXion jointly models persistent entity profiles and conditional transaction behavior, enabling evaluation of "out-of-character" anomalies where observed activity contradicts an entity's socio-economic context. The resulting dataset comprises approximately 3 million transactions among 50,000 entities, each endowed with rich demographic and behavioral attributes. Empirical analyses show that TransXion reproduces key structural properties of payment networks, including heavy-tailed activity distributions and localized subgraph structure. Across a diverse array of detection models spanning multiple algorithmic paradigms, TransXion yields substantially lower detection performance than widely used benchmarks, demonstrating increased difficulty and realism. TransXion provides a more faithful testbed for developing context-aware and robust AML detection methods. The dataset and code are publicly available at https://github.com/chaos-max/TransXion.

Keyang Chen, Mingxuan Jiang, Yongsheng Zhao +9

Fudan University · Peking University

Financial Fraud Detection Synthetic Benchmark Generation Synthetic Anomaly Generation Anomaly Detection

Apr 16, 2026cs.CV

How to Correctly Make Mistakes: A Framework for Constructing and Benchmarking Mistake Aware Egocentric Procedural Videos

Reliable procedural monitoring in video requires exposure to naturally occurring human errors and the recoveries that follow. In egocentric recordings, mistakes are often partially occluded by hands and revealed through subtle object state changes, while existing procedural datasets provide limited and inconsistent mistake and correction traces. We present PIE-V (Psychologically Inspired Error injection for Videos), a framework for constructing and benchmarking mistake-aware egocentric procedural videos by augmenting clean keystep procedures with controlled, human-plausible deviations. PIE-V combines a psychology-informed error planner conditioned on procedure phase and semantic step load, a correction planner that models recovery behavior, an LLM writer that performs cascade-consistent rewrites, and an LLM judge that validates procedural coherence and repairs failures. For video segment edits, PIE-V synthesizes replacement clips with text-guided video generation and stitches them into the episode to preserve visual plausibility. Applied to 17 tasks and 50 Ego-Exo4D scenarios, PIE-V injects 102 mistakes and generates 27 recovery corrections. For benchmarking, we introduce a unified taxonomy and a human rubric with nine metrics that cover step-level and procedure-level quality, including plausibility, procedure logic with annotator confidence, state change coherence, and grounding between text and video. Using this protocol, we audit several existing resources and compare PIE-V against a freeform LLM generation baseline under the same criteria. Together, the framework and rubric support post-completion verification for egocentric procedural mistake detection and correction.

Olga Loginova, Frank Keller

University of Trento · Italy · University of Edinburgh +1

Benchmark Construction Egocentric Video Understanding Synthetic Anomaly Generation Video Generation Evaluation

Apr 14, 2026cs.AI

Fun-TSG: A Function-Driven Multivariate Time Series Generator with Variable-Level Anomaly Labeling

Reliable evaluation of anomaly detection methods in multivariate time series remains an open challenge, largely due to the limitations of existing benchmark datasets. Current resources often lack fine-grained anomaly annotations, do not provide explicit intervariable and temporal dependencies, and offer little insight into the underlying generative mechanisms. These shortcomings hinder the development and rigorous comparison of detection models, especially those targeting interpretable and variable-specific outputs. To address this gap, we introduce Fun-TSG, a fully customizable time series generator designed to support high-quality evaluation of anomaly detection systems. Our tool enables both fully automated generation, based on randomly sampled dependency structures and anomaly types, and manual generation through user-defined equations and anomaly configurations. In both cases, it provides full transparency over the data generation process, including access to ground-truth anomaly labels at the variable and timestamp levels. Fun-TSG supports the creation of diverse, interpretable, and reproducible benchmarking scenarios, enabling fine-grained performance analysis for both classical and modern anomaly detection models.

Pierre Lotte, André Péninou, Olivier Teste

EPE UT, IRIT · Université de Toulouse, IRIT, CNRS · UT2J, IRIT-SIG, IRIT +2

Time Series Generation Anomaly Localization Synthetic Benchmark Generation Synthetic Anomaly Generation Time-Series Anomaly Detection

Jan 14, 2026cs.CV

Knowledge-Embedded and Hypernetwork-Guided Few-Shot Substation Meter Defect Image Generation Method

Substation meters play a critical role in monitoring and ensuring the stable operation of power grids, yet their detection of cracks and other physical defects is often hampered by a severe scarcity of annotated samples. To address this few-shot generation challenge, we propose a novel framework that integrates Knowledge Embedding and Hypernetwork-Guided Conditional Control into a Stable Diffusion pipeline, enabling realistic and controllable synthesis of defect images from limited data. First, we bridge the substantial domain gap between natural-image pre-trained models and industrial equipment by fine-tuning a Stable Diffusion backbone using DreamBooth-style knowledge embedding. This process encodes the unique structural and textural priors of substation meters, ensuring generated images retain authentic meter characteristics. Second, we introduce a geometric crack modeling module that parameterizes defect attributes--such as location, length, curvature, and branching pattern--to produce spatially constrained control maps. These maps provide precise, pixel-level guidance during generation. Third, we design a lightweight hypernetwork that dynamically modulates the denoising process of the diffusion model in response to the control maps and high-level defect descriptors, achieving a flexible balance between generation fidelity and controllability. Extensive experiments on a real-world substation meter dataset demonstrate that our method substantially outperforms existing augmentation and generation baselines. It reduces Frechet Inception Distance (FID) by 32.7%, increases diversity metrics, and--most importantly--boosts the mAP of a downstream defect detector by 15.3% when trained on augmented data. The framework offers a practical, high-quality data synthesis solution for industrial inspection systems where defect samples are rare.

Jackie Alex, Justin Petter

St. Petersburg College

Synthetic Data Augmentation Image Generation Diffusion-Based Image Generation Synthetic Anomaly Generation Controllable Image Generation