Tactile Sensing for Robotic Manipulation

Video-Action Models (VAMs) have emerged as a promising framework for embodied intelligence, learning implicit world dynamics from raw video streams to produce temporally consistent action predictions. Although such models demonstrate strong performance on long-horizon tasks through visual reasoning, they remain limited in contact-rich scenarios where critical interaction states are only partially observable from vision alone. In particular, fine-grained force modulation and contact transitions are not reliably encoded in visual tokens, leading to unstable or imprecise behaviors. To bridge this gap, we introduce the Video-Tactile Action Model (VTAM), a multimodal world modeling framework that incorporates tactile perception as a complementary grounding signal. VTAM augments a pretrained video transformer with tactile streams via a lightweight modality transfer finetuning, enabling efficient cross-modal representation learning without tactile-language paired data or independent tactile pretraining. To stabilize multimodal fusion, we introduce a tactile regularization loss that enforces balanced cross-modal attention, preventing visual latent dominance in the action model. VTAM demonstrates superior performance in contact-rich manipulation, maintaining a robust success rate of 90 percent on average. In challenging scenarios such as potato chip pick-and-place requiring high-fidelity force awareness, VTAM outperforms the pi 0.5 baseline by 80 percent. Our findings demonstrate that integrating tactile feedback is essential for correcting visual estimation errors in world action models, providing a scalable approach to physically grounded embodied foundation models.

Stable and reliable grasp is critical to robotic manipulations especially for fragile and glazed objects, where the grasp force requires precise control as too large force possibly damages the objects while small force leads to slip and fall-off. Although it is assumed the objects to manipulate is grasped firmly in advance, slip detection and timely prevention are necessary for a robot in unstructured and universal environments. In this work, we addressed this issue by utilizing multimodal tactile feedback from a five-fingered bio-inspired hand. Motivated by human hands, the tactile sensing elements were distributed and embedded into the soft skin of robotic hand, forming 24 tactile channels in total. Different from the threshold method that was widely employed in most existing works, we converted the slip detection problem to contact status recognition in combination with binning technique first and then detected the slip onset time according to the recognition results. After the 24-channel tactile signals passed through discrete wavelet transform, 17 features were extracted from different time and frequency bands. With the optimal 120 features employed for status recognition, the test accuracy reached 96.39% across three different sliding speeds and six kinds of materials. When applied to four new unseen materials, a high accuracy of 91.95% was still achieved, which further validated the generalization of our proposed method. Finally, the performance of slip detection is verified based on the trained model of contact status recognition.

Tactile sensing is a crucial capability for Vision-Language-Action (VLA) architectures, as it enables dexterous and safe manipulation in contact-rich tasks. However, reliance on dedicated tactile hardware increases cost and reduces reproducibility across robotic platforms. We argue that tactile-aware manipulation can be learned offline and deployed without direct haptic feedback at inference. To this end, we present HapticVLA, which proceeds in two tightly coupled stages: Safety-Aware Reward-Weighted Flow Matching (SA-RWFM) and Tactile Distillation (TD). SA-RWFM trains a flow-matching action expert that incorporates precomputed, safety-aware tactile rewards penalizing excessive grasping force and suboptimal grasping trajectories. TD further transfers this tactile-aware capability into a conventional VLA: we distill a compact tactile token from the SA-RWFM teacher and train a student VLA to predict that token from vision and state modalities, enabling tactile-aware action generation at inference without requiring on-board tactile sensors. This design preserves contact-rich tactile-aware reasoning within VLA while removing the need for on-board tactile sensors during deployment. On real-world experiments, HapticVLA achieves a mean success rate of 86.7%, consistently outperforming baseline VLAs - including versions provided with direct tactile feedback during inference.

Robotic contact-rich and fine-grained manipulation remains a significant challenge due to complex interaction dynamics and the competing requirements of multi-timescale control. While current visual imitation learning methods excel at long-horizon planning, they often fail to perceive critical interaction cues like friction variations or incipient slip, and struggle to balance global task coherence with local reactive feedback. To address these challenges, we propose M2-ResiPolicy, a novel Master-Micro residual control architecture that synergizes high-level action guidance with low-level correction. The framework consists of a Master-Guidance Policy (MGP) operating at 10 Hz, which generates temporally consistent action chunks via a diffusion-based backbone and employs a tactile-intensity-driven adaptive fusion mechanism to dynamically modulate perceptual weights between vision and touch. Simultaneously, a high-frequency (60 Hz) Micro-Residual Corrector (MRC) utilizes a lightweight GRU to provide real-time action compensation based on TCP wrench feedback. This policy is further integrated with a force-mixed PBIC execution layer, effectively regulating contact forces to ensure interaction safety. Experiments across several demanding tasks including fragile object grasping and precision insertion, demonstrate that M2-ResiPolicy significantly outperforms standard Diffusion Policy (DP) and state-of-the-art Reactive Diffusion Policy (RDP), achieving a 93% damage-free success rate in chip grasping and superior force regulation stability.

Vision-Language-Action (VLA) models have demonstrated significant advantages in robotic manipulation. However, their reliance on vision and language often leads to suboptimal performance in tasks involving visual occlusion, fine-grained manipulation, and physical contact. To address these challenges, we propose TacVLA, a fine-tuned VLA model by incorporating tactile modalities into the transformer-based policy to enhance fine-grained manipulation capabilities. Specifically, we introduce a contact-aware gating mechanism that selectively activates tactile tokens only when contact is detected, enabling adaptive multimodal fusion while avoiding irrelevant tactile interference. The fused visual, language, and tactile tokens are jointly processed within the transformer architecture to strengthen cross-modal grounding during contact-rich interaction. Extensive experiments on constraint-locked disassembly, in-box picking and robustness evaluations demonstrate that TacVLA outperforms baselines, %including existing VLA models and diffusion policies, improving the performance by averaging 20% success rate in disassembly and 60% in in-box picking, achieving a 2.1$\times$ improvement under visual occlusion, and showing recovery behavior under human disturbance. Videos are available at https://sites.google.com/view/tacvla.

Recent advancements in integrating tactile sensing into vision-language-action (VLA) models have demonstrated transformative potential for robotic perception. However, existing tactile representations predominantly rely on qualitative descriptors (e.g., texture), neglecting quantitative contact states such as force magnitude, contact geometry, and principal axis orientation, which are indispensable for fine-grained manipulation. To bridge this gap, we propose FG-CLTP, a fine-grained contrastive language tactile pretraining framework. We first introduce a novel dataset comprising over 100k tactile 3D point cloud-language pairs that explicitly capture multidimensional contact states from the sensor's perspective. We then implement a discretized numerical tokenization mechanism to achieve quantitative-semantic alignment, effectively injecting explicit physical metrics into the multimodal feature space. The proposed FG-CLTP model yields a 95.9% classification accuracy and reduces the regression error (MAE) by 52.6% compared to state-of-the-art methods. Furthermore, the integration of 3D point cloud representations establishes a sensor-agnostic foundation with a minimal sim-to-real gap of 3.5%. Building upon this fine-grained representation, we develop a 3D tactile-language-action (3D-TLA) architecture driven by a flow matching policy to enable multimodal reasoning and control. Extensive experiments demonstrate that our framework significantly outperforms strong baselines in contact-rich manipulation tasks, providing a robust and generalizable foundation for tactile-language-action models.

High-fidelity visuo-tactile sensing is important for precise robotic manipulation, yet most vision-based tactile sensors rely on opaque coatings that enable tactile sensing but block direct visual observation. We propose MuxGel, a spatially multiplexed sensor that captures both external visual information and contact-induced tactile signals through a single camera. By using a checkerboard coating pattern, MuxGel interleaves tactile-sensitive regions with transparent windows for external vision. This design maintains standard form factors, allowing for plug-and-play integration into GelSight-style sensors by simply replacing the gel pad. To recover dense visual and tactile signals from the multiplexed inputs, we develop a U-Net-based reconstruction framework trained with a sim-to-real pipeline. Experiments on unseen objects demonstrate the framework's generalization and accuracy. We further demonstrate MuxGel in grasping tasks, where visual feedback supports alignment and tactile feedback supports contact interaction. Results show that MuxGel enables single-camera dual-modal sensing within a GelSight-style implementation, providing local visual feedback and reconstructed tactile feedback with potential extension to other optical tactile sensors. Project webpage: https://zhixianhu.github.io/muxgel/.

Robotic disassembly involves contact-rich interactions in which successful manipulation depends not only on geometric alignment but also on force-dependent state transitions. While vision-based policies perform well in structured settings, their reliability often degrades in tight-tolerance, contact-dominated, or deformable scenarios. In this work, we systematically investigate the role of tactile sensing in robotic disassembly through both simulation and real-world experiments. We construct five rigid-body disassembly tasks in simulation with increasing geometric constraints and extraction difficulty. We further design five real-world tasks, including three rigid and two deformable scenarios, to evaluate contact-dependent manipulation. Within a unified learning framework, we compare three sensing configurations: Vision Only, Vision + tactile RGB (TacRGB), and Vision + tactile force field (TacFF). Across both simulation and real-world experiments, TacFF-based policies consistently achieve the highest success rates, with particularly notable gains in contact-dependent and deformable settings. Notably, naive fusion of TacRGB and TacFF underperforms either modality alone, indicating that simple concatenation can dilute task-relevant force information. Our results show that tactile sensing plays a critical, task-dependent role in robotic disassembly, with structured force-field representations being particularly effective in contact-dominated scenarios.

Tactile sensation is essential for contact-rich manipulation tasks. It provides direct feedback on object geometry, surface properties, and interaction forces, enhancing perception and enabling fine-grained control. An inherent limitation of tactile sensors is that readings are available only when an object is touched. This precludes their use during planning and the initial execution phase of a task. Predicting tactile information from visual information can bridge this gap. A common approach is to learn a direct mapping from camera images to the output of vision-based tactile sensors. However, the resulting model will depend strongly on the specific setup and on how well the camera can capture the area where an object is touched. In this work, we introduce FlowTouch, a novel model for view-invariant visuo-tactile prediction. Our key idea is to use an object's local 3D mesh to encode rich information for predicting tactile patterns while abstracting away from scene-dependent details. FlowTouch integrates scene reconstruction and Flow Matching-based models for image generation. Our results show that FlowTouch is able to bridge the sim-to-real gap and generalize to new sensor instances. We further show that the resulting tactile images can be used for downstream grasp stability prediction. Our code, datasets and videos are available at https://flowtouch.github.io/

In this paper, we address force-aware control and force distribution in robotic platforms with multi-fingered hands. Given a target goal and force estimates from tactile sensors, we design a controller that adapts the motion of the torso, arm, wrist, and fingers, redistributing forces to maintain stable contact with objects of varying mass distribution or unstable contacts. To estimate forces, we collect a dataset of tactile signals and ground-truth force measurements using five Xela magnetic sensors interacting with indenters, and train force estimators. We then introduce a model-based control scheme that minimizes the distance between the Center of Pressure (CoP) and the centroid of the fingertips contact polygon. Since our method relies on estimated forces rather than raw tactile signals, it has the potential to be applied to any sensor capable of force estimation. We validate our framework on a balancing task with five objects, achieving a $82.7\%$ success rate, and further evaluate it in multi-object scenarios, achieving $80\%$ accuracy. Code and data can be found here https://github.com/hsp-iit/multifingered-force-aware-control.

While Vision-Language-Action (VLA) models have demonstrated remarkable success in robotic manipulation, their application has largely been confined to low-degree-of-freedom end-effectors performing simple, vision-guided pick-and-place tasks. Extending these models to human-like, bimanual dexterous manipulation-specifically contact-rich in-hand operations-introduces critical challenges in high-fidelity data acquisition, multi-skill learning, and multimodal sensory fusion. In this paper, we propose an integrated framework to address these bottlenecks, built upon two components. First, we introduce IMCopilot (In-hand Manipulation Copilot), a suite of reinforcement learning-trained atomic skills that plays a dual role: it acts as a shared-autonomy assistant to simplify teleoperation data collection, and it serves as a callable low-level execution primitive for the VLA. Second, we present MoDE-VLA (Mixture-of-Dexterous-Experts VLA), an architecture that seamlessly integrates heterogeneous force and tactile modalities into a pretrained VLA backbone. By utilizing a residual injection mechanism, MoDE-VLA enables contact-aware refinement without degrading the model's pretrained knowledge. We validate our approach on four tasks of escalating complexity, demonstrating doubled success rate improvement over the baseline in dexterous contact-rich tasks.

Contact-rich dexterous manipulation with multi-finger hands remains an open challenge in robotics because task success depends on multi-point contacts that continuously evolve and are highly sensitive to object geometry, frictional transitions, and slip. Recently, tactile-informed manipulation policies have shown promise. However, most use tactile signals as additional observations rather than modeling contact state or how their action outputs interact with low-level controller dynamics. We present Contact-Grounded Policy (CGP), a visuotactile policy that grounds multi-point contacts by predicting coupled trajectories of actual robot state and tactile feedback, and using a learned contact-consistency mapping to convert these predictions into executable target robot states for a compliance controller. CGP consists of two components: (i) a conditional diffusion model that forecasts future robot state and tactile feedback in a compressed latent space, and (ii) a learned contact-consistency mapping that converts the predicted robot state-tactile pair into executable targets for a compliance controller, enabling it to realize the intended contacts. We evaluate CGP using a physical four-finger Allegro V5 hand with Digit360 fingertip tactile sensors, and a simulated five-finger Tesollo DG-5F hand with dense whole-hand tactile arrays. Across a range of dexterous tasks including in-hand manipulation, delicate grasping, and tool use, CGP outperforms visuomotor and visuotactile diffusion-policy baselines.

Tactile dexterous manipulation is essential to automating complex household tasks, yet learning effective control policies remains a challenge. While recent work has relied on imitation learning, obtaining high quality demonstrations for multi-fingered hands via robot teleoperation or kinesthetic teaching is prohibitive. Alternatively, with reinforcement we can learn skills in simulation, but fast and realistic simulation of tactile observations is challenging. To bridge this gap, we introduce PTLD: sim-to-real Privileged Tactile Latent Distillation, a novel approach to learning tactile manipulation skills without requiring tactile simulation. Instead of simulating tactile sensors or relying purely on proprioceptive policies to transfer zero-shot sim-to-real, our key idea is to leverage privileged sensors in the real world to collect real-world tactile policy data. This data is then used to distill a robust state estimator that operates on tactile input. We demonstrate from our experiments that PTLD can be used to improve proprioceptive manipulation policies trained in simulation significantly by incorporating tactile sensing. On the benchmark in-hand rotation task, PTLD achieves a 182% improvement over a proprioception only policy. We also show that PTLD enables learning the challenging task of tactile in-hand reorientation where we see a 57% improvement in the number of goals reached over using proprioception alone. Website: https://akashsharma02.github.io/ptld-website/.

Reliable insertion of industrial connectors remains a central challenge in robotics, requiring sub-millimeter precision under uncertainty and often without full visual access. Vision-based approaches struggle with occlusion and limited generalization, while learning-based policies frequently fail to transfer to unseen geometries. To address these limitations, we leverage tactile sensing, which captures local surface geometry at the point of contact and thus provides reliable information even under occlusion and across novel connector shapes. Building on this capability, we present Touch2Insert, a tactile-based framework for arbitrary peg insertion. Our method reconstructs cross-sectional geometry from high-resolution tactile images and estimates the relative pose of the hole with respect to the peg in a zero-shot manner. By aligning reconstructed shapes through registration, the framework enables insertion from a single contact without task-specific training. To evaluate its performance, we conducted experiments with three diverse connectors in both simulation and real-robot settings. The results indicate that Touch2Insert achieved sub-millimeter pose estimation accuracy for all connectors in simulation, and attained an average success rate of 86.7% on the real robot, thereby confirming the robustness and generalizability of tactile sensing for real-world robotic connector insertion.

In visually ambiguous manipulation such as detecting button click tactile feedback is often the sole source of ground truth. However, fusing tactile data poses a significant challenge due to a spatiotemporal mismatch: tactile perception requires high-frequency processing with long-horizon memory (System 1), whereas visual policies operate at low control frequencies (System 2). Existing architectures struggle to bridge this gap: Transformers are computationally prohibitive for high-frequency loops (>100Hz), while LSTMs suffer from forgetting over extended interaction histories. In this paper, we introduce TacMamba, a hierarchical architecture that aligns high-bandwidth tactile reflexes with low-frequency visual planning. Our approach comprises three core contributions: (1) a custom high-frequency tactile interface designed for flexible integration; (2) a Mamba-based Tactile History Compressor that encodes continuous force history into a compact state with O(1) inference latency (0.45 ms), enabling plug-and-play fusion with VLA models without joint pre-training and (3) a Tactile-Guided Dual-Stage Training strategy that leverages temporal discrimination for self-supervised representation learning and phase-uniform sampling to mitigate data sparsity. Experiments on discrete counting and implicit state switching demonstrate that TacMamba achieves 100% success rates, significantly outperforming the visual-only pi_0.5 baseline, while strictly satisfying hard real-time constraints.

Universal jamming grippers excel at grasping unknown objects due to their compliant bodies. Traditional tactile sensors can compromise this compliance, reducing grasping performance. We present acoustic sensing as a form of morphological sensing, where the gripper's soft body itself becomes the sensor. A speaker and microphone are placed inside the gripper cavity, away from the deformable membrane, fully preserving compliance. Sound propagates through the gripper and object, encoding object properties, which are then reconstructed via machine learning. Our sensor achieves high spatial resolution in sensing object size (2.6 mm error) and orientation (0.6 deg error), remains robust to external noise levels of 80 dBA, and discriminates object materials (up to 100% accuracy) and 16 everyday objects (85.6% accuracy). We validate the sensor in a realistic tactile object sorting task, achieving 53 minutes of uninterrupted grasping and sensing, confirming the preserved grasping performance. Finally, we demonstrate that disentangled acoustic representations can be learned, improving robustness to irrelevant acoustic variations.

High-speed event-driven tactile sensors are essential for achieving human-like dynamic manipulation, yet their integration is often limited by the bulkiness of standard event cameras. This paper presents SpikingTac, a miniaturized, highly integrated neuromorphic tactile sensor featuring a custom standalone event camera module, achieved with a total material cost of less than $150. We construct a global dynamic state map coupled with an unsupervised denoising network to enable precise tracking at a 1000Hz perception rate and 350Hz tracking frequency. Addressing the viscoelastic hysteresis of silicone elastomers, we propose a hysteresis-aware incremental update law with a spatial gain damping mechanism. Experimental results demonstrate exceptional zero-point stability, achieving a 100% return-to-origin success rate with a minimal mean bias of 0.8039 pixels, even under extreme torsional deformations. In dynamic tasks, SpikingTac limits the obstacle-avoidance overshoot to 6.2mm, representing a 5-fold performance improvement over conventional frame-based sensors. Furthermore, the sensor achieves sub-millimeter geometric accuracy, with Root Mean Square Error (RMSE) of 0.0952mm in localization and 0.0452~mm in radius measurement.

Vision-Based Tactile Sensors (VBTS) are essential for achieving dexterous robotic manipulation, yet the tactile sim-to-real gap remains a fundamental bottleneck. Current tactile simulations suffer from a persistent dilemma: simplified geometric projections lack physical authenticity, while high-fidelity Finite Element Methods (FEM) are too computationally prohibitive for large-scale reinforcement learning. In this work, we present Tacmap, a high-fidelity, computationally efficient tactile simulation framework anchored in volumetric penetration depth. Our key insight is to bridge the tactile sim-to-real gap by unifying both domains through a shared deform map representation. Specifically, we compute 3D intersection volumes as depth maps in simulation, while in the real world, we employ an automated data-collection rig to learn a robust mapping from raw tactile images to ground-truth depth maps. By aligning simulation and real-world in this unified geometric space, Tacmap minimizes domain shift while maintaining physical consistency. Quantitative evaluations across diverse contact scenarios demonstrate that Tacmap's deform maps closely mirror real-world measurements. Moreover, we validate the utility of Tacmap through an in-hand rotation task, where a policy trained exclusively in simulation achieves zero-shot transfer to a physical robot.

Distributed tactile sensing remains difficult to scale over large areas: dense sensor arrays increase wiring, cost, and fragility, while many alternatives provide limited coverage or miss fast interaction dynamics. We present Sound of Touch, an active acoustic tactile-sensing methodology that uses vibrating tensioned strings as sensing elements. The string is continuously excited electromagnetically, and a small number of pickups (contact microphones) observe spectral changes induced by contact. From short-duration audio signals, our system estimates contact location and normal force, and detects slip. To guide design and interpret the sensing mechanism, we derive a physics-based string-vibration simulator that predicts how contact position and force shift vibration modes. Experiments demonstrate millimeter-scale localization, reliable force estimation, and real-time slip detection. Our contributions are: (i) a lightweight, scalable string-based tactile sensing hardware concept for instrumenting extended robot surfaces; (ii) a physics-grounded simulation and analysis tool for contact-induced spectral shifts; and (iii) a real-time inference pipeline that maps vibration measurements to contact state.

We build a low-level reflex control layer driven by fast tactile feedback for multifinger grasp stabilization. Our hybrid approach combines learned tactile slip detection with model-based internal-force control to halt in-hand slip while preserving the object-level wrench. The multimodal tactile stack integrates piezoelectric sensing (PzE) for fast slip cues and piezoresistive arrays (PzR) for contact localization, enabling online construction of a contact-centric grasp representation without prior object knowledge. Experiments demonstrate reactive stabilization of multifingered grasps under external perturbations, without explicit friction models or direct force sensing. In controlled trials, slip onset is detected after 20.4 +/- 6 ms. The framework yields a theoretical grasp response latency on the order of 30 ms, with grasp-model updates in less than 5 ms and internal-force selection in about 4 ms. The analysis supports the feasibility of sub-50 ms tactile-driven grasp responses, aligned with human reflex baselines.

Successfully manipulating many everyday objects, such as potato chips, requires precise force regulation. Failure to modulate force can lead to task failure or irreversible damage to the objects. Humans can precisely achieve this by adapting force from tactile feedback, even within a short period of physical contact. We aim to give robots this capability. However, commercial grippers exhibit high cost or high minimum force, making them unsuitable for studying force-controlled policy learning with everyday force-sensitive objects. We introduce TF-Gripper, a low-cost (~$150) force-controlled parallel-jaw gripper that integrates tactile sensing as feedback. It has an effective force range of 0.45-45 N and is compatible with different robot arms. Additionally, we designed a teleoperation device paired with TF-Gripper to record human-applied grasping forces. While we can train standard low-frequency policies with the collected force data, achieving reliable performance remains challenging due to the reactive and contact-dependent nature of force-regulated manipulation. To overcome this, we propose RETAF (REactive Tactile Adaptation of Force), a framework that decouples grasping force control from arm pose prediction. RETAF regulates force at high frequency using wrist images and tactile feedback, while a base policy predicts end-effector pose and gripper open/close action. Our experiments show that, compared to position control, direct force control with TF-Gripper improves grasp stability and overall task performance across six real-world tasks. We further show that tactile feedback is essential for force regulation, and that RETAF consistently outperforms baselines and can be integrated with various base policies. We hope this work opens a path for scaling the learning of force-controlled policies in robotic manipulation. Project page: https://force-gripper.github.io .

Bimanual dexterous manipulation relies on integrating multimodal inputs to perform complex real-world tasks. To address the challenges of effectively combining these modalities, we propose DECO, a decoupled multimodal diffusion transformer that disentangles vision, proprioception, and tactile signals through specialized conditioning pathways, enabling structured and controllable integration of multimodal inputs, with a lightweight adapter for parameter-efficient injection of additional signals. Alongside DECO, we release DECO-50 dataset for bimanual dexterous manipulation with tactile sensing, consisting of 50 hours of data and over 5M frames, collected via teleoperation on real dual-arm robots. We train DECO on DECO-50 and conduct extensive real-world evaluation with over 2,000 robot rollouts. Experimental results show that DECO achieves the best performance across all tasks, with a 72.25% average success rate and a 21% improvement over the baseline. Moreover, the tactile adapter brings an additional 10.25% average success rate across all tasks and a 20% gain on complex contact-rich tasks while tuning less than 10% of the model parameters.

Tactile memory, the ability to store and retrieve touch-based experience, is critical for contact-rich tasks such as key insertion under uncertainty. To replicate this capability, we introduce Tactile Memory with Soft Robot (TaMeSo-bot), a system that integrates a soft wrist with tactile retrieval-based control to enable safe and robust manipulation. The soft wrist allows safe contact exploration during data collection, while tactile memory reuses past demonstrations via retrieval for flexible adaptation to unseen scenarios. The core of this system is the Masked Tactile Trajectory Transformer (MAT$^\text{3}$), which jointly models spatiotemporal interactions between robot actions, distributed tactile cues, force-torque measurements, and proprioceptive signals. Through masked token prediction, MAT$^\text{3}$ learns rich spatiotemporal representations by inferring missing sensory information from context, autonomously extracting task-relevant features without explicit subtask segmentation. We validate our approach on peg-in-hole tasks with diverse pegs and conditions in real-robot experiments. Our extensive evaluation demonstrates that MAT$^\text{3}$ achieves higher success rates than the baselines over all conditions and shows remarkable capability to adapt to unseen pegs and conditions.

Vision-Language-Action (VLA) models have shown remarkable generalization by mapping web-scale knowledge to robotic control, yet they remain blind to physical contact. Consequently, they struggle with contact-rich manipulation tasks that require reasoning about force, texture, and slip. While some approaches incorporate low-dimensional tactile signals, they fail to capture the high-resolution dynamics essential for such interactions. To address this limitation, we introduce DreamTacVLA, a framework that grounds VLA models in contact physics by learning to feel the future. Our model adopts a hierarchical perception scheme in which high-resolution tactile images serve as micro-vision inputs coupled with wrist-camera local vision and third-person macro vision. To reconcile these multi-scale sensory streams, we first train a unified policy with a Hierarchical Spatial Alignment (HSA) loss that aligns tactile tokens with their spatial counterparts in the wrist and third-person views. To further deepen the model's understanding of fine-grained contact dynamics, we finetune the system with a tactile world model that predicts future tactile signals. To mitigate tactile data scarcity and the wear-prone nature of tactile sensors, we construct a hybrid large-scale dataset sourced from both high-fidelity digital twin and real-world experiments. By anticipating upcoming tactile states, DreamTacVLA acquires a rich model of contact physics and conditions its actions on both real observations and imagined consequences. Across contact-rich manipulation tasks, it outperforms state-of-the-art VLA baselines, achieving up to 95% success, highlighting the importance of understanding physical contact for robust, touch-aware robotic agents.

Regulating grasping force to reduce slippage during dynamic object interaction remains a fundamental challenge in robotic manipulation, especially when objects are manipulated by multiple rolling contacts, have unknown properties (such as mass or surface conditions), and when external sensing is unreliable. In contrast, humans can quickly regulate grasping force by touch, even without visual cues. Inspired by this ability, we aim to enable robotic hands to rapidly explore objects and learn tactile-driven grasping force control under motion and limited sensing. We propose a physics-informed energy abstraction that models the object as a virtual energy container. The inconsistency between the fingers' applied power and the object's retained energy provides a physically grounded signal for inferring slip-aware stability. Building on this abstraction, we employ model-based learning and planning to efficiently model energy dynamics from tactile sensing and perform real-time grasping force optimization. Experiments in both simulation and hardware demonstrate that our method can learn grasping force control from scratch within minutes, effectively reduce slippage, and extend grasp duration across diverse motion-object pairs, all without relying on external sensing or prior object knowledge. (Video: https://youtu.be/l3TJV29Mo6w)

We present a tactile sensing method enabled by the mechanical compliance of soft robots; an externally attachable photoreflective module reads surface deformation of silicone skin to estimate contact force without embedding tactile transducers. Locating the sensor off the contact interface reduces damage risk, preserves softness, and simplifies fabrication and maintenance. We first characterize the optical sensing element and the compliant skin, thendetermine the design of a prototype tactile sensor. Compression experiments validate the approach, exhibiting a monotonic force output relationship consistent with theory, low hysteresis, high repeatability over repeated cycles, and small response indentation speeds. We further demonstrate integration on a soft robotic gripper, where the module reliably detects grasp events. Compared with liquid filled or wireembedded tactile skins, the proposed modular add on architecture enhances durability, reduces wiring complexity, and supports straightforward deployment across diverse robot geometries. Because the sensing principle reads skin strain patterns, it also suggests extensions to other somatosensory cues such as joint angle or actuator state estimation from surface deformation. Overall, leveraging surface compliance with an external optical module provides a practical and robust route to equip soft robots with force perception while preserving structural flexibility and manufacturability, paving the way for robotic applications and safe human robot collaboration.

Vision-based tactile sensing is widely used in perception, reconstruction, and robotic manipulation, yet collecting large-scale tactile data remains costly due to diverse sensor-object interactions and inconsistencies across sensor instances. Existing approaches to scaling tactile data---simulation and free-form tactile generation---often yield unrealistically rendered signals with poor transfer to highly dynamic real-world tasks. We propose \name, a two-stage controllable tactile image generation framework that generates realistic tactile images conditioned on a single reference tactile image, contact force, and contact pose. By grounding generation in these important physical priors, \name synthesizes realistic samples across different sensors while effectively capturing task-relevant variations. Across a series of downstream tasks and real-world experiments, such as object insertion, imitation learning, and object weighting, the augmented datasets using our approach consistently improve performance and demonstrate practical utility in dynamic real-world settings. Project page: https://dongyuluo.github.io/controltac.

Grasp-based manipulation tasks are fundamental to robots interacting with their environments, yet gripper state ambiguity significantly reduces the robustness of imitation learning policies for these tasks. Data-driven solutions face the challenge of high real-world data costs, while simulation data, despite its low costs, is limited by the sim-to-real gap. We identify the root cause of gripper state ambiguity as the lack of tactile feedback. To address this, we propose a novel approach employing pseudo-tactile as feedback, inspired by the idea of using a force-controlled gripper as a tactile sensor. This method enhances policy robustness without additional data collection and hardware involvement, while providing a noise-free binary gripper state observation for the policy and thus facilitating pure simulation learning to unleash the power of simulation. Experimental results across three real-world grasp-based tasks demonstrate the necessity, effectiveness, and efficiency of our approach.