cs.RONov 9, 2026

Modeling and Estimation of a Towed Marine System

Authors: Josef Matouš, Simon Hoff, Damiano Varagnolo, Marius S. Rundhovde, Kristin Y. Pettersen, Martin Saska

Organizations: Department of Engineering Cybernetics, Norwegian University of Science and Technology, Trondheim, Norway · Department of Cybernetics, Faculty of Electrical Engineering, Czech Technical University in Prague, Czech Republic · Department of Information Engineering, University of Padova, Italy · Norwegian Defence Research Establishment, Kjeller, Norway

Abstract

This paper addresses the modeling and state estimation of a towed marine system consisting of two autonomous surface vehicles (ASVs), a pair of umbilical cables, towfish, and a trailing loop cable. Inspired by the existing literature, we employ a lumped-mass modeling approach for the cables and towfish, capturing the essential dynamics while maintaining computational tractability. A Lyapunov-based analysis is conducted to verify the stability and convergence properties of the proposed model. Building on this model, we propose two state estimation methods, namely a reduced-order observer and a perfect-measurement extended Kalman filter (PMEKF), using only the measurements from the ASVs' onboard sensors. Numerical simulations and experimental results are provided to validate the effectiveness of the proposed methods.

Figures & tables

Explore similar work

May 5, 2026

Sensorless State Estimation and Control for Agile Cable-Suspended Payload Transport by Quadrotors

This work proposes a novel control and estimation approach for aerial manipulation of a cable-suspended load using Unmanned Aerial Vehicles (UAVs). Common approaches in the state of the art have practical limitations, relying on direct load measurements and Lagrangian methods for dynamic modeling. The lack of a straightforward dynamic model of the system led us to propose adopting the Udwadia-Kalaba method to explicitly incorporate the cable's geometric constraints. This formulation allowed for the consistent derivation of the tension force and its direct integration into the NMPC prediction model. Additionally, we propose a sensorless load state estimation based on the same geometric constraints. Results from real-robot experiments demonstrated that the explicit inclusion of load dynamics in the optimization problem significantly reduces trajectory-tracking errors and yields better overall performance compared to strategies based on incomplete models.
Oct 2, 2026

MOSAIC-SV: Real-Time Adaptive Identification of Vessel Dynamics for the Control and Deployment of Aquatic Robots

Model-based control of an aquatic robotic platform depends on a hydrodynamic model that is costly to identify and specific to the hull, payload, and conditions it was measured in. Here, we present MOSAIC-SV, a deployable real-time adaptive dynamics identification and control system that identifies a control-sufficient dynamics model from a spec-sheet engineering prior, without dedicated identification trials, and re-estimates it at every control step of a closed-loop mission while the controller plans on it. A physically admissible unscented Kalman filter re-estimates hydrodynamic, disturbance, and actuator parameters at every control step of the closed-loop mission; while a command-dependent consider projection withholds corrections the current command cannot attribute between actuator effectiveness and external force; and a model predictive path integral controller plans on the current estimate. In simulation on a CyberShip II plant, MOSAIC-SV recovers the transit performance of the calibrated model under static mismatch and transient changes, and stays within 20% of its own transit time at the unscaled prior when its inertia or damping prior is wrong by an order of magnitude. In on-water field trials on the Blue Robotics BlueBoat, a twin-thruster catamaran, MOSAIC-SV transits at least 25% faster and predicts its own motion with at least 56% less error than its frozen engineering prior, including under an unmodeled payload. The same MOSAIC-SV system concept was also feasibly deployed on a 6.3-tonne dual outboard monohull.
May 31, 2026

Tether-Aware Dynamic Collision Avoidance for USV-HROV Systems

Heterogeneous marine robotic systems composed of an unmanned surface vehicle (USV) and a hybrid remotely operated vehicle (HROV) have shown great potential for subsea cable inspection. In such missions, the USV tracks the HROV at the surface while supplying power and communication through an umbilical tether. However, dynamic collision avoidance for the USV during HROV tracking is challenging because the submerged tether may scrape against passing vessels, while evasive maneuvers can enlarge the USV--HROV separation, thereby increasing the likelihood of tether tautness and compromising HROV operations. To address these challenges, this work proposes a tether-aware dynamic collision avoidance method for a USV tracking an HROV. First, a tether safety-aware planar domain is introduced to represent the three-dimensional collision risk between the tether and obstacle vessels without an explicit tether shape model. Second, a tether tautness-aware velocity obstacle method is developed to achieve safe avoidance while reducing the likelihood of tether tautness. Finally, the method is integrated with line-of-sight guidance to coordinate HROV tracking and collision avoidance. Gazebo-based simulations show that the proposed method avoids dynamic obstacle vessels while maintaining tether safety and reducing the likelihood of tether tautness during USV evasive maneuvers.