3D Gaussian Splats

This paper introduces a fast method for high-quality 3D Gaussian Splatting (3DGS) reconstruction without traditional Structure-from-Motion (SfM). The proposed approach leverages 3D Foundation Models (3DFMs) for camera pose and point-cloud initialization, then jointly optimizes both camera poses and Gaussian primitives using a depth-guided loss function. This enables fast convergence even from rough initialization with as few as 50-60 input views. To further improve reconstruction quality in sparse-view scenarios, an MLP-based pose refinement module is introduced alongside depth-guided supervision from the foundation model. Extensive experiments on Mip-NeRF 360, Tanks and Temples, and RobustNeRF demonstrate that the proposed method achieves competitive reconstruction quality (23.61 dB PSNR, 0.19 LPIPS) while reducing training time to approximately three minutes per scene. The proposed method produces ready-to-use 3DGS models at a fraction of the time required by existing pipelines, making it suitable for near real-time applications in robotics, VR, and autonomous navigation.

3D Gaussian Splatting (3DGS) enables high-quality real-time novel-view synthesis, but practical scenes often contain millions of Gaussians, making compression essential for deployment on limited hardware. Existing reduction methods are effective but mostly heuristic: they provide no multiplicative approximation guarantee for the rendered objective, and thus rely heavily on costly post-pruning finetuning to recover quality. We ask a basic question: can a 3DGS scene be provably replaced by a much smaller weighted subset (coreset) while preserving the objective of interest? We first show that, in the unrestricted setting, no non-trivial multiplicative 3DGS coreset exists. We then show that multiplicative guarantees are not impossible, but resolution-dependent. For a prescribed rendering resolution, such as representative views or grids of views/rays, we provide the first weighted coreset construction theorem for 3DGS. The construction samples Gaussians by sensitivity: provable importance scores measuring each Gaussian's role in the full-scene objective. Finally, under explicit validity and log-transmittance stability assumptions, we turn this objective guarantee into a rendering guarantee. Empirically, our method is strongest where deployment needs it most: aggressive compression with no or minimal recovery compute. In prune-only and very short finetuning regimes, it achieves state-of-the-art performance, showing that principled importance estimation can be both theoretically meaningful and practically useful. Open-source code is available at https://github.com/waseem-m/3dgs_provable_coresets.

Recent advances in 3D content generation from text or images have achieved impressive results, yet view inconsistency from 2D generators and the scarcity of high-quality 3D data remain significant bottlenecks. Existing solutions typically adapt large-scale pre-trained text-to-image latent diffusion models to generate 3D Gaussian Splats (3DGS). However, these approaches often rely on training complex cascade pipelines that are computationally expensive and scalability-limited. Most critically, the quality of generated 3D assets is inherently constrained by each component capacity and compressed latent space, leading to decoding artifacts and accumulated errors. To address these limitations, we propose PixGS, a single-stage pipeline for direct high-quality 3DGS generation, which leverages recent advances in pixel-space diffusion to bypass lossy latent compression while still benefiting from the vast 2D generative priors. By directly denoising 3D Gaussian attributes at each timestep, our method enables precise, splat-level regularization of both appearance and geometry. Furthermore, we introduce a comprehensive supervision strategy that incorporates surface normals, depth, and high-frequency structural information, which is often overlooked in prior works. Experiments demonstrate that PixGS outperforms current state-of-the-art methods while maintaining a fast inference speed (1s on a single A100 GPU), offering a robust and efficient alternative to multi-stage generation pipelines.

Interactive segmentation of 3D Gaussians offers a compelling opportunity for real-time manipulation of 3D scenes, thanks to the real-time rendering capability of 3D Gaussian Splatting (3DGS). However, existing methods require a time-consuming per-scene setup - typically tens of seconds or even minutes - before interactive segmentation can begin on a raw 3DGS scene. This setup involves multi-view mask preparation, mask lifting, and feature distillation, creating a major bottleneck for online applications. To address this limitation, we aim to completely eliminate the setup stage for interactive 3DGS segmentation while keeping the segmentation time practical (under 1 second). In this work, we present SAGO (Segment Any Gaussians Online), a novel setup-free framework for interactive 3DGS segmentation. By introducing virtual drones, our method reframes the 3D segmentation problem as an online Next-Best-View (NBV) planning task formulated within a Markov process. Extensive experiments demonstrate that SAGO can extract clean 3D assets directly from 3D Gaussians with sub-second latency, thereby enabling a broad range of downstream applications such as object manipulation and scene editing. Moreover, our method achieves over a 50x speedup compared to the previous setup-free 3DGS segmentation frameworks.

Standard MipNeRF360-style 3D Gaussian Splatting (3DGS) evaluation holds out every N-th frame -- but these frames have trained neighbors on both sides, so the metric measures near-trajectory interpolation rather than spatial generalization. We introduce a fair matched-count protocol that isolates this effect: both arms train on the same number of images and differ only in whether the holdout is spread evenly (interpolation) or forms a contiguous spatial sector (extrapolation). Our primary finding is a large, consistent interpolation-extrapolation gap of 3~12dB -- several times the differences typically reported between competing methods. The gap is robust to training noise, is in two cases large enough to flip a method ranking under multi-seed confirmation, and -- crucially -- persists across three representation families, including a non-Gaussian volumetric neural radiance field (NeRF), so it reflects spatial coverage rather than any one representation. Diagnostically, it is dominated by a diffuse/geometry-proxy component and tracks each view's angular distance to its nearest training view, a zero-cost signal that also guides capture planning; loss-side regularization yields only marginal gains. Standard holdouts remain useful for near-trajectory rendering but should not, alone, be read as evidence of spatial generalization. Prior work notes protocol sensitivity; ours is, to our knowledge, the first to combine matched-count paired holdout, cross-representation quantification, and a diagnostic analysis Table 1. We describe a spatial-holdout benchmark toolkit with standardized splits and baselines for 16 scenes, which we are preparing for public release.

Fast quadrotor flight requires safe obstacle avoidance under tight onboard compute limits. While 3D Gaussian Splatting (3DGS) provides a continuous, geometry-aware scene representation for perception-driven navigation, existing 3DGS safety filters use reduced-order models such as single- and double-integrators that ignore actuator limits and assume commanded accelerations are realized instantaneously. Building on an analytic collision cone barrier for 3DGS, we introduce a nonlinear, actuator-aware safety filter enforced through the full quadrotor dynamics. We derive a high-relative-degree collision cone exponential CBF and a backup CBF that preserves QP feasibility under input constraints using a forward-simulated backup policy. Compared with a state-of-the-art 3DGS safety filter, our approach reduces trajectory jerk by 47% and runs 2.25 times faster. We validate the method in simulation and on hardware for real-time navigation in cluttered, perception-derived environments.

Audio-driven talking head synthesis has achieved impressive progress in lip synchronization and visual quality, yet generating expressive emotional avatars with controllable intensity remains challenging, especially under real-time constraints. In this paper, we present GaussianEmoTalker, an audio-driven framework for real-time emotional talking head synthesis based on 3D Gaussian Splatting. Instead of directly predicting the final emotional avatar from speech, we formulate emotional animation as a neutral-to-emotional residual deformation problem. GaussianEmoTalker first constructs an identity-specific neutral talking space with GaussianBlendshapes, which provides high-fidelity Gaussian attributes and phoneme-synchronized neutral motion. It then predicts an emotion-conditioned residual deformation by combining mesh displacement cues, audio features, emotion categories, and intensity encodings. To fuse these heterogeneous signals, we introduce a spatial-audio-emotion attention module that estimates the offsets of Gaussian attributes for expressive and temporally stable rendering. Extensive experiments demonstrate that GaussianEmoTalker achieves competitive video quality, accurate lip synchronization, controllable emotional expression, and real-time rendering compared with recent emotional talking head methods. Our project page is available at https://njust-yang.github.io/GaussianEmoTalker.github.io/

Recent advances in neural rendering have established 3D Gaussian Splatting (3DGS) as a highly efficient representation for novel view synthesis, enabling fast training and real-time rendering with strong fidelity. However, when supervision is limited to sparse input views, 3DGS tends to overfit to the observed images and generalize poorly to unseen viewpoints. We address this challenge from the perspective of flat minima (FM) optimization, which seeks solutions that remain stable under small parameter perturbations. Viewing Gaussian parameters as trainable weights, we adapt FM principles to the geometric and dynamic nature of 3DGS with a lightweight training framework. Our method regularizes optimization with controlled Gaussian perturbations that account for each Gaussian's anisotropy and the training progress, preserving fine details while improving robustness to sparse-view overfitting. To further stabilize this flat minima optimization process, we introduce periodic reinitialization, which temporarily returns non-positional parameters to their initial states for a short window. Together, these techniques integrate seamlessly into existing 3DGS pipelines without architectural changes. Experiments on LLFF and Mip-NeRF360 datasets demonstrate improved quantitative metrics and perceptual quality under sparse-view supervision, producing reconstructions that are sharper, more stable, and better generalized to novel viewpoints.

3D Gaussian Splatting (3DGS) has emerged as a powerful representation for high-fidelity rendering. However, existing assets often suffer from quality bottlenecks such as missing details and texture noise. Prior attempts to enhance these assets via 2D image processing introduce multi-view inconsistencies and high computational costs. In this paper, we propose a novel 3D-native refinement paradigm named AnchorSplat. AnchorSplat is an end-to-end deep network operating directly on 3D structures, avoiding the expensive optimization overhead of traditional 3D-2D-3D pipelines. Crucially, AnchorSplat is a strictly source-free solution requiring no original multi-view images. Central to the proposed method is the Point Anchor Mechanism, which enforces geometric consistency via local offset constraints, mitigating ill-posed mapping and gradient confounding. Furthermore, AnchorSplat replaces iterative densification with a single-pass multiplication mechanism. To facilitate research, we construct 3DGS-SR, the first large-scale benchmark for this task. Experiments demonstrate state-of-the-art results on the 3DGS-SR dataset, with throughput up to $10^5$ times faster than optimization methods. Notably, AnchorSplat exhibits robust zero-shot generalization across diverse data distributions, including generative model outputs and real-world scans.

Intrinsic decomposition which expresses image colors as the product of diffuse albedo and shading, possibly augmented with view-dependent residuals has a long history in image editing as it enables the modification of object colors and textures without altering lighting. We extend intrinsic decomposition to radiance fields represented with Gaussian splatting by proposing solutions to three key aspects of such decomposition. First, we describe how to model the intrinsic decomposition as independent sets of Gaussian primitives, which allows each set to adapt to the characteristics of the layer it represents. Second, we present an optimization procedure guided by data-driven predictions to disentangle multi-view photographs of a scene into the aforementioned intrinsic sets. Finally, we provide an editing workflow where users modify the texture of planar surfaces simply by modifying the albedo of that surface in one image. Capturing this edit within the intrinsic radiance field allows re-rendering of the edited scene with plausible lighting under arbitrary viewpoints.

Existing 3D Gaussian Splatting (3DGS) systems distribute representation capacity uniformly across a scene, ignoring the fact that many downstream robotic tasks engage only a fraction of the reconstructed geometry. This causes valuable onboard compute to be allocated towards optimizing irrelevant parts of the scene, either limiting online capacity or under-optimizing the most relevant parts of the scene. We introduce GaussLite, a task-driven 3DGS mapping system that conditions its representation density on a natural-language task specification. Given a posed RGB-D stream and a task such as "prepare to pick up the object on the desk," GaussLite uses a one-shot LLM parser to extract target and anchor objects, which are grounded per-frame by an open-vocabulary detector and segmented to produce per-pixel relevance masks in real time. The mapper allocates seeding density, gradient flow and scaling by task relevance. At matched Gaussian budget and real-time mapping at 4 Hz on resource-constrained hardware, GaussLite outperforms baselines on ROI PSNR on the Replica Dataset by an average +2.72 dB and on a real-hardware demonstration in indoor and outdoor settings by +2.23 dB. We further show that two task-specialized agents' maps can be fused into a single shared map via per-voxel voting on active-optimization counts in real time, outperforming concatenation by +3.42 dB while only sharing an average 7.08% of the map.

3D Gaussian Splatting (3DGS) has achieved remarkable success in real-time novel view synthesis, yet it suffers from severe overfitting under sparse-view settings due to insufficient geometric constraints. While recent methods introduce monocular depth priors to mitigate this, they inherently struggle with scale ambiguity and cross-view inconsistency, leading to defective geometry. In this paper, we propose StereoGS, a novel sparse-view 3DGS framework that integrates stereo priors to establish reliable binocular consistency. Unlike scale-agnostic monocular constraints, StereoGS introduces a Stereo Depth Regularization by constructing virtual stereo pairs during optimization and leveraging a foundation stereo model to enforce absolute scale and binocular-consistent structures. To further suppress overfitting and eliminate redundant primitives, we design a Gradient-Aware Opacity Decay strategy that dynamically penalizes Gaussians based on their relative opacity gradient magnitudes. Combined with a Consistency-Aware Dense Initialization using zero-shot multi-view depth estimation, StereoGS effectively anchors primitives to accurate scene surfaces. Extensive experiments on LLFF, DTU, Mip-NeRF360, and Blender datasets demonstrate that StereoGS achieves state-of-the-art performance in sparse-view settings without incurring any additional inference overhead. Project Page: https://stringerywh00.github.io/StereoGS_project_page/

Recent advances in 3D Gaussian Splatting have demonstrated unprecedented success in novel view synthesis. However, the substantial inference and storage overhead driven by high-order Spherical Harmonics (SH) are primary bottlenecks for mobile platforms. In this paper, we present Flux-GS, a real-time Gaussian Splatting method designed to achieve high-fidelity rendering with significantly reduced overhead for resource-constrained mobile platforms. We first propose a Monte Carlo Specular Energy Aggregator, sampling third-order radiance residuals and aggregating specular energy into a compact latent space. In this way, our method effectively preserves visually salient lighting features in lower-order bands without expensive distillation or pre-training. To mitigate the high-frequency details lost during compression, we introduce an Attribute-Conditioned SH Enhancement module. This module predicts Gaussian-aware offsets based on intrinsic Gaussian attributes, which enhance the first-order SH representation prior to inference, without extra inference costs. Furthermore, the original single-view gradient-based densification is prone to producing excessive Gaussians and overfitting to a certain view. We address these limitations by proposing a Multi-view Alpha-based Densification and Pruning strategy. By leveraging multi-view guidance, we ensure multi-view structure consistency and the precise removal of redundant primitives. Extensive experiments demonstrate that Flux-GS achieves substantial parameter reduction while maintaining competitive visual quality, offering a robust and scalable solution for real-time mobile rendering. Code: \textcolor{magenta}{\href{https://xiaobiaodu.github.io/flux-gs-project/}{https://xiaobiaodu.github.io/flux-gs-project/}}.

Existing 3D Gaussian Splatting (3DGS) frameworks rely on camera-specific rasterization, suffering from inconsistent solid-angle sampling and degraded performance across heterogeneous camera models (e.g., perspective, fisheye, omnidirectional). To address this limitation, we propose UniTriSplat, a unified 3DGS framework for universal cameras that reformulates Gaussian splatting on the unit sphere via HEALPix discretization. Leveraging the equal-area property of HEALPix, we construct a spherical sampling grid aligned with the angular resolution of input images. We derive the forward rendering and gradient propagation of Gaussians directly in the spherical radian domain, yielding uniform optimization behavior from narrow-FoV images to full 360-degree panoramas. To enhance perceptual reconstruction quality, we additionally introduce a HEALPix-aware SSIM loss that respects spherical neighborhood structure. Extensive experiments across diverse camera models demonstrate that UniTriSplat consistently improves cross-camera generalization while preserving geometric fidelity and rendering quality.

Merging multiple 3D Gaussian Splatting (3DGS) scenes into a single unified Gaussian representation is essential for large-scale 3D mapping and long-term map management. Despite its importance, this area remains underexplored, and existing solutions exhibit several limitations. Learning-based methods attempt direct correspondence between Gaussian primitives and require training on large 3DGS datasets. Image-based optimization methods depend heavily on coarse initialization from generic foundation models and often incur expensive refinement. We present \ourmodel. Our method constructs a 3D scene graph from a 3DGS and its rendered images, \textit{reformulating 3DGS registration as a graph registration problem}. The proposed 3D scene graph represents each 3DGS at a higher-level representation, enabling a globally consistent understanding of semantic information and structural context for accurate registration. To further construct a seamless unified scene, we introduce a Self-Supervised Test-Time Optimization. Naively merging two 3D Gaussian scenes often suffers from occlusion artifacts such as hollows and floaters. To alleviate this issue, we refine the merged Gaussians to preserve visual consistency between the original scenes and the merged scene. We evaluate our method on real and synthetic benchmarks, demonstrating competitive registration accuracy and merged scene rendering quality.

We present RefineSplat, a systematic framework that effectively constructs transient masks to identify diverse ambiguous distractors. To do this, we qualitatively and quantitatively analyze issues and propose a novel entropy-aware adaptive masking method. Unlike existing approaches that struggle to distinguish transient elements from static scenes due to color or semantic ambiguity, RefineSplat captures ambiguous distractors leveraging entropy and instance masks. Furthermore, we propose a simple yet effective entropy-aware density control to align Gaussians in ambiguous scenarios considering Entropy-aware positional gradients. Additionally, to rigorously validate our method, we first create and release the Ambiguous wild dataset, including 18 scenes where distractors and static scenes are hard to distinguish due to color or semantic resemblances. Experimental results on various datasets demonstrate that RefineSplat shows state-of-the-art performance, showing distractor-free novel view synthesis.

3D Gaussian Splatting~(3DGS) has emerged as a promising paradigm for reconstructing streamable free-viewpoint video~(FVV) from multi-view videos. However, 3DGS-based FVVs typically lack user interaction and editing capabilities, which diminishes the immersive experience. Recent research has integrated language features from CLIP into 3DGS via distillation, enabling open-vocabulary queries and supporting many downstream applications. Nevertheless, the stringent requirements of FVV, low frame size and high FPS, make current language Gaussian representations unsuitable for language-embedded FVV. In this paper, we propose DLGStream, a novel language-embedded FVV representation that streams time-varying language features alongside Gaussian attributes to support 4D environment interaction, scene editing, and spatial intelligence. Specifically, we propose a dual-opacity dynamic language Gaussian representation, which maintains two opacity attributes for color and language features to deal with performance degradation that occurs when colors and features are jointly optimized. Furthermore, we introduce an interpolation-based deformation field to reduce temporal redundancy. This deformation field can also be used for 4D frame interpolation, boosting FVV sequences from low to high FPS. Experimental results demonstrate that DLGStream achieves superior performance in both on open-vocabulary segmentation and reconstruction quality with an average frame size of merely 43 KB. The code is available on \href{https://github.com/kkkzh/DLGStream}{https://github.com/kkkzh/DLGStream}.

Lifelong scene mapping under rigid object rearrangement remains a fundamental challenge in robotics. While 3D Gaussian Splatting (3DGS) enables high-fidelity modeling, primitive-level updates often cause persistent ghosting and slow recovery. We propose CubifyGS, an object-level mapping framework that shifts dynamic maintenance from passive re-optimization to active asset management. CubifyGS models movable instances as reusable Gaussian assets, detects object appearance and disappearance, and updates maps through asset retrieval, rigid transformation, and explicit pruning rather than reconstruction from scratch. To address geometric voids and local photometric mismatch after such edits, we further propose an event-triggered adaptive optimization strategy that focuses computation on affected regions. We validate our approach on a newly constructed high-fidelity dynamic benchmark, demonstrating that CubifyGS improves artifact suppression and maintenance efficiency over representative reproducible baselines in the evaluated object-rearrangement setting.

Deformable 3D Gaussian Splatting (3DGS) has emerged as an efficient approach for rendering dynamic scenes in a wide range of 3D applications. However, existing deformation field-based approaches largely lack explicit object-level modeling, often resulting in inconsistent Gaussian deformations within individual objects and unwanted coupling between different objects. To address this limitation, we introduce a semantics-guided framework that enforces dynamic regularization at the object level, aiming to achieve spatially consistent object-wise deformation. Specifically, we first extract segmentation masks using the Segment Anything Model (SAM) and derive semantic features from input images. An object-ID map is then constructed via feature relevance matching with a predefined object dictionary. Guided by this object-ID map, we identify the pixel-wise top-k contributing Gaussians for each object and impose consistency regularization on their deformation parameters, including position, scale, and rotation. Unlike prior methods that learn deformation fields without explicit object-level constraints, our approach incorporates semantic cues to guide deformation behavior at the object level. Experimental results demonstrate that our semantics-aware regularization improves object-level deformation consistency and outperforms baseline methods in rendering quality, achieving higher PSNR and SSIM and lower LPIPS in dynamic 3DGS rendering. Our project page is available at https://dyn-reg-3dgs.github.io/.

Panoramic sensing offers wide field-of-view coverage, yet 3D reconstruction from sparse panoramas remains challenging under rotation-dominant, weak-parallax motion. In such regimes, SfM/SLAM initialization is often ill-conditioned and unreliable. We present PanoImager, an SfM-free framework that combines feed-forward pose/depth priors, geometry-conditioned diffusion view completion, and depth-guided 3DGS optimization. Given only a few panoramic images, PanoImager decomposes them into local perspective views, synthesizes auxiliary observations to enrich sparse evidence, and stabilizes Gaussian optimization for improved cross-view consistency. Experiments on multiple benchmarks show improved stability under extreme sparsity, suggesting PanoImager as an offline/background component for map refinement when SfM/SLAM fails to initialize.

Despite modeling temporal motion, dynamic 3D Gaussian Splatting (3DGS) methods still inherit a static densification strategy that is ill-suited for dynamic scenes. This neglect of temporal behavior leads to under-reconstructed and blurry dynamic regions, as short-lived Gaussians receive sparse supervision and fail to densify effectively. We propose a Visibility-Aware Densification (VAD) framework that integrates temporal visibility into the densification process, ensuring that Gaussians are refined based on their actual temporal presence. A Temporally-Adaptive Thresholding (TAT) mechanism further adjusts each Gaussian's densification threshold according to its temporal lifespan, promoting balanced refinement of both static and dynamic regions. Finally, a Temporal Offset Warping (TOW) design enhances deformation capacity around temporal centers, extending the lifespan of highly dynamic Gaussians and facilitating more effective densification. Our approach achieves substantial improvements in the visual quality of dynamic regions, outperforming existing methods across three dynamic multi-view benchmark datasets. Moreover, the proposed VAD module generalizes across diverse dynamic 3DGS methods, consistently improving dynamic reconstruction as a plug-and-play component.

3D Gaussian Splatting (3DGS) is widely used to capture and render real scenes. Compositing objects from one capture into another has applications in many domains, such as VFX, architecture and interior design, or marketing. However, extracting an object from a source scene and naively pasting it into a target scene will fail to produce realistic results due to the different lighting conditions between the two scenes. To address this problem, we introduce a diffusion model that harmonizes naively composited images with inconsistent lighting. The model is trained with a heterogeneous dataset of image pairs (inconsistent composite input, consistent output), combining synthetic, generated, and real data. Our complete 3D solution allows a user to extract an object from the source scene and composite it into the target scene. From this, the (inconsistent) views of the target scene with the composite object are rendered. Our diffusion model harmonizes each one of these views, which are finally consolidated in a 3DGS representation with a post-optimization step. Our method provides visually compelling results, making object transfer between 3DGS easy to use and significantly improving quality compared to previous methods.

Per-scene 3D Gaussian Splatting (3DGS) enables high-fidelity rendering, but practical robotic and AR scene capture pipelines often depend on external geometric initialization (e.g., SfM point clouds or depth estimates), which can be slow and brittle in on-site deployment. We present ACEsplat, a fast per-scene optimization framework that reconstructs 3D Gaussian representations from RGB images and camera poses only, without requiring external 3D priors (e.g., precomputed SfM models or supervised depth maps). ACEsplat uses a two-stage pipeline: (1) a self-supervised scene coordinate regression (SCR) module builds an internal geometry prior within 4--5 minutes; (2) SCR features and coordinate priors are fused by a lightweight Gaussian initialization head, followed by per-scene 3DGS optimization. On static-view rendering, ACEsplat achieves 29.11 dB PSNR on Wayspots with real-time SLAM poses and 33.20 dB on Cambridge Landmarks with SfM-refined poses. On RealEstate10K sparse-view novel view synthesis, it achieves competitive image fidelity under a challenging 2-view setting. ACEsplat completes scene-specific SCR mapping and 3DGS reconstruction within 15--25 minutes on a single GPU, making it a practical RGB+pose-only solution for rapid scene setup in robotics and mixed-reality applications.

3D Gaussian Splatting (3DGS) has emerged as a promising method for high-quality, real-time 3D reconstruction. To associate 3DGS with mesh representations, existing methods primarily focus on 3DGS-to-mesh reconstruction from multi-view images. In contrast, the problem of converting a mesh into 3DGS has received comparatively less attention. Instead of relying on heuristic strategies that bind 3D Gaussians to the mesh, we propose a novel white-box 3DGS construction framework, termed Mesh2GS, which generates 3DGS directly from mesh geometry based on plenoptic sampling theory, achieving Nyquist-level performance for high-quality global illumination rendering. Firstly, we propose a plenoptic sampling guided 3DGS construction strategy that theoretically derives the minimum sampling rate of the sampled views and the distribution of 3D Gaussians. Second, we propose a novel 3DGS update procedure with albedo--shading decomposition for efficient global-illumination capture. Finally, we introduce a neural illumination enhancement module to handle non-Lambertian effects. Experimental results demonstrate that our method surpasses state-of-the-art baselines and is practically effective for both real-time shared rendering and non-Lambertian effects capturing specular highlights. The project code will be released upon acceptance.

3D Gaussian Splatting (3DGS) has achieved state-of-the-art photorealistic rendering, but the representation gap prevents these assets from being physically interactive. Production-grade physics engines do not understand the 3DGS representation, while prior physics-for-3DGS methods are monolithic silos. These prior works are fundamentally limited, demonstrating only object-centric physics in isolated environments, such as on an ideal plane. They are incapable of interacting with complex static collision geometry or heterogeneous assets. We propose a novel framework that, for the first time, bridges this gap by enabling 3DGS assets to participate in scene-level, heterogeneous, multi-solver physical simulations. Our core contribution is a Representation Abstraction Framework that translates all diverse assets, including 3DGS, virtual meshes, and fluids, into a unified physical particle set. This abstraction is key to enabling complex behaviors, such as the non-rigid deformation of 3DGS assets, within a unified physics pipeline. This particle set, along with the static scene collision boundaries derived from scene capture, is processed within a solver-agnostic physics kernel. The physical results are then mapped back to drive each asset's specific visual reconstruction. This architecture unlocks capabilities impossible with prior art. We demonstrate complex, two-way interactions between deformable 3DGS assets, standard CG assets such as fluids and meshes, and large-scale captured static environments, showcasing realistic coupled phenomena that were previously unattainable.

3D Gaussian Splatting achieves exceptional real-time rendering, but its substantial computational and storage demands hinder widespread deployment. Existing accelerated paradigms often aggressively prune primitives for rapid convergence, causing severe loss of high-frequency details. To address this, we tackle the fundamental problem of achieving both exceptional rendering quality and ultra-fast reconstruction speed. In this paper, we propose ACE-GS, a progressive optimization framework tailored for accurate, compressed, and efficient scene representation. We realize that precise primitive management is the key to breaking this trade-off. Therefore, we first design a momentum consistency-guided densification strategy, strictly constraining primitive growth onto authentic geometric manifolds to avoid computational waste while significantly accelerating convergence. Building upon this efficient initialization, we deploy a statistical sensitivity-driven sparsification mechanism to precisely prune redundant primitives, yielding a further compressed footprint. Finally, to thoroughly compensate for the risk of micro-structure loss caused by the aforementioned strict primitive control, we introduce a cross-dimensional residual frequency compensation scheme that explicitly back-injects high-frequency error energy into primitive attributes, perfectly restoring sharp geometric details. Extensive experiments validate our superiority. While maintaining a highly compact scene representation, our system achieves up to 3.7 times training acceleration against the rapid framework Speedy-Splat. Requiring only 3 to 5 minutes to converge, ACE-GS secures the highest structural similarity and achieves a peak PSNR improvement of up to 0.89 dB over the original 3DGS, establishing a new benchmark for ultra-fast and high-fidelity novel view synthesis.

3D Gaussian Splatting (3DGS) has emerged as a promising technique for novel view synthesis. However, 3DGS requires dense input views to achieve high-quality rendering. In sparse-view scenarios, 3DGS often prones to overfitting, resulting in noticeable artifacts and degraded rendering quality. Previous methods explore to address this issue by introducing additional priors (e.g. depth priors) or integrating regularization techniques (e.g. Dropout). However, these methods are often applied without principled guidance. In particular, prior-based augmentation typically samples novel viewpoints randomly, while Dropout-based regularization randomly removes Gaussians. The compounded randomness introduces uncertainty and instability, limiting the fidelity of novel view synthesis. In this paper, we propose a novel method for sparse-view 3DGS that incorporates Fisher Information to quantitatively guide the utilization of geometric priors and regularization. Specifically, our method comprises two key components: (1) Stereo augmentation with Fisher Information. By leveraging Fisher Information, we actively select most informative supporting views and use depth priors to curate reliable pseudo ground truths, which reduces randomness in augmentation and improves stability and rendering fidelity; (2) Uncertainty-aware regularization. We reduce the instability of Dropout-based regularization by using Fisher Information to quantitatively measure the uncertainty of each 3D Gaussian, and adaptively adjust the removal probability, leading to more stable and effective regularization. With these two components, our method effectively mitigates overfitting and improves the stability of optimization in sparse-view 3DGS, resulting in superior rendering fidelity. Extensive experiments show that our method achieves state-of-the-art performance in sparse-view novel view synthesis benchmarks.

Accurate, site-specific channel information is crucial for optimizing next-generation wireless networks. Among various approaches, localized statistical channel modeling (LSCM), which models the channel multipath angular power spectrum (APS) from the reference signal received power (RSRP) measurement, has emerged as a state-of-the-art method tailored for efficient network optimization. However, despite its effectiveness, LSCM cannot predict APS at the vast majority of locations where no measurements are available, which significantly restricts its applicability in large-scale, real-world scenarios. To address this challenge, we present \emph{point-cloud-assisted tangent Gaussian splatting} (PC-TGS), the first framework to \emph{extrapolate} APS to unmeasured outdoor grids by integrating sparse radio measurements with dense LiDAR-based geometry. PC-TGS represents environmental scatterers as anisotropic 3D Gaussians, initialized and refined through a relaxed-mean reparameterization of the raw point cloud. A tangent-plane projection accurately maps each Gaussian into the local angular domain, while a depth-aware electromagnetic splatting process aggregates their contributions. To ensure practical deployment, we derive a closed-form Gaussian-weighted average (GWA) for APS bin integration and provide a provable error bound. { Evaluations on a LiDAR-scanned city-scale dataset (5M points, 6,310 RSRP samples) demonstrate that PC-TGS achieves better APS and RSRP prediction performance compared to state-of-the-art baselines and faster inference time for APS extrapolation task. These results highlight the potential of PC-TGS to enable geometry-aware and data-efficient channel prediction in large-scale wireless digital twins.

3D Gaussian Splatting (3DGS) enables high-fidelity and real-time 3D scene reconstruction, but scaling training to large-scale scenes requires optimizing hundreds of millions of Gaussians across multiple GPUs. Existing distributed approaches either partition scenes into isolated regions, causing global inconsistency, or rely on global Gaussian-level exchanges, which lead to substantial growth in inter-GPU communication and quickly dominate iteration time. We propose Splaxel, a communication-efficient distributed 3DGS training framework based on pixel-level local rendering and global composition. Instead of synchronizing Gaussians, each GPU renders its local subset and exchanges only partial pixel values, maintaining mathematical consistency while keeping communication cost stable as the scene size increases. Splaxel further reduces pixel-level redundancy through geometric and transmittance visibility prediction and improves GPU utilization via conflict-free camera-view consolidation. Evaluated on large-scale datasets with up to 120M Gaussians, Splaxel achieves up to 7.6$\times$ speedup over the state-of-the-art distributed 3DGS framework while preserving high reconstruction quality.

Online 3D reconstruction from monocular image sequences is a challenging and ongoing research topic. 3D Gaussian Splatting (3DGS), leveraging its high-quality real-time rendering capability, empowers online 3D reconstruction to represent dense scenes with enhanced expressiveness, and thus holds great promise for a wide range of applications such as robotics and AR/VR. However, existing online 3DGS methods still suffer from some key challenges: fragile camera pose estimation due to the lack of global optimization, and low optimization efficiency in large-scale or long-sequence scenarios. To address these issues, we propose a robust and efficient online voxelized 3DGS reconstruction framework integrated with global $\text{Sim}(3)$ optimization, which enables reliable camera tracking and efficient global loop closure for both camera poses and voxelized 3DGS. To accelerate the convergence of the voxelized 3DGS, we further introduce a color residual learning strategy, which not only boosts optimization speed but also enhances rendering quality. Extensive experiments on diverse indoor and outdoor datasets demonstrate that our method achieves state-of-the-art performance in both camera pose estimation accuracy and rendering quality, while retaining real-time efficiency. Additionally, we develop and deploy a real-world UAV-based active reconstruction system grounded on our proposed method, validating its robustness and generalizability for practical online 3D reconstruction tasks. Our code and data are available at https://github.com/TrickyGo/MoonSplat.

3D Gaussian Splatting (3DGS) has significantly advanced real-time novel view synthesis by representing scenes as dense collections of anisotropic 3D Gaussian primitives. However, the irregular spatial distribution of Gaussians often leads to poor GPU utilization, as warp divergence and redundant computation degrade rendering performance. To address this, we present Local-GS, a warp-coherent rendering paradigm that, organizes Gaussian primitives with respect to SIMT (Single Instruction, Multiple Threads) execution boundaries rather than scene geometry. Specifically, we propose three warp-coherent stages: a hoisting stage that precomputes shared parameters at tile level, a culling stage that discards warps with no contribution, and a blending stage that replaces per-pixel branching with a uniform instruction stream. Across extensive benchmarks on multiple datasets, Local-GS improves efficiency without compromising quality. As a plug-and-play optimization, it provides additional performance gains to all tested baselines, culminating in a $7.76\times$ speedup on Deep Blending scenes.

Long-tail hazardous scenarios are essential for safety-oriented autonomous driving, yet they are difficult to collect and reproduce at scale. Editable 3D Gaussian Splatting (3DGS) simulation offers a promising alternative by reconstructing real driving scenes and supporting controllable scene editing. However, edited 3DGS-rendered videos still suffer from a significant Sim-to-Real gap, including rendering artifacts, degraded foreground assets, inconsistent illumination, and temporal flickering. Existing restoration and video generation methods are insufficient for this task, as they often fail to jointly repair 3DGS-specific artifacts, improve visual realism, and ensure temporal consistency. To fill this gap, we propose RealityBridge, a structure-preserving and asset-aware Sim-to-Real framework for edited 3DGS driving videos. RealityBridge uses multimodal controls, including rendered videos, foreground masks, edge maps, and semantic masks, together with a lightweight GateNet for adaptive condition allocation across backbone layers. We further construct targeted training data and introduce autoregressive long-video training with reward-guided post-training to improve restoration quality, temporal stability, and hallucination suppression. Extensive experiments on internal and public driving datasets show that RealityBridge outperforms existing methods in artifact removal, illumination harmonization, and long-sequence temporal consistency.

Obstacle avoidance is essential for safe navigation and motion planning. Recent radiance field reconstruction methods enable object detection and modeling with high fidelity, but remain too memory- and compute-intensive for on-board perception-based path planning. To address these limitations, we propose PolyMerge to convert a large, photorealistic 3D Gaussian Splatting (3DGS) model of a scene into a lightweight representation of convex polytopes whose union provably over-approximates all obstacles in the original 3DGS model. PolyMerge tunes the polytope count to trade off conservativeness and compute cost, and integrates with control barrier functions (CBFs) to plan collision-free paths. We showcase PolyMerge in simulation and hardware experiments on a Crazyflie drone, which uses PolyMerge to compute and follow safe trajectories in real time under severe onboard compute constraints, outperforming baselines in speed while guaranteeing safety. For our code and videos, visit https://athlon76.github.io/PolyMerge-website/.

Consumer-level applications require fast optimization of 3D Gaussian Splatting (3DGS) with high-fidelity novel view rendering. However, existing 3DGS acceleration approaches still incur substantial computation on redundant pixels while sacrificing fine details. In this paper, we present TurboGS, an error-guided training framework that accelerates 3DGS by concentrating optimization on perceptually informative pixels. TurboGS is built upon four core components: (1) a tile-wise sparse pixel sampling, which, driven by multi-view reconstruction errors during training, prioritizes challenging regions and skips well-reconstructed ones to avoid redundant gradient computation; (2) a tile-wise structure-aware loss with sparse Normalized Cross-Correlation, which provides sparse yet effective supervision to preserve fine details and stabilize training; (3) an error-driven Gaussian density control strategy, which dynamically allocates model capacity and removes redundant primitives; and (4) a tailored hybrid optimizer that couples Hessian-informed updates with Adam moment damping to stabilize and improve convergence under sparse supervision. Experiments on standard benchmarks demonstrate that TurboGS can deliver on par or superior rendering quality within 100 seconds on a single RTX 5090 GPU card (up to 10x training speedup over vanilla 3DGS).

3D Gaussian Splatting (3DGS) has shown strong potential for high-fidelity talking head synthesis. However, enabling fine-grained, interpretable, and editable facial expression control remains fundamentally challenging due to intrinsic conflicts between speech-driven facial dynamics and explicit expression signals. Existing methods rely on implicit multimodal fusion, leading to spatial entanglement and temporal instability. We present EmoZone-Talker, a novel framework that reformulates audio-driven facial animation as a structured spatial-temporal coordination problem under cross-modal conflicts. Our approach introduces an explicit spatial disentanglement and temporal dynamics modeling of facial motion. Specifically, we propose Synergy Zones with Prioritized Attention Bias (SZ-PAB) to explicitly decouple modality contributions via region-wise constraints guided by anatomical priors, and a Channel-Independent Temporal AU Encoder (CIT-AE) to model temporally coherent AU dynamics. By integrating these representations into 3D Gaussian deformation, EmoZone-Talker enables precise and interpretable control over facial expressions. Extensive experiments demonstrate that our method improves expression controllability and realism, with notable gains in upper-face accuracy and temporal coherence, while preserving high rendering quality and accurate lip synchronization. Code will be publicly released to facilitate reproducibility and further research.

Low-light novel view synthesis is challenging because dark multi-view images contain noise, weak structural detail, and compressed dynamic range. Recent 3D Gaussian Splatting (3DGS) methods address these challenges by generating pseudo ground-truth (pseudo-GT) images as supervision targets when paired normal-light references are unavailable. Existing pseudo-GT methods apply a uniform linear gain to all pixels, which clips bright regions while providing insufficient enhancement in dark regions, limiting reconstruction quality. We observe that nonlinear tone mappings, long established in 2D low-light enhancement, have not been explored for pseudo-GT generation in 3D reconstruction. Accordingly, we propose a scene-adaptive nonlinear tone-curve framework that replaces linear pseudo-GT with nonlinear alternatives. The framework introduces percentile-based normalisation for scene-agnostic curve application, a scene-adaptive offset for automatic black-level adjustment, and two complementary curves: Adaptive SoftExp (ASE), a bounded exponential curve, and Adaptive Poly3 (AP3), a data-driven cubic polynomial. The module changes only the pseudo-GT computation and leaves the 3DGS backbone unchanged. Experiments on three benchmarks covering 21 scenes show that both curves consistently outperform the linear baseline with PSNR improvements up to +4.34 dB on LOM and +3.25 dB on RealX3D. Both curves achieve similar performance despite their different mathematical forms, suggesting the improvement is curve-agnostic. Code is available at https://github.com/lvmingzhe/adaptiveToneCurve

While 3D Gaussian Splatting (3DGS) achieves impressive real-time rendering, it frequently struggles to synthesize high-frequency textures, a limitation heavily exacerbated in memory-constrained and rate-distortion-optimized (RDO) pipelines. To address this, we propose a versatile 2D perceptual wrapper that enhances the rendered outputs of existing 3DGS representations in a content- and view-dependent manner. Our method leverages a lightweight synthesis network conditioned on pseudo-random Gaussian noise to synthesize perceptually plausible textures. Supervised by Wasserstein Distortion, the network learns to match local feature statistics rather than strictly enforcing pixel-wise reconstruction fidelity, effectively mitigating the blurriness inherent in standard frameworks. We demonstrate the broad applicability of our plug-and-play approach across vanilla, memory-constrained, and RDO 3DGS methods. Comprehensive subjective and objective experiments confirm that our method significantly improves over existing baselines, yielding superior perceptual quality at sharply reduced file or model sizes.

Reconstructing dynamic and interactive 3D scenes from real-world observations remains a fundamental challenge in computer vision and robotics. While recent advances in 3D Gaussian Splatting have enabled high-fidelity static reconstruction, extending it to interactive environments with articulated robots and manipulable objects remains difficult due to complex contact interactions and abrupt pose changes. To address these challenges, we introduce ManiSplat, a unified framework that reconstructs controllable and decoupled Gaussian digital twins directly from monocular ego-view robotic videos. Our method introduces a Graph-Structured Disentangled Representation that separates the robot, objects, and background into independently optimizable Gaussian subfields organized within a scene graph. To ensure stability, we propose a Task-Oriented Spatio-Temporal Alignment module that leverages the inherent logic of manipulation tasks-alternating between Motion and Skill phases-to construct accurate pseudo-ground-truth trajectories. Finally, a joint photometric-geometric optimization ensures the reconstructed scenes are temporally coherent, physically consistent, and simulation-ready. Extensive experiments demonstrate that our approach reconstructs interaction-driven dynamic scenes with high fidelity and controllability, effectively supporting downstream robotic tasks and policy learning.

3D Gaussian Splatting (3DGS) is a powerful technique for creating high-fidelity 3D assets. However, the widespread sharing and iterative modification of 3DGS models across digital platforms create pressing challenges for intellectual property protection and forensic traceability. To address this, we propose GaussTrace, a novel framework for constructing directed provenance graphs for 3DGS models. GaussTrace formulates provenance analysis as an evidence-based reasoning problem. It builds upon attribute-wise statistical profiling of 3DGS parameters to capture intrinsic properties. Moreover, we introduce hypothesis-driven editing simulations of common operations to provide auxiliary evidence for plausible transformation pathways. These statistical and simulated cues jointly enable a Large Language Model (LLM) to perform structured Chain-of-Thought (CoT) reasoning, yielding directional provenance inferences and explainable edge reasons. Experimental results demonstrate that GaussTrace effectively constructs evolutionary relationships among diverse 3DGS models, delivering accurate, interpretable, and robust provenance graphs without requiring model training or access to editing histories. Project page: https://haolianghan.github.io/GaussTrace.

Existing pruning methods for 3D Gaussian splatting (3DGS) suffer from either severe quality degradation or prohibitive computational overhead. In this paper, we propose REFINE, a highly accelerated 3DGS pruning framework centered on a novel rendering-free primitive importance metric. Our approach leverages an analytically approximated, rendering-aware Hessian field to quantify the expected perceptual error induced by the removal of individual primitives. By modeling the joint modulation of visibility, projection geometry and the content adaptive hyperparameter, we entirely bypass costly forward rendering passes and derive an anisotropic perceptual weight field that serves as a high-fidelity proxy for primitive importance. Extensive experiments across multiple benchmark datasets demonstrate that REFINE maintains highly competitive rendering quality while achieving a $3,000\times$ reduction in pruning-related computational complexity, translating to a practical $\sim 20\times$ speedup in device latency compared to state-of-the-art pruning methods.

Streaming 3D Gaussian Splatting requires highly scalable, progressive representations. Existing progressive methods rely on \textit{discrete layering}, accumulating separate splat sets for each level of detail. This structural independence between layers inherently leads to error accumulation, severe splat redundancy, and uncontrolled quality transitions. We propose EvoGS, the first \textit{continuous-layering} representation. Organized as an Evolution Tree, EvoGS generates finer details via an explicit, wavelet-inspired parent-child refinement. This empowers child nodes to structurally correct ancestral errors, yield inherently sparse and highly compressible inter-layer signals. Extensive experiments show EvoGS eliminates splat redundancy from over 65% to under 25%. Compared to state-of-the-art baselines, it reduces transmission payload and GPU VRAM footprint by up to 2.4$\times$ and 5.5$\times$, respectively, and achieves smooth quality transitions optimal for real-time adaptive streaming. Project page: https://yuang-ian.github.io/evogs/

Simulation is central to robot learning, yet the sim-to-real gap remains a major bottleneck. Existing approaches often tackle visual or dynamic gaps separately, overlooking how these individual mismatches accumulate and propagate throughout the robot's state evolution. In this paper, we introduce QuadVerse, an integrated framework that uses reconstructed scenes as a calibration substrate for aligning visual perception, physical interaction, and actuator dynamics. From captured RGB videos, we reconstruct geometry-constrained 3D Gaussian Splatting (3DGS) scenes that support batched photorealistic ego-view rendering and collision-ready semantic mesh extraction. The meshes further enable contact calibration by initializing spatially varying friction priors and refining them through trajectory-based posterior search. To address remaining actuator discrepancies, QuadVerse trains a residual dynamics compensator by replaying real-world trajectories on the contact-calibrated terrain, reducing the entanglement between terrain-induced contact errors and actuator non-idealities. Experiments show that QuadVerse improves reconstruction quality and locomotion tracking over relevant baselines. Leveraging this foundation, we demonstrate robust zero-shot visual-navigation policy deployment without task-specific real-world rollouts.

Deformable 3D Gaussian Splatting (D-3DGS) re-constructs dynamic scenes from monocular video by deforming a canonical set of 3D Gaussians through a positional-encoded MLP of frame time t. Although fitted to a continuous variable, the MLP couples no two values of t in its architecture and effectively predicts discrete per-frame offsets, leaving temporal smoothness to emerge only as a byproduct of optimisation. We redesign the deformation field as a stack of Closed-form Continuous-time (CfC) cells, a Liquid Neural Network (LNN), that is the closed-form solution of the Liquid Time-constant ODE while preserving every other part of the D-3DGS pipeline. Each cell exposes a sigmoidal time gate that interpolates between two candidate hidden states, baking a learned smooth response to t into the loss landscape without invoking any numerical solver. On the eight D-NeRF and seven NeRF-DS scenes the liquid field matches or exceeds the MLP baseline in aggregate, with its largest gains concentrated on the scenes with the most high-frequency articulated motion. The result is a near-zero-friction architectural design that turns the discrete MLP deformation field into an explicit continuous-time function of t.

Dynamic 3D Gaussian Splatting (3DGS) holds great promise as a 3D video streaming technology since it can represent complex 3D scenes with high fidelity. In this approach, every frame in a 3D video represents the environment as a collection of Gaussians with position and other attributes such as scale, rotation, opacity, and color. Frames capture fine details, permit views from any arbitrary perspective, but are an order of magnitude, or more, larger than 2D video frames. A line of recent work has explored how to compress dynamic 3DGS frames, but these approaches are often slow, in part because their compression techniques are not amenable to efficient acceleration. GS-NFS accelerates dynamic 3DGS compression and decompression on a GPU, to the point where it can encode and decode at full frame rate. It achieves this by developing novel GPU-based parallelizations of existing algorithms for encoding both positions and attributes of Gaussians. As a result, it is 1-2 orders of magnitude faster than the state-of-the-art in encoding and decoding a frame, while offering competitive compression performance and rendering quality.

After the success of 3D Gaussian Splatting (3DGS) for novel view synthesis, many works have explored how to also use it for geometric surface representation. However, extracting accurate geometric information directly from 3DGS remains challenging and can often reduce the appearance rendering quality. In this work, we show that 3DGS in its default form is inheritedly unsuited to represent texture and geometry at the same time, by training with complete ground-truth texture and geometry information. We also propose a simple solution by applying a single additional geometry opacity parameter to each splat, together with an optional transparency-curated optimization pipeline. Our experiments, both with ground-truth and vision foundation model geometric input, show that this change leads to improved rendering and geometry performance on a wide variety of dataset, and especially complex scenes with transparent objects benefit significantly from our method.

Multi-agent Next-Best-View (NBV) selection for safe path planning in uncertain and unknown environments requires informative, safety-aware, and efficient coordination. Centralized approaches rely on sharing raw sensor data or significant communication overhead, resulting in limited scalability. We propose a distributed, risk-aware multi-agent NBV framework in which each robot maintains a private local 3D Gaussian Splatting map and the team jointly maximizes expected information gain (EIG) restricted to masked zones along planned trajectories. The resulting distributed objective is solved by Consensus ADMM (C-ADMM) over a communication graph, with each robot exchanging only candidate viewpoints, planned trajectory descriptors, and scalar EIG contributions. Collision risk along each trajectory is modeled via Average Value-at-Risk (AV@R) over the local 3DGS map and used both to shape the masking radius and to score planned paths. Experiments in Gibson environments at multiple team sizes show that the distributed formulation approaches the centralized baseline in mapping quality and trajectory safety while reducing communication by orders of magnitude.

3D Gaussian Splatting (3DGS) has rapidly emerged as a leading representation for real-time novel view synthesis, but recent work shows it is vulnerable to diverse poisoning attacks, including illusory object injection, computation cost amplification, and post hoc model watermarking. Despite this expanding threat surface, existing studies focus mainly on attack success, while defense and detection remain underexplored. From a detection perspective, a key challenge and opportunity arise from the multi-stage nature of the 3DGS reconstruction pipeline, which produces heterogeneous intermediate representations. Forensic signals for detecting poisoning are inherently stage dependent: an attack introduced at one stage may produce signals that emerge only at later stages. This motivates a stage-wise view of detectability that goes beyond single-stage evaluation. We introduce Poison-3DGS, a benchmark for stage-wise characterization of poisoning detection in 3DGS. It exposes stage-specific artifacts, including multi-view images, geometry, training dynamics, and Gaussian parameters, across a diverse set of scenes and attacks. Using it, we conduct a systematic study of detectability across pipeline stages. Our analysis reveals several insights. First, detectability varies significantly across stages, and no single stage consistently dominates across attack types. Second, different attacks exhibit distinct stage-specific forensic signals, so detection effectiveness depends critically on where signals are observed. Third, later-stage signals such as training dynamics and Gaussian parameter statistics provide strong cues not observable at earlier stages. Overall, our work provides a principled benchmark and the first systematic characterization of stage-dependent detectability in 3DGS, offering a foundation for future research on robust and reliable 3DGS systems.

Dynamic 3D Gaussian Splatting (3DGS) methods reconstruct time-varying scenes from synchronized multi-camera video using photometric supervision. When a moving object becomes fully occluded from all training cameras, this supervision vanishes: the Gaussians representing it receive no gradient signal and degrade. Existing approaches to incomplete observations in neural reconstruction rely on learned generative priors that prioritize visual plausibility over physical correctness. We propose $\textbf{PersistGS}$, a method that restores object permanence during occlusion by coupling differentiable rigid body simulation with 3D Gaussian Splatting. Our approach decomposes the scene into per-object Gaussians and collision meshes, estimates friction and velocity from the observed pre-occlusion trajectory via differentiable simulation, and uses the resulting SE(3) trajectory to position object Gaussians throughout the occlusion period. Because the predicted trajectory satisfies the governing equations of rigid body dynamics, it faithfully captures contact events (bounces, friction-based deceleration, direction changes) that kinematic extrapolation cannot model. We introduce a centroid silhouette loss that isolates positional gradients from appearance noise, yielding 40% lower trajectory error than photometric supervision. We evaluate using cameras withheld from training that observe the object during its occlusion. Experiments on synthetic scenes show that PersistGS outperforms constant velocity extrapolation by +2.46dB PSNR and comes within 0.19dB of a ground-truth trajectory upper bound.

3D Gaussian Splatting (3DGS) enables real-time novel view synthesis by representing scenes as collections of anisotropic Gaussians optimized via differentiable rasterization. However, standard pixel-space losses (L1, SSIM) constrain only aggregate reconstruction error, permitting the optimization to redistribute error across frequency scales. This leads to oversmoothing and structural artifacts, particularly in sparse-view settings where supervision is limited. We propose KC-3DGS, which augments 3DGS training with wavelet-domain supervision based on natural image statistics. Our method combines three components: (1) a multi-scale wavelet coefficient alignment loss that explicitly penalizes missing high-frequency detail, (2) a supervised kurtosis concentration loss that encourages rendered images to match the heavy-tailed frequency statistics of ground-truth images, and (3) a cross-band covariance penalty that promotes frequency specialization. We provide theoretical analysis showing that pixel-space losses admit a family of indistinguishable perturbations under wavelet redistribution, and that our joint objective excludes degenerate solutions. Experiments across MipNeRF360, Tanks&Temples, MVImgNet, DeepBlending, and WRIVA-ULTRRA demonstrate consistent improvements in perceptual quality. On the challenging WRIVA-ULTRRA outdoor dataset, KC-3DGS achieves a 9.48% improvement in DreamSim while also improving PSNR, SSIM, and LPIPS. In sparse-view settings with only 12 training images, our method improves PSNR by up to 0.5 dB on MipNeRF360 while maintaining perceptual quality. The approach integrates seamlessly into existing 3DGS pipelines as a plug-and-play regularization strategy.

3D Gaussian Splatting (3DGS) achieves remarkable novel view synthesis quality with real-time rendering, yet suffers from excessive memory consumption due to millions of Gaussian primitives. Existing pruning methods rely on heuristic importance scores or synchronous batch updates, leading to suboptimal compression and training instability. We propose VEDAL, a principled framework that formulates Gaussian pruning as variational free energy minimization. Our approach introduces (1) a prediction-error gating mechanism that asynchronously activates pruning based on per-Gaussian reconstruction uncertainty, and (2) a variational uncertainty head that models pruning decisions as latent variables with learnable priors. The free energy objective naturally balances reconstruction fidelity against model complexity through an information-theoretic lens. Extensive experiments on Mip-NeRF 360, Tanks&Temples, and Deep Blending demonstrate that VEDAL achieves 5.2x compression with only 0.31 dB PSNR drop, outperforming PUP 3D-GS by +0.05 dB at a higher compression ratio and LightGaussian by +0.35 dB at comparable quality, while maintaining real-time rendering at 185 FPS.

World models enable intelligent agents to predict the consequences of their actions on the environment. In this paper, we propose Multi Rigid Object Gaussian World Model (MRO-GWM), a novel model that learns action-conditional dynamics of rigid objects in 3D. By representing the scene by object-centric Gaussians, we can represent arbitrary object shapes and multi-object scenes. We develop a novel spatio-temporal transformer architecture that predicts future rigid body motion from a history of object Gaussians and future actions. Objects are represented by their Gaussians in a canonical frame, which allows for describing object motion as rigid body transformation. Our model is trained on reconstructions from multiple viewpoints, which requires the model to handle partial observations of objects due to occlusions. We analyze prediction performance of our approach on synthetic datasets composed of typical household objects with multi-object dynamics and interactions by a robot end effector. We also evaluate our model in model-predictive control for non-prehensile manipulation in simulation.

Reconstructing a photorealistic 3D face avatar from a single unconstrained photograph is challenging: feed-forward 3D Gaussian Splatting (3DGS) models degrade on out-of-distribution inputs, while pretrained diffusion models produce high-fidelity images but lack multi-view consistency. We observe that these paradigms are fundamentally complementary: explicit 3D representations guarantee geometric consistency, whereas 2D diffusion priors ensure photorealism. Building on this, we propose SplatShot, a training-free framework that couples these representations directly within the denoising process. Given a base 3DGS face model and a single reference image, we jointly denoise all target views using a per-step 3D feedback loop. At each timestep, we predict clean images from the noisy latents, refit the 3DGS to these multi-view predictions, and back-propagate the photometric discrepancy between the 3DGS re-renderings and 2D predictions into the noise estimate. This steers the sampling trajectory toward strictly 3D-coherent, identity-faithful outputs. Experiments on diverse in-the-wild images demonstrate that SplatShot produces 3D avatars with superior identity preservation, photorealism, and multi-view consistency.

Dynamic scene reconstruction via 3D Gaussian Splatting (3DGS) has emerged as a compelling approach for representing evolving environments, yet understanding trade-offs between methodologies remains crucial. This paper presents a comprehensive analysis of dynamic 3DGS methods, categorizing them into two paradigms: structure-guided methods employing auxiliary representations (deformation fields, canonical spaces, grids) to model temporal changes, and gaussian-centric methods encoding dynamics directly into primitives via continuous functions or 4D representations. We evaluate representative methods from both paradigms on the D-NeRF benchmark. Our findings reveal that structure-guided methods achieve superior reconstruction fidelity and compact model sizes, while gaussian-centric approaches demonstrate significantly higher rendering speeds enabling real-time performance, though with greater quality variability and potentially substantial storage overhead. This analysis highlights a fundamental trade-off between reconstruction quality/compactness versus rendering speed, providing insights to guide future research and application development in dynamic scene reconstruction.

3D Gaussian Splatting (3DGS) is a technique for creating and rendering 3D scenes, however its performance depends heavily on the quality of initial seed points. To improve 3DGS initialization, this study presents and evaluates several point cloud upsampling approaches: linear interpolation, triangular interpolation, spline-based surface reconstruction, moving least squares surface fitting, and Voronoi-based point generation. Additionally, this research introduces a depth-guided point lifting method that leverages depth maps to maintain geometric consistency with Structure-from-Motion (SfM) reconstructions. Through extensive experiments on the Mip-NeRF360 and Replica datasets, the proposed methods demonstrate improvements in reconstruction quality across diverse scene types. Results indicate that different upsampling strategies excel in different scenarios: surface reconstruction methods perform better with organic, detailed scenes, while simpler interpolation approaches are more suited for scenes dominated by piecewise-smooth geometries. In comparison, the depth-guided approach shows promise for adding geometry-aware points across the entire scene, importantly in texture-less regions. These findings, which provide preliminary practical guidelines for selecting appropriate upsampling methods based on scene characteristics and computational constraints, advances the understanding of how point cloud initialization affects 3DGS quality.

3D Gaussian Splatting (3DGS) has become the standard for real-time novel view synthesis on commodity GPUs. Its pipeline ties spatial partitioning and rasterization to one tile size, yet the two pull in opposite directions: partitioning, which bins and depth-sorts gaussians, grows cheaper with larger tiles, while rasterization gets cheaper with smaller ones. Prior acceleration work reduces the cost of individual stages but keeps both locked to that single scale, where a few dense tiles dominate frame time. We present Hierarchically Tiled Gaussian Splatting (HiGS), which gives each its own scale: partitioning runs over coarse macro-tiles, while rasterization runs over the fine render tiles within them. Rasterization work is then issued in proportion to the gaussians in each macro-tile rather than per tile, so dense regions spread across many parallel units instead of serializing through one. Across tested scenes, HiGS renders up to 15.8x faster than the original 3DGS and outperforms every other rasterizer we evaluate, while preserving exact front-to-back alpha compositing.

Autonomous robots in unknown indoor environments require both reliable collision avoidance and object-level understanding. Classical representations such as TSDF support safe planning but lack semantics, while photorealistic methods like Gaussian Splatting (GS) provide rich appearance yet suffer from soft geometry, limiting precise obstacle avoidance. We present LiftNav, a hybrid navigation framework built on GSFusion's TSDF+GS dual map, augmented with a real-time pipeline of YOLO-based detection, TSDF-based 3D lifting, and B-spline trajectory optimization. This design enables flexible semantic navigation without dense 3D embeddings. We further introduce a hinge-loss-based collision penalty that improves trajectory smoothness and safety. We evaluate our approach in a simulation using the Replica dataset. Compared against a state-of-the-art radiance field baseline we show a 100% feasibility rate and shorter trajectories.

The tasks of object removal and inpainting 3D Gaussian Splatting (3DGS) scenes face challenges such as 3D consistency across camera views. In comparing 2D inpainters and their suitability for the 3D domain, we find that reconstruction-based inpainters outperform generative diffusion models in 3D consistency. Integrating these 2D inpainters into different single-step methods for creating and finetuning 3DGS scenes, our results indicate that initializing the scene from scratch produces higher quality results than finetuning the existing scene. Using a state-of-the-art generative 2D inpainter, we create a straightforward baseline to underline the importance of object removal before inpainting in the 3D setting. Since 360° datasets rarely include real-world ground truths, and challenging occlusion scenarios are equally sparse, we introduce a novel multi-object scene with recorded ground truth data and many views with object occlusions.

Dynamic scene reconstruction and novel view synthesis are fundamental to next-generation visual intelligence applications such as virtual reality, robotics, and digital twins. However, high-fidelity reconstruction of complex, time-varying scenes from arbitrary viewpoints remains a significant challenge. Existing dynamic 3DGS methods suffer from computational inefficiency, since they model all Gaussians as dynamic components. While recent decomposition-based approaches address this issue, they still struggle with degraded reconstruction quality and prolonged training time. To mitigate these limitations, we propose a novel dynamic reconstruction framework built upon an efficient static-dynamic decomposition strategy using a Feed-Forward Gaussian Splatting encoder and an optical flow model. By eliminating redundant computations on static regions, our method achieves state-of-the-art performance, outperforming existing baselines across rendering quality, training and rendering speed, and storage efficiency. Notably, on the Neural 3D dataset, our framework requires only 10 minutes for training and achieves a rendering speed of over 700 FPS on a single NVIDIA RTX 5090 GPU at resolution of 1352x1014. Furthermore, our decomposition strategy eliminates the need for COLMAP preprocessing and enables deterministic initialization, thereby enhancing both efficiency and reproducibility.

We present Gaussian Splatting Anisotropic Visibility Field (GAVIS), a novel framework for uncertainty quantification and active mapping in 3DGS. Our key insight is that regions unseen from the training views yield unreliable predictions from the 3DGS. To address this, we introduce a principled and efficient method for quantifying the visibility field in 3DGS, defined as the anisotropic visibility of each particle with respect to the training views, and represented using spherical harmonics. The resulting visibility field is integrated into a Bayesian Network-based uncertainty-aware 3DGS rasterizer, enabling real-time (200 FPS) uncertainty quantification for synthesized views. Active mapping is further performed within a maximum information gain framework building on this formulation. Extensive experiments across diverse environments demonstrate that GAVIS consistently and significantly outperforms prior approaches in both accuracy and efficiency. Moreover, beyond standalone use, our method can be applied post-hoc to improve the performance of existing approaches.

Efficient and robust 3D scene representation is crucial in autonomous driving, robotics, and related fields. While RGB images provide valuable content for 3D reconstruction, other modalities like thermal or depth can enable additional information on the environment. Lately, novel view synthesis methods like 3D Gaussian Splatting have started using multiple modalities to further boost their performance. But fusing or combining multimodal data can make the process slower and can bring in additional challenges. Therefore, our project aims to use single modality based on thermal infrared domain, by removing the reliance on visible light as much as possible. This single modality can be expected to be faster as it does not rely on multimodal data. We propose a method, Thermal-to-Depth Gaussian Splatting (TDg), that uses only thermal images and depth estimation in its architecture to derive the radiance fields. Our TDg method outperforms the MSMG (Multiple Single-Modal Gaussians) baseline in most cases on our test datasets, RGBT-Scenes and ThermalMix. On average, the rendering quality metrics such as learned perceptual image patch similarity (LPIPS), structural similarity index measure (SSIM), and peak signal-to-noise ratio (PSNR) of TDg are 1.12%, 0.034%, and 0.01% better than the baseline MSMG values. It also reduces the training time significantly, by 12 mins 47 secs (55% improvement). Overall, our method is successful in deriving these thermal radiance fields, which can ultimately have several applications, such as identifying heat sources critical in surveillance, search or rescue operations, and industrial inspections where temperature is widely used to monitor machines.