Overview

Adaptive control studies how controllers can estimate changing system dynamics or disturbances and adjust actions during operation, rather than relying on a fixed model. Common approaches include recursive least squares and disturbance observers, neural or Gaussian-process residual models, gain scheduling, and reinforcement-learning or meta-learned policies, often combined with model-predictive control, iterative learning, and Lyapunov or control-barrier safety filters. Work spans manipulators, quadrotors, autonomous vehicles, spacecraft, soft robots, and human-robot systems, tested in simulation and hardware under payload changes, friction, wind, actuator faults, contact, and distribution shifts. A central challenge is balancing fast, efficient adaptation against stability, constraint satisfaction, limited safe exploration, and robustness when learned models or policies are wrong.

Latest papers

157 papers15 papers in the last four weeks, down 35% on the four weeks before. 0.1% of all new papers.

Feb 18, 2026

SIT-LMPC: Safe Information-Theoretic Learning Model Predictive Control for Iterative Tasks

Robots executing iterative tasks in complex, uncertain environments require control strategies that balance robustness, safety, and high performance. This paper introduces a safe information-theoretic learning model predictive control (SIT-LMPC) algorithm for iterative tasks. Specifically, we design an iterative control framework based on an information-theoretic model predictive control algorithm to address a constrained infinite-horizon optimal control problem for discrete-time nonlinear stochastic systems. An adaptive penalty method is developed to ensure safety while balancing optimality. Trajectories from previous iterations are utilized to learn a value function using normalizing flows, which enables richer uncertainty modeling compared to Gaussian priors. SIT-LMPC is designed for highly parallel execution on graphics processing units, allowing efficient real-time optimization. Benchmark simulations and hardware experiments demonstrate that SIT-LMPC iteratively improves system performance while robustly satisfying system constraints.
Feb 17, 2026

Spatially-Aware Adaptive Trajectory Optimization with Controller-Guided Feedback for Autonomous Racing

We present a closed-loop framework for autonomous raceline optimization that combines NURBS-based trajectory representation, CMA-ES global trajectory optimization, and controller-guided spatial feedback. Instead of treating tracking errors as transient disturbances, our method exploits them as informative signals of local track characteristics via a Kalman-inspired spatial update. This enables the construction of an adaptive, acceleration-based constraint map that iteratively refines trajectories toward near-optimal performance under spatially varying track and vehicle behavior. In simulation, our approach achieves a 17.38% lap time reduction compared to a controller parametrized with maximum static acceleration. On real hardware, tested with different tire compounds ranging from high to low friction, we obtain a 7.60% lap time improvement without explicitly parametrizing friction. This demonstrates robustness to changing grip conditions in real-world scenarios.
Oct 27, 2025

TARC: Time-Adaptive Robotic Control

Most robotic systems rely on fixed-frequency discrete-time controllers, creating a trade-off between the efficiency of low-frequency control and the responsiveness of high-frequency feedback. As a result, systems typically default to high control rates for robustness, at the cost of wasted inference and unnecessary actuation. Addressing this, we introduce Time-Adaptive Robotic Control (TARC), a reinforcement learning framework in which the policy jointly predicts a control action and its duration of application. TARC learns temporally extended actions by optimizing task performance under soft or hard constraints on the number of control switches, enabling adaptive modulation of control rates. We evaluate TARC on two robotic hardware platforms: a high-speed RC car and the Unitree Go1 quadruped, and on a vision-language action model in simulation, where each query incurs a costly transformer forward pass. Across all settings, TARC matches the performance of high-frequency discrete-time controllers while operating at less than half their control frequency. Unlike fixed-rate controllers, TARC adapts its control frequency online, allocating high-frequency feedback only when required.
Oct 23, 2025

Learning On The Job: Zero-Shot Task Execution under Parametric Uncertainty via Trajectory-Parametrized Dual Control

Model-based control can achieve reliable task performance, but its effectiveness depends on the accuracy of the underlying model. Robots operating under model uncertainty must often adapt to previously unseen payloads, objects, and interaction dynamics to complete a task successfully. Conventional approaches typically rely on a dedicated task- and control-agnostic excitation phase for estimating physics parameters, delaying task execution and collecting potentially irrelevant data. In this paper, we instead consider zero-shot task execution under parametric uncertainty, where online model learning and control proceed concurrently during task execution. Our approach formulates reference generation within a dual control framework to produce task-relevant, informative trajectories that reduce parameter uncertainty in directions critical to task success. We predefine a feedback policy with an explicit parameter adaptation law and optimize the reference through the resulting adaptive closed-loop dynamics. We propose two formulations: 1) minimizing expected task cost under parameter uncertainty, and 2) minimizing optimality loss, which quantifies the degradation in task performance caused by planning with an incorrect parameter estimate. By actively optimizing for informative trajectories via a natural Fisher information measure, we tightly approach a lower bound on task-relevant parameter uncertainty while simultaneously achieving reliable task execution. Across diverse tasks, controllers, and adaptation laws, targeted exploration enables the identification required for successful task execution, allowing robots to learn relevant physical parameters while completing the task in a single attempt.
Aug 8, 2025

All-Electric Heavy-Duty Robotic Manipulator: Surrogate-Enhanced Modeling and Adaptive Modular Control

This paper presents a unified system-level modeling and control framework for an all-electric heavy-duty robotic manipulator (HDRM) driven by electromechanical linear actuators (EMLAs). A surrogate-enhanced actuator model, combining integrated electromechanical dynamics with a neural network trained on a dedicated testbed, is integrated into an extended virtual decomposition control (VDC) architecture augmented by a natural adaptation law. The derived analytical HDRM model supports a hierarchical control structure that seamlessly maps high-level force and velocity objectives to real-time actuator commands, accompanied by a Lyapunov-based stability proof. In multi-domain simulations of both cubic and a custom planar triangular trajectory, the proposed adaptive modular controller achieves sub-centimeter Cartesian tracking accuracy. Experimental validation of the same 1-DoF platform under realistic load emulation confirms the efficacy of the proposed control strategy. These findings demonstrate that a surrogate-enhanced EMLA model embedded in the VDC approach can enable modular, real-time control of an all-electric HDRM, supporting its deployment in next-generation mobile working machines.
Jul 6, 2025

Action-Increment-Constrained Policy Optimization for Smooth Online Adaptive Critic Flight Control with Actuator Rate Constraints and Low Computational Complexity (extended version with Ultimate Uniform Boundedness analysis)

Approximate Dynamic Programming (ADP) enables online control-law adaptation through adaptive critic methods. A safety challenge in applying ADP to angle-of-attack (AoA) tracking control is that an overly sensitive neural network (NN) controller may generate oscillatory or saturated control actions under nonlinear dynamics, potentially compromising flight stability and increasing actuator stress. To address this challenge, this paper proposes two innovations: (1) the actuator rate constraints are enforced within a an Action-Increment-Constrained Policy Optimization (AI-CPO) framework inspired by safe reinforcement learning (RL), in which a primal-dual approach adaptively adjusts the penalty weight to address actuator rate constraints. This optimization is solved online using adaptive Temporally Smoothed Incremental Model-Based Heuristic Dynamic Programming (TS-IHDP) for smooth and computationally efficient online adaptive control; and (2) a low-pass filter integrated into the cascaded NN architecture to attenuate high-frequency pitch-rate commands while preserving the Markov property during online learning by exploiting the hierarchical actor structure. Compared with the IHDP baseline, simulations using a longitudinal air vehicle dynamics model demonstrate that TS-IHDP improves control smoothness and tracking performance, reduces system oscillations, and enhances the trained policy's robustness to model uncertainties.
Jun 10, 2025

Differentiable Physics-Informed Adaptive Koopman Control for Stable Flight under Unknown Disturbances

Uncertainties and disturbances in robotic systems, such as aerodynamic forces, are fundamentally outcomes of physical interactions with the environment, manifesting as learnable spatiotemporal sequences rather than random noise. However, achieving high-precision control for robotic systems operating in unstructured environments is often hindered by complex unmodeled dynamics and external disturbances. While learning-based methods offer powerful approximation capabilities, they typically suffer from heavy reliance on offline training and lack theoretical guarantees. Conversely, traditional robust control strategies are predominantly reactive, limited to instantaneous estimation without the foresight to anticipate future disturbance trends. To bridge this gap, this paper proposes a differentiable data-enabled Koopman control framework termed DEKC. Unlike black-box approaches, DEKC adopts a hybrid modeling strategy that retains the nominal physics model while employing a deep neural network to parameterize the lifting function of Koopman operator for unknown residual dynamics. Crucially, the framework formulates disturbances as a dynamical system, learning their temporal evolution in a global linear space. This enables the prediction of future disturbance trajectories, which are explicitly integrated into controller for preemptive compensation. Furthermore, an online backward gradient update mechanism is introduced to ensure real-time adaptation to time-varying uncertainties. Numerical simulations on a tethered space robot demonstrate the efficacy of the proposed DEKC in mitigating highly coupled uncertainties. Complementing these results, real-world experiments on a quadrotor substantiate its superiority in tracking agile trajectories under uncertainties induced by aerodynamics and suspended payload.
Mar 19, 2025

Learning-based Adaptive Safety-Critical Control With Evolving Unsafe Regions

Control barrier functions (CBFs) provide a principled framework for safety-critical control, but their construction typically requires an explicit and differentiable description of the safe or unsafe region. It becomes challenging for data-defined unsafe regions that may evolve over time. This paper proposes SafeLink, a data-driven CBF construction and adaptation method based on a cost-sensitive random vector functional link (RVFL) network. SafeLink introduces asymmetric misclassification costs to promote conservative unsafe-region representation while preserving a closed-form solution. We establish the Lipschitz continuity of the learned CBF and its derivatives, and derive sufficient conditions for conservative unsafe-region coverage and the corresponding interval-wise safety guarantees. Analytical updates are further developed for adjusting the misclassification cost and for incrementally adding or decrementally removing samples, avoiding full retraining when the unsafe region changes. Experiments on a two-link manipulator demonstrate that SafeLink rapidly adapts to evolving unsafe regions, enables collision-free target reaching, and achieves substantially lower update runtimes than baselines.
Mar 18, 2025

Learning-Based Progressive Barrier Control for Robot Manipulators with Initial Errors Outside Prescribed Tracking Bounds

Robot manipulators may start a new task with a tracking error larger than the prescribed tolerance. Conventional barrier controllers generally require the initial error to lie within this tolerance, which prevents their direct use under such conditions. This paper develops a progressive barrier controller that gradually contracts an initial error bound to the required value within a prescribed time. The robot can therefore start outside the final bound, while the direct joint-position error satisfies it after the transition. The closed-form control law combines progressive barrier feedback with an online adaptive torque term based on an actor--critic structure. A Lyapunov analysis establishes bounded closed-loop signals and gives sufficient conditions for satisfaction of the final tracking bound. Two-link simulations consider large initial errors, actuator saturation, dynamic variations, disturbances, and measurement errors. The adaptive term reduces the median root-mean-square tracking error by 45.1% compared with the zero-weight progressive barrier controller. The simulations also map the initial errors that can be handled at different transition times under fixed torque limits. Finally, an experiment on a Niryo Ned3 Pro illustrates tracking performance using measured position and motor-current data.