And Mixed-Signal Circuits

Artificial neural networks rely on vector-matrix multiplications (VMMs), whose implementation in von Neumann architectures is dominated by costly data movement between memory and processing units. Spiking neural networks (SNNs) mitigate this bottleneck by performing in-memory, analog VMMs using memristive crossbar arrays. However, conventional current-mode readout circuits incur significant area and power overhead. This work proposes a fully analog readout architecture based on voltage-to-time conversion of the VMM output. By sensing the column voltage, the proposed approach avoids current-mode summing and scaling circuitry, improving area and energy efficiency. Post-layout simulations of a 10x1 SNN implemented in a 130 nm CMOS technology validate the proposed architecture, while application to a trained 64x10 SNN for digit classification further demonstrates its feasibility for SNN inference.

As integrated circuit technology scales into the nanometer regime, the traditional disconnect between logic synthesis and physical design has led to significant PPA (Power, Performance, and Area) degradation and prolonged design closure cycles. Traditional logic synthesis relies on non-physical Wire Load Models (WLMs), while recent spectral-based placement predictors often neglect the inherent hierarchical logic depth and signal flow of netlists, which leads to low-fidelity spatial estimations. To bridge this gap, we propose LevelSyn, a novel physical-aware logic synthesis framework that integrates hierarchical representation learning with a wirelength-driven optimization engine. At its core, LevelSyn leverages a level-asynchronous Graph Neural Network (GNN) to predict high-fidelity gate coordinates by capturing the structural and directional semantics of And-Inverter Graphs (AIGs). To handle industrial-scale designs, a level-aligned subgraph partitioning strategy is introduced to eliminate memory bottlenecks while preserving local logical dependencies. These spatial insights are seamlessly integrated into a newly developed physical-informed synthesis engine within the Berkeley ABC framework. Experimental results on the EPFL benchmark suite demonstrate that LevelSyn significantly outperforms state-of-the-art (SOTA) methods, achieving an average power reduction of 6.89% and a timing delay improvement of 27.48%. Furthermore, post-place-and-route validation shows a 99.59% reduction in design rule check (DRC) violations, highlighting its effectiveness in accelerating design convergence.

Emerging edge AI workloads increasingly require arithmetic units that can trade computational accuracy for efficiency on demand. However, existing approximate arithmetic circuits are typically fixed-accuracy or rely on predefined structures for runtime configurability. This work introduces CircuitsDNA, an evolutionary framework that automatically evolves accuracy-configurable arithmetic circuits supporting multiple accuracy modes within a single circuit. It integrates three key features: 1) multi-threshold verifiability miter to enforce mode-specific accuracy requirements, 2) resource-limited verifiability-driven search to reduce verification overhead without sacrificing correctness, enabling efficient exploration of large circuit design, and 3) feedback-driven adaptive mutation to prioritize effective structural modifications and accelerate search convergence. Experimental results show that the 8-bit multiplier variants synthesized in 28-nm CMOS reduce the area-power product by up to 56% on INT8 DNN workload and 93% under exhaustive activity, compared with an exact 8-bit multiplier. Across CNNs and DeiTs, the accuracy loss relative to FP32 remains below 2% after fine-tuning under worst-case error (WCE) budgets of at most 1%. CircuitsDNA eliminates all search stalls observed in conventional methods across 8/12/16-bit multipliers, while adaptive mutation provides up to 1.33 times faster convergence than its non-adaptive counterpart.

Sharing analog integrated circuit designs remains difficult: foundry non-disclosure agreements restrict the process details a design depends on, and the testbenches behind published results are rarely released. We present analog-db, an open-source, versioned database built on a shareable design representation. A domain-specific language captures each design as a process-neutral topology, reusable testbenches, and a machine-readable datasheet under one schema, so a design is shared in full and re-simulates on the process kits it is bound to. A parameterization scheme exposes functional sub-blocks and device sizes as named parameters that carry their matching constraints, making circuits composable and retargetable; a schema-governed contract and queryable catalog let AI design agents discover and reuse them directly. Across the regulator corpus, all 23 circuit-kit bindings on three open kits meet their own recorded specification bands (typical corner, matched devices, no layout) and 10 of 23 meet a common class band. Seventeen of the 23 imported sizings failed their testbenches and closed under a gm/ID sizing loop driven by the annotated sub-block roles, typically within one to three iterations. In a supervised case study, a coding agent working from the released artifacts sized the op-amp cores of a chopper instrumentation amplifier on an open 130nm kit, locating four hand-entry defects and a missing common-mode feedback loop that the sizing-only baseline did not repair. The database holds 68 circuits across sixteen classes, verifiable at schematic level under a tiered harness and tracked on a power/performance scoreboard, released at https://github.com/MacAnalog/spicexplorer-release.

Large Language Models (LLMs) are increasingly used in circuit design workflows, yet their reliability on simulator-facing SPICE netlist recognition and manipulation remains poorly understood and is rarely separated from high-level design reasoning. Although netlists are textual, they encode structured circuit objects through topology and parameters. We present \textbf{NetlistBench}, a structure-verified benchmark for SPICE netlist recognition and manipulation. NetlistBench contains 2,342 cases across 24 task families, covering parameter and connectivity recognition and edits, hierarchical operations, equivalence judgment, and long-horizon compound editing. Model outputs are evaluated by a deterministic structure-aware oracle. Across six non-thinking LLMs, performance varies substantially with operation-level structural complexity. Simple local edits reach $96\%$--$100\%$ accuracy, while device addition drops to $41\%$--$83\%$ and equivalence judgment to $49\%$--$90\%$. Enabling reasoning substantially improves weaker models but does not eliminate structure-preservation failures, with performance still degrading sharply as the edit horizon increases. NetlistBench identifies netlist reliability as a distinct bottleneck for trustworthy LLM-based circuit design automation.

As Moore's law slows, the industry is turning to three-dimensional integration; yet in merged 3D-IC flows, routed designs expose bond-level defects with no 2D analogue, and post-route engineering change orders (ECO) remain manual, expertise-bound work. Worse, the standard edit-then-fully-reroute practice entangles a repair with router churn, so a signoff number cannot be attributed to the edit that motivated it. We present AgenticECO, an evidence-gated tool-using agent workflow for 3D-IC ECO on the open-source TaiWei flow, paired with EcoRoute, a minimal-disturbance ECO-routing layer that drives the unmodified pinned router so a repair is attributable to its edit. Across nine matched natural defect cases under identical budgets, AgenticECO clears seven versus two for both full reroute and stock repair, at 0.66% mean disturbance over cleared cases and zero clock nets touched, and a cross-backbone rerun under the same sealed contract clears all nine. Controlled studies show that the repair moves are necessary under preservation, that occupancy-aware choice buys legal landings rather than repair success, and that under tightened clocks minimal disturbance flips accept versus reject. Three preregistered visual studies localize the pixel instrument's edge to contested landing sites, and a preregistered blind diagnostic exactly restores every held-out injected defect, the only arm with zero wrong edits. Every accepted result passes routing, fresh extraction, max/min timing, DRC, and structural-equivalence gates. Code, environment, and per-episode audit artifacts are released as supplementary material.

This project aimed to develop a novel reservoir compute (RC) implementation framework targeting high-speed operation and integration with CMOS digital logic. With the target workload of branch prediction (BP) for multistage pipelined central pro-cessing unit (CPU) cores. For this, a novel memristor based RC design framework was developed within the context of the workload requirements. This was then implemented in simulation using industry standard modelling languages of System Verilog (SV) and Verilog-AMS (VAMS).The developed RC design framework was subsequently verified using a basic sequence detection task before further benchmarking for its effectiveness at BP. The developed RC framework was tested using the Dhrystone performance benchmark, while targeting the RISC-V RV64GC instruction set architecture (ISA). Conducted testing demonstrates that RC shows great promise for ap-plication to BP and is capable of achieving impressive overall prediction accuracy. However, testing also shows that further refinement of the developed RC design framework is necessary to address shortfalls in the adaptability of the proposed RC system. As comparison against the state of the art TAGE predictor showed the proposed RC design framework to be 15x slower to adapt to changes in branching behaviour.

As chip manufacturing processes advance to deep submicron nodes, parasitic interconnect effects increasingly dominate the performance of analog and mixed-signal (AMS) circuits and often lead to costly layout iterations. This makes early-stage estimation of parasitic capacitance and resistance important for parasitic-aware design exploration before full physical implementation. However, progress on GNN-based parasitic modeling has been hindered by the lack of public, high-fidelity RC benchmarks that support reproducible evaluation. To address this gap, we introduce ParasGB, the first open-source benchmark suite for pre-layout parasitic parameter prediction on circuit graphs. ParasGB provides large-scale, heterogeneous RC networks extracted with commercial EDA tools from tape-out-proven designs, together with a unified evaluation protocol covering node-level ground capacitance, edge-level resistance, and edge-level coupling capacitance. Within this framework, we benchmark diverse GNN architectures using a standardized training pipeline and expose challenges such as extreme label imbalance, long-tailed parasitic distributions, and strong structural heterogeneity. By establishing a physically grounded and standardized benchmark for early-stage parasitic prediction, ParasGB provides an open platform for reproducible research on circuit graph learning and parasitic-aware model development. All datasets, preprocessing scripts, and configurations are publicly available in our code repository https://github.com/ShenShan123/ParasGB.git.

Large language models (LLMs) have driven rapid progress in electronic design automation (EDA), yet their application to radio-frequency (RF) circuit design remains limited by the scarcity of domain-specific datasets and standardized benchmarks. We present RF-Agent, which addresses this gap through textbook-driven knowledge distillation. A multi-agent Question-Thinking-Solution-Answer (QTSA) pipeline converts a subsection-level corpus from seven canonical RF textbooks into the first-of-its-kind RF-domain reasoning dataset (over 11,000 samples) with a dedicated multiple-choice benchmark. On this benchmark we study two adaptation strategies: supervised fine-tuning (SFT) and three retrieval-augmented generation (RAG) configurations (semantic, keyword, hybrid). Across multiple LLM families, domain-specific SFT significantly improves RF reasoning, especially for small and medium-sized models; among RAG configurations, semantic retrieval performs best, indicating embedding-based context alignment suits RF reasoning better than naive fusion. The dataset and benchmark provide a reusable foundation for future work on LLM-aided RF circuit design.

Low-power event-based Analog Front-Ends (AFEs) are essential for building efficient, end-to-end neuromorphic signal processing systems. In this paper, we present an event-based AFE Application-Specific Integrated Circuit (ASIC) optimized for biomedical signal acquisition and encoding. The chip features 32 independently programmable input channels with dual-mode encoding mechanism outputs, comprising Pulse Frequency Modulation (PFM) and adaptive Asynchronous Delta Modulator (aADM) circuits. The aADM encoder provides an auto-scaling mechanism that adapts the encoding data-rate based on the input signal envelope in real-time, enabling very high data compression for low-power information transmission. This approach paves the way toward adaptive wireless communication of neural signals for on-line processing in brain-computer interfaces. Fabricated in a 180 nm CMOS process, the proposed ASIC offers a highly configurable interface compatible with state-of-the-art Spiking Neural Network (SNN) neuromorphic processors.

As CMOS technology scales into the deep nanometer regime, digital circuit reliability is increasingly threatened by the combined stochastic effects of Bias Temperature Instability (BTI) and Process Variation (PV). Traditional reliability analysis methods, which rely on computationally intensive simulations or extensive lookup tables, fail to scale efficiently for large designs, creating a critical bottleneck in design space exploration. To address this, we propose SMART, a novel framework that integrates Machine Learning (ML) with Monte Carlo simulation to enable rapid, high-fidelity reliability analysis. SMART employs Random Forest regression to predict gate delay distributions directly, bypassing time-consuming atomic model parameter extractions. Crucially, the model utilizes Bayesian Optimization for automated hyperparameter tuning, ensuring maximum predictive robustness across diverse libraries. Experimental validation on ISCAS85 benchmark circuits demonstrates that SMART achieves a 94.54% reduction in analysis time compared to state-of-the-art methods, while maintaining a remarkable average accuracy error of just 1.63%. By shifting computational complexity to an offline training phase, the proposed framework offers a scalable, accurate solution for designing resilient, reliability-aware digital systems.

Stochastic spiking neurons trade exact arithmetic for controlled randomness, lowering area and tolerating input noise, which suits event-driven edge hardware. We present a compact, configurable stochastic leaky integrate-and-fire neuron in standard-cell CMOS on the SkyWater 130 nm process, released openly. A 16-bit configurable-polynomial linear-feedback shift register drives an eight-entry programmable activation table that sets a Bernoulli firing probability, and a saturating 16-bit leaky integrator with a programmable threshold and a refractory period of zero to seven cycles produces the spike train. All parameters are set through a sixteen-register serial interface, and the neuron runs from parallel inputs or entirely from the register file. From a model checked bit-exact against the register-transfer code, the period is 65535 states for a maximal-length polynomial and 63 for the shipped default, the eight-bit comparison value is uniform over the full period, and the per-entry firing probability equals the table value divided by 256. We also characterise a property a system-level model would not expose: the comparator output is serially correlated at short lags, with a negative lobe near lag eight, because the compared byte shifts by one bit each cycle; subsampling every sixteen cycles restores whiteness. Rate-coding sweeps show monotonic control of the output rate by the input weight and the threshold, and the refractory period caps the rate at one spike per refractory-plus-one cycles. The neuron occupies about 10,600 square micrometres at 70 per cent utilisation on a single Tiny Tapeout tile, meets 50 MHz timing with positive margin, and passes eighteen directed cocotb tests at register-transfer and gate level. All results are pre-silicon, from simulation and the open flow. The neuron is an openly released companion to a four-block neuromorphic suite reported separately.

Edge neuromorphic systems need compact, configurable hardware that combines probabilistic inference, local learning, and an interface to emerging analogue memory. We present four interface-compatible digital IP blocks implemented as standard-cell CMOS on the SkyWater 130 nm process: a process, voltage and temperature (PVT) sensor built from five selectable ring oscillators that also provides a jitter-based true-random-number generator and a frequency-bounds health monitor; a stochastic leaky integrate-and-fire (LIF) neuron with a configurable LFSR, a programmable activation table, and a refractory period; an on-chip spike-timing-dependent plasticity (STDP) controller with a programmable curve and reward-modulated, eligibility-trace, and anti-Hebbian modes; and a memristive-crossbar controller supporting forming, set, reset, read, and automated current-voltage sweep with current-compliance limiting and half-select biasing. All four blocks share a common serial peripheral interface (SPI) register file; the sensor also exposes a parallel readout. Each occupies a single tile at a 50 MHz target. The suite was verified with 99 cocotb tests at register-transfer and gate level (all passing) and taken through an open standard-cell flow, then submitted for tapeout via the Tiny Tapeout shared-silicon programme. Mapped to the open cell library, each block occupies a post-synthesis cell area of 9.3 to 10.6 thousand square micrometres, places at 61 to 70 per cent tile utilisation, meets the 50 MHz constraint with positive setup and hold margin after clock-tree synthesis, and draws an estimated 0.64 to 0.70 mW under a default switching-activity assumption. The contribution is a coherent, openly released set of building blocks unified by one register interface and one verification flow. All results are from simulation and the implementation flow; no fabricated silicon is reported.

Failure analysis is being reshaped by heterogeneous integration, chiplet-based architectures, hybrid bonding, backside technologies, & increasingly buried package structures. To examine how practitioners view this transition, an anonymous survey was distributed across a broad set of organizations involved in semiconductor design, packaging, systems, tools, & failure analysis. The survey collected approximately one hundred responses & probed organizational background, supported product domains, future priorities in failure analysis, critical bottlenecks, sample preparation challenges, emerging architecture specific pain points, & perceived needs for workflow acceleration & data standardization. The results show that heterogeneous integration, chiplet, and three-dimensional products dominate the respondent base at 69%, while package & heterogeneous integration failure analysis received the highest importance rating at 7.92 out of 10. Hybrid bonding emerged as the most difficult new architecture to analyze at 54%, higher-resolution non-destructive imaging ranked as the most important future accelerator at 8.18 out of 10, and 83% of respondents supported formalized data standardization frameworks. The complete survey data are provided in Appendix A (Table II) to improve transparency & support future benchmarking.

Non-verbal vocalizations (NVs), such as laughter, sighs, and coughs, are important acoustic cues for emotion and intent. Existing speech quality assessment methods typically focus on overall naturalness, while non-verbal TTS evaluations mainly examine whether a target NV appears with the correct type and position. However, the perceptual quality of NV events themselves remains underexplored. To address this gap, we construct an NV-MOS dataset containing outputs from multiple NV-TTS systems and naturally occurring NV samples, with ratings collected from three acoustic experts on a perceptual quality scale. We further analyze audio-capable multimodal large language models such as Gemini and find clear inconsistencies between their scores and expert ratings. These results suggest that general-purpose multimodal models cannot reliably replace human judgments for NV quality assessment. We then propose NVMOS, to our knowledge the first model that can reliably predict the perceptual quality of NV events in speech. Experimental results show that, with a local NV-event focusing module, NVMOS reaches expert-level or stronger agreement with human MOS.

Generative artificial intelligence (GenAI) is increasingly used for applications in the hardware and software domains. It purports to reduce the manual effort involved in the development and testing of complex systems before release. Within the hardware space, most tasks have focused on design automation of integrated circuits, particularly with hardware description languages. However, other types of hardware also exist! In this survey, we instead examine how GenAI has been and is being across the printed circuit board (PCB) design life cycle. This includes everything from supply chains, system specification, circuit design, layout and optimisation, validation and test, and PCB assembly and distribution. Through this lens we present a taxonomy of discovered works, categorising them according to their intent and contributions. This survey also identifies key technical challenges that GenAI faces in this space, such as domain-specific data scarcity and limited support for integration with existing PCB tools. Finally, future research directions are discussed: our survey shows that there are many opportunities remaining when considering how GenAI may be integrated into various tasks in PCB design and test.

This paper proposes a co-optimization framework that jointly optimizes SRAM architecture and transistor sizing using equivalent circuit models. The framework simplifies inactive SRAM cells into equivalent RC loads and static power models, achieving up to 61.4$\times$ simulation speedup while maintaining high fidelity (read/write delay error $<$0.22%, power error $<$1.68%). A joint search space encompassing architecture parameters and device sizing integrates seven algorithms including SA, PSO, Bayesian Optimization variants, and multi-objective evolutionary algorithms. Based on FreePDK45, ablation experiments confirm complementary gains from architecture selection and transistor sizing. Among all algorithms, MOEA/D achieves the best Figure of Merit (8.2721), yielding 6.2% improvement in SNM, 73.6% reduction in area, and 42.3% reduction in peak power. The framework is publicly available at https://github.com/W1Y1K1/OpenOpt.

Deep neural networks (DNNs) are used in a variety of real-world applications including, for example, image classification and speech recognition. The inference accuracy of DNN implemented on hardware in integrated circuits (ICs) degrades under phenomena such as transistor aging. Aging slows down the switching speed of transistors, resulting in system-level timing violations due to unsustainable clocks. To maintain reliability for the entire projected lifetime, designers add guardbands to prevent timing violations; however, adding large timing guardbands causes losses in performance (speed or throughput). This chapter provides a detailed discussion of the effects of long-term and short-term transistor aging on DNN inference accuracy. Furthermore, to mitigate aging effects on DNN's accuracy and keep them at bay, a methodology for aging-aware retraining is presented in order to generate a resilient DNN even when aggressive (i.e., smaller than required) guardbands are used. This improves the inference accuracy of the DNNs even in the presence of aging-induced degradation. These effects are discussed in this chapter along with mitigation strategies on a hardware implementation of a DNN for image classification on an off-the-shelf image dataset. The application of short-term aging as an excitation mechanism for the detection of hardware Trojans in integrated circuits is also briefly discussed.

Signal integrity (SI) analysis in printed circuit board (PCB) interconnects faces increasing complexity due to diverse integrated circuit (IC) buffer technologies, varying operating conditions, and manufacturing tolerances. Existing machine learning (ML) surrogate models for predicting SI metrics such as the inner eye contour, eye-height (EH), eye-width (EW), and transient waveform features typically rely on fixed buffer parameters, requiring costly new data generation and retraining cycles for every technology shift. This paper introduces a buffer-parameterized ML surrogate modeling methodology capable of handling cross-technology variations without retraining by treating IC buffer characteristics, e.g., clock frequency, supply voltage, rise/fall times, jitter, and internal resistors and capacitors, as dynamic model inputs alongside PCB parameters. To identify the optimal surrogate architecture for this high-dimensional space, a comprehensive benchmarking study compares tree-based methods (RFR/GBM), kernel methods (SVR/KRR), Gaussian process regression (GPR), and neural networks. The framework is subsequently validated on a complex interconnect with 44 design parameters. Results show that while anisotropic GPR excels in low-data regimes, neural networks heavily outperform other models on large datasets. Finally, the practical value of the ML surrogate models is demonstrated through a cross-technology design space exploration and optimization scenario, showcasing massive computational speedups for eye mask compliance checking compared to simulation.

We propose a new numerical method to estimate the fault tolerance of failure modes in digital circuit structures with a generative network sampling technique. From a random input of generated bitwise configurations of ideally digitalised analog currents in the digital circuit design with classical logical gates, expected output currents are compared to the realistic signals of a numerical experiment at the discriminator part of the Generative Adversarial Network (GAN) to calculate the deviation from ideal digital electronic signals, including various error modes, such as missing or interchanged logical devices. From the present analysis of a representation of the GAN in terms of complex variables, it is possible to evaluate the robustness in electronic designs by differentiating the impact of failure modes associated with different classical logical elements in the circuit.

This paper presents CARMEN, a runtime-adaptive, CORDIC-accelerated multi-precision vector engine for resource-efficient deep learning inference. The key insight is that CORDIC iteration depth directly governs computational accuracy, enabling dynamic switching between approximate and accurate execution modes without hardware modification. The architecture integrates a low-resource iterative CORDIC-based MAC unit with a time-multiplexed multi-activation function block, supporting flexible 8/16-bit precision and high hardware utilization. ASIC implementation in 28 nm CMOS achieves up to 33% reduction in computation cycles and 21% power savings per MAC stage; a 256-PE configuration delivers 4.83 TOPS/mm2 compute density and 11.67 TOPS/W energy efficiency. FPGA deployment on PynqZ2 validates 154.6 ms latency at 0.43 W for real-time object detection.

Inverse design of RF passive components from S-parameters is a high-dimensional, ill-posed problem, and prior generative approaches are limited to single-layer binary-metallization structures. This paper presents an inverse design approach that generates passive components from partial S-parameter inputs on an $8\times8$ mm board discretized at $64\times64$ pixels with sub-pixel grayscale metallization across 1-20 GHz. The framework generates two-layer copper layouts with vias, with hard physical constraints on feed locations enforced through annealed Langevin projection, flexible multi-modal conditioning on partial S-parameter specifications, port locations, dielectric properties, reference topology, and variable port placement. Candidate designs are generated in seconds, with surrogate-predicted S-parameters matching targets to within $0.77 \pm 1.28$ dB weighted mean absolute error. We validate the approach with two fabricated designs on RO4003C: a manufacturable alternative to a hairpin filter whose coupling gaps violate fabrication rules, and a combline bandpass filter designed from scratch given only target S-parameters.

Dynamic Vision Sensors (DVS) exhibit exceptional dynamic range and low power consumption, making them ideal for edge applications in the Internet of Video Things (IoVT). However, their output is often degraded by spurious Background Activity (BA) noise, leading to unnecessary computational overhead. This paper proposes SNNF, a near-sensor BA noise filter that integrates a compact Event-Based Binary Image (EBBI) representation, a parallel memory architecture, and a single-layer Spiking Neural Network (SNN) classifier. Trained on representative DVS data, the SNN distinguishes signal events from noise with an AUC of 0.89 on standard datasets. The binary-array-based EBBI eliminates timestamp dependency, significantly reducing memory footprint. Moreover, the SNN's spike-based computation replaces power-hungry multipliers with simple accumulation logic and minimizes inter-neuron data width, resulting in an extremely hardware-efficient design. FPGA implementation results show that SNNF reduces memory and logic resources to approximately 11% and 40%, respectively of state-of-the-art filters, while achieving a throughput of 29 Mega events per second (Meps). In a 65 nm CMOS ASIC implementation, SNNF achieves 44.4 Meps with an area and power consumption of only ~13% and <5% of the corresponding ANN-based designs. These results demonstrate that SNNF provides an excellent balance between filtering accuracy and hardware efficiency, making it highly suitable for resource-constrained, near-sensor deployment.

Analog and mixed-signal (AMS) circuit design remains heavily reliant on expert knowledge. While recent AI-driven automation tools can generate candidate topologies, they critically depend on manually curated datasets with functional and performance annotations -- a requirement that current large language models (LLMs) and vision models cannot automate. Existing approaches still require domain experts to manually interpret circuit functionality. We present AMSnet-q, a fully automated, unsupervised pipeline that eliminates human-in-the-loop annotation by converting schematic images directly into a labeled AMS circuit database. Unlike prior work that stops at netlist extraction, our framework automates the complete verification loop: it performs schematic-to-netlist conversion, topology-aware testbench generation, and simulation-based sizing validation to objectively determine circuit functionality. Validated in 28 nm technology, AMSnet-q processed 739 schematics from the AMSnet 1.0 dataset, automatically constructing a repository of 4 circuit classes, 105 distinct topologies, and 89,789 labeled device configurations. By decoupling human effort from dataset volume and reducing the workload to a one-time testbench template per circuit class, AMSnet-q enables scalable, objective, and fully automated AMS database construction.

In financial predictions, the performance of machine learning models is often assessed by Rank IC, which is the Spearman rank correlation between the model predictions and the realized asset returns. Despite its wide adoption, most existing models are trained using regression losses or ranking objectives that may not align with Rank IC. We propose LambdaRankIC, a novel learning-to-rank approach that directly optimizes Rank IC. We circumvent the non-differentiability of the ranking operator by deriving the closed-form expression for the lambda gradients induced by the pairwise rank swaps, which enables efficient gradient-based optimization within the LambdaRank framework. We implement LambdaRankIC as a custom objective in XGBoost. Theoretically, we show that our approach optimizes an upper bound on Rank IC. We evaluate the proposed approach on both simulated and real-world financial data. In simulation studies, LambdaRankIC accurately recovers the true ranking structure in noiseless settings and consistently outperforms regression-based and NDCG-oriented ranking methods under low signal-to-noise ratios and heavy-tailed noise regimes. In empirical experiments using real market data, LambdaRankIC achieves the best out-of-sample performance on evaluation metrics commonly used in finance, including Rank IC, ICIR, monthly return, and Sharpe ratio. These results show that directly optimizing Rank IC can yield substantial improvements over conventional learning objectives in financial predictions when the full-order ranking quality is the primary goal.

Integrated Circuit (IC) verification consumes nearly 70% of the IC development cycle, and recent research leverages Large Language Models (LLMs) to automatically generate testbenches and reduce verification overhead. However, LLMs have difficulty generating testbenches correctly. Unlike high-level programming languages, Hardware Description Languages (HDLs) are extremely rare in LLMs training data, leading LLMs to produce incorrect code. To overcome challenges when using LLMs to generate Universal Verification Methodology (UVM) testbenches and sequences, wepropose HAVEN (Hybrid Automated Verification ENgine) to prevent LLMs from writing HDL directly. For UVM testbench generation, HAVEN utilizes LLM agents to analyze design specifications to produce a structured architectural plan. The HAVEN Template Engine then combines with predefined and protocol-specific templates to generate all UVM components with correct bus-handshake timing. For UVM sequence generation, HAVEN introduces a Protocol-Aware Sequence Domain-Specific Language (DSL) that decomposes sequences into fine-grained step types. A set of predefined DSL patterns first establishes sequences that achieve a high coverage rate without LLM involvement. HAVEN continues to improve the coverage rate by iteratively leveraging LLM agents to analyze coverage gap reports and compose additional targeted DSL sequences. Unlike previous works, HAVEN is the first system that utilizes pre-defined, protocol-specific Jinja2 templates to generate all UVM components and UVM sequences using our proposed Protocol-Aware DSL and rule-based code generator. Our experimental results on 19 open-source IP designs spanning three interface protocols (Direct, Wishbone, AXI4-Lite) show that HAVEN achieves 100% compilation success, 90.6% code coverage, and 87.9% functional coverage on average, and is SOTA among LLM-assisted testbench generation systems.

Recent work in the machine learning literature has demonstrated that deep learning can train neural networks made of discrete logic gate functions to perform simple image classification tasks at very high speeds on CPU, GPU and FPGA platforms. By virtue of being formed by discrete logic gates, these Differentiable Logic Gate Networks (DLGNs) lend themselves naturally to implementation in custom silicon - in this work we present a method to map DLGNs in a one-to-one fashion to a digital CMOS standard cell library by converting the trained model to a gate-level netlist. We also propose a novel loss function whereby the DLGN can optimize the area, and indirectly power consumption, of the resulting circuit by minimizing the expected area per neuron based on the area of the standard cells in the target standard cell library. Finally, we also show for the first time an implementation of a DLGN as a silicon circuit in simulation, performing layout of a DLGN in the SkyWater 130nm process as a custom hard macro using a Cadence standard cell library and performing post-layout power analysis. We find that our custom macro can perform classification on MNIST with 97% accuracy 41.8 million times a second at a power consumption of 83.88 mW.

Accurately predicting the performance of active radio frequency (RF) circuits is essential for modern wireless systems but remains challenging due to highly nonlinear behavior and the high computational cost of traditional simulation tools. Existing machine learning (ML) surrogates often require large datasets to generalize across various topologies or are not accurate on held-out circuits. This work presents a lightweight, data-efficient, and topology-aware graph neural network (GNN) framework for predicting key performance metrics of active RF circuit classes, such as low-noise amplifiers (LNAs), mixers, voltage-controlled oscillators (VCOs), power amplifiers (PAs), and voltage amplifiers (VAs). The proposed framework employs RFIC domain-informed feature indexing to enable cross-topology adaptability by cheap encoding of functional device semantics (e.g., differential pair and varactor transistors) and efficient knowledge transfer. The surrogate model represents circuits using device-terminal graph abstractions to preserve fine-grained connectivity and transistor-level symmetry. The final model is generalized to a wide variety of classes by being trained in parallel. Experimental results demonstrate accurate modeling of multimodal and heavy-tailed RF performance distributions, achieving an average mean relative error (MRE) of 2.71% across nineteen topologies, an improvement of 3.3x and 20x faster in training over prior art, and the generalization to held-out topologies is improved by ~26.2x. Furthermore, this work shows ~36x training data efficiency compared to state-of-the-art, demonstrating its effectiveness for scalable and deployment-ready RF design automation.

As the complexity of integrated circuit designs continues to escalate, functional verification becomes increasingly challenging. Reference models, critical for accelerating the verification process, are themselves becoming more intricate and time-consuming to develop. Despite the promise shown by large language models (LLMs) in code programming, effectively generating complex reference models remains a significant hurdle. Therefore, we introduce ChatModel, an LLM-aided agile reference model generation and verification platform. ChatModel streamlines the transition from design specifications to fully functional reference models by integrating design standardization and hierarchical agile modeling. Employing a building-block generation strategy, it not only enhances the design capabilities of LLMs for reference models but also significantly boosts verification efficiency. We evaluated ChatModel on 300 designs of varying complexity, demonstrating substantial improvements in both efficiency and quality of reference model generation. ChatModel achieved a peak performance improvement of 58.99% compared to alternative methods, with notable enhancements in generation stability, and delivered a 9.18x increase in its capacity to produce reference model designs. Moreover, ChatModel accelerates the reference model design and validation cycles by an average of 7.11x over traditional manual approaches. These results highlight the potential of ChatModel to significantly advance the automation of reference model generation and validation.