Event-Based Vision

Event cameras are bio-inspired sensors that asynchronously capture logarithmic intensity changes, offering inherent advantages in high-speed and high-dynamic-range scenarios. However, the sparse and asynchronous nature of event streams poses a fundamental challenge for modern deep learning architectures. To enable compatibility with standard models, most existing approaches partition the accumulation window into fixed temporal sub-bins. While effective for spatial processing, this internal discretization discards fine-grained temporal structure and constrains inference to the low temporal frequencies imposed by training supervision. To address this limitation, we propose FATE, a unified framework built upon a novel Pillar Encoding (PE). While operating over discrete macro-accumulation windows dictated by the target frequency, PE avoids internal temporal sub-binning. It organizes events into spatial pillars and approximates their intra-window evolution via projection onto a continuous-time orthogonal polynomial basis. This formulation yields an L2-optimal representation that retains rich temporal dynamics in a dense pseudo-image, mitigating information loss under sparse event conditions. To fully leverage this representation, we introduce Frequency-Aware Training (FAT), a soft mean-teacher curriculum that generates temporally dense pseudo-labels, effectively bridging the mismatch between low-frequency supervision and high-frequency inference. Extensive experiments demonstrate that FATE generalizes across architectural paradigms and consistently outperforms strong baselines. It enables robust object detection at high temporal resolutions up to 200 Hz, while incurring minimal overhead in parameter count and inference latency

Non-contact pulse wave reconstruction hinges on the precise recovery of waveform morphology, including the dicrotic notch. Conventional Red-Green-Blue (RGB)-based methods, which extract physiological signals from recorded facial videos, are constrained by the integral imaging mechanism of standard cameras, where the exposure process induces a smoothing effect that attenuates subtle vascular pulsation details. Conversely, neuromorphic event cameras, while offering exceptional sensitivity to intensity fluctuations, are inherently susceptible to noise and artifacts induced by minor motion. To exploit the synergy between frame-based integration and event-based differential sensing, we propose a novel multimodal network named Fusion-E2Pulse. This framework utilizes filtered RGB signals as structural priors to suppress motion artifacts, while leveraging the high-sensitivity of event streams to recover fine-grained morphological details. Experimental results demonstrate that Fusion-E2Pulse achieves state-of-the-art performance, effectively balancing noise suppression and morphological fidelity, achieving a mean absolute error of 0.78 bpm for heart rate estimation, a waveform correlation of 0.89, and a systolic phase duration error of 16.74 ms, validating its efficacy in reconstructing fine-grained pathological features.

Event-based saliency prediction has gained attention recently, as combining event cameras with saliency estimation can act as an upstream stage that naturally improves the efficiency of downstream eventbased perception at the edge. However, current approaches are either neuromorphic, underperforming on event-based saliency benchmarks, or too heavy for resource-constrained edge applications due to their reliance on transformers or 3D convolutions. Drawing inspiration from efficient convolutional modules, SED and aiming to exploit the temporal information in event data, we propose a lightweight network, trained through knowledge distillation, built on a Depthwise Spatio-Temporal Block (DSTconv) -- a factorization of the 3D depthwise separable convolution. Relative to its teacher, our model reduces the model size from 180 MB to 0.32 MB (562x) and the parameter count from 45M to 81k (554x), while matching or outperforming it on the N-DHF1K and N-UCF Sports datasets. Moreover, it generalizes strongly beyond its training distribution, transferring from synthetic to real event data where a model trained from scratch fails.

Conventional RGB cameras have been widely used in multi-object tracking due to their ability to capture rich appearance and semantic information. However, their performance is often degraded under complex real-world challenges, such as motion blur, low illumination, and overexposure. Bio-inspired event cameras offer high temporal resolution and high dynamic range, providing complementary cues under extreme scenarios. Nevertheless, RGB-event multi-object tracking remains underexplored due to the lack of large-scale and well-annotated datasets. To address this issue, we propose FEMOT, a large-scale RGB-event multi-object tracking dataset that covers diverse real-world scenarios and 14 challenging attributes. With both RGB and event data as well as high-quality annotations, FEMOT provides a reliable platform for systematically evaluating RGB-event multi-object tracking methods. Based on FEMOT, we retrain and evaluate over ten strong trackers, thereby establishing a comprehensive benchmark for future research. Furthermore, we propose FEMOTR, a multimodal tracking framework that decouples RGB and event features and fuses them in the frequency domain, thereby effectively exploiting their complementary characteristics for robust object localization and identity association. Extensive experiments on FEMOT and DSEC-MOT datasets demonstrate the effectiveness of the proposed method. The source code and benchmark dataset have been released on https://github.com/Event-AHU/FEMOT.

Event-based vision has drawn increasing attention owing to its distinctive properties, including ultra-high temporal resolution and extreme dynamic range. Recent works have introduced it to video super-resolution (VSR) to enhance flow estimation and temporal alignment. In contrast, this paper shifts the focus of event signals from motion refinement to texture enhancement in VSR. We propose EvTexture++, the first event-driven framework dedicated to texture enhancement in VSR. It leverages high-frequency spatiotemporal details from events to improve texture recovery. EvTexture++ incorporates a customized texture enhancement branch, along with an iterative texture enhancement module that progressively exploits high-temporal-resolution event information for texture restoration. This enables gradual refinement of texture regions across iterations, yielding more accurate and detailed high-resolution outputs. Besides intra-frame texture recovery, large motions could degrade inter-frame temporal consistency, particularly in texture regions, leading to texture flickering. To mitigate this, we further exploit the continuous-time motion cues of events to enhance temporal consistency, introducing a temporal texture alignment module that estimates event-guided texture-aware flow for precise inter-frame texture alignment. Moreover, EvTexture++ is designed as a plug-and-play tool to flexibly boost the performance of existing VSR models. Experiments on five datasets demonstrate that EvTexture++ achieves state-of-the-art performance. When integrated into recent VSR models, it yields significant improvements, with gains of up to 1.55 dB in PSNR on the texture-rich Vid4 dataset. Code: https://github.com/DachunKai/EvTexture.

Moving instance segmentation (MIS) attracts increasing attention due to its broad applications in traffic surveillance, autonomous driving, and animal tracking. Event cameras record asynchronous brightness changes, providing high temporal resolution and dynamic range, which makes them highly sensitive to motion information. By fusing event and image features, motion cues from events can complement spatial details from images, enhancing the performance of MIS. However, current multimodal MIS methods still struggle to segment small moving instances, as event cameras often yield sparse features under limited resolution. Moreover, event features entangle appearance attributes with motion cues, which further restricts effective cross-modal fusion. To address these challenges, we first propose a dual-disentangling feature extraction framework that separates and extracts appearance and motion information within both image and event modalities, thereby improving feature density. Subsequently, a multi-granularity cross-modal alignment is introduced to align distributionally and semantically consistent features across modalities, enabling more effective fusion with rich spatial and temporal details. The experiment results demonstrate that our method achieves state-of-the-art performance in multimodal MIS, especially for small instances under challenging conditions such as fast motion and low-light settings.

Unauthorized unmanned aerial vehicle (UAV) activity around airports, public venues, and other sensitive sites has made protected-airspace monitoring increasingly important. A practical sensing system must search a wide angular region, find small long-range targets, and return both bearing support and UAV-specific evidence before a restricted perimeter is breached. Existing UAV detection paths often rely on spatially organized evidence, such as body extent, silhouette, or track continuity. At long range, however, these cues become difficult to preserve and verify as the target footprint weakens and its image-plane support shrinks. EventRadar follows a complementary cue: propeller-induced temporal periodicity, which recent event-camera sensing studies have shown can reveal UAV-specific motion after appearance becomes weak. We extend this cue to kilometer-scale active sensing with an event-camera prototype. Scene-Anchored Geometry Evidence (SAGE) fuses scanning events with IMU pose to maintain a bearing-indexed scene memory, separating transient candidate support from persistent background clutter. Comb-guided Harmonic-Group Learned Iterative Shrinkage and Thresholding Algorithm (CHG) then treats each candidate as a weak high-rate timing signal and recovers phase-insensitive harmonic evidence with fixed compute. Compared with related event-camera baselines on 700-1500 m UAV event recordings, EventRadar achieves 0.990 mAP$_{.3}$ and 0.949 F1$_{.3}$, reduces FN$_{.3}$ to 0.009, and shows real-time feasibility in prototype profiling.

Existing hand detection algorithms work on images and the detection rate is restricted by the frame rate of the camera. In hand detection applications for moving robotic systems, conventional cameras cause motion blur, especially in darker lighting conditions. We can leverage the use of event-based cameras which possess a high dynamic range, high temporal resolution, and low power consumption. Recent work has shown that using a stereo setup of an event-based and a frame-based camera improves detection accuracy and the bandwidth-latency tradeoff. The main bottleneck in using event-based cameras in object detection and recognition tasks is a relatively low amount of training data. In this work, we propose a methodology and an exemplary synthetic event-based hand dataset from an egocentric, first-person view perspective. The data is synthesized from the existing RGB Egohands dataset with the v2e toolbox. Parameters of the v2e toolbox are varied to provide versions of the dataset with different lighting conditions and scales. Ground truth detections are generated with a fine-tuned YOLOv8 model which is applied to the RGB images in the Egohands dataset and interpolated on the high-temporal resolution events. We use the multi-modal dataset to perform hand detection with existing object detection algorithms which use a multi-modal setup of event and RGB cameras and demonstrate performance comparable to the state-of-the-art.

As a bio-inspired intelligent sensor, event cameras have introduced a new paradigm in the intelligent perception of spatiotemporal information and visual motion estimation, characterized by their high temporal resolution, low latency, and minimal power consumption. However, their asynchronous data streams present significant challenges to traditional synchronous, frame-based algorithms. To address these challenges, this paper presents a novel framework for full degree of freedom (DoF) egomotion estimation directly from asynchronous optical flow, specifically targeting the joint recovery of angular and linear velocities. We decouple the differential epipolar constraint into distinct angular and linear velocity components, and derive its formulation for asynchronous data. Based on this formulation, an optimization algorithm is developed that enables full-DoF egomotion estimation leveraging at least five points. Furthermore, by applying a first-order approximation to rotational dynamics, we transform the constraint equations into a polynomial form, resulting in the first algebraic minimal 5-point solver for this formulation. To ensure real-time performance in high-speed scenarios, we additionally propose an accelerated solver achieved by truncating high-order angular velocity terms. Extensive evaluations on both synthetic and real-world datasets demonstrate that the asynchronous approach outperforms traditional synchronous methods, particularly in its accuracy and robustness to spatiotemporal noise. We believe that this work establishes a critical foundation for efficient and accurate continuous-time motion estimation in high-speed robotics applications.

Despite the rapid advancements in event-based motion estimation, current geometric methods primarily focus on velocity estimation. However, absolute pose estimation, which is equally crucial for key applications such as robotic navigation and augmented reality, remains relatively underexplored. Consequently, the simultaneous recovery of absolute pose and velocity from event streams remains an open and challenging problem. To address this gap, we propose a geometric framework for absolute pose and velocity estimation by leveraging 3D lines in the scene and the events they trigger. At the core of the framework lie two key geometric constraints: the orthogonality between a 3D line and the normal vector of its corresponding event plane, and the collinearity of an event with the 2D projection of its associated line. Based on these constraints, we present both linear and polynomial solvers for absolute pose estimation. The former enables efficient computation, while the latter provides a globally optimal solution for rotation. For velocity estimation, we develop an efficient linear solver and a more accurate optimization-based solver to recover both angular and linear velocities. Notably, our methods require a minimum of three event-line correspondences to determine the 6-DoF absolute pose or velocities independently. Extensive experiments in simulation and on real-world datasets demonstrate that our methods achieve state-of-the-art performance, with significant improvements in accuracy and computational efficiency compared to existing methods. The demo code is publicly available at https://github.com/Zibin6/EventPoseVelocity.

Standard dynamic vision sensors approximate retinal processing by detecting temporal contrast changes, offering high speed and high dynamic range. In this work, we explore whether incorporating additional biologically inspired processing stages - specifically spatial filtering and gain control - can offer advantages for certain downstream tasks such as saliency prediction. We present the first implementation of a multi-stage Silicon Retina model on the SCAMP-5 Pixel Processor Array, along with a GPU-based simulation framework. We evaluate the performance of our model on Video Intensity Reconstruction and Video Saliency Prediction. While the bio-inspired model is less effective at reconstructing absolute intensity frames, it achieves a 13% reduction in saliency prediction loss in comparison to standard DVS event representation, while reducing the event rate by approximately 47%. These experiments are obtained using a lightweight $\approx 100$k-parameter FireNet-style network, adapted from event-based reconstruction to saliency prediction. These results suggest that the silicon retina's "information distillation" mechanism can achieve a more efficient representation for downstream neural networks, particularly in bandwidth-constrained edge applications.

Smart eyewear enables unobtrusive, context-aware interaction through multimodal sensors and on-device intelligence, but is severely limited by power, memory, and compute constraints in a compact form factor. Open-hardware platforms supporting event-based vision and embedded ML at this scale are rare. This work introduces an open-source smart glasses platform for rapid prototyping of novel sensors and algorithms. Its modular design uses a flexible FPC interposer to support both event-based and frame-based cameras without full PCB redesign. A hardware-software co-designed power management system combines a configurable PMIC with event-driven wake-up via an nRF5340 coordinator, keeping the GAP9 RISC-V SoC powered down between inferences. The prototype achieves up to 11.5 hours of continuous on-device ML from a 200 mAh battery. As a demonstration, an egocentric hand gesture recognition pipeline was evaluated on the LynX dataset using polarity-separated event histograms from a Prophesee GENX320 camera. R(2+1)D achieved the best cross-subject accuracy of 83.94% (macro F1 = 0.781) under leave-two-subjects-out validation, with 78.3 ms end-to-end inference latency on the GAP9. Temporal augmentation and removal of ambiguous classes provided the largest gains (+8.9 pp). All hardware designs, firmware, and models are released open source.

Dynamic vision sensors (DVS) offer exceptional temporal resolution and dynamic range by asynchronously reporting pixel-level intensity changes. However, conventional DVS rely on a per-pixel independent triggering mechanism, ignoring the spatial integration performed by biological retinal ganglion cells (RGCs). Consequently, they lack the contrast sensitivity function (CSF) and its inherent sensitivity to mid-spatial frequencies, which inevitably leads to information incompleteness due to sub-threshold signal loss. To bridge this gap, we propose FS-DVS (Frequency-Selective Dynamic Vision Sensor), a novel paradigm that integrates a learnable spatial filter strictly preceding the event triggering process to mimic the RGC aggregation mechanism. By developing a differentiable event simulation framework, the spatial filter can be optimized end-to-end with downstream tasks. Our study reveals that starting from a delta function, the learned spatial filters spontaneously evolve into center-surround patterns that emphasize mid-frequency components, consistently aligning with human CSF. Beyond achieving substantial performance gains in object detection and action recognition, the consistent convergence to human-like CSF characteristics across different tasks underscores the universality of this mid-frequency selective mechanism. Compared to naively increasing sensor sensitivity or relying on post-processing, our paradigm achieves selective information enhancement with high noise resilience, providing a robust, biologically plausible blueprint for next-generation neuromorphic sensors.

Event-to-frame (E2F) reconstruction bridges asynchronous event streams with frame-based vision pipelines, but existing methods often face a trade-off between reconstruction quality and computational efficiency. In this work, we propose an efficient E2F framework that emphasizes causal temporal modeling and computation-aware design. The architecture adopts a recurrent encoder-decoder to incrementally aggregate event information with compact hidden states. To improve robustness under fast motion and illumination variations, a selective context fusion strategy is introduced to integrate event-driven features with prior intensity cues. Within this fusion process, a lightweight hybrid attention mechanism enhances feature selectivity without relying on heavy attention operations. Experimental results on standard benchmarks demonstrate that the proposed approach achieves competitive reconstruction performance while maintaining a favorable balance between accuracy and model complexity.

Event cameras emit asynchronous events in response to environmental appearance changes. The scarcity of real-world event datasets makes simulation essential. However, most simulators infer event timestamps from frame sequences, forcing many threshold crossings to share a small set of discrete times; a failure mode we term timestamp batching that worsens under fast motion and occlusion. We present TIDES, a continuous-time event simulator built on dynamic Gaussian splatting. Because TIDES operates on an explicit 3D scene representation with learnt geometry and motion, it can derive per-pixel intensity dynamics directly from the scene, rather than by differencing rendered frames. This enables accurate threshold-crossing prediction, including multiple crossings per rendering step, without temporal upsampling or frame interpolation. The same 3D scene model reveals where objects partially occlude one another; TIDES uses this to guide adaptive time stepping, concentrating computation only in regions where occlusion dynamics make simple models of brightness change unreliable. Finally, we model finite sensor bandwidth using a tile-level arbiter whose throughput, jitter, and event drops reproduce realistic sensor artifacts. Across paired RGB-event benchmarks, TIDES attains state-of-the-art event-stream fidelity. We also show that events simulated by TIDES transfer more effectively to real downstream tasks than competitors'.

Earth Observation (EO) is undergoing a significant transformation driven by the deployment of novel sensing technologies. Traditional frame-based optical sensors often struggle with motion blur, high power consumption, and extreme data redundancy in challenging orbital environments. In contrast, event-based sensors, also known as neuromorphic cameras, offer a bio-inspired asynchronous approach. By capturing only local illumination changes, they provide microsecond temporal resolution, an extremely high dynamic range, and exceptional energy efficiency. Although the use of these sensors is rapidly expanding from terrestrial systems to orbital platforms, the scientific literature surrounding their space-based applications remains heavily fragmented. To bridge this gap, this article presents a comprehensive review of the state-of-the-art in event-based vision in the space domain. Based on the retrieved literature, we introduce a taxonomy structured around four primary domains: 1) atmospheric and high-speed observation; 2) environmental monitoring and change detection; 3) operational support and onboard processing; and 4) geospatial modeling and predictive analysis. As a result, this survey highlights that neuromorphic engineering is far more than a supplementary imaging technique; it is a paradigm shift that can be used to directly address critical bottlenecks in modern remote sensing and sustainable space exploration.

Recognizing and continuously learning novel human actions without forgetting prior classes is a requirement for emerging AR/VR and robotics applications. For these applications, both on-device processing and learning are essential for privacy and low-latency adaptation. Event cameras address the efficiency of visual sensing with sparse, asynchronous output that is naturally compatible with neuromorphic processing. Yet no prior system has deployed a continual on-device learning pipeline for event-based action recognition using neuromorphic hardware. We present CLANE, Continual Learning of Actions on Neuromorphic Hardware from Event Cameras, deployed end-to-end on Intel Loihi 2. CLANE combines a spiking 2D CNN for spatiotemporal feature extraction with CLP-SNN as its on-chip learning head, extended to action clips via a Temporal Aggregation Layer and a fixed-point Normalization Layer, both novel Loihi 2 modules. On THU E-ACT-50, a 50-class dataset captured under real-world conditions, CLANE achieves 70.4% accuracy in a continual learning task while delivering more than 100x energy reduction and 16x lower latency over a sequential CNN+GRU+CLP edge GPU baseline, validated through iso-algorithm cross-platform benchmarking across three evaluation levels.

Event-based vision sensors offer asynchronous, high-temporal-resolution measurements that are attractive for low-latency robotic perception, but many event-based motion estimation methods are computationally intensive and difficult to map to FPGA hardware. We present a streaming velocity estimator that discretizes asynchronous events into fixed-duration time bins, constructs a 1-bit spatial occupancy grid, and evaluates multiple velocity hypotheses in parallel using only fixed-width integer logic - shift registers, counters, comparators, and small LUT-mapped multiplies - with no dividers and no DSP blocks. It requires no frame reconstruction, no floating-point arithmetic, and no iterative optimization. The method deliberately trades dense sub-pixel optical flow for a sparse, quantized velocity estimate at each active pixel, suited to low-latency tasks such as reactive obstacle avoidance on size-, weight-, and power-constrained platforms. On noisy synthetic data with known ground-truth velocities, the method recovers both magnitude and direction, with magnitude estimates being most challenged when objects of different velocities intersect. On a real event-camera sequence, directional accuracy reaches 99.5% across all four evaluated motion segments, with performance remaining robust across occupancy densities in the 10-40% range. We characterize the algorithm's density-dependent behavior, present a parameter sensitivity analysis, show that the proposed datapath requires less than 2 kB of storage, and implement a single-axis prototype on a low-cost Xilinx Artix-7.

We describe our preliminary design of a real-time asynchronous event-based monocular odometry for planetary exploration. Operating under strict computational constraints, planetary rovers frequently encounter complex, unpredictable environments that demand high-speed sensing and robustness to high dynamic range (HDR) lighting. Event cameras address these needs by reporting asynchronous, pixel-wise brightness changes with microsecond resolution, significantly reducing data bandwidth while maintaining robustness in extreme lighting conditions. We propose an approach based on an Error-State Kalman Filter (ESKF) that leverages this asynchronous event stream to continuously estimate camera ego-motion. The camera state is updated with every tracked position output generated by RATE, a real-time asynchronous feature tracker.

Small aerial robots are particularly well-suited for search and rescue in confined and hazardous environments due to their agility, low cost, and ability to traverse through cluttered spaces that are inaccessible to larger platforms. However, enabling autonomous navigation in complete darkness remains a significant challenge, because small aerial robots cannot easily accommodate perception systems that demand substantial payload, power, or computation. In this work, we present a lightweight perception approach that combines a monocular event camera, a coded aperture lens, and an infrared dot projector to enable navigation in such conditions. The projected pattern, when imaged through the coded aperture, produces depth dependent blur signatures that implicitly encode scene geometry. We train a convolutional neural network to decode these signatures into dense depth maps using only synthetic data generated from a simple planar wall setup. Despite this minimal training regime, the model generalizes zero-shot to complex real-world scenes. Our system operates in real time at 20 Hz on a NVIDIA Jetson Orin Nano, demonstrating suitability for resource-constrained platforms. We further analyze the impact of different coded aperture designs on depth estimation performance. Our approach gives high accuracy (l1 error 7.0cm) upto 2.5m range (2.80% error). These results highlight the potential of combining structured illumination, coded optics, and event-based sensing for enabling robust perception and navigation in complete darkness.

Event cameras offer significant advantages over conventional frame-based counterparts, including high temporal resolution, low latency, and energy efficiency. These characteristics make them suitable for high-speed and high-dynamic range scene acquisition scenarios; however, the lack of dense intensity frames limits the direct applicability of conventional computer vision methods for scene understanding. Event-to-video (E2V) reconstruction seeks to bridge this gap by converting asynchronous event streams into a sequence of synchronous video frames. Existing E2V reconstruction methods based on convolutional neural networks and transformers operate primarily in the spatial domain and often struggle to recover fine structural details while suppressing severe reconstruction artifacts. To address these issues, we propose MSFET-E2V, a novel multiscale frequency-enhanced transformer model. At its core lies a cross-domain attention module, which fuses spatio-temporal features with frequency-aware representations derived from the discrete wavelet transform. Unlike prior methods relying solely on spatial attention, our approach effectively captures both local and global structures by taking into account low- and high-frequency components, enhancing detail preservation and robustness across various motion scenarios. Furthermore, we propose a lightweight wavelet-enhanced skip block that serves as a skip connection, facilitating artifact suppression and structural detail refinement through joint spatial-frequency domain processing. Extensive experiments demonstrate that MSFET-E2V achieves superior performance over state-of-the-art methods on multiple real-world event datasets, offering significant gains in reconstruction quality. Moreover, compared to the existing transformer-based method, our proposed model significantly reduces the number of parameters, the GPU memory usage, and inference time.

Estimating the precise timing of batting impact is crucial for understanding the rapid sensorimotor control. However, this task is challenging for RGB cameras due to insufficient temporal resolution and motion blur. Similarly, Inertial Measurement Units (IMUs) are impractical for actual matches due to sensor intrusiveness and their limited temporal precision. To overcome these limitations, we propose a novel framework leveraging event-based cameras, which offer microsecond resolution and high dynamic range, to estimate impact timing based on the weighted centroid distance between the detected ball and bat. To address the domain gap between event frames and RGB images that degrades segmentation accuracy, we generate high-density event frames. We then introduce a mask refinement network that leverages these frames and bidirectional mask information, optimized using a novel loss function. Experiments on real-world datasets demonstrate that our method achieves superior accuracy under challenging conditions, including low-light environments and severe occlusions, outperforming baselines by reducing the Mean Absolute Error by approximately 63%.

Estimating continuous optical flow is a fundamental yet challenging problem in dynamic visual perception. Event-based cameras, with microsecond latency and high dynamic range, capture brightness changes asynchronously, offering a unique opportunity to model motion with fine temporal precision. However, the scarcity of temporally dense ground-truth annotations limits the effectiveness of supervised learning, while contrast maximization (CM) frameworks, focused on sharpening the Image of Warped Events (IWE), often neglect temporal continuity and structural coherence, leading to distorted trajectories under complex motion. To overcome these challenges, we propose a hybrid-supervised framework for continuous-time optical flow estimation, grounded in the principle of Spatio-temporal Structural Consistency (STSC). This paradigm jointly enforces local structural stability and trajectory continuity, ensuring physically coherent motion across time. To further enhance representation and robustness, we design a bidirectionally complementary multi-scale architecture and employ a curriculum-guided hybrid training strategy, enabling a smooth transition from supervised point constraints to self-supervised manifold regularization. Comprehensive experiments across multiple benchmarks show that our method achieves state-of-the-art performance in both continuous-time and standard optical flow estimation, demonstrating the effectiveness of the proposed learning paradigm.

Event cameras capture brightness changes asynchronously with microsecond resolution, yet existing optical flow methods fail to fully exploit this temporal continuity. Frame-based approaches impose artificial accumulation latency and suffer from domain overfitting, while model-based local methods operate statelessly, discarding temporal history between predictions and yielding inaccurate flows. We propose \textbf{LC-Flow}, the first temporally continuous, learning-based optical flow estimator that operates purely from local events. At its core, a Continuous Local Recurrent Network maintains persistent hidden states per spatial grid, incrementally accumulating temporal context as events arrive. Unlike frame-based methods constrained to fixed accumulation windows, and unlike stateless model-based methods that recompute motion from scratch at each step, LC-Flow produces sparse local flow estimates at arbitrary timestamps with full motion history. To address the inherent ambiguity of local observations, we jointly learn a confidence score that quantifies the reliability of each prediction, explicitly handling event sparsity and the aperture problem. This confidence serves a dual role: filtering unreliable estimates for downstream tasks such as visual odometry, and providing principled weights for a multi-scale confidence-guided aggregation that reconstructs globally consistent flow from the sparse local outputs. LC-Flow achieves state-of-the-art performance among local methods on both MVSEC and DSEC, while the confidence-guided aggregation establishes a new overall state-of-the-art on the MVSEC benchmark, surpassing heavy frame-based networks that rely on global spatial priors.

Saliency prediction has been extensively studied in RGB images and videos as a computational model of human visual attention. In contrast, predicting saliency from event-based data remains largely unexplored, despite the biological inspiration and favorable sensing properties of event cameras. Two obstacles have held this direction back: the absence of large-scale event saliency datasets, and the lack of a strong baseline. In this paper, we introduce SEST (Swin Event-based Saliency Transformer), a transformer-based model for saliency prediction from event data, bridging the data scarcity barrier through event-native pretraining and synthetic supervision. SEST leverages a self-supervised pretrained event-based Swin Transformer backbone combined with a lightweight CNN decoder to produce dynamic saliency maps. To address the scarcity of annotated event-based saliency data, we introduce two new benchmark datasets, N-DHF1K and N-UCF Sports, generated from large-scale RGB saliency benchmarks. Experimental results show that SEST clearly outperforms existing event-based saliency methods and narrows the performance gap with state-of-the-art RGB models. Zero-shot evaluation on a real event camera dataset further demonstrates that our model trained on synthetic data remains transferable on real event streams. To the best of our knowledge, this work is the first to apply deep learning to event-based saliency prediction, opening a new research direction at the intersection of event-based vision and neuromorphic visual attention.

Event cameras are well suited for visual odometry under high-speed motion and challenging lighting conditions due to their low latency, high temporal resolution, and high dynamic range. Deep Event Visual Odometry (DEVO) demonstrated that monocular event-only odometry can achieve strong performance by combining sparse patch tracking, learned patch selection, recurrent correspondence refinement, and differentiable bundle adjustment. In this project, we extend DEVO with a sparse point-cloud export pipeline. Rather than modifying the core odometry formulation, our approach exposes the internal 3D structure already estimated by DEVO and converts it into an explicit point-cloud representation for visualization and further processing. In addition, we implement a practical workflow for data export, format conversion, and point-cloud cleanup. The resulting system preserves the original visual odometry pipeline while enabling sparse geometric scene output. Experiments on the BOARD SLOW sequence show that the exported sparse cloud is locally consistent with EMVS reconstructions, achieving high precision at a 5 cm threshold, while also highlighting the expected limitations in density, completeness, and sensitivity to accumulated odometry noise.

Event-based low-light image enhancement (LIE) methods mainly focus on incorporating high dynamic range (HDR) information from events while overlooking the essential global illumination in images and the inherent noise sensitivity of event signals in real-world scenarios. To address these issues, we propose EIC-LIE, an event-illumination collaborative LIE framework. Concretely, we first design an Event-Illumination Collaborative Interaction (EICI) module, which contains two key processes: forward gathering, which gathers HDR features across varying lighting conditions, and backward injection, which provides complementary content for illumination and event representations. Next, we introduce an Illumination-aware Event Filter (IAEF) that dynamically reduces event noise based on brightness statistics derived from images. Additionally, we build a beam-splitter-based hybrid imaging system to collect high-quality event-image pairs with temporal synchronization from dynamic scenes, providing the first high-resolution, real-world event-based LIE dataset. Extensive experiments show that our EIC-LIE outperforms state-of-the-art methods on five real-world and synthetic datasets, significantly surpassing previous methods with improvements of up to 1.24dB in PSNR and 0.069 in SSIM. The code and dataset are released at https://github.com/QUEAHREN/EIC-LIE.

Gait recognition enables non-intrusive, privacy-preserving identification but suffers in uncontrolled environments due to illumination and motion sensitivity of conventional cameras. In this work, we explore gait recognition using event cameras, which offer microsecond temporal resolution and high dynamic range, naturally capturing robust dynamic cues and suppressing static noise. Existing event-based approaches typically aggregate event streams into event images over long time windows, thereby discarding fine-grained motion dynamics critical for gait recognition. Therefore, we propose \textbf{EventGait}, an end-to-end dual-stream framework that separately models motion and shape while preserving the advantages of events. Our dynamic stream leverages a Mixture of Spiking Experts (MoSE) with diverse neuron constants for robust dynamic perception across complex motion and illumination scenes, while the static stream learns dense shape representations via Cross-modal Structure Alignment (CroSA) with large vision foundation models. To address the absence of large-scale event-based gait datasets, we introduce a synthesis pipeline and release two new benchmarks: SUSTech1K-E and CCGR-Mini-E. Extensive experiments have shown that event-based gait recognition not only achieves results comparable to camera-based gait recognition under normal conditions but also significantly outperforms it in low-light scenarios. Our approach sets a new state of the art on both synthesized and real-world event-based gait benchmarks, highlighting the robustness and potential of event-driven gait analysis. The code and datasets are released at https://github.com/QUEAHREN/EventGait.

Human Action Recognition (HAR) is a fundamental computer vision task with diverse real-world applications. Practical deployments often involve low-light environments and unconstrained 6-DoF camera motion, conditions that degrade visual quality, disrupt temporal coherence, and compromise reliability of existing methods. Event cameras, with high low-light sensitivity and microsecond-level temporal resolution, paired with an inertial measurement unit (IMU), present a promising solution. However, current research faces two key challenges: absence of a benchmark integrating low-light conditions, 6-DoF motion, and synchronized IMU data; and lack of effective motion compensation techniques. To address these, we propose Event-IMU Stabilized HAR (EIS-HAR), with two modules. The first is an EIS module that reduces motion blur via a non-linear warping function to reconstruct a motion-compensated input. The second is a HAR module with a four-stage hybrid architecture to efficiently extract spatiotemporal features for accurate action recognition. To alleviate data scarcity, we introduce DarkShake-DVS, the first large-scale event-based HAR benchmark that includes 18,041 realworld clips captured in low light and intense 6-DoF motion, supplemented by synchronized IMU data. Extensive experiments on three datasets demonstrate consistent superiority of EIS-HAR over state-of-the-art methods.

Conventional vision-language models (VLMs) struggle to interpret scenes captured under adverse conditions (e.g., low light, high dynamic range, or fast motion) because standard RGB images degrade in such environments. Event cameras provide a complementary modality: they asynchronously record per-pixel brightness changes with high temporal resolution and wide dynamic range, preserving motion cues where frames fail. We propose RE-VLM, the first dual-stream vision-language model that jointly leverages RGB images and event streams for robust scene understanding across both normal and challenging conditions. RE-VLM employs parallel RGB and event encoders together with a progressive training strategy that aligns heterogeneous visual features with language. To address the scarcity of RGB-Event-Text supervision, we further propose a graph-driven pipeline that converts synchronized RGB-Event streams into verifiable scene graphs, from which we synthesize captions and question-answer (QA) pairs. To develop and evaluate RE-VLM, we construct two datasets: PEOD-Chat, targeting illumination-challenged scenes, and RGBE-Chat, covering diverse scenarios. On captioning and VQA benchmarks, RE-VLM consistently outperforms state-of-the-art RGB-only and event-only models with comparable parameter counts, with particularly large gains under challenging conditions. These results demonstrate the effectiveness of event-augmented VLMs in achieving robust vision-language understanding across a wide range of real-world environments.