Humanoid Robotics

Affective touch in human-robot interaction is shaped not only by emotional intent, but also by robot embodiment, including touch location, physical constraints, and perceived agency or social role. Existing HRI studies typically focus on one or two isolated body parts, limiting understanding of how affective touch generalises across the full humanoid body. We present a study with 32 participants interacting with the iCub robot, which is equipped with full-body distributed tactile sensors. Participants expressed eight emotions under three conditions: free touch, arm-only touch, and torso-only touch. Results show that body region and spatial constraints jointly shaped both touch location and dynamics. In free touch, participants preferred socially accessible upper-body regions, while less frequently touched areas showed stronger emotion-specific selectivity. Emotion-related variation was more evident in motion features for arm-only touch and pressure features for torso-only touch. Touch strategies also did not transfer directly between free and constrained conditions, even within the same coarse body region. Participants reported increased closeness to the robot after interaction, with around 30 percent reporting a change in perceived social relationship. Together, these findings show that affective touch expression is strongly body-region dependent and shaped by embodiment constraints.

High-quality demonstration data are essential for humanoid robot skill learning, especially for whole-body behaviors that require coordinated perception, locomotion, and manipulation. Existing data-collection methods largely rely on robot teleoperation, which is constrained by hardware accessibility, operator expertise, and limited efficiency. Inspired by the Universal Manipulation Interface (UMI), we propose BifrostUMI, a portable and robot-free framework for humanoid whole-body data collection. BifrostUMI uses lightweight VR devices and UMI-inspired grippers to collect sparse human keypoint trajectories, wrist-view observations, and gripper actions. These demonstrations train a high-level policy to predict future keypoints, which are retargeted to robot-native whole-body references and executed by a whole-body controller. Experiments in five real-world scenarios demonstrate the effectiveness of the proposed framework and validate the collected demonstrations for transferable humanoid whole-body skill learning.

Humanoid robots are entering our physical world at scale, yet as oversized toys--good at singing and dancing, but short on force-interaction capabilities for practical tasks. Bridging this gap necessitates prioritizing reliable contact perception as a fundamental requirement. Estimating external wrenches in humanoids is complicated by floating-base dynamics and indeterminate contact locations. Existing analytical frameworks require idealistic assumptions and hard-to-obtain measurements, which are often unavailable in practice. To bridge this gap, we propose SixthSense, a task-agnostic approach that infers whole-body contact timing, location, and wrenches from proprioception and IMU data alone. To capture the multi-modal dynamics between unstructured contact inputs and the uncertain motion outputs, we employ conditional flow matching to tokenize proprioceptive histories and estimate a spatiotemporally sparse contact-event flow. SixthSense serves as a plug-and-play perception module for applications including collision detection, physical human-robot interaction, and force-feedback teleoperation. Experiments across standing, walking, and whole-body motion-tracking policies showcased unprecedented performance in diverse behaviors.

Motion retargeting from humans to human-like artificial agents is becoming increasingly important as humanoid robots grow more capable. However, most existing approaches focus only on reproducing kinematics and ignore the rich sensorimotor experience associated with human movement. In this work, we present a framework for simulating the multimodal sensorimotor experiences of infants using physical and virtual humanoids. From a single video, our method reconstructs the infant's body configuration by extracting its skeletal structure and estimating the full 3D pose from each frame. Then we map the reconstructed motion onto several developmental platforms: the physical iCub robot and the virtual simulators pyCub, EMFANT and MIMo. Replaying the retargeted motions on these embodiments produces simulated multisensory streams including proprioception (joints and muscles), touch, and vision. For the best-matching embodiment, the retargeting achieves sub-centimeter accuracy and enables a rich multimodal analysis of infant development as well as enhanced automated annotation of behaviors. This framework provides a unique window into the infant's sensorimotor experience, offering new tools for robotics, developmental science, and early detection of neurodevelopmental disorders. The code is available at https://github.com/ctu-vras/motion-retargeting/.

Collision-free motion is often aided by tactile and proximity sensors distributed on the body of the robot due to their resistance to occlusion as opposed to external cameras. However, how to shape the sensor's properties, such as sensing coverage; type; and range, to enable avoidant behavior remains unclear. In this work, we present a reinforcement learning framework for whole-body collision avoidance on a humanoid H1-2 robot and use it to characterize how sensor properties shape learned avoidance behavior. Using dodgeball as a benchmark task, we ablate the properties of sensors distributed across the upper body of the robot and find that raw proximity measurements can substitute for explicit object localization provided the sensing range is sufficient and that sparse non-directional proximity signals outpace dense directional alternatives in sample efficiency.

Humanoid robots operating in unstructured environments must recover from unexpected disturbances-a capability that remains challenging for end-to-end control policies. We present RECOVERFORMER, a fully end-to-end humanoid recovery policy that learns when and how to switch among recovery behaviors-including compensatory stepping, hand-environment contact, and center-of-mass reshaping-while maintaining robust performance under model mismatch. The architecture combines a causal transformer over a 50-step observation history with two novel heads: a latent recovery mode that enables smooth transitions among distinct recovery strategies, and a contact affordance head that predicts which environmental surfaces (walls, railings, table edges) are beneficial for stabilization. We evaluate RECOVERFORMER on the Unitree G1 humanoid in MuJoCo. Trained only on open floor, RECOVERFORMER transfers zero shot to walled environments, achieving 100% recovery success across 100-300 N pushes and across wall distances from 0.25-1.4m. Under zero-shot dynamics mismatch, RECOVERFORMER reaches 75.5% at plus +25% mass, 89% under 30 ms latency, 91.5% at low friction, and 99% under compound friction, latency and mass perturbation. The learned latent modes specialize across force regimes without mode-level supervision, validated by t-SNE analysis of 300 episodes. Taken together, these results show that a single end-to-end policy can deliver multi-modal, contact aware humanoid recovery that generalizes across perturbation magnitude, contact geometry, and dynamics shift.

Controllable cooperative humanoid manipulation is a fundamental yet challenging problem for embodied intelligence, due to severe data scarcity, complexities in multi-agent coordination, and limited generalization across objects. In this paper, we present SynAgent, a unified framework that enables scalable and physically plausible cooperative manipulation by leveraging Solo-to-Cooperative Agent Synergy to transfer skills from single-agent human-object interaction to multi-agent human-object-human scenarios. To maintain semantic integrity during motion transfer, we introduce an interaction-preserving retargeting method based on an Interact Mesh constructed via Delaunay tetrahedralization, which faithfully maintains spatial relationships among humans and objects. Building upon this refined data, we propose a single-agent pretraining and adaptation paradigm that bootstraps synergistic collaborative behaviors from abundant single-human data through decentralized training and multi-agent PPO. Finally, we develop a trajectory-conditioned generative policy using a conditional VAE, trained via multi-teacher distillation from motion imitation priors to achieve stable and controllable object-level trajectory execution. Extensive experiments demonstrate that SynAgent significantly outperforms existing baselines in both cooperative imitation and trajectory-conditioned control, while generalizing across diverse object geometries. Codes and data will be available after publication. Project Page: http://yw0208.github.io/synagent

Deploying a humanoid robot to manipulate a new object has traditionally required one to two days of effort: data collection, manual annotation, 3D model acquisition, and model training. This paper presents an end-to-end rapid deployment pipeline that integrates three foundation-model components to shorten the onboarding cycle for a new object to approximately 30 minutes: (i) Roboflow-based automatic annotation to assist in training a YOLOv8 object detector; (ii) 3D reconstruction based on Meta SAM 3D, which eliminates the need for a dedicated laser scanner; and (iii) zero-shot 6-DoF pose tracking based on FoundationPose, using the SAM3D-generated mesh directly as the template. The estimated pose drives a Unity-based inverse kinematics planner, whose joint commands are streamed via UDP to a UnitreeG1 humanoid and executed through the Unitree SDK. We demonstrate detection accuracy of [email protected] = 0.995, pose tracking precision of $σ< 1.05$ mm, and successful grasping on a real robot at five positions within the workspace. We further verify the generality of the pipeline on an automobile-window glue-application task. The results show that combining foundation models for perception with everyday imaging devices (e.g., smartphones) can substantially lower the deployment barrier for humanoid manipulation tasks.

Achieving versatile and natural whole-body humanoid interaction control remains challenging due to the high cost of whole-body teleoperation data. We present ZeroWBC, a teleoperation-free framework that learns humanoid whole-body interaction from human egocentric videos paired with synchronized whole-body motion and text annotations. ZeroWBC adopts a generation-then-tracking formulation to tackle the static scene whole-body interaction control problem. Given an initial egocentric image and a language instruction, a fine-tuned Vision-Language Model generates future human whole-body motion tokens, which are decoded into continuous motions and retargeted to the humanoid. The resulting reference motions, together with root and key body-part trajectories, are then executed by a general interactive motion tracking policy. To improve interaction performance, we introduce an interaction-oriented tracking reward that prioritizes global root and key body-part trajectory alignment while preserving natural whole-body motion. Experiments on the Unitree G1 humanoid robot show that ZeroWBC enables diverse scene-aware behaviors without robot teleoperation demonstrations. These results suggest a scalable paradigm for learning natural humanoid whole-body interaction from human egocentric data.

From loco-motion to dextrous manipulation, humanoid robots have made remarkable strides in demonstrating complex full-body capabilities. However, the majority of current robot learning datasets and benchmarks mainly focus on stationary robot arms, and the few existing humanoid datasets are either confined to fixed environments or limited in task diversity, often lacking human-humanoid interaction and lower-body locomotion. Moreover, there are a few standardized evaluation platforms for benchmarking learning-based policies on humanoid data. In this work, we present Humanoid Everyday, a large-scale and diverse humanoid manipulation dataset characterized by extensive task variety involving dextrous object manipulation, human-humanoid interaction, locomotion-integrated actions, and more. Leveraging a highly efficient human-supervised teleoperation pipeline, Humanoid Everyday aggregates high-quality multimodal sensory data, including RGB, depth, LiDAR, and tactile inputs, together with natural language annotations, comprising 10.3k trajectories and over 3 million frames of data across 260 tasks across 7 broad categories. In addition, we conduct an analysis of representative policy learning methods on our dataset, providing insights into their strengths and limitations across different task categories. For standardized evaluation, we introduce a cloud-based evaluation platform that allows researchers to seamlessly deploy their policies in our controlled setting and receive performance feedback. By releasing Humanoid Everyday along with our policy learning analysis and a standardized cloud-based evaluation platform, we intend to advance research in general-purpose humanoid manipulation and lay the groundwork for more capable and embodied robotic agents in real-world scenarios. Our dataset, data collection code, and cloud evaluation website are made publicly available on our project website.

Robotic laparoscopic surgery has gained increasing attention in recent years for its potential to deliver more efficient and precise minimally invasive procedures. However, adoption of surgical robotic platforms remains largely confined to high-resource medical centers, exacerbating healthcare disparities in rural and low-resource regions. To close this gap, a range of solutions has been explored, from remote mentorship to fully remote telesurgery. Yet, the practical deployment of surgical robotic systems to underserved communities remains an unsolved challenge. Humanoid systems offer a promising path toward deployability, as they can directly operate in environments designed for humans without extensive infrastructure modifications -- including operating rooms. In this work, we introduce LapSurgie, the first humanoid-robot-based laparoscopic teleoperation framework. The system leverages an inverse-mapping strategy for manual-wristed laparoscopic instruments that abides to remote center-of-motion constraints, enabling precise hand-to-tool control of off-the-shelf surgical laparoscopic tools without additional setup requirements. A control console equipped with a stereo vision system provides real-time visual feedback. Finally, a comprehensive user study across platforms demonstrates the effectiveness of the proposed framework and provides initial evidence for the feasibility of deploying humanoid robots in laparoscopic procedures.

Human manipulation skills represent a pinnacle of voluntary motor functions, requiring the coordination of many degrees of freedom and the processing of high-dimensional sensor input to achieve remarkable dexterity. Thus, this study investigates whether the human hand, with its associated biomechanical properties, sensors, and control mechanisms, is an ideal that should be strived for in robotics. Do robots need anthropomorphic hands? First, characteristics of the human hand in terms of biomechanics and perception are extracted to compare them with currently commercially available robotic hands. From this comparison, research questions are derived that connect manipulation system complexity to skill repertoire size and dexterity. These questions are addressed through a systematic literature review, analyzing the manipulation capabilities demonstrated in 125 papers published between 2019 and 2025. Although complex five-fingered hands are often considered the ultimate goal for robotic manipulators, they are not necessary for all tasks. Findings indicate that in-hand manipulation does not benefit from anthropomorphic hand design, as simpler mechanisms are sufficient; however, mechanism complexity correlates with the breadth of manipulation tasks a hand can perform. Sensor integration and intelligent manipulation strategies remain underexplored, which may be due to a misalignment with hand design: instead of replicating the number of fingers and degrees of freedom, focusing on robustness and softness would allow more intelligent control and learning to exploit environmental contacts and integrate more sensors. Finally, the article argues for standardized evaluation criteria to enable the systematic comparison of hand designs and manipulation systems.

Push recovery during locomotion will facilitate the deployment of humanoid robots in human-centered environments. In this paper, we present a unified framework for walking control and push recovery for humanoid robots, leveraging the arms for push recovery while dynamically walking. The key innovation is to use the environment, such as walls, to facilitate push recovery by combining Single Rigid Body model predictive control (SRB-MPC) with Hybrid Linear Inverted Pendulum (HLIP) dynamics to enable robust locomotion, push detection, and recovery by utilizing the robot's arms to brace against such walls and dynamically adjusting the desired contact forces and stepping patterns. Extensive simulation results on a humanoid robot demonstrate improved perturbation rejection and tracking performance compared to HLIP alone, with the robot able to recover from pushes up to 100N for 0.2s while walking at commanded speeds up to 0.5m/s. Robustness is further validated in scenarios with angled walls and multi-directional pushes.