Quadrotor Control

While reinforcement learning (RL) has been successfully applied to conventional quadrotors for agile and robust flight, whether actuator-level RL can be reliably deployed on tilt-rotor aerial robots remains an open question, as the hybrid actuation coupling brushless rotors with rotational joints introduces a substantially harder sim-to-real gap. In this work, we propose an end-to-end RL framework for omnidirectional motion control on overactuated tilt-rotor quadrotors, directly mapping target poses to joint and rotor commands. The learning framework combines actuator-level simulation with an asymmetric actor-critic architecture for 6D pose-reaching. For reliable sim-to-real transfer on the hybrid actuation, we integrate system identification with minimal yet physically grounded domain randomization. The trained policy is deployed zero-shot on real hardware and evaluated across waypoint hovering, external disturbances, payload variation and trajectory tracking, together with simulated traversal of allocation-singular configurations. The policy is compared with a state-of-the-art NMPC baseline: NMPC attains lower steady-state position error, whereas the RL policy offers a more uniform orientation error across evaluations, transitions between poses faster, and requires less onboard computation.

Efficiently training control policies for robots is a major challenge that can greatly benefit from utilizing knowledge gained from training similar systems through cross-embodiment knowledge transfer. In this work, we focus on accelerating policy training using a library-based initialization scheme that enables effective knowledge transfer across multirotor configurations. By leveraging a physics-aware neural control architecture that combines a reinforcement learning-based controller and a supervised control allocation network, we enable the reuse of previously trained policies. To this end, we utilize a policy evaluation-based similarity measure that identifies suitable policies for initialization from a library. We demonstrate that this measure correlates with the reduction in environment interactions needed to reach target performance and is therefore suited for initialization. Extensive simulation and real-world experiments confirm that our control architecture achieves state-of-the-art control performance, and that our initialization scheme saves on average up to $73.5\%$ of environment interactions (compared to training a policy from scratch) across diverse quadrotor and hexarotor designs, paving the way for efficient cross-embodiment transfer in reinforcement learning.

Many aerial tasks involving quadrotors demand both instant reactivity and long-horizon planning for obstacle avoidance, energy efficiency, or trajectory tracking. High-fidelity models enable accurate control but are too slow for long horizons. Low-fidelity planners scale but cannot directly control the system, necessitating cascaded architectures. Prevailing hierarchical approaches plan with a simplified model and use a high-fidelity controller for tracking, yet this decomposition is inherently suboptimal. The controller is limited by the coarse plan, and conventional MPC alternatives shorten the horizon to stay real-time feasible. We present UNIQUE, an MPC architecture that replaces this hierarchical stacking with temporal cascading. The planning problem is formulated as the second-tail horizon of a single multi-phase MPC, rather than being solved separately. We align costs across horizons, derive feasibility constraints for the point-mass planning model, and introduce transition constraints that convert high-fidelity states into meaningful low-fidelity states. Parallel point-mass and mixed-integer solvers address nonconvexities while incorporating progressive 3D obstacle smoothing over the planning horizon. In simulations and real flights, under equal computational budgets, UNIQUE improves closed-loop tracking by up to 75% compared with standard MPC and hierarchical baselines. Ablations and Pareto analyses confirm performance gains across variations in horizon, constraint approximations, and smoothing schedules.

Photovoltaic (PV) panels are becoming increasingly widespread in the domain of renewable energy, and thus, small efficiency gains can have massive effects. Anti-reflective and self-cleaning coatings enhance panel performance but degrade over time, requiring periodic reapplication. Uncrewed Aerial Vehicles (UAVs) offer a flexible and autonomous way to apply protective coatings more often and at lower cost compared to traditional manual coating methods. We present a quadcopter-based system, equipped with a liquid dispersion mechanism, designed to automate such tasks. The localization stack only uses onboard sensors, relying on visual-inertial odometry and the relative position of the PV panel detected with respect to the quadcopter. The control relies on a model-based controller that accounts for the ground effect and the mass decrease of the quadcopter during liquid dispersion. We validate the autonomy capabilities of our system through extensive indoor and outdoor experiments.

Uncertainties and disturbances in robotic systems, such as aerodynamic forces, are fundamentally outcomes of physical interactions with the environment, manifesting as learnable spatiotemporal sequences rather than random noise. However, achieving high-precision control for robotic systems operating in unstructured environments is often hindered by complex unmodeled dynamics and external disturbances. While learning-based methods offer powerful approximation capabilities, they typically suffer from heavy reliance on offline training and lack theoretical guarantees. Conversely, traditional robust control strategies are predominantly reactive, limited to instantaneous estimation without the foresight to anticipate future disturbance trends. To bridge this gap, this paper proposes a differentiable data-enabled Koopman control framework termed DEKC. Unlike black-box approaches, DEKC adopts a hybrid modeling strategy that retains the nominal physics model while employing a deep neural network to parameterize the lifting function of Koopman operator for unknown residual dynamics. Crucially, the framework formulates disturbances as a dynamical system, learning their temporal evolution in a global linear space. This enables the prediction of future disturbance trajectories, which are explicitly integrated into controller for preemptive compensation. Furthermore, an online backward gradient update mechanism is introduced to ensure real-time adaptation to time-varying uncertainties. Numerical simulations on a tethered space robot demonstrate the efficacy of the proposed DEKC in mitigating highly coupled uncertainties. Complementing these results, real-world experiments on a quadrotor substantiate its superiority in tracking agile trajectories under uncertainties induced by aerodynamics and suspended payload.

Cooperative Localization is a promising approach to achieving safe quadrotor formation flight through precise positioning via low-cost inter-drone sensors. This paper develops an observability-aware control principle tailored to quadrotor formation flight with range-only inter-drone measurements. The control principle is based on a novel approximation of the local observability Gramian (LOG), which we name the Short-Term Local Observability Gramian (STLOG). The validity of STLOG is established by proving its link to directional estimation precision in nonlinear systems. We propose the Observability Predictive Controller (OPC), a receding-horizon controller that generates optimal inputs to enhance information gain in weakly observable state directions by maximizing the minimum eigenvalue of the STLOG. This reduces the risk of estimator divergence due to the unbounded growth of uncertainty in weakly observed state components. Monte Carlo simulations and flight experiments are conducted with quadrotors in a GNSS-denied ferrying mission, showing that the OPC improves positioning confidence and estimator robustness.