Solar Power Forecasting

Recent power measurements provide valuable information for photovoltaic(PV) power forecasting, but directly extrapolating short-term trends can introduce substantial errors over longer forecast horizons. To address this challenge, we propose state transport routing (STR), a lightweight adapter that refines the predictions of a frozen forecasting model. STR combines the original forecast with two complementary trajectories derived from the latest measured power level and its recent trend. A horizon-conditioned router adjusts their contributions over the first 120 min, while leaving subsequent predictions unchanged. Experiments on four public PV datasets show that STR consistently outperforms a parameter-matched residual adapter. On PVDAQ, the same approach improves five neural forecasting backbones, reducing all-horizon normalized mean absolute error by 0.0201-0.2364 percentage points, with paired 95% confidence intervals excluding zero. No reliable improvement is observed for LightGBM. These findings demonstrate the potential of structured state adaptation to improve short-term forecasting across different neural architectures without retraining the underlying models or altering their longer-horizon predictions.

Solar photovoltaic (PV) forecasting in regions affected by load shedding is challenging because reliable historical observations are scarce. This study proposes a transfer learning framework combined with Conformalized Quantile Regression (CQR) to improve PV power forecasting and provide reliable uncertainty estimates under severe data scarcity. A source-domain PV dataset from Alice Springs, Australia, is used to pretrain a temporal forecasting model, which is then adapted to simulated Bangladesh PV data representing different levels of historical availability. Experimental results show that transfer learning reduces RMSE by up to 23.7% when only one month of target-domain data is available and by 13.7% with three months of data. The proposed Transfer Learning plus CQR framework achieves 94.3% empirical coverage with three months of target data while producing prediction intervals that are 14% narrower than those obtained without transfer learning. These results demonstrate that combining transfer learning with conformal uncertainty quantification can improve both point forecasting accuracy and uncertainty reliability when target-domain PV data are severely limited.

An ensemble can improve photovoltaic forecasts while adding components that contribute little or increase computation. We assess these effects through matched comparisons and ablations of a fixed heterogeneous predictor bank. Hourly experiments use GEFCom2014 and three additional public datasets, with chronological partitions and three seeds. Under retrospective ERA5 assistance, static fusion reduces scaled mean absolute error against matched boosting by 1.11%, 4.41%, and 1.63% on PVDAQ, OPSD, and Ausgrid; only OPSD remains supported after multiple-comparison correction. Weather gating offers no consistent incremental benefit. Exploratory member removals show group-level dependence alongside individual redundancy. A separate, previously inspected fifteen-minute case replaces one neural member with a tree predictor: normalized error falls by 1.72%, but measured inference is slower. These findings support component-wise evaluation with explicit limits on weather availability and test-set reuse.

Short-term photovoltaic power forecasting requires models to represent regular solar cycles and weather-driven fluctuations whose importance changes with the forecast horizon. This study develops a hierarchical ensemble that combines temporal neural models, historical analogs, state climatology, and gradient-boosted trees. Solar geometry and numerical weather forecasts describe the expected generation conditions, while horizon-specific convex weights combine complementary predictions. A separate calibration step uses available historical forecast errors to account for recent bias. The framework is evaluated on public PVDAQ data at 15--240-minute horizons and on three GEFCom2014 solar zones at hourly horizons up to four hours. On PVDAQ, the ensemble achieves a daylight capacity-normalized mean absolute error of 4.315%, reducing error by 4.11% relative to full-feature LightGBM and by 6.03% relative to fine-tuned Chronos-2 under identical calibration. Expert-removal experiments identify redundancy within the ensemble. Across three training seeds on GEFCom2014, learned fusion improves upon equal weighting but performs comparably to LightGBM. The results support horizon-specific combination as a useful forecasting strategy while showing that its advantage over strong individual models depends on the dataset and evaluation period.

Short-term photovoltaic (PV) power and global horizontal irradiance (GHI) forecasts are essential for effective dispatch, reserve scheduling, and grid operations. At these forecasting horizons, errors are predominantly driven by cloud induced ramps: relying solely on historical numerical data may struggle to anticipate an incoming cloud, making ground-based sky images a crucial complementary physical signal. Furthermore, forecast performance is highly sensitive to location and local observing conditions, creating a strong need for site-specific data that are often scarce. Recently, large language models (LLMs) have demonstrated competitive performance and high data efficiency in time-series forecasting. Despite their success, existing LLM-based forecasting methods remain predominantly unimodal, relying primarily on historical numerical time-series data. Effectively incorporating sky imagery into an LLM-based forecasting framework remains under-explored and an open challenge. In this paper, we propose SolCloudLLM, an LLM-based multimodal forecasting framework. SolCloudLLM aligns sky-image patches with time-series patches and fuses their corresponding representations through bidirectional multimodal fusion, yielding a unified representation that is subsequently mapped into the embedding space of an LLM. Extensive experiments on the SIRTA and SKIPP'D datasets demonstrate that SolCloudLLM consistently outperforms the best baseline methods in MSE across all forecasting horizons, achieving a maximum relative MSE reduction of 25.4%. Stratified analysis further indicates that the benefits of multimodal fusion are concentrated primarily under cloudy conditions. Notably, SolCloudLLM achieves the best performance in nearly all few-shot settings, whereas other deep learning baselines experience substantial performance degradation and are frequently outperformed by the non-learning physical method.

Accurate solar irradiance forecasting is essential for the reliable integration of photovoltaic power into modern electricity grids. All-sky imagers (ASI) provide high-resolution observations of clouds, making them well suited for intra-hour forecasting. Recent deep learning approaches have substantially improved forecast accuracy but are often limited by deterministic predictions and a reduced capability to anticipate ramp events. This work proposes FarSky, a generative forecasting framework that leverages latent-space coupling to learn task-aware representations of sky images. A multi-task autoencoder first learns a shared latent representation for image reconstruction and irradiance estimation. A latent diffusion model then generates future latent states conditioned on recent observations, from which irradiance forecasts are directly decoded. Probabilistic forecasts are inherently obtained through stochastic sampling. The framework is developed using a multi-year ASI dataset acquired at the Plataforma Solar de Almería, Spain, and evaluated on two independent test datasets against persistence, state-of-the-art end-to-end, and generative forecasting approaches. FarSky achieves the best overall deterministic and probabilistic forecasting performance, improving forecast skill by up to 11 percentage points. Furthermore, it substantially improves ramp event detection over existing methods, achieving F1-scores above 60%. These results demonstrate the potential of combining generative models with task-aware latent-space coupling for solar forecasting.

Reliable photovoltaic (PV) forecasts can support low-carbon energy systems, but deployed sites may have only short and incomplete records. Physical and hybrid methods can be sensitive to weather inputs, calibration, and timestamp-alignment, while individual machine learning models may capture different parts of the forecasting problem. We study hourly day-ahead PV forecasting at a United Kingdom charging station using one year of inverter measurements, with 9.25% of hours missing. The pipeline checks timestamp-alignment, derives solar and clearness features, adds short-term weather context, and combines five complementary models using non-negative least squares stacking, with the combination fitted only on validation observations. We compare against smart persistence, a weather-scaled baseline that carries the previous day's PV behaviour forward using target-day irradiance. With retrospective weather, the combined model reduces daylight normalised root mean square error (RMSE) by 31.2% under random day-fold evaluation and by 2.9% under rolling-origin evaluation, although the latter improvement is not robust across days. It also improves by 3.0% over the single model selected from validation performance. Replacing retrospective weather with a public product sampled at a constant 24-hour lead increases daylight RMSE by 13.1% and 4.2% under the two protocols, while retaining positive skill over smart persistence.

Sky-image irradiance studies often compare forecasting systems in which the image encoder, temporal model, fusion block, target definition, and training recipe all change together. We use a narrower protocol: the multimodal forecasting pipeline is fixed, and only the visual backbone is varied. The shared setup keeps preprocessing, clear-sky-index normalization, weather-history encoding, fusion, regression head, loss, optimizer schedule, seed, and chronological split policy unchanged. We compare ConvNeXt, Swin Transformer, VMamba, Spatial Mamba, and MambaVision backbones for 10min-ahead forecasting on Folsom and a strict matched NREL split. Forecast skill is measured against clear-sky-index smart persistence, and temporal-only rows are reported as weather-history diagnostics rather than as the main ranking criterion. On the Folsom strict split, all evaluated visual-backbone runs improve over smart persistence. In the evaluated single-seed strict runs, VMamba Small and Swin Base reach matched Folsom RMSE values of 65.39 W/m^2 and 65.50 W/m^2; the temporal-only diagnostic reaches 69.51 W/m^2. On the 313-sample NREL strict split, smart persistence remains strongest at 17.48 W/m^2, while the lowest visual RMSE is obtained by Swin Tiny at 23.76 W/m^2. These results provide a reproducible encoder comparison under one fixed multimodal operating point rather than establishing architecture-level dominance, statistically resolved ranking, or fully optimized forecasting performance. Code available here: https://github.com/Oshadha345/irradiance_benchmark

With rising global energy demand and growing awareness of climate change and its impacts, the share of renewable energies in the global energy mix continues to grow. Unlike conventional power generation, the output of renewable energy sources cannot be controlled as consistently due to their dependence on environmental conditions. Therefore, reliable prediction of current and future energy production is essential. In this paper, we report findings from two structured literature reviews on real-world renewable energy prediction tasks: wind turbine power curve modeling and photovoltaic power prediction. For the former, we conducted a comprehensive literature review ourselves, while for the latter, we synthesize the key findings regarding frequently selected input features based on an existing survey. Across both domains, our analysis reveals that despite the large number of available monitoring and environmental variables, only limited or unsystematic methods for feature selection exist. To address this gap, we propose Cluster-based Sequential Feature Selection (CSFS), a novel, model-agnostic, clustering-based wrapper method for automatic, efficient, and reliable feature selection in renewable energy prediction pipelines. To support reproducibility and reuse, we provide an open-source implementation of CSFS on GitHub. We empirically evaluate the proposed approach on both use cases and compare it with established feature selection techniques such as wrapper-based sequential feature selection (SFS), filter-based methods, and Random Forest's embedded feature importance. The results show that the wrapper-based methods overall provide better-performing selections of features. CSFS achieves a predictive performance comparable to SFS while reducing computational cost by an average of 21%.

Engineering use of AI forecasting models requires not only high nominal accuracy but also predictable behavior under uncertain inputs. In photovoltaic (PV) forecasting, this requirement is especially challenging because numerical weather prediction (NWP) errors are temporally correlated, state dependent, and physically coupled across variables. Existing evaluations, however, often rely on perfect forecast assumptions or simplistic perturbations that do not reflect these characteristics. This study presents a physically constrained robustness evaluation framework based on simulation, using virtual PV power as a controlled response variable to isolate the propagation of input uncertainty from confounders at the plant level. Six representative machine learning and deep sequence models, including PatchTST, GRU, N-HITS, and LightGBM, are evaluated under dynamic NWP perturbations with heteroscedasticity modulated by clear-sky conditions and Erbs reconstruction that preserves radiation consistency. The results show that sequence models provide stronger noise filtering and temporal resilience than a strong tabular baseline under medium to high disturbance regimes. SHapley Additive exPlanations (SHAP) and Integrated Gradients (IG) further support a feature reallocation tendency at the case level, in which predictive reliance shifts from corrupted future forecasts toward more stable historical observations and deterministic physical priors. A Pareto analysis of accuracy under clean conditions, robustness, and computational latency then translates these findings into engineering implications for robustness assessment and model selection under forecast uncertainty.

Reliable uncertainty quantification is essential for integrating solar and wind generation into modern power systems, where operators must weigh risk rather than act on point forecasts alone. Existing probabilistic methods, however, often either lack finite-sample validity or require per-site recalibration, so a single model rarely transfers across the diverse climates of a dispersed generation fleet. This paper proposes a heteroscedastic, asymmetric, group-conditional split-conformal framework built on a bootstrap-diverse XGBoost ensemble, producing prediction intervals that adapt in width to local difficulty while retaining distribution-free coverage guarantees. A single fixed specification, with no per-site or per-horizon tuning, is evaluated across four climatologically distinct sites spanning both hemispheres, at horizons of 1 to 12 hours, for both solar irradiance and wind speed. The framework holds near-nominal coverage on both targets and reduces the Interval Score by up to 35% relative to competitive baselines, with the calibration and sharpness of its intervals shown to be properties of the method rather than of site-specific tuning.

Accurate photovoltaic (PV) power forecasting is essential for reliable grid dispatch and renewable energy integration, yet it remains challenging because PV generation is jointly shaped by weather variability, day-night transitions, regime-dependent dynamics, and strict physical constraints. We propose PARA-PV, a Physics-Aware Retrieval-Augmented framework that embeds physical knowledge throughout the forecasting process. The framework first encodes multivariate PV observations into patch-level representations and, through a physics-aware retrieval-augmented learner, retrieves historical patches and analog trajectories that are consistent with the current window in temporal shape, power level, PV operating state, and intra-day period; this yields a physically grounded base forecast. To supplement local memory with broader temporal knowledge, the base forecast is then calibrated against a frozen Chronos time-series foundation-model prior through a lightweight residual adapter, so that general temporal regularities are adapted to PV-specific dynamics without overriding the physically grounded prediction. Because residual conditional distribution shifts persist when weather and diurnal regimes change, a physics-aware distribution shift correction module subsequently adjusts the preliminary forecast using power, weather, timestamp, and day/night conditions, applying gated mean-shift and scale corrections selectively. Finally, a physics-constrained loss function partitions the samples into peak, ramping, night-time, and regular regimes and adaptively reweights their error contributions, preventing the dominant regular regime from suppressing learning of operationally critical states. Our code is available at https://github.com/weican1103/PARA-PV.

At commissioning time, Photovoltaic (PV) operators must forecast production before target-site observations are available, limiting the direct use of standard supervised forecasters. This cold-start setting is addressed with a zero-shot pipeline that generates a synthetic production history from plant metadata and meteorological covariates, enabling time-series foundation models (TSFMs) to forecast through inference-time conditioning. Five TSFMs are benchmarked against classical baselines under strict Cold-Start Baseline, Real Feedback, and Self-Forecast Feedback strategies. The evaluation spans $440$ PV sites across four datasets and diverse climate regimes. Covariate-aware foundation models outperform baselines by approximately $1.7-2\times$: TabPFN-TS achieves the lowest error under Real Feedback (MAE $0.514$, RMSE $0.721$ $kWh$ ${kWp}^{-1}$ ${d}^{-1}$), while Chronos-2 is most robust under Self-Forecast Feedback. Performance is largely insensitive to the synthetic-history source, indicating that accuracy is driven more by the availability of plausible temporal context than by the specific generator.

Ultra-short-term solar irradiance prediction is critical for photovoltaic system dispatch and power grid stability. Existing approaches suffer from three key shortcomings: single time-series models cannot capture the spatial dynamics of clouds under complex conditions, standard convolutions inadequately represent multi-scale cloud features, and fixed low-frequency compensation strategies fail to adapt to different prediction steps. To address these issues, this proposes a multi-source data fusion model for ultra-short-term irradiance prediction. The model first employs InceptionNeXt to extract multi-scale, multi-directional spatial features from ground-based cloud images. A step-adaptive low-frequency compensation unit is then introduced to dynamically modulate global low-frequency information based on the prediction step. Eventually, the enhanced image features are combined with meteorological time-series features, and a TempAttnLSTM network captures global temporal dependencies for multi-step prediction. Experiments on the public NREL dataset and practical photovoltaic stations in Shandong illustrate the effectiveness of the proposed method compared with several state-of-the-art approaches.

The use of residential photovoltaics has increased dramatically in recent years. With battery systems becoming more affordable, the optimal operation of a photovoltaic-battery system can bring significant savings to households. Optimal control requires correct forecasts of underlying parameters, such as photovoltaic power generation, to schedule the battery. While forecasting models have become increasingly accurate due to algorithmic advances and data availability, accuracy is typically measured in generic metrics which might not align with the downstream application. This study proposes a decision-focused learning framework that integrates optimization and prediction by training a Long Short-Term Memory photovoltaic energy forecaster on the downstream optimal scheduling of a battery system. The proposed methodology is compared against a standard two-phase approach. Across a 14-month evaluation period, the decision-focused method reduced average electricity costs across twenty buildings by 3.6% when normalized against performance bounds defined by a perfect forecast and a baseline of no optimization. Critically, this financial improvement was achieved despite the model exhibiting a root mean squared error of 19.9%, significantly higher than the decoupled model's 8.2%. Warm-starting the decision-focused model further improves results, lowering average cost by approximately 8%, while also mitigating the negative impact on statistical accuracy (root mean squared error of 13.7%). The findings are statistically significant at the 0.001 level across the twenty households and for each household individually. These results demonstrate that aligning forecast models with optimization goals is key for achieving cost advantages in PV-battery systems. Future research should replicate these findings on other datasets, alternate forecasting models and alternate optimization algorithms.

In this paper, we propose a novel conditional diffusion-based framework for multivariable time-series solar power forecasting. The proposed method reformulates temporal PV data as structured two-dimensional representations (images) using a sliding-window patch construction, enabling the application of Denoising Diffusion Probabilistic Models (DDPM) within a unified spatiotemporal learning paradigm. A key contribution of this work is the formulation of solar forecasting as an inpainting problem, where future time steps are treated as missing regions to be reconstructed. This is achieved through a mask-based conditional diffusion mechanism, in which historical observations are preserved as conditioning context while the target (future) region is progressively corrupted and subsequently recovered via reverse diffusion. The model learns to generate coherent future sequences conditioned on observed data, effectively performing time-series inpainting. To fully utilize all available features and ensure compatibility with U-Net architectural constraints, a zero-padding strategy is introduced to construct fixed-size inputs. The model is trained using a supervised denoising objective to predict injected noise, enabling accurate iterative reconstruction during the reverse process. Extensive experiments conducted on benchmark PV dataset, including GEFCom2014, demonstrate that the proposed approach achieves high forecasting accuracy, particularly for short-term horizons. The results highlight the effectiveness of integrating diffusion-based generative modeling with an inpainting formulation for robust, flexible, and high-fidelity solar power forecasting.

Reliable forecasting of renewable energy generation is a foundational requirement for grid stability energy trading battery scheduling and carbon aware operational planning Solar and wind resources are inherently intermittent their output fluctuates with cloud cover wind speed atmospheric turbulence seasonal patterns and local terrain The proliferation of IoT and edge devices spanning smart meters inverters anemometers pyranometers weather stations and grid interface sensors has created an unprecedented volume of real time operational data that conventional forecasting pipelines are ill equipped to exploit fully This review investigates how large language model LLM agents can enhance renewable energy forecasting by integrating heterogeneous sensor streams weather API data historical generation records grid constraints and contextual reasoning into unified decision support workflows We survey classical forecasting methods statistical time series models deep learning architectures physics hybrid approaches and emerging LLM agent frameworks for explanation uncertainty communication and operator guidance A six layer taxonomy is proposed covering data acquisition preprocessing feature engineering model inference uncertainty estimation and natural language reporting The review identifies twelve open challenges spanning real time deployment model drift under distribution shift uncertainty quantification hallucination control in LLM agents interoperability of edge hardware and integration with energy management systems The paper concludes by recommending a research agenda centred on open benchmarks physics informed LLM grounding and federated forecasting architectures

The rapid global expansion of solar photovoltaic (PV) capacity-reaching a record 597 GW in 2024-highlights the urgent need for robust forecasting models to mitigate the grid instability caused by the intermittent nature of solar irradiance. While deep learning-based direct forecasting using ground-based sky images (GSI) has emerged as a dominant approach, existing literature is often constrained by single-architecture evaluations and an exclusive focus on single-horizon (point) prediction. This paper proposes a transition from traditional single-horizon estimation toward a multi-horizon forecasting framework, leading to an architecture-independent improvement in accuracy. We hypothesize and demonstrate experimentally that joint optimization over a sequence of future values allows deep neural networks to better capture latent inter-step temporal dependencies by avoiding precocious convergence of the network in terms of both weight gradients and filter diversity. Leveraging this architecture-independent improvement that integrates sequential sky imagery with historical PV generation data, we evaluate the models' abilities to predict power output across multiple discrete future time steps simultaneously. Our methodology is validated through a comparative analysis across diverse deep learning architectures. The results demonstrate that this multi-horizon approach significantly enhances predictive accuracy and robustness across the entire forecast horizon while maintaining computational parsimony. By achieving superior performance with negligible overhead compared to single-horizon models, this work provides a scalable and efficient solution to improve the resilience of modern power grids.

Reliable short horizon forecasting of solar and wind generation is a structural prerequisite of any modern power system yet most published forecasters are tuned and evaluated on a single climatic regime and most algorithmic novelty has been concentrated either on classical recurrent networks or on monolithic foundation models that combine forecasting and explanation We develop a four stage hybrid framework that separates these concerns The first stage acquires hourly generation irradiance and surface weather records through public application programming interfaces The second stage trains three classical baselines autoregressive integrated moving average gradient boosted regression trees and a two layer long short term memory network and produces a strong point forecast together with a residual error series The third stage corrects the residual through a quantum inspired variational kernel built on a six qubit hardware efficient ansatz with three repeated entangling layers The fourth stage uses generative artificial intelligence strictly as an explainability layer that reads the measured benchmark numbers and produces a structured natural language interpretation Across three regions drawn from open public archives Iberian solar North Sea wind and a mixed Texas trace the proposed configuration stays within one percentage point of the strongest classical baseline on the in domain forecasting task and the quantum inspired kernel separates calm and stormy weather regimes with a Fisher discriminant ratio approximately fifteen fold higher than a tuned radial basis kernel

Accurate forecasting of solar power output is essential for efficient integration of renewable energy into the grid. In this study, an attention-based deep learning model, inspired by transformer architecture, is used for short-term solar power forecasting. Our proposed model, "SolarTformer", is designed to predict solar power output from meteorological data. Unlike traditional models, SolarTformer leverages self-attention mechanisms to effectively capture temporal dependencies and spatial variability in solar irradiance. In addition, the proposed methodology includes feeding power station-specific metadata into the model, which helps to generalize between power stations located at different locations and with different panel configurations and in different seasons. Our experiments demonstrate that SolarTformer significantly outperforms previous models on the same data set. In particular, the model exhibits strong performance on both clear and cloudy days, indicating high robustness and generalizability. These findings highlight the potential of attention-based architectures in enhancing the accuracy of solar forecasting, contributing to a more reliable management of renewable energy.

Solar panels are increasingly deployed in cities on rooftops, walls, and urban infrastructure. Although the panel costs have fallen in recent years, the soft costs of installing them have not. These soft costs include assessing the illumination (irradiance) of a panel, which is typically performed using a 3D model that fails to capture small nearby structures that impact the irradiance. Our approach uses a single image taken at the panel's location to forecast its irradiance at any time in the future. We use visual cues in the image to find the camera's orientation and the portion of the sky visible to the panel in order to forecast the irradiance due to the sun and the sky. In addition, we show that the irradiance due to reflections from nearby buildings varies smoothly over time and can be forecasted from the image. This approach enables assessing the solar energy potential of any surface and forecasting the temporal variation of a panel's irradiance. We validate our approach using real irradiance measurements in urban canyons. We show that our approach often yields more accurate irradiance forecasts compared to conventional irradiance-based transposition methods and 3D model-based simulations. We also show that a single spherical image can be used to find the best fixed orientation of a panel. Finally, we present Solaris, a device to capture the image seen by a panel in a variety of urban settings.