UAV Remote Sensing

Low-light UAV-based RGB-infrared oriented small-vehicle detection is important for nighttime traffic monitoring, emergency response, and urban inspection. Illumination variations, headlight glare, local shadows, and thermal-response degradation cause spatially varying modality reliability, while the small visual extent of vehicles further weakens boundaries, orientation cues, and thermal responses. Accordingly, selecting trustworthy observations based on local modality reliability while further exploiting complementary discriminative information in regions with ambiguous modality preference is key to constructing effective multimodal representations. Based on this insight, we propose ReDiffNet, a reliability-conditioned differential representation network in which modality reliability guides both evidence selection and complementary recovery. Specifically, degradation-aware reliability learning estimates relative spatial reliability, uncertainty-guided differential recovery exploits cross-modal differences to recover complementary cues in ambiguous regions, and reliability-conditioned reconstruction integrates retained and recovered evidence into a unified representation. ReDiffNet achieves 85.3% and 73.9% mAP50 on DroneVehicle and VEDAI, respectively, supporting its effectiveness.

Unmanned aerial vehicle (UAV) photogrammetry is increasingly used in applications requiring high accuracy, such as determining ground surface changes caused by landslides, mining, or microrelief transformation. While acquisition strategies have been widely studied, the influence of the processing workflow-particularly Bundle Block Adjustment parameter settings-remains insufficiently explored. This study addresses this gap through a systematic, full-factorial evaluation of 768 processing variants applied to ten UAV datasets collected over 1.5 years in a 220 ha study area. Eight key parameters were analysed. The results show substantial variability in final 3D accuracy: the best performing variant achieved a root mean square error (RMSE) of 16 mm, whereas the weakest reached 303 mm. The most influential factors were the number of ground control points, the application of additional camera calibration corrections, and the use of the Post-Processing Kinematic GNSS method for determining camera projection center coordinates. The study also evaluates how workflow optimization affects the accuracy of displacement, tilt changes, and horizontal strain determination. While random displacement errors remained stable (RMSE of ~6-7 mm), systematic errors were significantly reduced by over half in all axes, with vertical median absolute error decreasing from 14 mm to 7 mm in the optimized configuration compared to the baseline previously used by the authors. This study provides the first large-scale, practice-oriented assessment of how processing parameter selection shapes the accuracy of both photogrammetric products and deformation indices determination. The results offer actionable guidance for developing more robust and repeatable UAV photogrammetry workflows tailored to high-precision monitoring.

This study compared classifiers that differentiate between urbanized and non-urbanized areas based on unmanned aerial vehicle (UAV)-acquired RGB imagery. The tested solutions in-cluded numerous vegetation indices (VIs) thresholding and neural networks (NNs). The analysis was conducted for two study areas for which surveys were carried out using different UAVs and cameras. The ground sampling distances for the study areas were 10 mm and 15 mm, respectively. Reference classification was performed manually, obtaining approximately 24 million classified pix-els for the first area and approximately 3.8 million for the second. This research study included an analysis of the impact of the season on the threshold values for the tested VIs and the impact of image patch size provided as inputs for the NNs on classification accuracy. The results of the con-ducted research study indicate a higher classification accuracy using NNs (about 96%) compared with the best of the tested VIs, i.e., Excess Blue (about 87%). Due to the highly imbalanced nature of the used datasets (non-urbanized areas constitute approximately 87% of the total datasets), the Mat-thews correlation coefficient was also used to assess the correctness of the classification. The analysis based on statistical measures was supplemented with a qualitative assessment of the classification results, which allowed the identification of the most important sources of differences in classification between VIs thresholding and NNs.

This article introduces an algorithm that uses a U-Net architecture to determine vertical ground surface displacements from unmanned aerial vehicle (UAV)-photogrammetry point clouds, offering an alternative to traditional ground filtering methods. Unlike con-ventional ground filters that rely on point cloud classification, the proposed approach em-ploys heteroscedastic regression. The U-Net model predicts the conditional expected val-ues of the elevation corrections, aiming to reduce the impact of vegetation on determined ground surface elevations. Concurrently, it estimates the logarithm of the elevation cor-rection variance, allowing for direct quantification of the uncertainty associated with each elevation correction value. The algorithm was evaluated using three metrics: the root mean square error (RMSE) of vertical displacements, the percentage of nodes with deter-mined displacement values, and the percentage of outliers among those values. Perfor-mance was assessed using the technique for order of preference by similarity to ideal so-lution (TOPSIS) method and compared against several ground-filter-based algorithms across four datasets, each including at least two time intervals. In most cases, the U-Net-based approach demonstrated a slight performance advantage over traditional ground filtering techniques. For example, for the U-Net-based algorithm, for one of the test da-tasets, the RMSE of the determined subsidences was 6.1 cm, the percentage of nodes with determined subsidences was 80.5%, and the percentage of outliers was 0.2%. For the same case, the algorithm based on the next best model (SMRF) allowed an RMSE of 7.7 cm to be obtained; for 77.3% of nodes, the subsidences were determined; and the percentage of outliers was 0.3%.

Multimodal Large Language Models (MLLMs) have demonstrated remarkable advances in remote sensing. However, existing remote sensing multimodal reasoning benchmarks exhibit two critical limitations: they rely on (i) template-driven questions, which causes repetitive questions; and (ii) static images that fail to capture the inherent temporal nature of drone/UAV videos. This leaves systematic evaluation of remote sensing video reasoning largely unexplored. To address this gap, we introduce ReVA, a new dataset for remote sensing video question answering, designed to assess spatiotemporal, scene-centric, and reasoning-oriented capabilities of MLLMs. ReVA comprises 2,438 drone videos spanning 18 cities worldwide (580K frames) and 22K high-quality question-answer pairs across 11 challenging QA tasks. We develop a semi-automatic annotation pipeline that leverages Text LLMs and MLLMs for question-answer generation with human verification. We evaluate 23 proprietary and open-source Video LLMs on ReVA, exposing fundamental limitations of current models. These findings position ReVA as a critical benchmark toward better remote sensing video understanding and temporal reasoning capabilities for real-world deployments. Our code and dataset are available at: https://github.com/zyaocoder/ReVA

Open-vocabulary segmentation enables rich semantic perception for UAVs, but frame-wise predictions can remain temporally inconsistent across repeated observations and changing viewpoints. We present PerSeM, a training-free persistent semantic memory framework for long-horizon open-vocabulary UAV mapping. PerSeM associates frame-wise semantic observations with persistent world-space voxels and constructs a majority-based semantic memory, which is conservatively refined through history-preserving spatial refinement, trust-aware replay, and context-guided verification. Experiments on the Forest and UAVScenes benchmarks show that persistent 3D memory provides substantial gains in semantic correctness and temporal stability over frame-wise predictions. Beyond this strong persistent-memory baseline, PerSeM provides consistent additional improvements, improving both semantic accuracy and temporal stability across all five evaluated UAVScenes sequences. Analysis using regions identified independently of the final PerSeM predictions further shows that these gains are concentrated in semantically difficult and temporally unstable regions, where majority-based memory is most likely to remain uncertain. These results demonstrate that persistent 3D aggregation provides a strong foundation for long-horizon semantic mapping, while conservative refinement of uncertain memory states can provide additional improvements without retraining or additional neural-network inference.

UAV-borne imaging has advanced from megapixel to gigapixel sensors, shifting aerial perception from recognizing individual targets to understanding entire dynamic scenes. We characterize this demand as Wide-area Spatio-temporal Scene Understanding (WSTU), which requires wide-area coverage, per-target resolution, and temporal continuity at once, a combination existing datasets lack. To fill this gap, we introduce an ultra-High-resolution (12768x9564) Airborne Remote-sensing Dataset (HARD) annotated at three levels for object detection, multi-object tracking, and scene-level visual question answering. Ultra-high-resolution imagery raises per-frame processing time to seconds. At that scale latency can no longer be ignored in evaluation. Thus, we propose a latency-aware metric for multi-object tracking called streaming-HOTA (s-HOTA). Extensive baseline experiments show how ultra-high-resolution processing reshapes each task. For detection, the end-to-end pipeline affects accuracy and speed as much as the detector itself does. For tracking, high latency charges the association axis far more unevenly than the detection axis, and association is where pipelines diverge. As a result, the pipeline that performs best offline can lose its lead under s-HOTA. For VQA, vision-language models remain weak at cross-frame identity binding and cannot transfer their single-frame gains to it. Together these findings show that the baselines we evaluate fall short of WSTU. HARD provides the data and the systematic baselines to advance it.

Wheat streak mosaic virus (WSMV) is a destructive pathogen of sweet corn and other cereal crops, causing yield losses and complicating early detection because symptoms are spatially variable and subtle. In sweet corn seed production, WSMV also has regulatory importance, as phytosanitary regulations from countries such as New Zealand and Chile require seed lots to be certified virus-free. Visual scouting is unreliable because symptoms can resemble abiotic stress, while enzyme-linked immunosorbent assay (ELISA) is accurate but expensive, labor-intensive, and difficult to scale. We present an automated pipeline for plant-level WSMV detection using unmanned aircraft systems (UAS) multispectral imagery. The framework integrates orthomosaic reconstruction, geospatial alignment, plant extraction, and classification using a Vision Transformer with seven-channel inputs (five spectral bands, NDVI, and NDRE). Using treatment-based labels, the model achieved 89% accuracy on over 6,500 test patches across multiple growth stages. However, ELISA-based ground truth revealed substantial label noise: only a small fraction of sampled plants in inoculated plots were infected. Treatment labels therefore did not reliably represent infection status, and the high accuracy was largely driven by label bias rather than disease detection. Performance decreased markedly against row-level symptom severity and plant-level ELISA labels. Under these higher-fidelity but smaller-sample conditions, both deep learning and classical machine learning showed limited generalization and weak separability between ELISA-confirmed mock-inoculated and infected plants. These results show that UAS-based disease detection is constrained by label fidelity and data availability, emphasizing biologically grounded labels and models aligned with real-world conditions.

Unmanned aerial vehicle facade inspection can combine red, green, and blue (RGB) imagery with thermal measurements to screen surface and subsurface anomalies. However, geometric discrepancies between the sensors and thermal image rendering can obscure spatial correspondence and weak temperature contrasts. This article presents a sensor-level pipeline comprising per-sensor correction, RGB-to-thermal registration, common-support cropping, and signed local contrast encoding of 16-bit radiometric measurements. The encoding preserves the distinction between locally hotter and colder regions and supplies the fourth input channel of a compact single-stream detector. We introduce M3T, a dataset of 674 paired RGB and radiometric thermal samples from five facade-inspection projects covering eight component and anomaly categories. The median residual registration error is 3.384 pixels, and a controlled-displacement analysis characterizes how the local contrast response changes under controlled displacement. Project-grouped four-fold evaluation yields mean average precision of 0.168 over intersection-over-union thresholds from 0.5 to 0.95, using 28.50 billion floating-point operations per image. A separate single-split ablation shows improved delamination detection over RGB-only and alternative thermal inputs, although aggregate accuracy does not improve over RGB alone. Evaluation on RGBT-Tiny shows mixed performance with rendered thermal imagery. These results characterize the category-specific benefits and limitations of aligned radiometric contrast for compact facade screening.

Flat roofs are among the most influential components of the building envelope, governing both structural performance and thermal efficiency, and thereby contributing directly to household energy consumption, carbon emissions, and long-term environmental sustainability. Timely detection of roof defects is essential for reducing heating and cooling losses, preventing moisture-driven degradation such as mold growth, and supporting national climate-change mitigation goals. This paper presents a real-time, Unmanned Aerial System (UAS)-based deep learning framework that autonomously detects defects using live imagery captured during dual-altitude aerial passes. The multi-resolution flight strategy is designed to aid the identification of both small, fine-scale defects and larger structural issues, enabling more comprehensive assessments. To meet the strict computational and power constraints of embedded UAS hardware, the proposed framework integrates a tile-based architecture with a lightweight Convolution Neural Network-Support Vector Machine (CNN-SVM) classifier designed for low-latency onboard inference. The final model-comprising five convolutional layers and four dense layers, the last a linear SVM head, achieved a mean test accuracy of $94.4\%$ ($95\%$ confidence interval $\pm0.4\%$ over three seeds) on a photo-level split ($43,383$ training, $3,869$ validation, and $2,540$ test tiled and augmented images), outperforming GoogLeNet ($89.2\%$) and AlexNet ($79.8\%$). Experimental evaluations using real UAS imagery collected by onsite visits with DJI Matrice 350 RTK drone demonstrate that the system supports rapid, repeatable, and safe roof inspections while reducing human risk, lowering operational costs, and enabling more sustainable building maintenance.

Synthetic training data is crucial for developing vision AI when real-world data is scarce, as in thermal infrared (IR) aerial vehicle detection. While abundant UAV RGB imagery motivates RGB-to-IR translation for data augmentation, unobservable thermal traits (e.g., engine heat) make learning transferable mappings challenging. This work investigates whether modern generative translators can overcome this cross-modal gap to improve infrared vehicle detection on unseen UAV target domains. Translators are trained on paired RGB-IR source datasets and applied to RGB training images from held-out target datasets to generate synthetic IR data. Evaluated methods include supervised GANs, ControlNet-based diffusion models, and foundation-model editing via LoRA. The resulting synthetic IR imagery is used to train RF-DETR vehicle detectors, which are evaluated on unseen IR target test splits across five aerial datasets, with Kust4K and VTUAV serving as target domains. Synthetic IR consistently outperforms RGB and grayscale baselines. Stable Diffusion 3.5 with ControlNet yields the best results, improving mAP from 50.8 to 60.1 on Kust4K and from 25.6 to 38.4 on VTUAV compared to models trained only on source-domain IR data. Increasing output diversity via multiple seeds (+1.1 mAP) and prompt variations (+3.3 mAP) provides additional gains on VTUAV. Although a performance gap to real target IR data remains, generative RGB-to-IR translation effectively mitigates IR data scarcity and improves cross-domain aerial vehicle detection.

Unexploded ordnance (UXO) continues to restrict civilian access, agricultural activity, infrastructure recovery, and environmental remediation in contaminated areas around the world. This study created a multi campaign UAV thermal image data set of inert ordnance, developed a labeled image set from collected imagery, tested object detection models, and identified practical considerations for humanitarian mine action and demining applications. Data were collected during four field campaigns in Tennessee under summer and winter conditions using inert mines, munitions, and other ordnance placed in short grass, tall vegetation, gravel, mulch, rock, compost, and compacted surfaces. Thermal imagery was collected under flight altitutes of 33 m and 15 m. The final source inventory contained 5,855 thermal image label pairs, including 918 positive images and 4,937 background images. After retaining all positive images and downsampling background images, the 33 m dataset contained 420 training and 106 validation images, while the 15 m dataset contained 629 training and 157 validation images. YOLOV11l and RT-DETR-R50 algorithms were trained and evaluated to develop an automated candidate detection model. Practical recommendations include collecting thermal and RGB imagery together, incorporating varied surfaces and background only imagery, considering periods following changes in solar exposure, balancing survey coverage against target pixel representation, calibrating models with representative local data, and retaining qualified human review. The intended use is screening and prioritization for follow on technical survey or EOD assessment, and not a standalone clearance.

Unmanned Aerial Vehicles (UAVs) have emerged as a promising platform for firefighting operations due to their flexibility, low operational cost, and ability to acquire high-resolution imagery in locations that may be difficult or dangerous to access using conventional methods. Recent advances in deep learning have significantly improved the capabilities of UAV-based wildfire monitoring systems. The present work investigates RGB-infrared fusion for binary wildfire segmentation on the FLAME3 dataset. In this Study, RGB and Infrared baselines are compared with three representative fusion strategies across three segmentation architectures, including U-Net, DeepLabV3+, and SegFormer. The key motivation of this work is to analyze the contribution of each modality, evaluate the impact of fusion timing, and examine how different network architectures exploit multimodal information for UAV wildfire delineation. The findings indicate that thermal information plays a dominant role in UAV segmentation and that feature-level multimodal fusion combined with transformer-based architectures offers the most promising direction for future research.

Individual tree measurements derived from Light Detection and Ranging (LiDAR) mounted on Unmanned Aerial Vehicles (UAV) provide valuable information for forest inventory, ecosystem monitoring, and sustainable forest management. Recent advancements in machine learning have increased the demand for annotated datasets to develop and evaluate point cloud-based approaches, especially for individual tree segmentation. However, publicly available annotated UAV-LiDAR datasets in temperate forests are limited. In this article, we present CedarCypress3D, a manually annotated UAV-LiDAR dataset collected in Japanese cedar (Cryptomeria japonica) and Japanese cypress (Chamaecyparis obtusa) plantations in Japan. The dataset consists of UAV-LiDAR point clouds and field survey measurements from 34 circular plots across two sites with different topographic characteristics, along with terrestrial LiDAR point clouds available for a subset of 22 plots. A total of 1,627 trees were measured in the census field survey and manually annotated to match the corresponding trees in the UAV-LiDAR point clouds. For the subset of plots with terrestrial LiDAR data, semantic labels (i.e., stem and non-stem) were additionally assigned to tree points in the UAV-LiDAR data. CedarCypress3D provides high-quality annotated UAV-LiDAR data for developing and evaluating individual tree instance segmentation and semantic segmentation methods in temperate planted forests. The dataset can also support research on tree attribute prediction and multi-platform LiDAR analysis. The dataset is publicly available at https://doi.org/10.5281/zenodo.22168721.

Unmanned aerial vehicle (UAV) infrared image super-resolution aims to recover weak thermal structures for deployment on resource-constrained platforms; lightweight models are therefore preferred, but multi-loss training can be unstable. A common strategy combines pixel-domain and frequency-domain objectives; however, low contrast, limited high-frequency content, and sensor-specific noise often make their gradients weakly aligned or conflicting. To address this optimization ambiguity, we propose Orthogonal Gradient Gaming and Frequency Rectification (OGG-FR), a plug-and-play optimization framework that decomposes the frequency gradient into a redundant parallel component and an orthogonal innovation component relative to the pixel gradient. In the conflict regime, OGG-FR computes a safe base gradient using the Multiple Gradient Descent Algorithm (MGDA) and adds a variance-rectified orthogonal innovation; in the compatible regime, it discards redundant parallel information and injects the orthogonal innovation according to a confidence score estimated from the high-frequency residual. Experimental results on the UAV thermal benchmark show broad gains under BI and BD degradations at $\times 4$ and $\times 8$ scales, while gradient analyses support the effectiveness of the proposed conflict-aware update rule.

Precision nitrogen (N) management (PNM) for cotton requires in-season monitoring of crop growth parameters and N status indicators to decide fertilizer timing, placement, and application rates for optimal canopy development and yield. This study developed remote sensing and machine learning-based methods to estimate cotton dry biomass weight (DBW), plant N uptake (PNU), plant N concentration (PNC), critical N dilution (Nc), and nitrogen nutrition index (NNI) to support PNM. To achieve this, a three-year field-based N-management study was conducted and unmanned aerial vehicle (UAV)-based multispectral images were acquired between early vegetative growth and flowering stages, critical for fertilizer applications. Spatiotemporally consistent spectral and morphological plant features, including plant height (PH) and fractional canopy cover (FCC), provided reliable model training inputs. DBW, PNU, and PNC estimates from simple regression using vegetation indices (VIs), multiple linear regression (MLR) combining VIs, PH, and FCC, and decision-tree models, random forest regression (RFR) and extreme gradient boosting (XGB), combining spectral reflectance, PH, and FCC were evaluated using trial-held-out (THO) and leave-one-year-out (LOYO) validation methods. The best validation accuracies were from RFRTHO (R2 = 0.88 and MAPE = 23.14% for DBW; R2 = 0.84 and MAPE = 20.61% for PNU; R2 = 0.85 and MAPE = 7.82% for PNC) and XGBTHO (R2 = 0.87 and MAPE = 21.91% for DBW; R2 = 0.81 and MAPE = 21.40% for PNU; R2 = 0.86 and MAPE = 7.66% for PNC). Nc was calculated from model estimated DBW and PNC for high-yielding, medium-to-tall cotton varieties grown in the Texas Coastal Plains and validated using ground-truth biomass measurements. NNI derived from XGBTHO outputs performed marginally better than NNI from RFRTHO in identifying N-deficient plots and multi-level N-stress categorization.

Rip currents are recurrent coastal natural hazards that threaten beachgoers and create operational challenges for lifeguards and coastal managers. Reliable monitoring from standard RGB (red-green-blue) imagery acquired by unmanned aerial vehicles (UAVs) remains difficult because hazardous channels often appear as subtle gaps in breaking waves, foam texture, or sediment patterns, and these signatures are affected by illumination, sea state, and environmental noise. This study presents a physically informed coastal environmental monitoring workflow for detecting visually expressed rip-current indicators that integrates wavelet-derived spatial-frequency texture features with deep learning. We evaluate multiple strategies for incorporating Discrete Wavelet Transform features into convolutional architectures, from computationally efficient channel replacement to dual-stream fusion with attention mechanisms. Performance is assessed against a standard RGB baseline using a task specific convolutional neural network for image-level presence classification and a YOLOv8 model for object-level localization. Under the evaluated dataset conditions, integrating wavelet derived texture features improves performance over RGB-only models. The dual-stream architecture achieves the strongest classification performance, exceeding 95% accuracy with high recall, while channel replacement is most effective for YOLOv8 object detection, reaching 94% mAP@50 for localization. Explainable artificial intelligence analyses provide qualitative evidence that the models attend to visually plausible wave-gap regions associated with rip currents. These results suggest that under the conditions of the evaluated dataset, physically informed wavelet integration may support UAV-based decision-support tools for interpretable beach-safety risk mitigation.

Accurate 3D crop monitoring underpins data-driven precision agriculture by enabling field-scale analysis of plant structure, growth dynamics, and management response. Modern 3D reconstruction methods perform strongly on generic benchmarks, but rendered appearance may not translate into metrically and agronomically useful geometry in crop fields. We introduce UAV3DCrop, a public benchmark of repeated multi-angle unmanned aerial vehicle (UAV) crop surveys. It contains 88,830 RGB images at $5280 \times 3956$ pixels, with a ground sampling distance of 3.6-5.8 mm, from 91 scenes spanning corn, soybean, wheat, and oat. Track A evaluates seven scene-optimized methods -- Neural Radiance Field (NeRF) and 3D Gaussian Splatting (3DGS) variants -- on held-out views, photogrammetry-referenced depth, and canopy-height recovery. Track B tests four pretrained feed-forward models on zero-shot camera-pose and geometry estimation. The scene-optimized methods rank differently across the three targets: Splatfacto-big leads appearance, whereas Scaffold-GS leads depth and is statistically tied with Splatfacto for canopy height. Among feed-forward models, MapAnything leads on seven of the eight metrics, while the remaining models vary more across crops and fail severely on absolute scale in a way that alignment conceals. Repeated acquisitions reveal further sensitivities that differ by output type and by model, associated with position within the acquisition sequence and with tie-point multiplicity. Current 3D reconstruction methods are therefore not yet interchangeable for agronomic use: no single method wins on appearance, geometry, and canopy height at once, and only one of four feed-forward models recovers usable metric scale. The dataset is publicly available at https://link-dev.github.io/UAV3DCrop/

The development of vision-based wildfire detection systems for unmanned aerial vehicles is constrained by the limited availability of diverse real-world training images. This paper investigates the impact of dataset composition on embedded real-time UAV wildfire detection using compact YOLO models as a controlled validation family. Four training configurations were evaluated: real non-augmented, real augmented, hybrid non-augmented, and hybrid augmented, where the hybrid sets combine real wildfire images with AI-generated samples. The objective is to determine whether synthetic data mixing and image augmentation improve practical detection performance under resource-constrained deployment conditions. Experimental results show that the best overall operating point was obtained with the real non-augmented dataset, which achieved the strongest balance between recall and mean average precision for UAV-based wildfire detection. The results also show that neither hybridization with synthetic data nor augmentation produced a better final deployment choice. These findings suggest that, for embedded UAV wildfire detection, dataset realism and domain alignment are more valuable than increasing training set size through synthetic expansion.

Unmanned aerial vehicle (UAV)-satellite cross-view geo-localization matches UAV images against satellite imagery and has achieved impressive accuracy on clean (non-degraded) image benchmarks. In real-world flights, however, UAV observations are frequently affected by adverse weather, illumination changes, platform motion, sensor noise, and compression, while the robustness of existing methods under such degradations remains largely unexamined. In this paper, we present UAVSat-Deg, a large-scale robustness benchmark for degraded UAV-satellite geo-localization, comprising University-1652-Deg and SUES-200-Deg. UAVSat-Deg covers 27 corruption types, including 19 core and 8 compound corruptions, at three severity levels, supports bidirectional drone-to-satellite and satellite-to-drone retrieval as well as multi-height UAV acquisition, and contains more than 11.7 million pre-generated corrupted test images. Benchmarking representative methods under this protocol reveals substantial robustness gaps, particularly under severe and compound corruptions. To address this problem, we propose ReLATE, a Reliable Evidence Learning framework with Adaptive Token Evidence Regulation, which realizes reliability-adaptive feature fusion during descriptor construction. ReLATE estimates a structure-smoothed reliability field over visual tokens, aggregates trustworthy local evidence, and adaptively integrates it into query-derived representations; the regulated query representations are then combined with the CLS-token and GeM-pooled branches to form the final cross-view descriptor. Across both test sets and retrieval directions, ReLATE achieves the best average corrupted-test performance among the compared methods while maintaining competitive accuracy on clean images. The code and dataset will be available at https://github.com/JHC626/ReLATE.

Hyperspectral imaging (HSI) is useful for material discrimination, but operational mine screening also depends on how many false alarms must be inspected before targets are found. This paper studies PFM-1 landmine detection in unmanned aerial vehicle (UAV) visible and near-infrared (VNIR) HSI using spectral angle mapper (SAM), matched filter (MF), adaptive coherence estimator (ACE), and constrained energy minimization (CEM). We compare a ground-measured SVC signature, a fully informed in-scene core-pixel signature, and a simulated human-in-the-loop signature bootstrap. Besides receiver operating characteristic area under the curve and average precision, we report target-discovery curves and spatial candidate-review counts. Full-review bootstrapping reaches the fully informed in-scene signature case after all seven target regions are verified, but the required inspection effort varies strongly: ACE confirms all regions in two rounds and nine candidate inspections, whereas the SAM variants need thousands of candidate reviews for their final target locations. Code is available at https://github.com/SagarLekhak/IEEE_WHISPERS_2026_UAV_HSI_PFM1.

Oblique-view urban remote sensing imagery inevitably exhibits geometric projection displacements between building roofs and footprints, leading to significant distortions in spatial structure. Existing approaches either ignore these deformations or handle them implicitly within segmentation-based frameworks, where progress is dominated by general segmentation advances rather than improvements in geometric correction. In this work, we explicitly define roof-to-footprint offset vector (RFOV) extraction as an independent learning task that decouples geometric alignment from semantic segmentation. To support this task, we introduce the Oblique City dataset (ObliCity), the first large-scale benchmark that integrates high-resolution UAV imagery and globally distributed satellite data, covering diverse city morphologies and camera perspectives. Methodologically, we reformulate DragOSM into DragRoof, an ODE-based framework inspired by human annotation behavior. By simulating the continuous process of dragging roofs toward their footprints, DragRoof learns deterministic, geometry-consistent offset fields and adaptively determines convergence through an end token. Extensive experiments on ObliCity demonstrate that DragRoof achieves state-of-the-art RFOV extraction performance, requiring fewer inference steps while delivering superior directional and length accuracy. Our dataset and model establish a principled foundation for studying projection displacement correction in oblique remote sensing imagery. The source code and dataset will be avaliable at https://github.com/likaiucas/DragRoof.

Deploying multiple UAVs for remote sensing enables proportional reductions in mission time, but realizing these benefits requires the fleet to coordinate at runtime: distributing sensing targets, responding to platform failures, and recovering from degraded data quality. In inspection campaigns, where mission value depends on complete coverage and the usability of every capture, a centralized ground-station coordinator is a single point of failure: a lost link or station fault leaves sensing gaps that cannot be filled without operator intervention. We propose the \textbf{SwarmLink}, an inter-agent communication infrastructure that non-invasively extends any existing aerial framework with peer-to-peer coordination capability, without modifying the host system. We apply it to photovoltaic plant inspection as a representative large-scale sensing campaign, extending Aerostack2 with a distributed auction that unifies initial sensing-target allocation, platform-failure recovery, and data-quality-triggered reassignment into a single runtime mechanism. All three disruption scenarios reduce to the same re-auction over remaining targets and active platforms, requiring zero modifications to the Aerostack2 core and no ground-station involvement during the mission.

Recent advances in Multimodal Large Language Models (MLLMs) have significantly improved remote sensing (RS) multimodal understanding. Language-conditioned segmentation is crucial for fine-grained target understanding in Unmanned Aerial Vehicle (UAV) videos. However, this task remains challenging due to the prevalence of small, visually ambiguous targets and dynamic aerial perspectives. In this paper, we propose SkyVLaM, a multimodal large language model for UAV video understanding. SkyVLaM constructs sparse tokens directly from patch-level video representations through a temporal basis perceiver, regularizes the sparse basis to encourage complementary temporal cues, and adaptively selects a temporally coherent dense segment for high-resolution inspection. The resulting sparse and dense tokens are jointly processed by a large language model for query-conditioned segmentation. We further build SkyVid, consisting of SkyVid-VGCG and SkyVid-RVOS for video grounded conversation generation and referring video object segmentation, respectively. SkyVid contains 101 videos, 33.6K frames, and 1.53M pixel-level object instances. Experiments show that SkyVLaM provides a more effective allocation of the visual token budget and improves language-conditioned video segmentation in UAV scenarios.

Air-to-air (A2A) unmanned aerial vehicle (UAV) tracking is fundamental to airborne remote sensing of low-altitude aerial targets. However, the deployment of continuous, real-time tracking systems on UAVs presents significant challenges. In A2A scenarios, traditional frame-based cameras suffer from severe performance degradation under low illumination, overexposure, and high-speed motion owing to their limited dynamic range and fixed temporal sampling. Although event cameras offer a promising alternative with microsecond temporal resolution and a high dynamic range, current research is bottlenecked by two primary issues: 1) the absence of dedicated A2A event-based datasets, and 2) the heavy reliance of existing trackers on GPU acceleration and extensive training data, rendering them impractical for resource-constrained UAVs. To bridge these gaps, we introduce AE-UAV, an air-to-air event-based UAV tracking benchmark. To the best of our knowledge, this is the first airborne-captured event camera dataset for A2A tracking, comprising 178 flight sequences with continuous-time cubic B-spline annotations. Furthermore, we propose the Fast-Slow Frequency-domain Tracking (FSFT) method. This lightweight, training-free framework seamlessly integrates frequency-domain template matching with search region prediction and detection-based drift correction. Extensive experiments demonstrate that FSFT operates at an ultra-fast 420 frames per second (FPS) on CPU-only hardware. It retains 93.97% of the accuracy of state-of-the-art GPU-dependent methods while delivering a 5.32-fold effective speedup and exhibiting superior temporal resolution generalization, thereby providing a highly efficient and robust solution for airborne remote sensing of aerial targets. The dataset and source code are available at https://github.com/MSP-xEN/AE-UAV.

Although self-supervised learning (SSL) offers a promising way to reduce annotation effort in close-range remote sensing, its effectiveness for high-resolution multispectral unmanned aerial vehicle (UAV) imagery remains underexplored due to limited data. This study evaluated SSL pretraining for precision agriculture using cm-scale multispectral drone imagery collected across multiple sensors, years, and regions. Transformer-based encoders were pretrained with Momentum Contrast v3 (MoCo-v3) and Masked Autoencoders on a harmonized dataset combining msuav500K with newly collected multi-year UAV imagery from agricultural fields in Finland. Pretraining used four spectral bands (Green, Red, Red-Edge, Near-Infrared) for cross-sensor compatibility. The models were evaluated on crop-weed semantic segmentation using the WeedMap dataset with 5--100% training data. The following two subsets served as downstream tasks: Task A (Germany, RedEdge-M), where all pretrained models were compared under partial and full fine-tuning, and Task B (Switzerland, Sequoia), where the best encoder from Task A was assessed. Our Swin Transformer pretrained with MoCo-v3 achieved the strongest performance on both tasks, surpassing the Swin Transformer model of Doornbos et al. pretrained on a pre-release of msuav500K. Our pretrained Swin Transformer further demonstrated cross-sensor and cross-region generalization. We additionally provide a public multi-year multispectral UAV dataset from Finland to support future research.

UAV-based vehicle re-identification (ReID) has emerged as a promising technique for traffic surveillance, urban monitoring, and public-safety applications thanks to the flexible viewpoints and wide-area coverage provided by unmanned aerial vehicles. However, despite recent progress on UAV-based vehicle ReID benchmarks, the robustness of existing methods under adverse weather remains insufficiently studied. This is important because weather degradation can significantly affect the fine-grained appearance cues required for reliable vehicle matching in aerial imagery, especially under small object scale, viewpoint variation, and complex backgrounds. In this paper, we present a controlled comparative study of three representative recent vehicle ReID methods, namely CLIP-ReID, MSINet, and AdaSP, on two UAV-based benchmarks, VRU and UAV-VeID. To ensure consistent robustness evaluation, we generate synthetic foggy and rainy variants of both datasets using an analytical weather-effect pipeline while preserving the original identities and data splits. All methods are then trained and evaluated under matched clean, foggy, and rainy conditions. Experimental results show that adverse weather consistently degrades retrieval performance across both datasets, with rain causing larger drops than fog in nearly all settings. Among the evaluated methods, AdaSP demonstrates the strongest robustness, achieving 93.0% and 88.5% mAP on VRU-Large, and 88.7% and 76.2% mAP on UAV-VeID-Test under foggy and rainy conditions, respectively. Overall, our findings show that simulated adverse weather substantially increases the difficulty of UAV-based vehicle ReID, reveals clear robustness differences among recent methods, and highlights the need for weather-aware model design and evaluation protocols in future aerial ReID research. The code is released at https://github.com/tranminhvu945/Benchmarking-ReID.

Tree crowns are a challenging target for resilient AI because they are not static objects: their spectral response, internal texture, translucency, and apparent boundaries change substantially across the growing season. We develop PhenoEmbed, a self-supervised crown-centric temporal embedding model trained with contrastive and masked reconstruction objectives on HeideBench, an 18-date UAV multispectral time-series benchmark for forest crown phenology in D{ö}lauer Heide. The model treats seasonal crown dynamics as phenological appearance change driven by leaf emergence, canopy closure, senescence, and leaf-off conditions. Segmented tree crown polygons are retained as object anchors to extract aligned crown-centered crops through time, allowing one 256-dimensional vector summarizing seasonal crown appearance to be learned per tree. On 5,885 crop-safe crowns, the exported embeddings show structured low-dimensional organization, with the first two principal components explaining 25.1% of variance and nearest-neighbor retrieval producing a median top-1 cosine similarity of 0.946. Compared with handcrafted temporal features and a learned mean-pooling baseline, PhenoEmbed yields substantially more compact nearest-neighbor structure, while ablations show that the contrastive loss, masked reconstruction loss, and explicit seasonal time features each affect the structure of the learned embedding space. These results support PhenoEmbed as a reusable forest crown representation learner and motivate future downstream tests of whether such features improve tree-level models under seasonal change.

Reliable terrain understanding is a prerequisite for autonomous robot navigation. Yet, the widespread RGB-based perception can fail under low illumination, shadows, and material ambiguities. In this work we propose DRIFT, a lightweight multispectral framework that combines raw spectral bands and illumination-tolerant band-ratio representations through a dual-stream residual architecture and a differential fusion branch. Band ratios attenuate multiplicative acquisition effects (illumination/sensor gains), while the differential fusion explicitly highlights discrepancies between absolute-band and ratio-derived cues, which improves the robustness to noisy or partially unreliable spectral measurements. In the paper (i) we evaluate DRIFT on a new oil-on-soil multispectral dataset acquired using a MicaSense RedEdge-P camera mounted on an Unmanned Aerial Vehicle, and (ii) we provide an additional controlled study on water-on-grass under varying illumination and thermal perturbations (hot/cold water) to analyze NIR-sensitive effects. DRIFT consistently improves over strong baselines, while remaining compatible with edge deployment.

Unmanned aerial vehicles (UAVs) increasingly rely on visual grounding capabilities to localize task-relevant targets from diverse instructions in complex aerial scenes. Existing referring expression comprehension (REC) benchmarks and methods, however, are largely built around text-only queries and single-object outputs, which limits their applicability to practical UAV scenarios involving reference images, multimodal instructions, absent targets, and multiple valid target instances. To address this gap, we introduce \emph{Universal Referring}, a generalized UAV referring task that jointly expands the query modality and the output cardinality. We construct \emph{UniRef-UAV}, a multimodal benchmark that supports text-only, image-only, and text+image queries with modality-dependent target cardinality, where text-only and text+image queries admit no-target, single-target, and multi-target grounding while image-only queries focus on existence-aware single-instance grounding. It also provides in-domain and cross-domain evaluation protocols for visual-query generalization. We further present \emph{UAV-URNet}, a detection-style baseline that maps heterogeneous queries into a shared query space and predicts variable-size target sets through set prediction. Extensive experiments show that UAV-URNet provides a stable and reproducible baseline with more consistent no-target discrimination and a more lightweight, reproducible implementation than large general-purpose MLLMs. Additional domain analysis, query-representation analysis, and ablation studies demonstrate that multimodal queries help reduce visual-query ambiguity and promote a more unified query--target alignment space. The annotations, visual query crops/images, train/validation/test splits, evaluation scripts, and baseline code will be made publicly available to facilitate reproducible research.