Mobile Networks

Radio astronomy plays a crucial role in understanding the universe, particularly within the realm of non-thermal astrophysics. Images of celestial objects are derived from the signals (called visibility) measured by radio telescopes. Such imaging results, called dirty images, contain artifacts due to factors such as sparsity and therefore require reconstruction to improve imaging quality. Existing methods typically restrict reconstruction to a unimodal domain, either to the dirty image after imaging or to the sparse visibility prior to imaging. Focusing solely on each unimodal reconstruction results in the loss of complementary in-context information in either the visibility or image domain, leading to an incomplete modeling of mutual dependency and consistency. To address these challenges, we propose CDCRec, a multimodal radio interferometric data reconstruction method that explicitly models cross-domain consistency. We design a hierarchical multi-task and multi-stage framework to enhance the exploration of interplays between domains during reconstruction. Our experimental results demonstrate that CDCRec improves imaging performance through enhanced cross-domain correlation extraction. In particular, our self-supervised complementary modeling strategy is better than current methods at interferometric domain translations that rely heavily on recovering dense information from constrained source-domain data.

M-MIMO is one of the crucial technologies for increasing spectral and energy efficiency of wireless networks. Most of the current works assume that M-MIMO arrays are equipped with a linear front end. However, ongoing efforts to make wireless networks more energy-efficient push the hardware to the limits, where its nonlinear behavior appears. This is especially a common problem for the multicarrier systems, e.g., OFDM used in 4G, 5G, and possibly also in 6G, which is characterized by a high Peak-to-Average Power Ratio. While the impact of a nonlinear Power Amplifier (PA) on an OFDM signal is well characterized, it is a relatively new topic for the M-MIMO OFDM systems. Most of the recent works either neglect nonlinear effects or utilize simplified models proper for Rayleigh or LoS radio channel models. In this paper, we first theoretically characterize the nonlinear distortion in the M-MIMO system under commonly used radio channel models. Then, utilizing 3D-Ray Tracing (3D-RT) software, we demonstrate that these models are not very accurate. Instead, we propose two models: a statistical one and an ML-based one using 3D-RT results. The proposed statistical model utilizes the Generalized Extreme Value (GEV) distribution to model Signal to Distortion Ratio (SDR) for victim users, receiving nonlinear distortion, e.g., as interference from neighboring cells. The proposed ML model aims to predict SDR for a scheduled user (receiving nonlinear distortion along with the desired signal), based on the spatial characteristics of the radio channel and the operation point of each PA feeding at the M-MIMO antenna array. The predicted SDR can then be used to perform PA-aware per-user power allocation. The results show about 12% median gain in user throughput achieved by the proposed ML-based power allocation scheme over the state-of-the-art, fixed operating point scheme.

While large language models (LLMs) show strong performance in natural language understanding and generation, their evaluation and adaptation to domain-specific constraints in telecommunications customer support remain limited. In addition, data sovereignty, regulatory constraints, and the handling of sensitive customer and network information complicate the use of externally hosted foundation models in this domain. We present a systematic study of parameter-efficient fine-tuning (PEFT) using Low-Rank Adaptation (LoRA) applied to Qwen2.5-3B to build a domain-specific conversational assistant. We introduce a combinatorial synthetic data generation approach based on a glossary of 52 industry-specific terms, producing approximately 30,000 training examples across 1,560 distinct problem scenarios via a generative pipeline powered by Gemini 2.0 Flash. We evaluate 16 LoRA configurations by varying hyperparameters and target modules. Our evaluation extends beyond standard metrics by incorporating energy consumption analysis and qualitative assessment using an LLM-as-a-judge framework with GPT-5.2 and Claude 4.5 Sonnet. Results show a clear divergence between quantitative and qualitative performance: models achieving the lowest validation loss do not necessarily obtain the best human-aligned rankings. The best validation loss (0.5024) ranks only 6th-7th in qualitative evaluation, while the worst loss (0.6807) ranks first according to both judges. This work contributes (1) a combinatorial method for synthetic dataset construction, (2) insights into the impact of target module selection for LoRA injection, (3) evidence that validation loss alone is insufficient for selecting fine-tuning configurations in conversational AI, and (4) an energy-performance trade-off analysis for sustainable LLM deployment.

AIGC has shown remarkable success in CV and NLP, and has recently demonstrated promising potential in the wireless domain. However, significant data imbalance exists across RF modalities, with abundant WiFi data but scarce mmWave and RFID data due to high acquisition cost. This makes it difficult to train high-quality generative models for these data-scarce modalities. In this work, we propose RF-CMG, a diffusion-based cross-modal generative method that leverages data-rich WiFi signals to synthesize high-fidelity RF data for scarce modalities including mmWave and RFID. The key insight of RF-CMG is to decouple cross-modal generation into high-frequency guidance and low-frequency constraint, which respectively learn high-frequency distribution from limited target modality data and preserve the underlying physical structure via low-frequency constraints during generation. On this basis, we introduce a Modality-Guided Embedding (MGE) module to steer the reverse diffusion trajectory toward the target high-frequency distribution, and a Low-Frequency Modality Consistency (LFMC) module to progressively enforce low-frequency constraints to suppress the accumulation of source-modality structural biases during inference, enabling high-quality target-modality generation. Performance comparison with several prevalent generative models demonstrates that RF-CMG achieves superior performance in synthesizing RFID and mmWave signals. We further showcase the effectiveness of the data generated by RF-CMG in gesture recognition tasks, and analyze the impact of the proportion of synthetic data on downstream performance.

Traffic simulations, essential for planning urban transit infrastructure interventions, require vehicle-category-specific origin-destination (OD) data. Existing data sources are imperfect: sparse tollbooth sensors provide accurate vehicle counts by category, while extensive mobility data from cellular network activity captures aggregated crowd movement, but lack modal disaggregation and have systematic biases. This study develops a machine learning framework to correct and disaggregate cellular network data using sparse tollbooth counts as ground truth. The model uses temporal and spatial features to learn the complex relationship between aggregated mobility data and vehicular data. The framework infers destinations from transit routes and implements routing logic to distribute corrected flows between OD pairs. This approach is applied to a bus depot expansion in Trondheim, Norway, generating hourly OD matrices by vehicle length category. The results show how limited but accurate sensor measurements can correct extensive but aggregated mobility data to produce grounded estimates of background vehicular traffic flows. These macro-scale estimates can be refined for micro-scale analysis at desired locations. The framework provides a generalisable approach for generating origin-destination data from cellular network data. This enables downstream tasks, like detailed traffic simulations for infrastructure planning in data-scarce contexts, supporting urban planners in making informed decisions.

We consider the problem of minimizing the convergence time for decentralized federated learning (DFL) in wireless networks under broadcast communications, with focus on mixing matrix design. The mixing matrix is a critical hyperparameter for DFL that simultaneously controls the convergence rate across iterations and the communication demand per iteration, both strongly influencing the convergence time. Although the problem has been studied previously, existing solutions are mostly designed for decentralized parallel stochastic gradient descent (D-PSGD), which requires the mixing matrix to be symmetric and doubly stochastic. These constraints confine the activated communication graph to undirected (i.e., bidirected) graphs, which limits design flexibility. In contrast, we consider mixing matrix design for stochastic gradient push (SGP), which allows asymmetric mixing matrices and hence directed communication graphs. By analyzing how the convergence rate of SGP depends on the mixing matrices, we extract an objective function that explicitly depends on graph-theoretic parameters of the activated communication graph, based on which we develop an efficient design algorithm with performance guarantees. Our evaluations based on real data show that the proposed solution can notably reduce the convergence time compared to the state of the art without compromising the quality of the trained model.

Covert channels (CCs) in wireless chips pose a serious security threat, as they enable the exfiltration of sensitive information from the chip to an external attacker. In this work, we propose an AI-based defense mechanism deployed at the RF receiver, where the model directly monitors raw I/Q samples to detect, in real time, the presence of a CC embedded within an otherwise nominal signal. We first compact a state-of-the-art convolutional neural network (CNN), achieving an 80% reduction in parameters, which is an essential requirement for efficient edge deployment. When evaluated on the open-source hardware Trojan (HT)-based CC dataset, the compacted CNN attains an average accuracy of 90.28% for CC detection and 86.50% for identifying the underlying HT, with results averaged across SNR values above 1 dB. For practical communication scenarios where SNR > 20 dB, the model achieves over 97% accuracy for both tasks. These results correspond to a minimal performance degradation of less than 2% compared to the baseline model. The compacted CNN is further benchmarked against alternative classifiers, demonstrating an excellent accuracy-model size trade-off. Finally, we design a lightweight CNN hardware accelerator and demonstrate it on an FPGA, achieving very low resource utilization and an efficiency of 107 GOPs/W. Being the first AI hardware accelerator proposed specifically for CC detection, we compare it against state-of-the-art AI accelerators for RF signal classification tasks such as modulation recognition, showing superior performance.

We study downlink beam and rate adaptation in a multi-user mmWave MISO system where multiple base stations (BSs), each using analog beamforming from finite codebooks, serve multiple single-antenna user equipments (UEs) with a unique beam per UE and discrete data transmission rates. BSs learn about transmission success based on ACK/NACK feedback. To encode service goals, we introduce a satisficing throughput threshold $τ_r$ and cast joint beam and rate adaptation as a combinatorial semi-bandit over beam-rate tuples. Within this framework, we propose SAT-CTS, a lightweight, threshold-aware policy that blends conservative confidence estimates with posterior sampling, steering learning toward meeting $τ_r$ rather than merely maximizing. Our main theoretical contribution provides the first finite-time regret bounds for combinatorial semi-bandits with satisficing objective: when $τ_r$ is realizable, we upper bound the cumulative satisficing regret to the target with a time-independent constant, and when $τ_r$ is non-realizable, we show that SAT-CTS incurs only a finite expected transient outside committed CTS rounds, after which its regret is governed by the sum of the regret contributions of restarted CTS rounds, yielding an $O((\log T)^2)$ standard regret bound. On the practical side, we evaluate the performance via cumulative satisficing regret to $τ_r$ alongside standard regret and fairness. Experiments with time-varying sparse multipath channels show that SAT-CTS consistently reduces satisficing regret and maintains competitive standard regret, while achieving favorable average throughput and fairness across users, indicating that feedback-efficient learning can equitably allocate beams and rates to meet QoS targets without channel state knowledge.

Communication is a core enabler for multi-robot systems (MRS), providing the mechanism through which robots exchange state information, coordinate actions, and satisfy safety constraints. While many MRS autonomy algorithms assume reliable and timely message delivery, realistic wireless channels introduce delay, erasures, and ordering stalls that can degrade performance and compromise safety-critical decisions of the robot task. In this paper, we investigate how transport-layer reliability mechanisms that mitigate communication losses and delays shape the autonomy-communication loop. We show that conventional non-coded retransmission-based protocols introduce long delays that are misaligned with the timeliness requirements of MRS applications, and may render the received data irrelevant. As an alternative, we advocate for adaptive and causal network coding, which proactively injects coded redundancy to achieve the desired delay and throughput, enabling relevant data delivery for the robotic task. Specifically, this method adapts to channel conditions between robots and causally tunes the communication rates via efficient algorithms. We present two case studies: cooperative localization under delayed and lossy inter-robot communication, and a safety-critical overtaking maneuver where timely vehicle-to-vehicle message availability determines whether an ego vehicle can abort to avoid a crash. Our results demonstrate that coding-based communication significantly reduces in-order delivery stalls, keeps cooperative-localization accuracy close to the ideal baseline, and satisfies the overtaking abort deadline in 80% of the simulated runs, compared with 60% for a retransmission-based baseline. The study highlights the need to jointly design autonomy algorithms and communication mechanisms, and positions network coding as a principled tool for dependable MRS operation over wireless networks.

Generative models based on the Flow Matching objective, particularly Rectified Flow, have emerged as a dominant paradigm for efficient, high-fidelity image synthesis. However, while existing research heavily prioritizes generation quality and architectural scaling, the underlying dynamics of how RF models memorize training data remain largely underexplored. In this paper, we systematically investigate the memorization behaviors of RF through the test statistics of Membership Inference Attacks (MIA). We progressively formulate three test statistics, culminating in a complexity-calibrated metric that successfully decouples intrinsic image spatial complexity from genuine memorization signals. This calibration yields a significant performance surge -- boosting attack AUC by up to 15% and the privacy-critical TPR@1%FPR metric by up to 45% -- establishing the first non-trivial MIA specifically tailored for RF. Leveraging these refined metrics, we uncover a distinct temporal pattern: under standard uniform temporal training, a model's susceptibility to MIA strictly peaks at the integration midpoint, a phenomenon we justify via the network's forced deviation from linear approximations. Finally, we demonstrate that substituting uniform timestep sampling with a Symmetric Exponential (U-shaped) distribution effectively minimizes exposure to vulnerable intermediate timesteps. Extensive evaluations across three datasets confirm that this temporal regularization suppresses memorization while preserving generative fidelity.

Recently, visual localization has become an important supplement to improve localization reliability, and cross-view approaches can greatly enhance coverage and adaptability. Meanwhile, future 6G will enable a globally covered mobile communication system, with a space-air-ground integrated network (SAGIN) serving as key supporting architecture. Inspired by this, we explore an integration of cross-view localization (CVL) with 6G SAGIN, thereby enhancing its performance in latency, energy consumption, and privacy protection. First, we provide a comprehensive review of CVL and SAGIN, highlighting their capabilities, integration opportunities, and potential applications. Benefiting from the fast and extensive image collection and transmission capabilities of the 6G SAGIN architecture, CVL achieves higher localization accuracy and faster processing speed. Then, we propose a split-inference framework for implementing CVL, which fully leverages the distributed communication and computing resources of the 6G SAGIN architecture. Subsequently, we conduct joint optimization of communication, computation, and confidentiality within the proposed split-inference framework, aiming to provide a paradigm and a direction for making CVL efficient. Experimental results validate the effectiveness of the proposed framework and provide solutions to the optimization problem. Finally, we discuss potential research directions for 6G SAGIN-enabled CVL.

Open Radio Access Networks (O-RAN) promise flexible 6G network access through disaggregated, software-driven components and open interfaces, but this programmability also increases operational complexity. Multiple control loops coexist across the service management layer and RAN Intelligent Controller (RIC), while independently developed control applications can interact in unintended ways. In parallel, recent advances in generative Artificial Intelligence (AI) are enabling a shift from isolated AI models toward agentic AI systems that can interpret goals, coordinate multiple models and control functions, and adapt their behavior over time. This article proposes a multi-scale agentic AI framework for O-RAN that organizes RAN intelligence as a coordinated hierarchy across the Non-Real-Time (Non-RT), Near-Real-Time (Near-RT), and Real-Time (RT) control loops: (i) A Large Language Model (LLM) agent in the Non-RT RIC translates operator intent into policies and governs model lifecycles. (ii) Small Language Model (SLM) agents in the Near-RT RIC execute low-latency optimization and can activate, tune, or disable existing control applications; and (iii) Wireless Physical-layer Foundation Model (WPFM) agents near the distributed unit provide fast inference close to the air interface. We describe how these agents cooperate through standardized O-RAN interfaces and telemetry. Using a proof-of-concept implementation built on open-source models, software, and datasets, we demonstrate the proposed agentic approach in two representative scenarios: robust operation under non-stationary conditions and intent-driven slice resource control.

We propose a cross-attention Transformer for joint decoding of uplink OFDM signals received by multiple coordinated access points. A shared per-receiver encoder learns the time-frequency structure of each grid, and a token-wise cross-attention module fuses the receivers to produce soft log-likelihood ratios for a standard channel decoder without explicit channel estimates. Trained with a bit-metric objective, the model adapts its fusion to per-receiver reliability and remains robust under degraded links, strong frequency selectivity, and sparse pilots. Over realistic Wi-Fi channels, it outperforms classical pipelines and strong neural baselines, often matching or surpassing a local perfect-CSI reference while remaining compact and computationally efficient on commodity hardware, making it suitable for next-generation coordinated Wi-Fi receivers.

This paper addresses multi-objective conflicts and catastrophic forgetting in uncrewed aerial vehicle (UAV) networks across dynamic spatiotemporal environments. Conventional multi-agent reinforcement learning (MARL) algorithms suffer from severe policy degradation during sequential task transitions. We propose a spatiotemporal continual federated learning (SCFL) framework driven by the group-decoupled multi-agent proximal policy optimization (G-MAPPO) algorithm. SCFL incorporates a three-stage geometric alignment mechanism: it resolves local gradient conflicts via group-decoupled policy optimization (GDPO), mitigates spatial Non-Independent and Identically Distributed (non-IID) client drift through adaptive cosine aggregation, and suppresses inter-task interference via global temporal orthogonal projection without raw experience replay. Evaluations show that SCFL achieves superior robustness over federated baselines, maintaining spatial service reliability above 0.95 and a load balancing index of approximately 0.95 during non-stationary transitions. A longitudinal self-degradation analysis further shows that SCFL preserves historical knowledge with near-zero performance variation in spatial reliability and QoS under moderate loads from 40 to 120 users, while revealing its operating boundary under extreme congestion with 140 users due to hard projection constraints. The framework provides a scalable, communication-efficient approach for autonomous aerial network orchestration.

The deployment of large-scale neural networks within the Open Radio Access Network (O-RAN) architecture is pivotal for enabling native edge intelligence. However, this paradigm faces two critical bottlenecks: the prohibitive memory footprint required for local training on resource-constrained gNBs, and the saturation of bandwidth-limited backhaul links during the global aggregation of high-dimensional model updates. To address these challenges, we propose CoCo-Fed, a novel Compression and Combination-based Federated learning framework that unifies local memory efficiency and global communication reduction. Locally, CoCo-Fed breaks the memory wall by performing a double-dimension down-projection of gradients, adapting the optimizer to operate on low-rank structures without introducing additional inference parameters/latency. Globally, we introduce a transmission protocol based on orthogonal subspace superposition, where layer-wise updates are projected and superimposed into a single consolidated matrix per gNB, drastically reducing the backhaul traffic. Beyond empirical designs, we establish a rigorous theoretical foundation, proving the convergence of CoCo-Fed even under unsupervised learning conditions suitable for wireless sensing tasks. Extensive simulations on an angle-of-arrival estimation task demonstrate that CoCo-Fed significantly outperforms state-of-the-art baselines in both memory and communication efficiency while maintaining robust convergence under non-IID settings.

Accurately predicting the performance of active radio frequency (RF) circuits is essential for modern wireless systems but remains challenging due to highly nonlinear behavior and the high computational cost of traditional simulation tools. Existing machine learning (ML) surrogates often require large datasets to generalize across various topologies or are not accurate on held-out circuits. This work presents a lightweight, data-efficient, and topology-aware graph neural network (GNN) framework for predicting key performance metrics of active RF circuit classes, such as low-noise amplifiers (LNAs), mixers, voltage-controlled oscillators (VCOs), power amplifiers (PAs), and voltage amplifiers (VAs). The proposed framework employs RFIC domain-informed feature indexing to enable cross-topology adaptability by cheap encoding of functional device semantics (e.g., differential pair and varactor transistors) and efficient knowledge transfer. The surrogate model represents circuits using device-terminal graph abstractions to preserve fine-grained connectivity and transistor-level symmetry. The final model is generalized to a wide variety of classes by being trained in parallel. Experimental results demonstrate accurate modeling of multimodal and heavy-tailed RF performance distributions, achieving an average mean relative error (MRE) of 2.71% across nineteen topologies, an improvement of 3.3x and 20x faster in training over prior art, and the generalization to held-out topologies is improved by ~26.2x. Furthermore, this work shows ~36x training data efficiency compared to state-of-the-art, demonstrating its effectiveness for scalable and deployment-ready RF design automation.

Real-time audio-visual speech enhancement (AVSE) is a key enabler for immersive and interactive multimedia services, yet its performance is tightly constrained by network latency, uplink capacity, and computational delay. This paper presents the design, deployment, and evaluation of a complete cloud-edge-assisted AVSE system operating over a public 5G edge network. The system integrates CNN-based acoustic enhancement and OpenCV-based facial feature extraction with an LSTM fusion network to preserve temporal coherence, and is deployed on a Vodafone-compatible AWS Wavelength edge cloud. Through extensive stress testing, we analyze end-to-end performance under varying network load and adaptive multimedia profiles. Results show that compute placement at the network edge is critical for meeting real-time coherence constraints, and that uplink capacity is often the dominant bottleneck for interactive AVSE services. Only 5G and wired Ethernet consistently satisfied the required communication delay bound for uncompressed audio-video chunks, while aggressive compression reduced payload sizes by up to 80% with negligible perceptual degradation, enabling robust operation under constrained conditions. We further demonstrate a fundamental trade-off between processing latency and enhancement quality, where reduced model complexity lowers delay but degrades reconstruction performance in low-SNR scenarios. Our findings indicate that public 5G edge environments can sustain real-time, interactive AVSE workloads when network and compute resources are carefully orchestrated, although performance margins remain tighter than in dedicated infrastructures. The architectural insights derived from this study provide practical guidelines for the design of delay-sensitive multimedia and perceptual enhancement services on emerging 5G edge-cloud platforms.

This paper investigates secure communications in rate-splitting multiple access (RSMA) enabled heterogeneous UAV networks, where multiple UAVs collaboratively serve ground terminals in the presence of eavesdroppers. By jointly considering secrecy rate maximization and propulsion energy consumption minimization, we formulate a multi-objective optimization problem involving UAV trajectory design, service association, power allocation, and secrecy precoding under mobility, collision-avoidance, service-capacity, and communication constraints. The formulated problem is highly non-convex due to the coupling among UAV trajectories, RSMA transmission variables, and secrecy constraints. To address the resulting non-convex and highly coupled optimization problem, we propose a hierarchical optimization framework. The inner layer uses a semidefinite relaxation (SDR)-based S2DC algorithm combining penalty functions and difference-of-convex (D.C.) programming to solve the secrecy precoding problem with fixed UAV positions. The outer layer introduces a Large Language Model (LLM)-guided heuristic multi-agent reinforcement learning approach (LLM-HeMARL) for trajectory optimization. LLM-HeMARL efficiently incorporates LLM-generated expert heuristic policy, enabling UAVs to learn energy-aware, security-driven trajectories without the inference overhead of real-time LLM calls. The simulation results show that our method outperforms existing baselines in secrecy rate and energy efficiency, with consistent robustness across varying UAV swarm sizes and random seeds.

Token communications (TokenCom) is an emerging generative semantic communication paradigm, where tokens serve as compact representation units across modalities. Their contextual dependencies can be exploited by pretrained large models for semantic recovery. In this paper, we propose token-domain multiple access (ToDMA), a large-model-driven semantic multiple access scheme for massive token communications. ToDMA integrates unsourced random access with context-aware token processing. It enables massive uncoordinated devices to transmit tokenized source representations over common uplink resources. Specifically, each token index is associated with a shared modulation codeword, exposing token-level structure to the receiver for context-aware recovery. At the receiver, compressed sensing is first employed to jointly detect active tokens and estimate their corresponding channel state information (CSI) from the superposed signals. The source token sequences are then reconstructed by exploiting the consistency of token-associated CSI across multiple token positions. In the presence of token collisions, some active tokens may remain unassigned, leading to missing entries in the reconstructed token sequences. To recover these tokens, candidate-restricted masked-token prediction is performed using pretrained contextual models, thereby leveraging token-level context to mitigate collision effects. Simulation results on both image and text transmission tasks demonstrate that ToDMA reduces access latency while maintaining favorable token recovery and semantic reconstruction quality, showing its scalability for semantic multiple access.

Sionna is an open-source, GPU-accelerated library that, as of version 0.14, incorporates a ray tracer, Sionna RT, for simulating radio wave propagation. A unique feature of Sionna RT is differentiability, enabling the calculation of gradients for the channel impulse responses (CIRs), radio maps, and other related metrics with respect to system and environmental parameters, such as material properties, antenna patterns, and array geometries. The release of Sionna 1.0 provided a complete overhaul of the ray tracer, significantly improving its speed, memory efficiency, and extensibility. This document details the algorithms employed by Sionna RT to simulate radio wave propagation efficiently, while also addressing their current limitations. Given that the computation of CIRs and radio maps requires distinct algorithms, these are detailed in separate sections. For CIRs, Sionna RT integrates shooting and bouncing of rays (SBR) with the image method and uses a hashing-based mechanism to efficiently eliminate duplicate paths. Radio maps are computed using a purely SBR-based approach for the non-diffracted component, complemented by a stage for diffracted paths.

The growing demand for efficient semantic communication systems capable of managing diverse tasks and adapting to fluctuating channel conditions has driven the development of robust, resource-efficient frameworks. This article introduces a novel channel-adaptive and multi-task-aware semantic communication framework based on a masked auto-encoder architecture. Our framework optimizes the transmission of meaningful information by incorporating a multi-task-aware scoring mechanism that identifies and prioritizes semantically significant data across multiple concurrent tasks. A channel-aware extractor is employed to dynamically select relevant information in response to real-time channel conditions. By jointly optimizing semantic relevance and transmission efficiency, the framework ensures minimal performance degradation under resource constraints. Experimental results demonstrate the superior performance of our framework compared to conventional methods in tasks such as image reconstruction and object detection. These results underscore the framework's adaptability to heterogeneous channel environments and its scalability for multi-task applications, positioning it as a promising solution for next-generation semantic communication networks.

Semantic communications aim to enhance transmission efficiency by jointly optimizing source coding, channel coding, and modulation. While prior research has demonstrated promising performance in simulations, real-world implementations often face significant challenges, including noise variability and nonlinear distortions, leading to performance gaps. This article investigates these challenges in a multiple-input multiple-output (MIMO) and orthogonal frequency-division multiplexing (OFDM)-based semantic communication system, focusing on the practical impacts of power amplifier (PA) nonlinearity and peak-to-average power ratio (PAPR) variations. Our analysis identifies frequency selectivity of the actual channel as a critical factor in performance degradation and demonstrates that targeted mitigation strategies can enable semantic systems to approach theoretical performance. By addressing key limitations in existing designs, we provide actionable insights for advancing semantic communications in practical wireless environments. This work establishes a foundation for bridging the gap between theoretical models and real-world deployment, highlighting essential considerations for system design and optimization.

We present a novel machine-learning (ML) approach (EM-GANSim) for real-time electromagnetic (EM) propagation that is used for wireless communication simulation in 3D indoor environments. Our approach uses a modified conditional Generative Adversarial Network (GAN) that incorporates encoded geometry and transmitter location while adhering to the electromagnetic propagation theory. The overall physically-inspired learning is able to predict the power distribution in 3D scenes, which is represented using heatmaps. We evaluated our method on 15 complex 3D indoor environments, with 4 additional scenarios later included in the results, showcasing the generalizability of the model across diverse conditions. Our overall accuracy is comparable to ray tracing-based EM simulation, as evidenced by lower mean squared error values. Furthermore, our GAN-based method drastically reduces the computation time, achieving a 5X speedup on complex benchmarks. In practice, it can compute the signal strength in a few milliseconds on any location in 3D indoor environments. We also present a large dataset of 3D models and EM ray tracing-simulated heatmaps. To the best of our knowledge, EM-GANSim is the first real-time algorithm for EM simulation in complex 3D indoor environments. We plan to release the code and the dataset.

Machine learning for mobile network analysis, planning, and optimization is often limited by the lack of large, comprehensive real-world datasets. This paper introduces the Vienna 4G/5G Drive-Test Dataset, a city-scale open dataset of georeferenced Long Term Evolution (LTE) and 5G New Radio (NR) measurements collected across Vienna, Austria. The dataset combines passive wideband scanner observations with active handset logs, providing complementary network-side and user-side views of deployed radio access networks. The measurements cover diverse urban and suburban settings and are aligned with time and location information to support consistent evaluation. For a representative subset of base stations (BSs), we provide inferred deployment descriptors, including estimated BS locations, sector azimuths, and antenna heights. The release further includes high-resolution building and terrain models, enabling geometry-conditioned learning and calibration of deterministic approaches such as ray tracing. To facilitate practical reuse, the data are organized into scanner, handset, estimated cell information, and city-model components, and the accompanying documentation describes the available fields and intended joins between them. The dataset enables reproducible benchmarking across environment-aware learning, propagation modeling, coverage analysis, and ray-tracing calibration workflows.