Contact-Rich Robotic Manipulation

Latest papers 263

Jul 16, 2026cs.RO

Beyond Implicit Force: Evaluating Explicit Force-Torque Proxies in Action Chunking with Transformers

Contact-rich manipulation requires policies to infer interaction state from signals that are often weakly observable through vision and kinematics alone. Action Chunking with Transformers (ACT) has shown strong performance in fine-grained manipulation, but many deployments collect demonstrations through leader-follower teleoperation, where tracking error between commanded leader motion and executed follower motion implicitly encodes contact, resistance, and constraint violation. This paper examines whether ACT's apparent force-awareness depends on this hidden interaction cue. We introduce an observation-centric ACT variant that predicts future follower joint states instead of leader commands, thereby removing the teleoperation-induced discrepancy signal while preserving the rest of the learning pipeline. We then evaluate whether simple joint-torque proxies, derived from onboard motor current or joint effort, can recover contact-aware behavior without external force/torque sensors. Across four real-world tasks spanning surface following, insertion, stiffness discrimination, and force-based stopping, removing the implicit cue leads to severe failures in force-critical phases. In contrast, torque-augmented policies recover robust contact behavior and improve the base ACT policy. These results demonstrate that, on real hardware, the implicit teleoperation cue is a recoverable source of force-awareness, where torque signals are available, a simple proxy matches, surpasses, or further enhances it.
Jul 15, 2026cs.RO

Never Too Late for Force: Accelerating VLA Post-Training with Reactive Force Injection

Pretrained vision-language-action (VLA) policies provide strong language-conditioned manipulation knowledge, but they remain largely vision-driven and can struggle once manipulation enters contact states where the scene is occluded, depth is ambiguous, or small force errors push execution off the offline demonstration distribution. We present LIFT (Late Reactive Injection of Force for VLA Post-Training), a force-aware post-training framework that adds contact reactivity to a pretrained VLA policy while preserving its general manipulation knowledge. LIFT grafts a reactive action expert beside the original action expert, initializes it from pretrained action weights, and injects recent 6D end-effector force through causal force memory and zero-initialized cross attention, enabling actions to be refreshed during execution. To address the policy-dependent distribution shift of contact feedback, LIFT further couples reactive force injection with an online DAgger loop that trains on a mixture of offline task-alignment data and human-corrected online rollouts. Across towel folding, book insertion, and Hanoi ring placement, LIFT learns faster and reaches higher performance than vision-only post-training, while ablations show that reactive force memory and online corrective data are both important for robust contact-rich manipulation. Our code is publicly available at https://github.com/y-wng/lift.
Jul 15, 2026cs.RO

Learning Forward & Reverse Skills from a Single Unfinished Demonstration for Constrained Manipulation Tasks

Learning from demonstration (LfD) enables robots to learn manipulation skills directly from expert demonstrations but remains challenging for contact-rich tasks involving geometric constraints and force interaction. Existing approaches typically require multiple complete demonstrations and do not support reverse skill execution. In this paper, we present a unified one-shot framework for constrained manipulation that learns both forward and reverse execution from a single, possibly unfinished demonstration. Our method decomposes demonstrations into non-contact and contact phases, with non-contact motion encoded with dynamic movement primitives (DMP), and contact motion represented as a sequence of screw motion primitives segmented by our proposed geometry-driven twist-direction segmentation algorithm. During execution, screw primitives are executed sequentially under admittance-guided pose correction and speed regulation, enabling task completion beyond the demonstrated trajectory length as well as reverse skill execution without additional learning data. Experiments on peg insertion, battery insertion, lock opening, and screw driving tasks demonstrate improved success rates and robustness over segmentation and one-shot trajectory learning baselines. Details are available on the project website: https://tuwien-asl.github.io/LfD-Screw/.
Jul 13, 2026cs.RO

A Minimalist Retargeting-Guided Reinforcement Learning Recipe for Dexterous Manipulation

Recent work in humanoid whole-body control has found success with a simple recipe: retarget human motion to robot kinematic references, then train policies via reinforcement learning (RL) to track them. But how does this recipe transfer to dexterous manipulation? The answer is not obvious, as manipulation involves complex, contact-rich dynamics and requires delicate regulation of contact modes and forces. We present REGRIND, a minimalist retargeting-guided RL pipeline that learns dexterous manipulation policies from a single human demonstration. REGRIND retargets human hand-object motion to a robot reference that preserves hand-object spatial and contact relationships, trains a residual RL policy in simulation to track object-centric keypoints along that reference, and transfers the resulting policy zero-shot to hardware with careful system identification. The resulting policies produce fluid, human-like behavior on two different multi-fingered hands across contact-rich tool-use tasks, including operating a pair of scissors and turning a screwdriver. Through systematic hardware experiments, we identify and analyze the key factors that govern sim-to-real transfer in dexterous manipulation, offering practical guidance for retargeting-based learning in contact-rich settings. Videos and code are available at https://yunhaifeng.com/REGRIND.
Jul 13, 2026cs.RO

Towards Human-level Dexterous Teleoperation

Humans routinely wield tools, swap grasps, and reposition objects within a single hand, seamlessly orchestrating contact transitions that span translation, reorientation, and finger gaiting. Endowing robot dexterous hands with this level of in-hand dexterity through teleoperation requires precise control of object motion via dynamic hand-object contact, yet current teleoperation systems remain far from this capability. To bridge this gap, we take a major step towards human-level dexterous teleoperation by introducing TeleDexter, a hand-object co-tracking controller that maps operator intent into learned, low-level contact execution. The controller is trained on consecutive co-tracking subgoals derived from human reference motions, utilizing a hybrid reward that couples sparse subgoal objectives with dense tracking rewards to enable learning across diverse interaction modalities rather than frame-wise trajectory imitation. The entire pipeline requires only single-stage RL and, with random action masking and domain randomization, transfers zero-shot to the real robot. We evaluate TeleDexter on seven challenging dexterous teleoperation tasks spanning object reorientation and long-horizon tool use across two dexterous hands, achieving a 75% average success rate where all baselines consistently fail. Furthermore, the collected demonstrations successfully train autonomous policies via behavioral cloning, marking a concrete step towards human-level dexterous teleoperation.
Jul 13, 2026cs.RO

Wearing A Coat: Dual-Arm Robot-Assisted Dressing with Differentiable Clothing Simulation

The development of assistive robots for dressing tasks serves to augment human convenience and improve the quality of life for individuals with physical impairments. However, due to the intricate contact interactions between garments and the human limbs during dressing, most robot-assisted dressing algorithms treat clothing as an assembly of discrete segments, thereby struggling to manage the partial worn garments under contact constraints. To overcome this challenge, we propose a novel robotic dressing control algorithm that integrates realtime differentiable clothing simulation. The simulation algorithm employs explicit iterative scheme with intentionally introduced higher-order perturbations to enhance computational efficiency while maintaining stability under large time-step conditions. Through simulation, we resolve the garment state under contact constraints, which then enables a multi-phase control strategy for successful coat dressing assistance. To further improve real-time performance, we introduce a constrained local model along with its corresponding optimization solver, permitting high-frequency local compensation for the differentiable simulation based global controller. Finally, we experimentally validate our approach through both simulated and physical dressing scenarios, conclusively demonstrating its feasibility and efficacy
Jul 10, 2026cs.RO

PAC-ACT: Post-training Actor-Critic for Action Chunking Transformers

Precision industrial contact manipulation requires reliable robot policies under pose perturbations and contact-force constraints. Vision-language-action models offer broad generalization but often introduce high inference latency and GPU-memory cost, while vision-action chunking policies are more suitable for real-time industrial control. However, these policies are usually trained by behavior cloning and suffer from distribution shift in contact-rich tasks. This paper proposes PAC-ACT, a reinforcement-learning post-training framework for pretrained Action Chunking Transformer policies. PAC-ACT reformulates policy optimization at the chunk level, constructs an ACT-transferred actor-critic architecture, and introduces a hybrid behavior-prior constraint to preserve the pretrained action distribution during online fine-tuning. Experiments on industrial precision-contact benchmarks show that PAC-ACT improves task success, contact stability, and force safety while retaining low latency and low GPU-memory usage. On the Contour task, PAC-ACT significantly reduces peak contact force and decreases the proportion of force readings above 60 N by 46 times. Sparse-reward ablations further show that the proposed behavior-prior constraint enables effective exploration under randomized initial poses.
Jul 10, 2026cs.RO

TACTIC: Tactile and Vision Conditioned Contact-Centric Control for Whole-Arm Manipulation

Whole-arm manipulation involves direct contact with the environment while the robot completes a task by distributing contact across multiple links as contacts form, slide, and break. This setting breaks common implicit assumptions in many learning-based manipulation pipelines: arm configuration tightly couples motion and contact forces, contact state is partially observed under occlusion, and purely learned rollouts can become physically inconsistent under distribution shift because many multi-link contact configurations are sparsely represented in the data. To address this, we propose TACTIC (Tactile and Vision Conditioned Contact-Centric Control), a receding-horizon controller for whole-arm manipulation. TACTIC uses a contact-centric hybrid predictive model that combines RGB-D, distributed tactile sensing, and a compact 2D proximity representation. The model couples a learned, action-conditioned latent dynamics model with analytical kinematics through contact Jacobians, enabling rollouts of future contact configurations and interaction forces. TACTIC integrates these rollouts into a sampling-based MPC planner with contact-aware action sampling: contact Jacobian-based projections steer sampled action sequences toward force-modulating directions, and objectives defined over predicted proximity and interaction forces trade task progress against whole-arm force regulation. We evaluate TACTIC in simulation against state-of-the-art model-based and model-free methods, and perform ablations that isolate the contribution of each design choice. TACTIC consistently outperforms other methods. We further demonstrate real-world performance on a robot with distributed tactile sensing across three whole-arm manipulation tasks that require multi-contact trajectories: turning over and repositioning a manikin, and goal-reaching in a 3D dynamic maze. Website: https://emprise.cs.cornell.edu/tactic
Jul 9, 2026cs.RO

ContactMimic: Humanoid Object Interaction via Contact Control

Keypoint tracking alone is insufficient for object interaction tasks such as sitting on a chair, wiping a board, or pushing furniture, where the robot can reach the correct pose without making meaningful physical contact with the object. We present CONTACTMIMIC, a learning framework that tracks explicit partlevel binary contact commands alongside keypoint trajectories. CONTACTMIMIC is made possible through the use of contact-following rewards and a trajectory augmentation scheme aimed at breaking the correlations between keypoint trajectories and contact labels. The resulting policy successfully decouples contact behavior from keypoint geometry, and achieves precise physical contact as well as contact-controllability (produce or suppress contact during deployment as desired). Simulation experiments across 10 diverse human-object interaction motions confirm that CONTACTMIMIC exhibits contact controllability that enables it to complete manipulation tasks without task-specific rewards, while also outperforming keypoint-only trackers on contact-relevant tasks. Ablations confirm the necessity of the proposed trajectory augmentation scheme and sim2real deployment validates contact controllability in the real world across 5 different motions. Video results are available on https://lixinyao11.github.io/contactmimic-page/.
Jul 8, 2026cs.RO

Context-Aware Force Estimation for Deformable Tool Manipulation in Robotic Environmental Swabbing via Few-Shot Continual Adaptation

Robotic surface swabbing requires sustained interaction between a compliant tool and heterogeneous environments, where accurate estimation of tip-level contact force is critical for consistent sampling performance. However, deformable tool dynamics introduce nonlinear viscoelastic hysteresis that decouples wrist-mounted force measurements from true contact forces, while tool-integrated sensors are impractical for deployment due to sterility and disposability constraints. This paper presents a data-driven framework for contact force estimation in Deformable Tool Manipulation (DTM) that leverages proprioceptive sensing without requiring explicit physical models or permanent embedded sensing hardware at the tool tip. A recurrent architecture is first identified through a comparative evaluation of temporal models, where a compact LSTM achieves the lowest estimation error and sub-millisecond inference latency. To address generalization across unseen surfaces and tool compliance conditions, we introduce a parameter-isolated few-shot adaptation strategy that augments a frozen recurrent backbone with low-dimensional context embeddings using feature-wise linear modulation (FiLM). Experiments on a UR5e platform across nine tool-surface interaction regimes demonstrate that the proposed approach significantly improves robustness under domain shift, reducing zero-shot estimation error by up to 63% while preserving baseline performance without catastrophic forgetting. These results show that separating shared deformation-history dynamics from domain-specific conditioning enables reliable force estimation for DTM in non-stationary environments.
Jul 8, 2026cs.RO

TouchWorld: A Predictive and Reactive Tactile Foundation Model for Dexterous Manipulation

Dexterous manipulation in everyday environments requires both anticipation and reaction: a robot must predict how contact should evolve while rapidly correcting local errors caused by slip, misalignment, unstable grasping, or force mismatch. Vision and language provide semantic and geometric guidance, but they cannot reliably reveal hidden contact states such as force, slip, and contact stability. Although tactile sensing exposes these physical cues, most existing policies treat touch as a low-frequency observation stream within a monolithic action model, coupling slow task reasoning, action generation, and fast contact feedback in a single loop. We introduce TouchWorld, a predictive-and-reactive tactile foundation model for dexterous manipulation. TouchWorld uses a hierarchical policy that separates vision-language subtask planning, tactile world-model prediction, visuo-tactile goal-conditioned action generation, and high-frequency tactile residual refinement. A High-Level Planning Layer produces executable subtasks and predicts tactile subgoals; a Visuo-Tactile Goal-Conditioned Policy generates nominal action chunks; and a Tactile-Conditioned Refinement Policy performs online residual correction using recent tactile and proprioceptive feedback. By using touch as both a predictive contact reference and a fast feedback signal, TouchWorld preserves the semantic generalization of vision-language-action policies while improving local contact adaptation. Across six long-horizon and contact-rich dexterous manipulation tasks, TouchWorld achieves 65.0% success in the clean setting and 53.7% success under human perturbations, outperforming the strongest baseline by 15.7 and 18.5 percentage points, respectively.
Jul 7, 2026cs.RO

WristMimic: Full-Body Humanoid Control with Wrist-Guided Manipulation

Retargeting human object interaction demonstrations to physics based simulation requires reproducing not only body motion but also the object motion and contacts that make manipulation succeed. However, position only hand trajectories do not specify the contact forces needed to manipulate objects, and directly tracking them can overconstrain contact rich finger behavior. We introduce WristMimic, a wrist guided whole body control framework that explicitly separates contact free body motion from contact rich hand manipulation. The contact free body and wrist are guided by kinematic pose targets, whereas the fingers are not directly supervised by human hand pose. Instead, they learn grasping and manipulation behaviors from object tracking and contact outcomes. Our key insight is that the wrist is the natural gate between these two regimes. It is largely free from contact and can be tracked kinematically, yet it determines the global hand configuration and places the fingers within reachable grasp affordances. To ensure reliable wrist placement during interaction, we introduce wrist specific reset constraints and reward prioritization. Experiments show that WristMimic matches or surpasses methods using full finger pose supervision while enabling finger agnostic retargeting across diverse hand embodiments.
Jul 4, 2026cs.RO

ObjRetarget: An Object-Aware Motion Retargeting Framework with Anthropomorphic Arm Constraints and Polyhedral Hand Modeling

Learning robot dexterous manipulation from human manipulation videos requires reliably retargeting human intent to executable robot actions while maintaining stable hand-object contact, which remains a key challenge in embodied intelligence. Existing retargeting methods often ignore explicit contact modeling or rely on reinforcement learning, resulting in limited accuracy and generalization. To address this, we propose ObjRetarget, a human-to-robot motion retargeting framework for learning robot dexterous manipulation from human videos, which integrates anthropomorphic arm trajectory constraints with structured hand-object geometric modeling. For arm motion, reference trajectories extracted from human videos are used for initialization, followed by anthropomorphic constraints and redundancy-aware optimization to generate natural and accurate movements. For hand manipulation, ObjRetarget represents multi-finger contacts using polytope clusters and preserves contact structure through geometric invariants to improve stability. Experiments on real robots show that ObjRetarget improves manipulation success rates and contact stability across multiple dexterous tasks, and generalizes well to different demonstrations, object poses, and task settings.
Jul 4, 2026cs.RO

OmniTacTune: Policy-Agnostic Real-World RL for Tactile Residual Adaptation of Visual Policies

Visual policies learned from human videos, teleoperation, and robot demonstrations offer scalable motion priors, but often fail in contact-rich manipulation, where success significantly depends on local force and contact geometry. Tactile sensing provides these complementary signals, yet tactile data remain costly to collect and hard to generalize across sensors, robots, and tasks. We introduce OmniTacTune, a policy-agnostic real-world RL pipeline that adapts tactile feedback to pretrained visual policies through residual correction. OmniTacTune uses a two-stage design: it first bootstraps tactile-aware learning from autonomous base-policy rollouts, then learns a lightweight tactile residual policy through online interaction. Extensive experiments show that OmniTacTune generalizes across diverse contact-rich tasks, visual base policies, and tactile representations. Across four real-world contact-rich tasks, it improves visual base policies from 5-40% success to 85-100% within 40-80 minutes, demonstrating an efficient path for adapting tactile feedback to scalable visual robot policies. Project page: https://colinyu1.github.io/omnitactune-site/
Jul 3, 2026cs.RO

CoorGrasp: Coordinated Contact Control for Adaptive Dexterous Grasping Under Uncertainty

While recent research has focused heavily on dexterous grasp pose generation, less attention has been devoted to the execution of planned grasps. Under shape and position uncertainty, open-loop execution often yields uncoordinated contacts, causing undesired in-hand object motion and even grasp failures. To address this, this paper proposes a tactile-driven model predictive controller for adaptive and delicate execution of diverse dexterous grasps. Our approach emphasizes multi-contact coordination across both approaching and grasping phases, with three key novelties: (i) coordination-aware phase separation, (ii) arm-hand coordination to compensate for position errors, and (iii) adaptive force coordination to increase contact forces in a balanced manner. An analytical model is employed to relate contact forces to robot joint motions for predictive control. Our formulation imposes no restrictions on grasp types or contact configurations and integrates seamlessly with state-of-the-art grasp pose generation methods. We validate the approach through large-scale simulations involving 15k grasps across 478 objects on three robotic hands, and real-world experiments on 8 objects. Results demonstrate that our method achieves higher grasp success rates and reduced undesired object movements.
Jul 3, 2026cs.RO

Current as Touch: Proprioceptive Contact Feedback for Compliant Dexterous Manipulation

Compliance is essential for dexterous manipulation, yet existing solutions often rely on external tactile or force sensors that are costly, fragile, and difficult to deploy on low-cost robot hands. We propose a proprioception-driven framework that learns contact-aware compliance cues from motor current and joint states. Since motor current is closely related to actuator torque, it provides an intrinsic signal for perceiving contact force, object resistance, and grasp stability without additional sensing hardware. Rather than estimating external wrenches or commanding torque, our method predicts a compliance reference position: an ideal joint-position target for a standard PD controller whose induced position error generates appropriate grasping force. This position-based formulation is compatible with mainstream teleoperation and policy-learning pipelines, while enabling the robot to adapt interaction forces from real-time proprioceptive feedback. Thus, motor current serves not only as a force proxy but also as a learnable proprioceptive contact signal for compliance reference prediction. Experiments on multiple dexterous hands and contact-rich tasks, including fragile object handling, sustained surface contact, thin-object retrieval, and dynamic load adaptation, show stable compliant grasping, safer and more efficient teleoperation, and improved downstream policy learning without external tactile or force sensors.
Jul 3, 2026cs.RO

Feeling the Unexpected: ResTacVLA for Contact-Rich Manipulation via Residual Tactile Representation

Tactile perception is indispensable for contact-rich manipulation, yet integrating it into Vision-Language-Action (VLA) models often induces modality collapse, where high-bandwidth visual features overshadow sparse tactile cues. Inspired by Predictive Coding, a neural mechanism where the brain attenuates predictable inputs to prioritize surprising stimuli, we propose ResTacVLA. Rather than treating tactile data as raw input, we reformulate it as a Residual Tactile Representation capturing the discrepancy between visual priors and physical sensations. By filtering out visually predictable dynamics, this formulation transforms sparse tactile signals into dense, high-value information gain, thereby inherently resolving the bandwidth mismatch. These residuals are discretized through a Vector Quantized (VQ) bottleneck into Latent Contact Primitives that capture critical events missed by vision. Analogous to the neural surprise signal, we leverage the uncertainty of the visual prior to adaptively gate tactile integration, prioritizing residuals specifically during visually unreliable phases to explicitly prevent visual dominance. Experimental results show that ResTacVLA consistently outperforms all baselines on a diverse set of contact-rich manipulation tasks, while remaining robust to unexpected dynamic disturbances. Project page: https://awilekong.github.io/ResTacVLA/
Jul 3, 2026cs.RO

TACO: TActile World Model as a Self-COrrector for Scalable Robot Policy Post-Training

Vision-Language-Action models and World Action Models have shown promising generalization in robotic manipulation but remain fragile in contact-rich tasks, where contact perturbations can cause failures that are difficult to detect from vision alone. Corrective post-training with tactile feedback can improve recovery, but scaling such supervision through human intervention is costly. World models can synthesize additional training data, yet vision-only generation may produce visually plausible but contact-inconsistent trajectories. We therefore introduce TACO, a scalable robot policy post-training framework built on a compositional tactile world model. Given real rollouts, TACO follows a Recognize--Imagine--Label loop: an inverse dynamics and value model identifies failure-adjacent states using progress estimates, a visuo-tactile generation model imagines local corrections by jointly generating video and tactile sequences, and the inverse dynamics and value model labels them with corrective actions and progress scores. Candidates are filtered for kinematic feasibility and tactile plausibility, then selected by predicted progress gain. TACO aggregates demonstrations, real rollouts, and selected corrections for iterative post-training. It combines knowledge-insulated tactile adaptation with CFG-RL using binary advantage labels while keeping the pretrained VLM backbone fixed. Experiments on real-world tasks show that TACO improves the average task score from 0.375 to 0.825 after two post-training iterations.
Jul 2, 2026cs.RO

VT-WAM: Visual-Tactile World Action Model for Contact-Rich Manipulation

Contact-rich manipulation requires policies to react to local deformation, pressure, slip, and friction, yet these cues are temporally sparse and often invisible in visual observations. Existing visual-tactile policies usually feed tactile observations directly into action prediction, but rarely model tactile deformation dynamics during action generation. In this paper, we introduce VT-WAM, a Visual-Tactile World Action Model that jointly learns future visual prediction, tactile deformation prediction, and action prediction within a unified flow matching framework. In particular, VT-WAM introduces (1) Asymmetric Mixture-of-Transformers (MoT) attention to bridge a first-frame visual anchor with temporal tactile dynamics, and (2) contact-gated Action-Visual-Tactile Attention Guidance (AVTAG) to encourage action queries to rely on tactile evidence during contact phases. Across six real-world contact-rich manipulation tasks, VT-WAM achieves a 71.67% average success rate, outperforming Fast-WAM by 26.67% and OmniVTLA by 35.84%. Ablations demonstrate that modeling tactile deformation dynamics and guiding contact-phase tactile attention are both important for contact-rich tasks. Project website: https://vt-wam.github.io/.
Jul 2, 2026cs.RO

Imagining the Sense of Touch: Touch-Informed Manipulation via Imagined Tactile Representations

Tactile sensing can substantially improve contact-rich robotic manipulation, yet its practical deployment remains limited by the fragility, calibration requirements, and maintenance burden of tactile hardware. This raises a fundamental question: can robots benefit from tactile knowledge without requiring tactile sensors at deployment? We present TacImag, a tactile imagination framework that predicts tactile observations from vision and proprioception and uses the generated signals to guide manipulation policies. Trained from paired visuotactile demonstrations, TacImag enables touch-informed manipulation using only visual observations at test time. We evaluate TacImag on six simulated and four real-world manipulation tasks. Across simulation and real-world experiments, imagined tactile observations consistently improve manipulation performance without requiring tactile hardware. In real-world experiments, imagined force fields improve contact-sensitive tasks by 44.4% on average, whereas imagined tactile images improve texture-sensitive tasks by 23.3%, revealing that the effectiveness of tactile imagination depends strongly on the relationship between tactile representation and task requirements. Our results further suggest that tactile imagination does not simply recover missing tactile measurements. Instead, it acts as a form of contact-aware supervision that transforms subtle visual interaction cues into representations that are easier for manipulation policies to exploit.
Jul 2, 2026cs.RO

One Demonstration Is Enough for Real-World Robotic Reinforcement Learning

Learning effective robot control policies on physical hardware is challenging due to costly data collection and the difficulty of reward specification. Prior work has incorporated demonstrations into reinforcement learning (RL), yet existing approaches either require large numbers of demonstrations or depend on continuous human intervention during training. To address these limitations, we present AutoSERL, a framework that leverages a single demonstration to fully automate the intervention process in real-world robot RL. The framework includes three complementary mechanisms to accomplish certain tasks: a sliding window intervention mechanism that continuously guides exploration to prevent local optima and unsafe deviations, a safety recovery mechanism that detects and corrects failure states via predefined trajectory recovery points, and an intervention termination criterion that automatically disables guidance once the policy can independently complete the task, preserving its exploration advantage. We evaluate AutoSERL on six contact-intensive manipulation tasks across two robot platforms, spanning insertion, hanging, and hinge-based tasks. AutoSERL consistently outperforms SERL initialized with 20 demonstrations, behavior cloning, and MILES -- a dedicated one-shot imitation learning baseline -- across all tasks while matching HIL-SERL, achieves 100% success rate on insertion tasks, and demonstrates improved robustness to positional variations, all from a single demonstration. Code and videos are available on our project website: https://autoserl.github.io/.
Jul 1, 2026cs.RO

Human-Centric Transferable Tactile Pre-Training for Dexterous Robotic Manipulation

As an essential modality for dexterous and contact-rich tasks, tactile sensing provides precise force feedback that cannot be reliably inferred from vision. However, limited by hardware and data collection systems, existing datasets with tactility remain small in scale and narrow in contact coverage. Meanwhile, Vision-Language-Action (VLA) models with tactile modality are constrained on dynamics-agnostic post-training, which limits the performance ceiling on downstream tasks. In this paper, we present H-Tac, a large-scale tactile-action dataset with 160-hour egocentric human videos containing more than 300 tasks and 135k episodes. Building upon this, we propose Transferable Tactile Pre-Training (TTP), a system of tactile-based pre-training on human data for fine-grained robotic tasks. To bridge the gap between humans and robots, we use unified tactile and action spaces throughout the pre-training and post-training phases, preserving prior knowledge during human-to-robot transfer. By leveraging a tactile expert for future tactile prediction, our framework explicitly models the contact dynamics and precise physical interactions. Extensive experiments in simulation and on real robots demonstrate that our model achieves superior performance, exhibiting robust generalization and fine-grained manipulation capabilities. TTP paves the way for scalable tactile pre-training via human-to-robot transfer.
Jun 30, 2026cs.RO

UniTacVLA: Unified Tactile Understanding and Prediction in Vision Language Action Models

Vision-language-action (VLA) models have achieved strong performance in many robotic manipulation tasks, yet remain limited in contact-rich dexterous manipulation. To overcome this limitation, recent vision-tactile-language-action (VTLA) methods incorporate tactile sensing into VLA models to provide direct contact information. However, they typically treat tactile signals as passive auxiliary inputs, making it difficult to model tactile semantics and future physical interactions. To this end, we propose a unified tactile learning framework for contact-rich manipulation that models tactile signals as dynamic interaction cues for both contact understanding and prediction. Specifically, we construct a unified tactile latent space and jointly model current tactile states and future contact changes through tactile chain-of-thought reasoning and coarse-to-fine future tactile prediction, thereby forming a state-aware and dynamics-aware tactile prior. Based on this prior, we introduce a tactile-action mixed controller that combines real-time and predicted tactile feedback to refine low-frequency action chunks with high-frequency corrections. Real-world experiments on four categories of contact-rich tasks, including adjustment, insertion, wiping, and assembly, under both clean and externally perturbed settings, show that our method improves success rate, manipulation accuracy, and contact robustness over existing methods, demonstrating its effectiveness in dexterous physical interaction.
Jun 30, 2026cs.RO

TactX: Learning Shared Tactile Representations Across Diverse Sensors

Tactile sensors provide critical information for contact-rich manipulation, yet tactile representations and policies remain tightly coupled to each specific sensor, limiting transferability across robots and hardware platforms. We propose TactX, a framework for learning a transferable tactile representation across sensors spanning three fundamentally different transduction modalities: resistive, magnetic, and vision-based. TactX maps heterogeneous tactile observations into a shared latent space through modality-specific encoders trained on paired contact data. Such paired interactions provide a natural alignment signal across modalities, and the encoders are jointly trained across all sensor pairs, inducing a consistent latent space for all sensor types. Our experiments show that TactX aligns tactile representations across sensors while preserving object-level contact information, as evidenced by sensor-identity prediction and object classification in the learned latent space. We evaluate TactX on four contact-rich manipulation tasks: pick-and-place, plug insertion, board wiping, and object reorientation, and show that policies trained with one sensor transfer zero-shot to physically distinct sensors through the shared latent. This improves the average success rate from 27.5% for vision-only policy to 45.9%, providing a step toward sensor-agnostic tactile manipulation.
Jun 29, 2026cs.RO

Multisensory Continual Learning: Adapting Pretrained Visuomotor Policies to Force

Robot manipulation often relies on sensory feedback beyond vision, particularly in contact-rich settings where force, tactile, or audio signals reveal interaction states that are not directly observable from images. However, these modalities are often hardware- and task-specific, and large-scale multisensory robot datasets remain scarce. As a result, it is impractical to pretrain policies with every sensor they may encounter. We study multisensory continual learning: adapting a pretrained robot policy such as a World-Action Model or VLA to new tasks with newly introduced modalities while preserving performance under the original sensor suite. We propose MultiSensory World Model (MuSe), which incorporates limited multisensory data into pretrained vision-only policies through multi-stage fusion, multisensory future prediction, and experience replay over pretraining data. We instantiate MuSe by augmenting a pretrained vision-only World-Action Model with tactile force-torque sensing and evaluate it on real-world manipulation tasks. Our experiments show that MuSe performs strongly on contact-rich finetuning tasks while preserving, and in some cases improving, performance on the original pretraining tasks. These results suggest that a modest multisensory dataset can improve general robot capabilities beyond the finetuning distribution. Project website: https://jadenvc.github.io/multisensory-continual-learning/
Jun 29, 2026cs.RO

ConCent: Contact-Centric Real-to-Sim-to-Real Learning from One Demonstration

Sim-to-real policy transfer -- deploying policies trained in simulation in the real world -- is a promising paradigm for scaling robot manipulation without large-scale real-world data. However, transferring simulation-trained policies remains challenging due to discrepancies in contact dynamics -- particularly in contact-rich tasks where subtle differences can alter task outcomes entirely. Because interaction between the manipulated object and the environment is mediated through contact, task success depends on accurately reproducing task-relevant contacts. Accordingly, in manipulation, contact-centric fidelity -- reproducing both the contact event sequence (when, where, and how contacts occur) and the local contact dynamics (how forces and motions evolve at each contact) -- is a necessary condition for task success. Based on this insight, we propose a contact-centric real-to-sim-to-real RL framework that uses task-relevant contact event sequences extracted from real demonstrations as the learning objective. We approximate objects as groups of primitives and optimize their contact geometry in simulation so that the resulting local contact dynamics explain the observed state transitions. The contact event sequence is automatically extracted by replaying the demonstration. This sequence serves as a structured reward signal, guiding the policy toward physically plausible contact regimes validated in reality and preventing exploitation of unrealistic simulator contacts. The signal is obtained automatically, requiring no per-task reward design. Experiments on contact-rich manipulation tasks demonstrate more stable and robust sim-to-real policy transfer compared to unconstrained RL baselines.
Jun 29, 2026cs.RO

Seeing Touch from Motion: A Unified Modality-Aware Visuo-Tactile Policy with Tactile Motion Correlation

Visuo-Tactile policies leveraging optical tactile sensors have shown great promise in contact-rich manipulation. These sensors achieve high spatial resolution and multi-dimensional force sensing by utilizing an internal camera to monitor the deformation of their elastic gel surface, thereby indirectly inferring tactile cues. Despite their advantages, extracting fine-grained contact states necessary for contact-rich manipulation remains an open challenge. Existing methods typically use either raw images or cumulative motion fields to represent tactile cues. However, both are prone to perception ambiguity. Raw tactile images mainly capture appearance changes, while cumulative motion fields only reflect the aggregate gel deformation. Consequently, distinct fine-grained contact states can exhibit highly similar patterns, making it difficult to explicitly distinguish subtle contact variations. To address this issue, we explore the dynamic priors of tactile motion and discover that the correlation between transient and cumulative motion can explicitly distinguish fine-grained contact states. Based on this insight, we propose a motion-aware tactile representation to facilitate contact-rich manipulation. Beyond tactile representation, effective fusion of tactile and visual modalities is also critical. Most existing fusion methods either directly concatenate features from each modality or train modality-specific networks separately and fuse their outputs. However, these strategies struggle to simultaneously model cross-modal interactions and preserve modality-specific characteristics. In this work, we take advantage of the Mixture-of-Transformers architecture and propose a unified modality-aware visuo-tactile policy that captures cross-modal complementarity while maintaining modality-specific properties.
Jun 26, 2026cs.RO

Learning Stable In-Grasp Manipulation in a Non-Dropping Action Space

Traditionally, dexterous manipulation controllers are designed using analytic models constrained by strong assumptions about the hand and the objects being manipulated. Reinforcement learning (RL) has become another common approach in which skills are explored openly in an end-to-end manner but is inefficient because of unnoticeable instability and conflicts in learning objectives. This paper attempts to efficiently explore stable and accurate manipulation skills by decomposing dexterous skills into multiple simpler/analyzable components. Each skill component is subsequently learned with constraints and guidance from classical physics and control theory. Our work shows that for stable grasp, in-grasp reposition/reorientation with different objects, sensor/motor noise, latency, and frictional conditions, skill learning becomes efficient and stable with prior knowledge from theory.
Jun 25, 2026cs.RO

SceneBot: Contact-Prompted General Humanoid Whole Body Tracking with Scene-Interaction

Current humanoid reinforcement-learning policies excel at free-space motions but struggle with contact-rich tasks, as pure kinematic tracking cannot resolve the physical ambiguities of interacting with objects and uneven terrain. To address this, we introduce SceneBot, a unified motion-tracking framework capable of handling freespace locomotion, terrain traversal, and whole-body manipulation. SceneBot conditions a single policy on both reference motions and per-link contact labels, explicitly defining expected environmental interactions. To overcome the lack of annotated interaction data, we propose a hindsight scene reconstruction approach that infers scene-interaction graphs from retargeted human motion. Trained on 7.5 hours of this reconstructed, contact-rich data, SceneBot successfully generalizes to unseen motions and environments. Our results demonstrate that SceneBot is the first general framework to seamlessly unify free-space and contact-rich behaviors executing complex, long-horizon tasks like carrying a box upstairs and establishing contact conditioning as a powerful interface for humanoid control. All code and data will be open-sourced. More demos and information are available at: https://ericcsr.github.io/scenebot/
Jun 25, 2026cs.RO

VibeAct: Vibration to Actions for Contact-Rich Reactive Robot Dexterity

Dexterous manipulation depends on contact events that are fast, local, and often visually occluded. Piezoelectric microphones offer a compact and high-bandwidth way to sense these interactions, but the resulting vibro-acoustic signals are difficult to simulate faithfully enough for end-to-end sim-to-real policy learning on dexterous robot hands. We propose VibeAct, a framework that bridges real vibrotactile sensing and simulation-based reinforcement learning through a shared physical representation of contact and slip. In the real world, we embed piezoelectric microphones into a dexterous robot hand and collect vibro-acoustic data through teleoperation, then replay the recordings in a calibrated digital clone to automatically label per-finger contact and slip. A tactile estimator learns to predict contact and slip from real microphone waveforms, while manipulation policies are trained in simulation on the same representation computed directly from simulated contacts. This decoupling lets policies exploit rapid tactile feedback without simulating raw audio. Across five contact-rich tasks spanning regrasping, in-hand reorientation, and insertion, VibeAct consistently outperforms a proprioception-and-point-cloud baseline in simulation, with the largest gains on tasks requiring sustained reactive control, where the continuous slip-magnitude channel proves the most informative observation. The learned policies transfer to a physical dexterous hand-arm platform, improving success rates on deployed tasks. Project videos and additional details are at https://vibeact.github.io/.