Motion Retargeting

Advances in learning-based robotic manipulation, such as Vision-Language-Action (VLA) models and Video Action Models (VAMs), heavily rely on high-quality teleoperation data. Their capabilities are strictly upper-bounded by the quality of the underlying human demonstrations. Current gradient-based retargeting algorithms often converge to different local minima, resulting in jitter that affects data quality and teleoperation experience. To address this, we introduce the Sampling-Based Retargeter (SBR), a novel gradient-free retargeting method drawn from the rich literature of sampling-based control and explicitly designed for low-jitter, real-time kinematic retargeting. We evaluate SBR both in simulation and through a rigorous real-world user study involving 18 participants performing 3 complex manipulation tasks. Compared to gradient-based baselines, SBR achieved the highest overall task success rate (54.1%) while significantly reducing operator cognitive fatigue, recording the lowest NASA-TLX workload score (36.4 out of 100). Ultimately, we establish SBR as a highly effective, intuitive retargeter for dexterous manipulation, providing the community with a rigorous benchmarking methodology to guide future retargeting research.

Retargeting human object interaction demonstrations to physics based simulation requires reproducing not only body motion but also the object motion and contacts that make manipulation succeed. However, position only hand trajectories do not specify the contact forces needed to manipulate objects, and directly tracking them can overconstrain contact rich finger behavior. We introduce WristMimic, a wrist guided whole body control framework that explicitly separates contact free body motion from contact rich hand manipulation. The contact free body and wrist are guided by kinematic pose targets, whereas the fingers are not directly supervised by human hand pose. Instead, they learn grasping and manipulation behaviors from object tracking and contact outcomes. Our key insight is that the wrist is the natural gate between these two regimes. It is largely free from contact and can be tracked kinematically, yet it determines the global hand configuration and places the fingers within reachable grasp affordances. To ensure reliable wrist placement during interaction, we introduce wrist specific reset constraints and reward prioritization. Experiments show that WristMimic matches or surpasses methods using full finger pose supervision while enabling finger agnostic retargeting across diverse hand embodiments.

In dual-arm dexterous teleoperation, cross-platform generalization of motion retargeting and interactivity of grasping are crucial. However, the heterogeneity of robotic architectures and the wide variety of grasping objects pose significant challenges to achieving precise motion retargeting and compliant grasping in dual-arm dexterous teleoperation. To address these challenges, a dual-arm dexterous teleoperation system (DexTele) is proposed based on motion retargeting and adaptive force control. First, a vision-based motion retargeting module is designed to generate preliminary robot motions from human images. In this module, a motion-graph encoder and latent optimization are proposed for precise and convenient cross-platform motion retargeting. Second, an adaptive grasping module is designed to achieve compliant grasping. This module combines a vision-language model (VLM) with model predictive control (MPC), allowing the system to predict the required grasping force for a target object and perform gradient-based online optimization. Finally, extensive experiments demonstrate that the DexTele achieves precise motion retargeting and compliant grasping with generalization across multiple robot platforms.

Learning robot dexterous manipulation from human manipulation videos requires reliably retargeting human intent to executable robot actions while maintaining stable hand-object contact, which remains a key challenge in embodied intelligence. Existing retargeting methods often ignore explicit contact modeling or rely on reinforcement learning, resulting in limited accuracy and generalization. To address this, we propose ObjRetarget, a human-to-robot motion retargeting framework for learning robot dexterous manipulation from human videos, which integrates anthropomorphic arm trajectory constraints with structured hand-object geometric modeling. For arm motion, reference trajectories extracted from human videos are used for initialization, followed by anthropomorphic constraints and redundancy-aware optimization to generate natural and accurate movements. For hand manipulation, ObjRetarget represents multi-finger contacts using polytope clusters and preserves contact structure through geometric invariants to improve stability. Experiments on real robots show that ObjRetarget improves manipulation success rates and contact stability across multiple dexterous tasks, and generalizes well to different demonstrations, object poses, and task settings.

Human image animation, which aims to generate a video of a reference subject following a provided action sequence, has received increasing research interest. With the development of diffusion-based/flow-based video foundation models, existing animation works have began to upgrade the guidance information from 2D skeleton/pose to 3D modeling conditions. Despite achieving reasonable results, these approaches face challenges in synthesizing trajectory-controllable human motion within natural scene under changed camera views. In this work, we present a scene-adaptive human image animation framework that controls both human motion and camera trajectories within a reconstructed 3D environment for video generation. To achieve this, we first develop a ground-adaptive 3D motion retargeting approach to enable user-friendly motion trajectory control adapting to the changes of elevations of ground and orientations automatically. Then we design a viewpoint-adaptive latent fusion mechanism to inject point-cloud geometric priors through scene-visibility masking into the generative process, providing precise guidance of viewpoint changes under camera control. Experiments on two standard human image animation benchmark datasets demonstrate remarkable improvements of our method over the state of the arts in related video generation metics. Project page: https://robinhood256100.github.io/web-disp

Recent progress in humanoid behavior models has been driven in large part by abundant human motion data, but comparable motion data is scarce for non-humanoid legged robots such as quadrupeds, hexapods, and quadruped manipulators. A promising alternative is to repurpose human motion across embodiments; however, direct retargeting often produces motions that are visually plausible yet physically inconsistent or difficult to track under robot dynamics. We present X-Morph, a human-motion-to-robot-behavior pipeline that converts human motion into deployable locomotion and loco-manipulation policies for diverse non-humanoid legged morphologies. A cross-morphology retargeting stage converts human motions into kinematically plausible, intent-preserving robot references, which are then tracked by a privileged RL policy and distilled into a causal student policy. We evaluate X-Morph on three morphologically distinct platforms: a quadruped, a hexapod, and a quadruped equipped with a manipulator. The resulting policies track diverse retargeted motions, generalize to unseen human motions, and support downstream use cases including video-based teleoperation, behavior-prior control, and text-conditioned motion generation. These results suggest that large-scale human motion can serve as a substrate for learning broad, reusable behavior priors beyond humanoid robots. Project page: https://maker-rat.github.io/morph/

Direct transfer from human demonstration to learnable robot action is a crucial step towards scalable whole-body mobile manipulation. While human data scales better than mobile teleoperation, it requires overcoming significant embodiment gaps. Existing retargeting methods yield imprecise or inconsistent solutions, causing action multi-modality that prevents supervised policies from reliably converging. We present Whole-body-Aware Retargeting from human Pose (WARP), an offline pipeline that explicitly models embodiment differences to extract precise, unique whole-body actions. WARP leverages a closed-form Shoulder-Elbow-Wrist (SEW) geometric solver for exact end-effector tracking while preserving whole-body structural intent. Paired with lazy mobile-base control, it extracts accurate, consistent robot trajectories. Evaluations show WARP provides highly reliable data for open-loop real-world replay. To our knowledge, WARP is the first framework to achieve zero-shot whole-body mobile manipulation directly from offline human demonstrations, eliminating the need for human-in-the-loop teleoperation action data. More details on https://warp-retarget.github.io/

Internet videos constitute the largest reservoir of embodied human manipulation knowledge, yet converting arbitrary RGB footage into actionable robot training data remains a major bottleneck. Existing lab- or factory-collected datasets are narrow in scale and diversity, limiting open-world robot learning. Instead of proposing a static dataset, we introduce EgoInfinity, a universal 4D hand-object interaction data engine that enables web-scale data generation for robot retargeting and learning. EgoInfinity is a modular engine integrating perception, segmentation, reconstruction, interaction-aware refinement, and retargeting to automate this traditionally unscalable video-to-action problem without human-in-the-loop annotation. Its modular design lets the engine continuously benefit from advances in any incorporated component. With EgoInfinity, in-the-wild human manipulation videos are lifted into agent-agnostic, metric 4D hand-object representations, including hand trajectories, 6-DoF object poses, and contact-relevant states. Rather than naively connecting standalone components, EgoInfinity combines cross-module metric calibration with interaction-aware refinement to improve physical reliability, reducing drift and contact inconsistencies common in pure visual reconstruction. We further propose a novel motion retargeter that compiles the recovered 3D hand motions into executable joint trajectories for diverse robot morphologies, enabling video-to-action retargeting on any robot from arbitrary viewpoints and shot sizes (e.g., the human body is only partially visible). We validate EgoInfinity across perception fidelity, kinematic feasibility, contact consistency, cross-embodiment generalization, and real-robot skill acquisition (e.g., grasping, cutting, wiping, and pouring), demonstrating a scalable bridge from internet videos to executable robot behavior for open-world robot learning.

Human hand-object demonstrations provide dense reference motions for training dexterous manipulation reinforcement learning (RL) policies through reference tracking. However, to use such demonstrations for RL policy learning, retargeting must preserve hand pose and task-relevant hand-object contact structure. Otherwise, contact and feasibility artifacts can degrade downstream RL policy performance. We introduce TopoRetarget, an interaction-preserving retargeting framework that uses a single set of parameters across diverse retargeting conditions while maintaining task-relevant hand-object interaction and adapting human demonstrations to dexterous robot hands. The method constructs a sparse interaction graph over hand and object keypoints and optimizes distance-weighted Laplacian deformation with directional consistency, kinematic constraints, and penetration handling. Evaluations show that the generated references improve both interaction fidelity and policy learning: TopoRetarget achieves the best contact precision and alignment over all baselines on the ContactPose Dataset, improves Pen-Spin training success by 40.6 percentage points over the existing baseline methods, and enables zero-shot transfer to Wuji Hand hardware on cube reorientation and pen spinning.

Dexterous manipulation is limited by the cost of collecting large-scale robot demonstrations. Egocentric human videos offer a scalable source of diverse manipulation behaviors, but directly using them for robot learning requires bridging two gaps: the visual gap between human and robot observations, and the action gap between human motion and robot-executable action. We propose EgoEngine, a scalable framework for transforming egocentric human manipulation videos into high-fidelity robot data. Given an egocentric RGB video, EgoEngine produces: (i) a high-fidelity robot observation video replacing human with robot while preserving scene context and temporal alignment, and (ii) a task-aligned, executable robot action trajectory under feasibility constraints. Experiments in simulation and on real robots show that EgoEngine enables scalable conversion of human videos into robot data and, to our knowledge, demonstrates the first zero-shot visuomotor dexterous policy learning from egocentric human videos without real-robot demonstrations. Project website: https://egoengine.github.io.

The explosion of generative 3D assets has created a massive demand for animation, yet current motion capture methods remain brittle, restricted to species-specific templates (e.g., SMPL) or requiring labor-intensive manual rigging. We introduce TopoCap, the first unified framework capable of extracting motion from monocular video and retargeting it onto characters with arbitrary, unseen skeletal topologies, i.e., from bipeds to hexapods and inanimate objects, without test-time optimization. Our key insight is that while skeletal structures are combinatorial and discrete, the underlying physics of motion occupy a continuous, low-dimensional manifold. We materialize this insight via a two-stage generative pipeline. First, we learn a Universal Motion Manifold using a Graph CVAE that compresses heterogeneous kinematic chains into a shared, fixed-length latent code. By explicitly conditioning the decoder on a structural embedding of the target rig, we disentangle motion dynamics from skeletal topology. Second, we treat video-to-animation as a conditional flow matching problem, predicting these topology-agnostic codes from visual features. To learn this generalized prior, we introduce Mobjaverse, a massive-scale dataset curated from Objaverse-XL. Comprising over 5,000 unique skeletal topologies and 2 million frames, it exceeds the structural diversity of existing datasets by two orders of magnitude. Extensive experiments demonstrate that \MethodMotion outperforms specialist models on human and quadruped benchmarks while enabling zero-shot retargeting for the long tail of 3D creatures. Dataset is publicly available at https://huggingface.co/datasets/duckduckplz/Mobjaverse.

Learning from human video demonstrations remains challenging due to noisy hand-object interactions, unseen objects with partial observation, and cross-embodiment discrepancy. To address these challenges, we present HOWTransfer (Hand-Object Open-World Transfer), a hand-centric framework that distills human demonstrations into contact-aware, taxonomy-informed, and diverse robotic trajectories. Instead of relying on object-specific descriptions, vision-language queries, or explicit object-state tracking, HOWTransfer recovers temporally consistent 3D hand motion and localizes temporal contact intervals by reasoning over observed hand-object interaction cues. The localized contact onsets are then used to retarget human grasp intent into multi-modal parallel-jaw grasp hypotheses, which are propagated along the recovered wrist trajectory to generate robot-executable motions. Finally, a trajectory editing stage refines contact alignment and produces diverse executable variants from a single demonstration. Experiments across diverse manipulation tasks show that HOWTransfer enables accurate contact localization and high-quality robot motion retargeting with $86\%$ success, which is preferred over teleoperated trajectories in a blinded preference study.

Humanoid behavior foundation models aim to acquire reusable whole-body control policies from broad human motion priors, enabling a single controller to produce diverse and expressive behaviors. However, existing motion-centric foundation policies largely assume that the reference motion is already physically compatible with the robot's surroundings. This assumption breaks when the demonstrator, operator, and robot inhabit different environments: a human motion may specify the intended behavior, but not the footholds, clearance, body height, or contact timing required by the robot's local terrain. We introduce Perceptive Behavior Foundation Model (Perceptive BFM), a terrain-aware humanoid control framework that grounds human motion priors in robot-centric perception. The model preserves raw kinematic motion references as the behavioral interface, while using local terrain observations to adapt contacts, posture, and timing. To provide scalable terrain supervision, we develop terrain-conformal reference synthesis (TCRS), which converts locomotion-oriented human motion clips into terrain-consistent references through contact-aware foothold construction, foot-geometry-aware swing optimization, support-aware root reconstruction, collision repair, and multi-point inverse kinematics. We then train a blind adapted-reference teacher and transfer its terrain-conformal behavior to a deployed raw-reference student through target-frame action alignment. The student is an identity-gated Transformer tracker whose terrain features enter through residual pathways initialized to preserve the motion-tracking prior and trained to produce local corrections only when needed.

Whole-body teleoperation is essential for scalable robot data collection in loco-manipulation tasks, yet existing approaches relying on exoskeleton suits or multi-camera setups impose prohibitive cost, complexity, and environmental constraints. Recent methods using a single extended reality (XR) device with end-to-end reinforcement learning policies partially address these limitations but require robot-specific retraining, suffer from out-of-distribution failures, and rely on motion retargeting that neglects dynamic feasibility. We propose a hierarchical whole-body teleoperation framework driven by a single XR device that generalizes across diverse robot morphologies without retraining robot-specific policies. A Model Predictive Control (MPC)-based motion retargeter jointly optimizes alignment with the operator's intent and the robot's dynamic feasibility, generating optimal commands for existing low-level controllers. To ensure robust online execution, we introduce a state synchronization method that resets the simulator state at each MPC step to handle noisy real-world measurements and contact sensitivity, and integrate SLAM-based global pose feedback to mitigate long-term drift. Simulation results show higher success rates on whole-body control tasks for both a humanoid (over 30% lower completion time and 20% lower power consumption) and a mobile manipulator (zero collisions) compared to baselines. Real-world experiments further validate the effectiveness and flexibility of our method, demonstrating the successful deployment of the proposed retargeter on both platforms for whole-body control tasks and the ease of allowing users to adjust teleoperation behavior based on their preferences. This plug-and-play framework offers a scalable, morphology-agnostic solution for whole-body robot teleoperation, enabling real-time behavioral customization and broad applicability across platforms.

Retargeting human motion to humanoid robots is critical for teleoperation, imitation learning and human-robot interaction. However, it remains challenging because of substantial morphological discrepancies between humans and robots, including differences in skeletal topology, limb proportions and degrees of freedom, as well as the scarcity of paired motion data. This paper presents Human2Humanoid, an unsupervised motion retargeting framework that transfers human motions to humanoid robot behaviors with high fidelity. To bridge the domain gap under unpaired data, we adopt a CycleGAN-based architecture equipped with a skeleton-aware graph convolutional network to capture topology-dependent motion features. To address cross-domain scale mismatches, we introduce a morphology-invariant end-effector consistency loss that aligns normalized end-effector trajectories to preserve motion semantics across embodiments. To improve physical plausibility and reduce contact artifacts, we impose explicit physics-aware feasibility constraints to encourage reproduction of the contact patterns in the source motion. Experimental results show that the proposed method successfully retargets human motion to the Unitree G1 humanoid robot without paired data, and outperforms existing methods in both downstream controllability and physical feasibility.

This paper presents the real-time retargeting guidance policy developed for the Chandrayaan-3 lunar landing mission. The baseline guidance generates approximate fuel-optimal descent trajectories, while a high-level policy enables safe retargeting to alternate sites when the nominal site becomes infeasible. The retargeting strategy leverages a convex representation of the controllability boundary, allowing rapid feasibility checks and real-time target updates. To the best of the authors knowledge, this represents the first application of a data-driven retargeting framework in an operational lunar landing mission. Pre-flight simulations and Chandrayaan-3 flight results validate the effectiveness of the proposed approach.

Imitation Learning from monocular video demonstrations provides a scalable approach for teaching complex skills to humanoid robots. However, translating human motion to humanoids requires overcoming significant morphological mismatches. Standard approaches rely on Geometric Retargeting or Indirect Dynamic Retargeting pipelines. We identify that these intermediate kinematic projections introduce a geometric bias, restricting the search space and yielding suboptimal dynamic behaviors. In this paper, we propose Direct Dynamic Retargeting (DDR), a novel single-stage framework that generates high-fidelity, dynamically feasible trajectories directly from expert videos. By formulating the problem in the task space and leveraging a sampling-based Model Predictive Control solver within a physics simulator, DDR natively optimizes over complex contact sequences while mitigating input drift. Our experiments demonstrate that bypassing the geometric bias allows DDR to outperform state-of-the-art baselines in demonstration tracking accuracy. Furthermore, we establish that providing such physically viable references to RL agents accelerates training convergence and enhances the final execution of agile and balancing behaviors. Source code will be made publicly available.

Retargeting motion across characters with varying body shapes while preserving interaction semantics, such as self-contact and near-body proximity, remains a challenging problem. While recent geometry-aware approaches address this by maintaining spatial relationships between predefined corresponding regions, their reliance on static correspondences often struggles when the target character exhibits exaggerated body proportions. In this paper, we present a geometry-aware motion retargeting framework that preserves interaction semantics by performing proximity matching over spatially adaptive anchors. Unlike prior methods with static anchor definitions, the proposed method dynamically repositions anchors to reachable regions on the target character. This is achieved via a Transformer-based anchor refinement strategy that predicts anchor displacements and constrains the translated anchors to remain on the target character geometry through differentiable soft projection. By incorporating pose-dependent spatial structures from the source character, the adapted anchors provide structurally coherent guidance for interaction-aware retargeting. Conditioned on these anchors, a graph-based autoencoder predicts target skeletal motion that preserves the spatial configuration of the source. To encourage task-aligned optimization between anchor adaptation and motion retargeting, we adopt an alternating training scheme in which each module is optimized in turn. Through extensive evaluations, we demonstrate that our method outperforms state-of-the-art approaches in preserving interaction fidelity across diverse character geometries.

We study the problem of directly deriving an initial human reenactment from a monocular video of a non-human character. Our goal is not to reconstruct the source character itself but to reinterpret its motion as a plausible and editable human performance for downstream animation authoring. This task is challenging because existing video-based motion capture methods are largely restricted to human-centric structural spaces, while motion retargeting methods typically require structured 3D source motions and known source topologies. Our key insight is that sparse local articulated motion cues can preserve essential dynamics across large structural differences, providing a stable bridge from character video to human reenactment. Based on this observation, we propose AnyAct, which formulates character-video-driven human reenactment as conditional human motion generation from transferable sparse local 2D articulated motion. To make this practical, we introduce three key designs: human-motion-only supervision via augmented 3D-to-2D projection, progressive 3D-to-2D training to alleviate conditioning ambiguity, and global-local motion decoupling for reliable local motion control. We further construct a benchmark primarily covering diverse non-human character videos. Experiments on the benchmark show that AnyAct produces high-fidelity initial human reenactments that preserve the essential dynamics of the characters in reference videos, and further ablation studies validate the effectiveness of its core designs.

Stable, low-latency whole-body teleoperation of humanoid robots is an open research challenge, complicated by kinematic mismatches between human and robot morphologies, accumulated inertial sensor noise, non-trivial control latency, and persistent sim-to-real transfer gaps. This paper presents a complete real-time whole-body teleoperation system that maps human motion, recorded with a Virdyn IMU-based full-body motion capture suit, directly onto a Unitree G1 humanoid robot. We introduce a custom motion-processing, kinematic retargeting, and control pipeline engineered for continuous, low-latency operation without any offline buffering or learning-based components. The system is first validated in simulation using the MuJoCo physics model of the Unitree G1 (sim2sim), and then deployed without modification on the physical platform (sim2real). Experimental results demonstrate stable, synchronized reproduction of a broad motion repertoire, including walking, standing, sitting, turning, bowing, and coordinated expressive full-body gestures. This work establishes a practical, scalable framework for whole-body humanoid teleoperation using commodity wearable motion capture hardware.

Dexterous teleoperation via Mixed Reality (MR)-based interfaces offers a scalable paradigm for transferring human manipulation skills to dexterous robot hands. However, conventional retargeting approaches that minimize kinematic dissimilarity (e.g., joint angle or fingertip position error) often fail in contact-rich rotational manipulation, such as cap opening, key turning, and bolt screwing. This failure stems from the embodiment gap: mismatched link lengths, joint axes/limits, and fingertip geometry can cause direct pose imitation to induce tangential fingertip sliding rather than stable object rotation, resulting in screw axis drift, contact slip, and grasp instability. To address this, we propose DexTwist, a functional twist-retargeting framework for MR-based dexterous teleoperation. DexTwist detects a tripod pinch, estimates the operator's intended screw axis and twist magnitude, and applies a real-time residual joint-space refinement that tracks turning progress while regularizing the robot tripod geometry. The refinement minimizes a virtual-object objective defined by turning angle, screw axis consistency, fingertip closure, and tripod stability. Simulation and real-world experiments show that DexTwist improves turning angle tracking and screw axis stability compared with a vector-based retargeting baseline.

Retargeting human kinematic reference motion onto a robot's morphology remains a formidable challenge. Existing methods often produce physical inconsistencies, such as foot sliding, self-collisions, or dynamically infeasible motions, which hinder downstream imitation learning. We propose a bilevel optimization framework that jointly adapts reference motions to a robot's morphology while training a tracking policy using reinforcement learning. To make the optimization tractable, we derive an approximate gradient for the upper-level loss. Our framework requires only a sparse set of semantic rigid-body correspondences and eliminates the need for manual tuning by identifying optimal values for a parameterization expressive enough to preserve characteristic motion across different embodiments. Moreover, by integrating retargeting directly with physics simulation, we produce physically plausible motions that facilitate robust imitation learning. We validate our method in simulation and on hardware, demonstrating challenging motions for morphologies that differ significantly from a human, including retargeting onto a quadruped.

Motion retargeting from humans to human-like artificial agents is becoming increasingly important as humanoid robots grow more capable. However, most existing approaches focus only on reproducing kinematics and ignore the rich sensorimotor experience associated with human movement. In this work, we present a framework for simulating the multimodal sensorimotor experiences of infants using physical and virtual humanoids. From a single video, our method reconstructs the infant's body configuration by extracting its skeletal structure and estimating the full 3D pose from each frame. Then we map the reconstructed motion onto several developmental platforms: the physical iCub robot and the virtual simulators pyCub, EMFANT and MIMo. Replaying the retargeted motions on these embodiments produces simulated multisensory streams including proprioception (joints and muscles), touch, and vision. For the best-matching embodiment, the retargeting achieves sub-centimeter accuracy and enables a rich multimodal analysis of infant development as well as enhanced automated annotation of behaviors. This framework provides a unique window into the infant's sensorimotor experience, offering new tools for robotics, developmental science, and early detection of neurodevelopmental disorders. The code is available at https://github.com/ctu-vras/motion-retargeting/.

Text-driven motion editing and intra-structural retargeting, where skeletons share topology but may differ in bone lengths and rest pose, are traditionally handled by fragmented pipelines with incompatible inputs and representations: editing relies on specialized generative steering, while retargeting is deferred to geometric post-processing. We present a unified conditional-flow framework that casts generation, semantic editing, and intra-structural retargeting as condition-modulated transport within one text- and skeleton-conditioned rectified-flow model. Under this formulation, editing changes the semantic condition while preserving skeletal structure, whereas retargeting changes the skeletal condition while preserving motion semantics. This makes FlowEdit-style transport a unified inference rule for motion manipulation rather than a task-specific editor. To instantiate this for articulated 3D motion, we develop a text- and skeleton-conditioned rectified-flow transformer. The model uses per-joint tokenization and explicit joint self-attention to capture spatial kinematic dependencies. We further inject text conditions at both joint and frame levels, while residual multi-condition classifier-free guidance balances text adherence and skeletal conformity. Experiments on SnapMoGen and a multi-character Mixamo subset show that one trained model supports text-to-motion generation, zero-shot editing, and zero-shot intra-structural retargeting without task-specific fine-tuning. This unified framework replaces separate pipelines with a single conditional motion transport model while keeping the same-topology retargeting scope explicit.

We introduce SoftAct, a framework for teaching soft robot hands to perform human-like manipulation skills by explicitly reasoning about contact forces. Leveraging immersive virtual reality, our system captures rich human demonstrations, including hand kinematics, object motion, dense contact patches, and detailed contact force information. Unlike conventional approaches that retarget human joint trajectories, SoftAct employs a two-stage, force-aware retargeting algorithm. The first stage attributes demonstrated contact forces to individual human fingers and allocates robot fingers proportionally, establishing a force-balanced mapping between human and robot hands. The second stage performs online retargeting by combining baseline end-effector pose tracking with geodesic-weighted contact refinements, using contact geometry and force magnitude to adjust robot fingertip targets in real time. This formulation enables soft robotic hands to reproduce the functional intent of human demonstrations while naturally accommodating extreme embodiment mismatch and nonlinear compliance. We evaluate SoftAct on a suite of contact-rich manipulation tasks using a custom non-anthropomorphic pneumatic soft robot hand. SoftAct's controller reduces fingertip trajectory tracking RMSE by up to 55 percent and reduces tracking variance by up to 69 percent compared to kinematic and learning-based baselines. At the policy level, SoftAct achieves consistently higher success in zero-shot real-world deployment and in simulation. These results demonstrate that explicitly modeling contact geometry and force distribution is essential for effective skill transfer to soft robotic hands, and cannot be recovered through kinematic imitation alone. Project videos and additional details are available at https://soft-act.github.io/.

Dexterous hand teleoperation requires motion re-targeting methods that simultaneously achieve high-frequency real-time performance and enforcement of heterogeneous kinematic and safety constraints. Existing nonlinear optimization-based approaches often incur prohibitive computational cost, limiting their applicability to kilohertz-level control, while learning-based methods typically lack formal safety guarantees. This paper proposes a scalable motion retargeting framework that reformulates the nonlinear retargeting problem into a convex quadratic program in joint differential space. Heterogeneous constraints, including kinematic limits and collision avoidance, are incorporated through systematic linearization, resulting in improved computational efficiency and numerical stability. Control barrier functions are further integrated to provide formal safety guarantees during the retargeting process. The proposed framework is validated through simulations and hardware experiments on the Wuji Hand platform, outperforming state-of-the-art methods such as Dex-Retargeting and GeoRT. The framework achieves high-frequency operation with an average latency of 9.05 ms, while over 95% of retargeted frames satisfy the safety criteria, effectively mitigating self-collision and penetration during complex manipulation tasks.

Humanoid robots have the promise of locomoting like humans, including fast and dynamic running. Recently, reinforcement learning (RL) controllers that can mimic human motions have become popular as they can generate very dynamic behaviors, but they are often restricted to single motion play-back which hinders their deployment in long duration and autonomous locomotion. In this paper, we present a pipeline to dynamically retarget human motions through an optimization routine with hard constraints to generate improved periodic reference libraries from a single human demonstration. We then study the effect of both the reference motion and the reward structure on the reference and commanded velocity tracking, concluding that a goal-conditioned and control-guided reward which tracks dynamically optimized human data results in the best performance. We deploy the policy on hardware, demonstrating its speed and endurance by achieving running speeds of up to 3.3 m/s on a Unitree G1 robot and traversing hundreds of meters in real-world environments. Additionally, to demonstrate the controllability of the locomotion, we use the controller in a full perception and planning autonomy stack for obstacle avoidance while running outdoors.

Humanoid robots require diverse motor skills to integrate into complex environments, but bridging the kinematic and dynamic embodiment gap from human data remains a major bottleneck. We demonstrate through Hessian analysis that traditional optimization-based retargeting is inherently non-convex and prone to local optima, leading to physical artifacts like joint jumps and self-penetration. To address this, we reformulate the targeting problem as learning data distribution rather than optimizing optimal solutions, where we propose NMR, a Neural Motion Retargeting framework that transforms static geometric mapping into a dynamics-aware learned process. We first propose Clustered-Expert Physics Refinement (CEPR), a hierarchical data pipeline that leverages VAE-based motion clustering to group heterogeneous movements into latent motifs. This strategy significantly reduces the computational overhead of massively parallel reinforcement learning experts, which project and repair noisy human demonstrations onto the robot's feasible motion manifold. The resulting high-fidelity data supervises a non-autoregressive CNN-Transformer architecture that reasons over global temporal context to suppress reconstruction noise and bypass geometric traps. Experiments on the Unitree G1 humanoid across diverse dynamic tasks (e.g., martial arts, dancing) show that NMR eliminates joint jumps and significantly reduces self-collisions compared to state-of-the-art baselines. Furthermore, NMR-generated references accelerate the convergence of downstream whole-body control policies, establishing a scalable path for bridging the human-robot embodiment gap.

Parametric human body models are foundational to human reconstruction, animation, and simulation, yet they remain mutually incompatible: SMPL, SMPL-X, MHR, Anny, and related models each diverge in mesh topology, skeletal structure, shape parameterization, and unit convention, making it impractical to exploit their complementary strengths within a single pipeline. We present SOMA, a unified body layer that bridges these heterogeneous representations through three abstraction layers. Mesh topology abstraction maps any source model's identity to a shared canonical mesh in constant time per vertex. Skeletal abstraction recovers a full set of identity-adapted joint transforms from any body shape, whether in rest pose or an arbitrary posed configuration, in a single closed-form pass, with no iterative optimization or per-model training. Pose abstraction inverts the skinning pipeline to recover unified skeleton rotations directly from posed vertices of any supported model, enabling heterogeneous motion datasets to be consumed without custom retargeting. Together, these layers reduce the $O(M^2)$ per-pair adapter problem to $O(M)$ single-backend connectors, letting practitioners freely mix identity sources and pose data at inference time. The entire pipeline is fully differentiable end-to-end and GPU-accelerated via NVIDIA-Warp.

Human motion provides rich priors for training general-purpose humanoid control policies, but raw demonstrations are often incompatible with a robot's kinematics and dynamics, limiting their direct use. We present a two-stage pipeline for generating natural and dynamically feasible motion references from task-space human data. First, we convert human motion into a unified robot description format (URDF)-based skeleton representation and calibrate it to the target humanoid's dimensions. By aligning the underlying skeleton structure rather than heuristically modifying task-space targets, this step significantly reduces inverse kinematics error and tuning effort. Second, we refine the retargeted trajectories through progressive kinodynamic trajectory optimization (TO), solved in three stages: kinematic TO, inverse dynamics, and full kinodynamic TO, each warm-started from the previous solution. The final result yields dynamically consistent state trajectories and joint torque profiles, providing high-quality references for learning-based controllers. Together, skeleton calibration and kinodynamic TO enable the generation of natural, physically consistent motion references across diverse humanoid platforms.