Multimodal Object Detection

Reliable 3D person detection is important for rescue robotics to give first responders situational awareness. Yet most multimodal 3D detection research targets automotive scenarios in which pedestrians mostly appear in a narrow range of upright, near-road poses. It is therefore unclear how much of the reported performance transfers to rescue settings, as a person may be lying, partially occluded, or in unstructured indoor and outdoor environments. To investigate this gap, we introduce TriSAR-3D, a multimodal person detection dataset recorded with a high-resolution 128-channel LiDAR, an RGB camera, and a thermal camera. It captures varied poses in indoor as well as outdoor locations at different times of day to study their influence on 3D object detector performance. Furthermore, we propose a novel trimodal 3D detection pipeline, PaintFusion, that fuses PointPainting-based evidence using a simple MLP. We show that the derived method reaches 65.4 AP@50 and thereby outperforms strong LiDAR-only (CenterPoint, 53.4), RGB+LiDAR (BEVFusion, 60.5), and adapted trimodal (Tri-BEVFusion, 60.7) baselines on the dataset. At the same time, it is substantially faster than other fusion-based methods such as BEVFusion, with a per-frame latency of 51.6 ms compared to 101 ms. Additionally, we test how the performance of different 3D object detectors generalizes to unseen pose categories. Removing lying instances from training data collapses the lying-pose AP@50 to near zero across all evaluated detectors. The results indicate that dataset diversity exerts a large effect on 3D object detection performance. The dataset and code are available at https://github.com/MarkusKramer1/3D-Trimodal-People-Detection.

Reliable detection of pedestrians and road users is essential for the safe operation of autonomous vehicles. However, this task becomes increasingly challenging under adverse environmental conditions, such as poor weather and low lighting, where the performance of state-of-the-art pre-trained object detectors and on-board sensors tends to degrade, which limits their effectiveness and reliability. Moreover, retraining models for each operating context imposes significant constraints due to high data requirements, computational resources, and time. Considering this, we propose a novel context-aware multimodal late fusion approach that integrates a lightweight gating network within our probabilistic calibration framework. The gating network extracts environmental context and dynamically modulates the detection outputs of pre-trained object detectors based on the inferred context, without retraining of the detectors. Our methodology is evaluated on a modified KITTI dataset, in which the camera images and lidar pointclouds are augmented for varying fog levels. Experimental results show that our approach yields an approximately 14% relative improvement over non-adaptive late fusion baselines, achieving a consistent average precision of 56% across different fog levels.

Open-prompt detectors allow users to specify targets with text, visual exemplars, or both. We argue that existing designs underuse the visual modality in two ways. First, multiple exemplars are commonly compressed into a single class-level embedding. This textualizes visual prompting: the resulting vector plays the role of another class name, is often aligned to or injected into the text pathway, and may be suboptimal when only a few heterogeneous exemplars are available. Second, existing methods interact primarily in prompt or representation space, before modality-specific detection states are formed. We address both issues from a set perspective: \setopd preserves modality-specific decoding states from a shared prompt-conditioned initialization and performs explicit multimodal collaboration at the candidate-state level. For the first issue, we introduce \br prompting, which reads every boxed exemplar in its full scene context and decomposes the pooled support evidence into a Base anchor and a learned Residual correction; the resulting prompt has fixed capacity regardless of the number of examples and drives its own visual detection pathway. For the second, we recast text--visual collaboration from representation-level fusion into a candidate-set modeling problem. Paired-Query Arbitration (\pqa) then performs explicit cross-modal state arbitration only after modality-specific candidate states have been formed. The two readers share query initialization so their candidates are paired by index; a learned gate arbitrates within each pair, followed by a permutation-equivariant module that reasons over the fused set.

4D radar complements dense image semantics with long-range geometry and radial motion, but existing radar--camera detectors largely solve where to align the modalities while leaving whether a piece of evidence supports an evolving object hypothesis implicit. An image token may describe an occluder, a nearby radar return may belong to another object, and a pose-aligned memory slot may carry incompatible motion. We formulate hypothesis-conditioned evidence grounding, which separates candidate access from evidence use: semantic, geometric, or temporal evidence is filtered or conditioned by the evolving 3D state before updating the corresponding query. \sgdetpp{} instantiates this principle through Anchor-Grounded Semantic Retrieval (AGR), which conditions deformable image retrieval on pooled anchor-consistent radar support; Geometry-Consistent Anchor Refinement (GCR), which attentively aggregates individual associated returns; and Doppler-Verified Correspondence (DVC), which replaces history only when current radial motion contradicts it. \sgdetpp{} improves the strongest compared method by 3.82 mAP and 6.82 ODS on OmniHD-Scenes and by 6.82 mAP and 9.22 NDS on ManTruckScenes, while also leading the listed methods in the TJ4DRadSet test comparison. Mechanism-targeted evaluations show that AGR improves strict AP in every projected-occlusion bin, the yaw-aligned box gate raises target-return purity from 29.95% to 58.87%, and DVC preserves 96.11% of motion-consistent history while retaining 75.90% contradiction recall. Code will be released.

The Mobile Unified Multimodal Understanding (MUMU) Challenge requires a single efficient model to jointly perform multi-concept image tagging, open-vocabulary object detection, and image captioning. We present Efficient Unified Multimodal Understanding (EUMU), the winning solution for the MUMU Track of the 8th LSVOS Challenge. EUMU builds on a shared pretrained multimodal model, using its prompt-based capabilities for detection and captioning and training lightweight heads on shared visual features to predict quality, scene, and event tags. Rather than treating the three tasks independently, EUMU applies task-aware inference refinement by reusing task outputs as cross-task cues. For detection, caption cues help recover objects missed by the initial detection. For captioning, detection cues help refine the caption to better reflect the detected objects. For tagging, image statistics refine quality predictions, while caption and detection cues refine scene and event predictions. This design unifies all three tasks within a single model while satisfying the challenge's resource constraints. EUMU contains 239.169M parameters, requires 23.947 GFLOPs, uses 4.5 GB of peak inference memory, and achieves a final challenge score of 17.3409. Code and models are available at https://github.com/Dayoung-Kil/EUMU.

Camouflaged object detection (COD) is an important engineering task in intelligent optical perception, but it remains challenging when targets closely resemble their surroundings. Polarization imaging provides complementary physical cues, whereas existing methods typically assume fixed multimodal input configurations and entangle intra-polarization coordination with interaction between red-green-blue (RGB) and polarization representations. We propose LGFN, a lightweight gated RGB-polarization fusion framework supporting separately optimized RGB-only and polarization-assisted configurations. A deterministic Modality Router selects the appropriate configuration according to polarization availability. In the multimodal configuration, an availability-conditioned Modality Gate calibrates the available polarization branches; the Gated Polarization Hub coordinates learned degree of linear polarization (DoLP) and angle of polarization (AoP) representations with explicit polarization cues; and RGB-Polarization Cross Fusion introduces the coordinated representation into the RGB hierarchy through controlled residual interaction. The multimodal configuration requires neither sample-dependent statistics nor handcrafted quality descriptors during inference. On the complete 230-image PCOD_1200 test set, the RGB-only configuration achieves a mean absolute error of 0.0090, a Dice score of 0.8806, and an intersection over union of 0.8144, obtaining the best results on all six metrics among the evaluated RGB-based methods. Under a common local reevaluation protocol, the multimodal configuration outperforms PolarNet and IPNet on all six metrics. Relative to IPNet, it reduces the parameter count, floating-point operations, and latency by 53.1%, 73.6%, and 63.0%, respectively. The source code will be available at https://github.com/1hzf/LGFN.

Real-world detectors must often interpret functional or ambiguous prompts, yet conventional models such as YOLO remain restricted to fixed class lists. Even open-vocabulary models like YOLO-World frequently misalign vague language with the intended objects. Building on our prior work Commonsense-Guided Open-World Object Detection Using LLMs and Visual-Semantic Matching, we address YOLO-World's limitations in grounding task-driven queries. We propose Vague2Detect, a hybrid pipeline in which a fine-tuned Sentence-BERT retrieves candidates from a structured household Knowledge Base (KB), and YOLO-World verifies their presence in the image. For prompts outside the KB, a large language model (GPT-3.5-turbo) generates candidate descriptions, dynamically expanding the KB to cover novel concepts. On a benchmark of household scenes using custom images and an Open Images V7 subset, YOLO-World alone achieves only 32% Vague Prompt Success Rate (VPSR), the ability to map ambiguous queries to correct detections. In contrast, Vague2Detect improves performance to 61% VPSR with high precision, and up to 85% when augmented with GPT fallback.

Open World Object Detection (OWOD) built on multimodal foundation models often suffers from semantic ambiguity caused by unidirectional text-to-vision matching, while rigid outlier penalties may over-suppress unknown objects near known-class decision boundaries. We propose CODE (Cross-Modal Calibration and Dynamic Suppression), a unified inference-time framework with three complementary components. Cross-Modal Joint Confidence Calibration injects global visual prototypes to calibrate text-driven known-class predictions. Uncertainty-Guided Universal Objectness Enhancement measures classification hesitation from local visual responses to strengthen potential unknown objects. Dynamic Outlier Suppression via Confidence Margin replaces rigid suppression with a margin-aware adjustment that preserves ambiguous out-of-distribution instances. Experiments on the Real-World Detection benchmark demonstrate that, with the OWL-ViT L/14 backbone, CODE achieves 21.7 U-mAP and 40.8 K-mAP in Task 1, surpassing the previous state of the art by 2.6 and 2.3 points, respectively.

Underwater unimodal object detection faces many challenges in sensor imaging, such as optical images limited by underwater noise and visible distance, and sonar images limited by less object structural information. While, optical images have rich object structural information, and sonar images are less affected by underwater noise and have a longer visible distance. Optical (RGB modality) and sonar (Sonar modality) images have complementary information underwater. In this paper, we create an RGB-Sonar multimodal object detection dataset, RGB-Sonar Fusion (RSFusion) and propose evaluation metrics for the benchmark. And we propose the RGB-Sonar Fusion Detector (RSFusionDet) with a new RGB-Sonar multimodal object detection result expression for RGB-Sonar multimodal object detection. We analyze the features of RGB and Sonar modal information, and design a Cross-Attention Fusion (CAFusion) module to fuse RGB-Sonar spatial misalignment features and Object Matching Head (OMHead) with Loss (OMLoss) to match identical objects in RGB-Sonar modalities. Our RSFusionDet achieves 76.4/48.6 AP (RGB/Sonar) for object detection and 83.4 $\text{F1-Score}_{match}$ for object matching, on RSFusion, which outperforms other object detection models. Compared with the DINO baseline, our method improves by 0.7/1.4 AP (RGB/Sonar) while simultaneously providing reliable cross-modal object matching. The code and datasets are publicly available at https://github.com/LEFTeyex/RSFusionDet.

Multi-modal object detection is essential for robust scene understanding in challenging conditions, including low-light and adverse environments. Recent vision foundation models (e.g., DINOv3) have exhibited strong representation capabilities, yet adapting them to multi-modal scenarios remains challenging. Existing dense cross-modal fusion strategies often force heterogeneous modalities to interact indiscriminately, which may introduce redundant information and disrupt the valuable pre-trained representations. To address this issue, we revisit multi-modal fusion from the perspective of socialized learning and propose adapter to DINOv3 (A2DINOv3), a multi-expert collaboration framework with a Socialized Collaboration Protocol (SCP). Specifically, RGB and infrared branches are modeled as heterogeneous experts that independently preserve their specialized knowledge while exchanging complementary information through selective and constrained interactions. This design mitigates harmful cross-modal interference and prevents degradation of pre-trained priors during adaptation. Furthermore, a zero-initialization strategy is introduced to gradually activate cross-modal collaboration, enabling a smooth transition from modality-specific learning to cooperative representation learning. Extensive experiments on four multi-modal benchmarks, including aerial detection (GAIIC), autonomous driving (FLIR), low-light surveillance (LLVIP), and diverse real-world scenarios (M3FD), demonstrate that A2DINOv3 consistently achieves state-of-the-art performance in multi-modal object detection.

Multimodal object detection in remote sensing faces challenges due to semantic heterogeneity and modality-specific noise interference. To this end, we propose SuppreSensing, which reformulates multimodal fusion as a selective collaboration process that jointly models shared information and modality-specific cues. SuppreSensing first designs an Expert-driven Multimodal Feature Recalibration (EMFR) module, which reformulates shared-consensus extraction as an input-adaptive multi-expert selection process to alleviate the symmetry trap in multimodal fusion. Complementing this, a modality-specific attribute augmentation strategy is employed to enhance specific modality features by modeling bidirectional discrepancy patterns, mitigating cross-modal heterogeneity. Furthermore, we propose an Expert-driven Customized Feature Purification (ECFP) module based on a "specialized inspection-comprehensive analysis-diagnostic update" physical examination paradigm to iteratively filter redundancies and reinforce task-relevant semantics. Extensive experiments on the DroneVehicle and VEDAI datasets demonstrate that SuppreSensing achieves state-of-the-art detection performance. Cross-domain evaluations on natural scene datasets (FLIR and LLVIP) further validate its superior robustness and generalization capability across diverse environmental conditions.

RGB-Thermal (RGBT) object detection enables robust perception in complex scenes by leveraging the complementary strengths of visible textures and thermal cues. However, existing methods mainly rely on dense cross-modal interactions over full-resolution features, which inevitably introduce background interference and hinder the learning of target-relevant representations. In this paper, we propose the Prototype HyperGraph Fusion Network (ProtoHGF-Net), a novel framework that redefines cross-modal fusion as prototype-level semantic interaction rather than the dense cross-modal interaction paradigm. Specifically, we design Prototype HyperGraph Fusion to perform cross-modal interaction in a compact prototype-level semantic space. This design enables more selective fusion among target-relevant prototypes. To support this prototype-level fusion, we propose Teacher-Mask Calibration Distillation, which calibrates modality features before fusion using modality-specific teachers and target-aware masks. This strategy suppresses backgrou- nd-dominant responses and produces more target-focused features. Extensive experiments on DroneVehicle, DVTOD, and FLIR demonstrate that ProtoHGF-Net achieves state-of-the-art performance with 85.9% $mAP_{50}$, 88.2% $mAP_{50}$, and 79.1% $mAP_{50}$, respectively. Our code is available at GitHub.

Multimodal object detection proves effective in remote sensing, especially the RGB-Infrared paradigm. The parallel feature extractors provide rich multimodal information for robust detection, yet introduce substantial channel redundancy and computational overhead. Existing pruning methods can reduce channel redundancy, but they are designed for unimodal backbones, overlooking cross-modal interactions and dynamic scene-wise redundancy. In this paper, we propose InterPruner, the first interactive structured channel pruning framework for RGB-infrared object detectors. Specifically, we first derive a Taylor-Implicit Criterion(TIC) to quantify channel importance via high-order Taylor expansion and the implicit function theorem. Then, a Modality Interaction Redundancy Analyzer (MIRA) identifies redundant channels via mutual compensability assessment. Finally, a Scene-Prior Channel Anchor (SPCA) uses language priors as semantic anchors to measure channel-scene relevance for dynamic channel importance estimation. Cross-modality channel pruning for RGB-Infrared detection is yet unexplored. Extensive experiments on RGB-infrared object detection dataset demonstrate that InterPruner maintains high performance with negligible degradation. Specifically, it even achieves a 0.6% mAP increase on the FLIR dataset when pruning 50% of the channels. Code will be available on GitHub to facilitate future work.

Deep multimodal fusion for object detection has demonstrated good performance through mining modal characteristics. However, existing feature-level fusion methods mainly weigh between two modalities and unify them in a unified representation space. This can lead to overfitting or over-specialization of the statistical properties of a single modality within a dual-backbone architecture. This paper proposes an Attention-Driven Complementarity Resampling framework for robust improvement of cross-modality object detection. Based on a shared channel spatial attention mechanism, we first introduce the semantic mask exchange to actively mix the boundaries of the modalities during the training phase, forcing the backbone network to learn generalized features without relying on fixed modal labels. Then we propose a learnable channel competition to sample and aggregate features in a channel-wise and learnable way. Our experiments on multiple datasets demonstrate that the proposed method is effective and yields competitive results among existing state-of-the-art approaches. The source code is provided in the supplementary material.

Open-world object detection (OWOD) requires a detector to recognize known categories, discover unnamed objects from unseen categories, and incrementally learn newly annotated classes. PROB improves unknown discovery by modeling class-agnostic probabilistic objectness in the decoder-query space. However, visual objectness alone cannot determine whether an object-like query corresponds to a hard known instance, an unseen-category object, or background clutter, resulting in an ambiguous known-unknown decision boundary. We propose MSPO, a lightweight semantic calibration framework that augments PROB with task-aware known-category language priors while preserving its detector architecture and incremental learning protocol. For each currently known category, MSPO constructs an extended text description covering category attributes, visual appearance, typical scenes, and functional usage, and encodes it using a frozen CLIP text encoder. Decoder query features are projected into the same semantic space to estimate their support from the current known-category semantics. This semantic evidence is fused with PROB's visual objectness to calibrate known and unknown predictions without turning OWOD into open-vocabulary classification. Importantly, MSPO never uses future-category names, and all unseen categories remain unnamed during evaluation. Experiments on M-OWODB and S-OWODB show that MSPO improves the strong PROB baseline on the main aggregate metrics while retaining competitive unknown recall. It also improves early unknown-confusion metrics and raises PASCAL VOC final mAP by up to 2.7 points. These results demonstrate that known-category language semantics provide an effective calibration signal for probabilistic objectness under the standard OWOD setting.

Event cameras capture sparse brightness changes with high temporal resolution and high dynamic range, compensating for the deficiencies of the conventional RGB frames. However, previous multi-modal fusion techniques typically fail to handle the inherent heterogeneity between RGB frames and event streams, thus easily leading to noise amplification or redundant feature integration during cross-modal fusion. In this paper, we propose a Cross-Modal information inTeraction transFormer, coined as CMTFormer, which hierarchically integrates RGB and event information to achieve efficient and stable multimodal collaboration. Specifically, we design a shallow-to-deep information interaction scheme. In the shallow stage, we present the Shallow Alignment Module (SAM) to achieve an efficient fusion of RGB and event low-level features, which mitigates attribute disparities and prevents noisy information. In the middle stage, we devise the Cross-modal Enhancement Module (CEM) that utilizes texture and edge information to produce mutually reinforced middle-level features. In the deep stage, we present the Learnable Deep Fusion Module (LDFM) which performs high-level information aggregation through learnable weights, thus enabling the network to adaptively fuse RGB and event clues. A Spatial Prior Module is further designed to utilize global spatial information to enhance localization accuracy. Extensive experiments are conducted on two prevalent event-based object detection benchmarks, i.e., DSEC-Detection and PKU-DAVIS-SOD. Our CMTFormer consistently surpasses the detection counterparts in both uni-modal and multi-modal settings, strongly demonstrating the effectiveness of our paradigm. Codes will be available upon publication.

Effective cross-modal feature alignment and interaction are central challenges in multispectral object detection. Although global cross-attention provides strong long-range modeling ability, its quadratic complexity with respect to feature size limits deployment on resource-constrained platforms. We therefore propose Progressive Pixel-Neighborhood Deformable Cross-Attention for multispectral feature fusion, termed PNAFusion. The proposed framework is motivated by two observations: weak misalignment between visible and thermal images is usually concentrated around local neighborhoods, and semantic correspondence across modalities often follows non-linear spatial mappings that fixed receptive fields cannot model well. To address these issues, PNAFusion incorporates local spatial priors into its architectural design to concentrate feature interaction and alignment on the most relevant neighborhoods. Specifically, a Pixel-Neighborhood Cross-Attention (PNCA) module is introduced to avoid redundant global feature matching and suppress background noise. Meanwhile, an Adaptive Deformable Alignment (ADA) module captures non-linear spatial correspondences through learned pixel-wise offsets. These components are further integrated through an iterative feedback mechanism to progressively refine cross-modal feature alignment. Experiments on FLIR, M3FD, and DroneVehicle show that PNAFusion achieves 84.2, 90.5, and 85.5 [email protected], respectively, under the YOLOv5 detector, and further reaches 86.8 [email protected] on FLIR and 90.8 [email protected] on M3FD when transferred to Co-DETR. Efficiency analysis indicates that PNAFusion reduces allocated GPU memory by 33.0% compared with ICAFusion and reduces theoretical FLOPs from 194.8 G to 156.4 G, although the deformable sampling and iterative refinement introduce additional latency. Our code will be available at https://github.com/DanielQiuTian/PNAFusion.

Open-domain open-vocabulary detection (ODOVD) requires detectors to generalize to both novel categories and unseen domains, making it more challenging than open-vocabulary detection. Existing methods typically train open-vocabulary detectors together with domain generalization modules from scratch, leading to high training cost. we propose ExDet, a lightweight category-domain collaborative generalization framework for ODOVD that enhances the cross-category and cross-domain generalization of existing detectors. ExDet consists of Text-Guided Extrapolation (TGE), a lightweight Detector-Compatible Rectification (DCR) module, and ExRPN. Specifically, TGE exploits the DeltaSpace property of vision-language models (VLMs) to infer category- and domain-aware proxy visual prototypes from text. DCR is learned from the TGE-generated prototypes in a detector training-free and real-data-free manner, and is inserted after the classification head at inference to rectify representations toward a detector-compatible source-domain visual distribution, thereby enhancing classification for targets from novel categories and unseen domains. ExRPN recalibrates proposal scores by combining semantic similarity with RPN confidence, improving recall for novel and domain-shifted objects while providing better support for subsequent classification and DCR. ExDet achieves SOTA performance on OD-LVIS, OV-LVIS, Objects365, and MSOSB.

Multimodal 3D object detection based on LiDAR and cameras has demonstrated excellent performance in ground-vehicle scenarios, but has not been explored for Unmanned Aerial Vehicle (UAV) platforms. In UAV top-down scenes, frequent groundobject occlusion dominated by tree canopies causes spatially varying and modality-dependent information degradation. Existing multimodal fusion frameworks neither explicitly model such ground-object occlusion nor embed occlusion awareness into the detection pipeline, limiting their performance in occluded UAV scenes. To address these challenges, we propose CAMF-Det, a closure-aware multimodal fusion framework for LiDAR-camera 3D object detection on UAV platforms, which derives dual-modal occlusion intensity through physics-inspired modeling and embeds them as priors throughout the detection pipeline. First, a dual-modal closure modeling module explicitly constructs occlusion intensity ground truth for both modalities offline via a Beer-Lambert-inspired formulation and building-mask correction. Second, using these ground-truth maps as supervision, a dual-modal prediction network converts the offline modeling results into online occlusion intensity predictions under single-frame inference. Third, both ground-truth and predicted occlusion intensity are injected into data augmentation, feature encoding, multimodal fusion, and detection head, enabling adaptive detection under spatially varying and modality-dependent information degradation. Experiments on two self-built UAV-based multimodal datasets, SI3D-DI and SI3D-DII, demonstrate that CAMF-Det achieves the best performance across all difficulty levels, with hard-level mAP$_{\mathrm{BEV}}$ improvements of 9.43% and 4.88% over the best competing methods, respectively. These results confirm the effectiveness of explicit occlusion prior modeling and exploitation for robust multimodal 3D detection in UAV scenes.

Multimodal large language models (MLLMs) are predominantly evaluated on free-form vision-language tasks such as visual question answering, captioning, and summarization. However, their practical use is rapidly expanding to more structured computer vision settings, where users prompt models to perform localization-centric tasks such as object detection, often within larger agentic or decision-making systems. Despite this shift, there is currently no standardized benchmark that systematically evaluates these capabilities at scale. In this work, we introduce the first comprehensive benchmark specifically designed to assess the promptable localization abilities of generalist MLLMs. Our benchmark spans four core task categories: object detection, referring expression detection, instance-level detection, and video-based detection. To enable consistent and fair evaluation, we develop a unified framework that standardizes inputs, enforces parsable bounding box outputs, and defines transparent evaluation protocols across tasks. Using this suite, we evaluate a diverse set of open-source and proprietary MLLMs, providing an in-depth analysis of their performance and limitations. Beyond accuracy, we examine models' ability to adhere to output format specifications, showing that current systems are highly sensitive to formatting constraints and often fail to generalize even to minor variations. Our results highlight both the strengths and shortcomings of state-of-the-art MLLMs in localization settings, and point toward important directions for improving multimodal model design and evaluation.

Object detection is an important task in computer vision, which aims to detect the objects of interest. through the given category list or query images. In this work, we propose a new problem of language-visual-complementary open-set object detection (LV-OSD), i.e., using the flexible text-based and/or image-based prompts to specify the desired object categories. This setting is more common and practical in real-world applications. For this purpose, we design a dual-branch detection framework, LVDor, which can simultaneously accept both text and image prompts. Specifically, we first build the Multi-modal Prompts (MPr) containing various text descriptions and image samples for each category. Subsequently, to bridge the semantic gap among the input image, text prompts, and image prompts, we design a Target-guided Prompt Dynamic Weighting (TPDW) module. Guided by the prior information of the target image, this module dynamically produces the text and image prompts that best align with the target semantics, achieving precise alignment and effectively reducing the discrepancy between the two modalities, thereby accommodating the LV-OSD setting. We also propose a simple Prompt Random Masking (PRM) mechanism during training to simulate the arbitrary combination of text and/or image prompts in testing. Extensive experimental results verify our problem formulation's reasonability and our method's effectiveness. Prompts and code will be released publicly.

Multimodal deep neural networks deployed in realistic environments must contend with runtime variations: changes in modality quality, overall input complexity, and available platform resources. Current networks struggle with such fluctuations -- adaptive networks cannot adhere to a strict compute budget, controller-based networks neglect to consider input complexity, and statically provisioned networks fail at all the above. Consequently, they do not extract maximum utility from the expended computational resources. We present SWAN (Sample and World-Aware Multimodal Network), the first adaptive multimodal network that accomplishes all three goals. SWAN employs a quality-aware controller to assign resources among modalities according to a variable user-specified maximum budget. Within this budget, an adaptive gating module further optimizes efficiency by scaling layer utilization according to sample complexity. For further gains, SWAN also employs a token dropping module that masks semantically irrelevant multimodal features before performing detections. We evaluate SWAN in the domain of autonomous driving with complex multi-object 3D detection, reducing FLOPs by up to 49% with minimal degradation.

Reliable UAV object detection requires robustness to illumination changes, motion blur, and scene dynamics that suppress RGB cues. Thermal long-wave infrared (LWIR) sensing preserves contrast in low light, and event cameras retain microsecond-level temporal edges, but integrating all three modalities in a unified detector has not been systematically studied. We present a tri-modal framework that processes RGB, thermal, and event data with a dual-stream hierarchical vision transformer. At selected encoder depths, a Modality-Aware Gated Exchange (MAGE) applies inter-sensor channel and spatial gating, and a Bidirectional Token Exchange (BiTE) module performs bidirectional token-level attention with depthwise-pointwise refinement, producing resolution-preserving fused maps for a standard feature pyramid and two-stage detector. We introduce a 10,489-frame UAV dataset with synchronized and pre-aligned RGB-thermal-event streams and 24,223 annotated vehicles across day and night flights. Through 61 controlled ablations, we evaluate fusion placement, mechanism (baseline MAGE+BiTE, CSSA, GAFF), modality subsets, and backbone capacity. Tri-modal fusion improves over all dual-modal baselines, with fusion depth having a significant effect and a lightweight CSSA variant recovering most of the benefit at minimal cost. This work provides the first systematic benchmark and modular backbone for tri-modal UAV-based object detection.

Beyond the immediate biophysical benefits, urban trees play a foundational role in environmental sustainability and disaster mitigation. Precise mapping of urban trees is essential for environmental monitoring, post-disaster assessment, and strengthening policy. However, the transition from traditional, labor-intensive field surveys to scalable automated systems remains limited by high annotation costs and poor generalization across diverse urban scenarios. This study introduces a multimodal framework that integrates high-resolution satellite imagery with ground-level Google Street View to enable scalable and detailed urban tree detection under limited-annotation conditions. The framework first leverages satellite imagery to localize tree candidates and then retrieves targeted ground-level views for detailed detection, significantly reducing inefficient street-level sampling. To address the annotation bottleneck, domain adaptation is used to transfer knowledge from an existing annotated dataset to a new region of interest. To further minimize human effort, we evaluated three learning strategies: semi-supervised learning, active learning, and a hybrid approach combining both, using a transformer-based detection model. The hybrid strategy achieved the best performance with an F1-score of 0.90, representing a 12% improvement over the baseline model. In contrast, semi-supervised learning exhibited progressive performance degradation due to confirmation bias in pseudo-labeling, while active learning steadily improved results through targeted human intervention to label uncertain or incorrect predictions. Error analysis further showed that active and hybrid strategies reduced both false positives and false negatives. Our findings highlight the importance of a multimodal approach and guided annotation for scalable, annotation-efficient urban tree mapping to strengthen sustainable city planning.

Multi-Modal LLMs (MLLMs) demonstrate strong visual grounding capabilities on popular object detection benchmarks like OdinW-13 and RefCOCO. However, state-of-the-art models still struggle to generalize to out-of-distribution classes, tasks and imaging modalities not typically found in their pre-training. While in-context prompting is a common strategy to improve performance across diverse tasks, we find that it often yields lower detection accuracy than prompting with class names alone. This suggests that current MLLMs cannot yet effectively leverage few-shot visual examples and rich textual descriptions for object detection. Since frontier MLLMs are typically only accessible via APIs, and state-of-the-art open-weights models are prohibitively expensive to fine-tune on consumer-grade hardware, we instead explore black-box prompt optimization for few-shot object detection. To this end, we propose Detection Prompt Optimization (DetPO), a gradient-free test-time optimization approach that refines text-only prompts by maximizing detection accuracy on few-shot visual training examples while calibrating prediction confidence. Our proposed approach yields consistent improvements across generalist MLLMs on Roboflow20-VL and LVIS, outperforming prior black-box approaches by up to 9.7 mAP. Our code and optimized prompts are available at https://ggare-cmu.github.io/DetPO/

Multi-modal fusion has emerged as a promising paradigm for accurate 3D object detection. However, performance degrades substantially when deployed in target domains different from training. In this work, focusing on dual-branch proposal-level detectors, we identify two factors that limit robust cross-domain generalization: 1) in challenging domains such as rain or nighttime, one modality may undergo severe degradation; 2) the LiDAR branch often dominates the detection process, leading to systematic underutilization of visual cues and vulnerability when point clouds are compromised. To address these challenges, we propose three components. First, Query-Decoupled Loss provides independent supervision for 2D-only, 3D-only, and fused queries, rebalancing gradient flow across modalities. Second, LiDAR-Guided Depth Prior augments 2D queries with instance-aware geometric priors through probabilistic fusion of image-predicted and LiDAR-derived depth distributions, improving their spatial initialization. Third, Complementary Cross-Modal Masking applies complementary spatial masks to the image and point cloud, encouraging queries from both modalities to compete within the fused decoder and thereby promoting adaptive fusion. Extensive experiments demonstrate substantial gains over state-of-the-art baselines while preserving source-domain performance. Code and models are publicly available at https://github.com/IMPL-Lab/CCF.

The dynamic and heterogeneous nature of agricultural fields presents significant challenges for object detection and localization, particularly for autonomous mobile robots that are tasked with surveying previously unseen unstructured environments. Concurrently, there is a growing need for real-time detection systems that do not depend on large-scale manually labeled real-world datasets. In this work, we introduce a comprehensive annotation-to-detection framework designed to train a robust multi-modal detector using limited and partially labeled training data. The proposed methodology incorporates cross-modal annotation transfer and an early-stage sensor fusion pipeline, which, in conjunction with a multi-stage detection architecture, effectively trains and enhances the system's multi-modal detection capabilities. The effectiveness of the framework was demonstrated through vine trunk detection in novel vineyard settings that featured diverse lighting conditions and varying crop densities to validate performance. When integrated with a customized multi-modal LiDAR and Odometry Mapping (LOAM) algorithm and a tree association module, the system demonstrated high-performance trunk localization, successfully identifying over 70% of trees in a single traversal with a mean distance error of less than 0.37m. The results reveal that by leveraging multi-modal, incremental-stage annotation and training, the proposed framework achieves robust detection performance regardless of limited starting annotations, showcasing its potential for real-world and near-ground agricultural applications.

Recent advances in vision-language modeling have produced promptable detection and segmentation systems that accept arbitrary natural language queries at inference time. Among these, SAM3 achieves state-of-the-art accuracy by combining a ViT-H/14 backbone with cross-modal transformer decoding and learned object queries. However, SAM3 processes a single text prompt per forward pass. Detecting N categories requires N independent executions, each dominated by the 439M-parameter backbone. We present Detect Anything in Real Time (DART), a training-free framework that converts SAM3 into a real-time multi-class detector by exploiting a structural invariant: the visual backbone is class-agnostic, producing image features independent of the text prompt. This allows the backbone computation to be shared between all classes, reducing its cost from O(N) to O(1). Combined with batched multi-class decoding, detection-only inference, and TensorRT FP16 deployment, these optimizations yield 5.6x cumulative speedup at 3 classes, scaling to 25x at 80 classes, without modifying any model weight. On COCO val2017 (5,000 images, 80 classes), DART achieves 55.8 AP at 15.8 FPS (4 classes, 1008x1008) on a single RTX 4080, surpassing purpose-built open-vocabulary detectors trained on millions of box annotations. For extreme latency targets, adapter distillation with a frozen encoder-decoder achieves 38.7 AP with a 13.9 ms backbone. Code and models are available at https://github.com/mkturkcan/DART.

Multi-modal 3D object detection with bird's eye view (BEV) has achieved desired advances on benchmarks. Nonetheless, the accuracy may drop significantly in the real world due to data corruption such as sensor configurations for LiDAR and scene conditions for camera. One design bottleneck of previous models resides in the tightly coupling of multi-modal BEV features during fusion, which may degrade the overall system performance if one modality or both is corrupted. To mitigate, we propose a Multi-Modal Decouple and Recouple Network for robust 3D object detection under data corruption. Different modalities commonly share some high-level invariant features. We observe that these invariant features across modalities do not always fail simultaneously, because different types of data corruption affect each modality in distinct ways.These invariant features can be recovered across modalities for robust fusion under data corruption.To this end, we explicitly decouple Camera/LiDAR BEV features into modality-invariant and modality-specific parts. It allows invariant features to compensate each other while mitigates the negative impact of a corrupted modality on the other.We then recouple these features into three experts to handle different types of data corruption, respectively, i.e., LiDAR, camera, and both.For each expert, we use modality-invariant features as robust information, while modality-specific features serve as a complement.Finally, we adaptively fuse the three experts to exact robust features for 3D object detection. For validation, we collect a benchmark with a large quantity of data corruption for LiDAR, camera, and both based on nuScenes. Our model is trained on clean nuScenes and tested on all types of data corruption. Our model consistently achieves the best accuracy on both corrupted and clean data compared to recent models.

Despite the growing interest in open-vocabulary object detection in recent years, most existing methods rely heavily on manually curated fine-grained training datasets as well as resource-intensive layer-wise cross-modal feature extraction. In this paper, we propose HDINO, a concise yet efficient open-vocabulary object detector that eliminates the dependence on these components. Specifically, we propose a two-stage training strategy built upon the transformer-based DINO model. In the first stage, noisy samples are treated as additional positive object instances to construct a One-to-Many Semantic Alignment Mechanism(O2M) between the visual and textual modalities, thereby facilitating semantic alignment. A Difficulty Weighted Classification Loss (DWCL) is also designed based on initial detection difficulty to mine hard examples and further improve model performance. In the second stage, a lightweight feature fusion module is applied to the aligned representations to enhance sensitivity to linguistic semantics. Under the Swin Transformer-T setting, HDINO-T achieves 49.2 mAP on COCO using 2.2M training images from two publicly available detection datasets, without any manual data curation and the use of grounding data, surpassing Grounding DINO-T and T-Rex2 by 0.8 mAP and 2.8 mAP, respectively, which are trained on 5.4M and 6.5M images. After fine-tuning on COCO, HDINO-T and HDINO-L further achieve 56.4 mAP and 59.2 mAP, highlighting the effectiveness and scalability of our approach. Code and models are available at https://github.com/HaoZ416/HDINO.