Sim-To-Real Gap

Learning real-world dynamics from visual observations is crucial for various domains. A common strategy is to calibrate simulators by estimating physical parameters, yet accuracy is ultimately bounded by the underlying physical models, which often assume materials are homogeneous and isotropic. Even if reasonable, real-world objects typically exhibit mild anisotropy and heterogeneity. After the near-isotropic backbone is well calibrated, these residual effects become the key bottleneck for further closing the real-to-sim gap. Although neural networks can fit dynamics end-to-end, such black-box modeling discards strong physical priors, leading to poor data efficiency and overfitting. Therefore, we propose MoSA, a motion-constrained stress adaptation framework that targets these residual effects to further improve real-to-sim dynamics learning. MoSA uses an isotropic model as a physics prior and learns residual stress operators to capture mild anisotropy and heterogeneity. It progressively adapts stresses via microplane-constrained redistribution in a physics-informed cascaded network. We further impose motion constraints by supervising temporal and spatial derivatives of the deformation field. Experimentally, our learned dynamics achieves superior accuracy, generalization, and robustness, while learning physically meaningful residual anisotropy. Finally, we validate MoSA in a robot manipulation setting, showing that better real-to-sim dynamics modeling translates into more reliable sim-to-real transfer. Project Page is available at https://mercerai.github.io/MoSA/.

Suppose a planner has a pre-trained simulator of a sequential decision problem and the option to run real experiments in the field. The simulator is cheap to query but inherits confounding and drift from its calibration data. Experimentation is unbiased but consumes one real unit per trial. We study when, and how, the planner should supplement the simulator with experiments. We give three results. First, an extended simulation lemma decomposes the simulator's value error into a calibration--deployment shift that randomization can identify and a parametric residual that no further interaction can reduce. Second, the value gap between the simulator-optimal policy and the optimum splits into a local component, on states the deployed policy already visits, and a reachability component, on states it does not. The reachability component stays bounded away from zero at any horizon under purely passive learning. Third, we propose Fisher-SEP, a simulation-aided experimental policy (SEP) that minimizes the posterior predictive variance of a target policy's value, with reward-only and transition-only specializations. Two case studies illustrate the regimes. In a vending-machine supply chain, front-loaded experimentation overtakes posterior updating once the horizon is long enough to amortize the pilot. In an HIV mobile-testing example with a corridor that separates a well-surveilled region from a poorly-surveilled one, only designed exploration reaches the poorly-surveilled region.

Wireless extended reality (XR) teleoperation provides embodied interaction capability for collecting humanoid robot demonstrations, but the large-scale adoption is restricted by the overhead of high-frequency motion transmission. This paper develops a system framework that integrates sampling, transmission, interpolation, and reconstruction and formulates a communication-rate optimization that aims to minimize the communication energy while maintaining the reconstruction accuracy of robot motion trajectories through dimension-wise sampling-rate control. Since acquiring real-time feedback from physical robots is limited by hardware costs, it is necessary to solve the problem through simulator interaction with offline real-domain data correction. To guide sim-to-real adaptation, we provide a PAC-Bayes generalization characterization that reveals the effects of latent density-ratio estimation, finite-sample deviation, and encoder bias. Building on this analysis, we propose a proximal policy optimization (PPO) method with density-ratio weighting and trust-region regularization. Experiments on public humanoid teleoperation dataset show that the proposed method improves the tradeoff between reconstruction error and communication energy consumption under sim-to-real distribution shift. We further analyze the effectiveness of the proposed algorithm across various wireless channels and dynamic motion trajectories.

Recent years have witnessed significant progress in autonomous navigation using reinforcement learning. However, existing approaches largely emphasize reinforcement learning framework design, such as input representations, action spaces, and reward functions, while providing limited analysis of sim-to-real transfer and insufficient insight into how training strategies affect real-world deployment performance. To bridge this gap, we not only introduce an effective RL framework but also present a complete training and deployment pipeline, along with a systematic empirical study that disentangles the key factors affecting sim-to-real transfer in reinforcement learning-based navigation, including sensor noise, perception failures, system latency, and control response. Building on insights from this analysis, we introduce perturbation-aware fine-tuning, a post-training adaptation strategy that improves transfer robustness by explicitly accounting for empirically identified domain discrepancies. To further mitigate perception degradation and enhance control smoothness in real-world deployment, we propose a Transformer-based temporal reasoning policy that leverages short-horizon observation for navigation control. We quantitatively evaluate how individual sim-to-real perturbations and training design choices impact navigation performance across environments. Experimental results demonstrate that the proposed training strategy and policy architecture outperform learning-based baselines in both static and dynamic environments, while achieving performance comparable to optimization-based planners in static settings. We validate our approach through real-world deployment on multiple robotic platforms, including aerial and legged robots, across navigation-centric tasks such as exploration and inspection, demonstrating zero-shot sim-to-real transfer.

Recovering 4D human-object interaction (HOI) from monocular video is a key step toward scalable 3D content creation, embodied AI, and simulation-based learning. Recent methods can reconstruct temporally coherent human and object trajectories, but these trajectories often remain visual artifacts while failing to preserve stable contact, functional manipulation, or physical plausibility when used as reference motions for humanoid-object simulation. This reveals a fundamental interaction gap: HOI reconstruction should not stop at tracking a human and an object, but should recover the relation that makes their motion a coherent interaction. We introduce $\textbf{HA-HOI}$, a framework for reconstructing physically plausible 4D HOI animation from in-the-wild monocular videos. Instead of treating the human and object as independent entities in an ambiguous monocular 3D space, we propose a $\textit{human-first, object-follow}$ formulation. The human motion is recovered as the interaction anchor, and the object is reconstructed, aligned, and refined relative to the human action. The resulting kinematic trajectory is then projected into a physics-based humanoid-object simulation, where it acts as a teacher trajectory for stable physical rollout. Across benchmark and in-the-wild videos, $\textbf{HA-HOI}$ improves human-object alignment, contact consistency, temporal stability, and simulation readiness over prior monocular HOI reconstruction methods. By moving beyond visually plausible trajectory recovery toward physically grounded interaction animation, our work takes a step toward turning general monocular HOI videos into scalable demonstrations for humanoid-object behavior. Project page: https://knoxzhao.github.io/real2sim_in_HOI/

Reliable autonomous driving relies on large-scale, well-labeled data and robust models. However, manual data collection is resource-intensive, and traditional simulation suffers from a persistent reality gap. While recent generative frameworks and radiance-field methods improve visual fidelity, they still struggle with temporal and spatial consistency and cannot ensure physics-aware behavior, limiting their applicability to driving scenario generation. To address these challenges, we propose Real2Sim, an unified framework that combines 4D Gaussian Splatting (4DGS) with a differentiable Material Point Method (MPM) solver. Real2Sim explicitly reconstructs dynamic driving scenes as temporally continuous Gaussian primitives, supports instance-level editing, and simulates realistic object-object and object-environment interactions. This framework enables physics-aware, high-fidelity synthesis of diverse, editable scenarios, including challenging corner cases such as collisions and post-impact trajectories. Experiments on the Waymo Open Dataset validate Real2Sim's capabilities in rendering, reconstruction, editing, and physics simulation, demonstrating its potential as a scalable tool for data generation in downstream tasks such as perception, tracking, trajectory prediction, and end-to-end policy learning.

Stable, low-latency whole-body teleoperation of humanoid robots is an open research challenge, complicated by kinematic mismatches between human and robot morphologies, accumulated inertial sensor noise, non-trivial control latency, and persistent sim-to-real transfer gaps. This paper presents a complete real-time whole-body teleoperation system that maps human motion, recorded with a Virdyn IMU-based full-body motion capture suit, directly onto a Unitree G1 humanoid robot. We introduce a custom motion-processing, kinematic retargeting, and control pipeline engineered for continuous, low-latency operation without any offline buffering or learning-based components. The system is first validated in simulation using the MuJoCo physics model of the Unitree G1 (sim2sim), and then deployed without modification on the physical platform (sim2real). Experimental results demonstrate stable, synchronized reproduction of a broad motion repertoire, including walking, standing, sitting, turning, bowing, and coordinated expressive full-body gestures. This work establishes a practical, scalable framework for whole-body humanoid teleoperation using commodity wearable motion capture hardware.

Tool-use language agents are evaluated on benchmarks that assume clean inputs, unambiguous tool registries, and reliable APIs. Real deployments violate all these assumptions: user typos propagate into hallucinated tool names, a misconfigured request timeout can stall an agent indefinitely, and duplicate tool names across servers can freeze an SDK. We study these failures as a sim-to-real gap in the tool-use partially observable Markov decision process (POMDP), where deployment noise enters through the observation, action space, reward-relevant metadata, or transition dynamics. We introduce RobustBench-TC, a benchmark with 22 perturbation types organized by these four POMDP components, each grounded in a verified GitHub issue or documented tool-calling failure. Across 21 models from 1.5B to 32B parameters (including the closed-source o4-mini), the robustness profile is sharply uneven: observation perturbations reduce accuracy by less than 5%, while reward-relevant and transition perturbations reduce accuracy by roughly 40% and 30%, respectively; scale alone does not close these gaps. We then propose ToolRL-DR, a domain-randomization reinforcement learning (RL) recipe that trains a tool-use agent on perturbation-augmented trajectories spanning the three statically encodable POMDP components. On a 3B backbone, ToolRL-DR-Full retains roughly three-quarters of clean accuracy and reaches an aggregate perturbed accuracy comparable to open-source 14B function-calling baselines while substantially narrowing the gap to o4-mini. It closes approximately 27% of the Transition gap despite never seeing transition perturbations in training, suggesting that RL on adversarial static tool-use inputs induces a more persistent retry policy that transfers to unseen runtime failures. The dataset, code and benchmark leaderboard are publicly available.

In recent years, autonomous parking has made significant advances, yet parking tasks still face challenges in extreme scenarios such as mechanical and dead-end parking slots, often resulting in failures. This is mainly due to traditional parking methods adopting a multistage approach, lacking the ability to optimize the parking problem as a whole. End-to-end methods enable joint optimization across perception and planning modules to eliminate the accumulation of errors, enhancing algorithm performance in extreme scenarios. Although several end-to-end parking methods use imitation or reinforcement learning, the former is limited by data cost and distribution coverage, while the latter suffers from inefficient exploration. To address these challenges, we propose a Reinforcement learning End-to-end Autonomous Parking method (REAP). REAP employs Soft Actor-Critic (SAC) within an asymmetric reinforcement learning framework to improve training efficiency and inference performance. To accelerate model convergence, we distill the capabilities of a rule-based planner into the end-to-end network through behavior cloning. We further introduce a soft predictive collision penalty mechanism to reduce collision rates by penalizing obstacle-approaching actions. To ensure that the trained reinforcement learning network can directly transfer to real-world scenarios, we have established a Real2Sim2Real simulator. In the Real2Sim step, we use 3D Gaussian Splatting (3DGS) to transform real-world scenes into digital scenes. In the Sim2Real step, we deploy the end-to-end model onto the vehicle to bridge the Sim2Real gap. Trained in the 3DGS simulator and deployed on physical vehicles, REAP successfully parks in various types of parking spaces, especially demonstrating the feasibility of end-to-end RL parking in extremely narrow mechanical slots.

Simulation-based inference (SBI) provides amortized Bayesian parameter inference from simulator-generated data without requiring explicit likelihood evaluation. Its reliability can degrade under model misspecification, where real-world observations are not well represented by the simulator used for training. Existing methods using unlabeled real-world data often align simulated and real-world data distributions, but marginal alignment alone does not directly preserve parameter-relevant information needed for posterior inference. We propose SPIN, an SBI framework with parameter-relevant information-preserving domain transfer using unlabeled, unpaired real-world observations. During training, SPIN translates labeled simulator observations toward the real-world domain and back to the simulator domain, using the original simulator labels to encourage domain transfer that preserves parameter-relevant mutual information. At test time, the learned real-to-simulator transport maps real-world observations into the simulator domain for posterior inference, without requiring real-world parameter labels or paired real--simulator observations. Across controlled synthetic and physical real-world benchmarks, SPIN improves real-world posterior inference, with the improvement becoming clearer as misspecification increases.

Autonomous surface vessels for floating-waste removal operate under varying hydrodynamics, external disturbances, and challenging water-surface perception. We present a field-validated system that combines camera-based polarimetric perception with a lightweight DRL-based controller for floating-waste detection and capture. Camera detections are converted into water-surface target points and tracked by a controller trained entirely in simulation and deployed directly on a retrofitted ASV platform. Our main contribution is a sim-to-real testing methodology that combines a two-stage simulation protocol with a perception abstraction module designed to mimic real camera behavior, enabling reproducible field trials and explicit evaluation of the sim-to-real gap. We apply this framework in matched simulation and field experiments across 14 disturbance regimes to expose failure modes and evaluate robustness. The results show centimeter-level terminal accuracy and indicate robust control performance under the evaluated perturbation regimes. The main source of degradation is insufficient actuation-model fidelity. We also demonstrate the system in a search-and-capture application using real camera detections in real-world conditions over areas of up to $450~m^2$. The study distills practical lessons for reliable transfer, including improved actuation-model fidelity, targeted domain randomization, and careful management of latency and timestamps across modules, while highlighting remaining challenges.

Video game engines have been an important source for generating large volumes of visual synthetic datasets for training and evaluating computer vision algorithms that are to be deployed in the real world. While the visual fidelity of modern game engines has been significantly improved with technologies such as ray-tracing, a notable sim2real appearance gap between the synthetic and the real-world images still remains, which limits the utilization of synthetic datasets in real-world applications. In this letter, we investigate the ability of a state-of-the-art image generation and editing diffusion model (FLUX.2-4B Klein) to enhance the photorealism of synthetic datasets and compare its performance against a traditional image-to-image translation model (REGEN). Furthermore, we propose a hybrid approach that combines the strong geometry and material transformations of diffusion-based methods with the distribution-matching capabilities of image-to-image translation techniques. Through experiments, it is demonstrated that REGEN outperforms FLUX.2-4B Klein and that by combining both FLUX.2-4B Klein and REGEN models, better visual realism can be achieved compared to using each model individually, while maintaining semantic consistency. The code is available at: https://github.com/stefanos50/Hybrid-Sim2Real

Sim-to-real transfer remains a critical bottleneck for deploying dexterous manipulation policies learned in simulation to real-world robots. Existing approaches rely on manually designed domain randomization or task-specific adaptation, limiting their generalizability across diverse manipulation scenarios. We present DexSim2Real, an integrated framework that leverages vision-language foundation models to bridge the sim-to-real gap for dexterous manipulation. Our system combines three components: (1) Foundation Model-Guided Domain Randomization (FM-DR), which uses a vision-language model as a visual realism critic to optimize simulation parameters via closed-loop CMA-ES, complementing text-based approaches like DrEureka with direct visual feedback; (2) a Tactile-Visual Cross-Attention Policy (TVCAP) that adapts cross-attention visuo-tactile fusion to zero-shot sim-to-real RL; and (3) a Progressive Skill Curriculum (PSC) that builds on LLM-based task decomposition with a difficulty scheduler tailored to contact-rich dexterous tasks. Extensive experiments on six challenging manipulation tasks with blinded evaluation demonstrate that DexSim2Real achieves a 78.2% average real-world success rate, outperforming DrEureka and DeXtreme while reducing the sim-to-real performance gap to only 8.3%.

Simulating optical tactile sensors presents significant challenges due to their high deformability and intricate optical properties. To address these issues and enable a physically accurate simulation, we propose DOT-Sim: Differentiable Optical Tactile Simulation. Unlike prior simulators that rely on simplified models of deformable sensors, DOT-Sim accurately captures the physical behavior of soft sensors by modeling them as elastic materials using the Material Point Method (MPM). DOT-Sim enables rapid calibration of optical tactile sensor simulation using a small number of demonstrations within minutes, which is substantially faster than existing methods. Compared to current baselines, our approach supports much larger and non-linear deformations. To handle the optical aspect, we propose a novel approach to simulating optical responses by learning a residual image relative to the real-world idle state. We validate the physical and visual realism of our method through a series of zero-shot sim-to-real tasks. Our experiments show that DOT-Sim (1) accurately replicates the physical dynamics of a DenseTact optical tactile sensor in reality, (2) generates realistic optical outputs in contact-rich scenarios, (3) enables direct deployment of simulation-trained classifiers in the real world, achieving 85% classification accuracy on challenging objects and 90% accuracy in embedded tumor-type detection, and (4) allows precise trajectory following with a policy trained from demonstrations in simulation, with an average error of less than 0.9 mm.

We introduce asRoBallet, to the best of our knowledge, the first end-to-end reinforcement learning (RL) locomotion policy deployed on a humanoid ballbot hardware platform. Historically, ballbots have served as a canonical benchmark for underactuated and nonholonomic control, which are characterized by a reality gap in complex friction models for wheel-ball-floor interactions. While current literature demonstrates successful handling of 3D balancing with LQR and MPC, transitioning to actual hardware for a humanoid ballbot using RL is currently hindered by critical gaps in contact modeling, actuator latency & jitter, and safe hardware exploration. This study proposes a high-fidelity MuJoCo simulation that explicitly models the discrete roller mechanics of ETH-type omni-wheels, thereby capturing parasitic vibrations and contact discontinuities that have previously been ignored. We also developed a Friction-Aware Reinforcement Learning framework that achieves zero-shot Sim2Real transfer by mastering the coupled rolling, lateral, and torsional friction channels at the wheel-ball and ball-floor interfaces. We designed asRoBallet through subtractive reconfiguration, repurposing key components from an overconstrained quadruped and integrating them into a newly designed structural frame to achieve a robust research platform at low cost. We also developed a generalized iOS ecosystem that transforms consumer electronics into a low-latency interface, enabling a single operator to orchestrate expressive humanoid maneuvers via intuitive natural motion.

This paper studies the problem of robot performance evaluation, focusing on how to obtain accurate and efficient estimates of real-world behavior under severe constraints on physical experimentation. Such estimates are essential for benchmarking algorithms, comparing design alternatives, validating controllers, and supporting certification or regulatory decision-making, yet real-world testing with physical robots is often expensive, time-consuming, and safety-limited. To mitigate the scarcity of real-world trials, sim-to-real methodologies are commonly employed, using low-cost simulators to inform, supplement, or prioritize physical experiments. Departing from (and complementary to) existing approaches in variance reduction (e.g., importance-sampling variants) or bias-correction (e.g., through prediction-powered inference or learned control variates), we examine this performance-evaluation problem through the lens of betting. We establish theoretical conditions under which a betting mechanism can yield accurate and efficient estimates (provably outperforming the Monte Carlo estimator) and we characterize how such bets should be constructed. We further develop theoretically grounded yet practically implementable approximations of the ideal bet, and we provide concrete decision rules that diagnose when these approximate betting strategies are working as intended. We demonstrate the effectiveness of the proposed methods using both synthetic examples and cross-fidelity computational simulators. Notably, we also showcase an illustrative case in which a group of synthetic distributions are used to infer the real-world pick-and-place accuracy of a robotic manipulator, a seemingly unconventional sim-to-real transfer that becomes natural and feasible under the proposed betting perspective. Programs for reproducing empirical results are available at https://github.com/ISUSAIL/Bet4Sim2Real.

Training multimodal agents via reinforcement learning for knowledge-intensive visual reasoning is fundamentally hindered by the extreme sparsity of outcome-based supervision and the unpredictability of live web environments. To resolve these algorithmic and environmental bottlenecks, we introduce ProMMSearchAgent, establishing a novel Sim-to-Real training paradigm for multimodal search. We decouple policy learning into a deterministic, local static sandbox. Crucially, to learn effectively within this constrained environment, we propose an introspective process-oriented reward. By probing the agent's own parametric knowledge boundaries, we generate dense behavioral metadata that explicitly rewards the correct cognitive decision, initiating a multimodal or text search only when visually or factually uncertain. Extensive experiments demonstrate that our locally-trained policy transfers zero-shot to the live Google Search API. ProMMSearchAgent achieves new SOTA performance, outperforming MMSearch-R1 by +5.1% on FVQA-test, +6.3% on InfoSeek, and +11.3% on MMSearch.

In recent years, reinforcement learning (RL) has shown remarkable success in robotics when a fast and accurate simulator is available for a given task. When using RL and simulation, more simulator realism is generally beneficial but becomes harder to obtain as robots are deployed in increasingly complex and widescale domains. In such settings, simulators will likely fail to model all relevant details of a given target task and this observation motivates the study of sim2real with simulators that leave out key task details. In this paper, we formalize and study the abstract sim2real problem: given an abstract simulator that models a target task at a coarse level of abstraction, how can we train a policy with RL in the abstract simulator and successfully transfer it to the real-world? Our first contribution is to formalize this problem using the language of state abstraction from the RL literature. This framing shows that an abstract simulator can be grounded to match the target task if the grounded abstract dynamics take the history of states into account. Based on the formalism, we then introduce a method that uses real-world task data to correct the dynamics of the abstract simulator. We then show that this method enables successful policy transfer both in sim2sim and sim2real evaluation.

This paper presents a sim-to-real approach that enables legged robots to dynamically manipulate large and heavy objects with whole-body dexterity. Our key insight is that by performing test-time steering of a pre-trained whole-body control policy with a sample-based planner, we can enable these robots to solve a variety of dynamic loco-manipulation tasks. Interestingly, we find our method generalizes to a diverse set of objects and tasks with no additional tuning or training, and can be further enhanced by flexibly adjusting the cost function at test time. We demonstrate the capabilities of our approach through a variety of challenging loco-manipulation tasks on a Spot quadruped robot in the real world, including uprighting a tire heavier than the robot's nominal lifting capacity and dragging a crowd-control barrier larger and taller than the robot itself. Additionally, we show that the same approach can be generalized to humanoid loco-manipulation tasks, such as opening a door and pushing a table, in simulation. Project code and videos are available at https://sumo.rai-inst.com/.

Vision-language-model (VLM)-guided reinforcement learning (RL) has recently attracted significant attention for it, replacing brittle hand-crafted rewards with semantically grounded signals; however, deploying such simulation-trained policies on real vehicles remains a fundamental challenge, because they rely on simulator-native observations and simulator-coupled action semantics with no counterpart on physical hardware. We identify a general principle: the simulation-to-reality gap decomposes into two largely orthogonal axes, a sensing-and-dynamics domain gap and a task-and-geometry gap, the former closable without real-world policy training by re-projecting real perception and control onto the policy's training manifold. We formalize this as a transfer guarantee that bounds the deployment gap by three independently controllable error terms, and instantiate it as Sim2Real-AD, which combines a Geometric Observation Bridge, a Physics-Aware Action Mapping, a Two-Phase Progressive Training curriculum, and a Real-time Deployment Pipeline. As a proof of concept, a CARLA-trained VLM-guided RL policy is transferred zero-shot to a full-scale battery-electric Ford E-Transit van in Madison, WI, USA, and drives across car-following, obstacle-avoidance, and stop-sign scenarios using no real-world training data. To our knowledge, this is among the first zero-shot closed-loop deployments of a CARLA-trained VLM-guided RL policy on a full-scale real vehicle, and the decomposition offers a principled, broadly applicable route for moving simulation-trained, foundation-model-guided policies into the physical world, supporting energy-efficient intelligent driving on electrified transportation platforms. The demo video, code, and model checkpoint are available at: https://zilin-huang.github.io/Sim2Real-AD-website/.

Learning a generalist control policy for robotic manipulation typically relies on large-scale datasets. Given the high cost of real-world data collection, a practical alternative is to generate synthetic data through simulation. However, the resulting synthetic data often exhibits a significant gap from real-world distributions. While many prior studies have proposed algorithms to bridge the Sim-to-Real discrepancy, there remains a lack of principled research that grounds these methods in real-world manipulation tasks, particularly their performance on generalist policies such as Vision-Language-Action (VLA) models. In this study, we empirically examine the primary determinants of Sim-to-Real generalization across four dimensions: multi-level domain randomization, photorealistic rendering, physics-realistic modeling, and reinforcement learning updates. To support this study, we design a comprehensive evaluation protocol to quantify the real-world performance of manipulation tasks. The protocol accounts for key variations in background, lighting, distractors, object types, and spatial features. Through experiments involving over 10k real-world trials, we derive critical insights into Sim-to-Real transfer. To inform and advance future studies, we release both the robotic platforms and the evaluation protocol for public access to facilitate independent verification, thereby establishing a realistic and standardized benchmark for robotic manipulation policies.

Autonomous bicycles offer a promising agile solution for urban mobility and last-mile logistics. However, conventional control strategies often struggle with underactuated nonlinear dynamics, suffering from sensitivity to model mismatches and limited adaptability to real-world uncertainties. To address this, we develop CycleRL, a comprehensive sim-to-real framework for robust autonomous bicycle control. Our approach establishes a direct perception-to-action mapping within the high-fidelity NVIDIA Isaac Sim environment, leveraging Proximal Policy Optimization (PPO) to optimize the control policy. The framework features a composite reward function tailored for concurrent balance maintenance, velocity tracking, and steering control. Crucially, systematic domain randomization is employed to reduce the reliance on precise system modeling, bridge the simulation-to-reality gap and facilitate direct transfer. In simulation, CycleRL achieves promising performance, including a 99.90% balance success rate, a heading tracking error of 1.15°, and a velocity tracking error of 0.18 m/s. These quantitative results, coupled with successful hardware deployment, validate DRL as an effective paradigm for autonomous bicycle control, offering superior adaptability over traditional methods. Video demonstrations are available at https://cpnt-lab.github.io/CycleRL/.

Visual navigation models often struggle in real-world dynamic environments due to limited robustness to the sim-to-real gap and the difficulty of training policies tailored to target deployment environments (e.g., households, restaurants, and factories). Although real-to-sim navigation simulation using 3D Gaussian Splatting (GS) can mitigate these challenges, prior GS-based works have considered only static scenes or non-photorealistic human obstacles built from simulator assets, despite the importance of safe navigation in dynamic environments. To address these issues, we propose ReaDy-Go, a novel real-to-sim simulation pipeline that synthesizes photorealistic dynamic scenarios in target environments by augmenting a reconstructed static GS scene with dynamic human GS obstacles, and trains navigation policies using the generated datasets. The pipeline provides three key contributions: (1) a dynamic GS simulator that integrates static scene GS with a human animation module, enabling the insertion of animatable human GS avatars and the synthesis of plausible human motions from 2D trajectories, (2) a navigation dataset generation framework that leverages the simulator along with a robot expert planner designed for dynamic GS representations and a human planner, and (3) robust navigation policies to both the sim-to-real gap and moving obstacles. The proposed simulator generates thousands of photorealistic navigation scenarios with animatable human GS avatars from arbitrary viewpoints. ReaDy-Go outperforms baselines across target environments in both simulation and real-world experiments, demonstrating improved navigation performance even after sim-to-real transfer and in the presence of moving obstacles. Moreover, zero-shot sim-to-real deployment in an unseen environment indicates its generalization potential. Project page: https://syeon-yoo.github.io/ready-go-site/.

Likelihood-free inference (LFI) enables system identification in complex tasks via black-box modelling, abstracting nonlinearity and stochasticity, and infers a domain distribution for adapting agents to parametric deployment conditions. LFI assumes an arbitrary support for sampling, which remains fixed as the initial generic prior is refined to increasingly descriptive posteriors. Misspecified support can therefore yield suboptimal yet overconfident posteriors. We address this issue by using the posterior of an inference step to guide the adaptation of the support using three illustrative heuristics: EDGE, MODE, and CENTRE. Each heuristic interprets the updated belief and enables support adaptation alongside posterior inference. For illustrative purposes, we first study misspecified support in LFI and evaluate the utility of our heuristics using stochastic dynamical benchmarks. We then evaluate posterior-driven heuristic support adaptation for parameter inference and policy learning in a dynamic deformable linear object (DLO) manipulation task. Inference results in a finer length and stiffness classification for a parametric set of DLOs. When the resulting posteriors are used as domain distributions for sim-based policy learning, they lead to more robust object-centric agent performance.

Evaluating Artificial Intelligence (AI) tutor feedback before deployment requires anticipating student engagement, typically assessed through real interaction data. We introduce ParaStudent, a fine-tuning framework for simulating novice programming revisions to support AI tutor evaluation. Compared with prompted baselines, ParaStudent's revisions more closely match real student code distributions across functional, stylistic, and semantic metrics. Our best variant achieves AUCs of 0.80 for both feedback relevance and successful uptake when distinguishing streams with real engagement above versus at or below the median, while prompted baselines remain near chance on successful uptake. These findings demonstrate the promise of simulated engagement for pre-deployment feedback triage.

The sim-to-real gap, which represents the disparity between training and testing environments, poses a significant challenge in reinforcement learning (RL). A promising approach to addressing this challenge is distributionally robust RL, often framed as a robust Markov decision process (RMDP). In this framework, the objective is to find a robust policy that achieves good performance under the worst-case scenario among all environments within a pre-specified uncertainty set centered around the training environment. Unlike previous work, which relies on a generative model or a pre-collected offline dataset enjoying good coverage of the deployment environment, we tackle robust RL via interactive data collection, where the learner interacts with the training environment only and refines the policy through trial and error. In this robust RL paradigm, two main challenges emerge: managing distributional robustness while striking a balance between exploration and exploitation during data collection. Initially, we establish that sample-efficient learning without additional assumptions is unattainable owing to the curse of support shift; i.e., the potential disjointedness of the distributional supports between the training and testing environments. To circumvent such a hardness result, we introduce the vanishing minimal value assumption to RMDPs with a total-variation (TV) distance robust set, postulating that the minimal value of the optimal robust value function is zero. We prove that such an assumption effectively eliminates support shift pathologies for RMDPs with a TV distance robust set, and present an algorithm with near-optimal sample complexity. To demonstrate the breadth of our framework, we extend our algorithm and theory to new robust set formulations and robust Markov games. To illustrate the operational relevance, we apply our algorithm to data-driven robust inventory control.