Synthetic Data Generation
Momentum
43 papers in the last four weeks, up 59% on the four weeks before. 0.4% of all new papers.
Latest papers 417
Scaling supervision for multi-turn medical agents is difficult because expert dialogue annotation is costly and clinical conversations are privacy-restricted. We introduce Guideline-as-Oracle (GAO), which compiles American Academy of Ophthalmology guidance into a 70-row operational rule table and uses it as the sole source of instance-level supervision for 3,000 training dialogues, reserving human labeling for evaluation. Because converting rules into dialogues is itself a design problem, we catalog eight construction strategies, including cited-row tier assignment, one-fact boundary pairs, metadata-only repair, and label repair, and characterize the evidential status of each: labeling mechanism, null, confounded, or evaluated only as a package. Fine-tuning a 9B backbone on this corpus yields GAO-Triage, improving agreement with a 201-case operational reference from 61.7% to 74.1% (exact McNemar p=0.0046) and emergent-case recall from 9.5% to 69.0%; the gains persist across a second seed and patient simulator. None of the seven general-purpose systems we test dominates GAO-Triage on both metrics, and GAO-Triage requires no frontier model at inference time. Permuting label-dialogue assignments collapses the model to a constant-routine predictor, indicating that the signal lies in guideline-derived assignment rather than dialogue surface form. Label repair coincides with the disappearance of a late-training safety degradation.
Operationally Feasible Synthetic Power-Grid Scenarios via Learning the AC-Operable Joint Distribution
Synthetic power-grid scenarios are essential for planning, resilience assessment, contingency analysis, and data-driven power-system applications. Recent synthetic grid generation methods have improved structural realism and operational feasibility by incorporating engineering knowledge through post-generation validation, optimization, or physics-aware generation. However, generated scenarios may still exhibit low AC feasibility and robustness, limiting their practical value for downstream power-system studies. This paper proposes a feasibility-aware distribution-learning framework that learns the AC-operable joint distribution of network topology, branch electrical parameters, and time-varying load profiles. Instead of enforcing feasibility after generation, the proposed framework incorporates AC power-flow convergence and operational constraints into hierarchical diffusion-based distribution learning. This enables the generator itself to produce operationally feasible grid scenarios through efficient diffusion sampling. The hierarchical architecture decomposes the high-dimensional generation task into three engineering-motivated stages: topology and bus-attribute generation, branch-parameter generation conditioned on the generated structure, and load-profile generation conditioned on both network structure and electrical characteristics. Experiments on benchmark systems demonstrate that the proposed framework significantly improves operational feasibility and contingency robustness while maintaining strong statistical fidelity and eliminating optimization-based post-processing.
SynEnergy: Anomaly Semantic-Guided Diffusion for Synthetic Energy Data Generation
Fine-grained energy consumption data are essential for applications such as demand forecasting, demand response planning, and grid reliability assessment. However, access to such data is often restricted by privacy concerns and data-sharing constraints, motivating growing interest in synthetic energy data generation. Although existing methods can reproduce overall consumption distributions and recurring temporal patterns, they often smooth out or underrepresent anomalous events caused by extreme weather, infrastructure failures, and behavioral shifts. Preserving these events is challenging because they are sparse, localized in time and space, and shaped by heterogeneous dependencies across geographical proximity and regional attributes. To address these challenges, we propose SynEnergy, a two-stage diffusion-based framework for anomaly-preserving energy consumption data generation. The first stage, Heterogeneous Graph-based Anomaly Semantic Learning (HG-ASL), extracts region-specific anomaly semantics from sparse residual structures by jointly modeling spatial and attribute dependencies across urban regions. The second stage, Anomaly Semantic-guided Diffusion (AS-Diff), injects the learned anomaly semantics into the denoising process to generate realistic consumption sequences while preserving anomalous patterns. This design enables controllable generation for individual regions and scales naturally to city-wide settings. We evaluate SynEnergy on four real-world energy consumption datasets against 11 general-purpose and energy-specific generation baselines. Experimental results show that SynEnergy improves anomaly preservation fidelity by an average of 12.21% and downstream quality by 2.96%, while maintaining competitive overall generation fidelity compared to baselines.
Question Begets Question: Self-Evolving Curriculum for Reinforcement Fine-Tuning on Competition Mathematics
Teaching a language model a skill it has not mastered is obstructed by three recurring difficulties: training data is scarce, ground-truth reasoning traces are usually unavailable, and models often exhibit an apparent ceiling beyond which additional data yields no further improvement. We study these difficulties in a controlled setting, fine-tuning Qwen2.5-Math-7B on competition mathematics (AIME), a task on which it initially solves only 5.6% of problems (pass@1). To address data scarcity, we introduce Question-begets-Question (QbQ), a scalable procedure in which a teacher transforms existing problems into diverse variants that probe the same underlying skills; to model the absence of oracle reasoning, we train exclusively via reinforcement learning on problem statements and final answers, never on teacher reasoning traces. Static training on such data, however, plateaus well short of the task: real-plus-synthetic augmentation and non-curriculum QbQ generated synthetic data training cap pass@1 at 12.5% and 14.5% respectively, despite large increases in data. Our central finding is that this ceiling is not intrinsic to the model. We propose a self-evolving curriculum that, each round, evaluates the current checkpoint, seeds QbQ from the problems it can mostly get right, and trains on the resulting variants; under an identical data budget, this breaks the ceiling and lifts pass@1 to 16.5% with no sign of saturation after 20 rounds. Counterintuitively, we find that models improve when trained on variants of problems they can mostly get right, and that models trained this way go on to solve harder problems never seen during training.
Poplar: A Scalable Pipeline for Human-Centric Image Dataset Synthesis
Recent image generators can synthesize convincing human-centric images, yet producing a useful collection remains different from producing a single successful image. A human-centric dataset must cover varied people and contexts, avoid implausible attribute combinations, preserve an everyday photographic character, and expose quality-control decisions at scale. We present Poplar, a reproducible Specify--Render--Inspect pipeline for human-centric image dataset synthesis. Specify samples structured attributes under commonsense constraints and verbalizes them as photography-oriented prompts. Render uses a realism-adapted image generator across composition-aware aspect ratios and retries obvious technical failures. Inspect applies a single structured vision--language review to each candidate, preserving the original prompt while rejecting intrinsic image defects or material prompt mismatches. Using Poplar, we construct Poplar-9K: 9,401 curated human-centric image--text pairs retained from 11,765 reviewed candidates (79.9% acceptance). We release the dataset together with the pipeline, configurations, immutable generation prompts, and auditable inspection records as a compact resource for building customizable human-centric collections.
RF-HOI: Recognize Human-Object Interaction with Radio Frequency Signals
Recognizing Human-Object Interactions (HOI) is essential for intelligent systems, underpinning applications in virtual and augmented reality, embodied AI, and assistive robotics. However, vision-based HOI methods face challenges in privacy concerns and poor light conditions. In this work, we introduce RF-HOI, the first framework that only uses radio frequency (RF) signals for HOI recognition. A key challenge of RF-HOI is that single-modality RF sensing is insufficient to recognize both actions and the objects being interacted with. RF-HOI addresses this through a novel modality fusion that combines mmWave radar and RFID, enabling simultaneous action recognition and target identification. Another challenge is limited training data across diverse setups, which impairs the generalizability of the recognition model. To overcome this, we develop a simulator that synthesizes multimodal RF data for diverse HOIs at scale, allowing us to fine-tune with only a small amount of real-world data. Experiment results show that RF-HOI outperforms all baselines, approaching vision model performance, and that our diverse synthetic training data can significantly boost our system's performance on real-world scenarios. These results highlight the potential of multimodal RF sensing for robust and privacy-preserving HOI recognition as well as the effectiveness of our RF data synthesis.
Generative Models for Modeling and Synthesizing MIMO Channels in Adverse Weather Conditions
The push for broader coverage in future cellular networks depends on reliable service, yet this is increasingly harder to do as we encounter more instances of extreme weather conditions. In extreme weather conditions, we have difficulty evaluating coverage due to limited access to channel measurements. In this paper, we generate channel state information (CSI) in low and moderate weather conditions to synthesize realistic MIMO CSI under adverse weather conditions. Our primary contributions are to (1) synthesize MIMO channel datasets incorporating three weather types, each with three intensity levels, representative of practical 5G/6G scenarios; (2) train a diffusion model conditioned on weather using channel samples obtained through conventional pilot-based estimation under low and moderate weather intensities, and subsequently use it to generate channel realizations for severe weather conditions; and (3) evaluate the downlink Bit Error Rate (BER) and Outage Probability measures using the generated channels. The results show that diffusion-based generative models provide a scalable, data-driven alternative for channel modeling in harsh environments and can generalize to severe weather conditions using only low- and moderate-intensity training data.
A Synthetically-accessible Universe of Chemically Recyclable Polymers
Polymers synthesized via ring-opening polymerization (ROP) of cyclic monomers represent an important class of materials due to their chemical recyclability and possible insertion in several critical applications. We present a dataset of 1 million synthetically realizable ROP polymer structures generated through a combination of Virtual Forward Synthesis (VFS) and polymer expert language models and qualified by stringent chemical heuristics. VFS is used to generate ROP polymers by applying known reactions to existing monomers. The polymer foundation models polyBART and POLYT5 further enable the generation of ROP candidates, with polyBART exploring its learned latent space and POLYT5 producing candidates via sequence-to-sequence generation. The resulting ROP polymers are subjected to robust filtering criteria to ensure novelty, validity and overall data quality through a combination of automated validation pipelines and a comprehensive set of chemist-informed heuristic rules introduced in this work for the first time. We hope that this dataset will serve as a valuable resource for downstream sustainable applications.
Curriculum Matters: Data-Efficient Relational PFN Pretraining with Synthetic Data
Relational Prior-Data Fitted Networks (PFNs) such as RDB-PFN approximate Bayesian inference over multi-table relational databases by pretraining on millions of synthetic tasks. We investigate three intertwined questions about this paradigm. First, can a structurally different synthetic generator PluRel substitute for RDB-PFN's prior? Second, how much does the order in which synthetic data is presented to the PFN affect downstream performance? Third, how much relational reasoning can a PFN acquire from single-table synthetic pretraining alone, before any relational data is introduced? Using PluRel as the sole synthetic data source across all experiments, we find: (i) a progressive single-table curriculum that gradually widens schema complexity from 7 to 17 columns reaches 0.703 average ROC-AUC on the 23-task tabular benchmark using only approximately 13,300 synthetic tables (approximately 45x fewer single-table datasets than RDB-PFN's reported warm-up recipe), while the same data trained all-at-once collapses to 0.541 ROC-AUC; (ii) a relational curriculum trained from scratch on only approximately 5,500 PluRel databases reaches 0.638 average ROC-AUC on the 19-task RelBench/4DBInfer benchmark, recovering 88% of RDB-PFN's reported performance with approximately 220x less relational synthetic data; and (iii) the single-table curriculum model, evaluated directly on the relational benchmark without any relational adaptation, achieves 0.631, nearly matching the dedicated relational pipeline. Together, these findings suggest that curriculum design and synthetic data diversity may matter more for relational PFN pretraining than the specific relational generator or raw synthetic scale alone.
Meta-Task: Turning Terminal Task Synthesis into a Terminal Task for Scalable Agent Training
Training terminal agents at scale requires diverse, verifiable terminal tasks and high-quality interaction trajectories, yet acquiring such data remains a significant challenge. Existing synthesis methods face two key limitations: (1) weak reliability caused by the disconnect between task generation and real execution, and (2) limited diversity and scalability due to dependence on existing repositories. We propose Meta-Task, a framework that redefines terminal task synthesis as a Terminal-Bench-format task itself: an agent operates within a real container environment to iteratively generate, execute, and verify tasks, so that synthesized components are checked for internal consistency and executability within the generation loop itself. Building upon this, we decouple the target task requirements along multiple dimensions, introduce a multi-phase mechanism that dynamically designs novel task specifications before producing the actual tasks, and incorporate optional external material support to enhance diversity and realism. We additionally apply LLM-as-Judge filtering to ensure the quality of the final training data. Experiments on Terminal-Bench 2.0 show that fine-tuning on only 3,221 Meta-Task synthesized trajectories achieves 22.5% and 31.8% Avg Pass@1 for Qwen3-14B and Qwen3-32B respectively, outperforming concurrent approaches with significantly less training data.
ScratchSim: A Procedural Synthetic Data Pipeline for Surface Scratch Detection
While automated defect detection such as the detection of surface scratched is an important aspect in industrial quality control, the scarcity of annotated defect data make this task challenging. This paper presents a procedural rendering pipeline that generates large-scale annotated synthetic training data using BlenderProc, with configurable material appearance, camera modes, and domain randomization, producing automatic COCO-format annotations. To show the potential of our approach, we evaluate four training strategies, namely synthetic-only, real-only, mixed, and fine-tuning from synthetic weights, across two objects with different material properties and three lightweight edge-deployable detectors, YOLOX, YOLO26, and LW-DETR. Our evaluation show that fine-tuning from synthetic weights consistently outperforms real-only training, and that mixed training effectively recovers performance under scarce real-data conditions, with findings validated across both convolutional and transformer-based architectures. The proposed approach enables scalable defect detection without the burden of large real annotated datasets, making it practical for on-device industrial inspection. The pipeline scripts, 3D model, and both synthetic and real annotated scratch datasets for a glossy toy Ferrari car will be made available through the project website upon acceptance.
Pramana: A Composable, Domain-Specific Backend for Empirical Networking Research
Networking research advances by turning hypotheses into empirical evidence, so accelerating it means reducing the lag between ideation (synthesizing a hypothesis) and generating the data that tests it. Consider a concrete case: does a bulk BBR download fairly share its bottleneck with competing real-time Google Meet traffic? Validating this requires configuring a realistic bottleneck link, concurrently generating BBR's bulk transfer and Meet's real-time traffic, and collecting relevant service-quality metrics. Today this overhead is high, often forcing researchers to start from scratch for every new idea. This ideation-to-data-generation gap will only worsen in the agentic AI era, where AI-assisted ideation accelerates exponentially, yet its outputs cannot be validated without a data-generation backend. This paper explores how to bridge this gap. We envision a composable, domain-specific backend, Pramana, shaped as a thin waist, with diverse research intents at the top and disparate execution substrates at the bottom. Pramana realizes this waist through a single contract, the intent specification, which disaggregates an experiment into three independent axes: the intent (what data to generate), the substrate (where to generate it), and the mechanism (how to produce it), so one specification runs on any substrate. We demonstrate Pramana's utility by building a first-of-its-kind corpus of 255 data-generation intents mined from 66 published papers, and show the intent specification satisfies all of them, where no existing tool satisfies more than 13%. Our current proof-of-concept implementation already satisfies 34% of these intents, more than twice the best existing tool, and we lay out a roadmap for closing this abstraction-implementation gap through a broader community effort to build the envisioned data-generation backend and accelerate empirical networking research.
Surgical Re-enactment for Operating Room Workflow Datasets
The introduction of new technologies, such as surgical robots, is driving the vision of a connected, smart operating room (OR). However, realizing this vision requires a deep understanding of surgical workflows, which relies on realistic datasets capturing the actions of all OR personnel from both full room and surgical field perspectives. Acquiring such data in real ORs is prohibitively challenging due to factors such as ethics committee approvals, limited space for camera installation, and sterility regulations preventing the use of tracking markers. We present a step-by-step methodology for re-enacting complete surgical procedures in a reconstructed OR. This approach enables the creation of repeatable and annotatable workflow datasets for training activity recognition models, generating scene graphs, and formalizing surgical process models. Developed for robot-assisted ophthalmic surgery, our methodology combines expert consultation, structured workflow formalization, OR reconstruction, role-based training, real OR observation, and iterative recording with post-take debriefing. We provide concrete recommendations to allow other research groups to seamlessly adopt this methodology for their own surgical domains.
SearchArt: Training Long-Horizon Search Agent with Scalable Synthetic and Verified Task
Recent advances in large language models (LLMs) have enabled search agents to autonomously tackle complex tasks across extended search and reasoning horizons. However, training effective search agents remains challenging due to the lack of scalable and long-horizon tasks, and the difficulty of evaluating and correcting intermediate reasoning and tool-use behaviors. We introduce SearchArt, a scalable framework for training long-horizon search agents through verification-driven task synthesis and a multi-stage post-training pipeline. SearchArt constructs large-scale datasets for complex search-, research- and user-oriented tasks by synthesizing diverse information-seeking QA pairs and corresponding search trajectories from web documents and automatically generated evidence graphs. To ensure the reliability of the synthesized data, we design a verification pipeline that jointly evaluates QA consistency, trajectory quality, and the relevance of retrieved evidence. The verified trajectories are subsequently used in a multi-stage training process comprising supervised fine-tuning and reinforcement learning-based policy optimization. Search agents trained with SearchArt exhibit adaptive search planning, iterative evidence aggregation, and complex reasoning over extended interaction horizons. Experimental results demonstrate that, with only (Qwen3.5-) 27B parameters, SearchArt scores 74.39 on BrowseComp-ZH, 70.06 on BrowseComp, and 52.55 on Deepresearch-bench, matching or surpassing frontier closed-source agents on both deepsearch and deepresearch benchmarks.
Synthetic data generation framework for quality control automation in gravure printing
Quality control in printing, particularly in rotogravure printing, still depends on slow, costly, and subjective manual inspection. Automated surface defect detection is critical for maintaining high-quality standards in rotogravure printing. Deep learning models give prospects for automation. However, training robust deep learning models, such as YOLO or Vision Transformers, is heavily hindered by the extreme scarcity of real-world industrial defects images. To overcome this limitation, this paper introduces a novel synthetic data generation framework tailored for rotogravure printing quality control. The proposed pipeline automatically generates high-fidelity images of specific printing defects (creases, streaks, misregistration, etc.) and outputs corresponding bounding boxes and annotations. To validate the framework, a synthetic dataset of 7533 images was generated and used to train the state-of-the-art object-detection model RFDETR. Experimental results demonstrate that the model trained on our synthetic data achieves a Mean Average Precision (mAP) of 80.9% on real industrial testing samples. This framework provides a zero-cost, rapid-deployment solution for automating defect inspection in printing lines without requiring massive manual data collection.
Synthetic minority data is redundant or invalid: a data-dependent validity theory and a de-biased test
For two decades, the standard remedy for class-imbalanced learning has been to fabricate synthetic minority examples, and the standard evidence of their validity has been a check that cannot fail: synthetic points are scored against the very data that generated them. We de-bias the check. Validity becomes a population quantity -- the probability that a synthetic point truly belongs to the minority class -- with a consistent estimator that scores synthetic points against withheld real data. Where held-out ground truth is available, the classical test underestimates true invalidity in 96-99% of method-by-imbalance-ratio cells, while the de-biased estimator tracks it closely. We prove validity is a property of the data, not the method: class overlap sets an invalidity floor no faithful generator escapes, making oversampling redundant where classes separate and invalid where they overlap. Across 91 methods, three classifiers, and datasets spanning medicine and finance -- including a generator engineered to pass the classical check -- none clears both bars: gains over the best trivial baseline are noise-thin (median below 0.01 F1, a decision threshold's reach), and most damage calibration. We release the audit as a pip-installable test and flip the burden of proof: synthetic minority data must now demonstrate, on the data at hand, both validity and information gain.
Persian Pixel: A large-scale synthetic OCR dataset for Persian language
Optical Character Recognition (OCR) for Persian remains substantially less mature than for Latin-script languages despite Persian being spoken by more than 110 million people across multiple countries. This gap arises from two fundamental challenges: the intrinsic complexity of the Perso-Arabic writing system and the limited availability of large-scale, high-quality annotated datasets. Persian script exhibits obligatory cursive connectivity, context-dependent glyph shaping, extensive ligatures, diacritic placement, and stylistic variation across writing forms such as Naskh and Nastaliq, all of which significantly complicate text recognition. At the same time, the high cost and labor-intensive nature of manual annotation have created a persistent data bottleneck, limiting the development of robust OCR systems and slowing progress in Persian document digitization.In this paper, we introduce Persian Pixel, a comprehensive synthetic OCR dataset specifically designed to address these challenges. Comprising over 343,000 high-fidelity image text pairs, the dataset spans sentence, paragraph, and full-page document layouts generated from a carefully curated seven-million-word Persian corpus using the SynthOCR-Gen rendering framework. The generation pipeline faithfully models the typographic characteristics of Persian script, including contextual character joining, positional glyph variants, diacritic placement, and multiple representative Persian typefaces. To bridge the synthetic-to-real domain gap, the rendered images are further enriched with more than twenty-five stochastic degradation models that emulate realistic document acquisition artifacts, including ink bleed, paper aging, blur, illumination variation, scanner imperfections, compression artifacts, and multiple noise processes.By overcoming the long-standing scarcity of annotated Persian OCR data, Persian Pixel provides a scalable and openly available resource for training and fine-tuning modern OCR architectures, including transformer-based models such as TrOCR and Donut. The dataset establishes a strong foundation for research in Persian document analysis, historical manuscript digitization, and end-to-end document understanding, while demonstrating that programmatic synthetic data generation offers a practical, cost-effective, and scalable alternative to manual annotation for advancing OCR in low-resource and typographically complex scripts.
SenWorld: A Digital-Twin Simulation for Generating Context-Rich Evaluation Data
Smartphone personal assistants reason over longitudinal personal data, yet evaluating them requires context-rich evaluation data whose correct answers are known, and real device traces are too privacy-sensitive to share. To address this challenge, we present SenWorld, a physically grounded, deterministic, event-sourced digital-twin simulation that generates such data with ground truth fixed by construction. In SenWorld, personas live through a full day in a world built from real map, weather, holiday, and network data; every observable signal is archived in full-system snapshots; and each evaluation case is labeled by a pointer to an existing record rather than by post-hoc annotation or a large language model (LLM) judge. We evaluate this method with 16 personas in Beijing. The generated data closely matches the held-out real-user benchmark in category distribution (Jensen--Shannon divergence (JSD) 0.070) and in the daily rhythm of communication records (JSD below 0.1), though generated records remain shorter than real ones. Without scripted interaction, personas form a fully reciprocated dialogue subgraph and differentiated behavioral repertoires. Projected into 717 evaluation cases, the generated data exposes 78 failures in a production smartphone assistant, concentrating on call and Short Message Service (SMS) records while contacts, schedules, and alarms never fail. The snapshot pointer confirms each failure as an assistant-side retrieval error, with no LLM judge involved. Overall, SenWorld offers a privacy-safe, reproducible, and distribution-checked path to evaluation data whose labels are fixed by construction.
G-MAD: A Game-Based Data Generation Framework for Multi-View RGB-T Aerial Object Detection
This work introduces G-MAD, an open-source framework that uses Arma3 to generate synchronized multi-view RGB-T data for aerial object detection. G-MAD addresses key limitations of real-world aerial dataset construction, including limited viewpoint control, imperfect RGB-T alignment and high annotation cost. The framework supports structured scenario specification, controllable multi-view camera placement, simultaneous visible/thermal capture, and automatic bounding box annotation using engine-level geometric metadata. These capabilities enable controlled studies of viewpoint variation, multi-modal fusion, and synthetic-to-real transfer in aerial object detection. Besides, using G-MAD, we construct and release AMOD, a new large-scale multi-view aerial RGB-T object detection benchmark. The source code and the dataset are available at https://unique-chan.github.io/G-MAD-Project.
Trace: A Taxonomy-Guided Environment for Multidomain Visual Reasoning
Reinforcement learning with verifiable rewards (RLVR) has substantially improved language-model reasoning, yet its extension to vision-language models remains constrained by the lack of training data that are simultaneously broad, exactly verifiable, and reproducible. We introduce Trace, a taxonomy-guided environment for multidomain visual reasoning. Trace factorizes task construction into a scene grammar and an executable task program, separating visual realization from answer computation. A shared semantic state determines the rendered image, prompt, typed answer, verifier state, and replayable instance trace. The resulting environment comprises 1,000 tasks over 277 scene grammars and 11 visual domains, with controlled semantic and visual variation. RLVR on 64,000 Trace instances improves the macro-average across 24 external benchmarks by 3.51 percentage points for Qwen2.5-VL-3B and 4.06 points for Qwen2.5-VL-7B, providing evidence that broad procedural training can transfer beyond the generated task distributions. Project page: https://maveryn.github.io/trace/.
Generating Bearing Vibration Signals at User-Specified Fault Probabilities Using PR-GAN and Counterfactual Methods
In bearing vibration datasets, most samples receive predicted fault probabilities close to 0 or 1, while samples with intermediate (gray-zone) probabilities are rare. Such borderline samples are important because they reflect conditions in which maintenance decisions may require additional inspection or a conservative response and are useful for studying decision boundaries. To address this scarcity, this paper proposes and compares two approaches that generate vibration signals whose predicted fault probability matches a target probability of 0.25, 0.50, or 0.75. We use the average output of a heterogeneous ensemble classifier with different architectures and random initializations as a fixed, gradient-accessible probability oracle. The first, training-based approach, Probability-Regularized Generative Adversarial Network (PR-GAN), extends Wasserstein Generative Adversarial Network with Gradient Penalty (WGAN-GP) and edits a real signal through a residual generator while pushing the classifier output toward the target probability. The second is a training-free, per-sample Wachter-style counterfactual (CF) procedure that directly optimizes each input signal to reach the target probability while remaining close to the source signal. We evaluate both methods on the Case Western Reserve University (CWRU) and Paderborn bearing datasets using mean absolute target-probability error, time-domain total variation, and frequency-domain log power spectral density (log-PSD) differences. Across all settings, CF reaches the target with a mean absolute probability error of 0.005-0.008 and a within-tolerance success rate of 1.000 on retained samples, whereas PR-GAN's mean error is 0.046-0.059 with success rates between 0.501 and 0.680. CF therefore steers the probability more reliably and requires smaller average L1 changes, whereas PR-GAN has a lower reported runtime in most settings.
Fast Generation of Representative Synthetic Dataset with Salsa to Train ATR Models with Electromagnetic Couplings Data-Augmentation
This work focuses on training Automatic Target Recognition (ATR) models using simulated Synthetic Aperture Radar (SAR) images to circumvent the lack of real measurements. To obtain robust and versatile ATR models, simulation needs to generate massive datasets that encompass all the variability found in real measurements. Thus, we need a simulator that finds a good tradeoff between execution speed, computational resource consumption, and physical representativeness. In this work, we demonstrate that the Salsa simulator addresses this issue. We ran computing performance tests to show that Salsa can generate 21,600 synthetic images in less than 10 minutes using a single Nvidia GeForce RTX 4090 GPU. Using our ADASCA Deep Learning approach, we demonstrate that these data are sufficiently representative to train ATR models and reach state-of-the-art results on the MSTAR public dataset with an accuracy of 86 %. To illustrate how Salsa unlocks new possibilities to train ATR models, we use the simulator to conduct a study on Electromagnetic (EM) couplings between the targets and their immediate environment. We demonstrate that, if not accounted for in the training dataset, the variability of the EM couplings induced by the variability of the ground surfaces can significantly degrade the performance of ATR models, with an accuracy decrease of more than 4 %. We also show that Salsa can generate in a timely manner (i.e., in less than 4 hours using the same GPU as previously) a massive dataset of 648,000 images with a large variety of couplings to make the ATR models robust to EM coupling variations. Our ATR models can then achieve an accuracy of 87 % on the MSTAR dataset.
Text-conditioned Segmentation for Tomato Phenotyping via Procedural Synthetic Data
Vision-based automation is an excellent candidate for reducing manual labor in greenhouse crop production and phenotyping. However, progress is constrained by the lack of annotated training data. Recent advances in vision-based foundational models have shown promising results in zero-shot generalization to novel domains, but their performance drops in complex agricultural environments. In this work, we present a sim-to-real framework for tomato plant segmentation that combines synthetic data generation with fine-tuning of a foundation model. We model a commercial cherry tomato greenhouse and use it to generate a large-scale synthetic dataset under diverse viewpoints, lighting conditions, and plant morphology. Subsequently, we fine-tune the Segment Anything Model 3 (SAM 3) on the synthetic dataset, specializing its text-conditioned segmentation behavior for greenhouse crop organs while retaining the general visual prior that makes zero-shot transfer possible. By evaluating our framework on multiple real-world greenhouse datasets, we demonstrate that combining synthetic data with SAM 3 fine-tuning significantly improves segmentation performance and model confidence. To support community benchmarking, we publicly release the procedural model, the generated synthetic dataset, and our fine-tuned SAM 3 weights.
SEE: Structure-aware Exploring & Exploiting for Long-horizon GUI Agent Trajectory Synthesis
Graphical User Interface (GUI) agents powered by vision-language models hold promise for automating real-world mobile tasks. However, progress is limited by the lack of high-coverage, long-horizon interaction trajectories collected from element-rich and rapidly evolving apps. Existing pipelines often rely on costly human demonstrations or on-policy framework, which tends to over-sample common flows while missing rare transitions and complex multi-step procedures. To address this problem, we propose SEE, a two-stage data synthesis framework consisting of (i) an efficient exploration stage that builds an explicit UI transition graph over screens and elements, and (ii) a graph-based synthesis stage that composes diverse multi-step trajectories via planning and controlled sampling. This design yields reproducible and explainable data generation, while explicitly preventing spurious cycles and enabling long-horizon composition. Across multiple real-world apps, SEE produces trajectories with an average length of 14.8 steps while avoiding spurious loops, and agents fine-tuned on SEE achieve improved task success and generalization to unseen screens. We will publicly release our synthesis code and dataset.
Addressing Limited Data in Auditory Attention Decoding with Diffusion Generative Models
Limited training data constrains deep learning models for Auditory Attention Decoding (AAD) in hearing aids (HAs). AAD uses electroencephalogram (EEG) data to decode listener's attention, enabling real-time tracking of specific sound sources. However, achieving high AAD performance with short time windows typical in HAs (<=1s) is challenging due to the scarcity of real-world speech-evoked EEG data. To address this issue, we investigate diffusion probabilistic models (DPMs) for generating synthetic speech-evoked EEG data. DPMs learn the underlying complex data structure through a denoising process and can generate realistic samples suitable for data augmentation. We evaluate the use of synthetic EEG data for augmenting datasets in locus-of-attention (LoA) classification tasks. Our experiments demonstrate that DPMs can generate realistic EEG signals and that incorporating synthetic data significantly improves AAD performance compared to models trained solely on measured EEG data (p<0.05). These results highlight the potential of diffusion-based data augmentation to mitigate training data limitations and improve the robustness of short-window AAD models in HA applications.
SAGA: Synthetic Agentic Graph Architecture for Temporal Benchmark Generation
High quality temporal graph benchmarks with rich semantics and ground-truth anomaly labels are essential for training graph neural networks, yet remain scarce due to privacy constraints and annotation costs. We present SAGA (Synthetic Agentic Graph Architecture), a system for generating large-scale, semantically rich temporal graphs via a four-phase pipeline. Our Skeleton-First, Semantics-Second architecture decouples structure from semantics: (S) an O(1)-per-edge skeleton generator produces power-law graphs; (A) a dispatcher partitions causally ordered time blocks for parallel execution; (G) LLM agents inject domain semantics using RAG-based rule bases across four domains; and (A) a state alignment engine resolves conflicts via temporal replay, yielding anomaly labels as natural byproducts. Unlike structural generators (e.g., LDBC SNB, Kronecker/R-MAT) or purely LLM-based approaches, SAGA achieves structural realism, semantic richness, and automatic anomaly labeling in a unified framework. On a single H100 GPU with vLLM batching, SAGA generates 500,000 temporal edges with controlled anomalies in under 90 minutes, scaling to 100,000 nodes while maintaining clustering coefficients above 0.99. The system supports real-time pipeline visualization, interactive multi-domain tuning (Finance/AML, Network/IDS, Cyber/APT, Transportation), and a CLI for large-scale GPU-based experiments.
DADIR: Density-Aware Data-level Imbalanced Regression Framework
Imbalanced learning addresses predictive modeling problems with underrepresented regions of the data distribution. Although widely studied in classification, imbalanced regression remains challenging because of continuous target variables and heterogeneous density distributions. Existing data-level methods often rely on fixed target partitioning or synthetic sample generation without jointly considering density variations and local feature-space structure. We propose DADIR, a Density-Aware Data-level Imbalanced Regression framework that exploits density information throughout the balancing process. DADIR comprises three components: (1) Density-Aware Adaptive Partitioning (DAAP), which recursively partitions the target space according to density variations; (2) a Density-Regularized Conditional Variational Autoencoder (DR-CVAE), which preserves sparse-region representations while learning latent features; and (3) latent-space data balancing, which combines feature-level clustering with oversampling to generate structurally consistent synthetic samples. Together, these components identify minority regions more effectively, preserve sparse-region information, and generate realistic synthetic data. The resulting balanced dataset can be used directly with existing regression models without modifying their architecture or learning objective. Experiments on diverse imbalanced regression datasets demonstrate consistent improvements in predictive performance, particularly in underrepresented regions, while also improving overall accuracy.
Simulate to Generalize: Scaling Stateful Supervision for API-calling Agents using LLM World Models
Training agents that generalize to unseen, stateful environments requires a massive dataset of state-changing trajectories covering a vast and diverse set of APIs. However, scaling this broad supervision is severely bottlenecked by the immense effort required to implement and populate fully-executable environments across a broad spectrum of domains. To bypass this barrier, we introduce a data generation pipeline that decouples data synthesis from environment construction by leveraging LLMs as digital world models. Starting from only a list of broad domain names, our automated pipeline synthesizes diverse APIs and tasks. To produce trajectories, a teacher agent iteratively solves these tasks while an LLM simulator dynamically tracks state and provides coherent API responses on-the-fly. Finally, an automated judge filters the trajectories for quality. Fine-tuning on our broad synthetic dataset yields significant performance gains on AppWorld and OfficeBench, two challenging stateful benchmarks featuring environments completely unseen during training. These results establish our LLM world model-based synthesis approach as a highly scalable path for training generalizable, stateful API-calling agents.
ReqGenX: An Empirical Study of Atomic Decomposition, Artifact Regeneration, and Reconstruction for Legacy SRS Documents
Background: Evaluating automated Software Requirements Specification (SRS) generation is challenging because few datasets provide fine-grained traceability between source requirements, intermediate elicitation artifacts, and generated specifications. Aims: We aim to study whether legacy SRS documents can be transformed into traceable synthetic pre-SRS artifacts that support fine-grained evaluation of LLM-based SRS generation. Method: We conduct an empirical study using ReqGenX, a controlled pipeline that decomposes SRS sections into source-grounded atomic statements, routes atoms to standards-inspired artifact types through multi-LLM plurality voting, and generates artifacts using constrained prompts with iterative judge-guided refinement. We evaluate ReqGenX on seven PURE SRS documents using grounding, quality, information retention, and downstream reconstruction analyses. Results: ReqGenX produces faithful and usable atoms, with median AlignScore values typically between 0.96 and 0.99 and Prometheus scores ranging from 4.34 to 4.85. Generated artifacts remain strongly grounded in their source atoms, with AlignScore values typically between 0.80--0.94 and judge pass rates near 100%; stricter Prometheus evaluation yields pass rates from 54.8% to 97.1%. In a downstream SRS reconstruction case study, artifact-backed atoms remain recoverable from generated SRSs, with SBERT means between 0.69 and 0.75 and AlignScore medians between 0.76 and 0.84. Conclusions: Traceable synthetic pre-SRS artifacts can support more fine-grained evaluation of LLM-based SRS generation, while exposing tradeoffs among faithfulness, information retention, and artifact completeness.
On the Failure of Boundary-Seeking Distillation in Bottlenecked Generative Architectures
Data-free knowledge distillation transfers the knowledge encoded in a teacher model to a student model without access to the original training data. Prior work such as Contrastive Abductive Knowledge Extraction (CAKE) achieves this for classifiers by synthesizing samples near the teacher's decision boundary. In this work, we investigate whether this boundary-seeking principle extends to autoencoder distillation through experiments on the MNIST dataset . To enable a direct comparison, we reformulate continuous reconstruction as a dense, per-feature classification task, allowing the decoder to output categorical logits. We show that boundary-seeking objectives are fundamentally ill-posed in bottlenecked generative architectures. CAKE operates on a single, instance-level objective, but a decoder acts as an array of tightly coupled, feature-level classifiers constrained by a shared low-dimensional bottleneck. Independently sampling contrastive targets for these coupled outputs violates the geometry of the learned latent manifold and produces severe gradient conflicts instead of informative boundary samples. Manifold-aware synthesis bypasses these conflicts entirely and establishes an effective baseline for data-free generative distillation.