Adaptive Traffic Signal Control

The coordination of Automated Guided Vehicles (AGVs) in high-density industrial environments represents a critical challenge within Logistics 4.0, as traditional traffic management methods often lead to inefficiencies caused by negotiation-based priority assignment. To overcome the resulting limitations, this paper presents an innovative AGV traffic management system based on a Lifelong Multi-Agent Path Finding (L-MAPF) algorithm operating on roadmaps generated with Non-Uniform Rational B-Splines (NURBS) curves. The approach guarantees locally optimal coordination and ensures safe operation of large and heterogeneous AGVs. Building on this concept, the proposed framework integrates a modified version of the Bounded Horizon Conflict Based Search (CBS) technique within a Rolling Horizon Conflict Resolution strategy, utilizing an extended time horizon for each agent to enable effective conflict resolution in corridors identified by a topological map. In contrast to state-of-the-art methods for AGV fleet traffic management, the proposed solution is designed for real-world, non-standardized (i.e., non-grid-like) industrial settings characterized by narrow bidirectional corridors and high-traffic density, where AGVs of various sizes and capabilities operate simultaneously. Key contributions include an anytime conflict resolution strategy with adaptive time horizon regulation, an execution layer for safe and standard-compliant interaction with real AGVs, and an advanced mechanism for deadlock detection and resolution. Experimental results obtained in realistic industrial environments demonstrate higher throughput, with improvements of up to 11% over a conventional rule-based traffic management system, a state-of-the-art industrial method, and a priority-based L-MAPF variant, while maintaining continuous operation and improved efficiency.

Timely delivery of delay-sensitive information over dynamic, heterogeneous networks is essential for NextG interactive applications, yet providing strict End-to-End (E2E) peak latency guarantees remains an open challenge. Two obstacles limit the adoption of learning-based network control in this setting: traditional volume-based routing metrics, while highly effective for general traffic management, are not designed to capture traffic urgency; and Deep Reinforcement Learning (DRL) controllers trained from scratch suffer from sample inefficiency, long training times, and early-stage exploration volatility. This paper introduces a deployment-focused network control framework that addresses both obstacles. First, we present Effective Congestion (EC), a deadline-aware metric family that quantifies interface congestion by packet urgency and proactively filters non-viable traffic, coupled with a Uniform Path Grouping (UPG) distribution heuristic promoting robust load-balancing; the resulting policies are embedded into Multi-Agent Deep Reinforcement Learning Effective Congestion ($p^*$) (MADRL EC ($p^*$)), a hybrid architecture combining a distributed scheduler with a centralized RL-based router. Second, we introduce a unified training objective that generalizes existing policy-learning paradigms---behavioral cloning, offline Reinforcement Learning (RL), online RL, and offline-to-online schemes---as special cases, combining a live-reward term, a pre-collected-reward term, and a policy-imitation term. From this objective, we derive the Model-Guided Annealed Reinforcement Learning (MGA-RL) protocol, instantiated on a Deep Deterministic Policy Gradient (DDPG) backbone: a deployment-oriented, demonstration-driven training approach that generalizes conventional Offline-to-Online (O2O) schemes, in which trajectories from a lightweight [...]

Road traffic noise remains a major environmental challenge, yet most speed management strategies are static and do not respond to short-term variations in traffic noise emissions. Although variable speed limit (VSL) systems are widely deployed for safety and congestion mitigation, traffic noise is rarely treated as an explicit operational control objective. This paper proposes a noise-aware VSL framework that integrates aggregated traffic-state estimation with a simplified CNOSSOS-EU-based emission indicator. A stage-based controller with time-varying reference thresholds dynamically adjusts discrete speed-limit levels in response to estimated emission conditions. The framework is evaluated using microscopic traffic simulation calibrated with empirical motorway data and replicated across multiple stochastic realisations. Over a 24-hour evaluation period, the adaptive strategy reduces the receiver-based equivalent sound level by 2.9 dB(A) relative to unrestricted traffic conditions, while maintaining an average vehicle speed approximately 11.3 km/h higher than a permanently imposed low-speed regime. Period-wise analysis shows that speed reductions are activated selectively when emission levels approach calibrated targets, rather than enforcing a constant intermediate limit. Traffic stability indicators reveal moderate increases in speed variability compared with unrestricted operation, but substantially lower braking intensity than under uniform low-speed enforcement. These results demonstrate the feasibility of integrating environmental performance indicators into operational speed control, providing a practical complement to conventional infrastructure-based noise mitigation measures.

Reinforcement learning achieves strong traffic signal control performance in simulation, yet policies trained in simulators often fail once deployed in the real world, a failure known as the Sim-to-Real gap. When RL is applied to traffic signal control, this gap arises from several sources: sensing, action execution, traffic dynamics, and the control objective. Their relative impact and the reliability of existing Sim-to-Real mitigation methods remain insufficiently understood, and the field lacks a standard benchmark for systematically measuring the gap and evaluating mitigation methods. We present Sim2Signal, a benchmark that decomposes the Sim-to-Real gap into observation, action, transition, and reward gaps, corresponding to mismatches in the four components of the underlying MDP, and induces each gap in isolation under a shared protocol. We evaluate 18 mitigation methods on 2 base controllers, across 33 gap settings and 10 calibrated networks built from 5 real-world locations. We find that direct transfer consistently degrades performance across all four gap sources, but the severity of the degradation does not predict the effectiveness of mitigation. Instead, mitigation effectiveness depends strongly on the network and gap setting: outside the action gap, a method that helps in one case may fail in another. The most effective methods generally estimate what the gap changes, rather than make the policy insensitive through domain randomization or invariant representations. Our code is available at https://github.com/DaRL-LibSignal/Sim2Signal

In the present work an efficient border control management procedure is proposed. Compared to operational queue management systems, whose operations are based on mostly static data, the proposed work takes into account dynamic traffic conditions, thus enabling optimal performance, even in cases of uncertainty. To this end, we are proposing a multi-modal Artificial Intelligence (AI) framework, tailored to th needs of border control systems, which enables real-time queue prediction, management, and resource optimization. The novel proposed approach integrates heterogeneous data sources and presents them through a unified representation by employing Long Short-Term Memory (LSTM) networks for queue forecasting. Furthermore, it leverages Model Predictive Control (MPC) and scheduling optimization to derive actionable control policies, which in turn can be presented to border control officers. The proposed work has been evaluated using synthetic data simulating realistic traffic. The evaluation results demonstrate that the proposed method reduces queue prediction error by up to 35% and average waiting time by 30%. Accordingly, the average throughput increases by nearly 20%, compared to ARIMA and rule-based methods. The abovementioned results show the effectiveness and efficiency of combining AI architectures with optimization techniques for proactive and adaptive border traffic management.

In Intelligent Transportation System (ITS), unmanned aerial vehicle (UAV)-based surveillance offers an innovative solution to traffic surveillance with wide coverage and real-time data collection capabilities. In comparison to fixed ground-based infrastructure, UAVs are able to respond to dynamic traffic but present challenges such as vehicle detection at varying altitudes, compensation for motion-induced image variations and efficient processing of high-resolution images. Deep learning has been largely beneficial on improving the detection accuracy; however, for practical deployment, a critical assessment of the accuracy, latency, and harmonization with current transportation systems needs to be carefully considered. This survey reviews recent advancements in the UAV-based traffic monitoring, with a primary focus being deep neural network models for traffic analytics in various urban settings. Three main challenges identified in the literature are ensuring compatibility with traffic control systems, achieving real-time processing to optimize traffic flow, and maintaining robust detection in different environmental conditions. Existing solutions often lack comprehensive frameworks for utilizing UAV captured data to respond to incidents and manage traffic effectively. Future research should focus on optimal detection models, edge processing, and adaptive control integration to improve the responsiveness of urban traffic management.

Deep reinforcement learning (DRL) agents achieve strong performance in complex environments, yet their decision-making processes remain difficult to interpret. We introduce SPOT (Sampling Policy Observation Tree), a novel model-agnostic, sampling-based framework for interpreting DRL policies. Given access to the policy and an environment simulator, SPOT constructs an interpretable finite-horizon tree by sampling actions and recursively simulating the resulting successor states. The tree provides an empirical representation of the policy's action preferences and their possible downstream evolution. We provide formal guarantees establishing SPOT's asymptotic recovery of the policy's unique most probable action and characterizing its disagreement behavior under high-entropy policies. We demonstrate SPOT in the SUMO-RL traffic-signal control domain. The case study illustrates how its tree-based representation can be used to inspect policy preferences, compare alternative future trajectories, and reveal downstream behaviors that are not visible through single-timestep feature-attribution methods.

Traffic shockwaves are stop-and-go waves that propagate upstream through the streams of vehicles and are one of the major causes of traffic congestion, fuel inefficiency, and increased accident rates in modern transportation systems. Although Connected and Autonomous Vehicles (CAVs) offer a promising opportunity to mitigate such shockwaves, most existing control strategies rely on global traffic state information, making them impractical for early-stage deployment of Vehicular Ad-hoc Networks (VANETs). In this paper, we propose a decentralized Multi-Agent Reinforcement Learning (MARL) framework that integrates a Graph Neural Network (GNN) to enhance the control architecture of connected and autonomous vehicles. The proposed approach enables vehicles to learn cooperative control policies using locally available information and interaction with neighboring vehicles. The effectiveness of the proposed scheme is evaluated using a scalable simulation environment under realistic highway traffic conditions. Simulation results show that the proposed GNN-based MARL framework can reduce the propagation of traffic shockwaves by up to 80%, even when only 10% of the vehicles are connected.

We present a traffic-signal control interface in which a shared graph neural network assigns scores to individual traffic movements. Each junction converts these scores into its own variable-sized set of legal signal phases using a deterministic incidence matrix. Directed corridor nodes provide traffic context, while movement nodes represent controlled input-to-output paths through junctions. Typed mean aggregation produces one scalar per movement; phase definitions and signal timing remain outside the learned network. This makes graph size and junction-specific action count independent of the learned parameter shapes. PPO experiments evaluate the interface on unseen synthetic grid geometries, altered signal coverage, and five heterogeneous city graphs. The policies retained performance across unseen geometries within the synthetic grid family, while changes in signal coverage exposed sensitivity to a signal-coverage distribution shift. A single trained city-policy instance executed across all five city graphs, with heterogeneous outcomes. These results provide feasibility evidence rather than a general estimate of transfer to arbitrary road networks.

Eco-Cooperative Adaptive Cruise Control (Eco-CACC) systems rely on accurate localization, signal timing, and interaction awareness to optimize energy consumption at signalized intersections. Existing approaches typically assume that the internal world model used for optimization remains valid, making them vulnerable when sensing outages or semantic inconsistencies invalidate planning premises. This letter proposes an Integrity-Gated Eco-CACC framework that explicitly monitors the consistency between internal vehicle beliefs and external sensing. A unified integrity metric is constructed by combining positional innovation, observability loss, and semantic inconsistencies. The resulting trust score regulates control authority, enabling a transition between nominal eco-driving and a safety-dominant fallback maneuver. Unlike robust control methods that attempt to preserve performance under uncertainty, the proposed framework regulates whether energy-optimal control remains admissible. Scenario-based simulations demonstrate that the method preserves nominal efficiency when model consistency is maintained, while enabling early and conservative responses under integrity degradation.

Urban traffic congestion significantly increases fuel consumption, greenhouse gas emissions, and commuter delays, resulting in substantial economic losses and environmental harm in modern cities. Traditional traffic signal control strategies such as fixed-time scheduling, actuated control, and reinforcement learning (RL)-based methods, offer different degrees of adaptability; however, RL-based methods can require extensive retraining, careful reward design, and substantial simulation data when transferred across networks or demand regimes. To address these challenges, we propose HiLLTS, an LLM-guided traffic signal control framework that employs a hierarchical three-layer architecture consisting of a central coordination agent, a district layer and multiple cluster-level intersection agents. Experimental results demonstrate consistent improvements in both congestion and environmental performance. Compared with the strongest non-LLM baseline in each scenario, HiLLTS reduces average waiting time by 36.73% under the low-congestion scenario and 14.71% under the high-congestion scenario, while reducing average CO2 emissions by 7.87% and 8.57%, respectively. Larger gains are observed against weaker baselines: under low congestion, HiLLTS achieves reductions of up to 18.00% in emissions and 62.07% in waiting time relative to Fixed-Time control; under high congestion, reductions of up to 28.89% in emissions and 40.36% in waiting time are observed relative to Max Pressure. The ablation study further validates the contribution of LLM-guided coordination over rule-based control

Vehicle coordination at unsignalized intersections relies on accurate real-time vehicle state acquisition and reliable command-and-control (C&C) signal delivery. However, existing studies typically treat sensing, communication, and control separately, which may lead to redundant transmissions, outdated state information, and unreliable vehicle coordination. In this paper, we investigate a new scenario of distributed integrated sensing and communication (ISAC)-enabled vehicle coordination at intersections, where multiple roadside units (RSUs) collaboratively transmit sensing signals for vehicle state acquisition and C&C signals for vehicle movement control under the management of a central base station (BS). To improve signaling efficiency, we propose a unified goal-oriented semantic communication (GSC) framework, which transmits sensing and C&C signals only when they are semantically important for improving intersection traffic throughput. Specifically, an extended Kalman filter (EKF) is adopted to predict vehicle states and fuse distributed sensing measurements. A masked hybrid proximal policy optimization (MHPPO) framework is then developed to jointly determine sensing transmission decisions, C&C transmission decisions, and C&C signal contents based on a value-of-information (VoI) reward. Furthermore, we propose an uncertainty-aware transmission design (UTD), including robust beamforming and VoI-based time-division power allocation, to improve sensing and communication reliability under vehicle state uncertainty and inter-RSU interference. Simulation results show that our proposed framework achieves 100% collision-free vehicle coordination with significantly reduced signaling overhead compared with predictive ISAC baselines adapted from state-of-the-art related studies and several ablation baselines.

This paper presents a novel framework for integrated Decision-Making (DM) and Trajectory Planning (TP) for automated vehicles at unsignalized intersections. The approach leverages a Finite Horizon Optimal Control Problem (FHOCP) that employs Time-Varying Artificial Potential Fields (TV-APF). By utilizing short-horizon motion prediction and a dedicated conflict-zone occupancy coefficient, the framework suitably accounts for potential collisions within the FHOCP. The proposed method effectively unifies DM and TP, ensuring the generation of a feasible and safe reference trajectory. Simulation results in multi-vehicle traffic scenarios demonstrate the effectiveness of the approach.

Interactive driving, wherein an intelligent lead vehicle equipped with real-time traffic data coordinates route choices of connected vehicles, offers a promising approach to dynamic traffic management. To address the challenge of harmonising decisions, this paper considers the strategic information revealing framework of Bayesian persuasion. Here, the principal (lead vehicle) aims to guide the agent's (connected vehicle) partially observable sequential decision making towards its own objectives by selectively revealing information, such as real-time traffic ahead, using signals. However, the agent's farsighted response to maximize its long-term reward, renders the principal's signaling strategy design computationally challenging. We propose an online structured reinforcement learning framework to synthesize computationally efficient signaling strategy which is persuasive for a far-sighted agent. The main contributions of the paper are as follows: (i) For a monotonic agent with approximate best response, we propose MAPL, a structured policy learning algorithm for faster online learning, (ii) Identification of sufficient conditions for the supermodular structure of the Q function of the principal for a monotonic agent, (iii) Identification of sufficient conditions to ensure the persuasiveness of the principal's signaling strategy, (iv) Supermodular Q learning for Principal (SQP), which leverages the supermodular structure of principal's action value to synthesize computationally efficient signaling strategy that is persuasive for a monotonic learning agent, (v) Numerical analysis considering a real-time application of Bayesian persuasive driving for lane selection demonstrates that the proposed method is 30% cost efficient for optimising travelling rewards of both the lead and connected vehicle compared to the existing methodologies for signaling strategy design.

Traffic signs are crucial components of road safety, serving as visual tools under all lighting conditions. The Manual on Uniform Traffic Control Devices (MUTCD) specifies daytime visual factors such as legibility and color contrast, and nighttime retroreflectivity requirements. Traditional assessment methods rely on manual inspections, which the Federal Highway Administration (FHWA) notes are subjective, labor-intensive and pose safety concerns, while retroreflectometers are expensive and unaffordable for smaller agencies. Most existing studies focus on either daytime factors or nighttime retroreflectivity but rarely integrate both aspects comprehensively. This study develops a novel framework that systematically evaluates traffic signs through integrated daytime-nighttime assessment. The methodology employs three fine-tuned Vision Language Models (VLMs) for daytime visual performance assessment across four key factors: legibility, color, surface and shape integrity, and surrounding environment conditions. VLM predictions are converted to numerical scores through sentiment analysis and Contrastive Language-Image Pre-Training (CLIP) scoring, while nighttime performance is assessed using LiDAR-derived retroreflectivity following established calibration procedures. The framework integrates these components into a comprehensive Sign Condition Index (SCI) for maintenance guidance. Evaluation results demonstrated that LLaVA and Qwen outperformed InternVL, achieving bidirectional cosine similarity scores of 0.67-0.76 across all factors. Among 462 validated traffic signs, 68 were flagged by the proposed framework as requiring immediate replacement due to inadequate retroreflectivity performance. This research provides a cost-effective alternative to traditional manual inspections for comprehensive traffic sign condition assessment.

Reinforcement Learning (RL) has emerged as a powerful paradigm for adaptive traffic signal control. However, in safety-critical infrastructure like traffic control, the opaque, black-box nature of deep RL models poses challenges for transportation agency acceptance, regulatory compliance, operational trust, troubleshooting, and fine-tuning. To bridge this gap between high-performance optimization and human-comprehensible interpretability, this effort introduces a novel, explainable entity centric RL framework for safe and transparent traffic signal control. Rather than processing traffic states through monolithic, flat vectors, the proposed architecture disaggregates real-time intersection observations into distinct, high-dimensional lane entities and phase temporal configurations to inherently preserve the structural topology and geometric configurations of the intersection. Relational dependencies and inter-lane conflicts are dynamically extracted via a dual-stage attention network featuring sequential multi-head cross-attention and self-attention blocks. This design yields a real time affinity matrix that quantifies the direct influence of signal phases on specific approach volumes and queues, providing full visual and analytical interpretability. To ensure strict operational reliability, a deterministic action-masking interface is integrated directly into the Proximal Policy Optimization pipeline, explicitly blocking invalid phase transitions to guarantee absolute compliance with established signal timing and safety constraints. Evaluated in a microscopic simulation environment, outperforms state-of-the-art baselines in delay minimization. More importantly, the emergent attention weights align precisely with established traffic engineering principles, offering an auditable, trust-enabling, and deployable architecture for next-generation adaptive traffic control systems.

Traffic signal control at urban intersections inherently introduces stop-and-go behavior, resulting in increased delays and reduced traffic efficiency, especially under high traffic demand. With the emergence of connected and automated vehicles (CAVs), trajectory-level coordination has emerged as a high-potential strategy to augment or transcend conventional phase-based management. This paper proposes DSIP (Diffusion-model-based Signal-free Intersection Planner), a multi-agent motion planning framework driven by a generative diffusion process. DSIP shifts the intersection management paradigm from discrete temporal phasing to continuous multi-vehicle trajectory optimization. This work evaluates the theoretical upper-bound performance of this coordination strategy under idealized communication and execution conditions to isolate the core benefits of the diffusion-driven approach. Using the SUMO platform, we evaluate DSIP across diverse four-leg intersection configurations. Experimental results demonstrate that DSIP significantly reduces average delay and maintains higher average speed compared to both fixed-time signal control and state-of-the-art reinforcement-learning-based controllers, particularly in medium- to high-density traffic. These findings suggest that diffusion-based trajectory planning provides a scalable and robust foundation for future autonomous intersection management. By unlocking latent intersection capacity through software-defined coordination, this approach offers a cost-effective pathway to improve urban traffic flow efficiency without requiring physical infrastructure expansion.

The use of dedicated corridors for Advanced Air Mobility (AAM) traffic is one of the most commonly proposed pathways to integrating them into existing airspace operations. Most prior research has focused on the design of networks of AAM corridors and conflict resolution for aircraft within corridors. It is also generally believed that while attractive from an implementation perspective, corridor-based operations may be inefficient, especially in the absence of centralized traffic management. In this paper, we show that contrary to this belief, it is possible for autonomous aircraft to learn to self-organize into corridor flows in decentralized settings. We illustrate our approach using scenarios in which fixed-wing aircraft need to safely and efficiently traverse (1) a single corridor with metering after the exit, (2) a sequence of two consecutive corridors, and (3) a corridor that splits into two. We find that in decentralized settings with only local information, the aircraft are able to conform to the corridor boundaries more than 94% of the time and reach their goal in a relatively efficient manner. Furthermore, tactical interventions to handle violations of the separation minimum are needed only infrequently in low- and medium-density settings. However, such tactical interventions become more frequently necessary only when traffic density is high.

Urban traffic congestion remains a persistent challenge in car-dependent cities, imposing significant economic and societal costs. Traffic signal systems are increasingly deployed as networked cyber-physical components within smart-city infrastructures, where distributed sensing and edge intelligence enable adaptive traffic management. This paper investigates reinforcement learning (RL) as an edge-intelligent approach for adaptive traffic signal operation at a signalized urban intersection in Kuwait. A Proximal Policy Optimization (PPO)-based controller is developed to dynamically allocate green-phase durations using locally observed traffic states, without relying on future demand information or centralized coordination. The controller is evaluated in a realistic simulation environment informed by real-world hourly traffic volume data from Kuwait, and is compared against both conventional fixed-time control and a vehicle-actuated controller representing the current state of practice, using average vehicle delay, queue length, and emissions as performance metrics. Under nominal conditions, the proposed controller reduces average vehicle delay by 46% relative to fixed-time control and 34% relative to actuated control, while also lowering per-vehicle CO2 emissions by approximately 23%. These performance gains persist under demand perturbations of +/-15%, generalize from weekday to weekend traffic patterns, and are corroborated by a reward function ablation; low variance across five random seeds confirms their statistical reliability. These findings demonstrate the practicality of learning-based edge traffic signal control as a building block for IoT-enabled smart-city transportation systems, and as a deployable precursor toward fully connected, Internet of Vehicles (IoV)-based urban mobility.

We tackle the Metro Network Expansion Problem (MNEP), a subset of the Transport Network Design Problem (TNDP), which focuses on expanding metro systems to satisfy travel demand. Traditional methods rely on exact and heuristic approaches that require expert-defined constraints to reduce the search space. Recently, deep reinforcement learning (Deep RL) has emerged due to its effectiveness in complex sequential decision-making processes-it remains, however, computationally expensive, environmentally costly, and requires additional engineering to interpret. We show that MNEP problems are small enough to not require Deep RL methods. Reformulating the MNEP as a Non-Markovian Rewards Decision Process (NMRDP), we use tabular RL to achieve similar performance with significantly fewer training episodes, additionally offering greater interpretability. Additionally, we incorporate social equity criteria into the reward functions, focusing on efficiency and fairness, highlighting the versatility of our method. Evaluated in real-world settings-Xi'an and Amsterdam-our method reduces total episodes by a factor of 18 and total carbon emissions by a factor of 12 on average, while remaining competitive with Deep RL. This approach offers a replicable, modular, interpretable, and resource-efficient solution with potential applications to other combinatorial optimization problems.

Urban traffic signal control at IoT-instrumented intersections must remain effective under sensor occlusion, weather attenuation, and nonstationary demand. Conventional controllers degrade under these conditions, and learned policies remain difficult to audit. To address these challenges, we propose an active inference controller for a four-arm signalized intersection that dynamically selects phases by minimizing expected free energy (EFE) over Gaussian beliefs about per-direction congestion levels, yielding a fully traceable decision pipeline. We benchmark the controller in a SUMO traffic simulator against a rule-based heuristic and a deep Q-network (DQN) across four scenarios that progressively increase noise and nonstationarity, spanning sensor occlusion, adverse weather, and stochastic accidents. Across 100 independent random evaluations per scenario, active inference attains the lowest idle times and CO2 emissions in the noisiest scenarios (56,977 s and 29.12 kg vs. 71,741 s and 30.56 kg for DQN). These gains come at a modest cost in bus priority service rate and phase switch frequency.

Multi-Objective Reinforcement Learning (MORL) extends standard RL by optimizing policies with respect to multiple, often conflicting, objectives. While max-min MORL has emerged as an effective approach for promoting fairness, its applicability remains limited, particularly when constraints must be incorporated. In this paper, we propose a MORL framework that integrates the max-min criterion with explicit constraint satisfaction. We establish a theoretical foundation for the proposed framework and validate the resulting algorithm through convergence analysis and experiments in tabular settings. We further demonstrate the practical relevance of our approach in simulated building thermal control, multi-objective locomotion control, and greenhouse-gas-emission-aware traffic management. Across these domains, our method effectively balances fairness and constraint satisfaction in multi-objective decision-making.

Urban traffic congestion is a growing global issue contributing significantly to long commute times and environmental pollution. Traditional traffic signal control systems often fail to adapt to dynamic traffic conditions. Adaptive traffic signal control can improve urban traffic without changing road infrastructure. Deep Reinforcement Learning (DRL) has shown strong performance for this task, but existing delay and queue-based rewards often produce short-sighted or unstable policies. This paper proposes a Momentum-Based Reward Function (MBRF) that encourages vehicles to keep moving rather than penalizing congestion alone. The method is evaluated in SUMO (Simulation of Urban MObility) using standard traffic metrics such as waiting time, queue length, throughput, and CO2 emissions. Results show that the proposed reward produces better throughput-emission trade-offs and more stable learning behavior than delay or queue-based rewards, as well as classical controllers such as Max Pressure and LQF.

Reinforcement learning (RL) has shown promise in traffic signal control (TSC). However, its reliance on predefined states limits responsiveness to observable open-world events that are absent from training data. IoT-enabled intersections provide heterogeneous observations from roadside sensors and cameras, creating opportunities to improve RL adaptability to such events. To this end, we propose ReasonLight, a multimodal foundation model-enhanced RL framework for zero-shot TSC. ReasonLight integrates three sources of information: structured traffic measurements, multi-view camera observations, and candidate phase decisions from a pre-trained RL controller. Given an RL-proposed phase, ReasonLight extracts visual semantics from multi-view images and aligns them with compact sensor-derived scene descriptions. This alignment enables a semantic-guided refinement module to either preserve or adjust the proposed action according to traffic rules and event semantics. To ensure operational reliability, refined actions are constrained by the set of available phases. Any invalid decision is rejected, and the system falls back to the original RL action. We evaluate ReasonLight on two types of rare events not seen during RL training: emergency vehicle priority and temporary traffic regulation. Experimental results show that ReasonLight achieves zero-shot adaptation without retraining. It reduces emergency vehicle waiting time by up to 88.7% compared with the RL-only backbone while preserving comparable routine traffic performance.

Queue overflow, a severe consequence of urban traffic congestion, occurs when vehicle queues exceed intersection capacity, obstructing upstream traffic and triggering cascading gridlocks. Prevailing traffic signal control (TSC) algorithms, primarily optimized for throughput, often fail to address overflow during peak hours, exacerbating congestion and creating safety hazards. We propose OverFlowLight, a real-time framework designed to preemptively resolve overflow and enhance overall TSC performance. It first introduces a mechanism to accurately detect overflow in real-time by leveraging multi-modal sensing from cameras and radars. Upon detection, it dynamically generates and inserts dedicated overflow phases into the signal cycle to clear the blocking queues. This is orchestrated by a hybrid control design that combines rapid rule-based overflow intervention with controller back ends such as reinforcement learning (RL) for longer-horizon efficiency. We conducted extensive real-world deployments of OverFlowLight across 43 intersections in three major cities. The framework demonstrates seamless integration with existing RL-based TSC agents, highlighting its modularity and practical applicability. Empirical results show that OverFlowLight reduces overflow incidents by 60.4% and increases network throughput by 18.2% compared to deployed baselines. Furthermore, it substantially diminishes the need for manual intervention common with expert-tuned signal plans. This work presents the first practical, scalable, and data-driven framework for actively preventing traffic gridlock, offering a crucial component for building resilient and efficient urban transportation systems. Our demonstration videos, codes and datasets are available at the anonymous URL, https://anonymous.4open.science/r/OverFlowLight-FBF9.

Modern vision systems can detect, track, and forecast urban actors at scale, yet translating perception outputs to urban design remains limited. We introduce DeCoR, a two-stage reinforcement learning framework that leverages flow observations to co-optimize crosswalk layout and network-level signal control. The design stage encodes the pedestrian network as a graph and learns a generative policy that parameterizes a Gaussian mixture model over crosswalk location and width, from which new crosswalks are sampled. For each layout, a shared control policy learns adaptive signal timings to minimize joint pedestrian and vehicle delay. On a 750 m real-world urban corridor with demand sensed from video and Wi-Fi logs, DeCoR learns a layout that reduces pedestrian arrival time to their nearest crosswalk by 23% while using fewer crosswalks than existing configurations. On the control side, DeCoR reduces pedestrian and vehicle wait time by 79% and 65%, respectively, relative to fixed-time signalization. Further, the control policy generalizes to demands outside of training and is robust to layout changes without retraining.

Large language models (LLMs) show strong potential for Intelligent Transportation Systems (ITS), particularly in tasks requiring situational reasoning and multi-agent coordination. These capabilities make them well suited for cooperative driving, where rule-based approaches struggle in complex and dynamic traffic environments. Intersection management remains especially challenging due to conflicting right-of-way demands, heterogeneous vehicle priorities, and vehicle-specific kinematic constraints that must be resolved in real time. However, existing approaches typically use LLMs as auxiliary components on top of signal-based systems rather than as primary decision-makers. Signal controllers remain vehicle-agnostic, reservation-based methods lack intent awareness, and recent LLM-based systems still depend on signal infrastructure. In addition, LLM inference latency limits their use in sub-second control settings. We propose LIDSA (LLM-Based Intent-Driven Speed Advisory), a signal-free cognitive arbitration framework for autonomous intersection management. LIDSA uses an LLM to reason over declared vehicle intents, incorporating priority classes, queue pressure, and energy preferences. We evaluate LIDSA against fixed-cycle control, SCATS, AIM, and GLOSA across varying traffic loads. Results show that LIDSA reduces mean control delay by up to 89.1% and maintains Level of Service C while all non-LLM baselines degrade to Level of Service F. Under near-saturated demand, LIDSA reduces mean waiting time by 93% and peak queue length by 60.6% relative to fixed-cycle control. It also lowers fuel consumption by up to 48.8% and achieves 86.2% intent satisfaction, compared to 61.2% for the best non-LLM method. These results demonstrate that LLM-based reasoning can enable real-time, signal-free intersection management.

Urban traffic congestion presents a significant challenge for modern cities, which impacts mobility and sustainability. Traditional traffic light control systems often fail to adapt to dynamic conditions, leading to inefficiencies. This paper proposes a novel deep reinforcement learning agent for traffic light control that addresses this limitation by explicitly integrating fairness considerations for both vehicular and pedestrian traffic. Unlike prior work, our approach dynamically balances these flows based on real-time demand, moving beyond systems focused solely on vehicles. Experimental results demonstrate that our agent effectively reduces congestion while ensuring equitable service for both the categories of road users. This research contributes to a practical and adaptable solution for intelligent traffic management within the framework of smart cities, paving the way for more efficient and inclusive urban mobility.

This article outlines a new framework of traffic light optimization through a digital twin of the transport infrastructure, managed by agentic AI to ensure real-time autonomous decisions. The framework relies on physical sensors and edge computing to measure real-time traffic information and simulate traffic flow in a constantly updated digital twin. The traffic light is automatically controlled through the digital twin according to traffic congestion, travel delay and traffic patterns. This approach is implemented as a three-layer system: perception, conceptualization and action. The perception layer receives data on physical systems; the conceptualization layer uses LangChain to process the data; and the action layer links to the Model Context Protocol (MCP) and traffic management APIs to implement optimised traffic signal control algorithms. The results show that the framework minimizes waiting time at traffic lights and positively affects the effectiveness of the entire traffic flow, which is better than the fixed-time and reinforcement learning-based baselines.

Current pedestrian crossing signals operate on fixed timing without adjustment to pedestrian behavior, which can leave vulnerable road users (VRUs) such as the elderly, disabled, or distracted pedestrians stranded when the light changes. We introduce No Pedestrian Left Behind (NPLB), a real-time adaptive traffic signal system that monitors VRUs in crosswalks and automatically extends signal timing when needed. We evaluated five state-of-the-art object detection models on the BGVP dataset, with YOLOv12 achieving the highest mean Average Precision at 50% (mAP@0.5) of 0.756. NPLB integrates our fine-tuned YOLOv12 with ByteTrack multi-object tracking and an adaptive controller that extends pedestrian phases when remaining time falls below a critical threshold. Through 10,000 Monte Carlo simulations, we demonstrate that NPLB improves VRU safety by 71.4%, reducing stranding rates from 9.10% to 2.60%, while requiring signal extensions in only 12.1% of crossing cycles.

Traffic signal control is a critical task in intelligent transportation systems, yet conventional fixed-time and rule-based methods often struggle to adapt to dynamic traffic demand and provide limited decision interpretability. This study proposes an LLM-augmented traffic signal control framework that integrates LSTM-based short-term traffic state prediction, predictive phase selection, structured large language model reasoning, and safety-constrained action filtering. The LSTM module forecasts future queue length, waiting time, vehicle count, and lane occupancy based on recent intersection-level observations. A predictive controller then generates candidate signal actions, while the LLM module evaluates these actions using structured traffic-state inputs and produces congestion diagnoses, phase adjustment recommendations, and natural-language explanations. To ensure operational reliability, all LLM-generated recommendations are validated by a safety filter before execution. Simulation-based experiments in SUMO compare the proposed method with fixed-time control, rule-based control, and an LSTM-based predictive baseline under balanced demand, directional peak demand, and sudden surge scenarios. The results indicate that the proposed framework improves traffic efficiency, especially under dynamic and non-recurrent traffic conditions, while maintaining zero constraint violations after safety filtering. Overall, this study demonstrates that LLMs can enhance traffic signal control when used as constrained reasoning and decision-support modules rather than direct low-level controllers. Keywords: Intelligent Transportation Systems; Traffic Signal Control; Large Language Models; LSTM; Traffic State Prediction; Decision Support; Safety-Constrained Control; SUMO Simulation.

Large language model (LLM) agents have shown strong capabilities in long-horizon reasoning, tool use, and decision-making in digital environments, yet extending them to physically grounded systems remains challenging. Unlike web, code, or game environments, where objectives are often weakly coupled, physical systems evolve through tightly coupled dynamics in which local interventions propagate across interacting subsystems over time. Urban traffic control exemplifies this challenge, as traffic signals, freeways, public transit, and taxi systems continuously interact through shared spatial infrastructure and temporal mobility demand. Existing optimization, reinforcement learning (RL), and LLM-based approaches are largely designed for isolated subsystems, limiting coordinated reasoning and system-level optimization. We propose TrafficClaw, a LLM-based generalizable traffic control agent for physical urban systems. TrafficClaw operates within a unified traffic environment that exposes coupled urban dynamics and feedback, performs executable spatiotemporal reasoning with persistent memory for long-horizon adaptation, and leverages multi-stage agentic RL for coordinated system-level optimization. Experiments across three metropolitan regions and six traffic-control tasks demonstrate strong generalization, robustness, and cross-subsystem coordination. Our project is available at https://github.com/usail-hkust/TrafficClaw.

Connected automated vehicles (CAVs) equipped with adaptive cruise control (ACC) create new opportunities for highway congestion mitigation. Traditional practice relies on Eulerian variable speed limits (VSL) which regulate traffic through roadside signs, but suffer from infrequent updates and limited driver compliance. Recent research explored Lagrangian strategies that directly control individual vehicles, offering high reactivity and compliance, yet in realistic multi-lane settings they depend on drivers' latent lane-change intentions, making robust vehicle-level decisions difficult. Hence, we propose an Eulerian control system optimized through reinforcement learning, that (i) leverages ACC for reactivity and compliance, and (ii) obviates dependence on latent driver intentions by regulating aggregate density near bottlenecks, crucially via headway commands rather than speed commands. We evaluate two variants of our system, time-headway and distance-headway control, in large-scale simulations across a range of traffic conditions. Both variants outperform baselines, improving traffic flow by up to 10.6% over human traffic and 6.7% over traditional VSL. To strengthen evaluation, we propose a novel boundary-aware speed metric addressing a recognized flaw in simulation studies with dynamic vehicle entry and exit. The empirical results, together with our emphasis on deployable system design, suggest a path towards practical, safe, and scalable highway congestion mitigation.