Channel State Information

Classical CSI feedback in FDD massive MIMO transmits a compressed reconstruction of the channel, optimizing fidelity to the original signal regardless of the downstream task. We propose a semantic communication perspective: instead of reconstructing the channel, the UE transmits a learned \emph{semantic embedding} optimized end-to-end for beam selection at the gNB. Comparing reconstruction-oriented feedback (CsiNet) against task-aware semantic feedback across two input domains and three observation scenarios, we show that a semantic embedding of just $d=8$ real values from only 43 NR CSI-RS pilots in the angular-delay domain achieves the highest beam prediction accuracy, outperforming every method with access to the full 512-subcarrier channel. The key insight is that beam-relevant information is intrinsically low-dimensional: the semantic encoder learns to discard reconstruction-irrelevant structure and retain only a compact representation that is relevant to beam selection, realizing the core principle of semantic communication: transmit the intent, not the signal.

Wi-Fi signal data can be used to compromise the privacy of individuals. While many existing approaches rely on Channel State Information (CSI), collecting this data on typical IoT devices often requires elevated operating system permissions and specialized drivers. Consequently, this paper investigates the feasibility of utilizing Received Signal Strength Indicator (RSSI) data to predict human locations. RSSI was selected because it is accessible even on devices with limited user permissions, and therefore is more applicable to a wider array of IoT devices. To bypass the tedious process of obtaining training data needed to train an RSSI-based model, an existing Wi-Fi pose prediction project was used in this research. However, that project assumed CSI data as input. Therefore, we investigate the feasibility of cross-domain inference, i.e., feeding RSSI data into that existing CSI-based model. We collected an RSSI dataset, synchronized with video ground-truth of a person moving within a room, to evaluate the model's performance. This evaluation confirmed that RSSI data can predict locations with approximately 80% confidence when human movement is present. This demonstrates that a model trained on CSI data can be used to evaluate low-granularity RSSI data consisting of decibel-milliwatt (dBm) values to roughly locate people in the collection space. These results imply that a wide range of IoT devices can be used for privacy invasion in Wi-Fi-dense environments.

Beamforming methods in millimeter-wave (mmWave) cell-free massive multiple-input multiple-output (CFmMIMO) systems require accurate channel state information (CSI), whose acquisition entails significant training overhead. This paper shows that fully digital cell-free mmWave beamforming can be effectively learned from sub-6 GHz CSI using a graph neural network (GNN). Specifically, we represent a CFmMIMO system as a wireless graph, and the GNN is trained to approximate beamformers that maximize the downlink sum-rate based on the available sub-6 GHz CSI. A message-passing mechanism is proposed to capture inter-user interference and inter-base-station cooperation across different network topologies. Simulation results demonstrate that the proposed sub-6 GHz-assisted GNN-based beamformer achieves competitive and often superior sum-rate performance compared to classical baselines that rely on full mmWave CSI.

Beamforming plays a key role in multiple-input-multiple-output (MIMO) communication systems. However, conventional beamforming design normally requires accurate instantaneous channel state information (CSI) and iterative optimization, which incur substantial pilot overhead and computational complexity. Recognizing that radio propagation is intrinsically governed by the physical geometry, we develop a 3D Gaussian splatting for environment-aware beamforming (GSBF) pipeline based on multi-modal data, which characterizes the environment through a persistent 3D Gaussian representation. Specifically, GSBF models the environmental scattering response with reciprocity-preserving bidirectional spherical Gaussian (Bi-SG) kernels and performs two-sided electromagnetic rasterization to render an angular propagator map. The rendered map is then aggregated through an over-complete array-manifold dictionary and projected to the constant-modulus beamformers, thereby synthesizing beams directly from the access point (AP) pose and user position without online instantaneous CSI. Simulations demonstrate that GSBF consistently outperforms baselines such as exhaustive beam alignment (EBA) with lower latency.

Integrated Sensing and Communication (ISAC) combines sensing and communication to efficiently utilize wireless resources and is emerging as a key paradigm for next-generation wireless networks. By leveraging the wide bandwidth, high frequencies, and massive antenna arrays of 5G-Advanced and 6G systems, ISAC enables physical-layer sensing using Channel State Information (CSI). The 3rd Generation Partnership Project (3GPP) Release 19 identifies 32 potential ISAC use cases, with particular emphasis on detecting and tracking moving objects. In this work, we address the Sensing for Railway Intrusion Detection use case, where intruders, including wildlife, entering a railway track can pose serious collision risks. We generated 22,695 CSI matrices with corresponding ground truth using a 3D-rendered railway environment and the Sionna radio simulator. We developed a machine learning model combining a three-dimensional Convolutional Neural Network (3D CNN) and Bidirectional Long Short-Term Memory (BiLSTM) network to detect intruders in the track danger zone and estimate their real-time position relative to the train, velocity, and time to collision. On synthetic CSI data, the model achieves 99.57% intruder-detection accuracy on a balanced test set and a combined Mean Absolute Error (MAE) of 0.4240 for position, velocity, and time-to-collision prediction. These results demonstrate the potential of CSI-based ISAC sensing with machine learning for reliable railway intrusion detection. The complete codebase for CSI generation, preprocessing, and model development is publicly available at https://github.com/EdgeIntelligenceLab/6g-isac-railway-intrusion-detection.

Future integrated sensing and communication (ISAC) architectures separate the sensing entity (SE) that acquires measurements from the sensing function (SF) that performs inference, creating a need for compact, task-oriented feedback on the SE-SF interface. Forwarding the raw channel frequency response or full per-link delay-Doppler-azimuth-elevation (DDAE) tensor is prohibitively expensive, while peak-only reporting discards target-discriminative structure under clutter. We propose a learning-based coarse-to-fine sensing pipeline with candidate-latent feedback for single-target estimation. At the SE, a lightweight convolutional scorer produces a dense delay-Doppler proposal map from pilot-based OFDM channel estimates, and a learned encoder constructs K compact C-dimensional candidate tokens by fusing per-candidate azimuth-elevation patches, normalized position, and confidence cues. The latents are uniformly quantized post-training to b bits and transmitted under a finite budget B_fb = bKC + 18K + 16 bits to the SF, which performs cross-candidate refinement, reranking, and joint four-parameter estimation. On a ray-traced urban scene with static and dynamic clutter, three operating points in the (K, C, b) design space achieve 96.33-98.88% detection at 107-806 bytes per coherent processing interval, compression ratios of 1.2-9.2 x 10^4 over the 8-bit DDAE magnitude tensor, reducing the SE-SF interface from multi-Gbit/s to sub-Mbit/s rates. Cross-scene evaluation on an independent campus-scale environment achieves 98.79-99.50% detection and at-or-better angular accuracy without retraining, indicating that the learned representation captures target-relevant structure that transports across scenes of comparable or lower clutter density.

Recently, Wi-Fi sensing has played a significant role in Human Activity Recognition (HAR), as it enables the detection of various activities using only Wi-Fi signals, ensuring privacy and remaining non-intrusive for the user. However, environmental characteristics such as reflective surfaces, hardware offsets, and other physical impairments affect recognition by the neural network, subsequently causing errors and significantly reducing model accuracy. To overcome this problem we present the WiFuse framework, a dual-stream Channel State Information (CSI) framework for human activity recognition (HAR) that pairs denoised time-domain amplitude variations with 2D-FFT-derived Delay-Doppler motion representations computed from the sanitized channel phase. The fused representation feeds a hybrid ResNet-Temporal Convolutional Network (TCN) neural architecture augmented with channel and spatio-temporal attention, where the ResNet extracts spatial-spectral features and the TCN models long-range temporal dependencies; a decoupled two-stage transfer learning strategy is employed to improve optimization stability and feature reuse. We conduct extensive experiments on two public datasets, including comparisons against state-of-the-art methods and alternative hybrid architectures, ablation studies, and cross-dataset and domain-adaptation evaluations. The proposed framework reaches an overall accuracy of up to 95.28% across the four environments of the XRF55 dataset and up to 98.20% on the multi-user Wi-MIR dataset. Overall, the results indicate that combining amplitude and Delay-Doppler representations within a dual-stream strategy, enhanced by transfer learning, improves recognition performance under conditions that typically degrade deep neural networks, such as class overlap, multipath propagation, noise, and interference.

The push for broader coverage in future cellular networks depends on reliable service, yet this is increasingly harder to do as we encounter more instances of extreme weather conditions. In extreme weather conditions, we have difficulty evaluating coverage due to limited access to channel measurements. In this paper, we generate channel state information (CSI) in low and moderate weather conditions to synthesize realistic MIMO CSI under adverse weather conditions. Our primary contributions are to (1) synthesize MIMO channel datasets incorporating three weather types, each with three intensity levels, representative of practical 5G/6G scenarios; (2) train a diffusion model conditioned on weather using channel samples obtained through conventional pilot-based estimation under low and moderate weather intensities, and subsequently use it to generate channel realizations for severe weather conditions; and (3) evaluate the downlink Bit Error Rate (BER) and Outage Probability measures using the generated channels. The results show that diffusion-based generative models provide a scalable, data-driven alternative for channel modeling in harsh environments and can generalize to severe weather conditions using only low- and moderate-intensity training data.

Wireless physical neural networks (WPNNs) embed neural computation directly into analog hardware, offering lower energy consumption and latency than conventional digital implementations. In this paper, we propose a deep WPNN in which nonlinear activations are realized by a multi-hop multiple-input multiple-output (MIMO) relay network, in which each relay implements a trainable complex linear gain and bias, followed by the power amplifier's intrinsic nonlinearity acting as an activation function. The cascade of multiple relays therefore realizes an over-the-air fully connected network whose parameters can be trained end-to-end. We develop two transceiver designs for different channel state information (CSI) availability scenarios: a least squares (LS)-based scheme requiring only receiver-side CSI, and a singular-value-decomposition (SVD)-based scheme requiring both transmitter-side and receiver-side CSI. Simulation results show that the proposed architecture enables accurate over-the-air inference for image classification. In particular, the results highlight the advantage of exploiting hardware nonlinearity for enhanced inference capability.

Device-free 3D human pose estimation using commodity WiFi Channel State Information (CSI) enables privacy-preserving and illumination-robust human sensing, but its deployment is limited by poor cross-environment generalization. Unlike images, CSI measurements do not have a spatially localized correspondence to body parts and are heavily affected by multipath propagation, causing models that regress absolute poses to entangle body structure with environment-specific location cues. Within a single environment this coupling is benign: an end-to-end absolute-pose variant, RePos-D, already achieves state-of-the-art accuracy on Person-in-WiFi-3D (86.9 mm MPJPE, a 3.4% gain over the previous best WiFi method, DT-Pose). Across environments, however, the same model overfits position and suffers significant performance degradation. We therefore propose RePos, a factorized framework that separates root-relative pose estimation from root localization. By preventing absolute-pose supervision from affecting the structure branch, RePos learns environment-invariant pose representations. Specifically, it groups CSI features into body-part-aware latent tokens that skeleton-guided modeling refines into the pose, while a separate amplitude-based network estimates the root position through a differentiable spatial-decomposition module. Under the strict MM-Fi cross-environment protocol, RePos achieves MPJPEs of 254.4-296.1 mm, a 10-21% reduction over existing WiFi-based methods. The improvement remains consistent across activity protocols, leave-one-environment-out splits, and leakage-free few-shot transfer. Analysis of the learned features shows that relative-pose representations remain largely position-agnostic, while root localization retains environment dependence, indicating distinct generalization behavior for structure and localization.

WiFi sensing based on Channel State Information (CSI) promises ubiquitous, device-free perception, yet current research remains trapped in a Tower of Babel - fragmented into isolated silos where models are tailored to specific hardware dialects, fixed environments, and narrow tasks. The primary bottleneck is the Heterogeneity Gap: the disparity in signal dimensions, sampling rates, and semantic labels that prevents cross-system understanding. To bridge this gap, we propose a foundation-model framework that treats CSI not merely as raw signals but as a structured language with a learnable universal grammar. We first curate and standardize a large collection of heterogeneous real-world CSI datasets, establishing a unified infrastructure that allows incompatible signal formats to be treated as a single corpus. Second, we introduce a modular architecture that acts as a universal translator where lightweight dataset-specific adapters tokenize diverse signal inputs into a shared latent vocabulary, while a shared self-supervised Transformer backbone learns the temporal syntax of human motion and environmental dynamics. This design decouples sensing semantics from hardware syntax. Extensive evaluations show that by mastering this universal language, our approach consistently outperforms task-specific baselines and exhibits strong generalization capability in new environments, achieving superior efficiency in few-shot scenarios. By effectively absorbing heterogeneity, the framework offers a path toward robust, general-purpose wireless sensing, mirroring the linguistic generalization observed in Large Language Models. The code implementation is available at: https://github.com/cjychenjiayi/WiLLM.

Accurate and timely channel state information (CSI) is essential for next-generation wireless systems, yet existing works treat CSI compression and CSI prediction as separate problems, both in academia and in current 3GPP studies. Consequently, channel aging remains insufficiently addressed within standardized CSI feedback pipelines. In this article, we propose a unified compression-prediction framework that integrates Contrastive Predictive Coding (CPC) directly into the 3GPP-compliant CSI compression architecture. Instead of predicting high-dimensional CSI matrices, our approach forecasts future latent representations and jointly optimizes reconstruction fidelity and temporal predictive coherence via a combined 1-SGCS and InfoNCE objective. This design enables temporal representation learning without increasing feedback overhead. We present two variants: CPC-before-Compression, which performs autoregressive modeling on encoded features prior to quantization, and CPC-after-Compression, which shifts temporal modeling to the base-station to reduce the complexity of users' devices. Evaluations on 3GPP-compliant datasets from Nokia, Oppo, and CATT show that CPC-before-Compression achieves over 90% reconstruction accuracy with 32x lower decoder GFLOPs than the 3GPP baseline, while CPC-after-Compression preserves an identical encoder footprint and the same 64-bit feedback overhead. By unifying compression and prediction within a standardized pipeline, the proposed framework provides an age-aware, computationally efficient CSI feedback solution. The source code is publicly available at: https://github.com/AhmedRadwan02/cpc-3gpp

Radio frequency jamming poses a critical threat to the availability of wireless Industrial Internet of Things (IIoT) networks. Existing detection and classification techniques are poorly suited to this setting: coarse signal-strength and cross-layer features lack information richness, while raw I/Q baseband approaches require hardware and throughput that is impractical at the scale of hundred-node IIoT deployments. This paper presents CITADEL, a lightweight two-stage hierarchical pipeline that uses only Channel State Information (CSI) measurements, which are natively available on commodity IIoT devices, to detect and classify jamming attacks including previously unseen ones. While prior work has shown that jamming leaves observable CSI signatures, CITADEL is the first system to translate this insight into an end-to-end pipeline that jointly achieves closed-set classification of known attacks, open-set detection of zero-day attacks, and resistance to adversarial evasion. Evaluated across 6 known attack types and 15 zero-day scenarios, CITADEL achieves 100% known-attack detection and 97.1% zero-day detection at a 0.4% end-to-end false positive rate. Under adversarial evaluation spanning white-box and black-box threat models, gradient-based evasion remains below 2% across all tested perturbation budgets and the strongest published CSI attack generator achieves less than 5% average evasion. A systematic comparison against eight baselines confirms that no existing method achieves comparable performance on CSI data across all three axes: detection, generalization, and robustness. The full pipeline completes inference in 14.2 ms at 95.9 mJ on an edge GPU, establishing CITADEL as a practical solution for large-scale IIoT network security.

This paper considers neural channel state information (CSI) compression for time-varying massive multiple-input multiple-output (MIMO) channels in frequency division duplex (FDD) systems with limited feedback resources. The main challenge lies in obtaining a compact and efficient representation of the CSI given that it exhibits strong temporal correlation across successive snapshots. Existing memoryless compression models do not exploit this property, while simple temporal extensions often incorporate multiple observations without explicitly modeling the latent dynamics. We propose a context-aware compression framework based on a k-memory Markov variational autoencoder (k-MMVAE), which uses a finite temporal window to capture the evolution of CSI in the latent space. The model introduces Markov-structured latent dynamics with finite memory, enabling efficient use of temporal dependencies for compression. Simulation results show that the proposed approach improves target CSI reconstruction performance compared to memoryless and weakly sequential baselines, particularly at low and moderate compression rates. These results suggest that explicit latent temporal modeling can provide an effective mechanism for CSI compression under limited feedback constraints.

Ubiquitous perception through RF signals is a pivotal opportunity for future technology: it enables personalized services such as smart living, remote healthcare, automated logistics or interaction through free-space gestures. The ubiquity of Wi-Fi and cellular networks presents a promising platform for the development of innovative sensing tools. Future standards will also introduce dedicated sensing features which, for example, will allow routers to work as frequency modulated continuous wave radios targeting radar applications. Most of the current chip designs support ad-hoc firmware for CSI extraction with MIMO arrangements of the transmitter (TX) and receiver (RX) antennas and OFDM subcarriers. The CSI describes the phase shift and amplitude attenuation of multiple propagation paths on each subcarrier. The latest IEEE 802.11be standard (Wi-Fi 7) offers a wider subcarrier bandwidth of 160MHz (up to 320MHz), providing at least 120 usable pilot subcarriers for CSI or CIR estimation. Additionally, Wi-Fi signals have been recently exploited to track daily human movements and behaviors, while Wi-Fi signal variations have been shown to differ between different people and can consequently be used for their re-identification.

Wireless foundation models offer a path toward reusable channel state information (CSI) intelligence for sixth-generation (6G) systems. However, existing generic-backbone adaptation and CSI pretraining methods often treat CSI as task tensors rather than propagation-conditioned channel responses, thereby failing to capture the intrinsic time-frequency-spatial geometry of wireless environments. This paper presents a channel-adaptive roadmap toward CSI-native foundation models, proposing a unified framework that aligns pretraining, positional modeling, and attention control with three channel requirements: scale-aware heterogeneous exposure, physical time-frequency-antenna coordinates, and correlation-bounded token interaction. Extensive experiments demonstrate the superiority of the proposed framework across three dimensions: zero-shot generalization, reducing NMSE by more than 4 dB across spatial-temporal-frequency tasks; scale extrapolation, yielding up to a 5.4 dB gain under 8 times unseen antenna scaling; and inference efficiency, accelerating mobility-aware processing by up to 18.8%. A system-level evaluation with Sionna SYS further shows that the proposed framework uses only 7.01% of dense-pilot overhead, reaches -18.64 dB average NMSE, and improves average net spectral efficiency by 36.6% over dense LMMSE and 15.5% over WiFo, indicating that CSI-native representation learning can support pilot-efficient radio access.

CSI-based localization with spatially distributed antenna arrays exposes a basic resource trade-off. Each array can provide a rich view of the channel, but forwarding observations from all arrays to a fusion center is wasteful when only a few carry useful information, and the shared uplink supports only a limited number of simultaneous transmissions. We let each array decide locally whether its current observation is worth reporting, subject to a budget on the average number of active transmitters. We refer to this abstraction as Edge-Triggered Distributed Inference (ETDI). It captures a broader class of task-oriented communication problems where resource-constrained devices share an access channel for a common inference task. We instantiate ETDI for CSI-based localization, a common scenario in vehicular IoT networks. Spatially distributed remote antenna arrays (RAAs) encode local channel state information (CSI) from user equipment (UE) transmissions into latent features, and the fusion center estimates the UE position from the subset of reported features. We propose NARRAS, a decentralized reporting policy in which each RAA combines a recurrent summary of its recent observations with a memory of the last latent it transmitted. Training controls an explicit activity budget through differentiable activity penalties and validation-calibrated deterministic thresholds, and uses channel-chart regularization to shape the latent geometry. Experiments show that, at comparable uplink activity, NARRAS improves localization accuracy over learned and heuristic sparse-reporting strategies, while dense full-report models remain useful budget-free references. In low-activity regimes, chart regularization further reduces high-percentile localization errors, suggesting that geometry-aware latent representations are more robust under sparse reporting.

Human Action Recognition (HAR) using WiFi Channel State Information (CSI) has gained increasing attention due to its non-contact, low-cost, and privacy-preserving nature. However, existing learning-based approaches largely rely on deep, computationally intensive architectures to implicitly capture motion dynamics from CSI measurements, thereby increasing model complexity and reducing efficiency. Instead, we argue that incorporating appropriate inductive biases tailored to the physical characteristics of CSI signals enables more efficient and effective learning. In this work, we propose a compact temporal convolutional network (TCN)-based framework that explicitly incorporates motion-aware inductive biases into feature learning. Specifically, we introduce a Doppler-energy-guided temporal attention mechanism in feature space to emphasize motion-salient time segments, and a variance-driven channel attention module to weight informative subcarriers based on temporal motion statistics adaptively. By integrating these domain-specific priors, the proposed model effectively captures motion dynamics without increasing architectural depth. Extensive experiments on multiple benchmark datasets demonstrate that our approach achieves superior performance compared to deeper baselines, while significantly reducing parameter count and computational cost.

This letter studies CSI denoising for MIMO--OFDM with variable NR resource block (RB) allocations. ReFLEX is a length-generalizable Transformer whose frequency attention uses a relative-frequency position bias (RFPB) generated from subcarrier offsets. A single checkpoint handles unseen RB lengths and can be applied to sparse DM-RS observations in the tested RB5/RB10 PUSCH setup without retraining. In a 3GPPTR38.901 UMa NLOS channel, ReFLEX achieves about $-9.6$dB NMSE on unseen RB lengths. In NR PUSCH/UL-SCH simulations, ReFLEX denoising followed by time-frequency interpolation reduces the 10% BLER threshold by about 2--3dB.

Wi-Fi-based human activity recognition (HAR) has emerged as a promising approach for contactless sensing, leveraging channel state information (CSI) collected from wireless transceivers. While existing studies have primarily concentrated on single-user scenarios, real-world deployments often involve multi-user settings where concurrent users' movements induce overlapping CSI patterns that challenge conventional classification methods. To address this limitation, this paper introduces an attention-based multi-user activity recognition (AMAR) framework that formulates HAR as a set prediction problem. The transformer-based architecture in AMAR leverages learnable query embeddings acting as specialized activity detectors, enabling the simultaneous identification of multiple activities from composite CSI representations. Moreover, to address deployment constraints, AMAR is designed in an edge-cloud split architecture form where lightweight convolutional networks on edge devices perform initial feature extraction, followed by residual vector quantization that achieves substantial bandwidth reduction while preserving activity-discriminative information. The cloud component performs final activity prediction through attention-based set matching, enabling the system to handle varying occupancy levels. Across classroom, meeting-room, and empty-room environments, on average AMAR nearly doubles the rate of perfectly predicting all concurrent activities compared to the best baseline. Moreover, it achieves an $F_1$-score of 53.4% compared to 45.6% for the best benchmark, and reduces occupancy estimation error by 74%, while minimizing bandwidth substantially.

Channel state information (CSI) provides a widely available sensing modality for human and environment perception, but existing CSI sensing models usually rely on task-specific supervised training and require substantial labeled data for each task, device, user, or environment. This limits their scalability in practical deployments where unlabeled CSI is abundant but labeled data is costly to collect. In this paper, we present CSI-JEPA, a self-supervised predictive representation learning framework for label-efficient, multi-task Wi-Fi sensing. CSI-JEPA learns reusable temporal-spectral representations from unlabeled CSI samples by predicting latent features of masked channel regions from visible context. To better match the physical structure of CSI, CSI-JEPA tokenizes channel-response amplitude windows along the time and subcarrier dimensions. It then introduces a channel variation-aware masking strategy that samples predictive targets from regions with stronger local temporal and subcarrier-domain variations. After pretraining, the encoder is frozen and used as a backbone, with lightweight task-specific adapters added for downstream sensing tasks. We evaluate CSI-JEPA on seven real-world Wi-Fi sensing tasks spanning diverse objectives and deployment settings. The results show that CSI-JEPA improves downstream sensing performance over competitive baselines, achieving up to 10.64 percentage points mean accuracy gain over state-of-the-art supervised Transformer and matched-budget label savings of up to 98.0%.

Accurate channel state information (CSI) prediction is essential for improving the reliability and spectral efficiency of massive MIMO-OFDM systems in high-mobility scenarios. Existing deep learning methods struggle to jointly capture short-term local variations and long-range nonlinear dependencies in CSI sequences. To address this challenge, we propose ChannelKAN, a hybrid CNN-KAN channel prediction model with multi-scale frequency domain information enhancement. The key insight is that CNNs and Kolmogorov-Arnold Networks (KANs) are naturally complementary: CNNs extract intra-time-step local spatial-frequency correlations, while KANs with learnable Chebyshev polynomial activations fit inter-time-step nonlinear temporal evolution in a holistic manner. Specifically, a dual-domain expansion module first generates complementary frequency-domain and delay-domain CSI representations. A multi-scale frequency information enhancement module then retains dominant spectral components at multiple scales to strengthen key features and suppress noise. Next, a CNN-KAN feature extraction module captures local correlations via cascaded convolutions and models long-range dependencies via Chebyshev KAN layers. Finally, a dual-domain fusion module adaptively integrates features from both branches to produce the prediction. Experiments on 3GPP-compliant QuaDRiGa datasets demonstrate that ChannelKAN outperforms RNN, LSTM, GRU, CNN, and Transformer baselines in normalized mean square error (NMSE), spectral efficiency (SE), and bit error rate (BER) across various velocities and signal-to-noise ratios. Ablation studies further confirm the effectiveness of each proposed module.

Over-the-air federated learning (OTA-FL) reduces uplink latency by aggregating client updates directly over the wireless multiple-access channel. Coherent analog aggregation realizes this idea by aligning the phases and amplitudes of simultaneously transmitted waveforms, which typically requires synchronization, instantaneous channel-state information (CSI), phase compensation, and power control. Noncoherent energy detection removes the need for phase-coherent combining, but a single energy measurement is nonnegative and, therefore, cannot represent signed model updates. This paper introduces resource-element energy difference (REED), a noncoherent physical-layer primitive for continuous signed aggregation. REED maps the positive and negative parts of each real-valued update to transmit energies on paired orthogonal resource elements and estimates the signed sum by subtracting the corresponding received energies. The construction uses slow-timescale calibration of average channel powers, but does not require instantaneous transmitter- or receiver-side CSI or channel inversion. For independent Rayleigh fading, we derive exact first- and second-moment expressions for single-shot REED and for a chip-diverse extension that spreads each coordinate over multiple independently faded paired chips. The resulting variance laws separate fading-induced self-noise, signal-noise interaction, and receiver-noise fluctuation, giving an explicit diversity-resource tradeoff. More->The rest of abstract is in the paper.

Deep learning has been widely adopted for WiFi CSI-based human activity recognition (HAR) due to its ability to learn spatio-temporal features in a privacy-preserving and cost-effective manner. However, DL-based models generalize poorly across environments, a challenge amplified in multi-user settings where overlapping activities cause CSI entanglement and domain shifts. Practical deployments often limit access to labeled source data due to privacy constraints, motivating source-free adaptation using only unlabeled target-domain CSI and a pre-trained source model. In this paper, we propose MU-SHOT-Fi, a source-free unsupervised domain adaptation framework for single- and multi-user Wi-Fi sensing. MU-SHOT-Fi employs permutation-invariant set prediction with Hungarian matching during source training, followed by frozen-classifier backbone adaptation in the target domain. To enable stable adaptation without labels, we introduce occupancy-weighted information maximization that prevents model collapse by focusing diversity regularization on likely-occupied slots while excluding the dominant class from marginal entropy. Additionally, we employ binary rotation prediction as spatial self-supervision that exploits CSI frequency-time structure to learn domain-invariant features. For single-user scenarios, we introduce SU-SHOT-Fi by replacing occupancy weighting with standard information maximization and incorporating contrastive predictive coding to exploit temporal consistency. Extensive experiments on the WiMANS and Widar 3.0 datasets across cross-environment, cross-frequency, cross-orientation, and combined domain shifts demonstrate that MU-SHOT-Fi effectively recovers multi-user exact-activity classification performance under large domain shifts while maintaining accurate occupancy estimation and preventing collapse toward dominant classes.

Wireless foundation models (WFMs) have emerged as a promising paradigm for unified channel state information (CSI) acquisition across diverse tasks in sixth-generation (6G) networks. Although WFMs significantly outperform task-specific small models, their zero-shot cross-scenario generalization still remains limited for real-world applications. Existing positional embeddings, the sole interface through which self-attention perceives the temporal-frequency-antenna 3D physical coordinates of CSI, fail to capture the highly dynamic and axis-dependent coherence inherent in wireless channels. This paper proposes Adaptive 3D-RoPE, a channel-driven 3D rotary positional embedding framework for WFMs to dynamically align the 3D positional embeddings with the instantaneous coherence state of heterogeneous CSI. The design proceeds in three stages: first, an axis-wise learnable rotary prior independently preserves the temporal, frequency, and antenna coordinate structures; second, a feature-guided rotary modulation module maps the feature-wise standard deviation of visible CSI tokens to compact, sample-adaptive scales; third, identical coordinate offsets induce dynamically adjusted query-key interactions tailored to the instantaneous channel state. Extensive experiments on both simulated and measured datasets validate the effectiveness of Adaptive 3D-RoPE across three complementary dimensions. It reduces NMSE by 10.14, 6.25, and 4.61 dB relative to baselines under antenna, temporal, and frequency scaling, respectively. It transfers effectively to real-world measured CSI and remains robust under imperfect CSI. Finally, it transfers to the independently designed LWM backbone and beam-prediction task, improving zero-shot Top-1 accuracy by 8.03 percentage points.

Channel fingerprint (CF) is considered a key enabler for facilitating the acquisition of channel state information (CSI) in massive multiple-input multiple-output (MIMO) communication systems. In this work, we investigate a novel type of CF that stores statistical CSI (sCSI) at each potential location, referred to as statistical CF (sCF). Specifically, we reveal the relationship between sCSI, namely the channel spatial covariance matrix (CSCM), and the channel power angular spectrum (CPAS). Building on this foundation, we construct a unified tensor representation of the sCF and further reduce its dimension by exploiting the eigenvalue decomposition of the CSCM and its correlation with the PAS. Considering the practical constraints imposed by measurement cost, privacy, and security, we focus on three representative scenarios and uniformly formulate them as tensor restoration tasks. To this end, we propose a unified tensor-based learning architecture, termed LPWTNet. The architecture incorporates a closed-form Laplacian pyramid (LP) decomposition and reconstruction framework that replaces the traditional encoder-decoder structure, enabling efficient inference while capturing multi-scale frequency subband characteristics of the sCF. Additionally, a shared mask learning strategy is introduced to adaptively refine high-frequency sCF components through level-wise adjustments. To achieve a larger receptive field without over-parameterization, we further propose a small-kernel convolution mechanism based on the wavelet transform (WT), which decouples convolution across different frequency components of the sCF and enhances feature extraction efficiency. Extensive experiments show that the proposed approach delivers competitive reconstruction accuracy and computational efficiency across various sCF construction scenarios when compared with state-of-the-art baselines.

Accurate yet low-latency channel state information (CSI) acquisition is essential for multiple-input multiple-output (MIMO) communication systems. While advanced deep generative models, such as score-based and diffusion models, enable high-fidelity CSI reconstruction from limited pilot observations, they often suffer from high inference latency. To achieve accurate CSI estimation under stringent latency constraints, this paper proposes a null-space flow matching (FM) framework that decomposes pilot-limited MIMO channel estimation into a range-space reconstruction problem and a null-space generation problem. Specifically, the range-space component of the channel is directly recovered from noisy pilot observations, while only the ambiguous null-space component is iteratively refined using an FM-based generative prior. To further improve the robustness of the proposed framework, we introduce a power-law time schedule to better allocate the limited number of refinement steps, along with a noise-aware adaptive correction strategy to suppress channel noise on the refinement trajectory. Experimental results demonstrate that our method achieves a competitive normalized mean square error (NMSE) even under a strict latency budget of around 3 ms, while delivering superior estimation accuracy and faster inference than both model-based and generative baselines.

Device-free fall detection utilizing WiFi Channel State Information (CSI) has emerged as a promising, privacy-preserving solution for elderly health monitoring in the Internet of Things (IoT) era. However, existing deep learning approaches suffer from severe performance degradation when deployed in unseen environments due to static background overfitting and Non-Line-of-Sight (NLoS) signal attenuation. To address these critical bottlenecks, we propose a robust, domain-generalizable framework featuring a novel Attention-Enhanced CNN-Transformer hybrid architecture. First, we design a physics-driven \textbf{Dynamic Variance Gate (DVG)} to dynamically calculate local temporal variance, acting as a soft-attention mask that eliminates static environmental DC components while amplifying dynamic human motion. Second, we introduce a Physics-Aware Data Augmentation strategy to force the network to learn invariant morphological signatures rather than environment-specific noise. Furthermore, a Convolutional Block Attention Module (CBAM) is integrated to refine spatiotemporal features prior to Transformer-based sequence modeling. Extensive cross-domain evaluations across four distinct indoor environments demonstrate that our method achieves 97.6% accuracy in NLoS scenarios and 98.8% in completely unseen environments without target-domain fine-tuning. Finally, we deploy the proposed framework on an edge computing system equipped with commercial WiFi NICs. Real-world live inference field tests confirm the system's robustness against unseen environmental layouts and its capability for continuous, low-latency whole-home safety monitoring.

Wi-Fi Channel State Information (CSI) enables device-free human activity recognition, but existing multi-user approaches assume a fixed set of known users during both training and inference. This closed-set assumption limits deployment, as models trained on a specific user set degrade when applied to new individuals or environments. We reformulate multi-user activity recognition as activity counting, estimating how many users perform each activity type at a given time, without associating actions with specific individuals. We propose a pipeline that converts CSI measurements into spatial projections and extracts features using a pretrained convolutional backbone. Two formulations are evaluated on the WiMANS dataset: a conventional identity-dependent model that assigns activities to fixed user slots, and an identity-agnostic model that estimates scene-level activity composition through regression. Under standard evaluation, the identity-agnostic model achieves a mean absolute error of 0.1081 on a 0-5 count scale. Under unseen-user evaluation, the identity-dependent model's macro-F1 drops from 80.38 to 32.61, while the identity-agnostic model's counting error remains stable. Feature space analysis confirms that identity-agnostic representations are more user-invariant, which explains their stronger generalization. These results suggest that activity counting provides a more practical and generalizable alternative to identity-dependent formulations for multi-user WiFi sensing.

Existing Wi-Fi sensing systems rely on injecting high-rate probing packets to extract channel state information (CSI), leading to communication degradation and limited deployment flexibility. Although Integrated Sensing and Communication (ISAC) is a promising direction, existing solutions still rely on auxiliary packet injection because they exploit only uniform CSI from a single frame type, discarding approximately 70% of naturally available packets. We present FuseFi, a novel Wi-Fi-based ISAC framework that directly exploits irregularly sampled CSI from diverse communication packets across multiple frequency bands, eliminating intrusive packet injection and introducing no sensing-specific communication overhead. FuseFi integrates a CSI sanitization pipeline to harmonize heterogeneous packets and remove burst-induced redundancy, together with a time-aware attention model that learns directly from non-uniform CSI sequences without resampling. We further introduce CommCSI-HAR, a new dataset with irregularly sampled CSI from real-world dual-band communication traffic. Extensive evaluations on this dataset and, separately, on four public sensing tasks across three benchmark datasets show that FuseFi achieves state-of-the-art accuracy with a compact model size, while fully preserving communication throughput.