Code Generation for Robotics

Follow this topic Ask about this topic

Latest papers

20 papers9 papers in the last four weeks, against 2 the four weeks before. 0.1% of all new papers.

Oct 16, 2026

HexaShell: A Thin Harness for Exploring the Limits of VLM Agents as Robot Coding Agents

Agents built on vision language models (VLMs) now compete with learned policies on robot manipulation leaderboards. We ask how far a coding agent can go when it controls a robot instead of a computer, and where it stops. Our system, HexaShell, keeps the harness thin: it only turns the agent's commands into robot motion. The agent drives a robot with two arms through one command line. It sees three RGB cameras and knows their calibration. After each failed attempt, the agent reads the log, finds the cause, and writes or fixes small programs called tools. In this way it keeps what it learns as code, as a coding agent does when it fixes a failing test. The tools may use only what the robot observes. They use triangulation to find where objects are, relative to each other and to the gripper. If two cameras see the same point, the point lies where the two camera rays meet. If a point lies on a known plane, such as the table or the top of a block, it lies where its ray meets that plane. When the head camera is not enough, the robot moves a wrist camera to get a second view. We build the tools on only ten layouts of one seed per task, then freeze them and test them on ten new layouts of the same seed. We use Codex with GPT-6-Astra at medium reasoning effort. On all 42 RoboDojo tasks, HexaShell reaches a success rate of 39.7% and a progress score of 48.0, averaged in the same way as the leaderboard. This is a new state of the art on RoboDojo. The limit is contact, not reasoning: pushing reaches 92.5% and memory tasks 65.0%, but tight insertion only 8.3%. When the agent fails, it usually sees the failure but cannot make the motion work. We open source the tools evolved so far at https://github.com/HexaFuture/HexaShell.

Hongcheng Gao, Alex Zhou, Jay Zhu +13

Agentic AI for Robotics Code Generation for Robotics Coding Agents LLM Agent Harnesses Robot Manipulation Benchmarks

Oct 7, 2026

Adaptive Code Generation for Controlling Robots

Deploying robots as Complex Adaptive Systems (CAS) in unknown and dynamic environments necessitates a transition from rigid command libraries toward intention-based autonomy, as natural language represents the only medium capable of articulating complex goals beyond the capacity of finite instruction sets. While Large Language Models (LLMs) offer a path toward natural language goal description, their integration introduces significant challenges: the formalization gap between imprecise intentions and executable actions, the taxonomy gap induced by unpredictable environments, and the challenge of maintaining temporal state and progress awareness. This work introduces an architectural framework that enables robotic control by leveraging generative AI. The system follows a dual-AI design: an LLM translates high-level intentions into executable program code restricted to a formal robotic library and constrained by verifiable syntax, while a Vision-Language Model (VLM) provides semantic grounding via a distillation process. To ensure robustness, the framework incorporates environment-driven replanning triggers based on geometric and semantic thresholds, complemented by continuous runtime monitoring and an adaptive planning loop. Benchmarked across frontier models, our framework architecture demonstrates that grounding generative AI in a reactive, constrained loop enables robust fulfillment of complex intentions in dynamic and unknown environments.

Justus Flerlage, Thorsten Wittkopp, Alexander Acker +1

Technische Universität Berlin, Germany · logsight.ai, Berlin, Germany

Code Generation for Robotics Language Model-Based Control Language-Conditioned Robot Control Large Language Model-Based Robot Planning Code Generation

Oct 1, 2026

OpenRUA: Robot-Use Agents Are Zero-Shot Visuomotor Policies

Coding agents are extending their reach into the physical world by writing and executing robot control programs. One might expect the agents to use the existing mature software stack that engineers have developed over decades to access sensors and control motion. Yet prior work primarily engineers complex custom harnesses to orchestrate agents for robot use, particularly by prescribing specialized workflows and providing bespoke interfaces. This raises the question: "Is such additional harness engineering necessary?" We introduce OpenRUA, a zero-abstraction harness that bypasses bespoke abstraction layers by providing off-the-shelf coding agents with only terminal access to the robot's native software interface ROS 2. OpenRUA employs a minimalist workspace-as-harness design, only offering ROS 2 documentation and basic tools while leaving the coding agent to organize its own work without orchestrating any agentic workflow. Within this workspace, OpenRUA recasts perception as file I/O and manipulation as coding. With Claude Code powered by Claude Opus 5, OpenRUA achieves success rates of 99.0% on CaP-Bench and 87.0% on LIBERO-PRO, demonstrating that an off-the-shelf coding agent can serve as a zero-shot visuomotor policy through the robot's native interface, without bespoke primitives or task-specific training. Under this minimalist design, further analysis reveals striking emergent behaviors of coding agents: (1) For perception, the agent spontaneously writes programs that process raw sensory inputs and derive metric measurements in 96.80% of episodes. (2) For manipulation, the agent spontaneously builds motion-control clients (e.g., gripper control) in 95.87% of episodes and closed-loop control programs (e.g., adjusting motion based on sensor feedback) in 50.13% of episodes. Our code is available at https://github.com/terminalworld/OpenRUA.

Zhaoyang Chu, Earl T. Barr, Claire Le Goues +4

University College London · Carnegie Mellon University

Agentic AI for Robotics Zero-Shot Robotic Manipulation Coding Agents Code Generation for Robotics Robotic Control Robot Policy Learning

Sep 30, 2026

Make Code as Policy Great Again: Frontier Agents Write, Call, and Evolve Robot Tools

Frontier models can control robots, but reasoning through every reach, grasp, and retreat makes manipulation slow and token-intensive. We revisit code as policy with a different division of labor: models build executable tools, code handles multi-phase motions, and models decide what to do next. We introduce URAI (Universal Robot-Agent Interface), which couples a programming agent that constructs robot tools with an execution agent that uses them in a feedback loop. The programming agent writes reusable and task-specific tools from task intent and refines them through execution feedback and human guidance. The execution agent selects and parameterizes these tools from current observations; each call runs a complete motion locally before returning control to the agent. Unlike delegating subsequent decisions to a generated program, this design retains model-level decision-making between tool executions. Validated tool revisions persist across episodes without updating foundation-model weights, and a shared GUI and API make the same tools available to humans and agents. Across five RoboDojo tasks and four frozen execution agents, URAI raises aggregate success from 18.0% to 53.0% relative to direct fingertip control, with the largest gain on Swap Blocks; with the same tools, a program written in advance reaches only 24% against 56% for two agents deciding after each call. Three of the four agents also finish episodes 1.3-1.5 times faster with 1.5-1.7 times fewer execution-agent output tokens; DeepSeek-V4-Flash's cost barely changes. We further evaluate URAI on seven real-world AgileX dual-arm tasks, spanning object manipulation, cloth folding, and human-interactive tic-tac-toe. URAI connects the coding and decision-making capabilities of frontier agents, organizing robot control around reusable tools that agents can both invoke and revise.

Shijia Ge, Alex Zhou, Jianshu Zeng +12

Hexafuture Inc. · Peking University · Beijing Institute of Technology +1

Robotic Tool Use Tool-Using Agents Robotic Manipulation Agentic AI for Robotics Code Generation for Robotics

Sep 30, 2026

SimEX: Simulation-Integrated Robotics AutoResearch

Coding agents powered by large language models (LLMs) have shown remarkable abilities to autonomously reason about and achieve goals in the digital world. However, bringing this success to the physical world remains challenging. On the one hand, direct generation methods (e.g., Code as Policies) often suffer from the LLMs' insufficient understanding of robots and physical environments. On the other hand, iterative trial-and-error tuning in the physical world (e.g., physical autoresearch) induces significant experimental cost and safety concerns. We introduce SimEX: Simulation-Integrated Robotics AutoResearch, an autoresearch framework that tightly integrates simulated experimentation, enabling coding agents to efficiently acquire physical capabilities for controlling real robots. SimEX operates in two stages. First, the agent conducts open-ended probe-and-optimize iterations in simulation, developing a robot toolbox with robust and generalizable capabilities. Second, the agent adapts the toolbox and the simulator together through only a few physical trials: each trial corrects the simulator, and the corrected simulator is used to diagnose failures and screen candidate repairs. We evaluate SimEX extensively in sim-to-sim settings and on physical robots. On challenging real-world manipulation tasks including towel folding, barcode scanning, and plate manipulation, SimEX enables coding agents to efficiently acquire robot skills without any demonstration and with only 10 minutes of real-robot interaction. These results suggest that simulation can be a critical component in achieving physical intelligence, not only as a source of training data that must closely replicate the real world, but also as a roughly correct laboratory where a coding agent develops the knowledge and procedures needed to act on the robot. More details and robot videos at https://robo-simex.github.io/

Jiaheng Hu, Roberto Martin-Martin, Peter Stone +3

Amazon FAR (Frontier AI & Robotics) · The University of Texas at Austin · Carnegie Mellon University

Robot Skill Learning Robotics Simulation Sim-to-Real Transfer Robotic Manipulation Autonomous Experimentation Code Generation for Robotics

Sep 25, 2026

Representation-Guided Generation and Integration of Executable Programs for Robot Manipulation

Building a robotic manipulation system requires connecting perception, planning, and control through carefully designed representations and interfaces. VLM code generation offers a way to automate this construction, but independently generated components may operate on incompatible geometric and task-level information. We present Representation-guided Integration of VLM-generated Executable Task programs (RIVET), a framework for generating complete manipulation systems around a shared object-centric representation. The representation combines per-object 6D poses, which preserve the metric information required for action grounding, with a relation graph that exposes the task-level structure required for planning. Guided by this representation, a VLM generates cooperating perception, rendering, relation-inference, and planning programs, each combining task-specific computation with available packages where useful. The resulting programs are authored once for a manipulation domain and reused on unseen start and goal configurations without code regeneration. We evaluate RIVET on cube stacking, tangram rearrangement, and three-dimensional assembly in simulation and on a physical robot, where we achieve 83% overall success rate in the real world by reusing offline-generated systems. Our results demonstrate that representation-guided program generation can adapt a common manipulation framework to tasks with different geometric, relational, and sequential requirements.

Ruixiao Yang, Mingxin Yu, Chuchu Fan

Department of Aeronautics and Astronautics, Massachusetts Institute of Technology, USA

Robotic Manipulation Code Generation for Robotics Generalization in Robotic Manipulation LLM-Based Program Synthesis VLMs for Robotics

Sep 24, 2026

RAPID: Robot Agentic Programming from Demonstrations

Coding agents have demonstrated enormous success in solving complex programming problems. To leverage their potential for robot systems, this work introduces Robot Agentic Programming from Demonstrations (RAPID), which automatically generates, verifies, and refines robot programs, given a single visual human demonstration. The iterative agentic loop of code refinement requires several key ingredients: (i) a testable task specification, (ii) action primitives for robot execution, and (iii) an interactive environment for program execution and verification. RAPID infers all three from the demonstration automatically. To make the resulting program reusable beyond the demonstration setting, RAPID uses an object-centric relational program representation that focuses on the underlying structure of the demonstrated strategy rather than the specific motion per se: it expresses the action primitives as trajectory-optimization programs that realize object-level motion effects, while composing them through relational constraints that capture scene-specific geometry at run time. We evaluated RAPID in simulation on eight challenging contact-rich nonprehensile manipulation tasks as well as general prehensile manipulation tasks in the LIBERO-Pro benchmark. We also successfully deployed it on a real Franka arm and evaluated on all eight nonprehensile tasks. In all experiments, RAPID demonstrated strong performance, with generalization over object pose, shape, material, and environment. Website: https://yuyaoliu.me/projects/rapid.

Yuyao Liu, Jiayuan Mao, David Hsu +2

Massachusetts Institute of Technology · National University of Singapore · University of Pennsylvania +1

Program Synthesis Contact-Rich Robotic Manipulation Robot Learning Generalization in Robotic Manipulation Code Generation for Robotics Agentic AI for Robotics+1

Sep 24, 2026

Coding Agents for Generalized Task and Motion Planning Problems

Task and motion planning (TAMP) problems remain difficult even with full observability and object-centric states because discrete decisions are tightly coupled to geometric, kinematic, and dynamic constraints. Generalized TAMP addresses this difficulty by exploiting regularities across problem instances to reduce planning effort on new instances. However, existing methods require substantial TAMP-specific engineering. We investigate whether coding agents can automate this process by synthesizing programs that generalize across instances. Given a task description and simulator access, each agent chooses how to interact with the environment while developing a program within a fixed synthesis budget. The program is then frozen and evaluated on unseen instances. We evaluate Claude Code (Opus 5) and Codex (GPT-5.6 Sol and GPT-6 Astra) on 28 simulated environments from KinDER and PDDLStream, with object counts beyond those evaluated in the original benchmark. Across all program synthesis methods, we evaluate 980 generated programs on 100 held-out instances each, 98,000 evaluation episodes in total. Overall, we find that coding agents are surprisingly effective at generalized TAMP: all three agent configurations outperform hand-engineered planners, one-shot generation, and an LLM-based generalized planning baseline in mean success (56% to 95% versus 47% for the planners, on the 16 environments where a planner is available). As object counts grow, the agents' programs maintain higher success than the planner, using an order of magnitude less computation per instance on average. Logs show agents using interaction to calibrate physical models, test edge cases, and refine strategies. We release all code, including the full prompts given to the agents. These findings suggest that coding agents are a strong baseline for generalized TAMP.

Matteo Merler, Bowen Li, Josh Roy +4

Fondazione Bruno Kessler · Carnegie Mellon University · Princeton University +1

Coding Agents LLM-Based Program Synthesis Robot Task Planning Code Generation for Robotics

Sep 22, 2026

Generalizing Manipulation Skills with a Local Coding Agent

Today, progress in open-weight language models enables systems capable of writing, executing and debugging code while still running on a single workstation. Most language-driven robots give the model a fixed action interface or a trained policy. Generalizing to a new task therefore means more engineering effort or more data collection, both time-consuming. We investigate whether a local open-weight vision-language model can control a robot and one-shot generalize to new variations of a task without new human programming or training. We let a local open-weight VLM, Qwen3.8-27B, drive a UR3e robotic arm from a coding-agent harness. It writes and runs its own code above a service that implements kinematics, safety limits and classic computer vision techniques. We investigate if this system is capable of generalizing to unseen tasks. Specifically, we test it on nine tasks built from children's toys designed to probe generalization capability across various object characteristics: color, size, shape, and task variation of those. With five trials for each task, we observe generalization in 30 out of 45 trials with durations ranging from 3.4 to 67.5 minutes depending on task complexity. We further test if there is a speedup when an agent is asked to redo the task after successful completion. This resulted in a 50% reduction in duration, indicating that there is self-improvement over time. Finally, we expose the limitations of a local coding agent. We believe that solving those limitations combined with further investigation of self-improvement over time points at a direct path toward real-world deployment of a local coding agent.

Raman Talwar, Elias Nijs, Andreas Verleysen +1

IDLab-AIRO, Ghent University – imec, Belgium

Language Model-Based Control Coding Agents Generalization in Robotic Manipulation VLMs for Robotics Code Generation for Robotics

Sep 17, 2026

Learning and Transferring Closed-Loop Robot Software

Closed-loop robot policies require observation processing, state management, and situation-dependent branching, making them costly to design and tune manually. Although coding agents increasingly support control-code generation and optimization, it remains unclear whether implementations improved on source tasks also support policy acquisition for new tasks. We study this question by treating complete closed-loop implementations as reusable execution experience. For each source task, a coding agent generates policy code from a few successful demonstrations and iteratively improves it using simulation feedback. The validation-selected implementations are retained in a software archive. For new tasks, the agent generates and improves policies using archived implementations, target demonstrations, and execution feedback. The resulting policy is then frozen and executes without further model calls. Across four source tasks in RoboCasa, iterative optimization increases mean success from 28.3% to 64.2%. Across nine target tasks and three independent runs, mean success is 45.2% without references, 41.5% with initial source code, and 57.0% with optimized source code. Optimized references outperform initial references in all three runs on the nine-task average, with a mean gain of 15.6 percentage points. These results demonstrate the value of execution-improved software as a resource for acquiring new policies in this setting, although initial references remain better on two target tasks when averaged across runs.

So Kuroki, Yujin Tang

Sakana AI

Robot Policy Learning Robot Policy Adaptation Code Generation for Robotics Code Generation Policy Learning

Sep 16, 2026

WetRobo: A Reproducible Robot Kit for Coding Agents in Biological Laboratories

Automating biological research requires general-purpose, reproducible robot systems that allow individual wet-lab researchers to delegate robot tasks without performing teleoperation or neural-network training. Vision-language-action policies have been proposed for general-purpose arms, but can lose performance when their operating environment changes. We therefore built WetRobo, a robot kit that can readily transfer between laboratories. It consists of one robot arm, laboratory equipment (an incubator, a reagent bottle with a cap, and a Petri dish), the existing code that moves the arm, teleoperation demonstrations of each task that we recorded, and a general AGENTS.md skill file. A biological experimentalist provides natural-language tasks without collecting local teleoperation training data or training a neural network. The coding agent observes the local laboratory and writes and executes programs, using external tools as needed for adaptation. We demonstrate use of WetRobo with OpenAI Codex (gpt-5.6-sol) on three successful tasks: lifting a Petri dish lid, removing a bottle cap, and opening the incubator door, all in real-world laboratories. The coding agent achieved the cap task in both laboratories, Lab X and Lab Y, whereas a VLA fine-tuned on Lab X demonstrations succeeded there but failed to transfer to Lab Y. These results point to a practical route for laboratory robotics: instead of training a policy for each laboratory, distribute a kit and let a coding agent adapt it in each laboratory. Code, demonstrations, and the evolved programs are available at https://github.com/tsudalab/WetRobo.

Yuna Oikawa, Kei Endo, Takanori Uzawa +5

Department of Computational Biology and Medical Sciences, The University of Tokyo, Japan · RIKEN Pioneering Research Institute, Japan · New York University, USA +3

Robot Policy Adaptation Code Generation for Robotics Large Language Model-Based Robot Planning Robotics Laboratory Automation Robotic Manipulation

Aug 17, 2026

VLCP: Vision Language Control Policy Closed-Loop Code Replanning for Robot Manipulation

Turning a frontier vision-language model into a robot policy usually means fine-tuning it to emit an action representation it never saw in pretraining, which throws away much of the reasoning that made the model worth reaching for. We go the other way and keep the VLM frozen. It writes the policy as a short Python control function, with no demonstrations and no fine-tuning. Writing that code once is open-loop, though. Existing closed-loop methods react at the wrong level: they retry a fixed policy or pick a different subtask, but never rewrite the code that failed. VLCP closes the loop where the failure actually lives, on the control code, within a single episode. Every

K

steps the VLM re-observes the scene from multi-view RGB, proprioceptive state, and a state delta, then rewrites the control function from what it just saw, so a failure is caught before it compounds. We evaluate on a 57-task MuJoCo/RoboVerse sweep. This training-free policy reaches

35.1\%

pooled success, against

3.5\%

for the identical system queried once per episode. That tenfold gap holds with non-overlapping confidence intervals in every scene family. The gain traces to a

27.3\%

within-episode recovery rate on failed grasps: a miss an open-loop controller would carry to the end of the episode gets re-observed and fixed at the next replan. And the loop stays cheap. A median

84\%

of input tokens hit cache, an episode needs only about

10

compact queries, and control blocks written during any replan persist to a cross-episode skill library reused in later prompts.

Dhia Naouali, Minghan Wu, Claudia Wong +2

University of Monastir · St. Mildred’s-Lightbourn School · Cornell University +3

Code Generation for Robotics Robotic Control Robot Policy Learning Robotic Manipulation VLMs for Robotics Code Generation

Aug 14, 2026

SkillComposer: Learning Reusable Skills for Natural-Language Robot Programming

Natural-language interfaces can lower the barrier to programming robots, but existing systems struggle when users request complex tasks. While large language models (LLMs) perform well with simple commands, they often struggle to generate code for multi-step tasks, decompose high-level instructions, or reuse prior solutions. We present SkillComposer, an interactive natural-language robot programming system for simulation environments that continually learns reusable program abstractions. SkillComposer uses a generate-test architecture in which an LLM iteratively generates and revises robot programs before execution. Successful programs are stored and processed by an online library-learning algorithm that compresses recurring function sequences into reusable macro skills for future tasks. We evaluate SkillComposer through ablation experiments and a user study with 12 participants to determine its effectiveness on manipulation and robot caregiving tasks. The results show that evaluator-guided generation and learned abstractions improve success rates and usability while reducing user effort in natural-language robot programming.

John Woods, Hasti Seifi

School of Computing and Augmented Intelligence, Arizona State University, Tempe, AZ

Code Generation for Robotics Robot Skill Learning LLM-Based Program Synthesis Continual Robot Learning Language-Conditioned Robot Manipulation

Aug 13, 2026

Retrieval-grounded robot program generation and simulation-based correction via Model Context Protocol

Flexible manufacturing requires industrial robots to be reprogrammed rapidly as product variants change. This paper presents a language-model-based workflow that generates, validates, and iteratively corrects ABB RAPID robot programs from natural language task descriptions. A dual-stream retrieval-augmented generation (RAG) pipeline grounds code generation in verified technical documentation and production templates, reducing domain-specific errors produced by ungrounded language models. A custom Model Context Protocol (MCP) server connects the language-model client directly to ABB RobotStudio for automated code upload, simulation execution, and diagnostic feedback. The evaluation combines a 30-query retrieval benchmark, scoped code-generation checks, and RobotStudio case studies in a simulated pickand- place manufacturing cell. The simulation loop exposes execution failures that static and semantic checks alone cannot catch, including suction release-height errors, unreachable placement targets, and configuration-dependent recovery motions. The results show how RAG and MCP can connect grounded code generation with executable feedback from industrial robot simulation software, while reducing but not eliminating expert setup and final supervision.

Zhichao Zhou, Siyuan Chen, Omkar Salunkhe +3

Department of Mechanical Engineering, Chalmers University of Technology, Hörsalsvägen 7a, Gothenburg, SE-412 96, Sweden

Code Generation for Robotics LLM-Based Program Synthesis Industrial Robotics Retrieval-Augmented Generation

Jun 30, 2026

ASPIRE: Agentic /Skills Discovery for Robotics

Traditional robot programming is challenging: it requires orchestrating multimodal perception, managing physical contact dynamics, and handling diverse configurations and execution failures. We introduce ASPIRE (Agentic Skill Programming through Iterative Robot Exploration), a continual learning system that autonomously writes and refines robot control programs in a code-as-policy paradigm while compounding experience into a reusable skill library. ASPIRE discovers skills that persist across tasks, simulation and real-world settings, and embodiments. It operates in an open-ended loop with three components: (1) a closed-loop robot execution engine that exposes fine-grained multimodal traces, enabling autonomous failure diagnosis, repair synthesis, and validation; (2) a continually expanding skill library that distills validated fixes into reusable, transferable knowledge; and (3) evolutionary search that generates diverse task sequences and control programs to explore beyond single-trajectory refinement. ASPIRE surpasses prior methods by up to 77% on LIBERO-Pro manipulation under perturbation, 72% on Robosuite bimanual handover, and 32% on BEHAVIOR-1K long-horizon household tasks. Its accumulated library also enables zero-shot generalization to unseen long-horizon tasks: on LIBERO-Pro Long, ASPIRE achieves 31% success versus 4% for prior methods despite their use of test-time reasoning and retries. Finally, simulation-discovered skills provide initial evidence of sim-to-real transfer, substantially reducing real-robot programming effort across different embodiments and robot APIs.

Runyu Lu, Yubo Wu, Ethan Kou +11

NVIDIA · UMich · UIUC +2

Robot Policy Learning Long-Horizon Robotic Manipulation Continual Robot Learning Robot Skill Learning Multi-Task Robotic Manipulation AI Control+7

Jun 15, 2026

RHO: Your Coding Agent is Secretly a Roboticist

Code-as-Policies (CaP) has shown that large language models (LLMs) can write code to solve robotics tasks by composing perception, planning, and control primitives. Recent CaP systems, however, rely on multi-turn code-generation loops at test time, which is often infeasible for real-time robot control. We introduce Robotics Harness Optimization (RHO), a novel paradigm in which tool-enabled coding agents, at training time, propose and search for interpretable, neurosymbolic multi-file policy repositories (Repositories-as-Policies) that compose these primitives rather than a single prompt, function, or file. RHO searches with reflective feedback from environment reward and execution rather than teleoperation demonstrations. It generalizes to perturbed pick-and-place settings like LIBERO-PRO, where OpenVLA scores 0.0% and

π_{0.5}

averages 12.83%. Using the same low-level primitives, RHO reaches a 45.0% success rate, 2.5x higher than the strongest multi-turn agentic system, and 3.5x higher than

π_{0.5}

. On Robosuite, RHO sets a new state-of-the-art of 70.0%, exceeding the prior multi-turn record of 68.29% using single-turn execution with no corrective LLM code edits at deployment. When an LLM is used in the control loop, as on RAI's O3DE benchmark, RHO optimizes the deployed agent's multi-file harness of prompts, tools, and control code, improving held-out success from 23.5% to 44.3% with 20% less wall-clock time and 27% fewer tool calls.

Karim Elmaaroufi, Justin Svegliato, Sarunas Kalade +3

University of California, Berkeley · Embodied Science · AMD

LLM Agent Harnesses Robotic Manipulation Robot Policy Learning AI Coding Agents Large Language Model-Based Robot Planning Program Synthesis+4

Jun 2, 2026

ModuLoop : Low-Level Code Generation using Modular Synthesizer and Closed-Loop Debugger for Robotic Control

Large Language Models (LLMs) have demonstrated impressive performance across various domains, including code generation and problem solving. However, their application in robotic control, particularly in low-level tasks that require precise manipulation, real-time feedback, and environment-dependent execution, remains limited. To address this challenge, we propose the Closed-Loop Modular Code Synthesizer framework. This framework leverages a pre-trained LLM without any task-specific fine-tuning to perform modular code planning and generation, and iteratively executes the generated code while inserting debugging probes to observe its behavior. This closed-loop structure facilitates systematic debugging and refinement, ultimately producing executable control programs. We apply the proposed framework to the calibration of an RGB-D camera and a robotic arm, validating its effectiveness in real-world settings. Furthermore, through a subsequent pick-and-place task, we demonstrate not only the accuracy of the calibration but also the potential extensibility of the framework. Across both tasks, the framework achieved high execution accuracy and autonomy, illustrating the practicality and scalability of LLM-based robotic control using our framework.

Gina Yoon, Sumin Lee, Joo Yong Sim

Department of Mechanical Systems Engineering, Sookmyung Women’s University, Cheongpa-ro 47-gil 100, Yongsan-gu, Seoul, 04310, South Korea

Robotic Control Code Generation for Robotics Language Model-Based Control Code Generation Robotics

Apr 13, 2026

Ro-SLM: Onboard Small Language Models for Robot Task Planning and Operation Code Generation

Recent advances in large language models (LLMs) provide robots with contextual reasoning abilities to comprehend human instructions. Yet, current LLM-enabled robots typically depend on cloud-based models or high-performance computing infrastructure, which limit their deployment on robots under unreliable internet environments or with constrained computational resources, such as UAVs and small ground vehicles. Thus, deploying fine-tuned small language models (SLMs) that support onboard deployment offers a promising alternative. This paper introduces Ro-SLM, a framework that enables reliable SLM-driven robot operation by distilling LLMs' knowledge and reasoning. Ro-SLM starts from dataset synthesis by leveraging LLMs to generate diverse task instructions, produce corresponding ground truth code with minimal human assistance, and augment instructions into real-world application scenarios. Ro-SLM is then fine-tuned with the dataset, in which LLM serves as a reward function to guide the training. Extensive experiments on UAV operation tasks demonstrate that Ro-SLM improves the performance of SLM from being incapable of supporting robotic task planning and code generation to achieving performance that approaches LLM.

Wenhao Wang, Yanyan Li, Long Jiao +1

Department of Computer & Information Science, University of Massachusetts Dartmouth · Department of Computer Science & Engineering, California State University San Marcos

Code Generation for Robotics Small Language Models Code Generation Robot Task Planning

Mar 3, 2026

Act-Observe-Rewrite: Multimodal Coding Agents as In-Context Policy Learners for Robot Manipulation

Can a multimodal language model learn to manipulate physical objects by reasoning about its own failures-without gradient updates, demonstrations, or reward engineering? We argue the answer is yes, under conditions we characterise precisely. We present Act-Observe-Rewrite (AOR), a framework in which an LLM agent improves a robot manipulation policy by synthesising entirely new executable Python controller code between trials, guided by visual observations and structured episode outcomes. Unlike prior work that grounds LLMs in pre-defined skill libraries or uses code generation for one-shot plan synthesis, AOR makes the full low-level motor control implementation the unit of LLM reasoning, enabling the agent to change not just what the robot does, but how it does it. The central claim is that interpretable code as the policy representation creates a qualitatively different kind of in-context learning from opaque neural policies: the agent can diagnose systematic failures and rewrite their causes. We validate this across three robosuite manipulation tasks and report promising results, with the agent achieving high success rates without demonstrations, reward engineering, or gradient updates.

Vaishak Kumar

General Bionix, Inc.

Code Generation for Robotics Robot Policy Learning ICL for Robotics Robotic Manipulation VLMs for Robotics Code Generation

Sep 23, 2025

Robotic Ultra-Long-Horizon Manipulation Skills via Human-guided Lifelong Code Generation

Large language models (LLMs) can translate natural-language instructions for robotic manipulation into executable code, but ambiguity, noisy generations, and limited context windows make ultra-long-horizon tasks unreliable. Closed-loop approaches that rely only on LLM feedback also struggle because LLMs have limited robotic reasoning, even when task errors are obvious to humans. Feedback is often stored in representations that generalize poorly to unseen tasks and can cause catastrophic forgetting as new corrections accumulate. We propose LYRA, a human-guided lifelong skill learning and code generation framework that distills human feedback into modular, reusable skills and incrementally extends their functionality across successive interactions while preserving previously learned behavior. External memory stores learned skills and execution examples; retrieval-augmented generation selects relevant knowledge, while user hints guide reuse when retrieval is insufficient, supporting ultra-long-horizon execution. Experiments on Ravens, Franka Kitchen, LIBERO-long, MetaWorld, and real-world tasks show a 0.93 success rate, up to 27% higher than baselines, and a 42% improvement in correction efficiency. LYRA also robustly solves ``build a house'', which requires planning over 20 primitives.

Yuan Meng, Zhenguo Sun, Max Fest +4

School of Computation, Information and Technology Technical University of Munich Munich, Germany · Beijing Academy of Artificial Intelligence (BAAI) Beijing, China · The State Key Laboratory for Novel Software Technology Nanjing University Suzhou, China

Code Generation for Robotics Long-Horizon Robotic Manipulation Robot Skill Learning Robotic Manipulation Continual Robot Learning Human-in-the-Loop AI