Dexterous Manipulation

A primary bottleneck in contact-rich manipulation is the difficulty of collecting real-world data. Sim-to-real reinforcement learning offers a scalable alternative, but the simulation-reality gap prevents information-dense modalities like touch from being effectively used. Existing sim-to-real methods often mitigate this gap by simplifying tactile data into coarse low-dimensional features -- sacrificing the richness required for complex manipulation. In this work, we introduce Center-of-Pressure (CoP), an effective tactile representation grounded in physical principles that preserves dense contact information while maintaining robustness for sim-to-real transfer. To support this representation, we propose a sensor calibration scheme based on differentiable dynamics, enabling the estimation of taxel orientations without requiring ground-truth force measurements. We evaluate CoP on two blind, challenging contact-rich manipulation tasks: peg-in-hole insertion and ball balancing. Across both tasks, policies conditioned on CoP achieve zero-shot sim-to-real transfer on a multi-fingered hand, and outperform both coarse binary-contact and raw-taxel baselines. Analysis of learned policy states further suggests that CoP-conditioned policies encode task-relevant physical properties, such as object mass, as an emergent byproduct of control.

Continuum robots enable dexterous manipulation in constrained environments, but require accurate and efficient models for real-time manipulation and control. Traditional physics-based models can be computationally expensive and may suffer from inaccuracies due to unmodeled effects, while current learning-based methods often generalize poorly beyond the specific robot on which they are trained. We present a formulation of surrogate modeling for tendon-driven continuum robots as an operator learning problem that maps robot design parameters and tendon actuation inputs to resulting configurations. This formulation enables a single trained model to generalize across a large class of robot designs. We develop four novel neural operator architectures--two based on Deep Operator Networks (DeepONets) and two based on Fourier Neural Operators (FNOs)--and train them on simulation data to predict robot configurations. All architectures achieve good accuracy while allowing for fast and accurate generalization across designs. Our results demonstrate that operator learning provides an effective and generalizable surrogate for continuum robot mechanics in the design space, enabling fast modeling for control, planning, and design optimization in surgical and industrial applications.

Evaluating embodied systems on real dexterous hardware requires more than isolated primitive skills: an agent must perceive a changing tabletop scene, choose a context-appropriate action, execute it with a dexterous hand, and leave the scene usable for later decisions. We introduce DexHoldem, a real-world system-level benchmark built around Texas Hold'em dexterous manipulation with a ShadowHand. DexHoldem provides 1,470 teleoperated demonstrations across 14 Texas Hold'em manipulation primitives, a standardized physical policy benchmark, and an agentic perception benchmark that tests whether agents can recover the structured game state needed for embodied decision making. On primitive execution, $π_{0.5}$ obtains the highest task completion rate ($61.2\%$), while $π_{0.5}$ and $π_0$ tie on scene-preserving success rate ($47.5\%$). On agentic perception, Opus 4.7 obtains the best strict problem-level accuracy ($34.3\%$), while GPT 5.5 obtains the best average field-wise accuracy ($66.8\%$), exposing a gap between isolated visual sub-capabilities and complete routing-relevant state recovery. Finally, we instantiate the full embodied-agent loop in three case studies, where waiting, recovery dispatches, human-help requests, and repeated primitive execution reveal how perception and policy errors accumulate during closed-loop deployment. DexHoldem therefore evaluates dexterous tabletop execution, agentic perception, and embodied decision routing in a shared physical setting. Project page: https://dexholdem.github.io/Dexholdem/.

Vision-Language-Action (VLA) models have recently become a central direction in embodied AI, but current systems are restricted to either dual-gripper control or single-arm dexterous hand manipulation. While low-dimensional gripper control can often be handled with simpler methods, high-dimensional dexterous hand control benefits greatly from full end-to-end VLA learning. In this work, we introduce Dexora, the first open-source VLA system that natively targets dual-arm, dual-hand high-DoF manipulation. We design a hybrid teleoperation pipeline that decouples gross arm kinematics (captured with a custom exoskeleton backpack) from fine finger motion (markerless hand tracking via Apple Vision Pro), and that drives both a physical dual-arm dual-hand platform and an identical MuJoCo digital twin. Using that interface, we assemble a large training corpus: an embodiment-matched synthetic corpus (100K simulated trajectories, 6.5M frames) and a real-world dataset of 10K teleoperated episodes (2.92M frames). To mitigate noisy teleoperation demonstrations, we propose a data-quality-aware training recipe: an offline discriminator provides clip-level weights for diffusion-transformer policy training, down-weighting low-quality demonstrations. Empirically, Dexora outperforms competitive VLA baselines on both basic and dexterous benchmarks (e.g., average dexterous success 66.7% vs. 51.7%), attains 90% success on basic tasks, and shows robust out-of-distribution and cross-embodiment generalization. Ablations confirm the importance of real data and the discriminator for dexterity.

Astrobee's existing one-degree-of-freedom (DOF) underactuated compliant claw gripper enables perching on the International Space Station (ISS), but provides limited capability for continuous dexterous manipulation. More complex microgravity tasks require an end-effector that can maintain stable contact while limiting disturbance to the free-flying base, since contact forces directly couple into base motion. This article presents the integration of DexCoHand, a dexterous and compliant two-finger, 6-DOF gripper, with the Astrobee free-flying robot for microgravity manipulation. The system is evaluated in MuJoCo using Astrobee's standard handrail perching sequence, including approach, perching, and subsequent pan and tilt motions. Compared with Astrobee's existing gripper, DexCoHand preserves the commanded pan and tilt motions while reducing unintended cross-axis base motion. Hardware experiments on Earth further demonstrate DexCoHand's dexterous manipulation capabilities and its potential for more adaptable intelligent manipulation tasks.

Achieving human-level manipulation requires dexterous robotic hands capable of complex object interactions. Advancing such capabilities further demands standardized benchmarks for systematic evaluation. However, prior work does not focus on task-oriented dexterous manipulation. Existing benchmarks also often lack high quality human demonstrations and an easy-to-use evaluation pipeline. In this paper, we present DexJoCo, a benchmark and toolkit for task-oriented dexterous manipulation, comprising 11 functionally grounded tasks that evaluate tool-use, bimanual coordination, long-horizon execution, and reasoning. We develop a low-cost data collection system and collect 1.1K trajectories across these tasks, with support for domain randomization to assess robustness. We benchmark modern models under diverse settings, including visual and dynamics randomization, multi-task training, and action-head adaptation. Through extensive empirical analysis, we identify several important insights and common limitations of current policies in dexterous manipulation, highlighting key challenges for future research in dexterous hand robot learning. Code is available at: https://dexjoco.github.io

Vision-Language-Action (VLA) models are prone to compounding errors in dexterous manipulation, where high-dimensional action spaces and contact-rich dynamics amplify small policy deviations over long horizons. While Interactive Imitation Learning (IIL) can refine policies through human correction data, applying it to high-degree-of-freedom (DoF) robotic hands remains challenging due to a command mismatch between human teleoperation and policy execution at the intervention moment, which causes abrupt robot-hand configuration changes, or "gesture jumps". We present Hand-in-the-Loop (HandITL), a seamless human-in-the-loop intervention method that blends human corrective intent with autonomous policy execution to avoid gesture jumps during bimanual dexterous manipulation. Compared with taking over control using direct teleoperation, HandITL reduces intervention jitter by 99.8% and preserves robust post-intervention manipulation, reducing grasp failures by 87.5% and mean completion time by 19.1%. We validate HandITL on tasks requiring bimanual coordination, tool use, and fine-grained long-horizon manipulation. When used to collect correction data for policy refinement, HandITL yields policies that outperform those trained with standard teleoperation data by 19% on average across three long-horizon dexterous tasks.

Dexterous teleoperation via Mixed Reality (MR)-based interfaces offers a scalable paradigm for transferring human manipulation skills to dexterous robot hands. However, conventional retargeting approaches that minimize kinematic dissimilarity (e.g., joint angle or fingertip position error) often fail in contact-rich rotational manipulation, such as cap opening, key turning, and bolt screwing. This failure stems from the embodiment gap: mismatched link lengths, joint axes/limits, and fingertip geometry can cause direct pose imitation to induce tangential fingertip sliding rather than stable object rotation, resulting in screw axis drift, contact slip, and grasp instability. To address this, we propose DexTwist, a functional twist-retargeting framework for MR-based dexterous teleoperation. DexTwist detects a tripod pinch, estimates the operator's intended screw axis and twist magnitude, and applies a real-time residual joint-space refinement that tracks turning progress while regularizing the robot tripod geometry. The refinement minimizes a virtual-object objective defined by turning angle, screw axis consistency, fingertip closure, and tripod stability. Simulation and real-world experiments show that DexTwist improves turning angle tracking and screw axis stability compared with a vector-based retargeting baseline.

Dexterous manipulation is physics-intensive and highly sensitive to modeling errors and perception noise, making sim-to-real transfer prohibitively challenging. Domain randomization (DR) is commonly used to improve the robustness of learned policies for such tasks, but conventional DR randomizes one instance per episode, offering very limited exposure to the variability of real-world dynamics. To this end, we propose Domain-Randomized Instance Set (DRIS), which represents and propagates a set of randomized instances simultaneously, providing richer approximation of uncertain dynamics and enabling policies to learn actions that account for multiple possible outcomes. Supported by theoretical analysis, we show that DRIS yields more robust policies and alleviates the need for real-world fine-tuning, even with a modest number of instances (e.g., 10). We demonstrate this on a challenging reactive catching task. Unlike traditional catching setups that use end-effectors designed to mechanically stabilize the object (e.g., curved or enclosing surfaces), our system uses a flat plate that offers no passive stabilization, making the task highly sensitive to noise and requiring rapid reactive motions. The learned policies exhibit strong robustness to uncertainties and achieve reliable zero-shot sim-to-real transfer.

Learning dexterous manipulation from human-object interaction (HOI) data offers a scalable alternative to robot teleoperation, but HOI demonstrations are typically sparse and purely kinematic, making direct retargeting unreliable under embodiment mismatch and contact-rich dynamics. We present DexSynRefine, a coupled framework that treats HOI data as structured motion priors rather than executable robot actions. DexSynRefine first synthesizes hand-object trajectories conditioned on the task and initial object state using HOI Motion Manifold Flow Primitives (HOI-MMFP), a motion prior for coupled hand-object motion. It then physically grounds them with task-space residual reinforcement learning and adapts execution by inferring missing contact-dynamics context from proprioceptive history. Across five dexterous manipulation tasks, each stage addresses a complementary bottleneck: HOI-MMFP improves trajectory consistency and smoothness, task-space residuals provide the strongest grounding representation among the tested alternatives, and contact-dynamics adaptation enables robust real-world execution. Together, DexSynRefine improves real-world success rates over kinematic retargeting by 50-70~percentage points.

Sim-to-real transfer remains a critical bottleneck for deploying dexterous manipulation policies learned in simulation to real-world robots. Existing approaches rely on manually designed domain randomization or task-specific adaptation, limiting their generalizability across diverse manipulation scenarios. We present DexSim2Real, an integrated framework that leverages vision-language foundation models to bridge the sim-to-real gap for dexterous manipulation. Our system combines three components: (1) Foundation Model-Guided Domain Randomization (FM-DR), which uses a vision-language model as a visual realism critic to optimize simulation parameters via closed-loop CMA-ES, complementing text-based approaches like DrEureka with direct visual feedback; (2) a Tactile-Visual Cross-Attention Policy (TVCAP) that adapts cross-attention visuo-tactile fusion to zero-shot sim-to-real RL; and (3) a Progressive Skill Curriculum (PSC) that builds on LLM-based task decomposition with a difficulty scheduler tailored to contact-rich dexterous tasks. Extensive experiments on six challenging manipulation tasks with blinded evaluation demonstrate that DexSim2Real achieves a 78.2% average real-world success rate, outperforming DrEureka and DeXtreme while reducing the sim-to-real performance gap to only 8.3%.

Dexterous robot hands offer rich opportunities for multifunctional manipulation, where a robot must execute multiple skills in sequence while maintaining control over previously grasped objects. Most prior work in dexterous manipulation focuses on single-object, single-skill tasks. In contrast, our insight is that many sequential tasks require resource-aware grasps that conserve fingers for future actions. In this paper, we study sequential grasp-conditioned dexterous manipulation, where a robot first grasps an object and then performs a second, distinct manipulation subtask while preserving the initial grasp. We introduce HANDFUL, a learning framework that models finger usage as a limited resource and encourages exploration of resource-aware grasps through finger-level contact rewards. These grasps are subsequently selected for downstream tasks via curriculum-based policy learning. We further propose HANDFUL-Bench, a simulation benchmark that introduces sequential dexterous manipulation tasks across multiple secondsubtask objectives, including pushing, pulling, and pressing, under a shared grasp-conditioned setup. Extensive simulation results demonstrate that prioritizing resource-aware grasps improves second-subtask success and robustness compared to a baseline that greedily optimizes the initial grasp before attempting the second subtask. We additionally validate our approach on a real dexterous LEAP hand. Together, this work establishes resource-aware grasp planning as a key principle for multifunctional dexterous manipulation. Supplementary material is available on our website: https://handful-dex.github.io.

The current practice of dexterous manipulation generally relies on a single wrist-mounted view, which is often occluded and limits performance on tasks requiring multi-view perception. In this work, we present FingerViP, a learning system that utilizes a visuomotor policy with fingertip visual perception for dexterous manipulation. Specifically, we design a vision-enhanced fingertip module with an embedded miniature camera and install the modules on each finger of a multi-fingered hand. The fingertip cameras substantially improve visual perception by providing comprehensive, multi-view feedback of both the hand and its surrounding environment. Building on the integrated fingertip modules, we develop a diffusion-based whole-body visuomotor policy conditioned on a third-view camera and multi-view fingertip vision, which effectively learns complex manipulation skills directly from human demonstrations. To improve view-proprioception alignment and contact awareness, each fingertip visual feature is augmented with its corresponding camera pose encoding and per-finger joint-current encoding. We validate the effectiveness of the multi-view fingertip vision and demonstrate the robustness and adaptability of FingerViP on various challenging real-world tasks, including pressing buttons inside a confined box, retrieving sticks from an unstable support, retrieving objects behind an occluding curtain, and performing long-horizon cabinet opening and object retrieval, achieving an overall success rate of 80.8%. All hardware designs and code will be fully open-sourced.

Dexterous robotic manipulation requires perception that remains informative from pre-contact approach to contact initiation and post-contact control. We introduce FingerEye, a sensing and learning framework that strengthens robotic dexterity through continuous vision-tactile feedback throughout interaction. On the sensing side, FingerEye integrates binocular RGB cameras with a compliant contact interface to support perception both before and after contact. Before contact, the fingertip cameras provide close-range visual cues and implicit stereo for precise approach and object localization. After contact, marker-tracked deformation of the compliant ring provides a proxy for contact wrench sensing. On the learning side, we build real-and-sim infrastructure for data collection and evaluation, systematically study policy-interface designs for learning with multiple FingerEye sensors, and develop FingerEye Policy, which applies group-structured modality fusion to reduce modality shortcuts and better exploit distributed fingertip feedback. Across seven contact-sensitive task settings, FingerEye improves wrist-only policy by over 30 percentage points in mean success rate in both simulation and the real world.

In the design stage of robotic hands, it is not straightforward to quantitatively evaluate the effect of phalanx length ratios on dexterity without defining specific objects or manipulation tasks. Therefore, this study presents a framework for optimizing the phalanx length ratios of a five-finger robotic hand based on potential dexterity within a kinematic structure. The proposed method employs global manipulability, workspace volume, overlap workspace volume, and fingertip sensitivity as evaluation metrics, and identifies optimal design configurations using a weighted objective function under given constraints. The reachable workspace is discretized using a voxel-based representation, and joint motions are discretized at uniform intervals for evaluation. The optimization is performed over design sets for both the thumb and the other fingers, and design combinations that do not generate overlap workspace are excluded. The results show that each phalanx does not contribute equally to the overall dexterity, and the factors influencing each phalanx are identified. In addition, it is observed that the selection of weighting coefficients does not necessarily lead to the direct maximization of individual performance metrics, due to the non-uniform distribution of evaluation measures within the design space. The proposed framework provides a systematic approach to analyze the trade-offs among reachability, dexterity, and controllability, and can serve as a practical guideline for the kinematic design of multi-fingered robotic hands.

Tactile sensors are increasingly integrated into dexterous robotic manipulators to enhance contact perception. However, learning manipulation policies that rely on tactile sensing remains challenging, primarily due to the trade-off between fidelity and computational cost of soft-body simulations. To address this, we present ETac, a tactile simulation framework that models elastomeric soft-body interactions with both high fidelity and efficiency. ETac employs a lightweight data-driven deformation propagation model to capture soft-body contact dynamics, achieving high simulation quality and boosting efficiency that enables large-scale policy training. When serving as the simulation backend, ETac produces surface deformation estimates comparable to FEM and demonstrates applicability for modeling real tactile sensors. Then, we showcase its capability in training a blind grasping policy that leverages large-area tactile feedback to manipulate diverse objects. Running on a single RTX 4090 GPU, ETac supports reinforcement learning across 4,096 parallel environments, achieving a total throughput of 869 FPS. The resulting policy reaches an average success rate of 84.45% across four object types, underscoring ETac's potential to make tactile-based skill learning both efficient and scalable.

Dexterous robotic hands are expected to perform complex, contact-rich object manipulation, but learning such skills remains challenging because high-dimensional hands require high-fidelity demonstrations. Imitation learning provides a practical route for acquiring dexterous manipulation skills from human demonstrations, yet collecting synchronized multimodal demonstrations with accurate hand actions and tactile observations remains a key bottleneck. We present MILE, a teleoperation-based data-collection system comprising the human-first MILE exoskeleton and the mechanically corresponding MILE-Tac robotic hand. The system integrates custom-designed and fabricated modular joint encoders and compact MILE fingertip visuotactile sensor modules. The exoskeleton is informed by human-hand anatomy and ergonomic constraints, while the robotic hand is co-designed to preserve the selected four-finger kinematic topology. This correspondence enables joint-space command transfer and reduces reliance on task-space IK-based retargeting. The system synchronously records task-specific visual observations, four fingertip visuotactile streams, robot-hand proprioception, and exoskeleton-derived action commands. We evaluate MILE through a four-task teleoperation benchmark against representative glove-based and vision-based interfaces, and through imitation-learning experiments that compare policies trained with and without fingertip tactile input. The project page is available at https://sites.google.com/view/mile-system.

General embodied agents should perceive, predict, act, evaluate, and improve within a unified system. World models have shown great promise in building such agents, yet existing models typically append an action output head to a world simulator, without coupling them into a closed decision-and-learning loop for policy improvement. We present Motus2, a self-evolving general world model for dexterous manipulation. Motus2 advances world modeling through model scaling and data scaling. For model scaling, a single model with shared weights exposes three control interfaces: a policy (world-action model), a simulator (action-conditioned world model), and an evaluator (value model). The policy proposes candidate action chunks, the simulator predicts their visual consequences, and the evaluator assesses the predicted outcomes. Their coupling forms a closed decision-and-learning loop for policy improvement. This formulation uses curated expert demonstrations for action learning, while failed and suboptimal interactions provide valuable evidence for dynamics modeling and value learning. For data scaling, Motus2 progresses from large-scale monocular egocentric data to synchronized stereo egocentric data, followed by robot-domain adaptation with robot trajectories and supplementary human-robot alignment data. Motus2 further studies global-autoregressive and hybrid-memory extensions of its sliding-window context, adds tactile feedback for contact-aware control, and is instantiated on a fully biomimetic platform with stereo vision, dual arms, dual dexterous hands, and tactile sensing. Together, egocentric data scaling and closed-loop general world model scaling provide a general path toward self-evolving dexterous manipulation.