Pavement

Vehicle-mounted road cameras are vulnerable to motion blur, defocus, poor illumination, and noise, which can erase thin cracks and pothole boundaries needed by road defect detectors. This paper presents RMR-Net, a compact task-aware restoration front end that estimates degradation evidence from the image, optionally fuses it with existing corruption context/parameters, conditions lightweight restoration blocks, and returns high-frequency pavement detail through a bounded residual path. The experimental scope is deliberately controlled: the conditioning information used on the Image and Vision Computing New Zealand (IVCNZ) pothole dataset and the Road Damage Dataset: Potholes, Cracks and Manholes (PCM) consists of saved synthetic-generator parameters, not measured vehicle telemetry. A clean-trained, frozen YOLO11s detector evaluates every image source. Across eight held-out degradation conditions, RMR-Net obtains the highest mAP50 in seven, including 0.140-0.427 for IVCNZ motion blur and 0.060-0.233 for PCM defocus. A compact ablation identifies the bounded detail path as the largest local contributor, while degradation conditioning and detector-aware stability terms provide complementary guidance.

High-quality driving data are essential for autonomous-driving systems and generative world models. However, rare and safety-critical scenarios involving adverse weather, braking under low tire--road friction, and uneven road geometry are costly and risky to collect at scale. Existing video-generation and 3D Gaussian editing methods can modify weather appearance or road geometry, but typically do not couple these edits with tire--road interaction and vehicle dynamics. As a result, an edited video may retain its original trajectory even when the modified road condition should alter braking, wheel slip, load transfer, and ego-camera motion. We present muSync-GS, a physics-synchronized framework for driving video synthesis under adverse-weather and road-elevation hazards. A precipitation-derived road-surface condition jointly controls road appearance and tire friction, while a shared road-elevation profile drives both visible road-geometry editing and axle excitation. A calibrated vehicle model predicts speed, slip ratio, normal loads, and pitch for constructing the ego-camera trajectory and synchronized physical annotations. On 12 held-out CarSim cases spanning precipitation levels, brake inputs, and road-profile parameters, the model achieves mean case-wise RMSEs of 0.0273 m/s for speed, 0.0590 degrees for pitch, 0.0101 for slip ratio, and 26.61 N for per-wheel normal load. Together with the reconstructed-scene experiments, these results show that muSync-GS accurately reproduces vehicle responses under held-out controls while synchronizing them with controllable scene edits and ego-camera motion.

Road surface mapping plays a crucial role in autonomous driving, supporting high-definition map generation, lane-level perception, and automatic road annotation. Recent mesh-based road surface reconstruction methods have shown promising results, but they still suffer from limited reconstruction quality and high optimization cost, especially in large-scale driving scenarios. To address these limitations, we propose ROADGS-T, a robust and efficient large-scale road surface mapping framework based on adaptive meshgrid Gaussian representation. Specifically, we model the road surface by placing 2D Gaussian surfels on a meshgrid, where each surfel explicitly stores color, semantic, and geometric information. Compared with conventional mesh-based representations and 3D Gaussian primitives, the proposed meshgrid Gaussian representation better matches the thin-surface property of roads while significantly reducing redundant primitives and overlap during optimization. To further improve representation efficiency and structural fidelity, we introduce a road-structure-aware adaptive meshgrid strategy, which allocates denser Gaussian surfels to geometrically or semantically complex regions, such as lane markings, road boundaries, and height discontinuities, while maintaining a compact representation in flat road areas. Moreover, instead of relying on a single nearest vehicle pose, we design a trajectory-consistency-guided pose-robust refinement strategy, which estimates local surface priors from multiple neighboring poses and adaptively weights pose-guided height regularization according to their geometric consistency.

UAV-based pavement inspection can reduce the cost and risk of road-surface monitoring, but real-world deployment remains difficult when traffic, pedestrians, and temporary occlusions affect defect visibility. This paper presents a Unity-based digital twin framework for traffic-aware UAV pavement monitoring in open-traffic conditions. The proposed environment integrates procedurally generated road defects, dynamic traffic agents, autonomous UAV navigation, and a multitask YOLOv8n perception module for detecting road defects, pedestrians, and vehicles while classifying road-defect subtypes. After synthetic-domain fine-tuning, the perception model achieved 0.959 mAP@0.5 and 0.940 macro F1-score on a held-out synthetic test set generated from the simulator. The digital twin was then used to evaluate hover-and-recheck, micro-repositioning, and skip-and-revisit recovery strategies across different traffic densities and flight altitudes. Results show that flight altitude strongly affects inspection coverage, while recovery strategies introduce different trade-offs between coverage, mission duration, energy consumption, and revisit behaviour. These findings demonstrate that digital twins can support the development and evaluation of traffic-aware UAV inspection strategies before real-world deployment. The full implementation and trained models are available at https://github.com/EdwinTSalcedo/RDMO-DigitalTwin.

Unmanned ground vehicles (UGVs) operating in off-road scenarios are confronted with complex terrain disturbances that can substantially degrade path tracking performance. To address this challenge, this paper proposes a deep neural network (DNN) Koopman-based deviation compensation strategy for UGV path tracking control. Firstly, based on the vehicle dynamic function on coupled slope, an adaptive forgetting recursive least squares method with decoupled error terms is designed to estimate tire cornering stiffness. On this basis, a Laguerre model predictive control (LMPC) path tracking control strategy is designed by incorporating Laguerre functions, which can reduce computational resource usage while maintaining reliable tracking performance across different coupled slope scenarios. Then, by integrating Koopman operator theory with DNN, a DNN Koopman (DK) path deviation compensation method is proposed, which significantly improves the path tracking accuracy of UGV under potholed road disturbances. Furthermore, an event-triggered parallel cooperative (EPC) compensation mechanism that couples LMPC with DK is established based on compensation activation criteria and credibility verification. This mechanism improves path tracking accuracy on potholed road while ensuring the feasibility of overall steering command and stability of vehicle after DK compensation. Finally, a hardware-in-the-loop (HiL) experimental platform is constructed for validation. Experimental results demonstrate that the proposed UGV path tracking strategy improves tracking performance by more than 11.5% across multiple operating conditions.

Automatic-differentiation-based inverse analysis methods, including physics-informed neural networks (PINNs) and differentiable programming, have recently shown great promise due to their ability to compute accurate gradients and convergence efficiency. However, their applicability to falling weight deflectometer (FWD) backcalculation remains unexplored. This study critically evaluates PINN-based inverse analysis for a multilayer pavement system and investigates differentiable finite element method (DiffFEM) as an alternative based on a synthetic benchmark. The standard PINN does not recover layer moduli because of the sharp domain discontinuities inherent to layered pavement systems. Although we use an extended PINN with domain decomposition (XPINN), which shows better performance on discontinuous domains, its performance remains highly sensitive to loss weighting and network architecture, and degrades under measurement noise. By contrast, DiffFEM consistently achieves more accurate, stable, and computationally efficient inversion results. These results indicate that DiffFEM, which enforces the governing physics as a hard constraint, yields better accuracy, robustness, and computational efficiency than PINN-based approaches, in which the governing physics is imposed as a soft constraint through the loss function. More broadly, the findings suggest that the choice between PINN- and DiffFEM-based inverse analysis needs careful consideration, with DiffFEM offering practical advantages when an efficient and robust differentiable forward solver is available.

Knowledge of real-time road slipperiness, or even better, a refined estimate of peak grip potential, is a critical input for vehicle warning and intervention control systems. Typically, friction is estimated through dynamics-based recursive estimators by calculating the slip slope; however, its efficacy is heavily constrained by the vehicle dynamic scenario. When the vehicle is cruising and there is little to no slip, these methods become ineffective due to the inability of present-day production-grade sensors, such as wheel speed sensors, and methods to either measure or accurately estimate micro slip, which is crucial for distinguishing different surfaces. To address this challenge, the correlation between vehicle signals and road surface condition during cruising needs to be uncovered using machine learning. In this paper, a feature-based framework and an end-to-end data-driven framework are used to correlate the statistics of vehicle dynamics behavior with the condition of the road surface and perform binary classification into grip, dry or damp, and slip, snow or ice, conditions. A sliding-window approach is adopted to batch a short buffered window of wheel speeds, wheel torques, longitudinal acceleration, steering angle, and yaw rate, which are fed into a machine learning module for predicting the road state. Validation results on public-road data show scenarios where the data-driven method identifies the road surface correctly even during cruising, showing promise for accurate data-driven friction-related state estimators in the field of tire and vehicle dynamics.

Image-based 3D reconstruction offers a low-cost alternative to traditional sensor-based techniques for road surface assessment. This study compares four reconstruction pipelines--COLMAP, Meshroom, Metashape, and 3D Gaussian Splatting (3DGS)--to evaluate their ability to estimate road surface roughness from smartphone imagery. All point clouds were processed in CloudCompare using a consistent workflow involving orientation alignment, segmentation, normal estimation, and roughness computation at neighborhood radiuses of 0.2, 0.4, and 0.6 model units. The results show that COLMAP provides the highest sensitivity to micro-texture, while Meshroom yields balanced reconstructions with moderate roughness variation. Metashape produces the smoothest geometry due to its internal filtering, and 3DGS captures visible irregularities but exhibits higher noise and lower density. The comparison demonstrates that open-source pipelines are viable for relative roughness evaluation, offering a practical approach for low-cost pavement monitoring.

Automated pavement distress assessment requires more than image-level classification or coarse bounding box detection, demanding precise localization of thin, branching, and irregular cracks to achieve the geometric precision necessary for maintenance-relevant quantification. This paper presents a vision-based pavement distress analysis system based on Mask R-CNN instance segmentation and evaluates it on UWGB-StreetCrack, a custom field-collected roadway image dataset acquired with a vehicle-mounted smartphone and manually annotated with polygon labels for longitudinal cracks, transverse cracks, alligator cracks, and potholes. Five Detectron2-based Mask R-CNN backbone variants were considered under a consistent fine-tuning protocol. The best-performing model, Mask R-CNN with a ResNet-101 FPN backbone, achieved 84.23% precision, 90.04% recall, and an F1 score of 87.04% under the project-specific bounding-box matching protocol. The same model produced an aggregate predicted crack-area fraction of 2.164%, closely matching the 2.170% ground-truth crack-area fraction. To contextualize the segmentation system against a detector-oriented alternative, a CSPDarknet53-based YOLO detector was also adapted and retrained on the dataset, reaching 27.5% precision and 20.7% recall on the validation protocol. The results show that instance segmentation is a practical direction for field pavement imagery and aggregate crack-area estimation, while also exposing open challenges in annotation consistency, class imbalance, confounder rejection, and mask-level benchmarking.

Recent attempts to support high-level scene interpretation and planning in Autonomous Vehicles (AVs) using ensembles of Large Language Models (LLMs) and Large Multimodal Models (LMMs) continue to treat time as a secondary property. This lack of temporal grounding leads to inconsistencies in reasoning about continuous actions, undermining both safety and interpretability. This work explores whether temporal conditioning within inter-agent communication can preserve or enhance coherence without introducing degradation in semantic or logical consistency. To investigate this, we introduce three planner architectures with progressively increasing temporal integration and evaluate them on curated subsets of the BDD-X dataset using semantic, syntactic, and logical metrics. Results show that while temporal conditioning reshapes reasoning style, it yields no statistically significant improvements in standard NLP-based correctness metrics. However, qualitative analysis reveals predictive hazard reasoning, stable corrective behavior, and strategic divergence in the Sentinel. These findings clarify the limits of prompt-based temporal grounding and establish the first empirical benchmark for temporal scene-to-plan reasoning.

Sharpness-aware minimization (SAM) encourages flat minima by perturbing parameters along directions of high loss curvature, but treats all parameter directions uniformly, ignoring the underlying loss geometry. We introduce LLQR+SAM, which combines SAM with a learned preconditioner obtained from the recently proposed LLQR framework, a second-order method that recasts steepest descent as a layerwise linear-quadratic regulator problem. The preconditioner is updated sparsely and maintained as a slow exponential moving average, so it captures a smoothed, low-resolution picture of the loss landscape geometry. The SAM perturbation then operates on top of this learned geometry, probing curvature at a faster timescale. We show that this two-timescale structure is not merely a computational convenience: theoretically, the preconditioner amplifies the SAM escape signal in directions that are flat under the average geometry but locally sharp (potholes). Wide, flat basins, by contrast, remain stable. Empirically, LLQR+SAM gives consistent gains over both SAM and LLQR alone across standard vision and sequence modeling benchmarks, supporting the view that slow learned geometry and fast sharpness correction are genuinely complementary.

Autonomous driving must operate across diverse surfaces to enable safe mobility. However, most driving datasets are captured on well-paved flat roads. Moreover, recent driving datasets primarily provide sparse LiDAR ground truth for images, which is insufficient for assessing fine-grained geometry in depth estimation and completion. To address these gaps, we introduce CARD, a multi-modal driving dataset that delivers quasi-dense 3D ground truth across continuous sequences rich in speed bumps, potholes, irregular surfaces and off-road segments. Our sensor suite includes synchronized global-shutter stereo cameras, front and rear LiDARs, 6-DoF poses from LiDAR-inertial odometry, per-wheel motion traces, and full calibration. Notably, our multi-LiDAR fusion yields ~500K valid depth pixels per frame, about 6.5x more than KITTI Depth Completion and 10x more on average than other public driving datasets. The dataset spans ~110 km and 4.7 hours across Germany and Italy. In addition, CARD provides 2D bounding boxes targeting road-topography irregularities, enabling accurate benchmarking for both geometry and perception tasks. Furthermore, we establish a standardized evaluation protocol for road surface irregularities on CARD and benchmark state-of-the-art depth estimation models to provide strong baselines. The CARD dataset is hosted on https://huggingface.co/CARD-Data.

Nationwide road-incident forecasting is a systems problem before it is a modeling problem. A usable service must connect historical incident archives, historicalandliveweather,nationalroadgeometry, offline model training, tile generation, web serving and runtime handoff. This paper presents Road Risk Monitor, a U.S.-wide road-safety stack that combines a nationwide H3 baseline trained on FARS fatal-crash data with a road-segment forecasting pipeline trained from TIGER/Line geometry and US-Accidents events, then serves predictions through live APIs, raster tiles, JSON road tiles, and a public web application.

The deterioration of pavement is a complex and dynamic process determined by different factors including material, environment, design, and some other unobserved variables. Accurate predictions of pavement condition can help maximize the use of available resources for pavement management agencies through better coordinated preservation and maintenance activities. This paper uses deep neural networks such as the convolutional neural network (CNN) and the long short-term memory (LSTM) to model the pavement deterioration process. In this paper, pavement condition data and maintenance and rehabilitation history collected by the Texas Department of Transportation over the past 18 years were used. Twenty-one flexible pavement condition indicators, including cracking, rutting, raveling, and roughness, collected from more than 100,000 pavement sections were included in the proposed models. Promising preliminary results were obtained. Case study results show that the proposed CNN model outperforms standard machine learning models in predicting pavement condition values.

Radar offers unique advantages for localization in unstructured environments, including robustness to weather, lighting, and airborne particulates. While most prior work has studied radar odometry in urban, largely planar settings, its performance in off-road environments remains less understood. In this paper, we investigate the potential of radar for off-road odometry estimation and identify key challenges that arise from full $SE(3)$ vehicle motion, terrain-induced ground returns, and sparse or unstable features. To address these issues, we introduce two simple baselines: Radar-KISSICP, which applies motion compensation to generate 3D-aware radar pointclouds, and Radar-IMU, which leverages IMU preintegration to stabilize scan matching. Experiments on the Great Outdoors (GO) dataset demonstrate that these baselines improve trajectory estimation in challenging routes and provide a reference point for future development of radar odometry in off-road robotics.

In this paper, we report the world's first infrastructure-guided communication-enhanced road crack detection pipeline that is effective and implementable on passenger vehicles. We first design a customized communication protocol to transmit the region of interest from the infrastructure to the vehicle. With proper camera image processing (e.g., dynamic cropping and frame selection), the focused images are provided to the crack detection model. Leveraging state-of-the-art crack detection model backbones and a carefully prepared dataset comprising a forward-facing view with a crack, we train the model to improve crack-detection performance. We demonstrate the full detection pipeline on an experimental vehicle platform, showcase the detection effectiveness, and project future research directions.

The Boreas Road Trip (Boreas-RT) dataset extends the multi-season Boreas dataset to new and diverse locations that pose challenges for modern autonomous driving algorithms. Boreas-RT comprises 60 sequences collected over 9 real-world routes, totalling 643 km of driving. Each route is traversed multiple times, enabling evaluation in identical environments under varying traffic and, in some cases, weather conditions. The data collection platform includes a 5MP FLIR Blackfly S camera, a 360 degree Navtech RAS6 Doppler-enabled spinning radar, a 128-channel 360 degree Velodyne Alpha Prime lidar, an Aeva Aeries II FMCW Doppler-enabled lidar, a Silicon Sensing DMU41 inertial measurement unit, and a Dynapar wheel encoder. Centimetre-level ground truth is provided via post-processed Applanix POS LV GNSS-INS data. The dataset includes precise extrinsic and intrinsic calibrations, a publicly available development kit, and a live leaderboard for odometry and metric localization. Benchmark results show that many state-of-the-art odometry and localization algorithms overfit to simple driving environments and degrade significantly on the more challenging Boreas-RT routes. Boreas-RT provides a unified dataset for evaluating multi-modal algorithms across diverse road conditions. The dataset, leaderboard, and development kit are available at www.boreas.utias.utoronto.ca.