Electric Vehicles

The increasing adoption of electric vehicles (EVs) is expected to place significant additional demand on residential distribution networks, creating a need for realistic charging datasets for planning and simulation studies. However, access to real-world EV charging data is often limited due to privacy constraints, incomplete records, and restricted availability. This paper proposes a conditional variational autoencoder (CVAE) for the generation of synthetic EV charging sessions from real transaction-level charging data. The model is trained on engineered session features describing plug-in duration, charging duration, delivered energy, charging delay, and cyclical time-of-week, while conditioning on day of week and managed charging status. A Gaussian negative log-likelihood (NLL) reconstruction loss is employed to model feature-wise heteroscedastic uncertainty, and the latent space is regularised using a Kullback-Leibler (KL) divergence term. The statistical fidelity of the generated data is evaluated using distributional metrics and downstream task performance through the Train-on-Synthetic-Test-on-Real (TSTR) protocol. Results demonstrate that the proposed approach produces synthetic EV charging sessions that preserve key statistical properties of the original dataset while supporting predictive modelling tasks.

Many learned sequential decision systems map the current state directly to an action. That shortcut becomes brittle when candidate actions are numerous, geometrically structured, and rebuilt with the state. One-to-many mobile charging makes this setting concrete: with N=250 sensors, the initial state induces about 1,125 candidate charging-stop actions; each chosen stop simultaneously serves its in-range sensors, and the action universe changes as sensors die. LP-BTS is a learning-guided planning architecture: a graph proposal policy concentrates a small candidate support, a learned value critic evaluates leaves, and edge-budgeted PUCT compares short simulated futures before committing an action. Because the policy scores this set without a fixed output head, a single frozen checkpoint covers every evaluated setting, spanning action universes from 736 to 2,813 stops. Matched ablations reveal complementary effects: uniform sampling costs 8.8 survival percentage points, while, with targeted support fixed, PUCT jointly retains 1.4 points (about 3.5 of 250 sensors) and direct policy selection travels 23% farther. On a prospectively specified, sealed 30-scenario confirmatory bank evaluated once, LP-BTS attains the highest observed survival (0.4545) and alive-AUC (0.8031). Its estimated survival advantage over the strongest domain-engineered comparator is +0.0066 (95% CI [-0.0037, +0.0184]), an unresolved difference, while it exceeds a deadline heuristic and two source-derived direct-policy reconstructions on every paired scenario. Both learned rows are trained, source-derived reconstructions of variants reported by Gong et al. In this setting, the results provide controlled evidence about learning-guided planning in a large, dynamic action space.

Renewable energy systems and electrified transport have found widespread adoption in recent years. The integration of these non-linear loads, dominated by electric vehicle (EV) charging, however, has introduced severe harmonic distortion into the power grid, impacting the efficiency and lifetime of substation equipment and switchgear in the distribution network. Rapid and high-precision harmonic analysis has hence become a prerequisite for effective harmonic control at the source of injection. This paper proposes an Efficient Broad Learning (EBL) framework for distributed adaptive harmonic estimation. As a quantised FPGA acceleration framework for BLS-style harmonic estimation, it offers high-accuracy estimation with half-cycle input, reconfigurable flexibility enabled by the FPGA implementation, and ultra-low latency, achieving 17.4 $\times$ faster predictions than the nearest reported FPGA method. For harmonic prediction across multi-scenario charging and discharging nodes, the online transfer learning based on a closed-form solution rather than backpropagation in EBL demonstrates rapid adaptability. By exploiting bespoke quantisation and sparsity, the approach consumes 5.9% of the LUTs on the Zynq Ultrascale+ ZU7EV FPGA, using $\approx$ 82% of the LUTs required by the state-of-the-art FPGA-accelerated estimator.

In electric delivery fleets, mid-shift charging is non-trivial: each vehicle must decide when, where and how much to charge to finish on time with battery above a safety floor. The choices are coupled: queues build where too many vehicles pick the same station. Prior work resolves this coupling with central dispatching, precomputed schedules or reservations, machinery that charging infrastructure rarely supports. Instead, we use a family of learning agents under purely local control: every vehicle runs the same policy, deciding alone from its time budgets and broadcast station occupancies, leading to emergent coordination without central control or messaging. We validate this paradigm in simulation on real OpenStreetMap networks of twenty cities, each with a frozen scenario calibrated by an omniscient Oracle (99.5% of shifts completed on time), whereas a naive greedy rule (nearest station on low battery) completes just 73%. Agents trained with neuroevolution (NEAT) and policy gradients (PPO) on four cities and deployed zero-shot across all twenty, sixteen never seen in training, complete 96.8% and 98.6% of shifts, with the policy-gradient controllers proving more robust when demand or vehicle characteristics drift beyond the trained regime. In contrast, tuned threshold heuristics that read vehicle urgency alone fall short in contended cities (~80%). Through training, these learning agents rediscover partial charging and short opportunistic sessions, and route around busy stations, cutting per-session queue waits from about 45 minutes to under 2. In summary, this coordination paradigm balances local urgency against public occupancy, reaching near-Oracle performance at minimal implementation cost.

Cyberattack detection in electric vehicle charging infrastructure is complicated by legitimate post-activation revisions to requested energy and departure time. Charging manipulation attacks can exploit the same interface and variables; therefore, detecting a request change alone does not establish malicious intent. This paper develops a leakage-controlled session-level benchmark that preserves the ordered inputs of real Adaptive Charging Network (ACN) sessions and models legitimate revisions as normal behavior. A fixed pool keeps each generated attack in its source session's split and contains six physically motivated attacks and their coordinated variants. We compare 22 profile-only, transition-aware, and context-stratified model families under common source-grouped folds, attack data, and operating constraints. The proposed Dual-Branch Masked-Autoencoder (Masked-AE) Transition Boost model evaluates whether the current request is normal and whether its producing transition resembles an observed benign update. Its state branch combines masked reconstruction with a radial-basis-function one-class support boundary, while its transition branch combines masked reconstruction with shrinkage covariance distance. Source-grouped five-fold cross-validation selects complete configurations under explicit overall-normal and benign-update acceptance constraints; disjoint normal data then calibrate the final threshold before one test evaluation. The developed dual-branch model provides the strongest robust validation performance while detecting malicious request manipulations without learning to reject legitimate user choices.

Electric Vehicle Charging Systems (EVCSs) are increasingly connected with Internet of Things (IoT) devices, which improves charging intelligence but also expands their exposure to cyber-attacks. Intrusion Detection Systems (IDSs) are essential for securing EV charging networks; however, conventional Machine Learning (ML)-based IDSs often rely on manual model design and mainly optimize detection performance without fully considering inference latency and model size. In this paper, a Multi-Objective Automated ML (MOO-AutoML)-based efficient IDS is proposed for EVCS security. The proposed framework uses a lightweight training strategy and a LightGBM-based automated feature selection method to select compact feature subsets based on accumulated feature importance. Then, Non-dominated Sorting Genetic Algorithm III (NSGA-III) jointly optimizes the feature selection threshold and key LightGBM hyperparameters under three objectives: maximizing weighted F1-score, minimizing 99th percentile inference latency ratio, and minimizing model size ratio. Experiments on CICEVSE2024 and CICIDS2017 show that the proposed MOO-AutoML IDS achieves competitive weighted F1-scores, lower P99 inference latency, and smaller model sizes than the compared methods. Overall, the results indicate that the proposed method can support accurate and efficient intrusion detection for EVCS and IoT security under practical deployment constraints.

Agriculture 4.0 robotic systems improve field efficiency yet remain too capital-intensive for the fragmented smallholdings that dominate global agriculture. Meanwhile, a growing number of retired low-speed electric-vehicle (LSEV) powertrains retain functional electromechanical value but are destructively recycled. This paper presents TS-MAMP (Telescopic-Sleeve Modular Agricultural Mobile Platform), a remanufactured robot built under 3R (reduce, reuse, recycle) circular-economy principles. Retired 48 V brushless-DC (BLDC) hub motors are paired via back-EMF matching, and lead-acid battery modules screened at 60%-80% state of health are actively balanced within a 100 mV inter-module voltage deviation. Together, these reused components reduce the powertrain-and-chassis BOM cost by approximately 60%, to below USD 450 (perception and weeding modules excluded). The truss chassis provides at least 200 kg static load, continuously adjustable track width from 1200 mm to 2000 mm, and no more than 5-minute module changeover. An NMS-free (non-maximum-suppression-free) YOLOv10n detector with consistent dual-assignment training and negative-sample learning achieves 80.87% mean average precision (mAP)@0.5 (58.41% mAP@0.5:0.95) on the Wanxi Crop-Weed dataset, and is deployed via FP16 TensorRT on a Jetson Nano, confirming on-device inference feasibility. TS-MAMP demonstrates that retired EV components, under modest screening, can be re-engineered into affordable, AI-enabled agricultural robots--opening a remanufacturing pathway for the smallholder fields that commercial automation leaves unserved.

Safety interventions for large populations of network-coupled agents must protect shared constraints without unnecessarily overriding task-oriented policy decisions. We present HetGPS, a hybrid graph-control framework synergizing learned graph risk with physics-anchored correction by separating intervention magnitude from corrective direction. An action-conditioned graph residual model schedules state-dependent intervention authority, while a physics model determines its direction. For electric vehicle (EV) charging, we couple this filter with a parameter-shared heterogeneous graph soft actor-critic policy, enabling topology-aware coordination with a learned model size independent of fleet size. Across five nested distribution networks with 200--3,218 EVs and 100 evaluation days, Adaptive Authority reduces bus--step voltage violations from 3.93--7.74% without filtering to 0.52--3.44%, while maintaining 99.06--100% departure success. Relative to the same physics-directed projection with fixed authority, it improves mean reward on all five networks and lowers the mean safety score on four. The deployed policy-and-risk model contains 383,702 learned parameters at every scale; at 3,218 EVs, a matched centralized SAC actor is about $170\times$ larger. A policy trained on the eight-transformer system transfers zero-shot to the 16- and 32-transformer systems, attaining 0.57--0.75% violation rates and at least 99.99% departure success. These results show that learned graph risk can allocate intervention authority at scale while feeder physics anchors corrective action.

Line-haul trucking costs are dominated by three comparably sized components: energy, driver labor, and equipment. Most efficiency technologies address only one component at a time. This paper presents Robostreet Flow, a freight architecture that jointly optimizes the vehicle, convoy formation, and operating model to minimize cost per ton-mile on high-volume point-to-point corridors. The Flow platform is a battery-electric 6x4 tractor with a teardrop single-seat cab and a drag coefficient of 0.35, approximately 40% below that of conventional Class 8 tractors. A carbon-composite monocoque and structurally integrated batteries reduce net vehicle weight by 50%. A 513 kWh tractor battery and a 340 kWh powered trailer battery provide a 500-mile single-charge range. Four Flow trucks operate as a coordinated convoy with a safety driver only in the lead vehicle, while three followers operate in SAE Level 4 automated mode. Computational fluid dynamics simulations show that close following at an 8 m gap reduces follower drag coefficients by 42-48% and follower peak frontal pressure by approximately a factor of four relative to the exposed lead vehicle. A longitudinal energy model calibrated to these results predicts fleet-average consumption of 1.27 kWh/mi in convoy, compared with 1.60 kWh/mi for an isolated vehicle, for a 20.5% energy saving. Electricity cost is approximately 17% of the equivalent diesel fuel cost. Amortizing one driver across four trucks and accounting for the additional payload enabled by lightweighting reduce operating cost from 9.4 to 4.1 cents per ton-mile, a 56% reduction relative to a diesel baseline. Sensitivity analysis, a hub-to-hub operating concept, and regulatory implications are also presented.

Reliable electric vehicle (EV) charging infrastructure is a cornerstone of sustainable, low-carbon cities, yet urban climate stress such as extreme heat, heavy precipitation, and humidity increasingly raises equipment fault risk and undermines the resilience of urban energy and mobility services. Shifting operation from reactive repair to preventive maintenance depends on accurate, forward-looking fault-risk prediction, a task complicated by the heterogeneous time scales of physical, behavioral, contextual, and historical signals and by forecasting over a multi-week horizon. We develop FGDSE, a feature-governed dynamic stacking ensemble that forms an interpretable decision-support system for climate-resilient charging-asset management. It partitions heterogeneous signals into four feature families, assigns each to a domain expert whose inductive bias matches the data, and adds two deep temporal experts for short-term pulses and long-term degradation; a horizon-wise gating mechanism then learns adaptive weights to forecast daily fault risk over 1 to 30 days. SHAP attribution and an X-learner extend the probabilistic output into causal decision support with post-level treatment effects. On 25 months of data from 13 stations, FGDSE surpasses twelve baselines beyond the ten-day horizon, sustains about 85% macro-recall at 30 days with an AUC decay of only 3.2 points, and reveals a shift of dominance from fault history toward climate stress. It identifies extreme heat as the sole exposure whose causal effect amplifies over time, flagging roughly 30% of posts as heat-sensitive and yielding quantitative thresholds for climate-adaptive maintenance that strengthens urban mobility resilience and sustains low-carbon travel.

In this work, we incorporate first principle physics into the construction of data-driven methods by considering a model that accounts for the different sources of energy losses during vehicle operations. Our results show that Bayesian linear regression based on this physics-aware model can improve the reliability of the expected energy consumption, as compared with standard linear regression. Further, it is shown that more complex machine learning models such as neural networks and gradient boosted regression trees, based on the same physical model, can further improve the accuracy in energy forecasting and significantly outperform standard versions of the same machine learning models. In addition to point predictions of the energy consumption, we develop a framework for estimating the corresponding uncertainty in the form of predicted standard deviation. Our results show that all of the models learn to estimate the uncertainty reasonably well.

The deployment of reliable lithium-ion battery management systems is crucial for accelerating electrification, yet the joint prognosis of State of Health (SOH) and Remaining Useful Life (RUL) remains severely hindered by task heteroscedasticity. Conventional multi-task learning frameworks fail to balance the bounded, low-variance noise of SOH estimation with the unbounded, nonlinearly expanding uncertainty of long-term RUL predictions. Here, we present the Rotary SOH-Injected Prior Battery Transformer (RoSIP-Batt), a unified co-estimation framework that resolves these optimization conflicts. By formulating joint prediction as a Bayesian multi-task objective, RoSIP-Batt introduces a homoscedastic uncertainty weighting mechanism to dynamically scale task-specific gradients based on learned residual noise levels. The architecture leverages decoupled dual classification tokens and a per-dimension gated fusion mechanism, secured by a gradient-detachment operator to prevent high-variance RUL updates from corrupting the stable SOH representation space. To capture electrochemical degradation patterns without relying on absolute cycle steps, Rotary Position Embedding (RoPE) is incorporated into a shared Transformer backbone to model translation-invariant relative temporal profiles. Crucially, the intermediate SOH estimate is directly injected into the RUL regression head as a physical degradation prior. Evaluations across the NASA, MIT-Stanford, and HUST datasets show that RoSIP-Batt significantly outperforms state-of-the-art baselines, reducing SOH estimation error to 1.994% MAE on NASA and restricting RUL prediction error to 62.85 cycles on Stanford. These findings establish RoSIP-Batt as a highly generalizable, computationally efficient solution suitable for real-time embedded BMS deployment.

The dominance of traditional rule-based methods in autonomous driving has gradually been replaced by learning-based approaches. While learning-based planners have achieved considerable success in passenger vehicles, their performance on heavy-duty trucks, particularly modern distributed electric-drive trucks (DETs), remains largely unexplored. To facilitate research and application of learning-based planners in DETs, this letter presents the first high-fidelity benchmark, called nuTruck, designed to support large-scale neural network training and closed-loop evaluation. Given the complex dynamics and high rollover susceptibility of DETs, we first incorporate a highly accurate nonlinear truck dynamical model into the simulation, which enables independent driving and steering of all wheels and captures dynamic load transfer caused by acceleration, deceleration, and cornering, thereby allowing quantitative assessment of rollover risk in closed-loop simulation. Second, we adapt several rule-based and learning-based planners as baselines for DETs and evaluate their performance in closed-loop simulation. Finally, using real-world driving scenarios from the nuPlan dataset, we conduct extensive closed-loop evaluations, analyzing not only conventional collision-free planning performance, but also the dynamical safety of the planned trajectories. The proposed nuTruck benchmark is expected to serve as a new standard for fair and realistic evaluation of autonomous driving planners on DETs.

Adaptive power management in Electric Vehicles (EVs) requires accurate power prediction. Although deep learning models have emerged as highly effective for time-series forecasting in this domain, their performance is prone to degradation when exposed to data with distributions different from the training data. We introduce a novel approach that enables on-device learning in resource-constrained EV systems to continuously adapt pretrained battery prediction models to new, unseen data. We leverage existing pretrained models by transforming them into adaptable versions that retain critical hyperparameter knowledge from their initial training. We comprehensively investigate both online and offline model adaptation strategies. Our results demonstrate significant improvements in forecasting performance across various models and time horizons, achieving mean absolute error reductions of up to 7.49% and 14.88% with online and offline adaptation techniques, respectively. This study highlights the substantial benefit of on-device adaptation, resulting in enhanced battery power predictions than unadapted model deployments in real-world EV scenarios.

Battery charging of Autonomous Mobile Robots (AMRs) in warehouses is a critical operational challenge that heavily impacts both order processing times and throughput. In this study, we address the dynamic AMR charging problem under stochastic order arrivals, where robots must learn optimal charging decisions. Traditional fixed-rule heuristics often prove suboptimal in dynamic environments and fail to account for multi-AMR coordination, leading to severe resource inefficiencies. To overcome these limitations, we propose a Proximal Policy Optimization (PPO)-based Deep Reinforcement Learning (DRL) framework designed for multi-block warehouses with fixed charging stations. Our model dynamically learns two key decisions: charging station selection and optimal charging duration, explicitly accounting for anticipated queuing times at the stations. Extensive numerical experiments benchmark the proposed model against state-of-the-art DRL and traditional heuristic approaches. Results demonstrate that our PPO framework increases order-completion rates by up to 6% compared to the strongest baseline, while significantly reducing the total time dedicated to recharging operations. Furthermore, we validate the model's robustness across diverse warehouse configurations and stochastic arrival rates. Finally, we interpret the learned DRL policy, offering valuable operational insights into its superiority over standard benchmarks.

The electrification of transportation through electric vehicles introduces new challenges for power grid management, such as increased peak demand, voltage fluctuations, line overloads, and the integration of variable renewable energy sources. To enable efficient integration of EVs while minimizing costs for users and avoiding network overloads, implicit coordination between EVs is required. This work compares two independent multi-agent reinforcement learning approaches for optimizing such decentralized EV charging: contextual combinatorial bandits and policy gradient algorithms. Using a realistic simulation environment with autonomous agents making decisions based on local environmental information (including price signals, state-of-charge, and temporal constraints), we evaluate their performance across varying congestion levels, and mixed-strategy configurations with heterogeneous agent groups under dynamic electricity pricing derived from real photovoltaic production data.

The increasing integration of Electric Vehicles (EVs) has imposed a growing harmonic challenge on the power grid. For AC/DC Power Factor Correction (PFC) in single-phase On-Board Chargers (OBCs), Model Predictive Current Control (MPCC) improves the current quality by predicting and tracking the inductor current. However, finite control set MPCC selects switching states, resulting in discrete control actions and a limited optimisation space. Moreover, the MPCC cost function based on instantaneous current tracking error has limited capability to compensate for low-order harmonic disturbances induced by dead time, control delay, and model parameter mismatch. This paper proposes a duty cycle predictive MPCC incorporating a real-time harmonic estimation reference. The proposed method dynamically estimates the low-order harmonic components of the input current and corrects the MPCC reference current, enabling continuous duty cycle control and targeted suppression of dominant low-order harmonics. Simulation results on a single-phase OBC demonstrate that the proposed duty cycle predictive MPCC reduces the steady-state current THD_i from 11.47% to 6.10% compared with the switching state predictive MPCC. With the harmonic reference, the THD_i is further reduced to 2.85%.

Electric vehicle charging stations (EVCSs) can expose distribution feeders to cyberattacks. While machine learning methods, including graph neural networks, can localize which bus is compromised, significant challenges remain in data sharing and model training. For example, privacy regulations grant EVCS owners the right to delete their training data from a deployed model, yet retraining from scratch on every request is computationally prohibitive. To address this, we study graph unlearning (GU) for EVCS cyberattack localization, formulated as a feature-level unlearning problem on a graph-level multi-label classification task. Specifically, we propose gradient difference-based graph unlearning (GDGU), which removes the influence of the requested deletion data through a first-order parameter correction. The correction is computed from the gradient difference between the original training data and a modified dataset in which only the charging power features at the requested EVCS buses are unlearned. Then, a batch-normalization recalibration and a brief recovery fine-tuning step are applied to restore localization utility. We benchmark GDGU against two second-order GU baselines on the IEEE 34-bus, 123-bus, and 8500-node distribution networks across three graph neural network backbones and cumulative unlearning scenarios. GDGU matches the strongest baseline on localization utility and reaches forgetting fidelity close to full-retraining, while unlearning 10 to 12 times faster than retraining from scratch and using far less memory than the second-order GU baselines.

The recent growth of EV adoption poses challenges for power systems, including increased peak demand and potential grid instability. Smart control of EV charging -- e.g., based on reinforcement learning (RL) -- can alleviate these issues by learning temporal and contextual patterns from historical data. Yet, in real-world scenarios, key features, such as departure time, often are unavailable. This, in turn, makes it harder for an RL agent to learn and execute an effective charging policy. To mitigate this uncertainty, a trained forecaster can approximate the unknown features from available data. However, since these forecasting models are typically trained for accuracy (rather than their impact on a downstream agent's decision quality), their errors may propagate and hinder the overall performance of a controller that is using the forecasts. To avoid this, we propose a decision-focused RL (DF-RL) framework in which the forecaster is trained end-to-end, i.e., with feedback from the charging policy actions taken by the RL agent. Such joint training of both the forecaster and controller ultimately results in higher-quality actions: our proposed DF-RL method yields superior charging decisions compared to other baselines, achieving up to a 14% improvement in total reward and a 55% reduction of unsupplied energy (i.e., charging that failed to happen because the EV already left), relative to the RL method without departure time forecasting.

Radio frequency wireless power transfer (RF-WPT) is an enabling technology for supporting uninterrupted communications in future Internet of Things systems by reducing the need for battery replacement and mitigating battery-waste-related issues. For large-scale RF-WPT deployment, one of the main challenges is the scheduler-level resource allocation. Specifically, the transmitter must decide how much energy to deliver, when, and to whom, under limited charging resources, incomplete receiver-side information, and uncertain near-future charging conditions. This article positions generative artificial intelligence (GenAI) as a promising tool for this setting because it can foresee multiple plausible charging scenarios conditioned on coarse operational context and receiver-side information. We propose GenAI to act as an uncertainty-aware support layer for the RF-WPT scheduler rather than as a standalone forecasting or decision-making tool. To this end, we first revisit the main challenges of RF-WPT scheduling, and discuss how major GenAI families can support uncertainty-aware charging decisions by generating scenario-based inputs for downstream tasks. We then present a warehouse-style case study showing that preserving uncertainty through the sampling capability of generative models can improve robust charging decisions compared with deterministic prediction and simple non-learning baselines, especially under risk-sensitive objectives. Finally, we identify key open challenges and present some directions for future research.

The rapid growth of Electric Vehicle (EV) adoption challenges power distribution networks through peak load spikes, voltage instability, and transformer overloads from uncoordinated charging. While Model Predictive Control (MPC) and standard Reinforcement Learning (RL) methods have addressed these issues, existing approaches rarely treat real-time carbon intensity or fluctuating renewable energy (RE) availability as primary scheduling objectives, leaving substantial decarbonisation potential unrealised. This paper proposes an emission-aware RL strategy based on the Soft Actor Critic (SAC) algorithm, with a multi-objective reward that penalises carbon emissions, curtailed on-site renewables, and unmet user demand. The agent is trained within a unified benchmarking framework on the EV2Gym platform, incorporating behind-the-meter solar and wind profiles, time-varying EirGrid carbon intensity data, and realistic workplace EV behaviour across 25 Electric Vehicle Supply Equipment (EVSE) units. Nine control strategies, including heuristics, emission-aware MPC variants, and the proposed RL agent, are compared under five renewable penetration scenarios (0%-50%) over ten independent runs each. The RL agent achieves a carbon intensity as low as 23.96 grams of carbon dioxide per kilowatt-hour under 50% wind penetration, representing up to 87% emission reduction versus the uncontrolled baseline, and outperforms the external graph-based Power Distribution Network (PDN) benchmark. Transformer overload remains below 7 kWh across scenarios, against up to 1093 kWh for the As Fast As Possible (AFAP) heuristic, and renewable self-consumption reaches 52% under combined wind and solar supply. Embedding carbon intensity forecasts into the RL state and reward aligns charging with low-emission periods while preserving grid compliance and user satisfaction.

Vehicle-to-vehicle (V2V) energy trading enables decentralized peer-to-peer energy exchange among electric vehicles (EVs), reducing grid dependency while monetizing surplus capacity. However, coordinating self-interested EV agents with diverse charging needs and uncertain arrival-departure schedules remains challenging. Existing approaches either require centralized optimization with computational limitations or lack fairness guarantees. This paper integrates Nash Bargaining Solution into Multi-Agent Deep Deterministic Policy Gradient, namely Nash-MADDPG, for incentive-aligned V2V energy trading. Nash bargaining determines efficient bilateral pricing, while Nash-guided price proximity rewards align agent learning toward bargaining-optimal strategies. Evaluation over 30-day continuous operation demonstrates an improvement of 61.6% in social welfare and 62.9% improvement in trading volume over Double Auction, while achieving superior fairness, such as 40.1% improvement in Jain's index. Testing across 6-100 agents over a 30-day horizon with continuous vehicle turnover confirms scalability across population size and empirically stable pricing near the Nash Bargaining benchmark.

The rapid growth of electric vehicles is shifting the main constraint on transport electrification from vehicle adoption to the deployment and operation of charging infrastructure. Charging-network design requires decisions across three interdependent layers: Planning, which determines where and how much infrastructure to build; Scheduling, which governs charging dispatch, pricing, and grid interaction; and Behavior, which captures how users choose stations, charging times, and charging durations. Existing studies have advanced each layer substantially, but the literature remains fragmented, and cross-layer interactions are often treated through simplifying assumptions. This survey develops a three-layer Planning-Scheduling-Behavior (PSB) framework to organize EV charging research according to decision horizon, actor objective, and coupling structure. We further identify a fidelity-tractability tradeoff, termed the PSB trilemma: each layer is computationally difficult in isolation, and realistic integration across layers generally requires reducing the fidelity of at least one layer. Reviewing the three pairwise-coupling literatures - Planning-Scheduling, Scheduling-Behavior, and Planning-Behavior - we show that the omitted third layer is typically fixed exogenously or represented by a static aggregate surrogate. These simplifications enable tractability but impose distinct costs: they can obscure long-term investment feedback, temporal grid and emissions dynamics, or heterogeneous user response and equity outcomes. Building on this diagnosis, we identify open challenges in emerging charging technologies, behavioral incentives, equity metrics, and city-scale learning-based methods that balance fidelity, interpretability, and policy relevance.

Federated learning (FL) has emerged as a promising paradigm for managing electric vehicle (EV) battery data in intelligent transportation systems (ITS), enabling privacy-preserving tasks such as anomaly detection and capacity estimation. However, most existing frameworks rely on centralized aggregation schemes, which pose critical limitations in terms of security and trust. To address these challenges, we propose ABC-DFL, an automated Byzantine-resilient clustered decentralized federated learning (C-DFL) framework for connected EVs. The proposed incentive-driven C-DFL system replaces the central server with an open-permissioned blockchain, featuring a new dynamic Quorum Byzantine Fault Tolerance (QBFT) protocol and an oracle-based aggregation layer, to enhance trust, security, and automation. At the core of ABC-DFL lies FLECA (Filtered Layered Enhanced Clustering Aggregation), a robust hierarchical aggregation protocol that mitigates Byzantine attacks by having each EV filter malicious updates using an adaptive threshold based on deviations from its reference model update. Oracle nodes, responsible for inter-group aggregation, employ robust clustering to isolate and aggregate model updates from trustworthy EV groups. Comprehensive experimental evaluations demonstrate that FLECA matches FedProx convergence under benign conditions and significantly outperforms existing defenses with attack impact scores below 0.10 in adaptive adversarial scenarios. Furthermore, several learning experiments with multitask models confirm the effectiveness and fairness of the incentive mechanism. Finally, on-chain and off-chain benchmarks validate the practicality of ABC-DFL.

During large-scale evacuations, concentrated electric vehicle (EV) charging demand can overload fixed charging stations (FCSs), leading to prolonged waiting time and increased risk exposure. To address this challenge, this study proposes dynamically deploying mobile charging trucks (MCTs) to complement FCSs, and develops an Adaptive Risk-aware MCT Deployment (ARMD) framework for real-time operation. It divides the MCT deployment into two problems: risk-aware allocation of MCTs among FCSs and dynamic routing of MCTs to the assigned FCSs, and solves them under an offline-to-online paradigm. The resource allocation problem is formulated as a decentralized partially observable Markov decision process, and a multi-agent proximal policy optimization (MAPPO)-based policy is developed to coordinate multiple MCTs under decentralized observations. The policy is pre-trained offline in an evacuation simulator and adaptively refined online according to current evacuation context. For routing, a spatio-temporal travel time predictor is developed to support rolling-horizon route updates. The proposed framework is evaluated in a simulated hurricane evacuation environment built using real-world data from Hillsborough County, Florida. Experiments show that ARMD consistently outperforms offline optimization, online heuristic dispatch, and rolling-horizon optimization in reducing risk exposure. For demand perturbation scenarios, ARMD reduces average risk exposure by up to 71.1%, relative to the baseline without MCTs. In the case of fixed e-vehicle charging infrastructure or road link failures, ARMD achieves 39.3% to 60.5% reduction in average risk exposure, with its advantages becoming more pronounced as the severity of disruption increases. These results demonstrate the effectiveness and robustness of ARMD in enhancing mobile charging operations for realistic scenarios of uncertain evacuation conditions.

Accurate state of charge estimation is critical for the success of electric vehicle battery management strategies, but it is well known that conventional estimators suffer from two fundamental shortcomings: cumulative errors that grow over time and reliance on simplified battery models that do not reflect real world dynamics. Therefore, this paper presents a novel hybrid approach combining Tucker tensor decomposition with LSTM networks, using full - lifecycle EV field data for SOC prediction. The inputs are charge status, mileage, voltage, current, cell differentials, and temporal features. Tucker decomposition is skillfully used to reduce dimensionality while maintaining the temporal structure, hence allowing a direct, fair comparison with standard LSTM. The result is unequivocal: Tucker - LSTM outperforms the baseline on all metrics, with MSE dropping 70.5% (from 21.07 to 6.22 ), MAE improving 48.7% (from 3.37% to 1.73%), RMSE falling from 4.59% to 2.49%, and $R^2$ rising from 0.918 to 0.976. Since the experimental results demonstrably demonstrate that tensor decomposition compresses high-dimensional battery data very well without loss of predictive fidelity, this paper naturally opens up a new direction for tensor-based analytics in electric vehicle battery management.

Accurate forecasting of electric vehicle (EV) charging demand is critical for grid stability, infrastructure planning, and real-time charging optimization. In this work, we study the problem of early prediction of charging demand, where the total energy of a session is estimated using only information available at plug-in time and during the first minutes of charging. This enables actionable decisions while the session is still in progress, which is of direct importance for EV network operators. We construct a session-level dataset from the Adaptive Charging Network (ACN), combining session metadata with early-window charging measurements, and derive tabular features capturing user intent, temporal patterns, and initial charging behavior. We focus on a single operational depot, Caltech, and model intra-depot heterogeneity through station-level client partitions while evaluating multiple model families in a federated learning (FL) setting. Our results show that federated models can approach centralized predictive performance while keeping data in-depot, enabling privacy-enhanced training across distributed charging infrastructures. Overall, we demonstrate that reliable demand estimates can be obtained early in the session with minimal data, and that FL provides a practical pathway toward scalable and privacy-aware analytics for EV charging networks. Code is available at https://github.com/Indigma-Innovations/federated-learning-ev-charging-demand.

This paper presents a configurable, grid-aware Agent-Based Model (ABM) for the systematic analysis of electric vehicle (EV) charging systems under configurable infrastructure and operational conditions. The model integrates heterogeneous EV behavior, charging column constraints, and a shared Energy Sandbox that regulates aggregate power allocation, enabling the joint study of user-centric charging dynamics and facility-level power behavior. Implemented in Python using the SimPy discrete-event framework, the approach supports scalable, event-driven simulations across varying system sizes, charger compositions, and scheduling strategies. A representative workplace charging scenario is investigated to illustrate how infrastructure configuration and coordination mechanisms influence energy delivery performance, infrastructure utilization, and aggregate load characteristics. The results highlight the context-dependence of infrastructure suitability and demonstrate how charging strategies and charger types reshape both service-level outcomes and grid-facing behavior. The proposed ABM provides a flexible and extensible simulation environment for exploring technical, operational, and grid-aware aspects of EV charging ecosystems, and for serving as a methodological basis for subsequent studies on advanced coordination strategies beyond the specific scenario analyzed in this study.

Electric truck operations require routing decisions that remain feasible under limited battery range, long charging times, travel and energy consumption, and competition for shared charging infrastructure. These features make electric truck routing a coupled logistics and energy problem, limiting the practicality of heuristics-based methods and rendering them computationally infeasible at scale. This paper proposes a learning-based framework for the stochastic electric truck routing under charging constraints and operational uncertainty. The problem, solved by Reinforcement Learning, is formulated as an event-driven semi-Markov decision process with shared charging resources, stochastic travel and energy requirements, and realistic nonlinear fast-charging behavior. To support learning in this setting, a graph-based representation of system state and feasible decisions is introduced, together with a rule-based action mask that restricts policies to operationally admissible actions; thus, improving training efficiency. Building on this formulation, an event-driven simulation environment is developed that supports both Reinforcement Learning and benchmarking against heuristic and mathematical programming baselines. Computational experiments across a range of fleet sizes show that the proposed learning-based algorithm consistently outperforms baselines and attains performance close to optimization benchmarks in many settings, while preserving high success rates under charging congestion and uncertainty.

We study city-scale control of electric-vehicle (EV) ride-hailing fleets where dispatch, repositioning, and charging decisions must respect charger and feeder limits under uncertain, spatially correlated demand and travel times. We formulate the problem as a hex-grid semi-Markov decision process (semi-MDP) with mixed actions -- discrete actions for serving, repositioning, and charging, together with continuous charging power -- and variable action durations. To guarantee physical feasibility during both training and deployment, the policy learns over high-level intentions produced by a masked, temperature-annealed actor. These intentions are projected at every decision step through a time-limited rolling mixed-integer linear program (MILP) that strictly enforces state-of-charge, port, and feeder constraints. To mitigate distributional shifts, we optimize a Soft Actor-Critic (SAC) agent against a Wasserstein-1 ambiguity set with a graph-aligned Mahalanobis ground metric that captures spatial correlations. The robust backup uses the Kantorovich-Rubinstein dual, a projected subgradient inner loop, and a primal-dual risk-budget update. Our architecture combines a two-layer Graph Convolutional Network (GCN) encoder, twin critics, and a value network that drives the adversary. Experiments on a large-scale EV fleet simulator built from NYC taxi data show that PD-RSAC achieves the highest net profit, reaching $1.22M, compared with $0.58M-$0.70M for strong heuristic, single-agent RL, and multi-agent RL baselines, including Greedy, SAC, MAPPO, and MADDPG, while maintaining zero feeder-limit violations.

This paper presents a personalized Battery Electric Vehicle (BEV) energy consumption estimation framework that integrates map-based contextual features with driver-specific velocity prediction and physics-based energy consumption modeling. The system combines route selection, detailed road feature processing, a rule-based reference velocity generator, a PID controller-based vehicle dynamics simulator, and a Bidirectional LSTM model trained to reproduce individual driving behavior. The predicted individual-specific velocity profiles are coupled with a quasi-steady backward energy consumption model to compute tractive power, regenerative braking, and State-of-Charge (SOC) evolution. Evaluation across urban, freeway, and hilly routes demonstrates that the proposed approach captures key driver behavioral patterns such as deceleration at intersections, speed-limit tracking, and road grade-dependent responses, while producing accurate power and SOC trajectories. The results highlight the effectiveness of combining learned driver behavior with map-based context and physics-based energy consumption modeling to produce accurate, personalized BEV SOC depletion profiles.

Predicting driver intention from neurophysiological signals offers a promising pathway for enhancing proactive safety in advanced driver assistance systems, yet remains challenging in real-world driving due to EEG signal non-stationarity and the complexity of cognitive-motor preparation. This study proposes and evaluates an EEG-based driver intention prediction framework using a synchronised multi-sensor platform integrated into a real electric vehicle. A real-world on-road dataset was collected across 32 driving sessions, and 12 deep learning architectures were evaluated under consistent experimental conditions. Among the evaluated architectures, TSCeption achieved the highest average accuracy (0.907) and Macro-F1 score (0.901). The proposed framework demonstrates strong temporal stability, maintaining robust decoding performance up to 1000 ms before manoeuvre execution with minimal degradation. Furthermore, additional analyses reveal that minimal EEG preprocessing outperforms artefact-handling pipelines, and prediction performance peaks within a 400-600 ms interval, corresponding to a critical neural preparatory phase preceding driving manoeuvres. Overall, these findings support the feasibility of early and stable EEG-based driver intention decoding under real-world on-road conditions. Code: https://github.com/galosaimi/Mind2Drive.

Accurate forecasting of electric vehicle (EV) charging demand is critical for grid management and infrastructure planning. Yet the field continues to rely on legacy benchmarks; such as the Palo Alto (2020) dataset; that fail to reflect the scale and behavioral diversity of modern charging networks. To address this, we introduce a novel large-scale longitudinal dataset collected across Scotland (2022 2025), which release it as an open benchmark for the community. Building on this dataset, we formulate EV charging demand as a spatio-temporal latent Gaussian field and perform approximate Bayesian inference via Integrated Nested Laplace Approximation (INLA). The resulting model jointly captures spatial dependence, temporal dynamics, and covariate effects within a unified proba bilistic framework. On station-level forecasting tasks, our approach achieves competitive predictive accuracy against machine learning baselines, while additionally providing principled uncertainty quan tification and interpretable spatial and temporal decompositions properties that are essential for risk-aware infrastructure planning.

Accurate temperature estimation of pouch cells with indirect liquid cooling is essential for optimizing battery thermal management systems for transportation electrification. However, it is challenging due to the computational expense of finite element simulations and the limitations of data-driven models. This paper presents a physics-informed machine learning (PIML) framework for the efficient and reliable estimation of steady-state temperature profiles. The PIML approach integrates the governing heat transfer equations directly into the neural network's loss function, enabling high-fidelity predictions with significantly faster convergence than purely data-driven methods. The framework is evaluated on a dataset of varying cooling channel geometries. Results demonstrate that the PIML model converges more rapidly and achieves markedly higher accuracy, with a 49.1% reduction in mean squared error over the data-driven model. Validation against independent test cases further confirms its superior performance, particularly in regions away from the cooling channels. These findings underscore the potential of PIML for surrogate modeling and design optimization in battery systems.

Mitigating cybersecurity risk in electric vehicle (EV) charging demand forecasting plays a crucial role in the safe operation of collective EV chargings, the stability of the power grid, and the cost-effective infrastructure expansion. However, existing methods either suffer from the data privacy issue and the susceptibility to cyberattacks or fail to consider the spatial correlation among different stations. To address these challenges, a federated graph learning approach involving multiple charging stations is proposed to collaboratively train a more generalized deep learning model for demand forecasting while capturing spatial correlations among various stations and enhancing robustness against potential attacks. Firstly, for better model performance, a Graph Neural Network (GNN) model is leveraged to characterize the geographic correlation among different charging stations in a federated manner. Secondly, to ensure robustness and deal with the data heterogeneity in a federated setting, a message passing that utilizes a global attention mechanism to aggregate personalized models for each client is proposed. Thirdly, by concerning cyberattacks, a special credit-based function is designed to mitigate potential threats from malicious clients or unwanted attacks. Extensive experiments on a public EV charging dataset are conducted using various deep learning techniques and federated learning methods to demonstrate the prediction accuracy and robustness of the proposed approach.