GNSS-Denied Localization

Latest papers 34

Oct 7, 2026cs.RO

Borrowed Eyes: Markerless Nano-UAV Flight with an Active Quadruped Observer

Nano unmanned aerial vehicles (nano-UAVs) can navigate confined spaces that larger robots cannot, but their payload capacity severely limits the sensors and compute available for self-localization in global navigation satellite system (GNSS)-denied environments. We present a vision-based system that localizes a nano-UAV from a quadruped robot with an arm-mounted camera. The quadruped tracks the drone, estimates its position in its own coordinate system using segmentation masks and depth, and transmits that position over a real-time radio link. To ensure continuous tracking, we developed a perception-aware nonlinear Model Predictive Controller (NMPC) that dynamically adjusts the quadruped's body and arm to maximize the drone's visibility, treating observation reliability as a primary control objective. Relying solely on this external estimate, the nano-UAV executed predefined trajectories from takeoff to landing with a median 3D localization error of 59 mm. The system demonstrates robustness against short visual occlusions by smoothly transitioning to onboard inertial flight when line-of-sight is temporarily lost. Ultimately, this framework allows a quadruped to offload the localization burden of a nano-UAV, enabling inspection of complex spaces that neither robot could navigate alone.
Sep 28, 2026cs.NI

Task-Oriented Communications for Edge-Assisted Multi-View Localization

Unmanned aerial vehicles (UAVs) and unmanned ground vehicles (UGVs) often lose satellite positioning in urban canyons, indoor facilities, and jammed or spoofed environments, making vision-based matching with geo-tagged databases important for absolute positioning. However, limited onboard computation and energy often require localization to be offloaded over wireless links with time-varying throughput. We present a network-adaptive task-oriented communication framework that jointly determines when to offload, which views and semantic rate to transmit, and which client to serve. The framework combines scalable orthogonality-regularized variational information bottleneck (O-VIB) encoding, value-of-information (VOI)-guided request control, and VOI-weighted Lyapunov scheduling. O-VIB supports importance-ordered latent prefixes and different view subsets, while edge assistance is requested only when its predicted reduction in localization risk exceeds the communication and service cost. Under a matched per-route traffic budget, VOI-guided control reduces mean and p95 route errors by 24.8% and 31.0% over budgeted periodic offloading on CARLA multi-view UAV data. In real-world indoor UAV and UGV experiments, the pipeline reduces mean position error by 28.0% and 14.4% over uncompressed all-view CLIP retrieval while cutting descriptor traffic by 98.6% and 98.2%, respectively. Under high congestion, value-aware shaping reduces edge-side p95 latency for the top-10% high-value requests by 76.2%, from 137.7 ms to 32.8 ms.
Sep 13, 2026cs.RO

Belief-Adaptive Online Autonomy for Quadrotor UAV Navigation under GNSS Degradation in Urban Environments

Reliable online autonomy is critical for quadrotor operation in urban airspaces, where global navigation satellite systems (GNSS) measurements suffer from multipath, blockage, and latency issues, introducing non-stationary, temporally correlated errors that degrade conventional GNSS-IMU fusion. This paper presents a belief-adaptive online autonomy framework that augments an extended Kalman filter (EKF) with explicit GNSS trust modelling, second-order online belief adaptation, and latency-aware out-of-sequence measurement handling. GNSS trust is represented as a latent belief state that modulates measurement weighting and multipath bias uncertainty, and is updated online using EKF consistency signals. Unlike reactive covariance tuning, the proposed approach enables proactive and stable sensor trust adaptation without prior environmental knowledge or offline training. Evaluation in simulated urban air mobility scenarios with correlated multipath, stochastic latency, and obstacle constraints demonstrates improved belief convergence, smoother trajectories, and reduced estimation and tracking errors compared to naive, adaptive, and first-order baselines. The framework preserves classical GNSS-IMU fusion structure and can be integrated directly into existing flight control pipelines, supporting robust online autonomy in GNSS degraded environments.
Sep 13, 2026cs.RO

Beyond Dead Reckoning: A Point of View on Camera--DAS--GNSS Continuity in Road Tunnels

Road tunnels remove satellite visibility where connected and automated vehicles still require continuous, attributable, and integrity-bounded positioning. This Point of View argues that tunnel localization should be treated as infrastructure-assisted cross-modal track continuity, not as extrapolation from the last trusted satellite fix. A trusted portal satellite solution provides the global anchor, distributed acoustic sensing (DAS) continuous motion evidence, cameras sparse identity and lane anchors, onboard sensing short-term dynamics, and edge computing association, fusion, integrity monitoring, and guarded reacquisition. Ground truth is reserved for offline calibration and validation. The article develops a falsifiable research and deployment agenda for progressing from synchronized multimodal evidence to validated, integrity-aware tunnel positioning continuity.
Sep 8, 2026cs.LG

Accountable and uncertainty-aware evaluation of sensor-based AI under distribution shift: devices, subjects, and nearly three years underground

Sensor-based AI systems are rarely operated under the conditions under which they were trained: devices, personnel and recording epochs change, and each change degrades performance in ways a random train-test split cannot reveal. We propose a staged, accountable evaluation protocol that treats the evaluation of a deployed model as a measurement with declared reference levels and a quantified uncertainty. Four cumulative generalisation stages hold out devices, subjects and time. Each stage is judged on quantiles of repeated trainings against chance references with the correct class count, an out-of-present-scope rate exposes silent misdirection towards classes that are no longer present in deployment relative to training, and an explicit decision rule ties roll-out decisions not to means but to 5% quantiles. We demonstrate the protocol on infrastructure-free geomagnetic localisation with smartphone-based recurrent classifiers in two real underground mines, including a replication of the scheme's training stages at the second site. Unchanged models are re-evaluated on data recorded 34 months after the training campaign, on a device generation unknown at training time and with a held-out surveyor. The 5% quantile of their present-conditioned precision there is 0.39 over 299 repeated trainings, 16.5 times the chance level; across the composition of the 42 reachable location classes the figure varies by +/-0.08, several times the spread between repeated runs. Repeated trainings of a single configuration show why means mislead: a bimodal configuration passes a mean-based test decisively while its 5% quantile lies more than an order of magnitude below chance.
Jul 24, 2026cs.RO

Mag4D-SLAM Dataset: A Repeated-Traversal Multi-Modal 4D Geomagnetic Dataset for Localization and Mapping

Geomagnetic sensing offers an infrastructure-free, absolute orientation reference that is robust to GNSS denial and visual degradation, yet no large-scale outdoor robotics dataset supports its systematic study in SLAM. Existing magnetic datasets are confined to small-scale indoor environments and lack the synchronized multi-modal sensing, repeated-traversal structure, and high-precision 6-DoF ground truth required for geomagnetic SLAM research. We present Mag4D-SLAM, the first large-scale outdoor geomagnetic SLAM dataset. It comprises 14 sequences totaling over 18 km of synchronized LiDAR, camera, IMU, tri-axis magnetometer, and GNSS measurements with SE(3) ground-truth poses, collected along structured campus trajectories under paired day/night conditions in both forward and reverse directions. Through repeated-traversal experiments, we analyze three core properties: magnetic field repeatability across different recording sessions (daytime and nighttime), drift-free global heading estimation, and location-discriminative magnetic signatures for cross-session place recognition. Mag4D-SLAM is designed to support research on yaw drift mitigation, magnetic loop closure, and long-term localization and to open new research questions on how geomagnetic sensing can complement visual and LiDAR modalities or provide a fallback cue under illumination changes, structural repetition, and GNSS-denied long-term operation.
Jul 21, 2026cs.RO

NGPS: GPS-Denied Aerial Geo-Localization and 2.5D Reconstruction via Deep Satellite Image Matching and Multi-Rate Sensor Fusion

We present NGPS (Next-Generation Positioning System), a visual geo-localization framework for high-altitude UAVs that provides GPS-free absolute positioning by matching down-facing images to georeferenced satellite imagery with deep features. The system combines (1) adaptive confidence-weighted UKF fusion, where NGPS covariance is modulated by RANSAC inlier ratio, reprojection error, and match confidence; (2) velocity-predictive kernel extraction, using VIO velocity to predict the satellite search region; and (3) an asynchronous multi-rate temporal priority queue that interleaves absolute position (1-2 Hz), VIO (10-20 Hz), and IMU (100-200 Hz) updates in chronological order. Globally optimized poses from VINS pose-graph optimization, anchored by NGPS corrections, further enable real-time 2.5D georeferenced orthomosaic reconstruction. On five flight sequences (60-150 m AGL), NGPS achieves 2.94 m position RMSE, with worst-case ATE 6.04 m at 150 m AGL and 2 m/s, yielding a 3.5x improvement over standalone monocular VIO. The system runs in real time on an NVIDIA Jetson Orin NX. Part of the implementation is open-sourced at https://github.com/snktshrma/ngps_flight.
Jul 15, 2026cs.RO

AeroMap3D: Anchoring Monocular UAV 6-DoF Localization to Visual-Geometric-Semantic Map Priors

We present AeroMap3D, a monocular 6-DoF UAV localization system that anchors onboard imagery to visual, geometric, and semantic map priors for GNSS-denied navigation. AeroMap3D addresses two fundamental challenges in map-referenced aerial localization: the cross-view discrepancy between UAV imagery and satellite maps, and the structural inconsistency between bare-earth digital elevation models (DEMs) and urban scenes. First, we introduce a lightweight adapter that enables a dense matcher pretrained on internet-scale generic data to perform reliable UAV-to-map registration without finetuning. By estimating the scale ratio and yaw offset between the UAV image and map tile, the adapter removes the dominant geometric misalignment induced by altitude, camera field of view, and heading before dense correspondence estimation. Second, AeroMap3D lifts 2D UAV-map correspondences onto DEM terrain while using OpenStreetMap annotations to reject semantically unreliable matches before RANSAC-PnP pose estimation, thereby reducing errors caused by unmodeled building heights and off-nadir structures. Delayed map-based pose measurements are further fused with relative-motion priors using a delayed-state EKF for continuous trajectory estimation. Without UAV-Terra3D retraining or tuning, AeroMap3D localizes all trajectories across eight Austin sites within 50 m and achieves 5.88 m mean 3D error over 55 km of flight.
Jul 10, 2026cs.RO

RASR: Range-Aware Scale Recovery for Metric UAV Navigation

A central challenge in image-goal UAV navigation under Global Navigation Satellite System (GNSS) denial is estimating metric distance and heading between current and goal views. Dense pairwise geometry models capture relative scene structure, but without a calibrated metric scale, they cannot directly provide reliable distance estimates for navigation. Although global scale calibration corrects the dominant scale bias, the remaining errors vary systematically with distance. In this paper, Range-Aware Scale Recovery (RASR) is proposed, which complements global scale calibration with range-aware residual correction. RASR encodes pairwise geometry extracted by a frozen Matching And Stereo 3D Reconstruction (MASt3R) backbone as a compact descriptor and separates the scale-recovery core from task-specific command calibration. On the official online evaluation of the UAVs in Multimedia 2026 PairUAV challenge, RASR achieved a total error of 0.003189, achieving a lower total error than global scale calibration alone. The results demonstrate that range-aware residual correction improves metric distance estimation beyond global scale calibration. Code and materials are available at https://github.com/lht-research/rasr-pairuav.
Jul 7, 2026cs.RO

SASGeo: Stability-Aware Semantic Map Localization for GNSS-Denied UAVs -- A Framework and Synthetic Proof of Concept

GNSS-denied unmanned aerial vehicles require occasional absolute position fixes to bound the drift of visual-inertial odometry. Cross-view image retrieval can provide such fixes, but raw appearance is sensitive to season, illumination, viewpoint, map age, and sensor modality. We propose \sas, a semantic map-localization framework that represents the environment through persistent structures such as roads, buildings, waterways, railways, intersections, and field boundaries. The method combines semantic raster alignment, relational graph evidence, feature stability and geographic distinctiveness, explicit positive/contradictory/unknown observations, and integrity-aware rejection of ambiguous fixes. Unlike a broad architecture-only proposal, this paper specifies concrete weighting and decision models and reports a reproducible synthetic proof of concept. In 220 randomized retrieval trials with rotation, scale changes, partial crops, occlusion, simulated map changes, and hard semantic decoys, a global semantic descriptor achieved 58.6% Recall@1, while spatial semantic matching variants achieved 94.5-95.5%. Wilson 95% intervals separate the global descriptor from the spatial variants but overlap among the spatial variants, so the experiment supports semantic geometry rather than a definitive benefit from each proposed module. The preliminary experiment does not validate real-flight navigation; rather, it demonstrates that structured semantic geometry can discriminate locations under controlled cross-view perturbations and identifies the harder aliasing, map-aging, and rejection tests required next.
Jul 6, 2026cs.RO

Uncertainty-Aware Velocity Correction for Proprioceptive Vehicle Localization using Evidential Mamba

Reliable localization in GNSS-denied environments remains a fundamental challenge for intelligent vehicles, as inertial navigation systems accumulate unbounded drift without external correction. Existing approaches provide drift correction through dedicated infrastructure, expensive external sensors, or complex multi-sensor fusion, each introducing practical deployment barriers. We propose Evidential Velocity Correction using Mamba (EVC-Mamba), a learning-based architecture that transforms onboard vehicle sensor data into a virtual velocity sensor for IMU drift correction without additional hardware. A Mamba-based selective state space model captures the temporal dynamics of vehicle motion, while evidential deep learning with a Normal-Inverse-Gamma distribution provides principled uncertainty quantification. The resulting uncertainty-aware velocity estimate is incorporated as a virtual correction measurement into an Error-State Extended Kalman Filter to reduce position drift. Evaluation on real-world vehicle data demonstrates that inertial navigation using the proposed velocity correction achieves localization accuracy within 10% of a dedicated external velocity sensor across different outage durations. The proposed architecture supports real-time onboard deployment at 40 Hz on edge hardware, enabling reliable localization during prolonged GNSS outages.
Jun 30, 2026cs.RO

Information-Aided DVL Calibration

The Doppler velocity log (DVL) velocity measurements are critical to the accuracy of autonomous underwater vehicle (AUV) navigation solutions and, consequently, to mission success. To ensure accurate measurements, the DVL is commonly calibrated before mission start while the AUV sails on the water surface, receiving global navigation satellite system (GNSS) signals that provide accurate reference measurements. Conventionally, Kalman filter-based approaches are employed during calibration to estimate the scale factor and misalignment errors. However, in certain environments, GNSS signals may be unavailable, rendering conventional calibration impossible and forcing the use of uncalibrated DVL measurements, which degrades navigation performance. To address this limitation, this work proposes information-aided calibration (IAC) with two main contributions: first, improving the accuracy of conventional Kalman filter-based calibration in GNSS-enabled environments, and second, enabling GNSS-free DVL self-calibration. Using real-world AUV datasets, the proposed IAC models achieve up to a 20% average improvement in GNSS-enabled environments and up to a 35% improvement in velocity vector estimation during GNSS-free DVL self-calibration. Overall, the proposed approach improves navigation accuracy, reduces navigation drift, and consequently enhances mission reliability.
Jun 30, 2026cs.CV

PiLoT v2: Pixel-to-Orthogonal Map Alignment for Free-view UAV Geo-localization

Real-time, drift-free UAV geo-localization is essential for autonomous missions in GNSS-denied environments. The pioneering system, PiLoT, achieves high precision via Neural Pixel-to-3D Registration, aligning UAV video streams with a single rendered reference view from 3D meshes. However, its reliance on heavy 3D meshes incurs massive storage overheads, complex map acquisition, and significant computational rendering costs, severely hindering deployment on embedded platforms. To address these bottlenecks, we propose PiLoT v2, a lightweight yet robust evolution that shifts the paradigm to direct pixel-to-orthogonal map registration for free-view UAV geo-localization. By leveraging True Digital Orthophoto Maps (TDOMs) and Digital Surface Models (DSMs) as the reference substrate, PiLoT v2 replaces GPU-intensive 3D rendering with a highly efficient, CPU-friendly map cropping operation. To bridge the severe geometric discrepancy between these 2.5D orthogonal crops and free-view oblique UAV imagery, we train a cross-view feature registration network using a novel, large-scale geometrically annotated dataset. Furthermore, we integrate onboard sensor prior--specifically gravity direction and single-point laser rang--directly into the pose optimization manifold to enhance robustness against cross-view visual degradation. Experimental results demonstrate that PiLoT v2 achieves performance comparable to, or even exceeding, its Pixel-to-3D predecessor, while offering drastically lower storage and computational costs.
Jun 29, 2026cs.RO

AUSLUN: A Fixed-Hover UAV--USV System for GNSS-Denied Maritime Search and Navigation

Global navigation satellite system (GNSS) denial can prevent an unmanned surface vehicle (USV) from both finding a distant vessel and maintaining a globally referenced approach. This paper presents AUSLUN (Automatic UAV Search, Localization, and USV Navigation), a fixed-hover aerial-surface system that uses a coastal unmanned aerial vehicle (UAV), which estimates its own pose through visual-inertial odometry (VIO), as a long-range sensing and navigation anchor. The central design shifts sensing motion from UAV translation to a zoom pod and closes the loop through three coupled elements: polygon-aware annular pod scanning, modality-aware bearing-range localization, and target-relative USV guidance with visual-loss recovery. The same gated recursive estimator uses laser range for the non-cooperative target and datalink range for the cooperative USV. Search-planning simulations show that the adaptive yaw bounds reduce scan time and redundant coverage relative to a matched fixed-sector scan, and GPS-referenced field data show that the gated recursive estimator outperforms non-recursive baselines in localization accuracy. An integrated maritime mission further demonstrates the complete search-to-navigation sequence, including a deliberately triggered visual-loss recovery. These results establish the feasibility and operating boundary of fixed-hover UAV assistance for stationary-target approach in coastal GNSS-denied environments. The source code and a video demonstration are publicly available at https://github.com/xirhxq/pod_search and https://youtu.be/S-5RkJs35JI.
Jun 28, 2026eess.SY

Robust Extended Kalman Filter for Land Navigation Using Massive Array of MEMS IMUs

We propose a robust Extended Kalman Filter (EKF) architecture for land navigation using an array of hundreds of low-cost micro-electromechanical systems (MEMS) inertial sensors. The main challenges in this setting are bursty sensor-specific bias errors, bias drift, and the need to aggregate many inertial measurements without increasing the computational burden of the navigation filter. To address these challenges, we introduce Robust Inertial Sensor Array Fusion (RISAF), a pre-filtering framework that combines dynamic percentile gating with real-time bias tracking before the EKF prediction step. The proposed aggregation suppresses anomalous sensor readings and compensates for individual sensor drift while preserving the vehicle-level kinematic signal. Because the resulting fused inertial measurements are passed to a standard EKF, the navigation filter retains a minimal state vector and supports real-time execution. We evaluate RISAF through extensive simulations and real-world field tests in GNSS-denied environments, with the data provided as supplementary material. Compared with a baseline that averages the sensor readings, RISAF achieves substantially improved azimuth accuracy and reduced drift accumulation. These results demonstrate that robust fusion of large MEMS inertial arrays can bridge a substantial part of the gap between cost-effective hardware and tactical-grade inertial navigation performance.
Jun 27, 2026cs.RO

Cross-Session 3D LiDAR and Camera Fusion for Robust Localization of Unmanned Aerial Vehicles in GPS-Denied Environments

Accurate localization of unmanned aerial vehicles (UAVs) is essential for applications such as structural health monitoring, especially in environments where Global Positioning System (GPS) signals are denied or unreliable, like indoor spaces, tunnels, urban canyons, or areas beneath large structures. To address this challenge, we propose Cross-Fusion, a novel method for real-time UAV localization that integrates data from a 3D Light Detection and Ranging (LiDAR) and a monocular camera. A key contribution is its cross-session fusion strategy, which integrates visual and geometric information collected from multiple agents during routine baseline surveys to improve localization consistency and map completeness. The system employs LiDAR-based odometry for motion tracking and image-based feature matching via a single red-green-blue (RGB) camera to correct drift and improve accuracy. Unlike visual-inertial systems, Cross-Fusion maintains a simple sensor setup and avoids the complexity of stereo or global shutter configurations. Experimental results demonstrate that Cross-Fusion achieves localization accuracy comparable to GPS-based methods and performs reliably in challenging feature-sparse environments.
Jun 24, 2026cs.RO

MIL-LC: A Robust Magnetometer-Inertial-LiDAR Fusion Multimodal Localization Framework

Localization in challenging environments, such as GNSS-denied, geometrically repetitive, or textureless scenes commonly found in offices, hotels, and underground parking facilities, remains an open problem for reliable autonomous mobile robot (AMR) deployment. Single-modality localization methods are inherently limited by the constraints of individual sensors. Although multimodal fusion frameworks have shown improved robustness, most existing approaches still rely heavily on geometric or texture features, or on infrastructure-based beacons, which increase installation and maintenance costs while reducing deployment flexibility. Recently, ambient magnetic field (AMF)-based localization has attracted growing attention because it does not depend on geometric or texture features, nor does it require additional infrastructure, making it a promising complementary modality for AMR localization. However, existing studies have only explored such fusion in pedestrian scenarios using smartphone-mounted sensor suites, and practical solutions for AMR systems remain largely unexplored. To address this gap, this article proposes a magnetometer-inertial-LiDAR fused multimodal localization framework with a custom-designed sensor suite, termed MIL-LC, which provides reliable localization even when LiDAR suffers from geometric degeneration or when the magnetic map changes during long-term deployment. Extensive experiments in both simulation and real-world environments demonstrate that the proposed MIL-LC framework achieves robust and accurate localization performance.
Jun 21, 2026cs.RO

BLENDS: Bayesian Learning-Enhanced Deep Smoothing for GNSS-Denied Environments

Maintaining accurate navigation during GNSS outages remains a significant challenge for autonomous systems relying on low-cost inertial sensors. While classical smoothing methods, such as the two-filter smoother and Rauch-Tung-Striebel smoother, exploit measurements collected before and after an outage, their performance remains limited by the accuracy of conventional GNSS measurements. This paper presents Bayesian learning-enhanced navigation with deep smoothing (BLENDS), a transformer-based framework that augments Bayesian smoothing with learned covariance adaptation and state correction. The proposed method preserves the statistical foundations of Bayesian estimation while leveraging data-driven learning to improve navigation accuracy. Evaluations on the quadrotor dataset with GNSS outages demonstrate that BLENDS consistently outperforms both model-based smoothers, achieving up to 25.6% improvement in the position root mean square error while also reducing estimation uncertainty. Furthermore, BLENDS learns to compensate for the systematic bias between conventional GNSS positioning and RTK ground truth, enabling accuracy beyond that achievable with conventional GNSS measurements alone. The results demonstrate the potential of learning-enhanced Bayesian smoothing for resilient and high-accuracy navigation in GNSS-challenged environments.
Jun 18, 2026cs.RO

Route-Constrained Robust Fusion Estimation for MEMS/GNSS Integrated Navigation of Unmanned Ground Vehicles in GNSS Degraded Environments

To address cumulative localization drift of unmanned ground vehicles in structured road environments under severe Global Navigation Satellite System signal occlusion, this paper proposes a robust route-constrained state estimation method. During periods without satellite signals, the proposed method establishes the correspondence between the historical dead reckoning trajectory and local segments of the mission route extracted from a high-definition map, and estimates a route-referenced position via a two-dimensional rigid transformation. The estimated position is then formulated as a pseudo-position observation and incorporated into an Extended Kalman Filter update. In this way, route constraints at the road level can be continuously injected into a unified state estimation framework, thereby suppressing position deviation relative to the mission route while indirectly improving azimuth estimation. To enhance practical applicability, engineering strategies, such as trigger control, matching quality validation, route offset compensation, and single update correction limiting, are further introduced. Experiments in three representative scenarios, including a long tunnel, a multi-segment tunnel, and a curved tunnel, show that the proposed method effectively suppresses error accumulation during satellite outages, reduces the risk of large maximum deviation, and improves localization continuity and road-level usability.
Jun 12, 2026cs.RO

ForestBack: Breadcrumb-Based Pedestrian Dead Reckoning for Infrastructure-Free Return Navigation

Reliable return navigation remains an important challenge in GPS-denied environments where external positioning infrastructure may be unavailable or unreliable. This paper presents ForestBack, an infrastructure-free pedestrian return navigation framework based on breadcrumb-based pedestrian dead reckoning (PDR). The system records a user's walking route as a sequence of reversible breadcrumb nodes and generates reverse-path guidance without requiring GPS, Wi-Fi, Bluetooth beacons, or pre-installed infrastructure. ForestBack integrates acceleration-based step detection, adaptive step-length estimation, magnetometer-assisted heading estimation, barometric-altitude correction, and bidirectional breadcrumb path reconstruction. The system was evaluated using an indoor obstacle-avoidance route with five checkpoints, where the user navigated around a central obstacle. A dataset of 36 walking trials and 42,474 time-series samples was used for evaluation, including IMU signals, magnetometer readings, barometric variables, turn-event labels, ground-truth trajectories, baseline PDR outputs, proposed ForestBack outputs, and power-related measurements. Experimental results show that ForestBack reduced the mean RMSE from 1.129 m to 0.965 m compared with traditional PDR, corresponding to a 15.76% improvement. The mean final-position error was reduced from 1.781 m to 1.388 m, while turn-event detection consistency reached approximately 99.90%. These results indicate that ForestBack improves trajectory reconstruction and route-preserving return guidance in obstacle-avoidance scenarios. The released dataset and analysis notebook support reproducibility and future benchmarking of infrastructure-free PDR-based return navigation systems.
Jun 9, 2026cs.CV

Globally Localizing Lunar Rover in Pixels via Graph Alignment

Precise rover localization is a prerequisite for autonomous lunar exploration, yet the absence of Global Navigation Satellite System (GNSS) signals and the cumulative drift of local localization methods severely constrain long-range missions. Cross-view localization provides a promising drift-free global solution by matching rover-view and satellite-view imagery. However, the lunar environment poses unique challenges for correspondence alignment, including inter-entity entanglement, inter-viewpoint divergence, and simulation-to-real domain shift. To address these challenges, we propose Warped Alignment of Reprojected Graphs (WARG), a framework that leverages unified graph learning and reprojected graph matching for robust cross-view alignment. Pretrained on the synthetic LuSNAR dataset, WARG achieves an average test error of 0.32 m and demonstrates robust zero-shot generalization to the synthetic lunar south pole region with an error of 3.63 m. More importantly, when validated on real-world data from the YuTu-2 rover, WARG achieves a localization error of 1.68 m within a 100 m x 100 m search area, corresponding to nearly one-pixel precision in low-resolution satellite imagery with a spatial resolution of 1.40 m/pixel. Beyond accuracy, WARG is computationally efficient, containing only 1.56M parameters, corresponding to 16.12% of previous lightweight models, and operating at 5.49 Hz on an NVIDIA RTX A6000 GPU, approaching GNSS-level update frequency. Finally, we observe that WARG naturally develops low-level spatial awareness, including semantic segmentation and structural reasoning, through cross-view localization learning, highlighting its potential as a promising paradigm for spatial intelligence with minimal annotation cost. The source code is available at https://github.com/maochen-casia/warg.
Jun 8, 2026cs.RO

Dual Quaternion-Based Unscented Kalman Filter with Visual Inertial Odometry for Navigation in GPS-Denied Environments

Reliable navigation in GPS-denied environments remains a fundamental challenge in robotics, aerospace, and autonomous vehicle applications. This paper presents a Dual Quaternion-Based Unscented Kalman Filter (DQUKF) equipped with a Visual Inertial Odometry (VIO) algorithm for accurate state estimation enabling navigation in GPS denied locations. The proposed framework formulates the DQUKF in an error state manner, where the nominal pose is represented by a unit dual quaternion and the local pose error is represented by a 6-dimensional twistor parameterization used for sigma point generation, covariance propagation, and measurement correction. In parallel, the VIO algorithm tracks features across image frames, synchronizes measurements between the IMU and camera, and provides visual constraints that complement inertial propagation. Simulation results on the EuRoC MAV dataset show that the proposed DQUKF converges under high initialization uncertainty and achieves a position RMSE of 0.2584~m in the difficult flight sequence, outperforming the benchmark filters.
Jun 4, 2026cs.RO

Meridian: Metric-Semantic Primitive Matching for Cross-View Geo-Localization Beyond Urban Environments

Successful robot automation requires accurate global localization to support repeatability, task planning, goal specification, and safe operation. However, reliable localization in GNSS-denied environments remains an open problem. Overhead aerial imagery offers a promising solution, but existing approaches primarily target structured urban environments and have been rarely demonstrated in unstructured natural terrain. Limitations of the state-of-the-art include a reliance on models trained for specific environments, as well as difficulty handling repetitive geometries and featureless landscapes commonly found in natural outdoor areas. To overcome these challenges, we present Meridian, a method for matching high-level metric-semantic primitives across aerial images and ground robot RGB-D camera data that achieves accurate global localization and generalizes well across diverse environments, all without any training or algorithmic fine-tuning on area-specific data. We formulate novel consistency metrics to estimate a distribution over robot submap poses and to reject outlier hypotheses in a robust pose graph optimization step for accurate robot trajectory estimation. We demonstrate that our algorithm can localize a ground robot across a wide variety of environments, including an autonomous driving dataset, a park and campus area, and a wilderness camp, with an average optimized trajectory error of 2.4 m over 19 km of ground traversal.
May 30, 2026cs.CV

DINO-GFSA: Geo-Localization via Semantic Gated Fusion and Mamba-based Sequential Aggregation

Cross-view geo-localization (CVGL) is critical for Unmanned Aerial Vehicle (UAV) self-positioning and target localization in GNSS-denied environments. However, acquiring robust semantics while preserving finegrained spatial details remains challenging. To address this, we propose DINO-GFSA, a framework leveraging a LoRA (Low-Rank Adaptation) adapted DINOv3 (ViTL) backbone for parameter-efficient, high-capacity representation. Crucially, we introduce a Semantic Gated Residual Fusion module, which utilizes high-level semantics to selectively calibrate and integrate low-level spatial cues, effectively bridging the semantic gap. Furthermore, a Mamba-based Sequential Aggregation Head is designed to capture long-range spatial dependencies with linear complexity. Experiments demonstrate state-of-the-art performance on University-1652 and DenseUAV benchmarks, notably surpassing the previous best on DenseUAV by 3.48% on Recall@1. These results validate DINO-GFSA as a generalized, robust solution for UAV CVGL.
May 29, 2026cs.CV

Vision-Based Localization in Dense Urban Environments: A Case Study of an Urban Village in China

Urban villages, the widespread informal settlements which have emerged as a result of rapid urbanization, are now major residential hubs for migrant workers in large cities in China. The dense arrangement of buildings in these areas often leads to unreliable GPS signals, while incomplete mapping data further impairs accurate route planning and navigation. These issues not only hinder everyday mobility but also pose significant challenges for emergency response, as confusing road layouts and GPS inaccuracies can complicate evacuation efforts. To address these challenges, we propose a practical vision-based geo-localization solution tailored for dense urban environments. Our approach features a low-cost data collection pipeline utilizing a dual-camera system, comprising a panoramic camera and a smartphone camera, to capture synchronized 360-degree panoramas and query images. Using Shipai Village, a well-known densely populated urban village in Guangzhou, as a case study, we develop a specialized image geo-localization dataset. We then assess and compare the performance of existing models across various scene types to identify their strengths and weaknesses. The findings demonstrate both the potential and limitations of visual-based localization in dense urban-village environments. Our framework aims to enhance pedestrian navigation, last-mile delivery, and emergency management in areas with poor GPS coverage, ultimately supporting the vulnerable populations living within these informal settlements.
May 24, 2026cs.RO

Loosely Coupled Factor Graph Optimization for Pseudolite-Augmented Navigation

In Global Navigation Satellite System (GNSS)-degraded environments, pseudolites (PLs) provide additional signal sources to enhance positioning performance, but their integration in optimization-based frameworks remains limited. This paper presents a loosely coupled factor graph optimization (FGO) framework that fuses the GNSS/PL least-squares (LS) solutions with inertial measurement unit (IMU) data. The evaluation considers low GNSS visibility scenarios with four high-elevation GNSS satellites and up to two PL transmitters over an 80~s window. FGO achieves a 22.8% to 41.3% reduction in mean 3D error compared to standard LS methods. Compared to a GNSS-IMU baseline, incorporating PL transmitters further improves positioning accuracy, with performance depending on geometry.
May 19, 2026cs.RO

Enhancing Graph-Based SLAM in GNSS-Denied environments by leveraging leg odometry

Autonomous navigation in GNSS-denied environments remains a core challenge for legged robots, where exteroceptive sensors such as LiDAR are prone to elevation drift in geometrically sparse or repetitive scenes. We present a factor graph architecture that augments the LIO-SAM framework with a parallel kinematic lane driven by proprioceptive leg odometry, coupled to the main LiDAR-inertial lane via an identity relative pose constraint with a selective noise model. Applied to a Linxai D50 quadruped platform across two outdoor loops totaling over one kilometer, our approach reduces elevation drift from over 30m to under 30cm and enables convergence in a scene where the baseline pipeline fails entirely. These results suggest that proprioceptive data, already computed onboard for gait control, constitutes a lightweight and effective vertical anchor for SLAM in GNSS-denied settings.
May 12, 2026cs.CV

Weather-Robust Cross-View Geo-Localization via Prototype-Based Semantic Part Discovery

Cross-view geo-localization (CVGL), which matches an oblique drone view to a geo-referenced satellite tile, has emerged as a key alternative for autonomous drone navigation when GNSS signals are jammed, spoofed, or unavailable. Despite strong recent progress, three limitations persist: (1) global-descriptor designs compress the patch grid into a single vector without separating layout from texture across the view gap; (2) altitude-related scale variation is retained in the learned embedding rather than marginalized; and (3) multi-objective training relies on hand-tuned scalars over losses on incompatible gradient scales. We propose SkyPart, a lightweight swappable head for patch-based vision transformers (ViTs) that institutes explicit part grouping over the patch grid. SkyPart has four theory-grounded components: (i) learnable prototypes competing for patch tokens via single-pass cosine assignment; (ii) altitude-conditioned linear modulation applied only during training, making the retrieval embedding altitude-free at inference; (iii) a graph-attention readout over active prototypes; and (iv) a Kendall uncertainty-weighted multi-objective loss whose stationary points are Pareto-stationary. At 26.95M parameters and 22.14 GFLOPs, SkyPart is the smallest among top-performing methods and sets a new state of the art on SUES-200, University-1652, and DenseUAV under a single-pass, no-re-ranking, no-TTA protocol. Its advantage over the strongest baseline widens under the ten-condition WeatherPrompt corruption benchmark.
May 8, 2026cs.LG

Tracking Large-scale Shared Bikes with Inertial Motion Learning in GNSS Blocked Environments

Although Global Navigation Satellite Systems (GNSS) provide a general solution for bike tracking outdoors, there still exist complex riding environments where only inertial navigation systems work, such as urban canyons. Despite decades of research, localization using only low-cost inertial sensors still faces challenges such as cumulative drifts and poor robustness caused by filtering methods. Furthermore, sensors such as visual and LiDAR could provide reliable measurements, but they are not suitable for large-scale deployment. In this paper, we propose an inertial tracking framework that integrates bicycle mechanical constraints with a mixture-of-experts model. Specifically, we leverage multiple expert modules to capture shared representations and weight them through the gating mechanism, thus improving multi-task learning performance and enabling uncertainty-aware trajectory estimation. Furthermore, based on the mechanical transmission between the pedal and the rear wheel of a bike, we explore the intrinsic relationship between the rider's periodic pedalling behaviors and acceleration variations, and convert such patterns into bike's wheel speed for dynamic calibration. Experiments with real-world riding data from shared bikes of the DiDi ride-hailing platform demonstrate that our system improves the accuracy of baselines by at least 12%, with wheel speed errors below 0.5 m/s at 95-percentile.
May 5, 2026cs.RO

Robust Visual SLAM for UAV Navigation in GPS-Denied and Degraded Environments: A Multi-Paradigm Evaluation and Deployment Study

Reliable localization in GPS-denied, visually degraded environments is critical for autonomous UAV opera- tions. This paper presents a systematic comparative evaluation of five V-SLAM systems ORB-SLAM3, DPVO, DROID-SLAM, DUSt3R, and MASt3R spanning classical, deep learning, recurrent, and Vision Transformer (ViT) paradigms. Experiments are conducted on curated sequences from four public benchmarks (TUM RGB-D, EuRoC MAV, UMA-VI, SubT-MRS) and a custom monocular indoor dataset under five controlled degradation conditions (normal, low light, dust haze, motion blur, and combined), with sub-millimeter Vicon ground truth. Results show that ORB-SLAM3 fails critically under severe degradation (62.4% overall TSR; 0% under dense haze), while learning-based methods remain robust: MASt3R achieves the lowest degraded ATE (0.027 m) and DUSt3R the highest tracking success (96.5%). DPVO offers the best efficiency robustness trade-off (18.6 FPS, 3.1 GB GPU memory, 86.1% TSR), making it the preferred choice for memory-constrained embedded platforms. Embedded deployment analysis across NVIDIA Jetson platforms provides actionable guidelines for SLAM selection under SWaP-constrained UAV scenarios.