Metric Depth Estimation

World-action models (WAMs) jointly predict how a scene will evolve and how an agent should act, however joint generation alone does not necessarily impose a shared geometric constraint on these predictions. We present PhysWAM, a unified world-action model for autonomous driving that co-denoises multiview video, metric depth, and ego motion within a single flow-matching transformer. To ground world and action generation in measured scene geometry, we introduce Coupled Point Projection (CPP) that unprojects the generated depth into 3D points, transforms them using the generated $\mathrm{SE}(3)$ ego motion, and minimizes their distance to LiDAR points transformed using the recorded ego motion. This geometric constraint promotes physical consistency with the measured scene by jointly supervising generated depth and motion alongside their standard flow-matching objectives. At inference, trajectory selection relies only on a simple label-free consensus rule, with no learned scorer or simulator feedback. We evaluate PhysWAM across NAVSIM v1 and v2 planning, zero-shot closed-loop transfer, and future video and metric-depth prediction. Despite PhysWAM's simple selection procedure, it achieves strong planning performance and transfers zero-shot to unseen driving environments. It also generates accurate metric depth and temporally coherent video, with CPP improving both planning and depth prediction. Together, these results demonstrate that the geometric relationship between scene depth and ego motion provides a direct way to couple world and action generation within a simple unified model.

Dense metric depth from cameras is essential to real-world 3D applications, yet achieving accuracy, faithful surface geometry, and fast inference simultaneously remains challenging. Monocular foundation models provide rich, transferable geometric priors but lack reliable metric scale, while depth-completion networks recover metric depth at the cost of geometric fidelity, cross-domain robustness, or speed. We present FounRef, a training-free method that aligns a frozen monocular foundation prior with sparse metric anchors to produce dense metric depth. FounRef is modular by design: its depth prior, anchor source, and refinement solver can each be replaced independently. We instantiate FounRef with MoGe-2 and LiDAR anchors. FounRef validates each anchor against the prior's dense depth prediction, rejecting inconsistencies caused by cross-sensor misalignment that geometry-only filters cannot detect. It then applies global and local metric corrections through a structure-preserving solver, retaining the prior's fine-grained geometry. FounRef requires no task-specific training and operates out of the box across unfamiliar cameras and scenes. On out-of-domain data, it delivers up to 24% lower depth error, 92% lower surface-normal noise, and almost 15x faster inference than DMD3C, a state-of-the-art depth-completion network. By decoupling metric alignment from geometry prediction, FounRef provides an accurate, geometrically faithful, and efficient approach to dense metric depth that can directly benefit from future advances in foundation models and metric sensors.

Dense 3D depth perception fails under smoke, fog, and darkness because optical sensors cannot penetrate airborne particulates. mmWave radar remains usable and measures range accurately under these conditions, but its small aperture limits angular resolution. We present GRADE, which grounds a pretrained generative prior in single-frame radar geometry to estimate high-fidelity metric depth. GRADE first maps raw 4D radar spectra to coarse metric depth. A latent diffusion backbone then recovers structural detail while conditioning every denoising step on this estimate. A pixel-space adapter uses residual camera cues when available and is trained across clear, smoke-degraded, and occluded inputs so the full output approaches the radar-conditioned path as visibility degrades. Trained and evaluated on ~95K frames across 12 buildings with real smoke, GRADE achieves an MAE of 0.303 m in clear scenes and 0.313 m under smoke, outperforming existing baselines. Code and datasets are available at https://phi-lab-rice.github.io/GRADE.

Render--match--PnP relocalization establishes correspondences between query image pixels and 3D map points for camera pose recovery, but their potential to support dense depth estimation is often overlooked. To exploit this geometric information, we present RIDE, which estimates dense metric depth from a robot's RGB stream. Given a metrically scaled 3D Gaussian Splatting (3DGS) model, RIDE combines sparse metric depth observations derived from PnP-RANSAC inlier correspondences with the geometric prior of a pretrained video-depth model. To handle uneven and intermittent observations, it integrates global and local depth correction with temporal memory, supporting depth estimation through short observation gaps after metric scale initialization. Trained on public RGB-D videos, RIDE is evaluated on robot sequences without fine tuning. Experiments show improved depth accuracy and temporal consistency over scale-only calibration, demonstrating how localization geometry can support both pose recovery and dense robot perception.

Monocular depth estimation has long stood as a fundamental challenge in computer vision, enabling a wide range of applications including 3D reconstruction, robotics, autonomous driving, and augmented reality. This survey traces the field's evolution from early learning-based methods to the emergence of transformative foundation models. We begin by framing the problem, distinguishing between relative and metric depth estimation, and highlighting the key challenges that have shaped a decade of research. We then present common problem formulations and introduce the most widely used datasets, covering indoor, outdoor, and synthetic data. Following this, we review major advances prior to the foundation model era, distilling core insights from influential methods that contributed to improvements in accuracy, efficiency, and robustness. The survey then turns to the recent surge of foundation-model-based approaches, categorizing them into discriminative and generative paradigms and emphasizing the critical roles of large-scale pretraining (e.g., DINOv3) and synthetic data. We compare representative models using both quantitative benchmarks and qualitative examples, and discuss natural extensions to video-based depth estimation. Further, to illustrate real-world impact, we highlight the integration of depth estimation into applications such as visual SLAM, content generation, and robot perception. Finally, we outline open challenges and promising research directions as the field advances further into the era of foundation models.

Dense metric depth prediction from cameras and millimeter-wave radar offers a cost-effective sensing solution for autonomous systems. However, radar measurements are inherently sparse and susceptible to clutter, multipath reflections, and projection errors. While aggregating multiple radar frames provides denser metric cues, it also introduces temporal misalignment and dynamic-object interference. Directly propagating such unreliable measurements can therefore corrupt large regions of the predicted depth map. To address this issue, we propose RbFT-Net, an end-to-end rectify-before-fuse framework for multi-frame 4D radar-camera depth completion. Rather than assuming accumulated radar returns to be accurate, RbFT-Net treats them as noisy temporal anchor candidates. An image-conditioned rectification module jointly corrects their image-plane locations and metric depths while estimating pointwise reliability. The rectified anchors are then selectively propagated before high-level multi-modal fusion, suppressing the influence of unreliable measurements. Experiments on ZJU-4DRadarCam and a newly collected 4D radar-camera-LiDAR dataset show that RbFT-Net consistently outperforms the evaluated independent radar-camera methods and remains competitive with plug-in pipelines using auxiliary monocular depth models. Cross-platform evaluation and component analyses further support the effectiveness of the proposed rectification and reliability-aware propagation strategy.

Direct Time-of-Flight (dToF) sensors provide highly accurate metric depth and are more robust than indirect ToF systems in challenging real-world conditions. However, their high manufacturing cost and limited photodiode array size produce depth maps that are extremely sparse, low-resolution, and noisy, making them unsuitable for VR/XR, robotics, and 3D perception tasks that require dense metric depth. Existing monocular and depth completion methods struggle to handle the unique sampling patterns and hardware artifacts of dToF devices, and their performance often deteriorates significantly under severe sparsity or noise. We present a generalizable framework for dense metric depth completion from sparse dToF measurements, capable of operating across diverse sensor types, sparsity levels, and noise conditions. Our model employs a depth-guided dual-branch Vision Transformer encoder that processes RGB images and sparse dToF measurements separately, while a masked joint attention module allows depth tokens to reliably guide image features without being overwritten by them. A lightweight decoder reconstructs dense metric depth efficiently, without diffusion-based or refinement-heavy post-processing. To address the scarcity of paired training data, we introduce a comprehensive dToF simulation pipeline that reproduces the characteristics of flash, sub-VGA flash, and rotating sensors, including hardware-induced degradation, irregular sparsity, and realistic noise distributions. Trained entirely on synthetic data, our model achieves strong zero-shot generalization across 6 datasets and 3 real dToF devices, outperforming state-of-the-art approaches in both accuracy and computational efficiency. This establishes a robust and practical solution for dense metric depth completion from sparse direct ToF sensors. Our code and models are open-sourced. See https://vclab.kaist.ac.kr/cvpr2026p3.

Safe autonomous navigation requires a holistic understanding of dynamic environments, necessitating the simultaneous estimation of metric depth, semantic segmentation, and instance trajectories. While depth-aware video panoptic segmentation (DVPS) unifies these tasks, existing approaches often rely on computationally expensive, multi-stage pipelines or offline tracking, rendering them unsuitable for real-time decision-making. To address this, we propose DVPSFormer, a unified online architecture designed for efficient 4D scene understanding. Central to our approach is explicit scene discretization (ESD), a novel mechanism that leverages segmentation queries to represent foreground and background regions, enabling a discrete-to-continuous (D2C) depth head to decode metric depth in a single pass. This tightly couples semantic and geometric learning while significantly reducing latency. Furthermore, we propose an online majority voting (OMV) mechanism that exploits temporal consistency to refine classification during instance tracking. DVPSFormer establishes a new state-of-the-art on the Cityscapes-DVPS and SemKITTI-DVPS benchmarks, offering a streamlined solution for online robotic perception. Code and models are available at https://royyang0714.github.io/DVPSFormer.

Accurate yet low-latency depth is essential for radar-camera perception in autonomous systems. Cameras provide rich appearance but lack metric scale, whereas automotive radar offers metric range but is sparse and noisy. Many pipelines are multi-stage or depend on auxiliary annotations, increasing latency and limiting portability. We introduce JustDepth, a single-stage radar-camera depth estimator trained only with radar, camera, and single-scan LiDAR. All radar returns are aggregated into a fixed-width 1D representation, decoupling runtime from point count. A Height Fusion Block fuses modalities, a lightweight GNN propagates depth globally, and a training-only confidence decoder stabilizes learning with zero test-time cost. We mitigate stripe artifacts via simple augmentations and quantify them using the Vertical-Horizontal Gradient Ratio (VHGR). On nuScenes, compared to recent state-of-the-art methods, JustDepth maintains accuracy while reducing inference time by 39.7x and stripe artifacts by 66% as measured by VHGR.

Objective: We evaluated whether metric 3D geometry of neurosurgical operative exposure can be recovered from standard monocular operating-microscope images combined with microscope pose data. Methods: In a phantom-based laboratory study, two aneurysm training phantoms were imaged with a ZEISS Pentero 800 microscope integrated with Brainlab Cranial Navigation. Microscope images from the standard composite video output were stored with synchronous microscope poses. After intrinsic and extrinsic calibration, depth was estimated with the pretrained Depth Anything 3 model without task-specific fine-tuning. Fused point clouds were converted to meshes using Poisson surface reconstruction. Reconstructions were compared with reference surfaces from structured-light scanning and fine-slice CT. Results: For phantom A, representing a deeper surgical corridor, reconstruction accuracy ranged from 1.95 $\pm$ 1.70 mm to 2.33 $\pm$ 2.15 mm. For phantom B, representing a directly exposed surface, accuracy ranged from 1.02 $\pm$ 0.93 mm to 1.52 $\pm$ 1.21 mm. Larger image sets mainly improved completeness, while accuracy remained within a narrower range. Corridor analysis showed preservation of overall geometry with local deviations in incompletely reconstructed regions. Conclusions: Standard monocular microscope images combined with navigation-derived pose data can reconstruct millimeter-range 3D surfaces using a foundation-model-based pipeline. These results show technical feasibility in a controlled phantom setting and support further development toward objective quantification of operative exposure, image fusion, and characterization of working spaces for future surgical instrumentation.

Recent geometric foundation models (e.g., Metric3D, Depth Anything and UniDepth) have substantially improved monocular depth estimation (MDE) in both cross-scene generalization and metric-scale prediction, yet these gains have not translated to tiny models. We bridge this gap with DepthART (Depth Anything Rethought for Tiny Models), which is a compact MDE model for on-device deployment across diverse scenes. We first identify two capacity-driven bottlenecks in tiny models: (i) overfitting to dataset-specific distribution bias and (ii) unstable metric adaptation under camera shift, where full fine-tuning easily damages transferable geometry. Accordingly, DepthART combines two simple but effective strategies: a bias-resistant data sampling scheme to reduce distribution bias under the same training budget, and a camera-conditioned fine-tuning protocol that freezes the distilled encoder and adjusts metric scale conditioned on intrinsics while better preserving cross-dataset generalization. Across datasets, DepthART consistently surpasses previous tiny baselines in both zero-shot generalization and metric accuracy (e.g., zero-shot $δ_1$=0.964 for DepthART-S on NYUD v2), and in some cases approaches heavy models. We further provide a scalable model family, with DepthART-S reaching 347/245 FPS (strict FP32) on an RTX A6000 at $224^2/448^2$, 102 FPS (TF32) on a Orin NX 8GB, and over 15 FPS (FP32) on a Jetson Nano 4GB.

Precise metric depth estimation is fundamental for autonomous robot navigation, yet monocular systems inherently suffer from scale ambiguity and scale drift. While recent recurrent flow-based SLAM systems have demonstrated state-of-the-art robustness, they remain scale-ambiguous. In this paper, we propose Metric-DROID, an end-to-end recurrent architecture that anchors visual SLAM to physical reality by integrating proprioceptive odometry. Our framework introduces the following innovations: (1) A LSTM Update Operator that encodes high-frequency odometry sequences into spatial feature maps, providing a persistent metric bias for iterative refinement. (2) An Uncertainty-Aware Metric Backend ($BA_{odom}$) that treats odometry as a geometric anchor with learned heteroscedastic covariance. By regressing a time-varying metric uncertainty $Σ_{o}$, our system intelligently balances visual re-projection and metric translation residuals, effectively mitigating the impact of wheel-slip and sensor noise. (3) We further propose a selective residual fine-tuning strategy to preserve pre-trained geometric priors while enabling zero-shot metric alignment.

Monocular depth foundation models have demonstrated remarkable generalization capabilities across diverse environments. However, they continue to struggle with metric depth estimation in diverse environments. This limitation stems from the inherent scale ambiguity of single-view inference, leading to misaligned scale predictions even when the relative geometry is accurate. Conversely, recent multi-view foundation models leverage cross-view cues to learn robust scene-level geometry and consistent scale. Yet, these benefits typically vanish during single-image inference, as the absence of explicit geometric constraints causes performance to degrade. To bridge this gap, we propose a novel framework that transfers the scale-aware geometric priors of multi-view models into monocular depth foundation models. Specifically, we introduce an Epipolar Distillation (EpiDistill), an approach utilizing Rectified Stereo Tokens, which enables the single-view prediction model to retain epipolar attention patterns and maintain geometric consistency without requiring multi-view inputs at inference. Experimental results demonstrate that our method significantly improves zero-shot metric depth estimation, particularly on challenging datasets like ETH3D and DIODE where scale alignment is critical. Furthermore, our approach is model-agnostic, consistently boosting the performance of state-of-the-art ViT-based models, including UniDepthV2 and DepthPro.

We present X-lens, a compact feed-forward model for metric depth estimation from a variable number of calibrated fisheye and pinhole views. To support real-time downstream perception, X-lens is built around a geometry-aware heterogeneous camera formulation with two key components. Learnable calibration tokens provide a coarse alignment between fisheye and pinhole projective spaces, while a Jacobian-parameterized distortion bias injected into cross-attention models local projection changes and promotes cross-camera consistency, enabling robust generalization with only 0.04B parameters and up to 41 FPS. The model predicts dense depth together with a global metric scale, avoiding auxiliary reconstruction targets that increase computation and optimization complexity. To learn such cross-camera generalization at scale and depth, X-lens is trained on multiple public datasets and OmniScene, our newly released large-scale synthetic dataset containing approximately 266K synchronized six-view frames, 1.7M individual images, and 103 indoor and outdoor scenes. Extensive experiments on both real-world and synthetic indoor and outdoor datasets demonstrate superior heterogeneous-camera metric depth accuracy, reducing AbsRel by 25.4% on OmniScene-Full over the strongest baseline while using 88.9% fewer parameters, with competitive performance on conventional fisheye-only and pinhole-only settings.

Single-shot fringe projection profilometry (FPP) networks that regress depth directly can exploit a shape-prior shortcut, recovering depth from object boundaries rather than from fringe phase. On a photorealistic synthetic benchmark (15,600 fringe images, 50 objects at 1.5-2.1 m standoff), the best such UNet baseline plateaus at 14.54 mm object mean absolute error (MAE), and neither more data nor more capacity removes the shortcut, because neither changes the hypothesis space the optimizer searches. We introduce PhiCalNet, which outputs a wrapped-phase representation $(\sinφ, \cosφ)$ and maps it to depth through a fixed differentiable calibration layer, removing the shape-prior solution architecturally rather than by a loss penalty. Because the single-shot mapping is non-injective without fringe order, PhiCalNet takes the fringe order as auxiliary input, an assumption a sensitivity analysis shows tolerates realistic decoding error; a physics-informed (PINN) baseline with the same physics as a soft penalty yields no gain, isolating the architectural choice as the operative factor. PhiCalNet reduces object MAE 3.3x to 4.46 mm, its residual confined to 0.103% of pixels at the $\pmπ$ wrap discontinuity, and a three-frame extension reaches 1.16 mm. Two checks agree: interpretability makes phase the most decodable internal feature, and pixel-wise conformal uncertainty quantification, to our knowledge the first for FPP, localizes error at the same discontinuity, where rejecting the top 5% of pixels by snapshot disagreement cuts root-mean-square error by 64% versus 3.5% for the baseline.

A central challenge in image-goal UAV navigation under Global Navigation Satellite System (GNSS) denial is estimating metric distance and heading between current and goal views. Dense pairwise geometry models capture relative scene structure, but without a calibrated metric scale, they cannot directly provide reliable distance estimates for navigation. Although global scale calibration corrects the dominant scale bias, the remaining errors vary systematically with distance. In this paper, Range-Aware Scale Recovery (RASR) is proposed, which complements global scale calibration with range-aware residual correction. RASR encodes pairwise geometry extracted by a frozen Matching And Stereo 3D Reconstruction (MASt3R) backbone as a compact descriptor and separates the scale-recovery core from task-specific command calibration. On the official online evaluation of the UAVs in Multimedia 2026 PairUAV challenge, RASR achieved a total error of 0.003189, achieving a lower total error than global scale calibration alone. The results demonstrate that range-aware residual correction improves metric distance estimation beyond global scale calibration. Code and materials are available at https://github.com/lht-research/rasr-pairuav.

Monocular depth foundations predict domain-general relative depth but lack absolute scale; a handful of sparse metric anchors from a range sensor can calibrate them to metric depth, an attractive alternative to metric-supervised training. Existing sparse-anchor calibration methods, however, assume the anchors are clean, whereas real sensors produce outliers that are present with the wrong value -- time-of-flight multipath, mixed pixels -- not merely missing. We show that the established residual-on-CFA calibration recipe collapses under such outliers, and that the strongest publicly deployed method, VI-Depth, has a structural multipath blind spot: robust to missing anchors, it falls behind an unprotected baseline on three of four datasets when anchors are present but wrong. We propose Multipath-Robust Anchor Calibration (MRAC), a parameter-free, inference-time wrapper that gates anchors by foundation consistency -- a Theil--Sen fit and a median-absolute-deviation test against the foundation's own relative-depth ordering -- before a single call to the calibration head. MRAC adds no learned parameters, runs its selection in $\approx 50\,μ$s on CPU, and serves anchor budgets $K \in [5,200]$ from one checkpoint. On a $320$-cell benchmark with a same-backbone, same-architecture control, MRAC strictly wins $84\%$ of same-backbone cells across all four outlier families and, against VI-Depth, wins all twelve corrupted multipath cells and all sixteen KITTI cells, reducing KITTI multipath AbsRel by $3.2\times$ ($0.489$ to $0.151$) at zero retraining.

Dual-pixel (DP) imaging enables metric depth estimation from a single camera using sub-aperture disparity. However, the extremely small effective baseline limits disparity observability, leading to structural degradation and depth failure in textureless, low-contrast, or downsampled regions. Existing DP-based methods rely primarily on local disparity cues and therefore become unreliable when disparity signals are weak or ambiguous. To address this limitation, we propose \emph{FoundDP}, a unified framework that integrates metric DP depth with global structural priors from a monocular depth foundation model. Our method preserves metric scale through DP-derived depth and leverages Vision Transformer (ViT) features to restore structural consistency in weak-disparity regions. To ensure reliable metric guidance under DP imaging conditions, we identify and mitigate ViT representation degradation induced by DP defocus blur via ViT feature alignment, enabling stable metric-guided depth estimation. Extensive experiments on synthetic and real-world DP benchmarks show that FoundDP delivers superior performance, with consistent gains in structural fidelity and metric accuracy, especially under reduced disparity observability. Code will be available at: https://github.com/EchoLighting/FoundDP

Dense depth estimation for autonomous driving faces a geometry-scale conflict: depth foundation models deliver pixel-aligned dense visual geometry without reliable metric scale, while projected LiDAR provides metric anchors that are sparse, noisy, and misaligned with image structures. Existing sparse-prompted methods incorporate LiDAR by regenerating depth from scratch, overriding the foundation model's coherent geometry and producing structural artifacts on visually continuous surfaces. Our key insight is that foundation models already capture geometrically coherent relative depth; no additional surface structure learning is required-only a per-pixel scale factor mapping relative geometry to metric coordinates. Based on this, we propose DrivingDepth, which treats sparse LiDAR as geometric prompts that locally calibrate a frozen foundation prior through residual pixel-wise scale correction, preserving dense visual geometry by construction. On nuScenes with 4-frame surround-view input, DrivingDepth achieves an AbsRel of 11.19 and an EdgeCR of 5.741, outperforming MapAnything (11.99/1.914) by simultaneously delivering SOTA metric accuracy and geometric consistency.

This paper addresses the problem of monocular metric depth estimation in aerial UAV imagery. Although recent data-driven methods have achieved remarkable progress in ground-level scenarios, models trained primarily on street-view and indoor datasets exhibit significant domain gaps when applied to aerial viewpoints. To tackle these challenges, we introduce AerialMetric, a benchmark dataset designed to evaluate and facilitate the adaptation of monocular metric depth estimation under UAV aerial viewpoints. The dataset consists of four complementary subsets collected from different sources, jointly covering real-world photogrammetry data, controlled aerial acquisition settings, photorealistic synthetic scenes, and in-the-wild Internet imagery. Totally, AerialMetric provides 52K real-world and 16K synthetic image-depth pairs with reliable metric ground truth. Based on this dataset, we conduct systematic evaluations of existing state-of-the-art models under aerial settings and investigate the impact of viewpoint, altitude, and camera parameters on metric depth prediction. In addition, by fine-tuning representative metric depth model on our dataset, we establish a comprehensive aerial benchmark and achieve state-of-the-art performance across diverse aerial imagery. Our dataset, code, and model weight are publicly available at https://kuieless.github.io/AerialMetric-ECCV2026-page/.

Consumer depth sensors such as the LiDAR scanner on recent iPhones provide metric range, but their useful range is short and their returns are sparse. We present DH-Active, a lightweight, training-free geometry back-end that treats the sensor as a metric ruler rather than the sole source of depth. Near-field returns anchor the metric relative pose of two views through PnP; visually trackable samples without a valid depth return are then triangulated under that pose. A parallax/reprojection gate abstains wherever the geometry is ill-conditioned, leaving an explicit hole and a selective score instead of forcing an estimate. The measured core front end, including spiral sampling, sparse back-projection, and hole taxonomy but excluding preprocessing and multi-view recovery, runs at 1.11 ms median latency on CPU (OpenCV using 14 threads), about 38 times faster than a DINOv2-L visual branch on GPU in our timing setup. Across two iPhone captures and the public TUM RGB-D and ARKitScenes benchmarks, held-out depth is recovered at 1.4 to 6.7 percent median relative error. In a controlled ARKitScenes protocol that uses only returns within 2 m to set scale and an independent laser scan as ground truth, DH-Active achieves 64.2 percent scene-median coverage of evaluable far-field candidates at 13.4 percent scene-median relative error; direct triangulation from the device trajectory is not usable. We also report the alternatives that failed in our tests: single-frame defocus, classical focus-stack depth, defocus-LiDAR fusion, point-to-point ICP over a good visual-inertial track, and attention-to-holes resampling. A 1.26 B learned model remains more accurate after oracle scale alignment. The contribution here is narrower: metric sparse depth, explicit abstention, zero learned parameters, and near-millisecond CPU cost.

Modern autonomous driving depends on accurate metric 3D understanding for perception, reconstruction, and planning, which in turn requires reliable multi-camera depth prediction. However, the outward-facing nature of vehicle-mounted surround-view camera rigs inherently limits visual overlap across views, challenging the correspondence-based assumptions that underpin conventional multi-view geometry. To bridge this gap, we present SurroundNEXO, named after the Spanish word nexo for a geometric link, a low-overlap multi-camera metric depth framework that grounds cross-view reasoning in ego-centric geometry rather than dense visual correspondences. Instead of directly enforcing early global fusion, SurroundNEXO first assigns image tokens globally comparable ego-frame viewing directions through Ego-Ray Positional Encoding, then uses sparse LiDAR measurements as metric anchors to propagate absolute scale cues, and finally expands feature interaction progressively from view-local modeling to decomposed spatio-temporal reasoning and global integration. This design enables metric-scale depth prediction with improved spatial consistency across weakly overlapping cameras. Across low-overlap autonomous driving benchmarks, including NuScenes, Waymo and DDAD, SurroundNEXO reduces single-view error by 33.2%, improves cross-view consistency by 10.5%, and enhances metric reconstruction quality by 25.6% compared with SOTA methods. It further remains robust under extremely sparse depth prompts and exhibits strong zero-shot generalization to unseen camera layouts.

While monocular depth estimation has achieved significant progress, achieving generalized metric depth estimation for both narrow field-of-view (FoV) perspectives and $360^\circ$ panoramas remains an unsolved challenge. Existing methods are often tailored to specific camera types and struggle to produce accurate metric depth that generalizes across diverse settings. This limitation stems from two key challenges: the inherent geometric discrepancy between perspective and panoramic cameras, and the scarcity of panoramic training data with metric annotations. In this work, we introduce DepthMaster, a unified metric depth estimation framework. Rather than employing specialized networks to learn spherical distortions, we reformulate the problem by decomposing panoramic images into overlapping perspective patches. Crucially, distinct from prior projection-based methods that rely on ad-hoc architectural modifications to handle boundaries, we introduce a novel Correspondence Consistency Loss (CCL) and inject virtual projection cameras as geometric priors, allowing us to seamlessly stitch the patches while avoiding specialized operators and keeping the backbone largely compatible with standard Transformer designs. This strategy also resolves the geometric differences by unifying all inputs into a canonical perspective representation, and effectively circumvents data scarcity by directly unlocking powerful metric priors from vast perspective datasets. Trained on a mixed dataset that contains only one panorama dataset, DepthMaster achieves state-of-the-art zero-shot performance on 13 diverse datasets, outperforming not only universal methods but also leading specialist models in both perspective and panoramic domains.

In fringe projection profilometry (FPP), depth is commonly recovered by fitting a phase-to-depth relation independently at each camera pixel. Although such pixel-wise calibration achieves high local accuracy, neighboring pixels can acquire markedly different calibration functions even when they observe the same smooth surface, producing spatially inconsistent geometry and structured surface artifacts. We propose a spatially coupled phase-depth transformation in which all pixels share a single low-dimensional mapping-global phase scalars combined with affine spatial terms on the undistorted reference-camera grid-rather than independent per-pixel fits, optionally augmented by a bounded, spatially smooth correction field. We further introduce a native-grid pairing scheme that constructs phase-depth calibration pairs directly on the reference-camera grid: when depth supervision comes from a rectified active-stereo pipeline, planes are fitted in stereo 3D and sampled back onto the camera grid along native rays, so the phase maps are never rectified. On a dental target with high-resolution scanner ground truth, the proposed model attains point-to-surface RMSE comparable to an active-stereo reference (about 12μm aggregate) while substantially improving spatial coherence over pixel-wise polynomial and rational calibration, and reduces the runtime mapping to a few element-wise operations per pixel with negligible parameter storage.

Natural environments present a complex challenge to robotics perception systems. Current models, particularly vision foundation models, are largely trained on structured, urban environments leading to weaknesses in their perception for field robotics tasks. We showcase the limitations of current models using our recently released WildCross benchmark, a new cross-modal benchmark for place recognition and metric depth estimation in large-scale natural environments. WildCross comprises over 476K sequential RGB frames with semi-dense depth and surface normal annotations, each aligned with accurate 6DoF pose and synchronized dense lidar submaps. In this work, we provide an expanded analysis of the benchmark results from the recent WildCross benchmark, with particular emphasis on expanded metric depth estimation experiments. Access to the code repository and dataset for this work can be found at https://csiro-robotics.github.io/WildCross.

Feed-forward 3D reconstruction models have recently shown strong generalization across diverse scenes, yet most of them recover geometry only up to an unknown global scale. This scale ambiguity limits their use in applications that require metric understanding of the environment. Existing metric reconstruction methods commonly rely on large-scale metric annotations or accurate camera calibration, both of which are costly or unreliable in many real-world settings. We propose a satellite-guided framework for resolving scale ambiguity in feed-forward 3D reconstruction. The key idea is to use readily available satellite imagery as a global metric reference. Given a coarse camera pose, our method retrieves a local satellite patch and integrates it with a feed-forward reconstruction backbone through bidirectional cross-view interaction. By enforcing consistency between the reconstructed scene and the satellite reference, the model infers absolute scale, refines scene geometry, and estimates camera pose in a metric coordinate frame. Experiments on KITTI, nuScenes, and Oxford RobotCar show consistent improvements in metric depth estimation, multi-view point-cloud reconstruction, and cross-view camera localization, while preserving strong generalization across datasets and geographic regions.

We introduce D^3S Consensus, a physics-based, closed-form algorithm that unifies depth-from-defocus (DfD) and stereo to achieve highly accurate depth estimation throughout an extended working range beyond the depth-of-field (DoF) of cameras. Given a pair of dual-defocus stereo images, the method estimates an overdetermined set of depth using a novel DfD theory, Dual Differential Defocus (D^3), and (S)tereo in a coupled fashion. It then picks the most confident depth prediction from the set by enforcing consensus between these physically independent cues to reject unreliable estimates. Analysis shows that D^3S achieves a comparable working range under the same error tolerance with 10x smaller baseline than previous triangulation-based depth estimation systems. This enables compact passive binocular rangefinders with substantially smaller form factors than conventional stereo and DfD designs. We demonstrate the first D^3S prototype with only 4 mm baseline and 12 mm EFL. It generates up to 900 x 1800-pixel depth maps with 1-cm mean absolute error over 0.3-1.64 m from a snapshot acquisition. This has surpassed the reported accuracy of certain commercially available stereo cameras with much larger form factors.

Metric scale monocular geometry estimation has seen significant progress through large-scale data aggregation, yet current foundation models suffer from a persistent ''scale-collapse'' phenomenon: distant landmarks and vast landscapes are metrically underestimated. We hypothesize that this performance gap stems from a training data bottleneck, where existing metric-scale datasets are hardware-constrained to homogenous vehicle-captured LiDAR or short-range indoor scans, or consist of synthetic data that lacks the semantic complexity of the physical world. To bridge this gap, we curate a new metrically-grounded, in-the-wild dataset that we call MetricScenes, gathered from a variety of sources including Internet photo collections and stereo imagery. We estimate camera poses and initial depth maps for each scene using off-the-shelf methods, and recover absolute scale from geo-tagged metadata as well as known stereo camera baselines. We also improve the quality of depth maps derived from MetricScenes via a new two-stage Poisson completion method. Fine-tuning MoGe-2 on our dataset significantly mitigates scale-collapse and achieves superior metric accuracy in unconstrained, open-domain scenes while maintaining state-of-the-art performance on standard benchmarks.

This work presents the Large Depth Completion Model (LDCM), a simple, effective, and robust framework for single-view metric depth estimation with sparse observations. Without relying on complex architectural designs, LDCM generates metric-accurate dense depth maps using a transformer. It outperforms existing approaches across diverse datasets and sparse observations. We achieve this from two key perspectives: (1) leveraging existing monocular foundation models to improve the quality of sparse depth inputs, and (2) reformulating training objectives to better capture geometric structure and metric consistency. Specifically, a Poisson-based depth initialization strategy is first introduced to generate a uniform coarse dense depth map from diverse sparse observations, providing a strong structural prior for the network. Regarding the training objective, we replace the conventional depth head with a point map head that regresses per-pixel 3D coordinates in camera space, enabling the model to directly learn the underlying 3D scene structure instead of performing pixel-wise depth map restoration. Moreover, this design eliminates the need for camera intrinsic parameters, allowing LDCM to naturally produce metric-scaled 3D point maps. Extensive experiments demonstrate that LDCM consistently outperforms state-of-the-art methods across multiple benchmarks and varying sparsity levels in both depth completion and point map estimation, showcasing its effectiveness and strong generalization to unseen data distributions.

Spatial understanding of the physical world from 2D visual inputs hinges on two complementary forms of geometric knowledge: holistic 3D structural perception and fine-grained metric scale estimation. Existing multimodal large language models (MLLMs) typically address only one facet, ingesting either depth maps or point clouds as additional model inputs, which incurs substantial computational overhead and inherits the generalization limitations of upstream prediction models. We propose GAMSI, a dual-pathway Geometry-Aware MLLM for Spatial Intelligence that takes only RGB images as input while internalizing both forms of geometric prior within a unified autoregressive backbone. Specifically, we introduce Metric-Structure Decoupled Queries (MSDQ) which employ two groups of learnable queries to respectively extract dense metric signals and sparse structural cues from the shared visual context, with a task-decoupled attention mask further preventing the two pathways from contaminating each other. Building on this, an Expert-Guided Visual Grounding (EVG) module projects the aggregated cues back to frame-level visual features and aligns them with vision foundation models, which serve purely as training-time supervision, rather than as model inputs. We further build a multi-task spatial instruction-tuning dataset (MTS) comprising 152{,}776 samples spanning 13 task types and three visual modalities, consolidated from six public datasets. Trained with a two-stage curriculum, GAMSI achieves state-of-the-art performance on seven spatial intelligence benchmarks.