Rgbt

RGB-Thermal (RGB-T) salient object detection leverages complementary cues from visible and thermal modalities to improve robustness in challenging environments. However, in real-world scenarios, the reliability of each modality is inherently unstable: RGB images degrade under low illumination, motion blur, and noise, while thermal imagery often suffers from contrast compression and sensor artifacts. Such degradation introduces unreliable perceptual evidence that can mislead cross-modal fusion and significantly deteriorate detection performance. To address this challenge, we propose RA-SOD, a reliability-aware RGB-T salient object detection framework that explicitly models modality reliability and integrates it into feature learning and cross-modal fusion. First, we introduce a reliability-conditioned representation that adaptively compensates degraded modality features while preserving structural cues. Second, an uncertainty-guided dual-stream refinement strategy progressively corrects cross-modal representations while suppressing unreliable evidence. Finally, we propose a pixel-wise modality competition mechanism that dynamically selects modality cues according to spatial reliability for fine-grained fusion. Extensive experiments on four benchmarks (VT821, VT1000, VT5000, and VT-IMAG) demonstrate that RA-SOD achieves state-of-the-art performance and exhibits strong robustness under severe modality degradation. Code and models are available at https://github.com/zaoxienian/RA-SOD.

Moving-object perception must decide which image regions correspond to real motion and keep every instance identified over time. Methods that read motion from appearance, optical flow, or estimated trajectories lose that evidence under poor illumination, adverse weather, reflections, and occlusion. Radar is a natural remedy because it measures radial velocity directly instead of inferring it from photometric correspondence. However, existing benchmarks do not jointly provide radar measurements, dense moving-instance masks, and temporally consistent identities for surveillance. We therefore introduce RGBTR-Motion, a synchronized and calibrated fixed-camera benchmark that pairs RGB, thermal, and radar streams with dense instance masks and temporally consistent identities across diverse surveillance scenes. We also develop SAM-Radar, an RGB, thermal, and radar-based segmentation and tracking framework built on SAM 3. SAM-Radar's radar-aware detector fuses calibrated RGBT features with radar returns that are grounded at their projected image locations, and motion supervision, implemented as foreground classification of those projected returns, teaches the detector to reject clutter without any text prompt. The tracker associates accepted radar returns with individual trajectories and uses them as physical evidence that a visually degraded target remains present. This allows it to bridge short periods of low visibility or occlusion and reconnect a reappearing target to its existing identity instead of starting a new track. SAM-Radar attains 0.7027 IoU and 0.8090 F1-50, and raises MOTA, HOTA, and IDF1 by 0.2977, 0.1603, and 0.2857 over the strongest competing values.

RGB-Event Video Person Re-Identification (RE-VReID) aims to retrieve specific person across non-overlapping cameras with complementary RGB videos and event streams. However, existing methods often decouple spatial and temporal modeling, which limits their interaction. In addition, global-level RGB-Event fusion fails to fully exploit fine-grained discriminative cues. To address these issues, we propose Paths, a unified framework with spatio-temporal modeling and hierarchical multi-modal fusion for RE-VReID. Specifically, we first design a Memory-Augmented Backbone (MAB) to maintain modality-specific identity prototypes for stable intra-modal representation learning. Then, we propose a Prompt-aware Spatio-temporal Transformer (PST) to jointly model spatial and temporal cues within a unified Transformer. Finally, we introduce a Hierarchical Multi-modal Fusion (HMF) to integrate RGB and event features at global and local levels. With these modules, our framework can learn robust and discriminative representations for RE-VReID. Extensive experiments on three public RE-VReID benchmarks including EvReID, MARS and iLIDS-VID, demonstrate the effectiveness of our proposed method. The code is available at https://github.com/Reflection0427/Paths.

RGB-Thermal (RGBT) object detection enables robust perception in complex scenes by leveraging the complementary strengths of visible textures and thermal cues. However, existing methods mainly rely on dense cross-modal interactions over full-resolution features, which inevitably introduce background interference and hinder the learning of target-relevant representations. In this paper, we propose the Prototype HyperGraph Fusion Network (ProtoHGF-Net), a novel framework that redefines cross-modal fusion as prototype-level semantic interaction rather than the dense cross-modal interaction paradigm. Specifically, we design Prototype HyperGraph Fusion to perform cross-modal interaction in a compact prototype-level semantic space. This design enables more selective fusion among target-relevant prototypes. To support this prototype-level fusion, we propose Teacher-Mask Calibration Distillation, which calibrates modality features before fusion using modality-specific teachers and target-aware masks. This strategy suppresses backgrou- nd-dominant responses and produces more target-focused features. Extensive experiments on DroneVehicle, DVTOD, and FLIR demonstrate that ProtoHGF-Net achieves state-of-the-art performance with 85.9% $mAP_{50}$, 88.2% $mAP_{50}$, and 79.1% $mAP_{50}$, respectively. Our code is available at \href{https://github.com/ZiMo-Chen/ProtoHGF}{GitHub}.

Deep learning-driven representations such as neural radiance fields (NeRFs) and 3D Gaussian splatting (3DGS) have revolutionized the field of dynamic 3D scene reconstruction with improved visual precision and scalability. However, the reconstruction of fast-moving objects remains a challenge; existing methods based on conventional frame-based videos often struggle in scenarios such as sports events and animal videography. We propose an event-RGB fusion Gaussian splatting (ERF-GS) framework that integrates event information into both optimization and densification stages of the Gaussian splatting pipeline, taking advantage of novel event sensors with high frame-rate. Unlike many other event-assisted scene reconstruction methods, ERF-GS was developed using realistic simulation settings and realizes event-based learning detached from RGB inputs. This design enables its application beyond straightforward synthetic data into the realm of natural video with complex layout, low frame rates and severe motion blur. Our experiments show that ERF-GS outperforms both the 4DGS baseline and the concurrent E-D3DGS on different variants of the Neu3D and Nvidia datasets which include blurry RGB frames and disjoint RGB-event viewpoints. Our code is available at https://github.com/andrewbxy/ERF-GS.

Despite remarkable progress in reflection removal, current methods primarily exploit static image priors from a single frame and still suffer from severe residual artifacts due to the inherent ambiguity between the reflection and transmission layers. In this paper, we propose leveraging event signals to break this ambiguity. By employing event cameras to capture micro-dynamics, we reveal the differential motion between these two layers. We thereby present a novel event-driven reflection removal network, EvReflection, that utilizes these dynamic cues for layer separation. Specifically, we design a Micro-Dynamics Decoupler to disentangle layer-specific motions from event streams as priors, which then guide a Parallax-Attention Rectifier to cleanly remove artifacts from the RGB image. Furthermore, to address data scarcity, we develop a parallax-aware simulation pipeline and construct the EVR$^2$ benchmark dataset, the first real-world dataset for this task. Extensive experiments demonstrate that EvReflection achieves state-of-the-art performance on both synthetic and real-world benchmarks, surpassing the best competing method by more than 1.6 dB and 1.2 dB in PSNR, respectively. The code, dataset, and pre-trained models are available at https://github.com/JiaxiaoWang/EvReflection.

Existing RGBT trackers typically employ fusion functions with fixed parameters across different targets and scenarios. Although dynamic-architecture methods improve fusion flexibility by selecting among predefined operations, they still cannot adapt the fusion parameters to the evolving target state. To address these issues, we propose a Parameter-Dynamic Adaptive Fusion and Calibration Network (PAFCNet) for RGBT tracking. PAFCNet dynamically generates target-conditioned parameters for multimodal fusion and temporal calibration, enabling the tracking process to adapt to target appearance variations and modality quality fluctuations. Specifically, we introduce a Target-Adaptive Hypernetwork (TA-HyperNet) that leverages template representations, which preserve stable target identity and recent appearance changes with less background interference, to generate target-conditioned parameters for subsequent fusion and calibration. Based on TA-HyperNet, we design a target-aware parameter-dynamic fusion module that uses the generated parameters to modulate the fusion process. This enables the fusion module to adapt to changes in target appearance and complex scene conditions. Furthermore, since spatio-temporal information propagation may accumulate tracking noise, we propose a dynamic spatio-temporal calibration module that employs TA-HyperNet to generate calibration parameters for spatio-temporal tokens. By dynamically calibrating historical information before propagation, the module improves the reliability of temporal representations. Experimental results demonstrate that PAFCNet achieves competitive performance on multiple RGBT tracking benchmarks.

State-of-the-art RGB-Event detectors improve the detection of small, fast-moving objects by combining complementary features from RGB and Event data, yet they typically fuse the two modalities into a unified representation for both localization and classification. Such a task-symmetric design is inconsistent with the intuition that the two modalities should play different roles according to their task-specific strengths. To examine this issue, we conduct a modality-specific evaluation and find that the relative advantage of the two modalities reverses across tasks: Event data are substantially more effective for class-agnostic localization, whereas RGB data provide stronger category evidence within localized target regions. Motivated by this task-dependent asymmetry, we propose an Asymmetric Event-RGB Object Detection Transformer (AERODet). During class-agnostic localization, Scale-wise Uncertainty-aware Reliability Estimation (SURE) calculates the relative reliability of the two modalities from their objectness response heatmaps and accordingly calibrates their contributions when the decoder aggregates multimodal features. Once the candidate boxes are obtained, Task-Decoupled Semantic Refinement (TDSR) decouples classification from localization and uses RGB RoI features for fine-grained classification. Extensive experiments on FRED and NeRDD demonstrate that AERODet achieves state-of-the-art performance. In particular, it surpasses the strongest RGB-Event baseline by 10.7 mAP points on the FRED challenging split.

Missing modalities in RGBT tracking often lead to incomplete and unstable multimodal feature representations that greatly degrade the performance. Existing methods typically attempt to recover missing modalities from available ones, but the quality of data generated in challenging scenarios might be unsatisfactory. In addition, current approaches exhibit limited flexibility in processing both missing and complete data. To overcome these limitations, we propose a Spatio-temporal Conditional Denoising Transformer (SCDT), which integrates the spatial cues and the temporal context to adaptively perform information reconstruction of missing modalities and feature enhancement of weak modalities in a unified framework, for robust modality-missing RGBT tracking. In particular, SCDT leverages the short-term temporal cues from recent historical frames to capture the fine-grained temporal correlations and the long-term temporal cues encoding modality evolution to capture the global context. By jointly exploiting long short-term temporal contexts as the conditions, SCDT progressively guides noisy features of available modalities to learn reliable and temporally consistent multimodal representations. Furthermore, SCDT introduces a noisemodulated adaptation mechanism that dynamically adjusts its behavior according to the modal availability, enabling a single framework to unify feature learning under both modality-missing and complete scenarios without changing the architecture or parameters. Extensive experiments on three public benchmark datasets demonstrate that our method consistently outperforms state-of-the-art methods. The code is available here.

Dynamic RGBT (DRGBT) tracking aims to continuously localize a target when the available sensing modalities and observation platforms vary over time. Compared with conventional RGBT tracking with fixed RGBT inputs and a fixed observation platform, DRGBT tracking is more consistent with real-world collaborative perception systems, where targets may be observed by heterogeneous sensors from different viewpoints. However, existing benchmarks are still insufficient for systematically evaluating tracker robustness under real dynamic modality variations and cross-platform transitions. To address this limitation, we make the following contributions. 1) We construct DRGBT-1K, a large-scale high-quality benchmark for DRGBT tracking. It contains 1,045 sequences captured entirely in real-world scenarios and 795K RGBT frame pairs collected using UAVs and handheld RGBT devices, encompassing diverse real-world scenes, pronounced viewpoint changes, modality variations, and target appearance discontinuities. 2) We provide comprehensive annotations for fine-grained evaluation, including dense bounding boxes, target category labels, challenge attributes, frame-level modality labels and platform labels. DRGBT-1K covers 24 target categories, more than 15 scene types and 15 challenge attributes. 3) We establish a comprehensive benchmark by evaluating 20 representative multimodal tracking methods, including conventional RGBT trackers, modality-missing RGBT trackers, and DRGBT trackers under a unified evaluation protocol. 4) We release an unaligned version of DRGBT-1K and derive UGVT-1K to support broader research on unaligned multimodal tracking and UAV-ground collaborative tracking. 5) We develop an online evaluation platform for DRGBT-1K and provide a leaderboard that collects all methods evaluated on this benchmark.

Video deraining aims to recover clean visual content from rainy videos for reliable perception under adverse weather. Existing methods mainly rely on RGB sequences and temporal redundancy, but RGB-only restoration remains ambiguous in dynamic rainy scenes, where rain streaks, textures, boundaries, motion, and occlusions may share similar visual patterns. Event cameras provide complementary motion-sensitive cues with high temporal resolution, but event streams also contain sensor noise and background-triggered responses, so direct RGB-Event fusion may introduce cross-modal interference. To address this issue, we propose RainDancer, a progressive RGB-Event video deraining framework based on a decompose-before-interact paradigm. The core idea is to separate rain and background components within each modality before cross-modal interaction. In the RGB branch, frame features are progressively decomposed into rain and background representations. In the event branch, a rain-oriented spiking neural network module captures sparse and bursty event dynamics associated with rain motion. Component-level fusion is then performed between semantically aligned representations for structure preservation and rain suppression. We further introduce event-domain supervision to regularize sparse event reconstruction, structural consistency, and gradient orientation. Experiments on synthetic and real RGB-Event video deraining datasets demonstrate superior quantitative performance, visual quality, and downstream perception robustness. Code is available at https://github.com/AE86-plus/RainDancer.

Intelligent Transportation Systems deployed on highways predominantly rely on conventional RGB cameras for traffic perception and vehicle tracking. However, highway environments present unique challenges: the absence of artificial lighting infrastructure, combined with high vehicle velocities, results in severely degraded perception performance under low-light conditions. Specifically, nighttime scenarios suffer from motion blur, insufficient exposure, and poor signal-to-noise ratios, which catastrophically impair the reliability of RGB-based sensing systems. To address these limitations, we propose a novel Joint Event-RGB Adaptive Tracking (JEAT) framework. Unlike existing multi-sensor trackers constrained by rigid, hard-coded prioritization, JEAT merges asynchronous event streams and RGB frames into a unified joint data association optimization. By employing an Adaptive Extended Kalman Filter to continuously estimate measurement noise via NIS statistics, the framework dynamically weights and fuses both modalities, optimally harnessing event streams during dark or high-speed motion while leveraging RGB frames under bright or static conditions. Furthermore, given the absence of publicly available datasets tailored for event-based highway perception with diverse environmental conditions, we present SEHN, a large-scale synthetic dataset generated using the CARLA simulator. Our dataset encompasses diverse environmental conditions (daytime, nighttime, nighttime with out artificial lighting) and varying traffic densities, providing synchronized RGB imagery and event streams to facilitate multi-modal fusion research. Our code and datasets will be available at https://github.com/haidongwang96/SEHN.

Fusing standard RGB frames with asynchronous event streams has emerged as a definitive paradigm for robust perception in degraded environments. Although unified backbones have recently gained traction in multi-modal vision, adapting them to the RGB-Event domain remains fundamentally challenging. Existing architectures either resort to decoupled dual encoders that double computational overhead, or adopt generic unified designs that fail to resolve implicit geometric parallax and cross-spectral aliasing under the extreme representational divide between dense intensity grids and sparse kinematic spikes. To transcend these bottlenecks, we present Evita, the first unified backbone specifically engineered for dedicated dense RGB-Event parsing. To achieve profound modal synergy, Evita explicitly embeds a suite of intrinsic co-learning modules directly into every encoder layer. Specifically, it features Geometric Parallax Rectification for adaptive spatial alignment, Harmonic Spectral Resonance for texture transfer exclusively in the complex frequency domain, and Transient Global Routing for event-driven asymmetric attention. To guarantee robust feature extraction against spatial misalignments and decouple representations from specific event encodings, we construct N-ImageNetV2 alongside a stochastic event representation mixing pretraining protocol, empowering the network to seamlessly accommodate arbitrary event formats in downstream tasks. Extensive evaluations across the DELIVER, DDD17, and DSEC benchmarks confirm that Evita establishes new state-of-the-art metrics while delivering a superior accuracy-latency trade-off for real-time multimodal perception.The code are publicly available at: https://github.com/chaineypung/Evita.

RGB-Thermal (RGBT) Video Object Detection (VOD) has gained significant attention because of the limitations of conventional RGB-based VOD methods under challenging conditions, such as low light, heavy fog, and adverse weather, etc. However, spatial misalignment commonly exists between RGBT image pairs. To address this, we propose a Dual-Correlation Hypergraph Network (DCHNet) that captures high-dimensional complementary information by explicitly modeling two types of correlations: temporal correlation across consecutive frames and spatial correlation from cross-modal features. Specifically, we first design a Patch-based Spatial Alignment Module (PSAM) to sequentially align the multimodal features at the local region level. Subsequently, we propose a Dual Hypergraph Fusion Module (DHFM), which constructs temporal and multimodal hypergraphs, respectively, to enhance object characteristic through dual-correlation learning. Furthermore, the field currently lacks a large-scale, scene-diverse benchmark dataset for comprehensive evaluation. Therefore, we construct DVT-VOD1000, a large-scale RGBT VOD dataset containing 1,000 video sequences with 103,464 RGBT image pairs. The dataset covers diverse scenarios, including campuses, parks, traffics, rural areas, night scenes, rainy weather, and snowy weather. Comprehensive experiments on VT-VOD50 and our DVT-VOD1000 demonstrate that DCHNet achieves state-of-the-art detection accuracy. The dataset and source code will be made publicly available on https://github.com/tzz-ahu/ to support academic research.

RGB-T detectors leverage the complementary strengths of visible and thermal infrared modalities, achieving robust performance under challenging conditions. Many of them resort to heavy dual backbones and exhaustive cross-modality fusion across the entire image, leading to impractically high computational costs. We observe that most image regions are smooth backgrounds (e.g., sky, ground) that can be easily handled by lightweight single-modality models. In light of this observation, we propose a sparse fusion mechanism for efficient RGB-T detection: first rapidly scanning the image to identify the proposals and then carefully examining the remaining sparse proposals via feature fusion. We propose a two-stage framework to instantiate this mechanism, which performs detection in two stages: 1) a lightweight and modality-specific detection stage that produces high-recall RoIs, and 2) a fusion-driven examination and refinement stage that filters out the false positives and refines the bounding boxes. This design enables the detector to adaptively allocate more computational resources to the potential foregrounds, improving the efficiency while ensuring detection accuracy. Extensive experiments show that our method achieves competitive performance with substantially fewer parameters and lower cost, while maintaining strong scalability to high-resolution images.

Event cameras capture sparse brightness changes with high temporal resolution and high dynamic range, compensating for the deficiencies of the conventional RGB frames. However, previous multi-modal fusion techniques typically fail to handle the inherent heterogeneity between RGB frames and event streams, thus easily leading to noise amplification or redundant feature integration during cross-modal fusion. In this paper, we propose a Cross-Modal information inTeraction transFormer, coined as CMTFormer, which hierarchically integrates RGB and event information to achieve efficient and stable multimodal collaboration. Specifically, we design a shallow-to-deep information interaction scheme. In the shallow stage, we present the Shallow Alignment Module (SAM) to achieve an efficient fusion of RGB and event low-level features, which mitigates attribute disparities and prevents noisy information. In the middle stage, we devise the Cross-modal Enhancement Module (CEM) that utilizes texture and edge information to produce mutually reinforced middle-level features. In the deep stage, we present the Learnable Deep Fusion Module (LDFM) which performs high-level information aggregation through learnable weights, thus enabling the network to adaptively fuse RGB and event clues. A Spatial Prior Module is further designed to utilize global spatial information to enhance localization accuracy. Extensive experiments are conducted on two prevalent event-based object detection benchmarks, i.e., DSEC-Detection and PKU-DAVIS-SOD. Our CMTFormer consistently surpasses the detection counterparts in both uni-modal and multi-modal settings, strongly demonstrating the effectiveness of our paradigm. Codes will be available upon publication.

Micro-expression recognition (MER) in realistic scenarios demands high temporal sensitivity and ecological validity, yet existing benchmarks are largely constrained to laboratory-controlled settings and rigid hardware-coupled sensing. We introduce CDER-SME, a cross-device Event-RGB dataset collected under a multi-level stress induction framework (cognitive and social) to elicit spontaneous emotional leakage. To enable reproducible acquisition with independent, decoupled sensors, we provide a hardware-agnostic alignment pipeline for temporal synchronization and landmark-guided spatial registration. CDER-SME adopts a three-tier structure with 92 subjects and 1,963 expert-annotated samples (Action Units and emotions), including 790 Event-RGB pairs and 210 high-fidelity aligned pairs. We further report a reproducible multimodal baseline, where cross-modal fusion improves performance over single-modality counterparts, supporting the complementarity of event dynamics and RGB cues. By removing the need for coaxial calibration, CDER-SME offers a practical benchmark for cross-device alignment and deployable Event-RGB MER in real-world affective intelligence.

Recent feed-forward 3D reconstruction methods have demonstrated strong performance and flexibility in efficient end-to-end scene geometry estimation from image streams. However, their reliance on visible-light appearance makes them vulnerable in dark and low-visibility environments, where RGB cues are severely degraded and geometric evidence becomes ambiguous. To address this challenge, we propose DarkVGGT, an RGB-T feed-forward geometry framework that uses physics-aware thermal modeling for robust 3D estimation in low-light scenes. DarkVGGT introduces two complementary modules. First, physics-inspired thermal factorization extracts emissive-dominant, geometry-consistent thermal cues while isolating sparse reflective residuals that may introduce geometric ambiguity. Second, geometry-shared thermal routing isolates modality-invariant geometric structures from thermal-specific patterns, selectively injecting reliability-aware structural guidance into the RGB stream. Together, these components enable accurate thermal-informed geometry estimation under degraded RGB conditions while largely preserving performance in well-lit environments. Experiments on low-visibility RGB-T benchmarks demonstrate consistent improvements in both depth and camera pose estimation over existing feed-forward geometry baselines.

First-person dynamic spatial reasoning requires models to track continuous motion and precise geometric structure, but the quadratic attention cost of Transformer-based Video-LLMs makes dense visual tokens computationally expensive. Existing token pruning paradigms predominantly rely on discrete static snapshots, failing to preserve the motion and geometric cues essential for reasoning. We propose Event Cascade Pruning (ECP), to our knowledge the first training-free framework that leverages the high-frequency motion cues from event cameras as a continuous event-guided motion prior to guide token selection. ECP combines three stages: Event-Triggered Causal Sampling to anchor motion-informative keyframes, Event-guided Motion Saliency Filtering to suppress event-inactive visual tokens, and Event-Attention Ranking Fusion to calibrate spatial attention with motion-salient dynamics. With 80% visual token reduction, ECP outperforms the full-token baseline (37.62% vs. 36.31%) while achieving 1.89x inference speedup and 52% GFLOPs reduction. We further introduce ESR-Real, the first real-world RGB-event benchmark for first-person spatial reasoning, where ECP improves accuracy by 2.68 percentage points over full-token baselines.

While RGB-Thermal crowd counting has shown promise, the paradigm faces critical limitations: RGB data raises privacy concerns in public surveillance, and multi-modal misalignment degrades fusion performance. We propose the first thermal-only framework specifically designed for privacy-conscious crowd counting, eliminating RGB dependency at inference time and substantially reducing the privacy exposure associated with continuous RGB capture in public surveillance deployments. To mitigate thermal ambiguity, we leverage depth-to-RGB diffusion models as a cross-modal bridge, extracting discriminative features that enhance thermal representations. Critically, we demonstrate that single-step LCM denoising yields features most faithful to the structural content of the depth conditioning signal, while multi-step approaches progressively decouple features from the conditioning input and accumulate errors that degrade counting accuracy. Experiments on RGBT-CC and DroneRGBT datasets show our method achieves competitive performance against state-of-the-art RGB-T fusion methods, while requiring only thermal input during inference, eliminating the need for continuous RGB capture that constitutes the primary privacy concern in real-world surveillance deployment. The code will be made publicly available.

Visible-thermal (RGB-T) object detection is a crucial technology for applications such as autonomous driving, where multimodal fusion enhances performance in challenging conditions like low light. However, the security of RGB-T detectors, particularly in the physical world, has been largely overlooked. This paper proposes a novel approach to RGB-T physical attacks using adversarial clothing with a non-overlapping RGB-T pattern (NORP). To simulate full-view (0$^{\circ}$--360$^{\circ}$) RGB-T attacks, we construct 3D RGB-T models for human and adversarial clothing. NORP is a new adversarial pattern design using distinct visible and thermal materials without overlap, avoiding the light reduction in overlapping RGB-T patterns (ORP). To optimize the NORP on adversarial clothing, we propose a spatial discrete-continuous optimization (SDCO) method. We systematically evaluated our method on RGB-T detectors with different fusion architectures, demonstrating high attack success rates both in the digital and physical worlds. Additionally, we introduce a fusion-stage ensemble method that enhances the transferability of adversarial attacks across unseen RGB-T detectors with different fusion architectures.

Event cameras provide several unique advantages over standard frame-based sensors, including high temporal resolution, low latency, and robustness to extreme lighting. However, existing learning-based approaches for event processing are typically confined to narrow, task-specific silos and lack the ability to generalize across modalities. We address this gap with REALM, a cross-modal framework that learns an RGB- and Event-Aligned Latent Manifold by projecting event representations into the pretrained latent space of RGB foundation models. Instead of task-specific training, we leverage low-rank adaptation (LoRA) to bridge the modality gap, effectively unlocking the geometric and semantic priors of frozen RGB backbones for asynchronous event streams. We demonstrate that REALM effectively maps events into the ViT-based foundation latent space. Our method performs downstream tasks, such as depth estimation and semantic segmentation, by simply transferring linear heads trained on the RGB teacher. Most significantly, REALM enables the direct, zero-shot application of complex, frozen image-trained decoders, such as MASt3R, to raw event data. We demonstrate state-of-the-art performance in wide-baseline feature matching, significantly outperforming specialized architectures. Code and models are available at https://papers.starslab.ca/realm/.

RGB-Thermal (T) crowd counting aims to integrate visible-spectrum and thermal infrared information to improve the robustness of crowd density estimation in complex scenes. Although existing studies generally improve counting accuracy through cross-modal feature fusion, most current methods rely on implicit cross-modal fusion strategies and lack explicit modeling of local spatial discrepancies as well as fine-grained characterization of modality reliability at the positional level, thereby limiting the accuracy and interpretability of the fusion process. To address these issues, this paper proposes a two-stage fusion framework, RACANet, a Reliability-Aware Crowd Anchor Network for RGB-T crowd counting. First, we introduce a lightweight cross-modal alignment pretraining stage, which explicitly learns cross-modal semantic correspondences through crowd-prior supervision and local bidirectional soft matching. Then, based on the priors learned during pretraining, a Local Anchor Fusion Module (LAFM) is introduced in the formal training stage. This module generates local semantic anchors by aggregating features from highly reliable regions and further enables adaptive pixel-level feature redistribution with a local attention mechanism. In addition, we propose a discrepancy-aware consistency constraint to dynamically coordinate the reliability of regions where modal representations are consistent. Experiments conducted on two widely used benchmark datasets, RGBT-CC and Drone-RGBT, demonstrate that RACANet outperforms existing methods. The anonymous code is available at https://anonymous.4open.science/r/RACANet-9985.

Existing single-modal RGB trackers often face performance bottlenecks in complex dynamic scenes, while the introduction of event sensors offers new potential for enhancing tracking capabilities. However, most current RGB-event fusion methods, primarily designed in the spatial domain using convolutional, Transformer, or Mamba architectures, fail to fully exploit the unique temporal response and high-frequency characteristics of event data. To address this, we1 propose FreqTrack, a frequency-aware RGBE tracking framework that establishes complementary inter-modal correlations through frequency-domain transformations for more robust feature fusion. We design a Spectral Enhancement Transformer (SET) layer that incorporates multi-head dynamic Fourier filtering to adaptively enhance and select frequency-domain features. Additionally, we develop a Wavelet Edge Refinement (WER) module, which leverages learnable wavelet transforms to explicitly extract multi-scale edge structures from event data, effectively improving modeling capability in high-speed and low-light scenarios. Extensive experiments on the COESOT and FE108 datasets demonstrate that FreqTrack achieves highly competitive performance, particularly attaining leading precision of 76.6% on the COESOT benchmark, validating the effectiveness of frequency-domain modeling for RGBE tracking.

Semantic segmentation for uncrewed aerial vehicles (UAVs) is fundamental for aerial scene understanding, yet existing RGB and RGB-T datasets remain limited in scale, diversity, and annotation efficiency due to the high cost of manual labeling and the difficulties of accurate RGB-T alignment on off-the-shelf UAVs. To address these challenges, we propose a scalable geometry-driven 2D-3D-2D paradigm that leverages multi-view redundancy in high-overlap aerial imagery to automatically propagate labels from a small subset of manually annotated RGB images to both RGB and thermal modalities within a unified framework. By lifting less than 3% of RGB images into a semantic 3D point cloud and rendering it into all views, our approach enables dense pseudo ground-truth generation across large image collections, automatically producing 97% of RGB labels and 100% of thermal labels while achieving 91% and 88% annotation accuracy without any 2D manual refinement. We further extend this 2D-3D-2D paradigm to cross-modal image registration, using 3D geometry as an intermediate alignment space to obtain fully automatic, strong pixel-level RGB-T alignment with 87% registration accuracy and no hardware-level synchronization. Applying our framework to existing geo-referenced aerial imagery, we construct SegFly, a large-scale benchmark with over 20,000 high-resolution RGB images and more than 15,000 geometrically aligned RGB-T pairs spanning diverse urban, industrial, and rural environments across multiple altitudes and seasons. On SegFly, we establish the Firefly baseline for RGB and thermal semantic segmentation and show that both conventional architectures and vision foundation models benefit substantially from SegFly supervision, highlighting the potential of geometry-driven 2D-3D-2D pipelines for scalable multi-modal aerial scene understanding. Data and Code available at https://github.com/markus-42/SegFly.

Visual grounding (VG) localizes target objects in an image from natural-language expressions. In real-world perception, RGB cues often degrade under low illumination and adverse weather, making visual grounding substantially more challenging. However, existing VG benchmarks are largely RGB-only and provide limited, structured coverage of such conditions, hindering systematic robustness evaluation and cross-spectral comparison. We present RGBT-GroundBench, the first large-scale benchmark for RGB-Thermal (TIR) visual grounding in complex environments. It contains over 40K images (21,535 RGB-TIR pairs) and 38,760 object instances with referring expressions, bounding boxes, and fine-grained annotations at three levels: scene types, environmental conditions (illumination and weather), and object properties (size and occlusion). As a benchmark suite, RGBT-GroundBench provides not only curated RGB-TIR grounding annotations but also a unified evaluation protocol supporting RGB-only, TIR-only, and RGB+TIR inputs. Under this protocol, we benchmark 11 representative VG models across diverse scenes and environmental conditions. Our results show that grounding accuracy is strongly correlated with scene complexity, LoRA-based models are more robust in complex scenes, and low-illumination conditions cause significant performance degradation that has been rarely explored. Guided by these observations, we introduce RGBT-VGNet, a simple and reproducible reference baseline under the unified protocol, featuring Asymmetric Modality Adaptation, Language-Aware Visual Synergy, and Tri-Prior Fusion for reliability-aware RGB-TIR integration. Resources, annotations, code, checkpoints, and evaluation scripts have been publicly released.

Achieving precise positioning of the mobile manipulator's base is essential for successful manipulation actions that follow. Most of the RGB-based navigation systems only guarantee coarse, meter-level accuracy, making them less suitable for the precise positioning phase of mobile manipulation. This gap prevents manipulation policies from operating within the distribution of their training demonstrations, resulting in frequent execution failures. We address this gap by introducing an object-centric imitation learning framework for last-meter navigation, enabling a quadruped mobile manipulator robot to achieve manipulation-ready positioning using only RGB observations from its onboard cameras. Our method conditions the navigation policy on three inputs: goal images, multi-view RGB observations from the onboard cameras, and a text prompt specifying the target object. A language-driven segmentation module and a spatial score-matrix decoder then supply explicit object grounding and relative pose reasoning. Using real-world data from a single object instance within a category, the system generalizes to unseen object instances across diverse environments with challenging lighting and background conditions. To comprehensively evaluate this, we introduce two metrics: an edge-alignment metric, which uses ground truth orientation, and an object-alignment metric, which evaluates how well the robot visually faces the target. Under these metrics, our policy achieves 74.58% success in edge-alignment and 89.42% success in object-alignment when positioning relative to unseen target objects. These results show that precise last-meter navigation can be achieved at a category-level without depth, LiDAR, or map priors, enabling a scalable pathway toward unified mobile manipulation. Project page: https://rpm-lab-umn.github.io/category-level-last-meter-nav/

The recent Segment Anything Model (SAM) demonstrates strong instance segmentation performance across various downstream tasks. However, SAM is trained solely on RGB data, limiting its direct applicability to RGB-thermal (RGB-T) semantic segmentation. Given that RGB-T provides a robust solution for scene understanding in adverse weather and lighting conditions, such as low light and overexposure, we propose a novel framework, SARTM, which customizes the powerful SAM for RGB-T semantic segmentation. Our key idea is to unleash the potential of SAM while introduce semantic understanding modules for RGB-T data pairs. Specifically, our framework first involves fine-tuning the original SAM by adding extra LoRA layers, aiming at preserving SAM's strong generalization and segmentation capabilities for downstream tasks. Secondly, we introduce language information as guidance for training our SARTM. To address cross-modal inconsistencies, we introduce a Cross-Modal Knowledge Distillation(CMKD) module that effectively achieves modality adaptation while maintaining its generalization capabilities. This semantic module enables the minimization of modality gaps and alleviates semantic ambiguity, facilitating the combination of any modality under any visual conditions. Furthermore, we enhance the segmentation performance by adjusting the segmentation head of SAM and incorporating an auxiliary semantic segmentation head, which integrates multi-scale features for effective fusion. Extensive experiments are conducted across three multi-modal RGBT semantic segmentation benchmarks: MFNET, PST900, and FMB. Both quantitative and qualitative results consistently demonstrate that the proposed SARTM significantly outperforms state-of-the-art approaches across a variety of conditions. Code and pre-trained weights can be found at https://github.com/wahaha-debug/SARTM.