Robotics Simulation

We introduce GE-Sim 2.0 (Genie Envisioner World Simulator 2.0), a closed-loop video world simulator for robotic manipulation. Building on the action-conditioned video generation framework of Genie Envisioner, GE-Sim 2.0 is re-trained on thousands of hours of real-world robot data spanning teleoperation, contact-rich interaction, and on-robot policy deployment, substantially improving action-following fidelity and trajectory coverage. On top of this foundation, three new modules close the loop from video simulation to policy learning: a state expert that decodes proprioceptive state from video latents to support next-chunk prediction by downstream VLA policies; a world judge that scores generated rollouts against task instructions, yielding machine-verifiable success signals and rewards in place of manual inspection; and an acceleration framework that delivers a 25-frame rollout in 2.3 seconds on a single H100, with up to 4* frame skipping at inference for long-horizon evaluation. GE-Sim 2.0 tops the public WorldArena leaderboard at only 2B parameters, outperforming both dedicated robotic world models and closed-source general video generators, and policies trained against its rollouts and rewards translate into measurable real-world gains, establishing GE-Sim 2.0 as a practical platform for scalable evaluation and closed-loop learning of manipulation policies.

Semantic mapping methods are increasingly used as intermediate scene representations for downstream robotic reasoning and manipulation, yet their evaluation is still largely tied to fixed benchmark datasets with limited coverage of manipulation-relevant corner cases. In this work, we extend OSMa-Bench toward controllable benchmarking with prompt-generated synthetic indoor scenes. Our pipeline automatically generates scene descriptions, synthesizes corresponding environments with SceneSmith, and adapts the resulting assets into an OSMa-Bench-compatible simulation format. This adaptation requires a nontrivial intermediate layer, including semantic normalization, material and texture repair, shader fallback policies, floor handling, navigation setup, and controlled lighting configuration. A key advantage of the proposed setup is that the original scene-generation prompt is known in advance and can therefore serve as an auxiliary semantic specification of the intended scene. We use this property to extend the VQA component of OSMa-Bench with a prompt-grounded question category. The resulting framework supports targeted stress-testing of semantic scene representations under conditions such as clutter, small objects, partial occlusions, and lighting variation, and makes benchmarking more extensible and better aligned with downstream manipulation requirements. Our code is available at https://github.com/be2rlab/OSMa-Bench-v2.

Limbless terrestrial animals exhibit exceptional locomotor versatility and control, currently unmatched by engineered counterparts. Here, we introduce a computational framework that enables soft synthetic snakes to navigate unstructured, heterogeneous 3D terrains. Our approach is grounded in bio-inspired actuation and sensing models that reduce the control complexity inherent to high-degree-of-freedom, continuum bodies. These models are integrated into a reinforcement learning architecture to derive environment-traversing policies. Training first occurs in simplified, homogeneous terrains to learn locomotion primitives. These are then composed into adaptive strategies for complex landscapes. We demonstrate robustness by deploying a snake in high-fidelity 3D environments reconstructed from real-world imaging, achieving reliable navigation. Overall, this work provides a physically-realistic simulation platform and practical insights for the control of continuum systems in natural terrains.

We present MuJoCoUni, a downstream MuJoCo distribution for online robot learning and batched physics evaluation. Alongside the open-loop batched trajectory generation already provided by upstream mujoco.rollout, MuJoCoUni supplies runtime primitives for stateful environment execution. The target workloads need high-throughput parallel execution while retaining upstream CPU MuJoCo semantics for models, sensors, contact, and constraints. Its core object, BatchEnvPool, is a C++/pybind11 executor that owns per-environment mjModel copies, per-thread mjData workers, and an internal thread pool. It provides final-state-only short stepping, sparse reset, reset-lifecycle domain randomization, batched sensor forward evaluation without advancing dynamics, and batched Jacobian and height-field queries. The implementation is confined to the Python binding layer; MuJoCo's solver, contact model, integrator, and core source tree retain upstream semantics. This report describes the BatchEnvPool API, implementation boundary, relationship to rollout, and the validation and benchmark scripts shipped with the open-source mujoco-uni package, which is installed with \texttt{pip install mujoco-uni}.

Recent progress of video diffusion models have enabled extensive simulation of the physical world. While simulation with hand object interaction has been less explored. We propose DexSIM, a dexterous simulation framework for simulating dexterous manipulation in real-time. While previous works utilizing video diffusion and 3D reconstruction focus on navigation, dexterous manipulation has been limited while it has extensive applications for creating interactive experiences with the simulated world and for generating synthetic data for robotics. Existing methods lack real-time interactivity and long-term spatial consistency and memory. We propose a 2-stage training framework for DexSIM. First we train a bi-directional video diffusion model by jointly embedding the hand action trajectory and video in a unified feature space. We utilize gaussian heatmap hand encoding for more accurate hand representation. Then we conduct a roll-out based autoregressive training with updated spatial cache as attention sink for spatial memory, which improves long-term consistency and 3D aware dexterous manipulation simulation. DexSIM outperforms the baseline on pixel and semantic similarity, motion fidelity, and hand projection accuracy. It also allows new applications such as hand motion transfer and runs at 15.24 FPS real-time interactivity.

We present IsaacIPC, a robotic simulation framework that couples GPU accelerated incremental potential contact (IPC) with IsaacSim/Lab. IsaacIPC maps simulated deformation between simulation and visual meshes, enabling real-time realistic rendering with applications to data collection and policy evaluation. For tactile sensing, we introduce the geometric mortar contact potential (GMCP), which defines a barrier potential over contact samples on tactile surfaces to better resolve contact-pressure distributions. We evaluate GMCP on contact benchmarks and demonstrate IsaacIPC on rigid-deformable robotic simulations including a quadruped robot, a dexterous hand, and a universal manipulation interface (UMI) gripper.

Agricultural UAV research requires simulators that integrate realistic 3D scenes, high-fidelity vehicle dynamics, and robotics middleware, while remaining practical to deploy across heterogeneous development machines. We present Droneulator, a portable UAV simulator architecture that combines RotorPy for multirotor dynamics with Godot 4 for rendering and sensor generation. Droneulator exposes both PX4-based control and a lightweight WebSocket command path, and publishes synchronised visual and state streams through a Zenoh-based ROS2-compatible pipeline. This integration enables a single stack to support inspection-oriented data capture, ROS2/PX4 local planning, and reinforcement learning experiments without modifying the simulator infrastructure. We present quantified validation of the current system across three agricultural UAV workflows: tree-scale image collection for 3D reconstruction with COLMAP, local planning around canopy obstacles using EGO-Planner, and closed-loop reinforcement learning through a custom Gymnasium environment. In the reported setup, the results show that the simulator can sustain low-latency sensing, support reconstruction-oriented data collection under varying capture density, execute collision-free local planning around canopy obstacles, and support stable depth-sensing-based policy training for obstacle-aware navigation. Together, these results show the potential of Droneulator for agricultural UAV inspection, planning, and learning within one deployable stack.

This article presents a novel SOFA based finite element method for the soft body modeling and the corresponding dynamic simulation and control of a pneumatic morphing soft quadrotor. The proposed modeling preserves the physical interpretability and control structure of traditional quadrotor dynamics, while capturing the complex, time-varying behavior of pneumatically actuated soft arms. In SOFA, the soft pneumatically actuated arms are discretized as a tetrahedral mesh following an elastic material law that produces internal forces adequate to the real dynamic behavior of the body. Pneumatic actuation governed by both periodic and error-based control signals is applied within the internal cavities to analyze the morphing capability. Finally, a proportional-integral controller is proposed to study the controlled dynamic behavior and morphing capabilities of the pneumatic arm, wherein the pneumatic actuation to the soft arm is controlled to achieve the desired target position. The simulation results show the effectiveness of the proposed novel modeling framework and the related controller design.

Subterranean (SubT) environments have been a frontier for autonomous robotics, driven by the push for automation of mining operations and the interest in planetary exploration (Martian Lava Tubes). Due to the challenges involved in accessing real SubT environments, rigorous hardening of autonomy stacks in realistic simulation environments is critical. This article fills a well-known gap, which relates to the unavailability of a large-scale simulation-based benchmarking infrastructure for rigorous statistical evaluation of robotic autonomy, due to which it is common for SubT research articles to present validation results in a few environments at best. This article presents SubTGraph, a novel framework for rapid synthesis of multi-level SubT environments with high variability, incorporating user specifications related to topology, dimensionality, textures, etc., to generate distinct environments such as operational mines, natural caves and lava tubes. SubTGraph builds a cost matrix from user-specified structural constraints to guide the classical Dijkstra algorithm to procedurally generate SubT worlds utilizing topometric tiles from the DARPA World Generator. Three robotics case-studies are investigated to demonstrate the utility of SubTGraph for rigorous validation of different layers in the robotic autonomy stack. Structural semantic segmentation is validated against topometric ground truths, multi-agent path planning is widely tested for identification of patterns and trends in the algorithm behavior and LIO SLAM is stress-tested in challenging subterranean sections to identify failure cases. The SubTGraph world creation codebase is open-sourced (https://github.com/LTU-RAI/SubTGraph.git) along with a database consisting of 150 highly variable underground worlds.

Collective behavior models, such as aggregation and flocking, usually assume self-propelled robots that can directly execute their desired speed and direction of motion without fundamental constraints. However, autonomous sailing robots violate this assumption. Their motion is shaped by wind-dependent propulsion, restricted headings, and spatially varying wind conditions. In particular, maneuverability is coupled to wind speed: in weak wind, sailboats may turn only slowly or not at all, whereas stronger wind enables faster turns. This introduces transient heterogeneity in speed and maneuverability across the flock. We focus on this fast-slow coordination problem in sailing robot flocks. To study this problem, we introduce SailSwarmSwIM, a reduced-order simulator for autonomous sailing robot swarms that captures wind-dependent speed and maneuverability, no-go zones, tacking behavior, and steady or gusty wind fields. To design our novel flocking technique, we start from the Couzin model and introduce a speed-weighted social interaction rule that accounts for each robot's transient motion constraints. A key result is that increasing the social influence of slower robots improves polarization and reduces close encounters. This effect arises from a balance between attraction to fast neighbors, which helps maintain movement, and cohesion around slow neighbors, which prevents the flock from fragmenting. Together, our simulator, SailSwarmSwIM, and the speed-weighted interaction rule provide a modeling framework for studying adaptive collective behavior in robotic fleets whose motion capabilities are continuously shaped by wind.

Reinforcement learning for legged locomotion has matured into a stack of multi-component reward functions and physics-engine benchmarks whose morphologies are uniformly derived from real commercial hardware. Game NPCs, however, are bound by stylistic constraints absent from sim-to-real robotics and routinely take the form of creatures with no real-robot counterpart. We introduce ARC-RL, a suite of four MuJoCo continuous-control environments featuring robotic morphologies inspired by the bestiary of ARC Raiders: the 18-DoF tall hexapod Queen, the 12-DoF armoured hexapod Bastion, the 18-DoF compact hexapod Tick, and the 12-DoF quadruped Leaper. All four robots share a unified observation template, action convention, simulation cadence, and a single closed-form multi-component reward function whose only per-morphology variation lives in a small set of weights and parameters. The reward fuses a velocity-tracking tent, a healthy survive bonus, a phase-locked gait-compliance bonus/cost pair, action regularisers, three safety penalties, and a posture anchor; no motion-capture data enters the reward at any point. We additionally provide hand-crafted Central Pattern Generator demonstrators per morphology, which serve both as fixed expert references and as sources of prior data for offline-to-online training. On this playground, we conduct a controlled empirical study comparing standard online algorithms (SAC, SPEQ, SOPE-EO) and methods augmented with prior data (SACfD, SPEQ-O2O, SOPE), and characterise how each paradigm copes with the playground's morphological diversity and animation-style stylistic constraints. Source code is available at https://github.com/CarloRomeo427/ARC_RL.git.

Simulation is a central tool for scalable robot learning, but its effectiveness depends on the quality of object assets. While modern 3D datasets provide rich geometric and kinematic representations, they typically lack the physical properties required for stable and realistic interaction, requiring significant manual effort to construct simulation-ready articulated objects. In this thesis, we introduce interaction-readiness, which characterizes whether an object can be reliably simulated under manipulation. We propose a quantitative evaluation framework that decomposes interaction-readiness into measurable components, enabling systematic analysis of object quality and revealing failure modes not captured by conventional evaluation. We further present a multi-modal, simulator-in-the-loop approach for generating interaction-ready articulated objects from incomplete 3D assets. The method integrates geometric, visual, and semantic information to infer physical properties and refines them through iterative simulator feedback to improve physical consistency. Experiments across diverse articulated objects and manipulation tasks show that object quality directly impacts simulation stability, interaction behavior, and policy performance. Objects refined by our method exhibit more stable and realistic dynamics, enabling more reliable downstream learning and evaluation. Overall, this thesis demonstrates the importance of physical realism for articulated objects in simulation and introduces a practical multi-modal refinement approach, guided by simulator feedback, for constructing such objects at scale.

Generating simulation-ready tabletop scenes from task instructions is an intriguing and promising research direction in the field of Embodied AI. However, existing task-to-scene generation methods rely exclusively on large language models (LLMs) to predict scene layouts, inevitably yielding object collisions or floating due to LLMs' inherent limitations in 3D spatial reasoning. In this paper, we present STABLE, a semantics-physics dual-system tailored for simulation-ready tabletop scene generation. STABLE consists of two complementary modules: (i) a Semantic Reasoner, a fine-tuned LLM trained on a structured tabletop scene dataset to generate coarse layouts from input task instructions, and (ii) a Physics Corrector, a physics-aware flow-based denoising model that outputs pose updates to refine layouts, which ensures the physical plausibility of scenes while preserves semantic alignment with task instructions. STABLE adopts a progressive generation paradigm: by alternating between the Semantic Reasoner and Physics Corrector, it incrementally expands the scene from task-critical objects to background objects. Experiments demonstrate that STABLE successfully generates simulation-ready tabletop scenes that strictly conform to task instructions and significantly enhances the physical validity of scenes over prior art.

In robot-assisted minimally invasive surgery, high-fidelity dynamic endoscopic scene reconstruction and simulation are crucial to enhancing downstream tasks and advancing surgical outcomes. However, existing methods primarily focus on visual reconstruction, lacking physics-based descriptions of the scene required for realistic simulation. We propose a unified framework that achieves physics-aware reconstruction and physical simulation of endoscopic scenes through Multi-modal Large Language Models (MLLMs)-guided Gaussian Splatting. Our approach utilizes 4D Gaussian Splatting (4DGS) integrated with pre-trained segmentation and depth estimation to represent deformable tissues and tools. To achieve automatic inference of physical properties, we introduce an object-wise material field that initializes material parameters via MLLM and refines them through a differentiable Material Point Method (MPM) under joint supervision from rendered images and optical flow. Validated on both open-source and in-house datasets, our framework achieves superior simulation fidelity and physical accuracy compared to state-of-the-art methods, underscoring its potential to advance robot-assisted surgical applications.

Athletic performance represents the pinnacle of human motor intelligence, demanding rapid choices, precise control, agility, and coordinated physical execution. Replicating this seamless combination of capabilities remains elusive in current artificial intelligence and robotic systems. Concurrently, understanding the biological mastery of these movements is hindered because complex muscle coordination is rarely measured in vivo due to the limitations of physical equipment. To bridge this fundamental gap in understanding, MyoChallenge at NeurIPS 2025 established a pioneering benchmark for motor control intelligence in sports, leveraging high-fidelity musculoskeletal models within physics simulation combined with machine learning-driven algorithms. The competition introduces two distinct tracks emphasizing either upper or lower limbs control: a table tennis rally task utilizing a biomechanic upper limb composed of an arm with a hand and a trunk; and a soccer penalty kick using a biomechanic model of legs and a trunk. Marking the fourth iteration of the MyoChallenge series, this event attracted almost 70 teams and over 560 submissions globally, uniting a diverse community ranging from physicians and neuroscientists to machine learning experts. The competition facilitated the development of several state-of-the-art control algorithms for a musculoskeletal system capable of sports agility, leveraging techniques such as physics-based motion planners, on-policy behaviour cloning, hierarchical planning, and muscle synergies. By integrating standardized tasks and physiologically realistic models into the open-source framework of MyoSuite, MyoChallenge'25 serves as a reproducible and reusable testbed to accelerate interdisciplinary research across machine learning, biomechanics, sports science, and neuroscience. Project page: https://www.myosuite.org//myochallenge/myochallenge-2025.

This paper presents a prototyping framework for distributed control of multi-robot systems, aimed at bridging theory and practical testing of distributed optimization algorithms. Using the Single Program, Multiple Data (SPMD) paradigm, the framework emulates distributed control on a single computer, with each core running the same algorithm using local states and neighbour-to-neighbour communication. We demonstrate the framework on a four-quadrotor position-swapping task using a non-cooperative game-theoretic distributed algorithm. Computational time and trajectory data are compared across the supported dynamics levels: a point-mass model, a high-fidelity quadrotor model, and an experimental hardware testbed using Crazyflie quadcopters. The results show that the framework provides a low-cost and accessible approach for validating distributed algorithms.

High-fidelity physics simulation is essential for closing the sim-to-real gap in robotics and complex mechanical systems. However, the computational overhead of high-fidelity engines often limits their use in data-intensive tasks like Reinforcement Learning (RL) and global optimization. We introduce Chrono-Gymnasium, a distributed computing framework that scales the high-fidelity multi-body dynamics of Project Chrono across large-scale computing clusters. Built upon the Ray framework, Chrono-Gymnasium provides a standardized Gymnasium interface, enabling seamless integration with modern machine learning libraries while providing built-in synchronization and messaging primitives for distributed execution. We demonstrate the framework's capabilities through two distinct case studies: (1) the training of an RL agent for autonomous robotic navigation in complex terrains, and (2) the Bayesian Optimization of a planetary lander's design parameters to ensure landing stability. Our results show that Chrono-Gymnasium reduces wall-clock time for high-fidelity simulations without sacrificing physical accuracy, offering a scalable path for the design and control of complex robotic systems.

Generating robot simulation environments remains a major bottleneck in simulation-based robot learning. Constructing a training-ready MuJoCo scene typically requires expertise in 3D asset modeling, MJCF specification, spatial layout, collision avoidance, and robot-model integration. We present SR-Platform, a production-deployed agentic system that converts free-form natural language descriptions into executable, physically valid MuJoCo environments. SR-Platform decomposes scene synthesis into four stages: an LLM-based orchestrator that converts user intent into a structured scene plan; an asset forge that retrieves cached assets or generates new 3D geometry through LLM-to-CadQuery synthesis; a layout architect that assigns object poses and verifies industrial constraints; and a bridge layer that assembles the final MJCF scene and merges the selected robot model. The system is deployed as a nine-service Docker stack with WebSocket progress streaming, MinIO-backed mesh storage, Qdrant-based semantic asset retrieval, Redis job state, and InfluxDB telemetry. Using 30 days of production telemetry covering 611 successful LLM calls, SR-Platform generates five-object scenes with a median end-to-end latency of approximately 50 s, while cache-accelerated scenes complete in approximately 30-40 s. The asset forge shows an 11.3% first-attempt retry rate with automatic recovery, and cached asset retrieval removes per-object LLM calls for previously generated object types. These results show that agentic scene synthesis can reduce the manual effort required to create diverse robot training environments, enabling users to produce executable MuJoCo scenes from plain English prompts in under one minute.

Differentiable simulation of soft bodies is a foundation for system identification, trajectory optimization, and Real2Sim transfer. Yet, existing methods such as the differentiable Projective Dynamics (DiffPD) struggle when faced with heterogeneous materials with extreme stiffness contrasts, hyperelasticity under large deformations, and contact-rich interactions, which are common scenarios in the real world. We present DiffPhD, a unified GPU-accelerated differentiable Projective Dynamics framework for heterogeneous materials that tackles these intertwined challenges simultaneously. Our key insight is a careful integration of: (i) stiffness-aware projective weights to embed heterogeneity into the global system; (ii) trust-region eigenvalue filtering lifted to the backward pass for stable hyperelastic gradients and a type-II Anderson Acceleration scheme with dual-gate convergence to stabilize forward iteration under large stiffness contrasts; and (iii) a unified GPU pipeline that reuses a single sparse factor across forward, backward, and contact computations, with stiffness-amplified Rayleigh damping folded into the same factor for heterogeneity-aware dissipation at zero recurring cost. DiffPhD achieves strict gradient accuracy while delivering up to an order-of-magnitude speedup over prior differentiable solvers on heterogeneous, hyperelastic, contact-rich benchmarks. Crucially, this speedup does not come at the cost of stability: DiffPhD remains convergent on stiffness contrasts up to 100x where prior PD solvers degrade. This unlocks end-to-end gradient-based optimization on regimes previously bottlenecked by either solver fragility or per-iteration cost -- shell--joint composite creatures, soft characters wielding stiff weapons, and soft-gripper robotic manipulation -- all handled within a single forward--backward pass.

World models have emerged as a powerful paradigm for building interactive simulation environments, with recent video-based approaches demonstrating impressive progress in generating visually plausible dynamics. However, because these models typically infer dynamics from video and represent them in latent states, they do not explicitly enforce physical constraints. As a result, the generated video rollouts are not physically plausible, exhibiting unstable contacts, distorted shapes, or inconsistent motion. In this paper, we present an agentic framework constructing physics-based world models through executable simulation code. The framework coordinates planning, code generation, visual review, and physics analysis agents. The planning agent converts the natural language prompt into a structured scene plan, the code agent implements it as executable simulation code, and the visual review agent provide visual feedback while the physics analysis agent checks physical consistency. The code is iteratively revised based on the feedback until the simulation matches the prompt reqirements and physical constraints. Experimental results show that our framework outperforms advanced video-based models in physical accuracy, instruction fidelity and visual quality, which could be applied to various scenarios including driving simulation and embodied robot tasks.

We present OrbiSim, a novel robotic simulation paradigm that redefines world models as a fully differentiable physics engine for embodied intelligence. Unlike prior world models that focus on unconstrained imagination in latent or visual domains, OrbiSim establishes a unified, physically-grounded pathway that bridges structured scene assets, neural dynamics, and downstream reinforcement learning. By enabling end-to-end differentiability throughout the entire simulation loop -- spanning from explicit state transitions to visual observation generation -- OrbiSim supports tasks traditionally intractable for classical simulators, such as differentiable contact modeling, gradient-based policy optimization under sparse rewards, and intuitive physical inference. Empirical results demonstrate that OrbiSim significantly outperforms state-of-the-art world models in both predictive fidelity and control performance. Furthermore, its consistent responsiveness to asset configurations and physical parameters suggests its potential as a differentiable tool for enhancing robot simulation and policy training.

Vision-Language Models (VLMs) have demonstrated exceptional general reasoning capabilities. However, their performance in embodied navigation remains hindered by a scarcity of aligned open-world vision and robot control data. Despite simulators providing a cost-effective alternative for data collection, the inherent reliance on photorealistic simulations often limits the transferability of learned policies. To this end, we propose \textit{\textbf{S}andbox-\textbf{A}bstracted \textbf{G}rounded \textbf{E}xperience} (\textbf{\textit{SAGE}}), a framework that enables agents to learn within a physics-grounded semantic abstraction rather than a photorealistic simulation, mimicking the human capacity for mental simulation where plans are rehearsed in simplified physics abstractions before execution. \textit{SAGE} system operates via three synergistic phases: (1) \textit{Genesis}: constructing diverse, physics-constrained semantic environments to bootstrap experience; (2) \textit{Evolution}: distilling experiences through Reinforcement Learning (RL), utilizing a novel asymmetric adaptive clipping mechanism to stabilize updates; (3) \textit{Navigation}: bridging the abstract policy to open-world control. We demonstrate that \textit{SAGE} significantly improves planner-assisted embodied navigation, achieving a 53.21% LLM-Match Success Rate on A-EQA (+9.7% over baseline), while showing encouraging transfer to physical indoor robot deployment.

Articulated objects used in simulation and embodied AI are typically specified by geometry and kinematic structure, but lack the fine-grained dynamical effects that govern realistic mechanical behavior, such as frictional holding, detents, soft closing, and snap latching. Existing approaches either ignore the detailed structure of dynamics entirely, or use simple models with limited expressiveness. We introduce JODA, a framework for generating joint-level dynamics as a structured three-channel field over the joint degree of freedom, capturing conservative forces, dry friction, and damping. Instantiated using shape-constrained piecewise cubic interpolation (PCHIP), this formulation defines a compact and expressive function space that is both interpretable and compatible with differentiable simulation. Building on this representation, we develop methods for inferring and refining joint dynamics from multimodal inputs. Given visual observations and joint context, a vision-language model proposes structured dynamical primitives, which are composed into a unified dynamics field. The resulting representation supports both direct manipulation and gradient-based refinement. We demonstrate that JODA enables plausible and controllable modeling of diverse joint behaviors, providing a unified interface for inference, editing, and optimization. Code and example assets with their generated profiles will be released upon publication.

LLM/VLM-based digital agents have advanced rapidly thanks to scalable sandboxes for coding, web navigation, and computer use, which provide rich interactive training grounds. In contrast, embodied agents still lack abundant, diverse, and automatically generated 3D environments for interactive learning. Existing embodied simulators rely on manually crafted scenes or procedural templates, while recent LLM-based 3D generation systems mainly produce static scenes rather than deployable environments with verifiable tasks and standard learning interfaces. We introduce SimWorld Studio, an open-source platform built on Unreal Engine 5 for generating evolving embodied learning environments. At its core is SimCoder, a tool/skill-augmented coding agent that writes and executes engine-level code to construct physically grounded 3D worlds from language/image instructions. SimCoder self-evolves by using verifier feedback (e.g., compilation errors, physics checks, VLM critiques) to revise environments and autonomously add reusable tools and skills to its library. Generated worlds are exported as Gym-style environments for embodied agent learning. SimWorld Studio further enables co-evolution between environment generation and embodied learning: agent performance feedback guides SimCoder to generate adaptive curricula near the learner's capability frontier, so that environments become increasingly challenging as the embodied agent improves. Three case studies on embodied navigation show that self-evolution improves generation reliability, generated environments substantially improve embodied agent performance that generalizes to unseen benchmarks, and co-evolution yields an 18-point success-rate gain over fixed-environment learning and a 40-point gain over an untrained agent.

This paper introduces a low-cost experimental mockup to simulate the laser cutting process of containers in nuclear decommissioning. It is composed of a three-axis table supporting a cuboid container with ultraviolet-sensitive faces, a six-degree-of-freedom serial manipulator holding an ultraviolet torch that simulates the laser, and a visual system based on cameras and fiducial markers. The system employs a constrained task-space adaptive motion controller that compensates for inaccurate parameters and eliminates the need to calibrate the system. Furthermore, as the motion controller explicitly accounts for geometric constraints, the robot reactively avoids collisions with obstacles while handling the ultraviolet torch. To improve the tracking of the laser-cutting path, we control the ultraviolet beam, which requires only four degrees of freedom, instead of the full end-effector pose. Experiments show that, despite an initially uncalibrated system, the overall system is capable of tracking different trajectories with an overall mean accuracy of 3.9 (sd 2.5) mm when the end-effector pose is controlled and 2.4 (sd 1.3) mm when the ultraviolet beam is controlled.

Physics-based digital twins aim to predict the dynamics of real-world objects under interaction, enabling real-to-sim-to-real applications in robotics. Current approaches reconstruct such twins as explicit physical models (such as spring-mass systems) to predict the dynamics, but the resulting models often inherit the resolution of the visual reconstruction rather than being reduced to the physical complexity required to reproduce task-relevant dynamics. This mismatch introduces redundant topology, making repeated forward-dynamics rollouts unnecessarily expensive. To address this challenge, we present PhySPRING, an fully differentiable GNN-based method to reduce complexity in spring--mass digital twins. PhySPRING jointly learns a hierarchy of coarsened graph topologies and their mechanical parameters from observations. At each reduction level, PhySPRING merges nodes with similar learned dynamic responses to optimize the topology, while maintaining every reduced layer as an explicit spring--mass system. On the PhysTwin benchmark, PhySPRING improves dense reconstruction and prediction accuracy over PhysTwin, while reduced models retain stable physical and visual fidelity with up to a 2.30 times speed-up. We further demonstrate the effectiveness of PhySPRING in a Real2Sim robot policy-evaluation pipeline, where the reduced models are substituted zero-shot into ACT and $π_0$ evaluations, maintaining comparable manipulation success rates across downsampling levels while improving action-sampling effectiveness. Together, PhySPRING enables efficient and structure-preserving spring--mass reduction without sacrificing fidelity or robotic utility.

Reliable simulation evaluation of robot manipulation policies serves as a high-fidelity proxy for real-world performance. Although existing benchmarks cover a wide range of task categories, they lack visual realism, creating a large domain gap between simulation and reality. This undermines the reliability of simulation-based evaluation in predicting real-world performance. To mitigate the sim-to-real visual gap, we conduct a systematic analysis to isolate the effects of lighting and material. Our results show that these factors play a critical role in geometric reasoning and spatial grounding, yet are largely overlooked in existing benchmarks. Motivated by the analysis, we propose VISER, a visually realistic benchmark for evaluating robot manipulation in simulation. VISER features a high-fidelity dataset of over 1,000 3D assets with physically-based rendering (PBR) materials, along with 3D scenes created from these assets through curated layouts or generation. To this end, we propose an automated pipeline leveraging Multi-modal Large Language Models (MLLMs) for material-aware part segmentation and material retrieval, enabling scalable generation of physically plausible assets. Building on the high-fidelity 3D asset dataset, we construct diverse evaluation tasks, such as grasping, placing, and long-horizon tasks, enabling scalable and reproducible assessment of Vision-Language-Action (VLA) models. Our benchmark shows a strong correlation between simulation and real-world performance, achieving an average Pearson correlation coefficient of 0.92 across different policies.

The rapid advancement of Multimodal Large Language Models (MLLMs) has empowered Unmanned Aerial Vehicle (UAV) with exceptional capabilities in spatial reasoning, semantic understanding, and complex decision-making, making them inherently suited for UAV Search and Rescue (SAR). However, existing UAV SAR research is dominated by traditional vision and path-planning methods and lacks a comprehensive and unified benchmark for embodied agents. To bridge this gap, we first propose the novel task of \textbf{Embodied Search and Rescue (ESAR)}, which requires aerial agents to autonomously explore complex environments, identify rescue clues, and reason about victim locations to execute informed decision-making. Additionally, we present \textbf{ESARBench}, the first comprehensive benchmark designed to evaluate MLLM-driven UAV agents in highly realistic SAR scenarios. Leveraging Unreal Engine 5 and AirSim, we construct four high-fidelity, large-scale open environments mapped directly from real-world Geographic Information System (GIS) data to ensure photorealistic landscapes. To rigorously simulate actual rescue operations, our benchmark incorporates dynamic variables including weather conditions, time of day, and stochastic clue placement. Furthermore, we create a dataset of 600 tasks modeled after real-world rescue cases and propose a robust set of evaluation metrics. We evaluate diverse baselines, ranging from traditional heuristics to advanced ground and aerial MLLM-based ObjectNav agents. Experimental results highlight the challenges in ESAR, revealing critical bottlenecks in spatial memory, aerial adaptation, and the trade-off between search efficiency and flight safety. We hope ESARBench serves as a valuable resource to advance research on Embodied Search and Rescue domain. Source code and project page: https://4amgodvzx.github.io/ESAR.github.io.

We present MiniVLA-Nav v1, a simulation dataset for Language-Conditioned Object Approach (LCOA) navigation: given a short natural-language instruction, an NVIDIA Nova Carter differential-drive robot must navigate to the named object and stop within 1 m across four photorealistic Isaac Sim environments (Office, Hospital, Full Warehouse, and Warehouse with Multiple Shelves). Each of the 1,174 episodes pairs an instruction with synchronized 640x640 RGB images, metric depth maps (float32, metres), and instance segmentation masks, together with continuous (v,omega) and 7x7 tokenized expert action labels recorded at 60 Hz from a vision-based proportional controller. Trajectory diversity is ensured through three spawn-distance tiers (near: 1.5-3.5 m, mid: 3.5-7.0 m, far: global curated points; Pearson r=0.94 between spawn distance and trajectory length), 12 object categories, 18 training templates, and 12 paraphrase-OOD templates. Five evaluation splits support in-distribution accuracy, template-paraphrase robustness, and OOD object-category benchmarking. The dataset is publicly available at https://huggingface.co/datasets/alibustami/miniVLA-Nav

We introduce Lucid-XR, a generative data engine for creating diverse and realistic-looking multi-modal data to train real-world robotic systems. At the core of Lucid-XR is vuer, a web-based physics simulation environment that runs directly on the XR headset, enabling internet-scale access to immersive, latency-free virtual interactions without requiring specialized equipment. The complete system integrates on-device physics simulation with human-to-robot pose retargeting. Data collected is further amplified by a physics-guided video generation pipeline steerable via natural language specifications. We demonstrate zero-shot transfer of robot visual policies to unseen, cluttered, and badly lit evaluation environments, after training entirely on Lucid-XR's synthetic data. We include examples across dexterous manipulation tasks that involve soft materials, loosely bound particles, and rigid body contact. Project website: https://lucidxr.github.io