Soft Robotics

Momentum

21 papers in the last four weeks, up 133% on the four weeks before. 0.2% of all new papers.

Jul 13Week of Sep 28

Latest papers 125

May 19, 2026cs.RO

Topology-Optimized Pneumatic Soft Actuator: Design and Experimental Validation

This paper demonstrates the computational design of soft elastomeric pneumatic actuators using nonlinear topology optimization. An existing density- and porohyperelasticity-based topology optimization framework was extended from 2D to 3D and used to generate two manufacturable actuator designs, which were then studied numerically and experimentally. For both designs, the objective was to maximize the bending response for a prescribed actuation pressure under two different allowable strain limits. A key advantage of the employed topology optimization framework is that it can consistently, during the optimization, account for the very large deformations induced upon pressurization. The two optimized 3D designs were fabricated using stereolithography and experimentally tested to validate their performance.
May 19, 2026cs.RO

Terrestrial Soft Mobile Robots: A Review

Soft mobile robots have emerged as a promising area of research with potential applications in various disciplines including but not limited to search-and-rescue, service, surveillance, explorations, and manufacturing. In this article, we provide a comprehensive review of the current state of soft mobile robot research, focusing on wheelless terrestrial locomotive systems. We include past and present developments in locomotion strategies, actuation methods, modeling approaches, and control systems. Further, we identify key research challenges that must be overcome to enable the widespread adoption of soft mobile robots in various applications. Overall, this article provides a valuable resource for researchers and practitioners interested in the field of soft mobile robots and soft robotics.
May 18, 2026cs.RO

Data-Driven Dynamic Modeling of a Tendon-Actuated Continuum Robot

Developing dynamic models for tendon-driven continuum robots is challenging due to their nonlinear, high-dimensional, and friction-dominated dynamics. This paper presents a comparative study of data-driven system identification methods, including N4SID, ARX, and SINDYc, for modeling a tendon-actuated continuum robot with rolling joints developed at CERN. Despite the high number of joints of the robot, experimental analysis reveals that a two-degree-of-freedom dynamic model can accurately capture the system dynamics, owing to strong kinematic dependencies between the joints. The models are validated against experimental data, and used in the design of a model predictive controller, demonstrating their feasibility for real-time control.
May 18, 2026cs.RO

ManiSoft: Towards Vision-Language Manipulation for Soft Continuum Robotics

Most existing vision-language manipulation research targets rigid robotic arms, whose fixed morphology limits adaptability in cluttered or confined spaces. Soft robotic arms offer an appealing alternative due to their deformability, but confront challenges such as unreliable proprioception and distributed low-level actuation. To investigate these challenges, we introduce \ManiSoft, a benchmark for vision-language manipulation with soft arms. ManiSoft features a tailored simulator that couples realistic soft-body dynamics with contact-rich interactions via an elastic force constraint. On this basis, ManiSoft defines four tasks, each highlighting distinct aspects of deformable control, from basic end-effector coordination to obstacle avoidance. To support policy training and evaluation, \ManiSoft{} includes an automated pipeline that generates 6,3006{,}300 diverse scenes and corresponding expert trajectories. To produce high-quality trajectories at scale, we first employ a high-level planner to decompose each task into a sequence of waypoints, followed by a low-level reinforcement learning policy that generates torque commands to track waypoints. Benchmarking three representative policy models shows relatively promising results in clean scenes but substantial performance drop under randomization. Visualization analysis indicates that failures stem primarily from inaccurate visual estimation of proprioceptive state and limited exploitation of deformability for adaptive obstacle avoiding. We anticipate ManiSoft to serve as a valuable testbed, bridging the gap between rigid and soft arms in the context of vision-language manipulation. Out codes and datasets are released at https://buaa-colalab.github.io/ManiSoft.
May 18, 2026cs.RO

Bidirectional Optical sensors for Actuation Tracking (BOAT) in soft lattice systems

The growing adoption of lattice-based structures in soft robotics creates a need for advanced sensing solutions capable of monitoring their global deformation, particularly compression and extension. In this work, we address this challenge by introducing a novel optical sensor based on two patterned waveguides arranged in an ellipsoidal geometry. This Bidirectional Optical sensor for Actuation Tracking (BOAT) is seamlessly co-printed with a lattice structure actuated by an embedded pneumatic artificial muscle (PAM), and its performance is assessed. During PAM elongation or contraction, the bending of the embedded BOAT waveguides induces output signal variations that enable a clear discrimination between compression and extension states. The designs of both each specific waveguide structure (by surface patterning) and of the sensorized lattice-based unit embedding two BOATs are supported by numerical simulations. Experimental calibration over 100 consecutive pressure cycles ranging from +50 kPa to −-40 kPa demonstrates a highly repeatable response, allowing a reliable distinction between extension and compression. Finally, sensor feedback is used to implement a digital shadow, enabling continuous synchronization between the whole sensorized unit and its virtual counterpart. These results establish BOAT as a powerful and reliable approach for deformation monitoring in soft lattice-based robotic systems.
May 18, 2026cs.RO

A Dexterous and Compliant Gripper With Soft Hydraulic Actuation for Microgravity Manipulation

Astrobee's existing one-degree-of-freedom (DOF) underactuated compliant claw gripper enables perching on the International Space Station (ISS), but provides limited capability for continuous dexterous manipulation. More complex microgravity tasks require an end-effector that can maintain stable contact while limiting disturbance to the free-flying base, since contact forces directly couple into base motion. This article presents the integration of DexCoHand, a dexterous and compliant two-finger, 6-DOF gripper, with the Astrobee free-flying robot for microgravity manipulation. The system is evaluated in MuJoCo using Astrobee's standard handrail perching sequence, including approach, perching, and subsequent pan and tilt motions. Compared with Astrobee's existing gripper, DexCoHand preserves the commanded pan and tilt motions while reducing unintended cross-axis base motion. Hardware experiments on Earth further demonstrate DexCoHand's dexterous manipulation capabilities and its potential for more adaptable intelligent manipulation tasks.
May 13, 2026cs.RO

Design of Magnetic Continuum Robots with Tunable Force Response Using Rotational Ring Pairs

In this paper, we discuss a novel continuum robot design that enables the online tuning of the magnetic response at its tip. The proposed method allows for the change of both effective magnetic direction and intensity, introducing steering DOF without the need to control the external fields. This is unattainable with classical designs, which rely on fixed internal magnetic content and steer solely under the effect of a controllable magnetic field. The proposed robot design can be used in both controllable and fixed magnetic fields, potentially widening the clinical applicability of these robots. We experimentally show a max tip deflection of 33.8 mm from the resting state (23 % of the length of the robot). We discuss a model based on modified beam theory that captures the mechanical behavior of the continuum robot, with a mean absolute tip tracking error of 1.86 mm (1.2 % of the length) and maximum errors of less than 4.8 mm (3.2 % of the length) for all experimental points.
May 12, 2026cs.RO

BiPneu: Design and Control of a Bipolar-Pressure Pneumatic System for Soft Robots

Positive-negative pressure regulation is critical to soft robotic actuators, enabling large motion ranges and versatile actuation modes. However, achieving high-performance regulation across both pressure polarities remains challenging due to asymmetric inflation-deflation dynamics, valve nonlinearities, and switching-induced flow disturbances. This paper presents BiPneu, a scalable and cost-efficient multi-channel bipolar-pressure pneumatic system for soft robots that enables wide-range, accurate, and responsive pressure regulation while providing seamless compatibility with high-level software ecosystems. A dual-mode sliding-mode controller (DM-SMC) with hysteresis-supervised mode selection is proposed based on a hybrid electro-pneumatic model. Extensive simulation and experiments demonstrate the superior performance of DM-SMC in tracking step and sinusoidal pressure references compared with both advanced model predictive controllers and well-tuned PID controllers. Experimental results show average absolute errors of 1.44 kPa in multi-step tests and 4.23 kPa in sinusoidal tracking, corresponding to reductions of 11.9% and 35.6% relative to PID control, along with improved control effort, valve switching rate, and transient response. Robustness of DM-SMC is further verified on a bellow actuator with pressure-dependent volume. Finally, BiPneu's capability is demonstrated via two soft robotic examples, quick ball-maneuvering with a soft parallel manipulator and real-time finite element method (FEM)-based teleoperation of a soft bellows actuator.
May 12, 2026cs.RO

Introducing Environmental Constraints to Grasping Strategies for Paper-Like Flexible Materials Using a Soft Gripper

Robotic manipulation of flexible objects is widely required in both industrial and service applications. Among such objects, paper-like materials exhibit distinct mechanical characteristics compared to cloth, being more sensitive to compressive stress, where minor variations in physical properties can significantly affect grasping. This study systematically investigates grasping strategies for paper-like materials using a universal soft gripper by exploiting environmental constraints. Based on manipulation primitives employed in existing grasping strategies, we proposed systematic grasping strategies for flexible materials by exploiting environmental constraints and analyzed their mechanical and kinematic models. To investigate the influence of materials and working conditions on grasping, an evaluation system for measuring grasping force and success rate was defined and experimentally evaluated. Finally, we summarized the specific workspaces and characteristics of different strategies that can satisfy various task requirements and lead to potential applications in household service robots for grasping planar flexible objects.
May 9, 2026cs.RO

Continuum Robot Modeling with Action Conditioned Flow Matching

Predicting the shape of tendon driven continuum robots (TDCRs) at steady state from actuation remains challenging due to continuous deformation, complex tendon routing, compliance, friction, and fabrication variability. In this paper, we address this problem as kinematic self modeling conditioned on action. We present a lightweight 3D printed TDCR hardware platform and an RGB-D data collection pipeline with multiple cameras, and we learn a point cloud flow matching model that maps motor actuation states to the robot's settled 3D geometry. The model is trained from randomly sampled quasi static configurations and evaluated on test motor commands within the same TDCR design family and actuation range. We compare against prior 3D deformable object and robot self modeling approaches in both MuJoCo simulation and real hardware experiments. Experiments on simulated 2-, 3-, and 5-module TDCRs and real 2- and 3-module robots show improved shape prediction accuracy under CD and EMD metrics. We further show in simulation that the same conditional formulation generalizes to tip payload as a conditioning input, enabling payload conditioned steady-state shape prediction. These results demonstrate a data driven self modeling framework for quasi static TDCR geometry prediction.
May 7, 2026cs.RO

Cycle-resolved Cephalopod-Inspired Pulsed-Jet Robot With High-Volume Expulsion and Drag-Reduced Gliding

Cephalopod pulsed-jet locomotion is not a single isolated expulsion event, but a coordinated cycle involving jet expulsion, passive gliding, and mantle refilling. Inspired by this cycle-resolved biological strategy, this paper presents a cephalopod-inspired pulsed-jet robot with a rigid-soft hybrid origami mantle that enables large, actively driven, and geometry-guided body deformation. The proposed mantle integrates rigid folding panels with a compliant silicone framework, allowing a 75% effective cavity-volume reduction during expulsion and reducing the projected cross-sectional drag area by approximately 75.7% in the contracted gliding configuration. Using this platform, we formulate a cycle-resolved framework to separately investigate how expelled volume, glide duration, and refill pathway influence whole-cycle locomotion performance. Experiments show that the robot reaches a peak speed of approximately 0.5 m/s (3.8 BL/s) and an average speed exceeding 0.2 m/s (1.5 BL/s) within the first jetting cycle. The results further demonstrate the roles of high expelled-volume-ratio contraction in speed generation, reduced-drag-area gliding under different glide durations, and mantle-aperture-inspired passive inlet valves in assisting refill. This work provides both a robotic implementation of actively deformable cephalopod-like jet propulsion and a unified experimental platform for studying expulsion-gliding-refilling dynamics in pulsed-jet locomotion.
May 6, 2026cs.RO

3D Printing of Passively Actuated Self-Folding Robots with Integrated Functional Modules

We introduce an elastic-driven self-folding approach that fabricates robots directly from flat 3D-printed conductive PLA nets. Elastic bands routed through printed hooks store energy that folds the sheet into programmed 3D geometries, while the flat state allows accurate placement of electronics and magnets before deployment. The same substrate doubles as electrodes for capacitive touch and supports a reusable platform I/O palette with Hall sensors and eccentric rotating mass (ERM) motors for docking detection and vibration actuation. We also derive a closed-form folding model that balances hinge stiffness with elastic band moment to predict equilibrium fold angles; experiments validate the model and yield a design map linking hinge thickness, band size, and hook spacing to target angles. Using this workflow we realize multiple polyhedral modules and demonstrate three applications: a cube that highlights the potential of self-folding for scalable modular robot collectives, a deployable gripper, and a tendon-driven finger. The method is low cost, stimulus-free, and integrates actuation and sensing.
May 2, 2026eess.SY

Quasi-Static Control of Discrete Cosserat Rod

In this paper, we design feedback control laws for soft robots modelled using the Cosserat rod, which is spatially discretised using the Piecewise Constant Strain (PCS) approach. The PCS approach transforms the nonlinear PDEs describing the Cosserat rod to a system of nonlinear ODEs. This simplification results in a model describing soft robots which is similar to the serial rigid-link manipulators. We design feedback control laws for the quasi-static PCS model by using external wrenches as control inputs. The control laws are designed based on state-feedback linearisation in strain and task spaces. An extensive set of numerical results demonstrates the performance of the control laws for end-effector trajectory tracking and shape control of soft robots.
May 1, 2026cs.RO

Topology-Driven Anti-Entanglement Control for Soft Robots

In the field of precision manufacturing in complex constrained environments, the role of soft robots is increasingly prominent, and the realization of anti-winding control based on multi-intelligent body reinforcement learning has become a research hotspot. One of the core problems at present is to coordinate multiple robots to complete the unwinding operation in a highly constrained environment. The existing distributed training framework faces some observability challenges in high-density barrier and unstable environments, resulting in poor learning results. This paper proposes a topology-driven Multi-Agent Reinforcement Learning (TD-MARL) framework to coordinate multi-robot systems to avoid entanglement. Specifically, the critical network adopts centralized learning, so that each intelligent body can perceive the strategies of other intelligent bodies by sharing the topological state, thus alleviating the training instability caused by complex interactions; eliminating the demand for communication resources between robots through distributed execution, Upgrade system reliability; the integrated topological security layer uses topological invariants to accurately assess and mitigate the risk of entanglement to avoid the strategy from falling into local difficulties. Finally, the full simulation experiments carried out in the real simulation environment show that the method is better than the current advanced deep reinforcement learning (DRL) method in terms of convergence and anti-winding effect.
May 1, 2026cs.RO

A Model-based Visual Contact Localization and Force Sensing System for Compliant Robotic Grippers

Grasp force estimation can help prevent robots from damaging delicate objects during manipulation and improve learning-based robotic control. Integrating force sensing into deformable grippers negotiates trade-offs in cost, complexity, mechanical robustness, and performance. With the growing integration of RGB-D wrist cameras into robotic systems for control purposes, camera-based techniques are a promising solution for indirect visual force estimation. Current approaches mostly utilize end-to-end deep learning, which can be brittle when generalizing to new scenarios, while existing model-based approaches are unsuited to grasping and modern grasper geometries. To address these challenges, we developed a model-based visual force sensing approach integrating an iterative contact localization with generalization to unseen objects. The system extracts structural key points from wrist camera RGB-D images of deforming fin-ray-shaped soft grippers, and uses these key points to define parameters of an inverse finite element analysis simulation in Simulation Open Framework Architecture. The iterative contact localization sub-system utilizes a deep learning-based online 3D reconstruction and pose estimation pipeline to dynamically update contact location, and is robust to visual occlusion and unseen objects. Our system demonstrated an average root mean square error of 0.23 N and normalized root mean square deviation of 2.11% during the load phase, and 0.48 N and 4.34% over the entire grasping process when interacting with different objects under various conditions, showcasing its potential for real-time model-based indirect force sensing of soft grippers.
Apr 29, 2026cs.RO

Stochastic Entanglement of Deterministic Origami Tentacles For Universal Robotic Gripping

Origami-inspired robotic grippers have shown promising potential for object manipulation tasks due to their compact volume and mechanical flexibility. However, robust capture of objects with random shapes in dynamic working environments often comes at the cost of additional actuation channels and control complexity. Here, we introduce a tendon-driven origami tentacle gripper capable of universal object gripping by exploiting a synergy between local, deterministic deformation programming and global, stochastic entanglements. Each origami tentacle is made by cutting thin Mylar sheets; It features carefully placed holes for routing an actuation tendon, origami creases for controlling the deformation, and a tapered shape. By tailoring these design features, one can prescribe the shrinking, bending, and twisting deformation, eventually creating deterministic coiling with a simple tendon pull. Then, when multiple coiling tentacles are placed in proximity, stochastic entanglement emerges, allowing the tentacles to braid, knot, and grip objects with random shapes. We derived a simulation model by integrating origami mechanics with Cosserat rods to correlate origami design, tendon deformation, and their collective gripping performance. Then, we experimentally tested how these coiling and entangling origami tentacles can grasp objects under gravity and in water. A stow-and-release deployment mechanism was also tested to simulate in-orbit grasping. Overall, the entertaining origami tentacle gripper presents a new strategy for robust object grasping with simple design and actuation.
Apr 28, 2026cs.RO

Improving Sensing Coverage and Compliance of 3D-Printed Artificial Skins Through Multi-Modal Sensing and Soft Materials

3D-printed artificial skins are a scalable approach to whole-body tactile and proximity coverage, but prior implementations have been limited to unimodal sensing and rigid materials. To improve the practical usability of 3D-printed artificial skins, we present a hybrid time-of-flight (ToF) and self-capacitance (SC) sensing skin that demonstrates multi-modal sensing integration, soft compliant coverings for impact absorption and pressure sensing, and a streamlined electrical interface between printed conductive traces and external electronics. We show that combining ToF and SC modalities enables contact detection, scene reconstruction, and pressure-correlated tactile responses with the compliant covering by deploying six artificial skin units with 40 sensing elements over an FR3 robot arm.
Apr 23, 2026cs.RO

A Compact Peristaltic Pump Based on Magneto-Elastic Hysteresis with Single Pneumatic Control

Pumping fluids is fundamental to a wide range of industrial, environmental, and biomedical applications. Among various pumping mechanisms, peristaltic pumps enable efficient and safe fluid transport by deforming an elastic tube without direct contact with the working fluid. Although previous studies have introduced mechanical, pneumatic, or magnetic actuations to drive membrane deformation, these approaches often lead to complex pump architectures and control schemes. In this study, we present a soft membrane pump that achieves peristaltic motion through a single pneumatic input combined with an embedded passive magnet. The actuation mechanism and system dynamics were analyzed and simplified through modeling. Numerical simulations were conducted to predict the internal fluid flow, and the magneto-elastic hysteresis behavior observed in the simulations was successfully validated by experiments with a proof-of-concept prototype.
Apr 20, 2026cs.RO

Muscle-inspired magnetic actuators that push, pull, crawl, and grasp

Functional magnetic composites capable of large deformation, load bearing, and multifunctional motion are essential for next-generation adaptive soft robots. Here, we present muscle-inspired magnetic actuators (MMA), additively manufactured from a thermoplastic/permanent magnet polyurethane/Nd2Fe14B (TPU/MQP-S) composite using laser powder bed fusion (LPBF). By tuning the laser-energy scale between 1.0 and 3.0, both mechanical stiffness and magnetic response are precisely controlled: the tensile strength increases from 0.28 to 0.99 MPa while maintaining 30-45% elongation at break. This process enables the creation of 0.5 mm-thick flexural hinges, which reversibly bend and fold under moderate magnetic fields without damage. Two actuator types are reported showing the system versatility. The elongated actuator with self-weight of 1.57 g, magnetized in its contracted state, achieves linear contraction under a 500 mT field, lifting 50 g (32x its own weight) and sustaining performance over at least 50 cycles. Equipped with anisotropic frictional feet, it supports movement of a magnetic crawling robot that achieves up to 100% locomotion success on textured substrates. The expandable actuator exhibits reversible opening and closing under a 300 mT field, reliably grasping and releasing different objects, including soft berries and rigid 3D printed geometries. It can also anchor in a tube while holding suspended 50 g loads. This work demonstrates a LPBF-based strategy to program both stiffness and magnetization within a single material system, enabling remotely driven, reconfigurable, and fatigue-resistant soft actuators. The approach opens new possibilities for force controlled, multifunctional magnetic soft robots for adaptive gripping, locomotion, and minimally invasive manipulation of biomedical tools.
Apr 19, 2026cs.RO

Modeling, Control and Self-sensing of Dielectric Elastomer Soft Actuators: A Review

Dielectric elastomer actuators (DEAs) have garnered extensive attention especially in soft robotic applications over the past few decades owing to the advantages of lightweight, large strain, fast response and high energy density. However, because the DEAs suffer from nonlinear elasticity, inherent viscoelastic creep, hysteresis and vibrational dynamics, the modeling, control and self-sensing of DEAs are challenging, thereby hindering the practical applications of DEAs. In order to address these challenges, numerous studies have been conducted. In this review, various physics-based modeling methods and phenomenological modeling methods for predicting the electromechanical response of DEAs are presented and discussed. Different control methods for DEAs are reviewed, which are classified into open-loop feedforward control, feedback control, feedforward-feedback control and adaptive feedforward control. Physics-based self-sensing methods and data-driven self-sensing methods for reconstructing the DEA displacement without the need for additional sensors are discussed. Finally, the existing problems and new opportunities for the further studies are summarized.
Apr 17, 2026cs.RO

A Reconfigurable Pneumatic Joint Enabling Localized Selective Stiffening and Shape Locking in Vine-Inspired Robots

Vine-inspired robots achieve large workspace coverage through tip eversion, enabling safe navigation in confined and cluttered environments. However, their deployment in free space is fundamentally limited by low axial stiffness, poor load-bearing capacity, and the inability to retain shape during and after steering. In this work, we propose a reconfigurable pneumatic joint (RPJ) architecture that introduces discrete, pressure-tunable stiffness along the robot body without compromising continuous growth. Each RPJ module comprises symmetrically distributed pneumatic chambers that locally increase bending stiffness when pressurized, enabling decoupling between global compliance and localized rigidity. We integrate the RPJs into a soft growing robot with tendon-driven steering and develop a compact base station for mid-air eversion. System characterization and experimental validation demonstrate moderate pressure requirements for eversion, as well as comparable localized stiffening and steering performance to layer-jamming mechanisms. Demonstrations further show that the proposed robot achieves improved shape retention during bending, reduced gravitational deflection under load, cascading retraction, and reliable payload transport up to 202 g in free space. The RPJ mechanism establishes a practical pathway toward structurally adaptive vine robots for manipulation-oriented tasks such as object sorting and adaptive exploration in unconstrained environments.
Mar 19, 2026cs.RO

Tendon-Actuated Robots with a Tapered, Flexible Polymer Backbone: Design, Fabrication, and Modeling

This paper presents the design, modeling, and fabrication of 3D-printed, tendon-actuated continuum robots featuring a flexible, tapered backbone constructed from thermoplastic polyurethane (TPU). Our scalable design incorporates an integrated electronics base housing that enables direct tendon tension control and sensing via actuators and compression load cells. Unlike many continuum robots that are single-purpose and costly, the proposed design prioritizes customizability, rapid assembly, and low cost while enabling high curvature and enhanced distal compliance through geometric tapering, thereby supporting a broad range of compliant robotic inspection and manipulation tasks. We develop a generalized forward kinetostatic model of the tapered backbone based on Cosserat rod theory using a Newtonian approach, extending existing tendon-actuated Cosserat rod formulations to explicitly account for spatially varying backbone cross-sectional geometry. The model captures the graded stiffness profile induced by the tapering and enables systematic exploration of the configuration space as a function of the geometric design parameters. Specifically, we analyze how the backbone taper angle influences the robot's configuration space and manipulability. The model is validated against motion capture data, achieving centimeter-level shape prediction accuracy after calibrating Young's modulus via a line search that minimizes modeling error. We further demonstrate teleoperated grasping using an endoscopic gripper routed along the continuum robot, mounted on a 6-DoF robotic arm. Parameterized iLogic/CAD scripts are provided for rapid geometry generation and scaling. The presented framework establishes a simple, rapid, and reproducible pathway from parametric design to controlled tendon actuation for tapered, tendon-driven continuum robots manufactured using fused deposition modeling 3D printers.
Mar 10, 2026cs.RO

Octopus-inspired Distributed Control for Soft Robotic Arms: A Graph Neural Network-Based Attention Policy with Environmental Interaction

This paper proposes SoftGM, an octopus-inspired distributed control architecture for segmented soft robotic arms that learn to reach targets in contact-rich environments using online obstacle discovery without assuming full obstacle geometry at the start of each episode. SoftGM formulates each arm section as a cooperative agent and represents the arm-environment interaction as a graph. SoftGM uses a two-stage graph attention message passing scheme following a Centralised Training Decentralised Execution (CTDE) paradigm with a centralised critic and decentralised actor. We evaluate SoftGM in a Cosserat-rod simulator (PyElastica) across three tasks that increase the complexity of the environment: obstacle-free, structured obstacles, and a wall-with-hole scenario. Compared with six widely used MARL baselines (IDDPG, IPPO, ISAC, MADDPG, MAPPO, MASAC) under identical information content and training conditions, SoftGM matches strong CTDE methods in simpler settings and achieves the best performance in the wall-with-hole task. Robustness tests with observation noise, single-section actuation failure, and transient disturbances show that SoftGM maintains comparable performance under non-ideal simulated conditions while keeping control effort bounded, suggesting that selective contact-relevant information routing improves resilience in the tested settings.
Mar 10, 2026cs.RO

Receptogenesis in a Vascularized Robotic Embodiment

Equipping robotic systems with the capacity to generate ex novo\textit{ex novo} hardware during operation extends physical adaptability. Unlike modular systems that rely on discrete component integration pre- or post-deployment, we envision physical adaptation through continuous in-body development via hardware synthesis. Drawing inspiration from circulatory systems that redistribute mass and function in biological organisms, we utilize fluidics to restructure the material interface, a capability currently unmatched in robotics. Here, we realize this proof-of-concept hardware generation through a vascularized robotic composite designed for programmable material synthesis, demonstrated via receptogenesis - the on-demand construction of sensors. By coordinating the fluidic transport of precursors with external localized UV irradiation, we drove an in situ\textit{in situ} photopolymerization that chemically reconstructed the vasculature from the inside out. This reaction converted precursors with photolatent initiator into a solid dispersion of UV-sensitive polypyrrole in PETG, establishing a sensing modality validated by a characteristic decrease in electrical impedance. The newly synthesized sensor closed a local control loop in real time to regulate wing flapping in a moth-inspired robotic demonstrator. Our work is a proof-of-concept materials basis for ex novo\textit{ex novo} hardware generation in a vascularized composite - a step towards situated robots adapting to environmental cues.
Mar 9, 2026cs.RO

Unified Structural-Hydrodynamic Modeling of Underwater Underactuated Mechanisms and Soft Robots

Underwater robots are widely deployed for ocean exploration and manipulation. Underactuated mechanisms are advantageous in aquatic environments because reducing actuator count lowers motor-leakage risk while introducing inherent mechanical compliance. However, accurate modeling of underwater underactuated and soft robotic systems remains challenging, as it requires identifying high-dimensional structural and hydrodynamic parameters. In this work, we propose a trajectory-driven global optimization framework for unified structural-hydrodynamic modeling of underwater multibody systems. Inspired by the Covariance Matrix Adaptation Evolution Strategy (CMA-ES), the proposed approach simultaneously identifies coupled elastic, damping, and distributed hydrodynamic parameters through trajectory-level matching between simulated and experimental motion. This enables high-fidelity reproduction of underactuated mechanisms and compliant soft robotic systems in underwater environments, using as little as a single video recording. We first validate the framework on a link-by-link underactuated multibody mechanism, demonstrating accurate identification of distributed hydrodynamic coefficients, with normalized end-effector position error below 5% across multiple trajectories, initial conditions, and both active-passive and fully passive configurations. The modeling strategy is further validated on an asymmetric octopus-inspired soft arm, confirming its effectiveness for compliant soft robotic systems. Finally, eight identified arms are assembled into a swimming octopus robot, where the unified parameter set enables realistic whole-body behavior without additional retuning. These results demonstrate the scalability and transferability of the proposed structural-hydrodynamic modeling framework across underwater underactuated and soft robotic systems.
Feb 20, 2026cs.RO

Design and Biomechanical Evaluation of a Lightweight Low-Complexity Soft Bilateral Ankle Exoskeleton

Many people could benefit from exoskeleton assistance during gait, for either medical or nonmedical purposes. But exoskeletons bring added mass and structure, which in turn require compensating for. In this work, we present a lightweight, low-complexity, soft bilateral ankle exoskeleton for plantarflexion assistance, with a shoe attachment design that can be mounted on top of any pair of shoes. Experimental tests show no significant difference in lower limb kinematics and kinetics when wearing the exoskeleton in zero-torque mode relative to not wearing an exoskeleton, showing that our device does not obstruct healthy gait, and proving it as a compliant and comfortable device, promising to provide effective assistance. Hence, a control system was developed, and additional tests are underway.
Feb 3, 2026cs.RO

Soft Swing-up: Benchmarking Model-Based Optimal Control for Rigid-Soft Underactuated Systems

Continuum soft robots are inherently underactuated and subject to intrinsic input constraints, making dynamic control particularly challenging, especially in hybrid rigid-soft robots. While most existing methods focus on quasi-static behaviors, dynamic tasks such as swing-up require accurate exploitation of continuum dynamics. This has led to studies on simple low-order template systems that often fail to capture the complexity of real continuum deformations. Model-based optimal control offers a systematic solution; however, its application to rigid-soft robots is often limited by the computational cost and inaccuracy of numerical differentiation for high-dimensional models. Building on recent advances in the Geometric Variable Strain model that enable analytical derivatives, this work investigates three optimal control strategies for underactuated soft systems -- Direct Collocation, Differential Dynamic Programming, and Nonlinear Model Predictive Control -- to perform dynamic swing-up tasks. To address stiff continuum dynamics and constrained actuation, implicit integration schemes and warm-start strategies are employed to improve numerical robustness and computational efficiency. The methods are evaluated in simulation on three Rigid-Soft and high-order soft benchmark systems -- the Soft Cart-Pole, the Soft Pendubot, and the Soft Furuta Pendulum -- highlighting their performance and computational trade-offs.
Jan 27, 2026cs.RO

Tactile Memory with Soft Robot: Robust Object Insertion via Masked Encoding and Soft Wrist

Tactile memory, the ability to store and retrieve touch-based experience, is critical for contact-rich tasks such as key insertion under uncertainty. To replicate this capability, we introduce Tactile Memory with Soft Robot (TaMeSo-bot), a system that integrates a soft wrist with tactile retrieval-based control to enable safe and robust manipulation. The soft wrist allows safe contact exploration during data collection, while tactile memory reuses past demonstrations via retrieval for flexible adaptation to unseen scenarios. The core of this system is the Masked Tactile Trajectory Transformer (MAT3^\text{3}), which jointly models spatiotemporal interactions between robot actions, distributed tactile cues, force-torque measurements, and proprioceptive signals. Through masked token prediction, MAT3^\text{3} learns rich spatiotemporal representations by inferring missing sensory information from context, autonomously extracting task-relevant features without explicit subtask segmentation. We validate our approach on peg-in-hole tasks with diverse pegs and conditions in real-robot experiments. Our extensive evaluation demonstrates that MAT3^\text{3} achieves higher success rates than the baselines over all conditions and shows remarkable capability to adapt to unseen pegs and conditions.
Jan 20, 2026cs.RO

Highly Deformable Proprioceptive Membrane for Real-Time 3D Shape Reconstruction

Reconstructing the three-dimensional (3D) geometry of object surfaces is essential for robot perception, yet vision-based approaches degrade under low illumination or occlusion. This limitation motivates the design of a proprioceptive membrane that conforms to the surface of interest and infers 3D geometry by reconstructing its own deformation. Conventional deformation-aware membranes typically rely on resistive, capacitive, or magneto-sensitive mechanisms, but can suffer from structural complexity, limited compliance during large-scale deformation, and susceptibility to electromagnetic interference. This work presents a soft, flexible, and stretchable proprioceptive silicone membrane based on optical waveguide sensing. The membrane integrates edge-mounted LEDs and centrally-distributed photodiodes (PDs) within a multilayer elastomeric composite. Rich deformation-dependent light-intensity signals are decoded by a data-driven model to recover the membrane geometry. Real-time reconstruction is demonstrated on a customized 140 mm square membrane at an end-to-end update rate of 90 Hz, achieving an average reconstruction error of 1.307 mm for out-of-plane deformation of up to 25 mm. The proposed sensor also demonstrates accurate reconstruction under large in-plane deformation, achieving reliable shape recovery up to 75% strain with an average Chamfer distance of 1.214 mm. The proposed framework provides a scalable, robust, and low-profile solution for global shape perception in deformable robotic systems.
Nov 24, 2025cs.RO

Soft Pneumatic Grippers: Topology optimization, 3D-printing and Experimental validation

Typically, heuristic/trial-based approaches are used to design soft pneumatic grippers (SPGs). This paper presents a systematic topology optimization framework for developing SPGs. The design-dependent nature of actuating load is modeled using Darcy's law with an added drainage term. A 2D soft arm unit is then optimized as a compliant mechanism under pneumatic loading. To ensure the design is robust and manufacturable, the problem is formulated as a min-max optimization, where output deformations of blueprint and eroded designs are considered. A volume constraint is imposed on the blueprint part, while a strain-energy constraint is enforced on the eroded part. The Method of Moving Asymptotes is employed to solve optimization problems. The optimized 2D part is extruded suitably to generate a 3D unit. Ten such 3D units are assembled to create a gripper arm. Both the optimized 2D unit and the corresponding gripper arm outperform their conventional rectangular designs under pneumatic loading, demonstrating the efficacy of the proposed approach. The arms are fabricated using the SLA printing technique. Numerical and experimental results are compared at different pneumatic loads. Four 3D-printed arms are integrated with a supporting structure to form the SPG. The gripping action of the SPG is demonstrated on objects with different weights, sizes, structures, stiffnesses, and shapes.