Tactile Perception

Tactile signals provide direct contact and force measurements that are essential for understanding physical interactions and enabling dexterous robotic manipulation. However, tactile sensing requires direct measurement at contact interfaces, making large-scale data collection reliant on intrusive, costly, and restrictive instrumentation. We present TouchSight, a monocular egocentric vision framework for dense full-hand contact force prediction that leverages 500 hours of pressure-glove recordings and extensive hand-object interaction (HOI) data. To address the appearance gap between gloved training data and bare-hand real-world scenarios, we construct TwinTouch-20H: 20 hours of paired visual data in which generative video models re-render gloved recordings as bare-hand observations against new backgrounds while preserving the original measured tactile labels. TouchSight predicts dense force from both gloved and generated bare-hand videos, outperforms prior contact prediction methods on OakInk2, qualitatively generalizes to natural bare-hand egocentric videos from unseen datasets, and improves consistently as glove supervision scales. These results demonstrate that dense tactile signals can be recovered from egocentric vision alone, without tactile instrumentation at capture time.

Automated inspection of small industrial components, including sub-centimetre-scale parts where defects are geometry-driven and poorly resolved by standard optical cameras, calls for sensing modalities that can directly capture fine surface geometry. Vision-based tactile sensors address this need by converting contact imprints into high-resolution image-like data compatible with existing deep-learning pipelines, yet their effective use for industrial anomaly detection (AD) remains largely unexplored. This work systematically evaluates unsupervised AD methods on a real tactile dataset covering five genuine industrial components acquired with a GelSight Mini sensor mounted on a collaborative robot. Four feature-embedding methods, SPADE, PaDiM, FAPM, and InReaCh, are compared under three validations explicitly motivated by the deployment constraints of contact-based sensing: a Good Fraction analysis establishing the minimum number of nominal contacts for stable performance, directly bounded by gel wear since every acquisition degrades the soft interface; a cross-position evaluation assessing generalization across different contact locations observing the same recurring surface pattern; and a low- versus high-resolution comparison evaluating the cost-benefit of higher-resolution tactile acquisition. Overall, this systematic benchmarking study provides practical guidance for researchers and practitioners adopting vision-based tactile sensing for industrial AD and shows how this modality can serve as a viable alternative for industrial quality-control tasks.

We present $N_0$-Foundation, a paradigm for tactile-enabled embodied manipulation, which integrates tactile sensing hardware, large-scale multimodal data, tactile representation learning, and standardized evaluation. First, we engineer the infrastructure for scalable data collection, including a vision-based tactile sensor, a tactile Universal Manipulation Interface (UMI), and a synchronized visuo-tactile data collection system supporting both robot embodiments and UMI-based demonstrations. Leveraging this infrastructure, we construct NeoData, which contains more than 30000 hours of synchronized visual and tactile demonstrations, spanning six embodiments, 450 tasks, and billions of paired RGB and tactile frames collected through a mixture of real-robot teleoperation and UMI-based demonstrations. To facilitate open research, we further release OpenNeoData, a 5000-hour open-source subset of NeoData. The dataset addresses a central limitation of existing manipulation corpora, critical for deformable-object manipulation, precise assembly, delicate force control, and sustained surface interaction. Capitalizing on the large-scale, heterogeneous tactile measurements, we propose NeoForce, a visuo-tactile representation model that learn transferable tactile representations across different sensor designs. To enable systematic evaluation of tactile embodied models built upon our infrastructure, datasets and tactile representations, we further propose a comprehensive benchmark, which combines the real-world NeoReal suite and the simulated NeoSim suite for standardized evaluation. Experiments across both suites show that policies benefit from the physical contact state rather than from the device-specific appearance of the tactile signal. We release the dataset, the representation, and the benchmark, aiming at supporting future work on tactile-enabled embodied manipulation.

We propose VT-MUSE, a Multimodal Unified SEquential representation learning framework for visuotactilemanipulation. Existing approaches often encode visual and tactile observations independently before fusion, limiting their ability to capture fine-grained cross-modal dependencies. Moreover, most methods focus on observations at the current time step and overlook the temporal evolution of contact. VT-MUSE addresses both limitations through a two-stage representation learning framework. In Stage I, modality specific encoders are jointly adapted via cross-modal temporal alignment and masked-view consistency. In Stage II, a conditional variational latent model processes masked visual sequences together with full tactile histories. Auxiliary decoders reconstruct the masked recent visual observations and predict tactile depth changes, encouraging the latent representation to retain both global visual context and local contact dynamics. The learned representation is subsequently integrated into a lightweight Transformer policy through gated cross-attention. On the simulation benchmark, VT-MUSE outperforms the strongest baseline evaluated on all tasks by 11 percentage points and also achieves substantial improvements in real-world experiments.

Delicate manipulation often involves transient and subtle collisions between a grasped object and the environment. While the human hand localizes these contacts effortlessly thanks to superior tactile sensitivity, robotic systems often lack the requisite resolution to acquire the information necessary for motion planning, resulting in clumsy manipulation or even task failure. Here, we propose transient extrinsic contact detection and ranging (TECDAR), a simple yet fast and efficient method for detecting and ranging extrinsic contact of grasped objects. Our design of gripper tips employs dynamic tactile sensing leveraging a single 2.5$\times$3 mm 6D inertial measurement unit. The sensor captures sub-millisecond tip deformations at a 7 kHz sampling rate, but operating on a data stream of only 84 KB/s. High bandwidth and compact data size enable the system to rapidly detect and localize contact between grasped objects and their surroundings. Specifically, fusing tactile data with robot pose via an extended Kalman filter enables fast and precise localization of extrinsic contact, reaching millimeter-level accuracy within 180 ms. Experimental results demonstrate that the system achieves an average localization accuracy of approximately 7,mm in both line-contact and point-contact localization tasks. Furthermore, this near-instantaneous localization enables the robot to rectify its trajectory on a millisecond scale, facilitating precise tool manipulation and enhanced perception of complex environments purely through tactile exploration and mapping. We envision such techniques advancing the future of robotics across domains requiring delicate manipulation, including precision assembly, surgical assistance, and autonomous exploration in touch-dominant environments. Project page: humitlab.github.io/TECDAR/

Humans achieve stable and adaptive grasps by seamlessly integrating visual perception and tactile feedback, a capability that remains challenging to replicate in robotic systems. Existing robotic grasping approaches predominantly rely on visual inputs and lack mechanisms for tactile-guided adaptation after contact, limiting robustness and generalization. To address this challenge, we propose a unified visuo-tactile-fusion grasping framework that integrates grasp generation, feasibility prediction, and adaptive refinement. At its core, our method introduces an efficient visuo-tactile representation that tightly fuses object geometry with tactile feedback by associating tactile signals with finger identities. This unified representation supports contact-aware grasp pose generation during planning and tactile-guided refinement after contact, enabling the system to reason about fine-grained finger-object interactions and adjust grasps dynamically. Comprehensive experiments in both simulation and real-world environments demonstrate that our approach significantly enhances grasp success rates and generalization across diverse objects.

Recent advances in robot learning for manipulation have increased the importance of collecting real-world demonstration data. However, existing robotic systems primarily focus on end-effector manipulation, making it difficult to teach and execute manipulation tasks involving body-surface contact with the arms and chest. This paper presents TWINS (Tactile Wearable Isomorphic Arm Networked System), a robotic system for manipulation involving body-surface contact. TWINS consists of a Wearable Dual-Arm Device, which is worn by the operator, and an Isomorphic Robot with the same joint configuration and external dimensions. Distributed tactile sensors embedded in the chest and arms enable the measurement of body-surface contact synchronized with joint motion. Using the Wearable Dual-Arm Device, we collected demonstrations for four manipulation tasks involving body-surface contact. We then trained imitation learning policies using the collected demonstrations and deployed them on the Isomorphic Robot, enabling manipulation guided by body-surface tactile observations. Experimental results demonstrate that TWINS provides a unified robotic system for demonstration, learning, and execution of manipulation involving body-surface contact. https://mmurooka.github.io/twins-project-page/

Physically grounded robot intelligence requires robots to perceive, reason about, and regulate their interactions with the physical world. This capability is particularly critical in contact-sensitive manipulation, where successful task execution depends not only on visual perception and motion generation, but also on force regulation and adaptive control. In this context, recent robot learning methods have made substantial progress by integrating force, tactile, vision, language, and proprioceptive sensing into learned manipulation policies. In parallel, many systems adopt multi-phase architectures that combine high-level policies, action-refinement modules, and low-level controllers to bridge semantic task understanding with reactive physical execution. Despite these advances, existing surveys have not explicitly reviewed force- and tactile-aware robot learning from a unified perspective that jointly captures multimodal sensing and multi-phase system design. This survey addresses this gap by proposing TF-ART, a Tactile/Force-Aware Robot learning Taxonomy for multimodal and multi-phase frameworks, which maps individual methods into a unified hierarchical structure. The framework characterizes how recent works organize observation modalities, encode and fuse heterogeneous sensory inputs, generate and refine actions across multiple phases, and connect learned policies to reactive robot-end control. Building on this methodological view, we further examine the task settings and infrastructure requirements of physical interaction, thereby integrating both algorithmic and practical perspectives on force- and tactile-aware robot learning.

In contact-rich manipulation, visual observations primarily guide motion in free space, whereas tactile observations become particularly informative during contact. However, standard Transformer-based visuo-tactile policies typically rely on either token concatenation or learnable gating. These approaches lack explicit contact-aware priors, making it difficult to efficiently learn effective cross-modal representations from demonstrations. To address this limitation, we propose CAAT, a lightweight contact-aware framework that explicitly incorporates contact priors through attention scaling and dynamic tactile masking. Specifically, CAAT emphasizes visual information before contact and tactile information during contact. It also suppresses static background tokens by comparing the current tactile observation with a non-contact reference. CAAT can be integrated into commonly used Transformer-based policies without modifying their action decoders. In simulation, integrating CAAT with ACT improves the average success rate by 18.0 percentage points over direct visuo-tactile fusion and by 10.0 percentage points over gated fusion. In real-world experiments using a visuo-tactile UMI platform, CAAT achieves an average success rate of 60.0% across ACT, Diffusion Policy, and $π_0$, outperforming the strongest baseline by an average of 21.1 percentage points. These results demonstrate that explicit contact priors and dynamic tactile masking are effective in improving visuo-tactile policy learning and task performance of diverse policy architectures. https://mrjiangjm.github.io/caat/

Contact-rich manipulation remains challenging because successful control depends on physical interaction cues that are often weakly observable from vision alone. Recent tactile world action models jointly model future visual observations and tactile signals to guide action generation, but how such futures should be structured for effective use by the action expert remains underexplored. Directly studying this question with learned world action models is difficult because end-to-end behavior entangles physically invalid visual futures, unreliable predictions, inaccurate or cross-modally inconsistent tactile forecasts, and an unreadable future-to-action interface. To make this interface independently studyable, we introduce Oracle Visuo-Tactile Foresight (OVTF), a controlled framework that supplies paired RGB and tactile futures from successful trajectories verified in simulation. By fixing the future provider, OVTF isolates the interface and asks a cleaner question: if the future is successful and physically executable, what representation allows the action expert to absorb its benefit? Within OVTF, we propose Asymmetric Phase-Local Future Memory (AFM), in which visual memory reads future vision, each tactile memory jointly attends to its own tactile stream and phase-aligned future vision, and cross-tactile access is blocked. We compare AFM with Modality-Isolated Future Memory (IFM), which removes visual-to-tactile access and processes each future modality independently. Across seven tasks on the UniVTAC simulation benchmark, AFM achieves 32.0% average success, compared with 23.7% for IFM and 14.9% for UniVTAC-ACT. This controlled comparison shows that selective phase-aligned visual-tactile routing provides a more actionable future-to-action bridge than complete modality isolation.

The sense of touch is central to manipulation, especially when vision is occluded or ambiguous. Although combining vision and touch improves manipulation, learning robust visuo-tactile policies requires substantial tactile data. Such data remains scarcer than visual data, because tactile sensors are fragile, specialized, and hard to standardize. To address this, we present Feature-Extracted Latent Tactile (FELT), a learning-based framework that synthesizes per-finger pressure tactile images from RGB observations, reducing the need for tactile-equipped data collection. FELT uses a large frozen visual encoder and a lightweight query decoder to predict tactile signals in a single feed-forward pass. To respect the physical topology of dual-finger tactile sensors, FELT decodes the left and right tactile sensor panels through separate branches, capturing the asymmetric contact patterns during interactions such as wiping, insertion, and in-hand rotation. At inference time, FELT only requires RGB data, allowing us to augment existing vision-only data with tactile observations, either as generated tactile images or as latent tactile features. Experiments on four contact-rich manipulation tasks demonstrate that both generated tactile images and latent tactile features improve policy success over vision-only baselines, with latent feature requiring no real tactile sensor during policy training or deployment. Supplementary material is available on our anonymous website: https://felt-tactile.github.io/.

This paper presents a vision-informed grasp force prediction framework for robotic handling of date fruits. Addressing the dual challenge of high detachment forces and low bruise thresholds, we first conduct mechanical characterization on date samples to define a safe grasping envelope and quantify the relationship between fruit geometry and bioyield stress. In this work, we develop a Vision-to-Force (V2F) pipeline that combines computer vision-based segmentation, active-contour refinement, and geometric feature extraction with a physics-informed residual neural network that augments a Hertz contact equation. The resulting model maps non-contact visual descriptors and cultivar metadata to predict a safe grasp force with mean validation performance of $R^2 \approx 0.7$ across unseen cultivar groups, which is a good result given the inherent mechanical variability of biological tissue. Experimental validation using a gripper and load cell indicates that the predicted forces enable stable manipulation of different types of date fruits, with residual deformations below 1 mm and no observable damage. These results show that pre-emptive, vision-driven force estimation% can replace slow and potentially damaging tactile exploration , enabling safer robotic handling of fragile fruits.

Vision and touch are complementary modalities essential for robotic perception and manipulation. While vision provides global object context, touch offers precise local information at contact points. Integrating these modalities for contact localization, i.e., predicting the location of touch on an object's surface, poses significant challenges due to the need for accurate spatial alignment between tactile data and visual geometry. To address this challenge, we propose VTLoc, a novel visual-tactile framework that localizes contact points from tactile readings using a 3D point cloud as visual input. VTLoc introduces two key components: a geometric multi-modal alignment module, which reconstructs a pseudo-point cloud from fused visual-tactile features and aligns it with the visual point cloud to enforce spatial consistencies across modalities; and an iterative localizing updater, which iteratively refines the predicted contact location using fused visual-tactile features. Evaluated on a new benchmark of 100 real-world objects, VTLoc improves single-touch contact localization by reducing local-to-global correspondence ambiguity.

Tactile-enhanced vision-language-action (VLA) policies have been introduced for contact-rich manipulation, where critical interaction states are often hidden from vision. Future tactile prediction is a promising way to use touch because it turns tactile outcomes into supervision for action-induced contact dynamics. Yet VLA policies contain representations with different roles, from perceptual encoding to motor prediction, making it unclear where this supervision should be applied. We study this as a representation-alignment problem. Through a linear probe analysis, we find that future tactile states are most predictable from intermediate action-expert features, rather than from vision-language features or final action states. Motivated by this observation, we introduce a lightweight Latent Tactile Predictor (LTP), which predicts compact future tactile embeddings from the identified intermediate representation. By avoiding direct prediction of noisy raw tactile signals, LTP provides an action-outcome grounding signal that aligns intermediate action representations with future contact consequences. Experiments on real-world contact-rich manipulation tasks show that representation-aligned tactile grounding outperforms less aligned or multi-interface tactile prediction, highlighting the importance of where tactile supervision is applied.

Computer-use agents are becoming capable software operators, but their interface to desktop applications is still often a brittle motor layer: they look at screenshots, predict coordinates, click, and hope that the visible state changed as intended. This collapses target grounding, action execution, and outcome verification into a single ambiguous operation. We present Tactile, an open-source tool layer that gives agents a more reliable "hands and feet" for desktop use. Tactile converts heterogeneous UI evidence--operating-system accessibility semantics, OCR-grounded text, and visual fallback regions--into action-grounded interface states: compact target candidates with source labels, roles or text, state, geometry, executable affordances, and verification cues. Agents operate through an observe-ground-act-verify loop that prefers native semantic actions when available, falls back to OCR-grounded coordinates when visible text is the best evidence, and keeps full provenance for replay and failure attribution. On macOSWorld-style tasks, adding Tactile improves Codex Success@100 from 41.1% to 50.0% overall and from 45.2% to 55.3% on accessibility-adapted tasks; a 96-task cross-agent subset shows consistent gains across Codex, Claude Code, OpenCode, and Goose. These results suggest that reliable computer use requires not only stronger models, but also a reusable execution substrate that exposes software actions as semantic, verifiable, and auditable objects rather than anonymous screen coordinates.

Dynamic loco-manipulation requires legged robots to coordinate whole-body motion while maintaining stable physical interaction with grasped objects under uncertain external forces. While tactile sensing has been widely studied for robotic manipulation, its role in dynamic whole-body control remains largely unexplored. Existing works without tactile feedback commonly grasp firmly rather than regulate the grasp according to the interaction. We propose TAC-LOCO, a tactile-augmented unified reinforcement learning framework that encodes tactile array observations from compliant grippers into a compact latent representation and joins it with proprioception for unified control of the legs, arm, and gripper. With effective grasp stability reward design, the policy learns to simultaneously track body velocity and end-effector trajectories, moderate grasp force, and prevent object slip under both gradual load changes and sudden release events. We deploy the policy zero-shot on a Unitree Go2 with an Interbotix WidowX 250 arm and tactile gripper, demonstrating dynamic tactile-informed loco-manipulation under varying external interactions, achieving a 47% reduction in grasping force and an object drop rate of less than 1%.

Neuromorphic visuo-tactile sensing offers a promising paradigm for low-latency and low-power robotic perception. However, existing systems still rely heavily on a host computer for event readout, preprocessing, or relaying prior to chip inference. This paper presents GelNeuro, a fully integrated sensing-computing visuo-tactile system that directly pairs a GelSight Mini-based optical tactile front end with the Speck2f neuromorphic system-on-chip (SoC). Contact-induced marker motions are captured as dynamic vision sensor (DVS) events and routed through the on-chip network to a spiking convolutional neural network (SCNN) classifier. To mitigate accuracy degradation during 8-bit deployment, a hardware-aware weight clamping strategy is introduced. Evaluated on a 15-class natural texture recognition task, hardware-in-the-loop testing on the physical chip achieves a 96.3% accuracy within an 80 ms inference window. Notably, the system consumes only 19.6 mW of board-level active power-over three orders of magnitude lower than conventional CPU/GPU baselines on the same benchmark. GelNeuro also exhibits robust generalization across unseen contact depths, demonstrating the viability of direct sensor-to-chip tactile recognition on edge neuromorphic hardware.

Among the five primary human senses, tactile is arguably the most fundamental to survival, as it enables the perception of physical contact and interaction in real-world environments. In this paper, we explore two key challenges of integrating tactile sensing into intelligent systems for multimodal reasoning: (i) insufficient modeling of dynamic tactile signals, which restricts reasoning over temporally evolving properties, and (ii) hallucination in tactile foundation models caused by the absence of explicit reasoning mechanisms, leading to unstable real-world inference. To address these challenges, we propose TacReasoner, a dynamic tactile-language framework for interactive reasoning in real-world scenarios. First, TacReasoner incorporates a Dynamic-aware Tactile Encoder to enhance the perception and representation of dynamic tactile signals. More importantly, we introduce TouchCoT-10k, the first tactile chain-of-thought dataset for structured reasoning over tactile inputs. Upon it, we establish DynTac-Bench to systematically evaluate dynamic tactile perception and real-world commonsense reasoning. Experimental results demonstrate that TacReasoner achieves competitive performance against state-of-the-art models across multiple datasets. Notably, despite using only 7B parameters, TacReasoner outperforms the 14B VTV-LLM model on most subtasks, highlighting its effectiveness and efficiency in tactile commonsense reasoning.

Tactile sensing can substantially improve contact-rich robotic manipulation, yet its practical deployment remains limited by the fragility, calibration requirements, and maintenance burden of tactile hardware. This raises a fundamental question: can robots benefit from tactile knowledge without requiring tactile sensors at deployment? We present TacImag, a tactile imagination framework that predicts tactile observations from vision and proprioception and uses the generated signals to guide manipulation policies. Trained from paired visuotactile demonstrations, TacImag enables touch-informed manipulation using only visual observations at test time. We evaluate TacImag on six simulated and four real-world manipulation tasks. Across simulation and real-world experiments, imagined tactile observations consistently improve manipulation performance without requiring tactile hardware. In real-world experiments, imagined force fields improve contact-sensitive tasks by 44.4% on average, whereas imagined tactile images improve texture-sensitive tasks by 23.3%, revealing that the effectiveness of tactile imagination depends strongly on the relationship between tactile representation and task requirements. Our results further suggest that tactile imagination does not simply recover missing tactile measurements. Instead, it acts as a form of contact-aware supervision that transforms subtle visual interaction cues into representations that are easier for manipulation policies to exploit.

Touch supplies the physical grounding needed to perceive intrinsic material properties, such as friction and compliance, that vision alone often cannot resolve. Recent efforts for equipping multimodal LLMs with this tactile sense, however, expose a zero-sum trade-off: the limited parameter budget of compact models forces a choice between acquiring the new sensory modality and preserving the established vision-language reasoning. We present Splash, a mask-isolated tactile alignment learning framework for MLLMs. Splash quantifies the significance of each pretrained parameter, and partitions the parameter space into a dormant and critical subspace. While the frozen critical subspace acts as a stable anchor to safeguard general visual knowledge, Splash updates the isolated dormant subspace to internalize tactile alignment towards LLMs. This selective, non-destructive expansion effectively prevents catastrophic forgetting and ensures non-destructive modality expansion. Extensive experiments show that Splash effectively achieves tactile reasoning without additional inference overhead in the LLM part, demonstrating state-of-the-art performance on visuo-tactile benchmarks, including SSVTP, TVL, and TacQuad, while preserving its original general-purpose capabilities.

Is the sense of touch a mechanism for human babies' learning of visual concepts? If so, can we quantify its importance, and to what extent do babies rely on their sense of touch for visual learning? To approach these questions in a principled way, we propose a structured coding system for baby-centric touch events, yielding a dataset of 264k two-second clips of touch events coded according to this system. Using this dataset, we pretrain developmentally grounded models that reveal promising insights into the nature of baby learning from touch.

Vision-language-action (VLA) models have achieved strong performance in many robotic manipulation tasks, yet remain limited in contact-rich dexterous manipulation. To overcome this limitation, recent vision-tactile-language-action (VTLA) methods incorporate tactile sensing into VLA models to provide direct contact information. However, they typically treat tactile signals as passive auxiliary inputs, making it difficult to model tactile semantics and future physical interactions. To this end, we propose a unified tactile learning framework for contact-rich manipulation that models tactile signals as dynamic interaction cues for both contact understanding and prediction. Specifically, we construct a unified tactile latent space and jointly model current tactile states and future contact changes through tactile chain-of-thought reasoning and coarse-to-fine future tactile prediction, thereby forming a state-aware and dynamics-aware tactile prior. Based on this prior, we introduce a tactile-action mixed controller that combines real-time and predicted tactile feedback to refine low-frequency action chunks with high-frequency corrections. Real-world experiments on four categories of contact-rich tasks, including adjustment, insertion, wiping, and assembly, under both clean and externally perturbed settings, show that our method improves success rate, manipulation accuracy, and contact robustness over existing methods, demonstrating its effectiveness in dexterous physical interaction.

Unified multimodal models (UMMs) have shown great promise in integrating understanding and generation across diverse modalities. However, existing research rarely extends this paradigm to the tactile domain, where both object-level semantics and sensor-level configurations jointly determine the meaning of touch. To address this gap, we propose UniTac, the first UMM designed for tactile understanding and generation. UniTac models the tactile process as a transition from non-contact to contact, capturing the physical interaction between sensors and objects through a dual-level representation that encodes both sensor and object attributes. For tactile understanding, UniTac introduces two tasks, object property description and sensor identification, to enhance reasoning over physical and cross-sensor information. For tactile generation, we design a two-stage training paradigm consisting of reconstruction and alignment, together with a sensor-prior-based sampling strategy that simulates realistic tactile contact. Trained on large-scale multi-sensor datasets, UniTac achieves state-of-the-art performance in tactile understanding and generates realistic tactile signals across sensors.

Vision-based tactile sensing converts contact-induced surface deformation into images, enabling robots to infer contact forces and fine surface textures that are not accessible through conventional vision alone. However, tactile images are sensor- and physics-specific, so effective architectures often require expert intuition and extensive manual iteration. Existing neural architecture search (NAS) pipelines can reduce this burden, but they are often computationally expensive and restricted to hand-designed search spaces, which limits architectural novelty and diversity. We introduce TacEvo, a self-evolving architecture discovery framework that improves network designs from downstream feedback. TacEvo uses an LLM to generate code-level mutations and crossovers, and a MAP-Elites quality-diversity loop that preserves diverse elite architectures while preferentially reusing prompts that consistently yield improvements. Exploration is guided by two behavioural descriptors, Architectural Diversity and Efficiency Ratio, which encourage coverage across structural variations and compute-size trade-offs. On ViTacTip force regression and grating classification, TacEvo achieves high autonomous generation reliability (96.0%/94.5% trainable) and improves best validation fitness over 20 generations by 56.1%/96.1%. In a 20-seed post-search high-fidelity evaluation, TacEvo matches the expert baseline on force prediction and outperforms it on fine-grained grating classification. These results suggest that LLM-driven self-evolving search constitutes a practical paradigm for AI-assisted scientific discovery in specialised robotic sensing.

Tactile sensors are inherently heterogeneous: a model trained on one sensor cannot be directly used on another, which limits learning contact-rich manipulation policies from diverse tactile data at scale. To bridge this gap, we propose the Heterogeneous Tactile Transformer (HTT), a framework that learns shared tactile representations across heterogeneous sensors. HTT consists of sensor-specific encoders and a shared transformer trunk, and is pretrained with per-modality masked reconstruction together with cross-modal alignment between paired sensors. Pretraining uses our novel Heterogeneous Paired Tactile (HPT) dataset, containing 1.6M synchronized paired frames across four vision- and array-based tactile sensors. Across distinct tactile perception and real-world manipulation tasks, HTT is shown to learn transferable representations that adapt to new tasks and previously unseen sensors. Dataset, code, and model checkpoints will be released upon publication at https://jxbi1010.github.io/htt-gh-page/.

Visuo-Tactile policies leveraging optical tactile sensors have shown great promise in contact-rich manipulation. These sensors achieve high spatial resolution and multi-dimensional force sensing by utilizing an internal camera to monitor the deformation of their elastic gel surface, thereby indirectly inferring tactile cues. Despite their advantages, extracting fine-grained contact states necessary for contact-rich manipulation remains an open challenge. Existing methods typically use either raw images or cumulative motion fields to represent tactile cues. However, both are prone to perception ambiguity. Raw tactile images mainly capture appearance changes, while cumulative motion fields only reflect the aggregate gel deformation. Consequently, distinct fine-grained contact states can exhibit highly similar patterns, making it difficult to explicitly distinguish subtle contact variations. To address this issue, we explore the dynamic priors of tactile motion and discover that the correlation between transient and cumulative motion can explicitly distinguish fine-grained contact states. Based on this insight, we propose a motion-aware tactile representation to facilitate contact-rich manipulation. Beyond tactile representation, effective fusion of tactile and visual modalities is also critical. Most existing fusion methods either directly concatenate features from each modality or train modality-specific networks separately and fuse their outputs. However, these strategies struggle to simultaneously model cross-modal interactions and preserve modality-specific characteristics. In this work, we take advantage of the Mixture-of-Transformers architecture and propose a unified modality-aware visuo-tactile policy that captures cross-modal complementarity while maintaining modality-specific properties.

World Action Models (WAMs) generate actions together with predicted futures, offering a powerful interface for robot decision making. In contact-rich manipulation, however, visually plausible futures can be physically incomplete: insertion, assembly, search, and reorientation often depend on slip, jamming, contact normals, or small alignment errors that are weakly visible or hidden in RGB. A natural solution is to predict future tactile states, however, we identify tactile pollution, a failure mode where unconstrained tactile-token injection degrades video and action prediction by forcing a visual dynamics model to absorb sparse, local, event-driven contact signals. To address this, we propose Tactile-WAM, a touch-aware WAM with a Tactile Asymmetric Attention Mechanism (TAAM). TAAM combines a VideoClean mask, which blocks video-query access to tactile key/value tokens while preserving action-query access, with a touch-aware bias for action attention. The VideoClean mask protects visual prediction while keeping contact information available for action generation; the touch-aware bias is derived from predicted touch changes and modulates action attention to tactile tokens during denoising. On ManiFeel, Tactile-WAM improves the mean success rate by 38.9% overall and by 86% on contact-rich tasks.

Vision-based tactile sensors (VBTSs) enable robots to infer contact geometry and force-related cues by imaging deformation through an internal camera, yet generalisation across sensor designs remains poorly understood. We present TacVerse, a multi-sensor dataset and benchmark for cross-sensor vision-based tactile perception. The dataset contains 106,800 tactile images from seven VBTSs and supports three downstream tasks: shape classification, grating classification, and force regression. Experiments are conducted under three settings: within-sensor training, zero-shot cross-sensor transfer, and few-shot adaptation. Strong within-sensor performance across all tasks indicates that the collected tactile observations are informative for the target objectives. Direct cross-sensor transfer, however, leads to substantial degradation. Shape classification is comparatively robust, whereas grating classification and force regression are more sensitive to sensor shift. Few-shot adaptation for force regression consistently improves performance on unseen target sensors but does not fully close the gap to within-sensor upper bounds. A representation study further shows that MAE (Masked Autoencoder) pretraining provides the most consistent gains across tasks and sensors. TacVerse provides a controlled testbed for studying sensor shift, data-efficient adaptation, and self-supervised learning in tactile perception.

Humans effortlessly locate and identify objects by touch alone, even without vision. In contrast, robotic systems rely heavily on vision and struggle with autonomous tactile exploration and object identification. We present TACTFUL, a vision-free tactile exploration framework that enables a multi-fingered robot to autonomously explore confined workspaces, discover objects through contact, and identify them via tactile reconstruction. Trained entirely on real hardware without simulation, our system learns a single policy that balances global workspace exploration with local surface refinement through a dynamic reward schedule. Our results demonstrate that tactile sensing, when paired with structured learning, can serve as an effective primary modality for object-level reasoning, achieving 77% success with 0.015 m average reconstruction error and outperforming baseline approaches on real-world objects.

Tactile sensing is critical for contact-rich dexterous manipulation, yet it remains unclear which tactile abstractions a policy needs and when richer tactile fields justify their hardware cost. This is hard to study empirically: each sensor effectively defines a new robot, and no lab can replicate the same learning experiment across all of them. We present Tactile Genesis, a GPU-parallel tactile sensor simulation platform that exposes binary contact, contact depth, per-taxel kinematic force/torque, elastomer marker displacement, geometry-aware proximity, contact audio, and a voxelized temperature field (the first of its kind in robot learning physics simulation platforms) under a common interface, with configurable placement, resolution, and a realistic noise model (drift, hysteresis, dead taxels, crosstalk). It scales past 20,000 parallel environments and 1,000 taxels on a single GPU, improving throughput by 3 to 20 times over previous tactile simulators. We train teacher-student policies on three dexterous tasks, ablating sensor type, placement, resolution, and noise, and verify transfer to the real XHand1. Proprioception alone is insufficient on every task. Sensor placement dominates sensor type: fingertip-only coverage trails whole-hand coverage by a wide margin, while adding the palm and proximal phalanges closes most of the gap to the privileged teacher. Resolution matters far less than coverage: placing 200 taxels across the whole hand suffices across tasks. We find that force/torque per taxel is consistently the most useful sensor type. These results give concrete guidance for both future tactile hardware design for improving robot hands and policy-side observation choice in dexterous manipulation. https://neuroagents-lab.github.io/tactile-genesis/

Establishing a universal benchmark for tactile representation learning in robotic manipulation remains challenging due to the diversity of tactile sensor designs, data formats, and robot embodiments. Rather than seeking to establish such, we explore a scalable and promising direction for future development: egocentric vision paired with full-hand tactile data. To this end, we introduce \textbf{HT-Bench}, a large-scale multi-task benchmark for dexterous full-hand tactile sensing, comprising 10M RGB frames and 7.8M tactile frames collected across 226 tasks. HT-Bench evaluates tactile representations from three key perspectives: whether they encode meaningful contact geometry, whether they can align tactile observations with visual information, and whether they generalize to unseen tasks. To assess these capabilities, HT-Bench includes four tasks: fine-grained tactile similarity retrieval, masked tactile inpainting, vision-to-tactile synthesis, and multimodal tactile frame prediction. We further propose \textbf{HandTouch}, a vector-quantized vision--tactile encoder that learns tactile representations through progressive spatial, cross-modal, and temporal training. Across HT-Bench, HandTouch consistently outperforms representative tactile encoder baselines, improving Recall@5 on fine-grained tactile similarity retrieval from 74.65% to 85.23%, reducing RMSE on masked tactile inpainting from 0.022 to 0.010, and increasing OOD cIoU on vision-to-tactile synthesis from 0.628 to 0.705. These results demonstrate the effectiveness of HandTouch and suggest that large-scale egocentric full-hand tactile data provides a scalable basis for evaluating and advancing tactile representation learning in dexterous manipulation.

Despite the success of vision-based generalist robotic policies, existing tactile-based policies remain tied to fixed embodiments and sensor setups. This is because tactile signals are highly heterogeneous across hardware, making cross-sensor generalization difficult. We present FTP-1,the first generalist foundation tactile policy pretrained to acquire transferable tactile manipulation abilities across diverse sensors and embodiments. FTP-1 supports varied tactile inputs, including image-, array-, and state-based signals, by using heterogeneous encoders to project them into unified morphology-aware latent tokens that are jointly modeled by a shared tactile Transformer expert. Pretrained on around 3,000 hours of tactile manipulation data aggregated from 26 data sources, spanning human and robot demonstrations across 21 sensors, FTP-1 learns tactile skills that transfer beyond the sensors seen during pretraining. Across downstream finetuning experiments spanning 5 hardware configurations, FTP-1 improves contact-rich manipulation on seen sensor setups by +17.2% and, surprisingly, transfers to two previously unseen tactile-sensor setups, achieving a +31% gain in success rate. FTP-1 establishes the first unified foundation baseline for tactile manipulation, providing future tactile policies with a shared model-level starting point. Pretrained models, datasets, training code and more visualization at https://ftp1-policy.github.io.

Touch is the primary medium through which humans interact with the environment. Currently, tactile learning mainly focuses on image-level pretraining or alignment. However, tactile signals correspond to local object contact, while research into scale alignment and holographic matching remains limited and proper datasets and benchmarks also lack. To bridge this gap, we first construct a data collection system to acquire a large-scale tactile dataset, with over 20 K tactile contacts from 505 real-world objects. Building on this dataset, we design a Vis-Tac Holographic Matching Benchmark to evaluate vision-tactile local-to-global alignment ability. Then we propose Vision-Tactile Patch Alignment (VTPA) methods for vision-tactile representation learning. Experiments demonstrate that these exceed the performance of methods without alignment and align with whole-object images.

Effective visuo-tactile integration is critical for robotic dexterous manipulation, especially when visual observations are unreliable or occluded. However, robustly aligning sparse, heterogeneous tactile measurements with dense visual representations remains a fundamental challenge. Most existing approaches require policies to learn cross-modal correspondences implicitly from limited demonstrations, without leveraging geometric priors. As a result, they are often data-inefficient and generalize poorly when visual observations are degraded. To address this limitation, we propose a framework that explicitly grounds physical contacts in the image domain. Using robot forward kinematics and camera calibration, we project tactile sensor locations directly onto the RGB image plane. We then render force-modulated Gaussian saliency maps to model spatial uncertainty arising from kinematic and calibration errors. By integrating these 2D spatial anchors through a zero-initialized conditioning architecture, our method injects physical contact priors into standard visual backbones while preserving pre-trained visual representations. We evaluate our method on six dexterous manipulation tasks in both simulation and the real world under severe visual occlusions. Real-world experiments show that explicit RGB-S grounding in the image domain improves real-world occluded manipulation success rates by $26.7$ percentage points over the strongest implicit visuo-tactile baseline, suggesting its improved spatial reasoning and robustness to occlusion. Project page: touch-as-saliency.github.io

Touch sensing is beneficial for solving a wide variety of manipulation tasks. While there exists a wide range of tactile sensors with different properties, exploiting the fusion of multiple heterogeneous tactile sensors to improve manipulation learning remains underexplored. We present Multi-Resolution Tactile Sensing (MiTaS), a representation framework that leverages multiple tactile sensors operating at different temporal resolutions in order to solve complex contact-rich manipulation tasks. We propose a novel architecture using modality-specific convolutional stems and transformer-based fusion that effectively fuses information from an RGB camera stream, a vision-based GelSight Mini sensor and a high-frequency event-based Evetac sensor. This multi-sensor representation then conditions a flow-matching policy for solving downstream tasks. Experimental results across five contact-rich manipulation tasks demonstrate the effectiveness of multi-resolution tactile features in imitation learning. MiTaS achieves an average success rate of 80 %, while vision-only (31 %) and visual-tactile (54 %) baselines cannot solve the task reliably. Co-training a visuo-tactile model with multi-tactile data boosts performance by over 10 % in certain tasks, without having access to the Evetac sensor during policy evaluation. A detailed sensor-reading and attention analysis reveals the importance of different sensors throughout task execution, validating our multi-resolution tactile sensing approach. Project Page: http://mitas-touch.github.io.

We address the challenge of engineering distributed haptic displays capable of reproducing multiple localized, independently addressable vibrations -- representing virtual tactile pixels -- at arbitrary locations on a surface. Our technique is based on the focusing of mechanical waves in a flexural plate using a sparse set of actuators. At tactile frequencies, wave diffraction prevents the formation of localized virtual tactile pixels at spatial scales relevant for multi-digit touch interactions. We overcome this limitation by augmenting the plate with a lattice of mechanical resonators, forming a locally resonant metamaterial plate. Coupling between the plate's dynamic modes and those of the resonators alters the dispersion relation governing wave transmission, introducing a slow-wave branch that enables focusing beyond the diffraction limit imposed by the unmodified plate. We use numerical simulations to engineer the dispersion relation of the metamaterial system for high-resolution focusing at tactile frequencies. We then fabricate a metamaterial tactile display and experimentally demonstrate virtual pixels that are far more localized than those generated on an otherwise identical plate without resonators, resulting in a tenfold reduction in virtual-pixel area. In behavioral experiments, we show that this system can deliver perceptually localized single- and multi-point tactile feedback and moving tactile sources while maintaining independent control over temporal waveforms at multiple display locations. The methods reported here can enable high-resolution haptic displays for widespread applications using a small number of actuated degrees of freedom.

Vision-based tactile sensors (VBTS) recover high-resolution contact geometry but typically rely on opaque elastomer layers that prevent visual transparency, while RGB-D cameras provide global depth perception yet degrade significantly at close range. To address this limitation, we present TransTac, a transparent ultraviolet (UV)-encoded binocular VBTS that integrates visual observation and marker-based tactile reconstruction within a single compact device. The system employs a transparent elastomer embedded with UV-reflective markers and a prior-guided Delaunay stereo matching algorithm for robust sparse triangulation. To reliably detect densely distributed semitransparent markers, we develop a lightweight detector that enables stable localization under contact and deformation. The proposed prior-guided Delaunay matching improves correspondence robustness by approximately 21% compared with global assignment baselines while maintaining high reconstruction accuracy. In semantic evaluation, TransTac achieves up to 83.3% zero-shot recognition accuracy on tactile images, exceeding opaque tactile baselines by approximately 50 percentage points. Embedding analysis further reveals substantially stronger cross-modal alignment with natural images, with class-center similarity increasing from around 0.2 to over 0.77. Controlled near-distance experiments quantify the degradation of RGB-D depth reliability and demonstrate extended geometric coverage enabled by visuo-tactile integration. Finally, a compact prototype is implemented with an approximate hardware cost of $70.

Soft robotics is increasingly explored in artistic contexts, where tactile interaction provides audiences with embodied engagement beyond visual or auditory signals. This work presents an interactive installation that maps semantic emotion analysis of narrative text into variable stiffness of soft pneumatic modules. A natural language model identifies two dominant emotions from a predefined set of six, driving the inflation of seven hexagonally arranged soft actuators. The central actuator represents the primary emotion, while the surrounding ones express the secondary. We develop and mechanically characterize silicone actuators, called soft modules, featuring a thin membrane layer, demonstrating how this morphological control expands the achievable stiffness range while preserving simplicity and low-cost fabrication. A user study with ten participants further evaluates how multisensory coupling of stiffness and LEDs intensity influences emotional perception. The results suggest that stiffness modulation accompanied by color change can support emotionally meaningful and engaging tactile interaction in soft robotic installations.

Human tactile perception of materials relies on complex multisensory touch cues, yet the relationship between low-level tactile signals and perceptual representations remains poorly understood. This knowledge gap hinders the integration of touch in digital environments and the development of robots capable of human-like tactile perception. Here, we present an interpretable computational framework for modeling human material perception and recognition using multisensory touch data. Our framework comprises three interconnected models: Model 1 maps finger-surface interaction features to psychophysical sensory attributes, Model 2 classifies materials based on these perceptual representations, and Model 3 directly classifies materials from tactile features. The results showed that combining information from pressing, static contact, and sliding interactions improves prediction accuracy, and that thermal cues are particularly informative for both perceptual modeling and material classification. These findings highlight the importance of thermal and compliance cues, which remain underrepresented in current robotic fingers and haptic displays. Incorporating such cues may enhance artificial systems' ability to approximate human material perception and guide the design of more perceptually grounded haptic interfaces.

While rule-based reinforcement learning has recently catalyzed explicit reasoning in multimodal models, tactile reasoning remains largely underexplored. Existing tactile-language models primarily rely on supervised or contrastive objectives, which limits their capacity to ground predictions in physical evidence or rectify misleading visual priors. Tactile reasoning introduces two modality-specific challenges: the ordinal nature of physical attributes (e.g., hardness, roughness) and the cross-sensor distribution shifts inherent in optical tactile hardware. In this work, we introduce TouchReason-1M, a large-scale multimodal dataset comprising over 1M synchronized tactile pairs across four distinct sensors, and TouchReason-Bench, a rigorous framework for evaluating tactile perception and visual-tactile conflict resolution. Building upon these, we propose Touch-R1, a tactile reasoning MLLM based on Qwen2.5-VL-7B. Touch-R1 is trained via a tactile-grounded GRPO objective that combines ordinal-aware accuracy, cross-sensor physical consistency, structured-format control, and an input-side tactile grounding objective. Specifically, the tactile-use reward assigns credit only when authentic tactile inputs yield superior correctness relative to counterfactual controls where the tactile stream is removed, shuffled, or noise-masked. On TouchReason-Bench, Touch-R1-7B outperforms Octopi-13B by 18.4% and GPT-4o by 24.7% on average. Its structured reasoning traces reveal emergent behaviors of probing, comparison, and revision, demonstrating that R1-style reasoning can be effectively grounded in physical contact.

Tactile-based reinforcement learning (RL) is currently hindered by fragmented research and a focus on over-saturated orientation tasks. We introduce v2 of the Robot Tactile Olympiad (\texttt{roto 2.0}), a GPU-parallelised benchmark designed to standardise tactile-based RL across four distinct robotic morphologies (16-DOF to 24-DOF). Unlike prior benchmarks, roto focuses on end-to-end "blind" manipulation, utilising only proprioception and tactile sensing without state information or distillation. We demonstrate a significant performance leap, with our blind agents achieving 13 Baoding ball rotations in 10 seconds, an order of magnitude faster than current state-of-the-art speeds. By open-sourcing our environments and robustly tuned baselines, we reduce the barrier to entry and enable researchers to prioritise fundamental algorithmic challenges over tedious RL tuning. Website: https://elle-miller.github.io/roto/

Robotic in-hand manipulation requires reliable object-motion tracking under frequent visual occlusion, yet low-texture visuotactile images provide few stable correspondences for conventional image- or geometry-matching methods. This paper presents TacSE3, a tactile motion-estimation pipeline that converts low-texture visuotactile observations into a decoupled three-dimensional force field and estimates incremental rigid-body motion on SE(3). The method derives planar translation from contact-centroid motion and estimates rotation primarily from shear-related tactile responses, yielding a physically interpretable signal for in-gripper tracking and compensation. Experiments with paired DM-Tac fingertip sensors show that dual-sensor sensing reduces translation-rotation ambiguity, supports rotation tracking across axes and object geometries, and provides a lightweight compensation signal that improves disturbance tolerance in downstream manipulation tasks without retraining the base policy.

Tactile sensing is a fundamental modality for embodied intelligence, offering unique and direct feedback on contact geometry, material properties, and interaction dynamics that remote sensors cannot replace. However, unimodal tactile perception is inherently limited by its sparse spatial coverage and lack of global semantic context. With the recent explosion in deep learning and large language models, integrating tactile with vision and language has become essential to bridge physical interaction with semantic reasoning, leading to the emergence of Multimodal Tactile Fusion. Despite rapid progress, the existing researches remain fragmented across disparate datasets, sensing modalities, and tasks, lacking a unified theoretical framework. To address this gap, this paper provides a comprehensive survey of multimodal tactile fusion research up to the first quarter of 2026. We propose a hierarchical taxonomy that organizes the field into two primary dimensions: multimodal datasets and multimodal methods. On the data side, we categorize resources ranging from Tactile-Vision datasets, Tactile-Language datasets, Tactile-Vision-Language datasets, and Tactile-Vision-Other datasets. On the method side, we structure prior work into three core pillars: (1) Multimodal Perception and Recognition, which focuses on object understanding and grasp prediction; (2) Cross-Modal Generation, focusing on bidirectional translation between tactile, vision, and text; and (3) Multimodal Interaction, emphasizing feedback control and language-guided manipulation. Furthermore, we summarize representative tactile sensing hardware, review commonly used evaluation metrics and benchmark settings, and discuss current challenges and promising future directions.

Observing touch on another's body can elicit corresponding tactile sensations in the observer, a phenomenon termed mirror touch that supports empathy and social perception. This visuo-tactile resonance is thought to rely on structural correspondence between visual and somatosensory cortices, yet robotic systems lack computational frameworks that instantiate this principle. Here we demonstrate that cortical correspondence can be operationalized to endow robots with mirror touch. We introduce Mirror Touch Net, which imposes semantic, distributional and geometric alignment between visual and tactile representations through multi-level constraints, enabling prediction of millimetre-scale tactile signals across 1,140 taxels on a robotic hand from RGB images. Manifold analysis reveals that these constraints reshape visual representations into geometry consistent with the tactile manifold, reducing the complexity of cross-modal mapping. Extending this alignment framework to cross-domain observations of human hands enables tactile prediction and reflexive responses to observed human touch. Our results link a neural principle of visuo-tactile resonance to robotic perception, providing an explainable route towards anticipatory touch and empathic human-robot interaction. Code is available at https://github.com/fun0515/Mirror-Touch-Net.

Egocentric human video data, which captures rich human-environment interactions and can be collected at scale, has become a key driver of embodied intelligence research. However, existing egocentric datasets typically lack tactile sensing, a critical modality that provides direct cues about contact, force, and pressure in human-object interaction. Without such signals, models struggle to learn physically grounded representations of real-world interaction dynamics. While tactile sensors provide these cues, deploying high-quality tactile hardware at scale remains expensive and cumbersome. This raises a central question: can tactile feedback be inferred directly from visual observations, enabling scalable tactile supervision for egocentric video data and supporting physically grounded embodied learning? To enable research in this direction, we introduce EgoTouch, a large-scale multi-view egocentric dataset with dense tactile supervision for bimanual hand-object interaction. EgoTouch comprises 208 manipulation tasks spanning 1,891 episodes in diverse indoor and outdoor environments, with synchronized multi-view RGB (head-mounted egocentric and dual wrist-mounted cameras), bimanual 3D hand pose, and continuous pressure maps from wearable tactile sensors. Building on EgoTouch, we introduce TouchAnything, a baseline multi-view vision-to-touch prediction framework that uses the egocentric view as the primary input and flexibly leverages available wrist-mounted views at inference time. Experiments show that incorporating wrist-mounted views generally improves tactile prediction over egocentric-only input, achieving up to 5.0% relative improvement in Contact IoU and 6.1% relative improvement in Volumetric IoU. We will publicly release the dataset, code, and benchmark.

Tactile perception is key to dexterous manipulation, yet simulating high-resolution elastomer deformation remains computationally prohibitive. Finite element methods (FEM) deliver high fidelity but demand costly remeshing, while Material Point Methods (MPM) suffer from heavy particle-memory tradeoffs. We propose a {reduced-order neural simulation framework} that couples coarse-grained MPM dynamics with an implicit neural decoder to reconstruct sub-particle tactile details from compact latent states. The framework learns a continuous deformation manifold from paired high- and low-resolution simulations, enabling physically consistent, differentiable inference. Compared to the TacIPC, our method achieves over 65% faster simulation and {40% lower memory usage}, while maintaining better geometric fidelity. In tactile rendering and 3D surface reconstruction, our methods further improve accuracy by 25% and produce realistic depth images and surface mesh within a faster inference speed. These results demonstrate that the proposed reduced-order neural model enables high-detail, physically grounded tactile simulation with substantial efficiency gains for robotic interaction and optimization.

We present FlexiTac, a low-cost, open-source, and scalable piezoresistive tactile sensing solution designed for robotic end-effectors. FlexiTac is a practical "plug-in" module consisting of (i) thin, flexible tactile sensor pads that provide dense tactile signals and (ii) a compact multi-channel readout board that streams synchronized measurements for real-time control and large-scale data collection. FlexiTac pads adopt a sealed three-layer laminate stack (FPC-Velostat-FPC) with electrode patterns directly integrated into flexible printed circuits, substantially improving fabrication throughput and repeatability while maintaining mechanical compliance for deployment on both rigid and soft grippers. The readout electronics use widely available, low-cost components and stream tactile signals to a host computer at 100 Hz via serial communication. Across multiple configurations, including fingertip pads and larger tactile mats, FlexiTac can be mounted on diverse platforms without major mechanical redesign. We further show that FlexiTac supports modern tactile learning pipelines, including 3D visuo-tactile fusion for contact-aware decision making, cross-embodiment skill transfer, and real-to-sim-to-real fine-tuning with GPU-parallel tactile simulation. Our project page is available at https://flexitac.github.io/.

Quadrupedal loco-manipulation is commonly built on visual perception and proprioception. Yet reliable contact-rich manipulation remains difficult: vision and proprioception alone cannot resolve uncertain, evolving interactions with the environment. Tactile sensing offers direct contact observability, but scalable tactile-aware learning framework for quadrupedal loco-manipulation is still underexplored. In this paper, we present a tactile-aware loco-manipulation policy learning pipeline with a hierarchical structure. Our approach has two key components. First, we leverage real-world human demonstrations to train a tactile-conditioned visuotactile high-level policy. This policy predicts not only end-effector trajectories for manipulation, but also the evolving tactile interaction cues that characterize how contact should develop over time. Second, we perform large-scale reinforcement learning in simulation to learn a tactile-aware whole-body control policy that tracks diverse commanded trajectories and tactile interaction cues, and transfers zero-shot to the real world. Together, these components enable coordinated locomotion and manipulation under contact-rich scenarios. We evaluate the system on real-world contact-rich tasks, including in-hand reorientation with insertion, valve tightening, and delicate object manipulation. Compared to vision-only and visuotactile baselines, our method improves performance by 28.54% on average across these tasks.

3D-printed artificial skins are a scalable approach to whole-body tactile and proximity coverage, but prior implementations have been limited to unimodal sensing and rigid materials. To improve the practical usability of 3D-printed artificial skins, we present a hybrid time-of-flight (ToF) and self-capacitance (SC) sensing skin that demonstrates multi-modal sensing integration, soft compliant coverings for impact absorption and pressure sensing, and a streamlined electrical interface between printed conductive traces and external electronics. We show that combining ToF and SC modalities enables contact detection, scene reconstruction, and pressure-correlated tactile responses with the compliant covering by deploying six artificial skin units with 40 sensing elements over an FR3 robot arm.

Collision-free motion is often aided by tactile and proximity sensors distributed on the body of the robot due to their resistance to occlusion as opposed to external cameras. However, how to shape the sensor's properties, such as sensing coverage; type; and range, to enable avoidant behavior remains unclear. In this work, we present a reinforcement learning framework for whole-body collision avoidance on a humanoid H1-2 robot and use it to characterize how sensor properties shape learned avoidance behavior. Using dodgeball as a benchmark task, we ablate the properties of sensors distributed across the upper body of the robot and find that raw proximity measurements can substitute for explicit object localization provided the sensing range is sufficient and that sparse non-directional proximity signals outpace dense directional alternatives in sample efficiency.

Dexterous robotic manipulation requires perception that remains informative from pre-contact approach to contact initiation and post-contact control. We introduce FingerEye, a sensing and learning framework that strengthens robotic dexterity through continuous vision-tactile feedback throughout interaction. On the sensing side, FingerEye integrates binocular RGB cameras with a compliant contact interface to support perception both before and after contact. Before contact, the fingertip cameras provide close-range visual cues and implicit stereo for precise approach and object localization. After contact, marker-tracked deformation of the compliant ring provides a proxy for contact wrench sensing. On the learning side, we build real-and-sim infrastructure for data collection and evaluation, systematically study policy-interface designs for learning with multiple FingerEye sensors, and develop FingerEye Policy, which applies group-structured modality fusion to reduce modality shortcuts and better exploit distributed fingertip feedback. Across seven contact-sensitive task settings, FingerEye improves wrist-only policy by over 30 percentage points in mean success rate in both simulation and the real world.

Embodied intelligence has advanced rapidly in recent years; however, bimanual manipulation-especially in contact-rich tasks remains challenging. This is largely due to the lack of datasets with rich physical interaction signals, systematic task organization, and sufficient scale. To address these limitations, we introduce the VTOUCH dataset. It leverages vision based tactile sensing to provide high-fidelity physical interaction signals, adopts a matrix-style task design to enable systematic learning, and employs automated data collection pipelines covering real-world, demand-driven scenarios to ensure scalability. To further validate the effectiveness of the dataset, we conduct extensive quantitative experiments on cross-modal retrieval as well as real-robot evaluation. Finally, we demonstrate real-world performance through generalizable inference across multiple robots, policies, and tasks.

Tactile graphics require careful expert validation before reaching blind and visually impaired (BVI) learners, yet existing datasets provide only coarse holistic quality ratings that offer no actionable repair signal. We present TactileEval, a three-stage pipeline that takes a first step toward automating this process. Drawing on expert free-text comments from the TactileNet dataset, we establish a five-category quality taxonomy; encompassing view angle, part completeness, background clutter, texture separation, and line quality aligned with BANA standards. We subsequently gathered 14,095 structured annotations via Amazon Mechanical Turk, spanning 66 object classes organized into six distinct families. A reproducible ViT-L/14 feature probe trained on this data achieves 85.70% overall test accuracy across 30 different tasks, with consistent difficulty ordering suggesting the taxonomy suggesting the taxonomy captures meaningful perceptual structure. Building on these evaluations, we present a ViT-guided automated editing pipeline that routes classifier scores through family-specific prompt templates to produce targeted corrections via gpt-image-1 image editing. Code, data, and models are available at https://TactileEval.github.io/

Physical neural networks offer a transformative route to edge intelligence, providing superior inference speed and energy efficiency compared to conventional digital architectures. However, realizing scalable, end-to-end, fully analog recurrent neural networks for temporal information processing remains challenging due to the difficulty of faithfully mapping trained network models onto physical hardware. Here we present a fully analog resonant recurrent neural network (R$^2$NN) implemented via a metacircuit architecture composed of coupled electrical local resonators. A reformulated mechanical-electrical analogy establishes a direct mapping between the R$^2$NN model and metacircuit elements, enabling accurate physical implementation of trained neural network parameters. By integrating jointly trainable global resistive coupling and local resonances, which generate effective frequency-dependent negative resistances, the architecture shapes an impedance landscape that steers currents along frequency-selective pathways. This mechanism enables direct extraction of discriminative spectral features, facilitating real-time temporal classification of raw analog inputs while bypassing analog-to-digital conversion. We demonstrate the cross-domain versatility of this framework using integrated hardware for tactile perception, speech recognition, and condition monitoring. This work establishes a scalable, fully analog paradigm for intelligent temporal processing and paves the way for low-latency, resource-efficient physical neural hardware for edge intelligence.

Tactile memory, the ability to store and retrieve touch-based experience, is critical for contact-rich tasks such as key insertion under uncertainty. To replicate this capability, we introduce Tactile Memory with Soft Robot (TaMeSo-bot), a system that integrates a soft wrist with tactile retrieval-based control to enable safe and robust manipulation. The soft wrist allows safe contact exploration during data collection, while tactile memory reuses past demonstrations via retrieval for flexible adaptation to unseen scenarios. The core of this system is the Masked Tactile Trajectory Transformer (MAT$^\text{3}$), which jointly models spatiotemporal interactions between robot actions, distributed tactile cues, force-torque measurements, and proprioceptive signals. Through masked token prediction, MAT$^\text{3}$ learns rich spatiotemporal representations by inferring missing sensory information from context, autonomously extracting task-relevant features without explicit subtask segmentation. We validate our approach on peg-in-hole tasks with diverse pegs and conditions in real-robot experiments. Our extensive evaluation demonstrates that MAT$^\text{3}$ achieves higher success rates than the baselines over all conditions and shows remarkable capability to adapt to unseen pegs and conditions.

Object compliance perception enables the identification of soft materials, supporting tasks such as fruit detection and assisted medical palpation. Compliance perception requires sensing an object's deformation and contact forces. Existing vision-based tactile sensing for compliance perception usually depends only on force or deformation. However, deformation-based approaches cannot reliably quantify object compliance, while force-based methods are overly sensitive to geometric variations. To address these limitations, this paper presents a framework that fuses temporal force sequences and deformation field information. Specifically, time-varying contact forces are inferred from tactile image sequences via a neural network, while deformation characteristics are encoded using depth maps. Crucially, the temporal force sequence is used as a dynamic force-response feature for compliance recognition. In standard experiments, the force prediction error reaches 0.06 N within a measurement range of 12 N. The proposed method achieves a 98.0% Shore-hardness classification accuracy for samples ranging from 10 HA to 80 HA. In practical scenarios, including abnormal fruit detection and soft matter, the overall accuracy exceeds 98.5%. This method improves the compliance perception ability of artificial tactile systems and facilitates their deployment in embodied perception applications.

This study proposes a transferable encoding strategy that maps tactile sensor data to electrical stimulation patterns, enabling neural organoids to perform an open-loop artificial tactile Braille classification task. Human forebrain organoids cultured on a low-density microelectrode array (MEA) are systematically stimulated to characterize the relationship between electrical stimulation parameters (number of pulse, phase amplitude, phase duration, and trigger delay) and organoid responses, measured as spike activity and spatial displacement of the center of activity. Implemented on event-based tactile inputs recorded from the Evetac sensor, our system achieved an average Braille letter classification accuracy of 61% with a single organoid, which increased significantly to 83% when responses from a three-organoid ensemble were combined. Additionally, the multi-organoid configuration demonstrated enhanced robustness against various types of artificially introduced noise. This research demonstrates the potential of organoids as low-power, adaptive bio-hybrid computational elements and provides a foundational encoding framework for future scalable bio-hybrid computing architectures.