Whole-Body Control

Humanoid loco-manipulation of large, heavy objects demands forceful interaction across the entire body. However, such payloads shift a humanoid's center of mass and impose sustained loads across the upper body, challenging balance and command tracking. We present HULK, a whole-body control framework for forceful loco-manipulation. Using model predictive control (MPC) to guide reinforcement learning with predictions of the loaded dynamics, we train two teachers: one tracks arm motions under wrist forces, and the other locomotes while holding large objects against the body. A capture-point control barrier function augments the wrist-force teacher during training to improve balance under load. We distill both teachers into a single policy. Evaluation spans simulation and the Unitree G1. In simulation, the teacher with the barrier function achieves the lowest forward and lateral velocity tracking errors at 10 kg per arm among evaluated controllers and reduces aggregate divergent component of motion (DCM) excursion magnitude by 35.7% relative to MPC-guided reinforcement learning alone. Our wrist-force teacher withstands torso push disturbances of up to 130 N.

Autonomous robots can increase uptime and reduce human exposure in Big Science facilities, but strong magnetic fields needed for their operation corrupt sensors and induce pose-dependent mechanical wrenches that destabilize robots and challenge conventional reactive controllers. This paper presents a control framework for modeling, estimating, and dynamically compensating for spatially varying magnetic wrenches acting on legged robots to improve robustness in these fields. We introduce a custom physics plugin for the MuJoCo simulator to model magnetic forces on rigid-body elements, alongside an inverse field-estimation framework to infer the latent magnetic field directly from quadruped dynamic responses and any number of sensor readings. Furthermore, we develop a Magnet-Aware Model Predictive Control (MPC) and Whole-Body Control (WBC) architecture that predicts and counteracts magnetic perturbations during locomotion to increase the range of magnetic fields in which the robot can operate. The effectiveness of the framework is validated through both simulation and physical hardware experiments. We show our method increases the the maximum rejectable disturbances from magnetic field in the force space by a factor of 2.5 and and between 1.6-2 times in torque space compared to a non-compensated system. Within the proposed magnetic field, this constitutes an increase in the area in which the robot can operate by 29,34% of which 10,84% would have previously caused an immediate collapse to non-compensated controllers.

We present a planning and control approach to reactively use hand contacts to stabilize a humanoid in low stability scenarios, where only using feet contacts may result in a fall. Candidate contacts are sampled within the robot's reachable workspace, and a preview is computed by rolling out the centroidal dynamics through pre-impact, impact and post-impact phases. Sampled points are scored based on the Center of Pressure (CoP) control authority at the post-impact phase. Central to our approach is a learned model of the robot's CoP region during post-impact, which enables rapid evaluation of candidate contact points compared to traditional optimization-based methods. The presented planner has two stages: the first selects an optimal bracing region and the second computes an optimal bracing point within the region. Our simulation results demonstrate an average increase in impulse resilience of 89% over recovery without hand contacts and 17% over a naive planning strategy (closest reachable region). We validate our framework on hardware, performing push tests while standing and walking. The standing trials show an average 43% reduction in stabilization time compared to naive hand placement and the walking trials demonstrate a 18% reduction compared to baseline recovery (without hand contacts).

Whole-body teleoperation requires a humanoid robot to reproduce a human operator's behavior even when their terrains differ. This demands that the robot perceive local terrain and adapt its posture and contacts accordingly, rather than copy the operator's motion frame by frame. However, paired motion data linking the same behaviors across flat ground and different terrains remain scarce, limiting supervision for learning terrain-adaptive control. To enable whole-body teleoperation across mismatched terrains, we introduce NEXUS, a perceptive whole-body control framework that combines human motion commands with onboard sensory feedback. We first develop a scalable terrain-aware adaptation algorithm that efficiently generates high-quality motion pairs across motions and terrains without per-motion or per-terrain tuning. Using a paired motion corpus totaling nearly 1,000 hours, we train a perceptive whole-body controller through teacher-student learning to reproduce commanded behaviors across terrains. Experiments demonstrate efficient, scalable generation of high-quality motion data and show that NEXUS combines broad behavioral coverage with terrain adaptability and tracking fidelity, outperforming existing whole-body controllers on the evaluated benchmarks. Zero-shot real-world deployment enables real-time whole-body teleoperation on diverse unseen terrains, further validating the generalization of our method. Project website: https://nexus-humanoid.github.io/

Whole-body compliant control is essential for deploying heavy humanoids under high payload in human-centric environments. Most prior force-aware learning-based pipelines focus on end-effector resistance, per-link upper-body springs, or end-effector stiffness modulation, leaving arbitrary-site perturbations on heavy platforms with lower-body engagement largely unaddressed. We close this gap with CompliantWBC comprising: (1) A base policy trained with RL to maximize compliance-fidelity reward, guided by a multi-site whole-body impedance reference controller, extending classical Cartesian impedance to any controlled link; (2) A bounded residual policy that edits the per-link impedance equilibrium over a frozen base, correcting the coarse but structured wrench estimate supplied by a force encoder co-trained behind a gradient barrier; (3) A Phong-weighted force-origin sampler with an axis-decoupled pelvis anchor induces lower-body-inclusive compliance curriculum training via two interpretable parameters. We evaluate CompliantWBC in simulation against both compliant and stiff baselines, achieving best compliant fidelity of 2.58cm deviation from analytical solutions, and demonstrate it on a real heavy humanoid across static/dynamic force reaction, board wiping, squat under payload, and cooperative payload transport. Project website: https://dotandung.github.io/compliantwbc/

Bipedal loco-manipulation enables robots to interact with objects beyond the nominal workspace of their arms by coordinating locomotion and manipulation. Realizing this capability requires a low-level whole-body controller that translates task-level manipulation goals into coordinated arm and leg motions while maintaining balance. We present a unified whole-body controller trained with reinforcement learning that directly maps 6-DoF end-effector targets to coordinated actions for the bipedal base and robotic arm. Given only an end-effector target, the learned controller autonomously coordinates reaching, postural adaptation, and stepping without explicit base-velocity or footstep commands. A reward-gating strategy regulates the trade-offs among end-effector tracking, locomotion, and balance during training, while a temporal context estimator combines windowed Transformer encoding, recurrent GRU memory, and auxiliary dynamics prediction to extract dynamics-relevant information from observation history. Real-robot experiments demonstrate that the same controller supports reaching, postural adaptation, and stepping under commands from VR teleoperation, a learned diffusion policy, and scripted trajectories, providing a common end-effector interface for diverse manipulation tasks.

Whole-body humanoid teleoperation commonly combines a motion-tracking policy with a separate dexterous-hand retargeter. However, independently generated commands do not explicitly preserve body-hand geometric relations, leading to mismatches in relative wrist poses and fingertip positions during bimanual interaction. We present a gated residual coordination framework that keeps both modules frozen and applies bounded corrections to their outputs. A motion-conditioned action gate allocates correction authority across joint groups, while reference-geometry-dependent reward gates emphasize relevant interaction objectives during training. To establish the nominal body controller on Agile One, we introduce multi-pose morphology calibration that jointly estimates triaxial scales and effector-local offsets, together with staged motion dataset curation for training a SONIC-based tracker. The residual policy uses human motion references, initial commands, and robot proprioception without explicit object or contact observations. In simulation, it reduces wrist and fingertip geometry errors by 39.2-56.3% over direct composition on held-out GRAB motions, while preserving whole-body tracking on AMASS, with success rates of 89.03% without residual coordination and 89.29% with it. Ablations characterize the contributions of reward gating, adaptive correction authority, and separate body and hand correction heads.

This work investigates the control strategies of complex whole-body robot teleoperation that coordinate active perception, bimanual manipulation, and navigation. We developed a hybrid control framework, combining the free-form and constrained control, for the whole-body teleoperation of the TIAGo mobile manipulator. We conducted a user study to explore people's control strategies under different task constraints such as limited time and low tolerance of errors. Our results highlight the effective use of coordinated control in improving task efficiency and reducing the risk of reaching individual joint limits. We discuss our results and their implications for designing future whole-body robot teleoperation systems.

Contact-rich loco-manipulation requires a bridge between semantic action generation and physical interaction control. Existing Vision-language-action (VLA) models generate task-level actions from visual and linguistic observations, but cannot interpret the physical interactions induced by those actions. While the whole-body control (WBC) policy can stabilize the robot, it cannot distinguish task-relevant interaction forces from forces induced by external disturbances during manipulation. Although force/torque sensors provide direct measurements of physical interactions, retrofitting them entails additional hardware costs and substantial integration effort, particularly for platforms not designed with sensor integration in mind. To address this problem, we propose FWBC-VLA, a force-aware framework that bridges task-level VLA action generation and low-level whole-body compensation control for wheeled-legged robots. First, we introduce HSR-Force, a sensorless residual-torque estimator for inferring contact strength and its temporal variation. These contact estimates are then encoded as tokens and injected into the VLA action expert during action decoding, enabling the policy to perceive contact onset, sustained loading, and release. For loco-manipulation tasks, all parameters of the pretrained VLA backbone are fine-tuned on our WL&Arm Dataset, which comprises more than 5,000 episodes. Moreover, the robot's proprioceptive state, the Jacobian-derived body-frame force estimate, and the estimated contact state are jointly fed into a compensation generator to produce corrective actions. The manipulation-centric actions are subsequently combined with the corrective actions and passed to the WBC policy for execution. Real-world experiments on whiteboard wiping and door opening with a door closer demonstrate the effectiveness of our FWBC-VLA in contact-rich loco-manipulation.

General-purpose motion trackers enable humanoid robots to follow diverse whole-body motions while maintaining balance, but are trained only on flat ground, failing to exploit bipedal mobility over complex terrain. Cross-terrain controllers, meanwhile, are task-specific or accept only low-dimensional locomotion commands. We introduce InterTrack, the first behavior world model (BWM) for robust whole-body tracking with environment interaction. Its Transformer jointly predicts the next action, state, and behavior distribution, learning environment-conditioned dynamics. To scale interaction training data, an automatic annotation pipeline reconstructs 3D support geometry from retargeted motions. At deployment, the policy handles commands implausible in the current environment in a "best-effort" manner. Quantitatively, InterTrack achieves an 81.3% success rate on terrain interaction (4.3 times the best evaluated baseline) and a 99.3% fall-recovery rate, while also improving free-space tracking and outperforming three leading tracking baselines across all of these regimes. To our knowledge, we provide the first demonstration of real-time cross-terrain whole-body teleoperation on a humanoid robot, alongside object interaction, stable responses to missing supports, and robust recovery from falls.

The demand for humanoid loco-manipulation tasks with an object has recently increased, and most existing control approaches for stability in such tasks rely on heuristics or machine-learning techniques. This study rigorously analyzes and exploits the dynamic effects of the object mass on balance stability. By formulating the object mass parameters in the whole-body dynamics with distributed contact wrenches and centers of pressure at the stance contacts, their nonlinear effects on the system momenta and constraints are quantified. The dynamic models and constraints are incorporated into the construction of the balanced state basin/boundary (BSB), a partition of the center-of-mass state space for a biped system to maintain balance in its desired contacts. The implications of the BSB for prediction and control are highlighted using a humanoid robot and an analytically tractable reduced-order mechanism. The BSBs under different conditions of base of support, actuation capacity, and pose provide systematic analyses of the effects of object mass on the balancing capability of a system. In particular, the trade-off relationships between momentum regulation and limiting factors in balancing are characterized, introducing two key quantities of the object: the critical mass, at which the system's balancing capability is maximum, and the transition mass, which activates different limiting factors. In addition, sufficient conditions for imposing balanced states on a trajectory are established and implemented with BSBs as explicit threshold constraints in the whole-body trajectory optimization for stable object-lifting control of the humanoid, demonstrating the lift-and-hold and lift-and-release tasks with distinct mass properties in simulations and experiments.

Learning-based approaches to locomotion have risen in popularity in recent years, showing the capability for complex legged locomotion and whole-body control. Reinforcement learning (RL), the primary learning-based approach for locomotion, often utilizes a high-performance simulation tool, providing a controlled and efficient training and development environment. However, policies that perform well in simulation frequently encounter unexpected challenges when deployed on a physical system, known as the sim-to-real gap. This work presents a robust RL locomotion framework capable of whole-body control. The proposed RL framework utilizes Nvidia's new set of simulation tools, Isaac Sim, and its companion RL framework, Isaac Lab, for training, achieving a zero-shot sim-to-real policy. The performance of our policy is validated on physical hardware using the Unitree Go1, with experimental results showing similar velocity tracking performance to the quadruped's integrated controller, with a greater ability to recover from large disturbances, and achieve linear velocities of 2.0 m/s and angular velocities of 1.8 rad/s.

Whole-body teleoperation requires users to coordinate perception, manipulation, posture, and mobility across multiple robot components. This coordination is difficult because users must simultaneously control the robot's head, arms, torso, and base while maintaining task awareness and avoiding kinematic or environmental constraints. In this paper, we propose coupled egocentric control, a body-following teleoperation approach in which the robot's torso and base automatically respond to the operator's head and arm motions. Rather than requiring explicit touchpad commands for every torso or base adjustment, the system lets users focus on gaze and hand control: head pitch adjusts torso height, head yaw drives base rotation, end-effector height adjusts torso motion, and end-effector workspace boundaries trigger base translation. We evaluate this approach in a user study on whole-body teleoperation of a TIAGo mobile manipulator for home-care-inspired tasks. Compared with a baseline hybrid interface, coupled egocentric control improves object manipulation efficiency, reduces button-based control effort and arm singularities, lowers mental demand and overall workload, and increases ease of use, ease of learning, confidence, and user preference for torso and base control.

Loco-manipulation has recently shown promising capabilities; however, achieving high-precision control, managing the high-dimensional action space induced by many degrees of freedom (DoFs), and fully exploiting the inherent redundancy of whole-body systems remain challenging. In this paper, we propose a novel whole-body control framework that effectively addresses these challenges by decomposing the complex loco-manipulation problem into partial reference motion generation and low-level imitation control. We introduce a new Kinematic Normalizing Flow (KNF) model, trained on a large-scale kinematic dataset, that generates diverse yet feasible partial reference motions. A high-level controller is then trained to navigate the KNF's latent space to exploit redundant solutions, while a low-level controller ensures physically feasible and accurate motion execution. We validate our approach on the quadrupedal robot equipped with a six-DoF robotic arm. In simulation, experimental results show that our approach significantly outperforms state-of-the-art methods in terms of tracking accuracy and feasible workspace coverage. For hardware deployment, we evaluate the system over 24 episodes across 8 different mobile loco-manipulation tasks. The system achieves end-effector pose-tracking errors of 4.5 cm and 0.14 rad, while maintaining accurate locomotion tracking with linear and angular velocity errors of 0.1 m/s and 0.01 rad/s, respectively, outperforming competitive baselines. Our method represents a practical and powerful solution for accurate and generalized whole-body loco-manipulation in high-DoF robotic systems, with promising potential for diverse downstream robotic tasks.

Dynamic loco-manipulation requires legged robots to coordinate whole-body motion while maintaining stable physical interaction with grasped objects under uncertain external forces. While tactile sensing has been widely studied for robotic manipulation, its role in dynamic whole-body control remains largely unexplored. Existing works without tactile feedback commonly grasp firmly rather than regulate the grasp according to the interaction. We propose TAC-LOCO, a tactile-augmented unified reinforcement learning framework that encodes tactile array observations from compliant grippers into a compact latent representation and joins it with proprioception for unified control of the legs, arm, and gripper. With effective grasp stability reward design, the policy learns to simultaneously track body velocity and end-effector trajectories, moderate grasp force, and prevent object slip under both gradual load changes and sudden release events. We deploy the policy zero-shot on a Unitree Go2 with an Interbotix WidowX 250 arm and tactile gripper, demonstrating dynamic tactile-informed loco-manipulation under varying external interactions, achieving a 47% reduction in grasping force and an object drop rate of less than 1%.

Retargeting human object interaction demonstrations to physics based simulation requires reproducing not only body motion but also the object motion and contacts that make manipulation succeed. However, position only hand trajectories do not specify the contact forces needed to manipulate objects, and directly tracking them can overconstrain contact rich finger behavior. We introduce WristMimic, a wrist guided whole body control framework that explicitly separates contact free body motion from contact rich hand manipulation. The contact free body and wrist are guided by kinematic pose targets, whereas the fingers are not directly supervised by human hand pose. Instead, they learn grasping and manipulation behaviors from object tracking and contact outcomes. Our key insight is that the wrist is the natural gate between these two regimes. It is largely free from contact and can be tracked kinematically, yet it determines the global hand configuration and places the fingers within reachable grasp affordances. To ensure reliable wrist placement during interaction, we introduce wrist specific reset constraints and reward prioritization. Experiments show that WristMimic matches or surpasses methods using full finger pose supervision while enabling finger agnostic retargeting across diverse hand embodiments.

Large-scale humanoid motion-tracking controllers are commonly improved by reallocating training effort: difficult motions are sampled more often, isolated into smaller subsets, or assigned to specialized experts. We show that this view is incomplete. In strong whole-body-control baselines, a residual set of feasible training clips remains unsolved even under targeted training, especially for high-dynamic transitions and balance-critical motions. These failures arise not only from insufficient exposure, but from a mismatch between the motion demands and the effective capability induced by the default training recipe. We propose Athena-WBC, a compact teacher-student pipeline with capability-aligned policy experts for long-tail humanoid whole-body control. Dynamic experts use a tracking-focused, constraint-aware objective that removes conservative effort and temporal-control penalties while preserving physical feasibility constraints; balance experts use a gravity curriculum to improve early-training survivability. The resulting privileged teachers are motion-routed for DAgger distillation and then compressed into a single controller with deployable observations followed by RL fine-tuning. Experiments on a full-size humanoid show improved recovery of training-set long-tail motions and better held-out tracking than a strong SONIC-recipe baseline, using only a small number of experts.

We present AnyBody, a unified whole-body humanoid controller driven by an arbitrary subset of body keypoints chosen at deploy time. Prior physics-based trackers either rely on expensive full-body motion capture and error-prone trajectory retargeting, which bottleneck scalable data collection and policy learning, or decompose upper- and lower-body control into separate hierarchical representations, sacrificing the coordinated whole-body motions that loco-manipulation requires. We close this gap by learning a single latent motion representation that any keypoint subset can address. To achieve this, we first train a privileged teacher tracker on a large unstructured motion corpus and distill it online into a deterministic encoder-decoder student whose latent space is a unit sphere. We then train a transformer keypoint encoder that admits any subset of body keypoints through masked self-attention, aligning it to the privileged latent. Additionally, we treat the frozen decoder as a motor prior and specialize downstream tasks with a lightweight residual corrector in the latent space. We demonstrate the effectiveness of AnyBody by tracking large-scale human motions from arbitrary keypoint subsets, free-form control, flexibly teleoperating, and learning downstream behaviors including locomotion, in-air writing, and obstacle-reach.

Achieving everyday tasks with humanoid robots requires coordinating stable locomotion with versatile manipulation. However, existing whole-body controllers still face significant challenges. Methods trained solely via command sampling, without motion-capture (MoCap) data, often struggle with sparse rewards and require carefully tuned curricula to converge. This is especially problematic for upper-body control, where the resulting motions deviate from human-like statistics and degrade whole-body coordination. Conversely, approaches that imitate full-body MoCap data suffer from dataset imbalance, as many locomotion trajectories are overly aggressive for stable-locomotion scenarios, necessitating extensive data filtering and augmentation. To address this, we present Composite Whole-Body Imitation (CWI), a framework that decouples the use of MoCap data for upper-body manipulation and lower-body locomotion. This decoupling allows us to exploit the full MoCap dataset of diverse manipulation references, while stable, command-conditioned lower-body locomotion is guided by dual discriminators trained on curated expert-quality walking and squatting clips via an Adversarial Motion Prior (AMP). A multi-critic architecture reduces conflicts among locomotion, manipulation, and motion-style objectives, and a teacher--student distillation stage yields a whole-body policy conditioned only on bimanual hand poses and velocity/height commands. We evaluate CWI through simulation experiments and real-world deployment on a full-size LimX Oli humanoid. The results show competitive loco-manipulation performance, robust whole-body coordination, and practical teleoperation without full-body motion-capture equipment. A project page with supplementary material can be found at https://cwi-ral.github.io/CWI-RAL-Webpage.

Legged manipulators combine the mobility of legged platforms with the manipulation capability of robotic arms. However, arm-induced Center-of-Mass shifts and dynamic disturbances make the system more prone to instability under actuator failures, potentially leading to falls, task failures, or safety risks. Existing fault-tolerant control methods mainly focus on locomotion alone, leaving the coupled problem of whole-body stability and arm reachability in fault-tolerant loco-manipulation largely unaddressed. To bridge this gap, we propose FT-WBC, a fault-tolerant loco-manipulation framework for robust whole-body control of legged manipulators under actuator failures. FT-WBC adopts a decoupled upper- and lower-body policy architecture and introduces two key modules: a Fault Estimator (FE) and a Posture Adaptation Module (PAM). The FE predicts faulty joints from lower-body proprioceptive histories, while the PAM uses this fault information to adapt the base posture plan generated by the arm policy, converting potentially unstable posture requests into safe and executable base posture commands. Through this fault-aware posture adaptation mechanism, FT-WBC synthesizes compensatory gaits under actuator failures and preserves as much arm workspace as possible while maintaining whole-body stability. Simulation and real-world experiments show that FT-WBC significantly improves survival rate and workspace under weakening or locked failures, and transfers zero-shot to a real legged manipulator in the real world.

Safe physical human--robot interaction on floating-base robots requires interaction regulation under changing contact constraints. We develop a contact-consistent normalization in which the residual end-effector channel is represented as a linear double integrator in acceleration coordinates. Both discrete prediction matrices are independent of configuration and support mode; posture and contact enter only through task-inertia force recovery and constraints. The controller combines a constant-Hessian receding-horizon QP, an acceleration-disturbance observer, and a priority-consistent realization. Classical operational-space impedance is shown to be the unconstrained infinite-horizon limit. MuJoCo experiments on a 17-DOF biped and a Menagerie-derived Unitree G1 model evaluate sustained forces, transmitted shocks, and scheduled contact-model changes. The observer sustains near-offset-free tracking across a genuine contact-set switch and a scheduled support-mode transition, while disturbance estimation---not contact consistency alone---is the dominant source of fixed-stance accuracy; covariance inflation gives only scenario-dependent transient benefit.

Whole-body mobile manipulation requires coordinating mobile base and manipulator under shifting viewpoints, posing challenges in geometric perception and action generation. Current policies either rely on 2D features or sparse 3D representations that lack dense spatial structure, and typically encode arm and base within one action vector that ignores their distinct control demands. Moreover, existing dense fusion strategies risk corrupting pretrained representations under noisy depth while incurring heavy computational overhead. We present GeoHAT, an end-to-end diffusion-based framework built on a simple principle: geometry should be injected only where reliable and attended to only where needed. GeoHAT employs a lightweight Fourier spatial encoder that maps dense per-pixel 3D coordinates into geometric tokens without an additional 3D vision backbone. These tokens are then selectively injected into vision foundation model features through per-token gated fusion modulated by depth validity, preserving the semantic prior while enriching spatial understanding. For action generation, a Hybrid Whole-Body Action Decoder decomposes arm and base into distinct subspaces and lets each action modality attend to its task-relevant visual context through sparse cross-attention, while causal temporal modeling captures intra-timestep coordination and inter-timestep dependencies. Experiments on the ManiSkill-HAB simulation benchmark demonstrate that GeoHAT achieves a 79.3% mean success rate, surpassing the strongest baseline by 23.7%. Furthermore, real-world experiments on diverse tasks also confirm consistent improvements over all baselines.

Spiking Neural Networks (SNNs) coupled with neuromorphic hardware offer energy-efficient solutions for humanoid robot control. However, existing SNN-based motor control systems address bipedal locomotion and arm control in isolation, leaving integrated control of both unaddressed. We present a spiking architecture that coordinates force-based arm control and bipedal locomotion in a simulated humanoid, using the Neural Engineering Framework (NEF) and Semantic Pointer Architecture (SPA). High-level action selection between locomotor and arm control is mediated by a biologically grounded spiking basal ganglia model. We validate the system through co-simulation of Nengo, for the neural control, and Isaac Sim, demonstrating successful target reaching, continuous digit drawing, path-following locomotion, and finally, switching between walking and arm control via basal ganglia disinhibition. To our knowledge, this is the first integrated spiking controller to combine bipedal locomotion and arm control on a full-scale humanoid platform. The full spike-based implementation enables future deployment on low-power neuromorphic hardware.

Whole-body teleoperation is essential for scalable robot data collection in loco-manipulation tasks, yet existing approaches relying on exoskeleton suits or multi-camera setups impose prohibitive cost, complexity, and environmental constraints. Recent methods using a single extended reality (XR) device with end-to-end reinforcement learning policies partially address these limitations but require robot-specific retraining, suffer from out-of-distribution failures, and rely on motion retargeting that neglects dynamic feasibility. We propose a hierarchical whole-body teleoperation framework driven by a single XR device that generalizes across diverse robot morphologies without retraining robot-specific policies. A Model Predictive Control (MPC)-based motion retargeter jointly optimizes alignment with the operator's intent and the robot's dynamic feasibility, generating optimal commands for existing low-level controllers. To ensure robust online execution, we introduce a state synchronization method that resets the simulator state at each MPC step to handle noisy real-world measurements and contact sensitivity, and integrate SLAM-based global pose feedback to mitigate long-term drift. Simulation results show higher success rates on whole-body control tasks for both a humanoid (over 30% lower completion time and 20% lower power consumption) and a mobile manipulator (zero collisions) compared to baselines. Real-world experiments further validate the effectiveness and flexibility of our method, demonstrating the successful deployment of the proposed retargeter on both platforms for whole-body control tasks and the ease of allowing users to adjust teleoperation behavior based on their preferences. This plug-and-play framework offers a scalable, morphology-agnostic solution for whole-body robot teleoperation, enabling real-time behavioral customization and broad applicability across platforms.

Humanoid loco-manipulation benefits from one controller to coordinate locomotion, arm movements, and fall recovery. These behaviors are difficult to learn together from scratch because they require different skills and objectives. We present HANDOFF, a training architecture that distills motion-tracking, locomotion, and recovery teachers into one 29-DoF policy, using context-conditioned KL losses over separate action slices and a soft mixture of experts. Commanded velocity continuously blends body supervision, while a binary recovery flag assigns the full action to the recovery teacher. The resulting controller takes a compact 10-D task-space command rather than a dense kinematic stream and does not switch policies at runtime. On the Unitree G1, HANDOFF matches state-of-the-art velocity tracking and obtains the largest robust manipulation workspace in a matched adapted-interface benchmark. The same controller executes natural-language-driven, multi-stage loco-manipulation tasks in simulation and hardware experiments without further data collection or fine-tuning.

Building a general-purpose whole-body controller is essential for enabling diverse motion capabilities in humanoid robots across a wide range of downstream tasks, including locomotion and loco-manipulation. Different tasks rely on distinct motion reference modalities: locomotion primarily depends on coordinated robot joint trajectories, whereas manipulation requires precise end-effector trajectory tracking. Existing methods often overlook the representational mismatch between dense robot joint angles and sparse end-effector poses. To address this, we propose Multi-Modal Mimic (M3imic), a versatile multi-modal whole-body control framework that unifies heterogeneous motion reference modalities, including robot joint angles, human pose trajectories, and end-effector poses, using modality-specific encoders to map them into a shared latent space. Leveraging large-scale reinforcement learning in the simulator, we train a single policy that achieves sim-to-real transfer across multiple motion reference modalities without modality-specific retraining. Extensive simulation and real-world experiments on the Unitree G1 robot are conducted to evaluate the proposed framework. In simulation, the policy achieves a peak success rate of 98.42% on an unseen test dataset, demonstrating its exceptional generalization capability. The code is available at https://github.com/Renforce-Dynamics/MultiModalWBC

The effectiveness of a soft wearable back-support device in enhancing postural stability was investigated under trip-like perturbations using two experimental paradigms: perturbed standing and perturbed walking. Healthy subjects completed trials under three different back-support conditions: no device, device worn with low stiffness, and device activated with high stiffness. Whole-body stability was quantified using the minimum Margin of Stability (MOS) at the point of maximal instability. Results demonstrated increased MOS during device use, indicating enhanced postural stability. In standing, MOS increased significantly with device stiffness, whereas in walking, both device conditions improved MOS relative to no device but did not differ significantly from each other. These findings highlight the potential of soft wearable back-support devices with adjustable stiffness to improve reactive balance control against external perturbations, with important implications for fall prevention. Future research should explore personalized stiffness optimization and evaluate efficacy in populations at elevated risk of falls.

Recent advances in reinforcement learning (RL) have demonstrated impressive whole-body agility for humanoid robots, yet ensuring safety and satisfying constraints -- particularly those specified after training -- remains a challenge. Towards this goal, we present ConstrainedMimic, a control framework that leverages whole-body kinematics and dynamics for real-time constraint enforcement within RL tracking policies. By integrating principles from operational space control and control barrier functions (CBFs), we enable the satisfaction of arbitrary runtime constraints on both the kinematic reference motion and the underlying dynamics. In whole-body motion-tracking and teleoperation experiments on a (simulated) Unitree G1 with a learned policy, we demonstrate collision avoidance (both with the robot body and external obstacles), joint limits, and center of mass stability constraints. By remaining consistent with the current contact mode and tracking objectives, we minimally restrict the capabilities of the policy when constraints are active. Our method is fully differentiable, runs on CPU, GPU, and TPU, and can be deployed at up to 300-500 Hz. All software will be freely available upon publication.

Safety-critical control is essential for humanoid robots operating in complex human-centered environments, where physical safety constraints such as joint limits, self-collision avoidance, obstacle avoidance, and workspace boundaries must be satisfied during real-robot operation. However, existing approaches remain limited because kinematic safety guarantees can be degraded in the presence of unknown disturbances, such as model uncertainties, trajectory-tracking errors, and external perturbations. This paper presents a hierarchical safety-critical whole-body control framework for humanoid robots based on input-to-state safe control barrier functions (ISSf-CBFs). The proposed architecture integrates a kinematic-level whole-body controller (KinWBC), an ISSf-CBF safety filter, and a dynamic-level whole-body controller (DynWBC). KinWBC generates nominal joint-motion references from prioritized tasks; the ISSf-CBF filter minimally modifies these references to satisfy kinematic safety constraints under bounded disturbances; and DynWBC tracks the filtered references while enforcing full-body dynamic feasibility and contact stability. Safety constraints are imposed on a whole-body kinematic model, and the ISSf-CBF parameters are conservatively tuned so that the resulting kinematic safety guarantees can be transferred to full-order humanoid dynamics under unknown disturbances. Simulation and real-robot experiments demonstrate that the proposed framework improves safety margins under model mismatch and reliably enforces multiple safety constraints in real time during locomotion, teleoperation, and single-leg balancing with hand control. Project website: https://kwlee365.github.io/SafeWBC-Website/

Humanoid robots have achieved impressive locomotion performance, yet contact-rich and long-horizon manipulation remains a major bottleneck. Manipulation is inherently contact-rich and demands compliant whole-body control for stable interaction, while its diversity and long-horizon nature favor modular, planner-compatible interfaces over joint-space tracking. We propose CEER, a compliant end-effector-root (EE-root) control abstraction for modular humanoid loco-manipulation within a hierarchical planning framework. CEER enables compliance-aware whole-body control in an interpretable task space defined by root motion commands and end-effector pose targets, and supports plug-and-play integration with heterogeneous high-level planners. A teacher-student framework is adopted to distill a general motion-tracking controller into a low-level policy that consumes only EE-root commands. We further construct a hierarchical system that integrates heterogeneous planners and task modules through the EE-root interface, enabling diverse manipulation tasks without retraining the underlying whole-body policy. Experiments in simulation and on hardware demonstrate 3.3 cm end-effector tracking accuracy with substantially reduced jerk compared to baselines, stable contact-rich manipulation under teleoperation, and up to 70% success in simulated single-object loco-manipulation tasks within a room-scale environment. These results indicate that compliant EE-root control provides a practical abstraction for humanoid loco-manipulation, enabling modular and scalable integration of diverse skills.