Channel

Conventional satellite remote sensing transmission follows a reconstruct-then-infer paradigm that optimizes pixel-level fidelity, creating an objective mismatch with downstream tasks such as classification and detection, especially at low SNR. This paper investigates a task-oriented framework that bypasses image reconstruction and directly transmits semantic features extracted by a multitask-pretrained backbone. A lightweight channel adaptation module (CAM) compresses feature dimensionality for bandwidth reduction, and a feature restorer recovers task-relevant structure after channel corruption. With the backbone frozen, the CAM and task-specific downstream heads are jointly optimized with task and feature-level supervision under random-SNR training. Under the adopted AWGN setting, experiments on scene classification and object detection show consistent gains over reconstruction-oriented JSCC baselines across different SNR conditions, with the largest improvements in the low-SNR regime.

Classical CSI feedback in FDD massive MIMO transmits a compressed reconstruction of the channel, optimizing fidelity to the original signal regardless of the downstream task. We propose a semantic communication perspective: instead of reconstructing the channel, the UE transmits a learned \emph{semantic embedding} optimized end-to-end for beam selection at the gNB. Comparing reconstruction-oriented feedback (CsiNet) against task-aware semantic feedback across two input domains and three observation scenarios, we show that a semantic embedding of just $d=8$ real values from only 43 NR CSI-RS pilots in the angular-delay domain achieves the highest beam prediction accuracy, outperforming every method with access to the full 512-subcarrier channel. The key insight is that beam-relevant information is intrinsically low-dimensional: the semantic encoder learns to discard reconstruction-irrelevant structure and retain only a compact representation that is relevant to beam selection, realizing the core principle of semantic communication: transmit the intent, not the signal.

Text-to-speech that reads raw text has no lexicon: a rare word is read as guessed. Remedies train a reading-and-accent channel on recorded speech or edit words one at a time from exemplars. We do neither. The frozen backbone reads a sentence containing a common word it already says correctly, and its own output then serves as the teacher for the same sentence, with that word replaced by a tagged, accented reading; this training pair is the whole idea. On Sarashina2.2-TTS, screened raters at Fleiss' kappa = 0.85 hear the prescribed accent on 0.89 of unseen words against 0.57 for kana, which cannot express one; kana wins no pair; naturalness is not measurably hurt. Moved untuned to autoregressive, diffusion, and encoder-decoder backbones, it transfers reading, 0.25 to 0.47 above no edit on 319 words, and on CosyVoice 2 accent on two words in three, but not on Irodori; the paper locates why.

Wi-Fi signal data can be used to compromise the privacy of individuals. While many existing approaches rely on Channel State Information (CSI), collecting this data on typical IoT devices often requires elevated operating system permissions and specialized drivers. Consequently, this paper investigates the feasibility of utilizing Received Signal Strength Indicator (RSSI) data to predict human locations. RSSI was selected because it is accessible even on devices with limited user permissions, and therefore is more applicable to a wider array of IoT devices. To bypass the tedious process of obtaining training data needed to train an RSSI-based model, an existing Wi-Fi pose prediction project was used in this research. However, that project assumed CSI data as input. Therefore, we investigate the feasibility of cross-domain inference, i.e., feeding RSSI data into that existing CSI-based model. We collected an RSSI dataset, synchronized with video ground-truth of a person moving within a room, to evaluate the model's performance. This evaluation confirmed that RSSI data can predict locations with approximately 80% confidence when human movement is present. This demonstrates that a model trained on CSI data can be used to evaluate low-granularity RSSI data consisting of decibel-milliwatt (dBm) values to roughly locate people in the collection space. These results imply that a wide range of IoT devices can be used for privacy invasion in Wi-Fi-dense environments.

Channel simulation has recently emerged as a useful component in machine learning systems where samples from a prescribed probability distribution are to be compressed. Yet, general channel simulation algorithms often suffer from high computational costs, random stopping times or, in the worst case, can require generating an infinite number of shared random samples. We introduce a scheme for both exact and approximate simulation of discrete-to-continuous channels which conversely uses a fixed number of random samples, and therefore has a runtime independent of the channel and the input. Unlike existing channel simulation schemes which generate a sequence of independent samples from a proposal distribution, our approach generates one sample, or alternatively a fixed number of samples, from each potential target distribution. We then apply a latent permutation to the samples before performing sample selection using an exponential race. Our scheme provides a flexible tradeoff between the number of generated samples and the compression rate. Using polar and multilevel coding, we scale our approach to handle long blocklengths in $O(n \log n)$ time in order to benefit from reduced per-symbol overhead. We conclude by demonstrating applications to variable-rate compression with stochastic VQ-VAEs and communication-efficient differentially private distributed mean estimation via exact simulation of the Gaussian mechanism.

In sub-terahertz (sub-THz) communications, the coupling of ultra-wide bandwidth and severe phase noise (PN) impairments renders conventional joint channel and PN estimation highly complex and computationally prohibitive. To address this, we propose CRFCAN, a complex-valued residual FFT convolutional attention network designed for joint channel and PN estimation. Unlike existing deep learning schemes that rely on cascaded networks or hybrid frameworks combining neural networks with conventional iterative estimators, CRFCAN performs joint recovery in a truly end-to-end fashion through a physics-inspired cross-domain structure. Specifically, Fast Fourier Transform (FFT) and inverse FFT modules are embedded within residual groups to enable iterative feature interaction across the time and frequency domains, thereby capturing both frequency-selective fading and time-varying phase distortions. In addition, two dedicated residual blocks are introduced for complex feature extraction and multiplicative phase-distortion modeling, respectively. A physics-aware PN output tail with soft normalization is further employed to improve estimation stability while preserving the physical characteristics of the effective PN process. Simulation results demonstrate that CRFCAN significantly outperforms conventional algorithms and state-of-the-art deep learning models in terms of normalized mean square error (NMSE) and bit error rate (BER). Notably, CRFCAN achieves superior performance with single-shot, fixed-complexity inference and generalizes well to unseen PN models without fine-tuning, highlighting its robustness and practicality for sub-THz receivers.

Deep learning models, notably Long Short-Term Memory (LSTM), have demonstrated promising performance in channel estimation for high-mobility vehicular environments. However, their black-box nature and architectural overhead limit trustworthiness and efficiency. Classical explainable AI (XAI) methods rely on costly iterative processes, offering only input-level filtering without addressing architectural fine-tuning. To overcome these limitations, this paper proposes the XAI-assisted Recurrent neural network Attribution for Channel Estimation (X-RACE) framework. X-RACE uses a low-complexity, one-shot dual-optimization strategy to simultaneously evaluate and prune irrelevant input subcarriers and internal hidden units. Furthermore, we propose novel temporal XAI metrics: Saturation Time, Importance Drift, and Relevance Contrast to characterize the LSTM's learning dynamics and memory convergence. Extensive simulations demonstrate that X-RACE reduces inference complexity by at least 44.1% while improving or preserving Bit Error Rate (BER) performance, outperforming classical XAI schemes.

Per-token gating of forward/reverse KL losses has become a standard technique for on-policy knowledge distillation (OPD), but existing methods such as EOPD (Jin et al., 2026) and ToDi (Jung et al., 2025) each fix a single gating signal and a single gating direction, and the two have never been compared directly. We introduce a four-coefficient parameterization lambda_t = sigma(a * h_t + b * u(x) + c + d * gap_t) in which direction-aligned proxies of EOPD and ToDi appear as one-dimensional (1D) restrictions, and which adds multi-channel composition and an explicit bias as further degrees of freedom. On TweetEval (Barbieri et al., 2020) emotion and hate, with a Qwen3-32B teacher and a Qwen3-4B student, configurations in the full family reach higher accuracy than the matched-magnitude single-channel (entropy-only / gap-only) 1D restrictions in 33 of 36 comparable cells, and a 26-cell mean-match isolation experiment places dynamic gating ahead of effective-KL-matched static baselines in 19 of 26 cells. Because cells share training data, models, and parameter substructure, we report both counts as exploratory aggregate directional evidence rather than as independent hypothesis tests. Targeted three-seed paired replications of the nine headline comparisons singled out by that sweep -- including a third task, offensive -- are directionally consistent, but individually smaller than the single-seed estimates and not significant at n=3. We therefore present the parameterization primarily as a shared coordinate system for comparing per-token gating designs in short-output classification OPD.

Inference energy per token drives the cost and carbon footprint of deployed transformers. It is dominated by dense matrix products that incur fused multiply-accumulate (FMA) operations and memory traffic. To reduce these computations while retaining dense tensors for high GPU throughput, we develop a methodology from first principles to adapt structural complexity during training to maximize inference utility per unit compute. Channel penalties drive entire tensor slices to zero to enable physical removal while preserving density and the network function. The natural approach, penalizing the norm of operator components acting through each channel, is provably destabilized by gauge freedom. We resolve this pathology with GaugeLasso: additive symmetric group-lasso penalties that recover a monotone function of product-norms when the network converges to gauge balance. Our equilibrium analysis enables per-channel calibration to correctly suppress slices that under-perform in inference utility per unit compute. Under adaptive pressure, the network reorganizes into depth-dependent structural profiles that can be far smaller than the architecture required to learn the task. On polynomial long division over $\mathbb{F}_{31}$, compute compresses from 148 to 255 times with perfect accuracy. On character-level language modeling, compressed models outperform the hand-designed baseline at equal FMA. On masked autoencoding, a compression trial exposes which axes were over-provisioned and which saturated, guiding a better second design. Compaction also accelerates training monotonically as the model progresses. Post-hoc pruning with the same utility ranking cannot reach these structures, showing that sustained pressure is central to discovery of efficient models. Retraining a discovered architecture recovers baseline quality on our statistical tasks, but fails on our exact algorithmic task.

This paper proposes a general framework for stable and effective iterative audio separation with mixture consistency by extending source separation models to a multi-input multi-output (MIMO) configuration. In the field of audio separation, mixture consistency is an essential property for many applications that require accurate phase and timbral information of target sources. While iterative approaches such as diffusion models achieve perceptually superior results in speech enhancement or user-guided target source separation tasks, most existing methods focus on single-step separation with a single-input single-output (SISO) or single-input multi-output (SIMO) configuration through architectural improvements, since mixture-consistent audio separation is generally regarded as a regression problem that admits a unique solution. By extending these architectures to a MIMO configuration, we introduce iterative prediction without compromising the architectural advantages or the characteristics of mixture consistency. We conduct a comprehensive ablation study of combining the framework with discriminators and extending it to a generative model. Experimental results demonstrate significant performance improvements when applying the proposed framework to state-of-the-art separation models.

Realizing full-duplex spoken dialogue requires large amounts of two-channel, one-speaker-per-channel conversational speech data. Although conversational text-to-speech (TTS) engines have been developed, they are not necessarily robust to two-party simultaneous phenomena such as backchannels, interruptions, and overlaps that occur while the interlocutor is speaking. In this work, aiming at conversational speech synthesis that reproduces human-like overlap, we propose KABURI-TTS. KABURI-TTS takes a per-speaker phoneme raster as input and renders the speech of the two speakers on separate channels, conditioned on the per-frame phonemes and the voice activity derived from them. Because the phoneme raster is supplied by a separate module, the proposed method enables controllable generation of one-speaker-per-channel, two-party spoken dialogue. A user evaluation shows that, compared with strong baselines, the proposed method attains higher naturalness at both the utterance and the interaction level. Furthermore, an analysis of voice activity confirms that the proposed method produces more overlap and more frequent turn-taking.

Real-world image super-resolution (SR) increasingly relies on Diffusion Transformer (DiT) backbones, whose internal activations can be dominated by a small number of massive channels. Yet improving perceptual quality in these models still typically requires fine-tuning the network or attaching additional adapters, leaving this structured activation space largely unexplored for adaptation. We investigate whether dominant channels can instead serve as a compact adaptation interface for frozen DiT-based SR models. We first characterize their behavior in pretrained SR backbones and show through controlled interventions that they strongly affect reconstruction quality. Building on this observation, we introduce SPARK, a lightweight input-conditioned controller that predicts bounded per-channel affine transformations for only the selected channels, while keeping the SR backbone and VAE frozen. Dominant channels are identified through an online activation-ranking procedure, and only a small predictor conditioned on the low-resolution VAE latent is optimized. Experiments on three DiT-based SR backbones across DIV2K, RealSR, and DRealSR show consistent gains in both fidelity and perceptual quality while modulating only eight channels per stream and block. Controlled comparisons further show that these gains cannot be explained by parameter budget or access to the selected channels alone.

Soft eversion robots, also known as vine robots, have attracted growing interest for navigation and inspection tasks, including minimally invasive medical applications [1]. A vine robot consists of a thin, flexible, inextensible tube folded inward that everts and grows forward when pressurized. This tip-growth enables navigation with minimal friction, making vine robots well suited for complex environments such as the human colon [2]. While their inherent softness allows passive conforma- tion to curved pathways in confined spaces, navigation performance strongly depends on environmental inter- actions, including contact angle and the length of un- constrained deployed material [3], [4]. Sharp directional changes, such as those in the sigmoid colon, often limit passive growth and necessitate active steering. Existing solutions include distributed artificial muscles [5] or dedicated tip-based steering mechanisms [6]. In addition, many applications require payload delivery, such as sensors and tools [7], [8]. Within the ERC Synergy project EndoTheranostics, this motivates the development of vine robots capable of delivering micro- surgical tools during growth. Prior work has integrated working channels within the vine body [8], [9], but these approaches constrain tool size, introduce friction, and limit access to the environment to the robot tip. In this work, we propose a multi-vine architecture in which two vine robots are coupled to an externally integrated working channel via soft mounting tips [10]. Independent vine actuation enables active tip steering while advancing the working channel without embed- ding it within the vine bodies Figure 1. Experiments demonstrate sharp steering of nearly 90 degrees during growth, highlighting the potential of this architecture for versatile medical and non-medical applications.

Most single-channel separators estimate a source by applying a real gain to the mixture in each time-frequency bin. The optimum of that format, which the oracle masks used as bounds do not attain, is the orthogonal projection of the source onto the line spanned by the mixture, its residual set by the angle between them. Locating an estimator reduces to the block structure of a real-linear operator on stacked spectra, giving a chain of four nested classes whose three larger terms match three assumptions on the prior: zero means, circularity and absence of inter-frequency coupling. Held fixed the chain is a cascade of four orthogonal projections; refitted per frame it collapses onto its first term, attributing the whole residual to one missing real parameter per bin, the phase. When the phase posterior is symmetric about the mixture direction, the minimum mean-square estimate falls back onto the line, with gain the posterior mean of the oracle gain and excess error its variance. On MUSDB18 a posterior mean under a non-circular Gaussian-mixture prior leaves the class yet stays 11.44 dB under the per-frame ceiling, which four times as many components and 7.5x the data do not close; a closed-form gate attributes some 70% of it, in decibels, to the predicted variance. The widest fixed class stays 6.70 dB under the same ceiling. Leaving the class and minimising squared error are conflicting requests: the barrier lies in the criterion rather than in the prior.

The rapid growth of AI computing has driven increasing demands for flexible and high-capacity data-center interconnections. Owing to its ultra-wide bandwidth and high spatial reuse capability, terahertz (THz) communication has emerged as a promising solution for future wireless data centers, while digital twins (DTs) enable efficient wireless planning and real-time optimization. In this work, a measurement-driven multi-layer DT framework is proposed for THz wireless data centers, where the physical, channel, evaluation, and manipulation layers are progressively constructed from bottom to top. First, extensive channel measurements are conducted at 140, 220, and 300 GHz to characterize frequency-dependent propagation behaviors. Based on the tri-band measurements, a measurement-calibrated physical twin is established by jointly optimizing the geometry, material, antenna, and hybrid propagation models. On top of the physical twin, a line-of-sight (LoS)-aware implicit neural field is developed to construct an AI channel twin for efficient channel reconstruction. The proposed AI twin learns location-dependent channel statistics from the calibrated twin, enabling real-time prediction of received power and LoS probability. Building upon the reconstructed channel field, a system-level evaluation layer is derived to analyze coverage and interference for both AP-to-rack and rack-to-rack communications. Experimental results show that the proposed AI twin achieves lower power reconstruction error than existing neural-field baselines while maintaining real-time inference capability. Moreover, the ceiling-mounted AP deployment achieves over 90% coverage under a 10 dB signal-to-interference-plus-noise ratio (SINR) threshold, demonstrating the effectiveness of the proposed DT framework for THz wireless data-center planning and optimization.

A long-standing open problem in robot manipulator control is whether global regulation can be achieved by classical PID control. This paper provides an answer to this question for classical PID controllers with triple parameters (k_p,k_i,k_d) in R^3. We find and prove that for one-degree-of-freedom manipulators, the classical PID control guarantees global stability and asymptotic regulation under standard structural assumptions, and further derive explicit quantitative design conditions for the PID gains. However, for multi-degree-of-freedom cases, we can construct a robot manipulator satisfying the same structural assumptions for which no choice of PID gains (k_p,k_i,k_d) can achieve global asymptotic regulation. These results provide a fundamental understanding of the abovementioned open problem, revealing both the fundamental capability and intrinsic limitation of the classical PID control for robot manipulator dynamics.

The evolution toward sixth-generation (6G) wireless networks is driving larger antenna arrays and highly directional multi-beam transmission, making accurate knowledge of beam-dependent spatial coverage important for beam management and environment-aware network operation. Radio maps (RMs) provide such a representation, yet conventional RM prediction assumes omnidirectional or transmitter-level radiation. In beamformed multiple-input multiple-output (MIMO) systems, one propagation scene instead gives rise to many configuration-dependent beam radio maps (BeamRMs), creating challenges in beam representation and generalization. Existing methods either condition prediction on beam descriptors or use beam maps as auxiliary inputs to generic architectures. We propose BeamRMX, which, to the best of our knowledge, is the first dedicated framework to treat the spatial radiation pattern as the primary BeamRM query and learn how scene geometry transforms it into the received power field. XBase learns multiscale interactions between the radiation query and scene geometry, while an optional Evidence Adapter uses a few cross-configuration BeamRMs from the same scene. Matched-domain and zero-shot experiments show consistent gains over deterministic and diffusion baselines, including mean absolute error reductions of 26.1% on unseen scenes and 47.8% on an unseen configuration. Cross-configuration evidence further improves reconstruction and intra-sector beam refinement.

Beamforming methods in millimeter-wave (mmWave) cell-free massive multiple-input multiple-output (CFmMIMO) systems require accurate channel state information (CSI), whose acquisition entails significant training overhead. This paper shows that fully digital cell-free mmWave beamforming can be effectively learned from sub-6 GHz CSI using a graph neural network (GNN). Specifically, we represent a CFmMIMO system as a wireless graph, and the GNN is trained to approximate beamformers that maximize the downlink sum-rate based on the available sub-6 GHz CSI. A message-passing mechanism is proposed to capture inter-user interference and inter-base-station cooperation across different network topologies. Simulation results demonstrate that the proposed sub-6 GHz-assisted GNN-based beamformer achieves competitive and often superior sum-rate performance compared to classical baselines that rely on full mmWave CSI.

Many synthetic-image detectors produce accurate predictions but offer limited insight into how those decisions are formed. This paper introduces Hierarchical Channel Stacking (HCS), a compact framework for AI-generated image detection that converts intermediate CNN activations into a structured 60-dimensional representation organized across three progressively deeper backbone stages. HCS uses per-channel Level-1 classifiers and a Level-2 aggregator to produce image-level predictions while preserving explicit hierarchical structure for analysis. On a benchmark spanning GAN and diffusion generators, HCS achieves 86.7% accuracy and 86.7% macro-F1 on the held-out test set. Stage ablation shows that the full three-stage system outperforms reduced single-stage and two-stage variants, indicating that the hierarchy carries complementary predictive information. Stage-level contribution analysis further shows that, in the analyzed detector setting, fake GAN and fake diffusion images exhibit distinct stage-level contribution profiles. These results position HCS not simply as a compact detector, but as a structured framework for studying how synthetic-image detectors assemble evidence across representation levels.

Dense IoT networks require reliable communication despite limited spectrum and substantial multi-user interference while maintaining manageable receiver complexity. This work introduces a deep-learning-based end-to-end multi-user communication design for interference-limited finite-blocklength IoT scenarios, focusing on short and medium blocklengths. We extend a prior 2-user SiameseNet transceiver framework to accommodate 2, 4, and 8 users, leveraging learned redundancy for interference suppression and noise robustness. Compared to conventional non-orthogonal access baselines, our method demonstrates strong Block Error Rate (BLER) performance across various scenarios without resorting to joint detection; the per-user decoder scales roughly linearly with the number of users. Further, we examine the robustness under interference mismatch and unequal interference strengths, critical for practical deployments with heterogeneous devices. The Latent-space analysis reveals that the learned codeword distance increases as the effective per-user rate decreases, corroborating with the observed BLER improvements. In addition, we also present preliminary results for a 2X2 MIMO setup under fixed-channel CSIT and CSIR, indicating potential for extending the framework to IoT gateways with multiple antennas.

Accurate 3D medical image segmentation requires the integration of long-range anatomical context with fine boundary detail. Existing methods often model global and local features in separate modules or feature levels and perform channel recalibration independently. This may cause semantic mismatch between global context and local boundaries, insufficient channel relationship modeling, weak spatial-channel interaction, and redundant representations. We propose CDGC-Net, a 3D medical image segmentation network that combines cooperative dual-scale spatial attention with grouped hierarchical channel modeling. With-in each CDGC block, Cooperative Dual-Scale Self-Attention (CDSA) assigns attention heads to parallel local-window and global-sparse branches. The two branches capture fine spatial details and long-range anatomical context at the same feature level. Their outputs are concatenated into an $N\times C$ spatial representation and directly passed to Grouped Hierarchical Channel Attention (GHCA). GHCA organizes the channels into $r$ groups and models both within-group and cross-group dependencies. CDSA and GHCA reuse a shared key projection to maintain a consistent feature reference. Residual feature alignment subsequently integrates the refined features with the original representation. On the Synapse, ACDC, BraTS, and LA datasets, CDGC-Net achieved mean DSC values of 86.96%, 92.91%, 82.56%, and 93.52%, respectively, exceeding the next-highest reported values by 0.39, 0.47, 0.17, and 0.32 percentage points. CDGC-Net contains 25.83M parameters and 28.62G FLOPs for an input size of $64\times128\times128$, reducing these quantities by 39.87% and 40.30%, respectively, relative to UNETR++. These results indicate a favorable trade-off between segmentation accuracy and computational complexity.

Power amplifier (PA) nonlinearity and memory effects significantly limit the spectral compliance, reliability, and energy efficiency of communication systems. To address this, we propose a transfer-learning-enabled, fully digital transceiver-cooperative method for amplitude-phase-time block modulation (APTBM)-based nonlinear single-carrier transmission under adjacent channel leakage ratio (ACLR) constraints. At the transmitter, iterative clipping and filtering (ICAF) and static digital pre-distortion (SDPD) act jointly to reduce signal peaks and suppress spectral regrowth without requiring wideband feedback. At the receiver, the inherent amplitude-phase constraints of APTBM provide weakly supervised prior knowledge for offline inverse-model pretraining, which is followed by the online few-shot adaptation of a lightweight digital post-distortion (DPoD) network. Subsequently, a cascaded DPoD and clipping-noise cancellation scheme systematically compensates for residual distortions induced by both the PA and ICAF. Simulation and measurement results demonstrate reliable transmission at an input back-off of approximately 2 dB under a 30-dBc ACLR constraint. Furthermore, the proposed DPoD approach significantly reduces online training time and computational overhead, delivering a performance gain of over 2 dB compared to conventional learning-based DPoD schemes.

Motivated by the IEEE 802.11bf effort to standardize advanced WLAN sensing, interest in Wi-Fi Channel State Information (CSI) for passive, device-free, and privacy-preserving activity and gesture recognition has grown rapidly. Recent studies have shown that Doppler velocity projections extracted from CSI, which directly reflect human-motion velocity, enable more robust human activity recognition (HAR) and stronger generalization across users and unseen conditions. Nevertheless, reliable generalization under real-world variability remains a major challenge, hindering the adoption of Wi-Fi sensing in real-world applications. To address this challenge, we introduce Doppler Radiance Fields (DoRF), bringing the concept of neural radiance fields (NeRF) from computer vision into Wi-Fi sensing. DoRF models Doppler velocity projections extracted from Wi-Fi CSI as sparse and diverse virtual-camera views of human motion. It then infers a latent 3D motion sequence whose projections along learned effective Doppler directions explain the CSI-derived Doppler observations. The recovered motion is subsequently projected onto an equiangular grid of directions on the unit sphere, producing a spherical representation of the underlying motion. Since DoRF naturally defines the Doppler representation on spheres, we further introduce DoRF++, a spherical-learning design that applies spherical Transformers for activity classification. Experiments on our collected hand-gesture dataset show that DoRF++ significantly outperforms state-of-the-art Wi-Fi-based HAR methods in cross-user generalization accuracy, especially for difficult gestures in settings with a single multi-antenna receiver access point (AP).

Estimating volumetric mechanical properties, including Young's modulus, Poisson's ratio, and density at each voxel, is intrinsically ambiguous from vision alone, as visually similar objects may have substantially different material compositions and physical behavior. Existing approaches predict these properties independently across voxels, overlooking the piecewise-constant material structure of real objects and producing noisy or inconsistent estimates for voxels that share the same material, while lacking an explicit mechanism to resolve visual ambiguity. We introduce ViWi (Vision Meets WiFi), an object-centric framework for volumetric mechanical-property estimation. ViWi represents each object using a compact set of material slots that aggregate evidence from voxels with a shared material identity and produce coherent slot-level property predictions. To complement visual appearance, ViWi incorporates a compact RF descriptor generated through WiFi-band electromagnetic simulation using permittivity and conductivity. The RF descriptor conditions the material slots with global composition cues that may be unavailable from images, while visual features preserve voxel-level spatial localization. Across volumetric mechanical-property and mass-estimation benchmarks, ViWi improves over the prior state of the art on four of six per-voxel metrics, while its vision-only variant improves all mass-estimation metrics. These results demonstrate that combining object-centric material structure with complementary RF evidence enables more accurate and physically coherent volumetric property estimation beyond what is possible from visual appearance alone.

Latent world models plan by predicting future states from an action, but when a scene contains motion the agent does not control, they quietly go action-blind: predictions for different actions become indistinguishable even as the training loss keeps improving. Existing remedies suppress this distraction with reconstruction, task reward, or auxiliary objectives, each adding machinery or assumptions. We show that a minimal alternative suffices, borrowed from the dueling decomposition of value into a state baseline and an action advantage: in latent dynamics, subtracting a prediction's mean effect over actions cancels whatever the actions share--the action-independent variation where distractors live--leaving a clean, controllable channel, with no reward, no reconstruction, and no distractor-specific auxiliary loss. Because this is only a subtraction at readout time, it applies unchanged to any action-conditioned world model, including frozen pretrained ones. Across a gridworld, synthetic generators with known factors, distracting continuous control, and natural-pixel Atari, the isolated channel recovers the agent's own effect where entangled predictors fail, with nuisance leak indistinguishable from zero; applied post hoc it surfaces an action channel in off-the-shelf models that their raw readouts miss, and it converts into goal-reaching control in the gridworld. We prove the cancellation is exact in finite samples for both discrete and sampled action sets, and we state its measured boundary--distractors whose motion tracks the action--together with the remaining limitations in the appendix.

Beamforming plays a key role in multiple-input-multiple-output (MIMO) communication systems. However, conventional beamforming design normally requires accurate instantaneous channel state information (CSI) and iterative optimization, which incur substantial pilot overhead and computational complexity. Recognizing that radio propagation is intrinsically governed by the physical geometry, we develop a 3D Gaussian splatting for environment-aware beamforming (GSBF) pipeline based on multi-modal data, which characterizes the environment through a persistent 3D Gaussian representation. Specifically, GSBF models the environmental scattering response with reciprocity-preserving bidirectional spherical Gaussian (Bi-SG) kernels and performs two-sided electromagnetic rasterization to render an angular propagator map. The rendered map is then aggregated through an over-complete array-manifold dictionary and projected to the constant-modulus beamformers, thereby synthesizing beams directly from the access point (AP) pose and user position without online instantaneous CSI. Simulations demonstrate that GSBF consistently outperforms baselines such as exhaustive beam alignment (EBA) with lower latency.

Near-term quantum hardware limits circuit depth and often imposes geometrically local connectivity for quantum generative models, restricting the output distributions accessible to shallow unitary Born models. Introducing stochasticity into a unitary quantum Born model can improve the empirical generative performance of the resulting channel model and, for a restricted small-scale architecture, has been proven to represent a strictly larger family of distributions than its unitary counterpart. However, whether such randomness provides a provable separation at fixed shallow depth for arbitrarily large systems has remained open. Here, we show that shared classical randomness, a comparatively weak resource from entanglement theory, is sufficient to establish such a strict scalable representational separation over the corresponding shallow unitary Born model. More specifically, we augment bounded-connectivity shallow unitary circuits, followed by computational-basis measurements, with spatially separated local Pauli operations, whose joint application is controlled by a single classically sampled random bit. The resulting shallow-depth channel model generates long-range correlations in the classical output distribution that no purely unitary shallow-depth model with bounded connectivity can reproduce. For one-dimensional nearest-neighbour architectures, reproducing such distributions with a purely unitary model can require depth $Ω(N)$ in the worst case. We further show that measurement-based quantum computation (MBQC) provides a natural implementation of the required shared classical randomness through suitable adaptation of the random measurement outcomes. Numerical experiments on MBQC-based generative models support the analytical results.

Integrated Sensing and Communication (ISAC) combines sensing and communication to efficiently utilize wireless resources and is emerging as a key paradigm for next-generation wireless networks. By leveraging the wide bandwidth, high frequencies, and massive antenna arrays of 5G-Advanced and 6G systems, ISAC enables physical-layer sensing using Channel State Information (CSI). The 3rd Generation Partnership Project (3GPP) Release 19 identifies 32 potential ISAC use cases, with particular emphasis on detecting and tracking moving objects. In this work, we address the Sensing for Railway Intrusion Detection use case, where intruders, including wildlife, entering a railway track can pose serious collision risks. We generated 22,695 CSI matrices with corresponding ground truth using a 3D-rendered railway environment and the Sionna radio simulator. We developed a machine learning model combining a three-dimensional Convolutional Neural Network (3D CNN) and Bidirectional Long Short-Term Memory (BiLSTM) network to detect intruders in the track danger zone and estimate their real-time position relative to the train, velocity, and time to collision. On synthetic CSI data, the model achieves 99.57% intruder-detection accuracy on a balanced test set and a combined Mean Absolute Error (MAE) of 0.4240 for position, velocity, and time-to-collision prediction. These results demonstrate the potential of CSI-based ISAC sensing with machine learning for reliable railway intrusion detection. The complete codebase for CSI generation, preprocessing, and model development is publicly available at https://github.com/EdgeIntelligenceLab/6g-isac-railway-intrusion-detection.

Human input reaches language models by typing or speaking, and each channel leaves a distinct signature: orthographic noise for keyboards; for voice, disfluency from conventional transcription and restructuring from AI-backed dictation tools. How do they impact an LLM's performance? In this paper we present HIVE (Human Input-Variation Engine), a suite of voice transcription perturbations and QWERTY keyboard perturbations. We use HIVE to evaluate how robust models are to these perturbations. We present seven findings. (i) Voice transcription perturbations lower accuracy across every instruction-tuned model we test, and it is the structure of the transcription rather than its fillers that carries the cost. (ii) QWERTY keyboard perturbations cost less, and a model absorbs a lot of them before accuracy falls away. (iii) Both trace back to one cause, how many of the question's tokens survive the perturbation: destroying a token is what hurts, while adding new ones alongside it costs little. (iv) The gap between the two channels appears only where the answer must be constructed or deduced; on multiple choice there is none. (v) The harm does not solely come from test-set contamination. (vi) It cannot be trained away with lightweight adaptation. (vii) A thinking budget recovers the keyboard channel almost entirely but leaves the spoken registers untouched, and compressed speech is worse with it.

Wi-Fi networks are moving beyond random channel access toward tightly coordinated operation across access points (APs), a shift reflected in Wi-Fi 8's multi-AP coordination (MAPC). However, the current MAPC specification restricts cooperation to AP pairs, fundamentally limiting the gains achievable in dense deployments and calling for scalable, network-wide coordination in beyond Wi-Fi 8 systems. We target coordinated spatial reuse (Co-SR), where APs transmit concurrently at reduced power. Effective Co-SR demands joint selection and configuration of AP-station transmissions, yet existing approaches simply do not scale: they rely on heavy signaling, slow convergence, unrealistic assumptions, and often require computation time that explodes with network size. We introduce FM4WiFi, a generative ML pipeline that addresses these limitations by producing high-quality Co-SR configurations in a single inference step. FM4WiFi integrates (i) an autoencoder that learns compact latent representations of network states, (ii) a flow-matching generative model that synthesizes feasible Co-SR configurations (including rate control, absent from prior work), and (iii) a surrogate rate predictor that allows rapid, large-scale Co-SR candidate evaluation without dependence on a live system or digital twin. Across extensive evaluations (including experimental validation), FM4WiFi matches or exceeds state-of-the-art baselines at medium-to-large scales and scales to 30+ APs with sub-second inference. Extensive ablation studies validate each modeling and optimization choice.

Future integrated sensing and communication (ISAC) architectures separate the sensing entity (SE) that acquires measurements from the sensing function (SF) that performs inference, creating a need for compact, task-oriented feedback on the SE-SF interface. Forwarding the raw channel frequency response or full per-link delay-Doppler-azimuth-elevation (DDAE) tensor is prohibitively expensive, while peak-only reporting discards target-discriminative structure under clutter. We propose a learning-based coarse-to-fine sensing pipeline with candidate-latent feedback for single-target estimation. At the SE, a lightweight convolutional scorer produces a dense delay-Doppler proposal map from pilot-based OFDM channel estimates, and a learned encoder constructs K compact C-dimensional candidate tokens by fusing per-candidate azimuth-elevation patches, normalized position, and confidence cues. The latents are uniformly quantized post-training to b bits and transmitted under a finite budget B_fb = bKC + 18K + 16 bits to the SF, which performs cross-candidate refinement, reranking, and joint four-parameter estimation. On a ray-traced urban scene with static and dynamic clutter, three operating points in the (K, C, b) design space achieve 96.33-98.88% detection at 107-806 bytes per coherent processing interval, compression ratios of 1.2-9.2 x 10^4 over the 8-bit DDAE magnitude tensor, reducing the SE-SF interface from multi-Gbit/s to sub-Mbit/s rates. Cross-scene evaluation on an independent campus-scale environment achieves 98.79-99.50% detection and at-or-better angular accuracy without retraining, indicating that the learned representation captures target-relevant structure that transports across scenes of comparable or lower clutter density.

Machine unlearning aims to eliminate the influence of sensitive data on a model. In the real world, unlearning requests arrive continually, which gives rise to two challenges. First, an unlearning intervention may redistribute target-related computation across remaining pathways, allowing previously forgotten knowledge to re-emerge. Second, repeated unlearning interventions may progressively reduce the model capacity needed to preserve retained utility. To address these challenges, we propose the Trajectory-guided Forget-Recover Network (TFR-Net). TFR-Net tracks channel-level risk across requests. It separates persistent target-related channels from transient hotspots and suppresses only the persistent ones. TFR-Net also recovers model capacity by reactivating dormant channels. These channels make strong contributions to retained utility and show low current and historical forget risk. The recovery is accepted only when retained-utility degradation remains within a predefined tolerance. Experiments on four datasets show that TFR-Net consistently achieves a more favorable trade-off between unlearning effectiveness and retained utility than representative baselines.

A bfloat16 transformer can train normally for many steps and then collapse abruptly. Distinct low-precision errors can trigger the same failure, leaving unclear whether each source needs its own repair or one shared route can be blocked. We isolate a reproduced GPT-2-class collapse to the streaming-softmax accumulator, where fp32 accumulation repairs it, and use the fault as an assay for moving controlled errors across sources. Errors placed outside attention still drive the same query-key (QK) spectral runaway, while correcting only QK keeps training stable with the source fault active. This source-channel dissociation shows that fault source is not failure channel. It holds across the tested architectures and scales and reproduces on a second GPU architecture. A causal probe projects each update off the current QK weights' leading three singular directions: the query projection's largest singular value stays at 11.1, whereas removing equal energy elsewhere leaves it at 237. The QK channel therefore drives the early runaway rather than merely tracking it. Entry depends on temporal sign-coherence across steps, not aggregate deviation. QK-Guard closes the channel with a dormant controller that switches on parameter-free QK normalization when attention-logit saturation begins. It contains every tested runaway and matches always-on QK normalization over 60k steps, while non-QK actions at the same trigger fail. The results support intervention at the shared QK locus rather than separate repair at each fault source.

Federated learning (FL) enables distributed optimization and learning across decentralized edge devices while preserving data privacy, but its performance is fundamentally constrained by heterogeneous data distributions, limited communication resources, and energy availability. In practical wireless networks, mobile devices (MDs) often exhibit diverse data and learning objectives, naturally forming clusters of users with jointly trainable models. When devices rely on energy harvesting (EH), stochastic energy arrivals further complicate participation and scheduling under communication constraints. In this work, we study over-the-air (OTA) FL with EH MDs under heterogeneous data distributions, and investigate two closely related learning objectives within a unified framework: one aiming for a more representative global model by reducing data bias, and the other learning more personalized cluster-specific models by exploiting this bias. In the global training mode, cluster information guides energy- and diversity-aware scheduling, ensuring that the scheduled active users provide a more representative aggregate update. In the personalization mode, the same cluster structure defines cluster-level learning objectives and OTA recovery targets, enabling the parameter server to train multiple cluster-specific models through simultaneous transmissions over the wireless multiple-access channel. Numerical results demonstrate that the proposed unified framework improves fairness or personalization, depending on the operating mode, while reducing communication overhead.

Recently, Wi-Fi sensing has played a significant role in Human Activity Recognition (HAR), as it enables the detection of various activities using only Wi-Fi signals, ensuring privacy and remaining non-intrusive for the user. However, environmental characteristics such as reflective surfaces, hardware offsets, and other physical impairments affect recognition by the neural network, subsequently causing errors and significantly reducing model accuracy. To overcome this problem we present the WiFuse framework, a dual-stream Channel State Information (CSI) framework for human activity recognition (HAR) that pairs denoised time-domain amplitude variations with 2D-FFT-derived Delay-Doppler motion representations computed from the sanitized channel phase. The fused representation feeds a hybrid ResNet-Temporal Convolutional Network (TCN) neural architecture augmented with channel and spatio-temporal attention, where the ResNet extracts spatial-spectral features and the TCN models long-range temporal dependencies; a decoupled two-stage transfer learning strategy is employed to improve optimization stability and feature reuse. We conduct extensive experiments on two public datasets, including comparisons against state-of-the-art methods and alternative hybrid architectures, ablation studies, and cross-dataset and domain-adaptation evaluations. The proposed framework reaches an overall accuracy of up to 95.28% across the four environments of the XRF55 dataset and up to 98.20% on the multi-user Wi-MIR dataset. Overall, the results indicate that combining amplitude and Delay-Doppler representations within a dual-stream strategy, enhanced by transfer learning, improves recognition performance under conditions that typically degrade deep neural networks, such as class overlap, multipath propagation, noise, and interference.

The push for broader coverage in future cellular networks depends on reliable service, yet this is increasingly harder to do as we encounter more instances of extreme weather conditions. In extreme weather conditions, we have difficulty evaluating coverage due to limited access to channel measurements. In this paper, we generate channel state information (CSI) in low and moderate weather conditions to synthesize realistic MIMO CSI under adverse weather conditions. Our primary contributions are to (1) synthesize MIMO channel datasets incorporating three weather types, each with three intensity levels, representative of practical 5G/6G scenarios; (2) train a diffusion model conditioned on weather using channel samples obtained through conventional pilot-based estimation under low and moderate weather intensities, and subsequently use it to generate channel realizations for severe weather conditions; and (3) evaluate the downlink Bit Error Rate (BER) and Outage Probability measures using the generated channels. The results show that diffusion-based generative models provide a scalable, data-driven alternative for channel modeling in harsh environments and can generalize to severe weather conditions using only low- and moderate-intensity training data.

Accurate multipath parameter estimation is critical for modern wireless communication systems, particularly in challenging low-SNR environments. Traditional Maximum Likelihood Estimation algorithms, such as CLEAN, provide high-resolution parameter extraction but suffer from prohibitive computational complexity due to exhaustive grid search. Conversely, purely data-driven deep learning approaches lack physical grounding and struggle to generalize across variable multipath densities and off-grid parameters. To address these limitations, this paper proposes Neural Network-Assisted CLEAN (NN-CLEAN), a hybrid framework that embeds a multi-head residual network directly into the iterative CLEAN extraction loop. By replacing the exhaustive grid search with rapid, parallelizable forward passes while delegating residual subtraction to exact mathematical models, NN-CLEAN isolates physical multipath parameters without accumulating non- physical errors. Extensive Monte Carlo simulations demonstrate that NN-CLEAN achieves estimation accuracy exceeding 96% at 5 dB SNR, matching the traditional Grid-Search CLEAN (GS- CLEAN) baseline, while providing a massive reduction in computational complexity and substantially outperforming subspace methods and standalone one-shot neural networks. Crucially, NN-CLEAN exhibits a near-flat scaling in execution runtime and memory consumption as batch sizes increase. This highly efficient parallelization establishes NN-CLEAN as a robust, real- time solution for channel estimation in MIMO systems.

Centrally-managed Wi-Fi solutions are increasingly leveraging Distributed Artificial Intelligence (AI) to predict key operational statistics of Access Points (APs) and proactively optimize network performance. In this context, Clustered Federated Learning (CFL) represents a fitting methodology, enabling the generation of multiple AI models that account for diverse statistical properties of the APs data distribution. However, identifying informative clusters for grouping APs models remains a significant challenge. In this paper, we address this problem by proposing a novel CFL tool integrating a two step clustering procedure. Initially, multiple clustering solutions are generated and filtered based on a minimum set of desired clustering criteria. Subsequently, if no solutions meet sufficient quality metrics, a global model is produced by aggregating all AP models. Otherwise, the final clustering solution is selected as the one that maximizes the informativeness (quantified via differential entropy) for the smallest cluster. Our results, focusing on a Wi-Fi traffic prediction problem, demonstrate that the developed CFL tool achieves the best predictive performance among all evaluated distributed strategies and the lowest communication and energy footprint among the clustered ones, exceeding the cost of single-model FL only in the regimes where it markedly improves accuracy.

Symbolic regression provides analytical expressions, but it is usually applied one output at a time. This is limiting in process systems, where state variables are often coupled through shared physical parameters. Independent symbolic regression can give accurate individual equations that are difficult to interpret as one model. We present a neuro-evolutionary symbolic regression method for coupled multi-output systems. The method searches for a shared symbolic backbone: a set of latent symbolic units that is discovered once and reused by several outputs through sparse additive or multiplicative read-outs. The discrete model structure is evolved by mutation and crossover, whereas the continuous parameters are tuned by gradient descent and inherited by the offspring. The method is assessed on a set of benchmarks with known ground truth and on a hydrothermal liquefaction yield case. The results show that coupling is not a general route to lower prediction error. Its main contribution is the enforcement and diagnosis of cross-output consistency when a physically shared factor is embedded in a latent expression and is weakly identifiable from the data. This occurs for Langmuir-Hinshelwood and site-coverage denominators, for which independent PySR does not close the consistency gap or recover the same shared form. Conversely, when each output is already identifiable, as in the Van de Vusse benchmark, independent symbolic regression matches or improves the coupled model. The proposed framework, rather than a general purpose predictor, is a structured shared-mechanism extractor. Its value is highest when the target structure is sparse, shared, weakly identifiable or constrained by closure.

Deep learning surrogate models trained with mean-squared-error loss produce statistically accurate but physically unconstrained flood predictions: water may flow uphill, appear spontaneously, or smooth over street-level corridors. We develop a physics-informed training framework for CNN-LSTM models that predict urban flood depths at 15 min intervals over a 128x128 spatial grid. Three differentiable penalty terms are embedded into the loss: (i) a gravity loss penalizing depth increases against the water-surface-elevation gradient, (ii) a continuity loss enforcing local mass conservation with rainfall-adaptive thresholds, and (iii) a topography-aware false-alarm penalty modulated by the topographic wetness index (TWI). We evaluate on the Norfolk, Virginia flood dataset spanning two storm events (August 2017 and September 2022, 300 samples), with all variants trained on identical splits and robustness assessed over repeated random splits and leave-one-storm-out tests. A road-proximal evaluation restricted to a TWI-derived street mask quantifies street-level skill. The physics-constrained model achieves near-zero gravity violations (order 1e-6) and the highest street-channel recall (0.77 +/- 0.09 vs 0.44 +/- 0.10 for the unconstrained baseline), the capability most relevant to traffic routing, and its advantage more than doubles on a held-out storm; a uniform false-alarm variant attains 16% lower mean absolute error but suppresses street recall to 0.25. The TWI-modulated penalty reconciles this trade-off: it improves on the uniform variant on every metric, recovering 60% higher street recall at the lowest MAE among constrained variants and the best street-level F1. These results expose a fundamental tension between aggregate pixel-level error and application-specific physical plausibility, and show that terrain-aware loss modulation offers a principled resolution.

A robot carrying a persistent, behavior-annotated map faces two planning questions, and its memory answers only one well. The \emph{spatial-navigation} question -- how to walk around a room -- we address first and report a negative: building on Vision--Language--Motion Maps (VLMM), a behavior-aware planner cost cuts a planning-time objective by $\sim$35% over 28 AI2-THOR scenes, but under closed-loop execution the real benefit nearly vanishes ($\sim$4%) and an on-demand vision--language model (VLM) does as well. The \emph{resource-allocation} question differs: under a limited perception budget, what should the robot re-observe now to keep its map fresh? Framing re-perception as this attention decision, we show a persistent map's memory (change-history, or even just recency of last sighting) yields the best schedule (held-out), matching an oracle, while the memoryless VLM prior is poor. Because the schedule reallocates budget toward what matters, memory's benefit concentrates on the important objects ($\sim$1.6$\times$ the mean), and a downstream fetch task confirms fewer wasted trips; the gain grows with per-instance heterogeneity exactly as a Cauchy--Schwarz bound predicts -- it equals $\mathrm{Var}(\sqrtλ)$, the variance of root-volatility. With a real CLIP prior on rendered objects the advantage is $+21$--$26\%$. The map's distinctive value appears when the task is \emph{language-conditioned}: told what to track, VLMM grounds the relevant objects (open-vocabulary) and tracks their change (memory), beating even a strong relevance-weighted recency baseline ($+2.5\%$) -- so its motion channel adds value beyond a last-seen timestamp -- and an on-demand VLM ($+8.9\%$); neither language nor dynamics alone suffices. The map earns its keep not by telling the robot how to walk around a room, but by telling it what to pay attention to.

Extremely large-scale reconfigurable intelligent surface (XL-RIS)-assisted communication is regarded as a key enabling technology for future 6G networks. However, hybrid-field channel estimation for XL-RIS-assisted systems is challenging due to the high-dimensional cascaded channel and the coexistence of far-field and near-field propagation. In this case, traditional full-dimensional sparse recovery methods require a large cascaded dictionary and suffer from severe computational and storage burdens. To address these challenges, we develop a double-timescale channel estimation framework that decouples sparse dictionary representation and recovery. Then, by exploiting the quasi-static property of the channel at the base station (BS) and RIS side, we propose a Dirichlet kernel-based off-grid dictionary compression (DK-ODC) scheme for sparse representation, which reduces the dimension of the corresponding dictionary as well as mitigates BS-side angular off-grid error. Furthermore, for the dynamic channel at the user equipment (UE) and RIS side, we propose a subspace-aware incremental variational Bayesian learning (SI-VBL) algorithm, which enables incremental learning of sparse channels by exploiting the identified low-dimensional subspace and pruning threshold. Analysis and simulation results confirm that the proposed framework avoids full-dimensional Bayesian recovery and achieves a favorable tradeoff among estimation accuracy, computational complexity, and storage overhead.

In multiple-input multiple-output (MIMO) semantic communication, imperfect channel state information (CSI) and equalization mismatch can seriously degrade semantic reconstruction quality. To address this issue, we propose a unified restoration flow matching (RFM)-based framework for channel refinement and equalization correction. Specifically, the channel RFM (CRFM) module is developed to refine the coarse channel, thereby improving channel estimation accuracy. Based on the refined channel, the developed semantic RFM (SRFM) module is employed to correct the residual distortions in the post-equalization latent space. The key idea is to formulate the two cascaded inverse problems of channel estimation and equalization as the unified conditional restoration task, in which the learned conditional velocity field guides the perturbed distribution towards the target distribution. To enhance the robustness of these two modules under various distortion conditions, we develop a dual-anchor perturbation training strategy that jointly learns near-manifold refinement and large-error correction, and implement inference through a few-step deterministic ordinary differential equation (ODE) solver. Extensive experiments on MIMO channels and visual semantic transmission tasks demonstrate that the proposed scheme improves key metrics for channel estimation and semantic reconstruction quality. Moreover, compared with representative diffusion-based generative baselines, the proposed method requires fewer sampling steps.

Large vision-language models are becoming increasingly dominant in 3D medical image interpretation, but we rarely know <i>which</i> internal units encode clinical findings or <i>where</i> that information lives in the representation. We first study this on a 3D chest vision-language model (Pillar-0) by probing its frozen vision embeddings. We show that (i) each radiological finding is encoded by a <i>sparse</i> set of ~10 vision-encoder channels that match full-feature classification performance and far exceed a zero-shot text prompting; (ii) turning off the channels tied to one finding, that finding's score collapses while unrelated labels stay stable; and (iii) the same sparse probe <i>replicates</i> on an architecturally unrelated 3D abdominal VLM (Merlin) suggesting a general property of frozen medical encoders. Our training-free concept channel probe (CCP) method, paired with a corpus-derived report template, outperforms published CT-CHAT on clinical efficacy and NLG metrics (F1 0.549 vs. 0.184; BLEU 0.483 vs. 0.373) at 22x lower latency. Our results provide a clear, reproducible characterization of how frozen medical encoders represent findings, demonstrating direct applicability across models.

Battery-free Internet of Things (IoT) requires iterative design of vibration energy harvesters (VEHs) under coupled physical constraints, while LLMs are emerging as interface layers for engineering workflows. However, existing engineering benchmarks primarily assess final artifact validity, offering limited insights into how LLMs behave across different stages of coupled physical design. We introduce VEHBench, an engineering-native diagnostic benchmark for LLM-assisted VEH design, featuring 763 literature-grounded tasks scored by an analytical physical oracle. VEHBench evaluates four design roles: specification triage, verifier-guided search, corrupted-state recovery, and policy-conditioned selection. Experimental results reveal that LLM capability is strongly stage-dependent: no single model consistently dominates the entire workflow, and response-control profiles expose distinct behavioral patterns across design roles. VEHBench thus provides a stage-aware foundation for evaluating, selecting, routing, and improving verifier-grounded engineering LLMs. The benchmark artifact is available at https://huggingface.co/datasets/AnonymousVehbench/vehbench

Wireless physical neural networks (WPNNs) embed neural computation directly into analog hardware, offering lower energy consumption and latency than conventional digital implementations. In this paper, we propose a deep WPNN in which nonlinear activations are realized by a multi-hop multiple-input multiple-output (MIMO) relay network, in which each relay implements a trainable complex linear gain and bias, followed by the power amplifier's intrinsic nonlinearity acting as an activation function. The cascade of multiple relays therefore realizes an over-the-air fully connected network whose parameters can be trained end-to-end. We develop two transceiver designs for different channel state information (CSI) availability scenarios: a least squares (LS)-based scheme requiring only receiver-side CSI, and a singular-value-decomposition (SVD)-based scheme requiring both transmitter-side and receiver-side CSI. Simulation results show that the proposed architecture enables accurate over-the-air inference for image classification. In particular, the results highlight the advantage of exploiting hardware nonlinearity for enhanced inference capability.

Agentic retrieval-augmented generation (RAG) systems increasingly retrieve external evidence and orchestrate tools for knowledge-intensive applications. In Multi-Hop question answering, agents chain facts across documents. Existing defenses focus on content poisoning, which injects false facts, and prompt injection, which embeds directives. We identify a third attack surface: the salience channel, through which fact position, emphasis, framing, and semantic proximity can redirect reasoning even when all retrieved claims are true and no instructions are present. We formalize Salience Induction as truth-preserving edits that redirect Multi-Hop attribute binding while leaving the retrieval trace semantically intact. We define six Salience-Editing operator classes and build an iterative proposer-verifier pipeline under factual and stealth constraints. We also introduce SalientWiki-MH, a decoy-annotated Multi-Hop benchmark. Evaluations across five frontier model families (GPT, Claude, Gemini, DeepSeek, and Qwen) and three agent architectures (ReAct, Reflexion, and tool-calling) show broad generalization. Under a 30% edit budget, Salience Induction achieves an 83.3% attack success rate; the strongest evaluated baseline defense leaves 75.7% post-defense ASR. Untargeted rewriting further reduces attacks only by degrading neutral task success. Our lightweight input-side defense, Salience Normalization, reduces attack success to 15.3% under standard attacks and 23.6% under an adaptive attack. These results show that truthfulness and instruction filtering alone are insufficient: robust agentic RAG also requires defenses against salience-relevance decoupling.

Medical image segmentation models require both high accuracy and lightweight design to accommodate real-world medical applications. The deployment of these models on resource-limited medical platforms remains a significant challenge due to their high computational and parameter requirements. Existing pruning methods for model compression mostly overlook the intrinsic connections and similarity between the internal structures of complex deep neural networks. As a result, compressed models may not effectively retain the basic features of the pretrained network. To solve this problem, we propose a hierarchical clustering compression method for medical image segmentation models (MIS-HCC). This approach employs hierarchical clustering to partition channels and fuse their parameters efficiently. Specifically, it leverages the Wasserstein distance to represent similarity of channels within layers of pre-trained network, forming a similarity matrix that guides the clustering process. Channels within each cluster are then fused to produce a compressed network. Experimental results on three medical image datasets application demonstrate that MIS-HCC outperforms the state-of-the-art methods in both accuracy and compression efficiency, offering an effective solution for deploying medical image segmentation models on resource-limited medical platforms.

Low-power event-based Analog Front-Ends (AFEs) are essential for building efficient, end-to-end neuromorphic signal processing systems. In this paper, we present an event-based AFE Application-Specific Integrated Circuit (ASIC) optimized for biomedical signal acquisition and encoding. The chip features 32 independently programmable input channels with dual-mode encoding mechanism outputs, comprising Pulse Frequency Modulation (PFM) and adaptive Asynchronous Delta Modulator (aADM) circuits. The aADM encoder provides an auto-scaling mechanism that adapts the encoding data-rate based on the input signal envelope in real-time, enabling very high data compression for low-power information transmission. This approach paves the way toward adaptive wireless communication of neural signals for on-line processing in brain-computer interfaces. Fabricated in a 180 nm CMOS process, the proposed ASIC offers a highly configurable interface compatible with state-of-the-art Spiking Neural Network (SNN) neuromorphic processors.

A score on a temporal video question answering benchmark is meant to measure that a model has temporal understanding, but it conflates two questions. 1. The task question: is the question even temporal, does it need several frames and their order? and 2. The channel question, when it does, does the model recover the order from the pixels, or read it off the positional encoding (RoPE)? Most of a temporal score answers neither, a single frame and answer priors often carry it. The field's validity checks, frame-shuffle sensitivity and the accuracy gained from the full video, speak only to the task question. We contribute a label-free screen for the channel question, the reversal-drop: the accuracy lost when the visual sequence is reversed while RoPE remains forward. It can be applied to compatible temporal benchmarks without new annotations. Paired reverse labels, or tasks whose labels transform deterministically under reversal, distinguish models that follow reversed content from those merely disrupted by the conflict. Molmo2 answers the forward event reading order off positions, while Qwen3-VL answers the reversed event it actually sees, reading visual order (comparatively). We call them position-dominant and visual-sequence-dominant. The split holds across two benchmarks and several temporal tasks at two scales, and activation patching shows it is a real internal property, not an artifact of the conflict. The distinction matters, the two channels fail on opposite inputs so two models with similar score are not interchangable, i.e. an aggregate score does not reflect potential failure modes.

Intercomprehension refers to partial intelligibility of an unfamiliar language (L2) by a speaker of a related language (L1). How is this zero-shot cross-language comprehension possible? In this work, we extend past work on algorithmic models of noisy-channel inference to model intercomprehension in a Bayesian framework. The model uses an LM in L1 only for scoring latent hypotheses about the translations of observed L2 utterances, and a general-purpose noise model to infer a mapping between L2 and L1 words based on either form-based similarity or symbolic rules. We then conduct a human behavioral experiment, eliciting inferences for utterances in Dutch, Italian, and Ukrainian from speakers of English, Spanish, and Russian, respectively. Our full model shows a closer alignment to the distribution of human intercomprehension performance than ablations, and also compares favorably to zero-shot prompting of much larger models. These results provide a cognitively plausible computational model of intercomprehension, and highlight the flexible inferences made by comprehenders under wide uncertainty in real-world cross-language scenarios. We share our code publicly.

The choice of Modulation and Coding (MCS) type for a particular channel condition is made through link adaptation (LA) algorithms that operate at the MAC layer. These algorithms rely on the ACK/NACK statistics and the channel quality index (CQI) feedback. Several existing works model LA as a multi-armed bandit (MAB) problem across cellular and Wi-Fi links. In the MAB formulation, each available MCS is a Bernoulli arm parameterized by its transmission success probability, and the goal is to design a selection strategy that accrues maximum reward. Several popular MAB algorithms, such as upper confidence bound (UCB) and Thompson Sampling (TS), have been proposed in the literature. Using the fact that MCS success probabilities are ordered, we propose the Joint-Thompson Sampling (Joint-TS) algorithm. Unlike classical TS, which assumes independent Beta distributions for each arm, Joint-TS utilizes a multivariate ordered Beta distribution as the prior to preserve the inherent monotonicity of success probabilities. Our simulation results show that while existing MAB algorithms fail in specific scenarios, Joint-TS delivers competitive throughput with robust, consistent performance in all scenarios.

For close-contact human-robot interaction (HRI), trunk-like continuum manipulators provide a physical channel for diverse whole-body expression, but grounding open-vocabulary responses into such robots is difficult: end-effector motion underspecifies body shape, whereas direct whole-body commands are high-dimensional and hard to keep feasible. We propose a whole-body semantic-to-actuation grounding framework for elephant-inspired soft-trunk HRI based on lightweight flow matching. The framework converts responses from a multimodal large language model into bounded, morphology-aligned intent-intensity tuples, parameterizes tendon-actuation trajectories with compact Catmull-Rom spline controls, and uses a rectified-flow generator to sample feasible whole-body trunk motions. Experiments show that the proposed framework improves held-out grounding correctness from 25.0% to 77.2% over a raw-response dense-regression baseline. Compared with a denoising-diffusion baseline, it improves correctness from 71.9% to 77.2% and reduces inference time from 7.86 ms to 4.87 ms while preserving motion diversity. A 100-participant physical HRI study further shows that adding the generated soft-trunk motion channel increases the positive overall-satisfaction rating from 46% to 82% over the audiovisual-only baseline.

We develop an enhanced in-context learning (ICL) framework to improve the performance of pilot-based beamforming in multi-user multiple-input single-output (MU-MISO) systems. The proposed scheme integrates the ICL-Transformer backbone with the pilot encoder-decoder network (EDN) and the beamformer EDN. A crucial feature of our ICL network is that it can handle multiple channel models without retraining, enabled by the construction of model-specific context datasets. To improve convergence and robustness, we introduce three key innovations: (a) a curriculum learning (CL) strategy that smoothly transitions from supervised LMMSE-labeled imitation to unsupervised sum-rate maximization, (b) a self-evolving mechanism that dynamically expands and refines the context datasets for all channel models during CL-based training, and (c) a mismatch-aware extension that incorporates several mismatches into the general ICL framework and bypasses explicit channel calibrations. Ablation studies validate the effectiveness of the in-context architecture and enhanced training strategies. Simulation results over diverse communication environments show that the proposed scheme is able to rapidly adapt to both seen and unseen channel models without gradient-based parameter updates, and can mitigate the mismatch issues via intelligent context constructions. Furthermore, our scheme consistently outperforms the existing beamforming schemes under pilot-based settings, including the WMMSE benchmark and the recent Transformer-based methods.

Layout-based 3D scene synthesizers place each object using two human-annotated channels: a categorical class label and a canonical-pose convention. We ask whether a single self-supervised token derived from object geometry can replace both, and study such tokens directly as a representation, decoupled from any synthesizer. A Finite Scalar Quantization (FSQ) point-cloud autoencoder is chamfer-trained on placed 3D-FUTURE furniture with no labels or pose annotations. Diagnostic probes recover fine-category (62.6 +/- 0.5%), super-category (85.6 +/- 1.3%), and yaw (52.7 +/- 0.5 deg) from the codes alone. Swapping the chamfer target from the rotated to the un-rotated point cloud collapses the yaw signal while raising class recovery, showing the codes' rotation content can be set by the training objective. Scaling across asset libraries needs codes that transfer; on an unseen dataset (ShapeNet), alignment is category-dependent: box-like furniture transfers, organically-shaped furniture does not, and a target-blind augmentation partly closes the gap.

Routing policies for multi-model systems are evaluated almost exclusively on task accuracy and inference cost. We argue that two properties, orthogonal to performance, determine whether routing is meaningful. First, the society of actors must be behaviourally differentiated: if all actors respond identically, routing is vacuous. Second, the routing policy must be stable: surface-form variants of a query should be assigned to the same actor. High task accuracy is compatible with violating both properties, since a router can operate over a redundant society or assign queries inconsistently, preventing specialisation regardless of performance. We adapt Hierarchic Social Entropy (HSE) to language-model societies and introduce a perturbation-based robustness metric to diagnose these failure modes. Applied to EmbedLLM and RouterBench, we find that HSE exhibits strong diminishing returns, suggesting that a curated subset of fewer than ten agents recovers most available diversity in a large pool -- a practical coreset heuristic for society design. We further find that KNN routers gain accuracy from specialist societies but collapse in robustness under perturbation, while prompted routing remains stable across all perturbation types -- illustrating that accuracy and meaningfulness can sharply diverge.

Narrowband interference (NBI) severely degrades orthogonal frequency-division multiplexing (OFDM) systems by corrupting subcarriers and rendering classical soft demodulation ineffective. Conventional compressed-sensing (CS) mitigation exhibits high sequential latency and leaves structured, non-Gaussian residuals that cause log-likelihood ratio (LLR) unreliability, decoder saturation, and severe error floors when employing classical Gaussian demappers. We resolve this pipeline mismatch using a unified deep learning framework for joint NBI cancellation and robust soft demodulation. First, NBI-CNet employs a physics-informed convolutional architecture to estimate NBI parameters and remove multi-tone interference in a single forward pass. Without requiring prior knowledge of the active interferer count, NBI-CNet reduces computational complexity by up to 60% ($N{=}2048, Q{=}64$) compared to the state-of-the-art EOMP-IDS algorithm. Second, LLR-CNet acts as a structural whitener by mapping non-Gaussian post-mitigation residuals onto well-calibrated soft metrics. Simulations demonstrate that this joint framework eliminates the error floors inherent to traditional baselines across dense grids. Under severe interference ($\text{SIR}{=}{-}10$ dB), the pipeline operates within a $0.2$ to $0.5$ dB SNR margin of the optimal iterative baseline at a target block error rate (BLER) of $10^{-4}$. Under mild interference ($\text{SIR}{=}10$ dB) with heavy spectral overlap ($Q{=}12$), where classical greedy algorithms erroneously subtract valid data components and corrupt the payload, NBI-CNet avoids signal-peak confusion to deliver a coding gain exceeding $3$ dB. Finally, the architecture circumvents the $2{\times}10^{-4}$ error floor triggered by interferer-estimation errors, while its scale-invariant design enables robust generalization across arbitrary FFT sizes without retraining.

LLM agents reach users through resellers, who may rebrand a developer's agent or substitute a cheaper model. When provenance is disputed, attribution rests on the trajectory log (the record of tool calls, observations, and executed actions, not the model's reasoning), which the reseller stores and processes to meter usage. A watermark must therefore survive an adversary with full read/write access to the very evidence it is detected from; existing agent watermarks do not, as their attribution is read straight off that log. We present TRACE, to our knowledge the first agent watermark that is distortion-free in its action choices, self-synchronizing under deletion, and unconditionally invariant under rewriting. Deletion desynchronizes a position-derived key and rewriting alters content, so a deletion-robust key must come from content and a rewrite-robust key from position, and no single key serves both. A trajectory, however, has room for two watermarks. TRACE superposes a selection channel that sets which action is chosen, keyed on local content with a distortion-free sampler, so the agent's distribution is provably unchanged and detection resynchronizes after deletions, and a tally channel that sets how many records each decision group holds, keyed on the log's skeleton alone, which no rewriting can touch. We prove this behavioral watermark's signal is bought with decision entropy, each decision paying at least half its entropy and deterministic decisions nothing, and that erasing both channels forces the reseller to corrupt the trajectories it resells. On ToolBench and ALFWorld, TRACE matches the unwatermarked agent's success rate while its selection channel reaches detection scores near z = 100 on long-horizon trajectories, stays detectable under 70% step deletion, and keeps a tally channel exactly unchanged under LLM rewriting of any strength.

Federated Learning (FL) empowers multiple clients to collaboratively learn a model, enlarging the training data of each client for high accuracy while protecting data privacy. However, when deploying FL in real-time edge systems, the heterogeneity of devices among systems has a severe impact on the performance of the inferred model. Existing optimizations on FL focus on improving the training efficiency but fail to speed up inference, especially when there is a latency constraint. In this work, we propose Collate, a novel training framework that collaboratively learns heterogeneous models to meet the latency constraints of multiple edge systems simultaneously. We design a dynamic zeroizing-recovering method to adjust each local model architecture for high accuracy under its latency constraint. A proto-corrected federated aggregation scheme is also introduced to aggregate all heterogeneous local models, satisfying the latency constraint of different systems with only one training process and maintaining high accuracy. Extensive experiments indicate that, compared to state-of-the-art methods and under a latency constraint, our extended models can improve the accuracy by 1.96% on average, and our shrunk models can also obtain a 3.09% accuracy improvement on average, with almost no extra training overhead. The related codes and data will be available at https://github.com/ntuliuteam/Collate

Minimum Bayes Risk (MBR) decoding yields more robust and higher-quality text generation than maximum a posteriori (MAP) decoding by selecting hypotheses that maximize expected utility over sampled pseudo-references. However, there exists a discrepancy in the design: hypothesis selection calculates expected utility scores conditioned on given pseudo-references, while commonly used evaluation metrics, e.g., BLEU and COMET, are asymmetric. Therefore, it is important to consider both hypothesis-to-reference and reference-to-hypothesis directional effects. In this study, we introduce a noisy channel decomposition of MBR decoding that naturally incorporates bidirectional effects to account for these asymmetries. We decompose MBR decoding into four interacting components: hypothesis-to-reference likelihood, reference-to-hypothesis likelihood, hypothesis prior, and reference prior. This decomposition provides a unified interpretation of existing MBR variants and enables metric- and task-specific interpretability by isolating the contribution of each channel. Our comprehensive analysis reveals that channel-wise contributions exhibit distinct characteristics across metrics while remaining consistent across tasks, and suggests that appropriate channel weighting may lead to improvements over original MBR decoding.