Continuum Robot Control

Follow this topic Ask about this topic

Momentum

9 papers in the last four weeks, against 2 the four weeks before. 0.1% of all new papers.

Jul 13Week of Sep 28

Latest papers 43

Sep 30, 2026cs.RO

Magnetic based In-situ Self 3D Pose Estimation for a Modular Soft Tendon-Driven Continuum Robot via IMU-Fusion

Continuum robots are well suited for gentle manipulation because of their inherent compliance and ability to adapt to complex environments. However, their continuously deformable structure makes accurate configuration estimation challenging, particularly when external vision systems are unavailable or obstructed. In this work, we present an embedded pose sensing framework that combines inertial measurement units (IMUs) and active magnetic fields to estimate the robot configuration without relying on external cameras. The angular measurements from the IMU and magnetic-field references are fused to improve local orientation estimation and reduce accumulated orientation error during operation. This pose sensing scheme achieves an update rate of 16.7~Hz, allowing real-time feedback. The proposed system is experimentally validated through closed-loop control, where the estimated robot configuration is used to maintain the end-effector at a desired position while interacting with an object. These results demonstrate the potential of distributed magnetic--inertial sensing for real-time pose estimation and closed-loop control of continuum robots.

Zheng Cao, Guo Ning Sue, Xiangyun Bu +3

Carnegie Mellon University

Continuum Robot Control Robot State Estimation Soft Robotics Multimodal Sensor Fusion

Sep 29, 2026cs.RO

Closed-Form Cartesian Forward Kinetostatics for Spatial Multi-Segment Tendon-Driven Continuum Robots

Forward kinetostatics of spatial tendon-driven continuum robots typically requires a nonlinear equilibrium solve for each actuation input. This paper develops a force-to-Cartesian-configuration model with a closed-form solution in quadratures for spatial multi-segment robots under tendon actuation. The Cartesian backbone centerline and accumulated material twist serve as generalized coordinates, from which the strain measures and tendon geometry are derived. Variational equilibrium yields explicit axial and bending relations and establishes zero equilibrium material twist within the proposed model for admissible longitudinal non-helical routing. The solution is propagated segment by segment without an iterative equilibrium solve, while retaining axial deformation, spatially varying axial and bending stiffnesses and tendon-routing diameter, and segment-dependent tendon participation. Numerical comparisons with a full-strain geometric variable-strain model (GVS) yield maximum length-normalized tip-position discrepancies of 8.91 x 10^-6 and 1.01 x 10^-5 for the single- and three-segment robots, respectively. Mean evaluation times of 1.52 μs and 2.94 μs, with corresponding speedups of approximately 1864x and 3348x over the baseline, demonstrate the computational advantage of the explicit force-to-configuration mapping in the reported benchmark.

Ke Wu, Fangju Yang, Xiaohui Zhang +4

Robotics Continuum Robot Control Tendon-Driven Actuation

Sep 24, 2026cs.RO

A Support-Enhanced Granular-Jamming Gripper for RL-based Grasping with Continuum Manipulators

Continuum manipulators provide dexterous motion in confined spaces, but structural compliance, hysteresis, and load-dependent deformation leave residual position and orientation errors that can undermine reliable contact with rigid grippers. To address this limitation, this paper presents a lightweight support-enhanced granular-jamming gripper tailored to a continuum manipulator. The gripper maintains compliance before jamming while establishing a direct load path to the continuum manipulator tip after jamming. To improve its grasping performance, we systematically designed membrane materials, particles, filling ratios, and the internal support structure, and further identify geometry-dependent grasp boundaries with respect to contact offset and object shape. Building on these results, we construct a physical manipulation system integrating the continuum manipulator, granular-jamming gripper, visual feedback, tendon actuation, and pneumatic control. We then train a reinforcement-learning-based reaching controller in a randomized simulation and deploy it on the physical system, demonstrating how positioning control and contact level mechanical adaptation can complement each other in a modular grasp-and-release task. By introducing an adaptive structure that relaxes the need for highly accurate modeling and positioning control, this work explores a design paradigm that integrates physical and embodied intelligence.

Danyu Liu, Tianlin Zhang, Wei Chen +3

Robotic Grasping Continuum Robot Control

Sep 22, 2026cs.RO

Optimize, Learn, Refine: Whole-Body Grasping and Pick-and-Throw with a Spiral Soft Robot

Soft continuum robots can exploit distributed compliance for whole-body manipulation, but synthesizing behavior through changing contacts remains difficult. We address whole-body grasping and pick-and-throw from an initially ungrasped state through outcome-based actuation-space optimization. Grasping is quantified by tip angular sweep and body-object enclosure, while throwing further incorporates release-direction alignment and minimum release speed. These objectives allow grasping, acceleration, and release to emerge from compliant interaction without prescribing contact forces, contact locations, or body configurations. Because the resulting actuation-to-outcome mapping is nonsmooth, we utilize derivative-free CMA-ES within an optimize-learn-refine framework. CMA-ES generates solutions for sampled conditions, a task-conditioned predictor learns warm starts, and CMA-ES refines them for unseen conditions. In simulation, the method achieves 492/500 successful grasps (98.4%) and success rates of 98%, 97%, and 94% across three directional throwing trials. Learned initialization increases grasping success from 78.6% to 98.4% while reducing the median rollout count from 1184 to 816 in CMA-ES. Hardware experiments achieve a 100% grasping success rate across 50 executions and a 100% pick-and-throw success rate across 30 executions, with 10 repetitions per direction. Together, these simulation and hardware results demonstrate the effectiveness of the proposed framework across both simulated and physical whole-body manipulation tasks.

Marwah Basuhai, Tingcong Liu, Ibrahim Alsarraj +2

Robotic Grasping Whole-Body Robotic Manipulation Robotic Manipulation Dynamic Robotic Manipulation Continuum Robot Control Derivative-Free Optimization+1

Sep 21, 2026cs.RO

Cosserat Modeling of Trimmed Helicoid Soft Arms with a Separated-Section Constitutive Law

Cosserat rod models for soft robots usually construct sectional stiffness by summing material properties over a common cross-section. This assumption becomes inaccurate for trimmed helicoid arms, where load-bearing helix domains are separated and connected only through sparse fused crossings. This paper formulates a separated-section constitutive law that evaluates each helix domain in its local frame and pulls its constitutive response back to the backbone, yielding an effective backbone stiffness. Sparse-fusion mechanics captures the additional compliance caused by relative motion between neighboring domains and determines channel-wise reduction profiles

η_c(s/L)

for bending, torsion, and extension. The resulting effective sectional stiffness is strongly anisotropic: bending and extension are reduced by about one order of magnitude, whereas torsion remains close to the effective backbone stiffness. The resulting sectional law is embedded in a geometrically exact dynamic Cosserat model with GVS discretization and routed-tendon actuation. Across 103 measured configurations, the three datasets give pooled normalized position errors of \SI{7.7}{\percent}, \SI{6.7}{\percent}, and \SI{7.8}{\percent}, while each full-arm solve requires approximately \SI{0.3}{s} on one CPU core (Intel Xeon, Cascade Lake, \SI{2.8}{GHz}), enabling rapid model-based planning, state and load estimation, and morphology--control co-design for architected soft robots.

Zhihang Qin, Linxin Hou, Zeyu Zhong +9

Department of Mechanical Engineering, College of Design and Engineering, National University of Singapore, Singapore · Advanced Robotics Centre, National University of Singapore, Singapore · Department of Electrical and Computer Engineering, National University of Singapore, Singapore +2

Structural Mechanics Continuum Robot Control Soft Robotics

Sep 21, 2026cs.RO

Estimation and Control of Tensegrity Manipulator Kinematics based on Strut Inclination Angles

Unlike conventional rigid-link robots defined by discrete joints, continuum robots pose a fundamental challenge for expressing their complex continuous bending configurations for closed-loop control. Several modelling approaches have been proposed for conventional continuum robots, but tensegrity-based continuum robots remain largely open. Moreover, many of these approaches assume a continuous elastic backbone and are therefore not directly applicable to tensegrity manipulators, whose bodies are networks of rigid struts and tensioned cables. This work presents a reduced-order model for shape and posture control of a tensegrity-based continuum manipulator. The manipulator is modelled as a serially connected parallel-link mechanism. The proposed method is formulated as an optimization problem that uses geometric constraints of the tensegrity structure together with information from the Inertial Measurement Unit (IMU) sensors embedded in the strut elements. To the best of our knowledge, this work presents the first experimental demonstration of a real-time IMU-based shape estimation method on a full-scale tensegrity manipulator and demonstrates posture control using a simple Proportional-Integral (PI) controller. The results show that the proposed method can estimate the shape of both single-module tensegrity structures and multi-module tensegrity manipulators from arbitrary static configurations and achieve desired postures.

Tufail Ahmad Bhat, Shuhei Ikemoto

Kyushu Institute of Technology, Japan

Robotic Control Robotics Continuum Robot Control Robot State Estimation

Sep 21, 2026cs.RO

Safety Control of a Hyper-redundant Robot via Adaptive Weighted Control Barrier Functions

Hyper-redundant robots are well suited for confined-space manipulation due to their high dexterity, but safe operation in cluttered environments remains challenging. In addition, their slender structures often lead to uneven load distributions and nonuniform tracking errors along the body. To address these issues, this work proposes a weighted control barrier functions (W-CBFs) framework that enforces safety constraints while reducing tracking errors caused by uneven loading. The proposed controller was first evaluated on a circular path-following task under different obstacle configurations. With fixed weights, compared to the non-weighted method, the maximum reduction in root-mean-square (RMS) tracking error was 59.6% in simulation and 87.7% in physical experiments. An adaptive weighting strategy was then investigated based on the discrepancy between simulated and experimental performance under different mapping functions. The RMS errors were further reduced by 21.9% and 8.5%, respectively, although the error increases when obstacles were located close to the robot body. Finally, the robot was evaluated in a cleaning task requiring coverage of a rectangular area and compared with manual teleoperation. Although the controller was not explicitly optimized for area coverage, the autonomous strategy achieved comparable or better coverage performance while avoiding collisions with the surrounding frame, whereas collisions occurred during manual operation.

Zijian Cai, Kiwan Wong, Wenci Xin +3

Singapore-MIT Alliance for Research and Technology (SMART) Centre, Singapore · CSAIL, Massachusetts Institute of Technology, Cambridge, USA · School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore +1

Robot Trajectory Tracking Control Barrier Functions Continuum Robot Control Robot Collision Avoidance

Sep 19, 2026cs.RO

Prescribed-Time Contracting-Boundary Control of a Tendon-Driven Flexible Arm

This study develops a prescribed-time performance-shaping control method for curvature tracking of a single-segment flexible arm actuated by three antagonistic tendon pairs. A Cartesian curvature representation is introduced to avoid the undefined bending direction at the straight configuration and to establish an explicit six-tendon kinematic mapping. A cubic performance boundary contracts smoothly from an initially admissible error bound to a nonzero terminal accuracy bound within a prescribed time. Based on this boundary, a dual transformation combining static symmetric error scaling and time-varying behavior shaping maps the tracking error into a fixed unit box. The resulting controller guarantees boundary invariance, prescribed-time entry into the terminal accuracy region, and subsequent asymptotic convergence. Numerical evaluations with Python and OpenCR--MuJoCo, together with a supervised reduced-order experiment on a two-section, four-channel platform, provide complementary validation. Across six experimental trials, no violation of the prescribed boundary is observed, and the proposed controller reduces the mean terminal curvature RMSE by 32.5% relative to a matched baseline, with comparable terminal-band entry times. These results support the feasibility of the proposed approach in the reduced-order experimental setting.

Yi Lu, Chao Tang, Zhiji Han +1

School of Information Management, Hubei University of Economics, No. 8 Yangqiaohu Road, Canglongdao Development Park, Jiangxia District, Wuhan, 430205, China · College of Engineering, Ocean University of China, No. 1299 Sansha Road, Qingdao West Coast New Area, Qingdao, 266404, China

Robot Trajectory Tracking Feedback Control Continuum Robot Control

Sep 16, 2026cs.RO

Geometric Shortcuts for Complex Trunk Postures: Dual-Helicity Coupling Enables Low-Dimensional Control

How do elephant trunks generate complex postures without relying solely on fine segmental activation? We propose that part of this complexity arises from a low-dimensional geometric shortcut: dual-helicity coupling between opposite-handed oblique muscles. In a simplified soft-robotic prototype, varying only two geometric parameters generates a broad library of elephant-like postures, suggesting a dual-layer control architecture with implications for continuum robot design and biological hypotheses.

Huishi Huang, Danlu Chen, Matteo Lo Preti +3

Advanced Robotics Centre (ARC) and with the Department of Mechanical Engineering, College of Design and Engineering, National University of Singapore (NUS), 117608, Singapore. · Institute of High Performance Computing (IHPC), Agency for Science, Technology and Research (A*STAR), 138632, Singapore.

Mechanism Design Continuum Robot Control Soft Robotics

Sep 2, 2026cs.RO

Real-Time Shape Control of Multi-Segment Soft Robotic Arms Using Koopman Operators with Global and Local Observables

Multi-segment soft robotic arms can continuously reconfigure their body shapes for safe interaction, but tip control alone is insufficient for constrained-space tasks. Therefore, shape control is a more important task for multi-segment soft arms than tip control, but remains challenging due to the high dimensionality and nonlinear dynamics of continuum deformation. In existing work, shape control accuracy is defined by the error in the global frame (global shape error). For multi-segment soft arms, using only global shape error as the control objective is insufficient, as segment coupling, gravity-induced loading, and inertial effects become more significant. This difficulty increases with the number of segments. In this paper, we present a Koopman-based model predictive control framework that combines global and local observables, enabling real-time shape control on multi-segment soft robotic arms. The framework is evaluated through numerical and physical experiments. Numerical experiments demonstrate the scalability of the proposed controller by achieving shape control on robots with up to 10 independently actuated segments. The physical experiments demonstrate that the controller is capable of (1) real-time shape control of 3- and 5-segment robotic arms with tip speeds up to 0.6 m/s, (2) robust tracking without retraining, including distal payloads up to 400~~g and recovery from a 7~~N lateral disturbance, and (3) the potential for future inspection applications through a confined-space demonstration. These results demonstrate that the proposed framework enables dynamic, scalable, and accurate real-time shape control on multi-segment soft robotic arms.

Jiahe Wang, Eron Ristich, Sultan Haidar Ali +5

Model Predictive Control Feedback Control Continuum Robot Control Soft Robotics

Aug 13, 2026cs.RO

Capstan-driven Continuum Surgical Robot: Design, Modeling, and Perception

Shape and force sensing have long been critical bottlenecks in the development of compact capstan-driven continuum surgical robots, primarily due to the difficulty of obtaining cable tension information within the confined capstan assembly. To overcome these challenges, this paper presents an integrated design-modeling-sensing approach based on the concept of actuation-perception co-design. A compliant element is introduced into the motor mounting bracket of the drive system, enabling micro-deformation under the cable reaction force and thereby allowing real-time cable tension measurement without occupying the compact capstan space. To address the modeling complexity arising from unconventional joint configurations introduced by the spatial cable routing strategy, a parallel computation framework based on a multibody short-thick-beam model is proposed, which captures shear effects in short beam segments and synergistic multi-cable interactions while achieving real-time performance. Building on this framework, stable shape and force sensing is achieved by incorporating a proximal multi-axis force/torque sensor as an additional measurement anchor. Following this design-modeling-sensing framework, capstan-driven continuum surgical robots with single- and dual-segment configurations are developed. Experimental results validate the proposed framework in both single- and dual-segment continuum robots, demonstrating real-time tip pose estimation together with contact force and location perception. By enabling cable tension feedback without compromising the compact capstan architecture, the proposed framework makes integrated perception feasible for capstan-driven continuum surgical robots.

Gang Zhang, Yufu Qiu, Junyan Yan +3

Department of Mechanical and Automation Engineering and T Stone Robotics Institute, The Chinese University of Hong Kong, Hong Kong · School of Mechanical and Electronic Engineering, Wuhan University of Technology, Wuhan 430070, China · state Key Laboratory of Intelligent Manufacturing Equipment and Technology, Huazhong University of Science and Technology (HUST), Wuhan, China +1

Continuum Robot Control Robot State Estimation Surgical Robotics

Aug 6, 2026cs.RO

SoRoMoX: Fast, Differentiable, and Parallelizable Soft Robot Models

Reduced-order models based on Cosserat-rod theory are now well established, and modeling theory is no longer the primary bottleneck in soft-robot control. Their implementations, however, do not support the differentiable, GPU-parallel, and control-oriented workflows that underpin advanced rigid-robotics applications. Here, we fill this gap with SoRoMoX (Soft Robot Models in JAX), a fully numerical, JIT-compilable Python/JAX framework. SoRoMoX implements articulated, Piecewise Constant Strain, and Variable Strain models through a unified, control-ready interface that provides inertia matrices, gravitational and elastic forces, Jacobians, and their derivatives. To our knowledge, it is the first rod/strain-based soft-robot modeling framework that runs directly on GPUs, with Warp kernels accelerating parallel continuum-model execution, and is end-to-end differentiable with respect to states, inputs, and parameters. Sequential CPU rollouts are up to 27.0 times faster than SoRoSim, while GPU-parallel GVS rollouts increase throughput by up to 679.7 times. This performance enables workflows that were previously impractical or impossible: static-equilibrium system identification with 66% lower marker RMSE; residual-force learning with a further 64% reduction; computed-torque tracking with RMSE reduced by a factor of approximately 500 relative to model-free PD; control-gain optimization with up to 98% lower loss than untuned gains; safety-constrained control using high-order control barrier functions to keep the peak contact force within a prescribed 5 N bound, compared with 33.5 N without the safety constraint; and reinforcement-learning policy training up to 7 times faster than a CPU PyElastica discrete-rod baseline through massively parallel rollouts.

Maximilian Stölzle, Solange Gribonval, Daniel Feliu-Talegon +9

Delft University of Technology, Delft, The Netherlands · Italian Institute of Technology, Genoa, Italy · Massachusetts Institute of Technology, Cambridge, MA, USA +1

Differentiable Physics Continuum Robot Control Soft Robotics Physics-Based Simulation

Aug 4, 2026cs.RO

Active Stiffness Control of a Supportive Continuum Robot

Supportive continuum robots (SCRs) enhance the load-bearing capability of an operative continuum robot by mechanically coupling it with a supportive arm. However, their passive stiffness is determined by the mechanical configuration and cannot be adjusted online for varying payloads or interaction forces. Active stiffness control is therefore needed to regulate the load response and maintain positioning accuracy. Meanwhile, the closed-chain structure introduces kinematic constraints that complicate task-space regulation and stiffness control. This paper presents an active task-space stiffness control framework for a tendon-driven SCR. An existing geometric variable strain model describes the closed-chain dynamics, which are projected onto the constraint-consistent motion subspace. A projected sliding mode controller regulates the operative arm tip while preserving the constraints, and closed-loop stability is established through Lyapunov analysis. After position regulation, active apparent stiffness is introduced through a virtual Cartesian spring based on position-error feedback to shape the force--displacement response. The framework is evaluated in simulation and experimentally validated under prescribed external loads and different desired configurations. Results show that increasing the commanded stiffness gain reduces load-induced tip deflection and increases apparent directional stiffness, thereby improving load resistance and positioning robustness under external loading.

Rana Danesh, Farrokh Janabi-Sharifi, Farhad Aghili

Department of Mechanical, Industrial, and Mechatronics Engineering, Toronto Metropolitan University, Toronto, ON, Canada · Department of Mechanical, Industrial and Aerospace Engineering, Concordia University, Montreal, QC, Canada

Robotic Control Robust Control Continuum Robot Control Sliding Mode Control

Jul 27, 2026cs.RO

Input Shaping for Point-to-Point Motion with a Continuum Robot Arm

A cable-driven continuum robot arm is an underactuated mechanism and may suffer residual vibration at the end of a rest-to-rest maneuver. In this work, a time-delay filter is applied as an input shaper to the system to eliminate the excitation of vibratory modes. A non-robust and a robust time-delay filter are designed based on a linear system model and demonstrate improved response compared to a velocity-driven pulse input. Experimental results using the continuum robot validate the application of the input shaper, with reduced overshoot and settling time exemplifying the reduction in oscillation at the end of the maneuver. It is also shown that utilizing the robust shaper further improves the response of the arm in comparison to applying the non-robust shaper. These results are significant towards the precise and robust implementation of continuum robots in applications involving arbitrary end-effector trajectories.

Rodolfo Hdz. Ibarra, Karan Baker, Parsa Molaei +2

Department of Mechanical and Industrial Engineering, Louisiana State University, LA 70803, USA

Robust Control Continuum Robot Control

Jul 27, 2026cs.RO

Moving-Horizon Estimation and Nonlinear Model Predictive Control of Cable-Driven Soft Manipulators

Precise control of soft manipulators remains challenging due to the difficulty of developing accurate yet computationally tractable models for model-based estimation and control. Reduced Cosserat-rod models provide a physics-based and control-oriented description of soft-robot dynamics, offering an explicit alternative to purely data-driven input-output representations. In this paper, we propose a moving-horizon estimation (MHE) and nonlinear model predictive control (NMPC) framework for cable-driven soft manipulators based on reduced Cosserat dynamics. A smooth cable-length-driven modeling formulation is developed by approximating the complementarity relationship between cable tension and cable slackness, enabling cable-length control without direct tension sensing. Based on this formulation, an MHE method is introduced to estimate the reduced state and reconstruct the manipulator configuration from end-effector pose measurements and cable-length information. An NMPC controller is then formulated to achieve task-space control under cable-length and cable-rate constraints. The proposed framework is validated through numerical simulations and experiments. Simulation results demonstrate the effectiveness of the estimator and controller for pose and strain-related regulation on a multi-cable soft manipulator. Experimental results on a four-cable prototype further show that the proposed MHE-NMPC scheme can be implemented in real time and enables accurate end-effector position tracking through cable-length control.

Lingxiao Xun, Haihong Li, Gang Zheng

Nonlinear MPC Continuum Robot Control Robot State Estimation Soft Robotics

Jul 21, 2026cs.RO

Eversion-based robots can enable safe access,steering and endoscopic imaging within the spinal subarachnoid space

Safe navigation within the spinal subarachnoid space is constrained by its narrow, compliant, and delicate anatomy. Conventional catheters and continuum robots rely on proximal pushing, generating friction and shear along the tissue device interface that limit distal controllability and increase the risk of neural injury. Here, we present a 2 mm diameter eversion-growing robotic platform that enables friction minimised extension and steering within the human spinal subarachnoid space, validated through computational modelling, phantom experiments, and intact human cadaver studies. The robot integrates a miniature endoscope for real time intrathecal visualisation and advances by pressure driven tip eversion, localising motion to the distal tip while minimising translational sliding of the deployed body. Phantom experiments demonstrated reductions of 65.2% in mean interaction force and 48.0% in peak interaction force compared with matched push-based insertion. Physics based modelling showed that eversion based growth redistributed tissue loading, reducing local stress concentrations and interfacial shear relative to conventional insertion. In an intact human cadaver, the system achieved 150 mm of controlled intrathecal extension with concurrent fluoroscopic and endoscopic visualisation, providing access across multiple vertebral levels from a standard lumbar entry point. Postprocedural laminectomy and durotomy revealed no observable macroscopic disruption of the dura mater or surrounding neural structures. These results provide the first mechanically characterised and multimodally validated demonstration of eversion-based robotic navigation in intact human spinal anatomy, establishing a quantitative and procedural foundation for future intrathecal interventions. Further validation in larger anatomical cohorts and under physiological conditions will be required before clinical translation.

Zicong Wu, Panagiotis Kalozoumis, S. M. Hadi Sadati +8

Department of Surgical & Interventional Engineering, School of Biomedical Engineering & Imaging Sciences, Faculty of Life Sciences & Medicine, King’s College London, London WC2R 2LS, United Kingdom · Department of Computer Science & Biomedical Informatics, University of Thessaly, Lamia 35131, Greece · School of Engineering and Materials Science, Queen Mary University London, London E1 4NS, United Kingdom +2

Robot Navigation Robotic Insertion Continuum Robot Control Soft Robotics Surgical Robotics

Jul 13, 2026cs.RO

Whole-Body Semantic-to-Actuation Grounding of Elephant-Inspired Soft-Trunk Motion via Lightweight Flow Matching

For close-contact human-robot interaction (HRI), trunk-like continuum manipulators provide a physical channel for diverse whole-body expression, but grounding open-vocabulary responses into such robots is difficult: end-effector motion underspecifies body shape, whereas direct whole-body commands are high-dimensional and hard to keep feasible. We propose a whole-body semantic-to-actuation grounding framework for elephant-inspired soft-trunk HRI based on lightweight flow matching. The framework converts responses from a multimodal large language model into bounded, morphology-aligned intent-intensity tuples, parameterizes tendon-actuation trajectories with compact Catmull-Rom spline controls, and uses a rectified-flow generator to sample feasible whole-body trunk motions. Experiments show that the proposed framework improves held-out grounding correctness from 25.0% to 77.2% over a raw-response dense-regression baseline. Compared with a denoising-diffusion baseline, it improves correctness from 71.9% to 77.2% and reduces inference time from 7.86 ms to 4.87 ms while preserving motion diversity. A 100-participant physical HRI study further shows that adding the generated soft-trunk motion channel increases the positive overall-satisfaction rating from 46% to 82% over the audiovisual-only baseline.

Tingcong Liu, Tongshun Chen, Siyi Ma +6

Robot Motion Generation Continuum Robot Control Language-Conditioned Robot Control Human-Robot Interaction Soft Robotics

Jul 7, 2026cs.RO

A Continual Learning Framework for Adaptive Control of Modular Soft Robots

Soft robots have attracted significant attention in applications such as medical intervention, rehabilitation, and robotic manipulation due to their inherent compliance, flexibility, and high degrees of freedom. Modular soft robots (MSRs), composed of multiple interconnected segments, represent an emerging class of robotic systems with highly deformable and reconfigurable structures capable of performing complex tasks. However, designing controllers for MSRs remains challenging due to their nonlinear dynamics, modeling complexity, and hyper-redundant nature. Existing approaches typically require controllers to be retrained from scratch whenever the robot morphology changes. In this work, we address these challenges through a continual learning inspired control framework capable of incrementally adapting to changes in robot morphology while preserving previously acquired knowledge. Specifically, the proposed framework enables the controller to sequentially learn new MSR configurations without forgetting previously learned ones. In addition, for MSRs with fixed configurations, the same framework can be employed in a distributed manner to learn module-specific dynamics, enabling localized control and improved precision. The proposed approach is validated through closed-loop trajectory tracking experiments in simulation using a tendon-driven soft robot, as well as on a real-world three-module pneumatic soft robotic arm. Furthermore, we demonstrate the adaptive capabilities of the framework through a reaching experiment in which the controller selectively activates only the necessary modules to reach a virtual target position, thereby reducing computational overhead.

Nilay Kushawaha, Muhammad Sunny Nazeer, Baljinder Singh Bal +2

1The BioRobotics Institute, Scuola Superiore Sant’Anna, 56024, Pontedera, Italy · Department of Excellence in Robotics and AI, Scuola Superiore Sant’Anna, 56127, Pisa, Italy · Department of Mechanical Engineering, National University of Singapore, 119077, Singapore +1

Continual Robot Learning Continuum Robot Control Soft Robotics Adaptive Control Robot Learning

Jun 24, 2026cs.RO

Deep Reinforcement Learning-Enhanced Event-Triggered Data-Driven Predictive Control for a 3D Cable-Driven Soft Robotic Arm

Soft robots are challenging to control due to their nonlinear and time-varying dynamics. Data-enabled predictive control (DeePC) offers a model-free alternative by directly leveraging measured input-output trajectories to construct a predictive controller. However, its receding-horizon formulation requires solving a constrained optimization problem at every sampling instant, which can be computationally demanding for real-time deployment on resource-limited robotic platforms. To address this limitation, we propose an adaptive reinforcement-learning-based event-triggered DeePC (RL-ET-DeePC) framework for soft robotic control. A model-free RL policy is trained to determine when to invoke the DeePC optimizer based on the current system state representation, thereby reducing unnecessary optimization calls while preserving closed-loop performance. Simulation results show that RL-ET-DeePC reduces optimization frequency by up to 66% compared to periodic DeePC, while maintaining comparable tracking accuracy. Hardware experiments on a three-dimensional cable-driven soft robotic arm demonstrate zero-shot transfer, achieving a 34% reduction in optimization frequency with tracking accuracy comparable to periodic DeePC and more consistent performance than a static threshold-based event-triggered baseline.

Cheng Ouyang, Moeen Ul Islam, Kaixiang Zhang +3

Department of Agricultural & Biological Engineering, Mississippi State University, MS, USA · Department of Mechanical Engineering, Michigan State University, MI, USA · Department of Electrical and Computer Engineering, Michigan State University, MI, USA

RL Control Robot Trajectory Tracking Model Predictive Control Feedback Control Continuum Robot Control Event-Triggered Control+1

Jun 24, 2026cs.RO

Morphology-Specific Closed-Loop Control of Logarithmic-Spiral Continuum Arms via Online Jacobian Error Compensation

Logarithmic spirals are ubiquitous in biological appendages and provide an attractive morphology for continuum manipulators capable of reaching, wrapping, and grasping. Recently reported logarithmic-spiral robots demonstrated scalable fabrication and versatile grasping but lacked inverse kinematics and closed-loop control. This work presents the first morphology-specific closed-loop task-space control framework for logarithmic-spiral continuum arms. A segmented tendon-driven model with a centerline backbone and equilateral tendon routing is developed in MuJoCo to capture tapered compliance and contact dynamics. An analytical task-space Jacobian is derived directly from the logarithmic-spiral kinematics and combined with online Jacobian error compensation using a Broyden secant update and Kalman-filter estimation. The resulting controller continuously corrects modeling errors arising from nonlinear deformation, contact, and geometric mismatch. The framework is validated through planar and spatial simulations, including trajectory tracking, attitude regulation, disturbance rejection, three-dimensional position tracking, and simultaneous position-orientation control. Compared with a piecewise-constant-curvature (PCC) baseline, the proposed method consistently reduces tracking errors, suppresses attitude drift, and maintains a bounded Jacobian estimation error. The controller is further applied to morphology-enabled manipulation tasks, including obstacle-assisted reach-wrap-release motions, adaptive whole-arm grasping, and cooperative multi-arm object handling. Results demonstrate that combining logarithmic-spiral morphology with online Jacobian compensation enables accurate, robust, and scalable control of highly underactuated continuum manipulators. The proposed framework establishes a physics-grounded baseline for future hardware implementation and learning-augmented soft robotic control.

Partha Datta, Yi Jin, Wei Lin +1

Laboratory for Soft Machines and Electronics, Department of Mechanical and Aerospace Engineering, Case Western Reserve University, Cleveland, OH, USA · Department of Electrical, Computer and Systems Engineering, Case Western Reserve University, Cleveland, OH, USA · Laboratory for Soft Machines and Electronics, Department of Mechanical and Aerospace Engineering, Case Western Reserve University, Cleveland, OH 44106, USA +3

Robotic Control Robot Trajectory Tracking Robotic Manipulation Continuum Robot Control Soft Robotics Adaptive Control

Jun 22, 2026cs.RO

PanoVine: Whole-Body Visuomotor Control for Soft Growing Vine Robot

Vine robots, a class of soft, growing robots, are suitable for navigating complex and confined environments due to their compliant bodies and self-supporting growth mechanism. However, hysteresis, tether interactions, and deformations make them difficult to predict and model, which in turn limits the effectiveness of conventional planning and control approaches. In this work, we present a data-driven, vision-based control framework for the first autonomous vine robot system. Our system integrates 19 cameras distributed along the robot's body to provide comprehensive feedback of both the robot state and the surrounding environment. Using this rich whole-body vision feedback, we train an end-to-end visuomotor policy from demonstrations for closed-loop autonomous control in complex environments. The policy efficiently aggregates information from distributed sensing while maintaining robustness to inaccurate robot states and actuation. Experimental results demonstrate that the learned policy enables robust navigation and manipulation in challenging scenarios, including steering through branched structures, climbing up slopes, traversing unsupported terrain, reaching objects precisely, and maneuvering through confined spaces and obstacles. Project website https://panovine-bot.github.io

Yimeng Qin, Xiaomeng Xu, William Heap +3

Stanford University

Robot Navigation Visuomotor Policy Learning Robotic Manipulation Continuum Robot Control Soft Robotics

Jun 21, 2026cs.RO

Do Rigid-Body Simulators Dream of Soft Robots? Learning Contact-Rich Manipulation for Tendon-Driven Continuum Robots

Learning contact-rich, whole-body manipulation for soft continuum robots is held back by the lack of simulation infrastructure that has accelerated rigid-robot manipulation. Existing soft robot simulators are physically grounded but lack the contact handling, actuation support, or learning integration needed for contact-rich manipulation; rigid-body approximations offer these capabilities but sacrifice physical grounding. We bridge this gap for tendon-driven continuum robots (TDCRs) by deriving a continuum-mechanics-informed discretization that places the soft robot natively inside MuJoCo, unifying tendon forces, body contact, and dynamics in a single physics pipeline. We validate the simulator against a Cosserat rod reference (static and dynamic) and real TDCR hardware. We then train state-based imitation learning policies via teleoperation in simulation and deploy them zero-shot to a physical 3-segment TDCR on a 7-DoF Franka arm across two contact-rich manipulation tasks. To our knowledge, this is the first demonstration of sim-to-real transfer for contact-rich manipulation with continuum robots.

Chengnan Shentu, Nicholas Baldassini, Tongjia Zheng +2

University of Toronto, Canada

Contact-Rich Robotic Manipulation Robotics Simulation Sim-to-Real Transfer Continuum Robot Control Soft Robotics

Jun 19, 2026eess.SY

Discrete Geometric Modeling and Extended State Estimation of Continuum Robots

In this paper, we present a fully discrete approach for the accurate and numerically efficient dynamical modeling and state estimation of continuum robots. The model is based on geometrically exact beams in a minimal, strain-based formulation and derived in the framework of Lie group variational integrators, allowing to preserve important geometric properties that we exploit to achieve high accuracy and numerical efficiency. We then propose a disturbance observer based on an extended Kalman filter formulation that reliably estimates system states as well as model uncertainties and external disturbances. Experiments on a real system validate the accuracy and efficiency of the proposed model and observer.

Maximilian Herrmann, Leander Pfeiffer, Paul Kotyczka

Technical University of Munich, TUM School of Engineering and Design, Munich Institute of Robotics and Machine Intelligence (MIRMI), Chair of Automatic Control.

Continuum Robot Control Robot State Estimation Extended Kalman Filtering

Jun 18, 2026cs.RO

CoLI: A Reproducible Platform for Continuum Robot Learning via Monolithic 3D Printing and Isomorphic Teleoperation

Continuum robots offer strong potential for manipulation tasks due to their high degrees of freedom, compliant structures, and operational safety. However, their adoption in both research and practical applications has been hindered by reproducibility issues arising from complex fabrication and assembly processes, challenging kinematic modeling, and a lack of intuitive control interfaces. To address these challenges, we present a novel open-source continuum robot design. The platform features a simplified fabrication pipeline enabled by multi-material 3D printing, allowing the arm to be fabricated as a monolithic compliant structure with minimal assembly. Control is achieved through an isomorphic teleoperation interface that establishes a direct actuator-level mapping, eliminating the need for explicit kinematic modeling and providing a singularity-free mapping. Building on this hardware design, the platform further supports imitation-learning-based autonomous control. The proposed system is evaluated through hardware characterization and a set of manipulation tasks. Experimental results demonstrate that the platform provides a reproducible, learning-ready continuum robot system, accelerating algorithmic development and systematic benchmarking for the continuum robotics community.

Ziyuan Tang, Chenxi Xiao*

School of Information Science and Technology at ShanghaiTech University, Shanghai, China

Robot Teleoperation Robotic Manipulation Continuum Robot Control

Jun 17, 2026cs.RO

Shape Sensing of Continuum Robots using Direct Laser Writing

Continuum robots offer a promising approach for minimally invasive and natural-orifice surgical procedures due to their inherent compliance and dexterity. However, this flexibility also makes estimating the current shape of the robot challenging. Several approaches have been used to reconstruct the shape of these robots, including imaging, optical sensing, magnetic sensing, and resistive sensing. Strain sensors fabricated using direct laser writing (DLW) could provide an alternative sensing method. This technique involves using a laser to induce carbonization of certain polymers to create graphene patterns, such as strain sensors. In this paper, we demonstrate how a flexible continuum joint and a DLW sensor can be machined as one monolithic structure using the same laser and the same setup. The fabricated sensors are characterized using linear and nonlinear models, which are used to predict the joint angle with error as low as 1.76 degrees. Furthermore, we demonstrate how a DLW sensor can be used to implement closed-loop control in a robotic joint, achieving tracking error under 3 degrees.

Amber K. Rothe, Nidhi Malhotra, Jaydev P. Desai

Medical Robotics and Automation (RoboMed) Laboratory, Wallace H. Coulter Department of Biomedical Engineering, Georgia Institute of Technology, Atlanta, GA 30332 USA

Continuum Robot Control Soft Robotics

May 24, 2026cs.RO

Stiffness Optimization for Concentrated Bending in Magnetically Actuated Catheters: Maintaining Steerability under Gradient Stiffness

Achieving both efficient pushability (propulsion transmission) and proximally concentrated bending for steerability is challenging for magnetically actuated soft catheters: higher axial/bending stiffness improves force transmission but reduces steerability, whereas lower stiffness enables large, proximally concentrated bending yet increases kinking/buckling risk under compressive push loads. To address this trade-off, we propose a stiffness-optimized multi-segment magnetically actuated catheter (SO-MAC) that integrates a decoupled steering-advancement mechanism with a gradient-stiffness architecture. The SO-MAC concentrates bending about a stable proximal pivot during advancement while the distal section passively self-straightens to transmit propulsion, aided by the optimized stiffness distribution and elastic recovery of the spring backbone against friction-induced kinking/buckling. Over

0{-}180^{\circ}

combined steering and advancement, the pivot remained stable and the distal tip advanced near-straight toward the target direction. A 1.5 mm-diameter SO-MAC achieved up to

180^{\circ}

steering with a 3 mm bending radius at its 10 mm tip, with an average shape error of

1.39 \pm 0.56

mm and a steering-pivot error of

0.35 \pm 0.10

mm. Visual feedback control in a bronchial phantom further confirmed robust navigation through highly curved, bifurcating paths.

Jiewen Tan, Junnan Xue, Shing Shin Cheng +3

Harbin Institute of Technology (Shenzhen), Shenzhen, China, 518055 · Department of Mechanical and Automation Engineering and T Stone Robotics Institute, The Chinese University of Hong Kong, Hong Kong · Faculty of Applied Science, Macao Polytechnic University, Macao

Continuum Robot Control Surgical Robotics

May 24, 2026cs.RO

Learning, locomotion, and navigation of soft synthetic snakes in three-dimensional, heterogeneous environments

Limbless terrestrial animals exhibit exceptional locomotor versatility and control, currently unmatched by engineered counterparts. Here, we introduce a computational framework that enables soft synthetic snakes to navigate unstructured, heterogeneous 3D terrains. Our approach is grounded in bio-inspired actuation and sensing models that reduce the control complexity inherent to high-degree-of-freedom, continuum bodies. These models are integrated into a reinforcement learning architecture to derive environment-traversing policies. Training first occurs in simplified, homogeneous terrains to learn locomotion primitives. These are then composed into adaptive strategies for complex landscapes. We demonstrate robustness by deploying a snake in high-fidelity 3D environments reconstructed from real-world imaging, achieving reliable navigation. Overall, this work provides a physically-realistic simulation platform and practical insights for the control of continuum systems in natural terrains.

Xiaotian Zhang, Ali Albazroun, Tixian Wang +3

Carl R. Woese Institute for Genomic Biology, University of Illinois Urbana–Champaign · Department of Mechanical and Aerospace Engineering, Hong Kong University of Science and Technology · Department of Mechanical Science and Engineering, University of Illinois Urbana–Champaign

RL for Robotics Robotics Simulation Terrain-Aware Robot Locomotion Robot Locomotion Continuum Robot Control Soft Robotics

May 18, 2026cs.RO

Neural Operators for Design-Space Surrogate Modeling of Tendon-Actuated Continuum Robots

Continuum robots enable dexterous manipulation in constrained environments, but require accurate and efficient models for real-time manipulation and control. Traditional physics-based models can be computationally expensive and may suffer from inaccuracies due to unmodeled effects, while current learning-based methods often generalize poorly beyond the specific robot on which they are trained. We present a formulation of surrogate modeling for tendon-driven continuum robots as an operator learning problem that maps robot design parameters and tendon actuation inputs to resulting configurations. This formulation enables a single trained model to generalize across a large class of robot designs. We develop four novel neural operator architectures--two based on Deep Operator Networks (DeepONets) and two based on Fourier Neural Operators (FNOs)--and train them on simulation data to predict robot configurations. All architectures achieve good accuracy while allowing for fast and accurate generalization across designs. Our results demonstrate that operator learning provides an effective and generalizable surrogate for continuum robot mechanics in the design space, enabling fast modeling for control, planning, and design optimization in surgical and industrial applications.

Branden Frieden, James M. Ferguson, Alan Kuntz +1

The Robotics Center and the Kahlert School of Computing at the University of Utah, Salt Lake City, UT 84112, USA. · The Departments of Computer Science and Electrical and Computer Engineering at Vanderbilt University, Nashville, TN, 37203, USA.

Neural Surrogate Modeling Fourier Neural Operator Continuum Robot Control Tendon-Driven Actuation Deep Operator Networks Neural Operators

May 18, 2026cs.RO

Data-Driven Dynamic Modeling of a Tendon-Actuated Continuum Robot

Developing dynamic models for tendon-driven continuum robots is challenging due to their nonlinear, high-dimensional, and friction-dominated dynamics. This paper presents a comparative study of data-driven system identification methods, including N4SID, ARX, and SINDYc, for modeling a tendon-actuated continuum robot with rolling joints developed at CERN. Despite the high number of joints of the robot, experimental analysis reveals that a two-degree-of-freedom dynamic model can accurately capture the system dynamics, owing to strong kinematic dependencies between the joints. The models are validated against experimental data, and used in the design of a model predictive controller, demonstrating their feasibility for real-time control.

Harald Minde Hansen, Bjørn Kåre Sæbø, Kristin Y. Pettersen +2

European Organization for Nuclear Research (CERN), Switzerland · Department of Engineering Cybernetics, Norwegian University of Science and Technology, NTNU, NO-7491 Trondheim, Norway

Robot Dynamics Identification Nonlinear System Identification System Identification Continuum Robot Control Tendon-Driven Actuation Soft Robotics

May 18, 2026cs.RO

ManiSoft: Towards Vision-Language Manipulation for Soft Continuum Robotics

Most existing vision-language manipulation research targets rigid robotic arms, whose fixed morphology limits adaptability in cluttered or confined spaces. Soft robotic arms offer an appealing alternative due to their deformability, but confront challenges such as unreliable proprioception and distributed low-level actuation. To investigate these challenges, we introduce \ManiSoft, a benchmark for vision-language manipulation with soft arms. ManiSoft features a tailored simulator that couples realistic soft-body dynamics with contact-rich interactions via an elastic force constraint. On this basis, ManiSoft defines four tasks, each highlighting distinct aspects of deformable control, from basic end-effector coordination to obstacle avoidance. To support policy training and evaluation, \ManiSoft{} includes an automated pipeline that generates

6{,}300

diverse scenes and corresponding expert trajectories. To produce high-quality trajectories at scale, we first employ a high-level planner to decompose each task into a sequence of waypoints, followed by a low-level reinforcement learning policy that generates torque commands to track waypoints. Benchmarking three representative policy models shows relatively promising results in clean scenes but substantial performance drop under randomization. Visualization analysis indicates that failures stem primarily from inaccurate visual estimation of proprioceptive state and limited exploitation of deformability for adaptive obstacle avoiding. We anticipate ManiSoft to serve as a valuable testbed, bridging the gap between rigid and soft arms in the context of vision-language manipulation. Out codes and datasets are released at https://buaa-colalab.github.io/ManiSoft.

Ziyu Wei, Luting Wang, Chen Gao +2

Beihang University · Hangzhou Innovation Institute, Beihang University · National University of Singapore

Language-Conditioned Robot Manipulation Robotic RL Robot Manipulation Benchmarks Continuum Robot Control VLMs for Robotics Soft Robotics