Diffusion-Based Super-Resolution Framework

Magnetic Particle Imaging (MPI) is an emerging medical imaging modality. MPI is based on the non-linear response of magnetic nanoparticles to an applied magnetic field and avoids ionizing radiation. The measured signal is the voltage induced in receive coils by the particles' response. Reconstructing the particle concentration from the signal constitutes the imaging task. Even using state-of-the-art measurement-based reconstruction, the associated spatial grid is very coarse, hence super-resolution (SR) techniques are important. In this work, we propose an approach for SR in MPI inspired by energy minimization. Different methods have been proposed for SR in MPI, ranging from upscaling of the associated system matrix to interpolation of the reconstruction. Here we incorporate SR into the reconstruction task via an energy minimization formulation. Following the plug-and-play approach to energy minimization we derive a splitting scheme and a SR method for MPI where the arising Gaussian denoising task is treated with a pre-trained learned Gaussian denoiser in a zero-shot fashion. This way, we incorporate benefits of deep learning without training and avoid the need of training data. Further, we provide a quantitative and qualitative evaluation of the proposed method. Hyper-parameter are selected via an extended parameter search. The found parameters are applied for reconstruction on real data. We show the applicability of our method on synthetic and on real data (MPIData: EquilibriumModelWithAnisotropy and 2D-OpenMPI Data). The proposed method employs a deep-learning denoiser without training -- thus it does not require presently scarcely available MPI training data. The denoiser behaves conservatively, i.e., no hallucination artifacts were observed. The SR approach is generic such that it can be applied in future MPI contexts involving different regularizers or different imaging tasks.

Accurate diagnosis in Digital Pathology (DP) relies on high-resolution whole-slide images, yet clinical deployment is often limited by hardware costs. Super-Resolution (SR) offers a promising alternative by computationally enhancing low-resolution acquisitions. However, existing SR methods frequently struggle to preserve fine-grained cellular morphology, leading to texture oversmoothing and blurred structural boundaries under complex tissue variability. To address this issue, we propose Morph-ISR, a morphology-aware implicit super-resolution framework for DP that restores diagnostically relevant details with sub-pixel precision. Morph-ISR reformulates SR as a continuous coordinate-based reconstruction problem and integrates an Implicit Position-aware Kernel Generator (IPKG) to adaptively model spatially varying tissue morphology. To further enhance structural fidelity, a Morphological Fidelity Prior (MFP) is introduced, leveraging semantic guidance from a pre-trained cell segmentation network to enforce boundary-preserving and region-aware reconstruction, thereby improving the representation of critical cellular boundaries and nuclear textures. Experiments on TCGA and SurGen datasets show that Morph-ISR achieves the best LPIPS and ST-LPIPS among the evaluated methods, reducing them by up to 38.37% and 39.55%, respectively, over the second-best methods while maintaining strong PSNR and SSIM. These results demonstrate superior preservation of diagnostically relevant cellular boundaries and nuclear textures, while compact parameterization and high throughput support efficient edge deployment. Code and trained models will be released upon publication.

The Loggia dei Lanzi in the Piazza della Signoria is one of Florence's most prominent structures visited by millions every year. Its construction history spans multiple centuries of modification. This paper presents the results of a thermal imaging campaign conducted in December 2025, using a FLIR T1020 HD camera, revealing hidden architectural features including walled-up openings and material transitions beneath the plaster surface. The favorable winter ambient conditions provided a feature-rich benchmark upon which to compare the results of enhancement algorithms and artificial intelligence models. We evaluate the application of AI-based image enhancement to thermal heritage documentation through a comparison of three tiers of image resolution in a photogrammetric Structure-from-Motion (SfM) pipeline: native resolution, FLIR's hardware-based pixel-shifted super-resolution (UltraMax), and state of the art AI-upscaled imagery models. We quantify the effect of each resolution tier on feature detection and tie-point generation, assessing whether the additional detail produced by super-resolution, whether hardware or AI-derived, translates into meaningfully denser and more accurate 3D thermal models. Our results contribute to the emerging intersection of artificial intelligence and heritage thermography by providing a direct comparison of hardware microscanning and AI super-resolution within a thermal photogrammetric workflow for cultural heritage. All datasets are made publicly available and accessible within an interactive 3D archival framework, and integrated into a custom citywide extended reality overlay application.

We propose a novel collaborative approach for face super-resolution (SR) and robust person re-identification from sequential or multi-view facial images. Traditional SR methods often suffer from blurring and distortion in faces recovered from poor-quality images due to low resolution. Image- and video-based facial SR methods using facial landmarks or segmentation also have similar challenges. To overcome these limitations, we leverage multiple correlated facial observations, across time or viewpoints, by introducing a transformer-based collaborative feature aggregation method that unifies identity features from multi-sequence or multi-view data. This allows faces in multiple sequences of an individual to contribute to accurately estimating common facial features. Furthermore, we propose a cascade SR network to progressively restore the high-resolution image of the target's face with gradual facial feature unification. The unified identity representation is further utilized in person re-identification scenarios, enabling accurate matching even under severe image degradation. The exhaustive experimental results and comparisons show that our method outperforms other state-of-the-art methods, demonstrating consistent improvements in both face super-resolution and re-identification performance. Our work highlights the effectiveness of joint identity reconstruction and progressive image restoration from multiple facial inputs in enhancing downstream visual recognition tasks.

Efficient processing is becoming increasingly important in infrared remote sensing, where satellite constellations produce large volumes of observations under constrained detector resolution, power, and downlink bandwidth. Multi-frame super-resolution (MFSR) offers a software-based route to spatial enhancement, but its evaluation in infrared sensing remains fragmented across private datasets and ad-hoc protocols. Existing benchmarks do not explicitly capture the thermal contrast, sensor noise, weak texture, and platform-induced frame-to-frame variation that characterize infrared video. We introduce IR275K, a curated benchmark containing 594 infrared video sequences and 275,196 frames. It provides sequence-level train/validation/test splits and a reproducible X4 evaluation protocol. As an initial architectural probe, we further evaluate CGMamba, a lightweight state-space model with 10.90M parameters and 112.14G FLOPs. CGMamba combines 2D rotary position encoding (2DRoPE) with center-guided cross-Mamba (CGCM) fusion for implicit multi-frame reconstruction. It achieves 33.19dB PSNR, outperforming infrared single-image super-resolution references by 0.35--0.52dB at substantially lower computational cost. Ablation results show that removing 2D~RoPE from CGCM causes a 1.53dB drop and severe grid-like artifacts. This indicates that explicit spatial anchoring is critical for stabilizing SSM-based cross-frame gating under infrared conditions. IR275K provides a reproducible foundation for accuracy--efficiency evaluation of infrared MFSR methods, while the architectural analysis offers a concrete starting point for spatially aware SSM design under resource-constrained infrared sensing. Dataset and evaluation resources are available at: https://github.com/InfraRecon7/IR275K.

Images acquired in surveillance environments often suffer from conditions such as low resolution, variations in pose, irregular illumination, and occlusions. Due to the low quality of these images, face recognition algorithms often struggle. This major limitation can be addressed by employing super-resolution techniques that enhance the details of the image. However, due to the high degree of difficulty of the problem, most super-resolution algorithms tend to cause distortions in the image and in the individual's identity. Thus, additional information must be incorporated into the processing to improve recognition robustness. In this regard, surveillance cameras can capture multiple images, even at low quality, and the data extracted from these images, such as consecutive video frames, can significantly enhance both super-resolution and facial recognition. In this work, we introduce FASR++, a diffusion-model-based super-resolution algorithm. It leverages a reference low-resolution image and features extracted from multiple auxiliary low-quality images to generate a super-resolved output, minimizing distortions in the individual's identity. Our approach recovers facial features without explicitly providing soft attributes or computing a function gradient to guide the reconstruction process. FASR++ generates high-quality images that can considerably improve performance in face recognition tasks when used as a pre-processing step. We validate our approach on two standard face recognition datasets and attain state-of-the-art results for verification, face recognition, and image quality metrics such as PSNR, SSIM, and LPIPS.

High-resolution satellite imagery is critical for observing fine-scale cloud structures that inform weather modification strategies like cloud seeding for rain-enhancement. However, the spatial resolution of current geostationary and polar-orbiting satellites is often insufficient for capturing small cloud features. Current super-resolution methodologies are suited for natural images and, therefore, struggle to generalize to satellite-captured spectral images of cloud cover. To address this, we propose a two-stage diffusion-based super-resolution framework to enhance the resolution of multi-spectral cloud microstructures by a factor of $4\times$. Specifically, we use inverse diffusion to recover the high resolution properties from low resolution. Stage 1 utilizes real-world paired data to learn robust degradation handling and inter-sensor alignment, while Stage 2 employs a self-supervised internal downgrading of high resolution data to refine structural learning and texture synthesis. Our approach outperforms the state-of-the-art transformer and diffusion-based baselines in both reconstruction accuracy and visual quality. We demonstrate that the two-stage method better captures fine cloud microstructures (e.g. convective turrets and cloud gaps) that are crucial for effective cloud seeding decisions. Ablation studies confirm the complementary benefits of the two stages: Stage 1 excels in coarse structural fidelity, while Stage 2 contributes enhanced detail and realism. These results highlight a practical path toward improving cloud microphysics analysis and as a step towards utilizing AI for climate and sustainability. Our code and models are publicly available at: https://github.com/hananshafi/superresolution-cloud-microphysics.

Light Field Super-Resolution (LFSR) necessitates accurate modeling of spatial-angular correlations while preserving intrinsic 4D ray coherence. However, maintaining such high-dimensional consistency remains challenging, primarily due to two inherent limitations in prevailing modeling paradigms. First, spatial and angular dimensions are often modeled in a decoupled manner, restricting early cross-dimensional interaction and leading to geometric inconsistencies. Moreover, although continuous sequence modeling paradigms show promise in representing epipolar structures, their rigid scanning mechanisms fundamentally conflict with epipolar geometry, limiting geometry-aware feature aggregation. To address these challenges, we propose a hybrid light field super-resolution network, termed SMART, which integrates a Slope-Guided Mamba and an Angular-Refined Transformer to effectively overcome these limitations. Specifically, we introduce an angular-modulated spatial module to bridge the decoupling gap, incorporating angular priors to strengthen spatial-angular correlation modeling. To mitigate the scan-geometry mismatch, we propose a manifold-aligned trajectory module that enables geometry-consistent sequence modeling along epipolar structures. Experiments on five benchmarks demonstrate that SMART achieves state-of-the-art performance, surpassing previous methods by 0.42 dB (PSNR) with significantly reduced artifacts.

Single image super-resolution aims to reconstruct high-resolution (HR) images from low-resolution (LR) inputs. Training SR models typically requires paired HR-LR data, which is difficult to obtain in reality. As a result, most methods synthesize LR images by artificially degrading HR images with handcrafted kernels or camera ISP adjustments. However, these synthetic degradations fail to capture the complexity of real LR images, leading to poor generalization in practice. To address this, we observe that even within a single high-quality image, regions at different depths exhibit varying resolutions, where distant regions act as LR patches and closer ones as HR patches. This allows the extraction of real, degradation-induced LR patches from real images. Since these LR patches lack paired HR counterparts, we propose LA-SR (Language Assistant for SR), a novel framework for unpaired SR. The key idea of LA-SR is to redefine unpaired SR in the language space, using vision-language models to bridge the LR-HR gap. LA-SR projects images into a semantically rich space representing both content and quality, and applies two language-guided losses: linguistic content loss to preserve semantic fidelity, and linguistic quality loss to enhance perceptual realism. With this alignment, LA-SR effectively super-resolves real LR inputs, producing realistic outputs that overcome the limitations of synthetic-data-trained methods.

Volume microscopy, including electron and light microscopy, suffers from severe anisotropic resolution due to physical axial sectioning. Existing self-supervised axial super-resolution (ASR) methods face a trilemma bounded by overly smoothed regression textures, structural hallucinations of pure diffusion models, and prohibitive inference latency. In this paper, we propose Skeleton-refinE Microscopy (SkelEM), a self-supervised framework that decouples ASR at the training-signal level: a frozen topological network and a diffusion refiner are optimized by disjoint objectives, separating low-frequency topology formulation from high-frequency detail enhancement. Building on this deterministic skeleton, we exploit a unified cycle-consistent mechanism on input sparse slices to simultaneously extract a real-domain residual prior and bidirectionally align the diffusion refiner, washing away cross-plane artifacts without synthetic bias. By truncating the reverse diffusion process with this physical prior, SkelEM achieves high-fidelity detail restoration in merely $\le 5$ steps. To rigorously assess cross-instrument generalization, we further introduce BRAVE-ASR, a new benchmark of co-aligned anisotropic and isotropic volumes acquired on a Plasma-FIB instrument. Across public benchmarks, SkelEM achieves the most favorable balance across the fidelity-perception trade-off among self-supervised methods, with state-of-the-art downstream membrane segmentation performance and robust zero-shot generalization across distinct modalities.

This work tackles the challenge of enhancing low-resolution LiDAR sensors for SLAM applications through a novel Deep Unrolling-based Super-Resolution (SR) model. We integrate an outlier removal module to ensure structural integrity while maintaining real-time performance. By leveraging a model-based optimization approach, our method efficiently reconstructs high-resolution point clouds while minimizing computational overhead. The proposed SR model is evaluated within a LiDAR SLAM framework, demonstrating significant improvements in pose estimation accuracy and efficiency compared to state-of-the-art SR methods.

Zero-Shot Self-Supervised Learning (ZS-SSL) has emerged as a promising paradigm for accelerated Magnetic Resonance Imaging (MRI) reconstruction, eliminating the reliance on fully-sampled external datasets. However, learning solely from a single under-sampled scan suffers from supervision scarcity and optimization instability, often leading to overfitting or artifacts. To address these challenges, we propose a robust physics-driven ZS-SSL framework that synergizes physical consistency with image-domain non-local priors. Our method introduces three core innovations: (1) a Coil Sensitivity Map (CSM)-Guided Dynamic Repository, which stabilizes the training trajectory by filtering physically inconsistent artifacts based on coil sensitivity constraints; (2) a SPIRiT-based regularization, which enforces k-space self-consistency via a learned correlation kernel and stochastic masking; (3) a Non-Local Self-Similarity (NSS) Pixel Bank, which leverages the high-fidelity reference established by the former modules to explicitly mine non-local anatomical similarities, thereby augmenting supervision in the image domain. Extensive experiments on the FastMRI dataset demonstrate that our approach achieves state-of-the-art performance, particularly under high acceleration factors, effectively bridging the gap between zero-shot learning and supervised methods. The code is available at https://github.com/Zolento/NS-SSL.

Remote sensing applications for environmental monitoring and disaster management are frequently constrained by a spatial--temporal trade-off: imagery with fine spatial detail is often acquired less frequently, whereas more temporally available observations are typically coarser. Single-image super-resolution provides a practical means to enhance coarse imagery without changing acquisition schedules, yet many Transformer-based SR models remain computationally expensive and can be sensitive to limited or geographically biased training data, which degrades robustness under out-of-distribution conditions. This paper presents NGram-MoSE, a lightweight Transformer architecture designed to improve both efficiency and texture continuity. NGram-MoSE introduces N-Gram Context Injection to strengthen cross-window local consistency and mitigate window-boundary artifacts, and incorporates a Mixture-of-Experts (MoE) feed-forward design to scale capacity through sparse activation without proportional growth in inference cost. Experiments on a geographically disjoint OOD test set show that NGram-MoSE achieves 31.68,dB PSNR while reducing FLOPs by $14\times$ relative to a heavyweight Transformer reference. Downstream evaluation on a landslide segmentation benchmark further demonstrates that restoring degraded inputs to the detector training scale improves performance, yielding a 4.47% absolute gain in mAP@50 over bicubic upsampling, and exhibits stronger cross-scale consistency under scale extrapolation. These results indicate that NGram-MoSE provides an effective SR module for resource-constrained remote sensing pipelines requiring robust generalization.

We introduce GaussianZoom, a generative zoom-in 3D reconstruction system with an iterative progressive framework that combines geometry-consistent scene modeling and multi-scale semantic reasoning to enable high-fidelity extreme zoom-in rendering from low-resolution inputs. To achieve this, we develop a novel multi-view consistent super-resolution module with depth-based feature warping and VLM-driven detail synthesis, ensuring accurate multi-view correspondence while enriching fine-scale appearance beyond the observed resolution. To support zooming across large magnification ranges, we further introduce a new expandable continuous Level-of-Detail hierarchy that dynamically modulates Gaussian visibility for smooth, alias-free cross-scale rendering. Experiments on Mip-NeRF360 and Tanks&Temples demonstrate that GaussianZoom achieves superior perceptual quality, multi-view consistency, and robustness under extreme magnification, establishing a strong baseline for generative zoom-in 3D scene reconstruction.

Face image super-resolution aims to recover high-resolution facial images from severely degraded inputs. Under extreme upscaling factors, fine facial details are often lost, making accurate reconstruction challenging. Existing methods typically rely on heavy network architectures, adversarial training schemes, or separate alignment networks, increasing model complexity and computational cost. To address these issues, we propose a lightweight U-Net based-architecture designed to reconstructs $128{ \times }128$ facial images from severely degraded $16{ \times }16$ inputs, achieving an $8 \times$ magnification. A key contribution is a novel auxiliary-training-free supervision strategy that leverages heatmaps generated by YOLO-World, an open-vocabulary object detector, to localize key facial features such as eyes, nose, and mouth. These heatmaps are converted into spatial weights to form a heatmap-guided loss that emphasizes reconstruction errors in semantically important regions. Unlike prior methods that require dedicated landmark or alignment networks, our approach directly reuses detector outputs as supervision, maintaining an efficient training and inference pipeline. Experiments on the aligned CelebA dataset demonstrate that the proposed loss consistently improves quantitative metrics and produces sharper, more realistic reconstructions. Overall, our results show that lightweight networks can effectively exploit detection-driven priors for perceptually convincing extreme upscaling, without adversarial training or increased computational cost.

Text image super-resolution (Text-SR) requires more than visually plausible detail synthesis: slight errors in stroke topology may alter character identity and break readability. Existing methods improve text fidelity with stronger recognition-based or generative priors, yet they still face two unresolved challenges under severe degradation: the text condition extracted from low-quality inputs can itself be unreliable, and a plausible global prior does not fully determine fine-grained stroke boundaries. We present PRISM, a single-step diffusion-based Text-SR framework that addresses these two challenges through Flow-Matching Prior Rectification (FMPR) and a Structure-guided Uncertainty-aware Residual Encoder (SURE). FMPR constructs a privileged training-time prior from paired low-quality/high-quality latents and learns a flow matching that transports degraded embeddings toward this restoration-oriented prior space, yielding more accurate and reliable global text guidance. SURE further predicts uncertainty-aware structural residuals to selectively absorb reliable local boundary evidence while suppressing ambiguous stroke cues. Together, these components enable explicit global prior rectification and local structure refinement within a single diffusion restoration pass. Experiments on both synthetic and real-world benchmarks show that PRISM achieves state-of-the-art performance with millisecond-level inference. Our dataset and code will be available at https://github.com/faithxuz/PRISM.

Super-resolution (SR) is a severely ill-posed problem with inherent ambiguity, as widely recognized in both empirical and theoretical studies. Although recent semantic-guided and multi-modal SR methods exploit large models or external priors to enhance semantic alignment, the fusion of heterogeneous modalities remains insufficiently understood in practice and theory. In this work, we provide the first theoretical modeling of multi-modal SR, revealing that prior methods are bottlenecked by sub-optimal modality utilization. Our analysis shows that the generalization risk bound can be improved by strengthening the alignment between modality weights and their effective contributions, while reducing representation complexity. This theoretical insight inspires us to propose the novel Multi-Modal Mixture-of-Experts Super-Resolution framework (M$^3$ESR) that employs generalization-oriented dynamic modality fusion for accurate risk control and modality contribution optimization. In detail, we propose a novel spatially dynamic modality weighting module and a temporally adaptive modality temperature scheduling mechanism, enabling flexible and adaptive spatial-temporal modality weighting for effective risk control. Extensive experiments demonstrate that our M$^3$ESR significantly boosts generalization and semantic consistency performances, which confirms our superiority.

Mesh-based simulations provide high-fidelity solutions to partial differential equations (PDEs), but achieving such accuracy typically requires fine meshes, leading to substantial computational overhead. Super-resolution techniques aim to mitigate this cost by reconstructing high-resolution (HR), high-fidelity solutions from low-cost, low-resolution (LR) counterparts. However, training neural networks for super-resolution often demands large amounts of expensive HR supervision data. To address this challenge, we propose SuperMeshNet, an HR data-efficient super-resolution framework for mesh-based simulations aided by message passing neural networks (MPNNs). At its core, SuperMeshNet introduces complementary learning, a semi-supervised approach that effectively leverages both 1) a small amount of paired LR-HR data and 2) abundant unpaired LR data via two jointly trained, complementary MPNN-based models. Additionally, our model is enriched by inductive biases, which are empirically shown to further improve super-resolution performance. Extensive experiments demonstrate that SuperMeshNet requires 90% less HR data to achieve even lower root mean square error (RMSE) than that of the fully supervised benchmark without the inductive biases. The source code and datasets are available at https://github.com/jykim-git/SuperMeshNet.git.

Recent progress in diffusion-based audio generation and restoration has substantially improved performance across heterogeneous conditioning regimes, including text-conditioned audio generation and audio-conditioned super-resolution. However, training audio diffusion models remains computationally expensive, and most existing pipelines still rely on static optimization recipes that treat the relative importance of training signals as fixed throughout learning. In this work, we argue that a major source of inefficiency lies in the evolving balance between semantic acquisition and generation-oriented refinement. Early training places stronger emphasis on acquiring condition-aligned semantic structure and coarse global organization, whereas later training increasingly emphasizes temporal consistency, perceptual fidelity, and fine-detail refinement. To characterize this evolving balance, we introduce a progress-based regime variable derived from the training-time slope of an SSL-space discrepancy, which measures semantic progress during training. Based on this signal, we develop three complementary stage-aware mechanisms: decayed SSL guidance for early semantic bootstrapping, self-adaptive timestep sampling driven by the regime variable, and structure-aware regularization activated from convergent grouped organization in parameter space. We evaluate these mechanisms on text-conditioned audio generation and audio-conditioned super-resolution. Across both settings, the proposed stage-aware strategies improve convergence behavior and yield gains on the primary generation and spectral reconstruction metrics over standard static baselines. These results support the view that efficient audio diffusion training can benefit from treating external guidance, internal organization, and optimization emphasis as stage-dependent components rather than fixed ingredients.

Airborne Laser Scanning (ALS) can collect point clouds across large areas, enabling large-scale forest inventory. However, ALS point clouds are sparse and noisy, resulting in inaccurate individual-tree-level forest inventory, such as stem localization and tree size estimation. To overcome this problem, we propose a deep learning model, 3D Forest Super Resolution (3DFSR), to simultaneously improve point density and reduce noise for ALS forest point cloud. 3DFSR is a voxel-based CNN with a U-Net architecture. The proposed 3DFSR is evaluated on ALS point clouds collected in both temperate forests in the U.S. and boreal forests in Germany. Experimental results demonstrate that 3DFSR can generate finer point clouds of tree structure than other state-of-the-art point cloud super-resolution algorithms, achieving 0.249 m Chamfer Distance and 2.711 m Hausdorff Distance. Furthermore, to verify the effectiveness of 3DFSR point clouds in forest inventory, we conduct stem detection, DBH measurements, and stem reconstruction on both original ALS point clouds and 3DFSR enhanced point clouds. We find that stem detection and reconstruction algorithms developed for TLS/MLS point clouds can directly work on our 3DFSR point clouds, and DBH can be derived with circle-fitting method. F1 score of stem detection is improved from 0.71 on original ALS point clouds to 0.97 on 3DFSR point clouds; DBH estimation improves from 13.45 cm RMSE using allometric equations to 6.43 cm using circle fitting; comparing to stems reconstruction from MLS point clouds, stem reconstructed from 3DFSR point clouds has 0.170 m of Chamfer Distance and 0.377 m of Hausdorff Distance, and 0.95 R2 volume estimation. Finally, we find that the proposed 3DFSR is applicable to process point densities from 10 to 1700 points/m2; it also can be generalized across data collected from different LiDAR platforms without transfer learning.

Single-Image Super-Resolution (SISR) aims to reconstruct a High-Resolution (HR) image from a Low-Resolution (LR) observation, a fundamentally ill-posed problem where high-frequency details are severely degraded at large upscaling factors. Recent advances have been driven by transformer-based architectures and diffusion models improve global context modeling and perceptual quality at the cost of increased computational complexity. In contrast, this work focuses on enhancing the expressivity of local operators under minimal resources. We propose SRGAN--CKAN, a hybrid super-resolution framework that integrates Convolutional Kolmogorov--Arnold Networks (CKAN) into an adversarial learning setting reformulating convolution as a nonlinear patch-based transformation. The proposed operator replaces linear local mappings with spline-based functional representations, allowing expressive modeling of complex local structures and high-frequency textures using minimal hardware resources. Experimental results demonstrate that the proposed approach improves perceptual quality while preserving reconstruction fidelity, achieving a favorable balance between distortion-based and perceptual metrics. These results are obtained under constrained computational settings, highlighting the efficiency of the proposed formulation. Overall, this work introduces a complementary direction to existing approaches by improving the representational power of local transformations, providing an efficient and scalable alternative to globally intensive architectures.

The exponential surge in high-resolution remote sensing data faces a severe bottleneck in satellite-to-ground transmission. Limited downlink bandwidth forces the use of extreme high-ratio compression, which irreversibly destroys high-frequency structural details essential for downstream machine perception tasks like object detection. While current super-resolution techniques attempt to recover these details, regression-based methods often yield over-smoothed textures, and generative diffusion models frequently introduce structural hallucinations that mislead detection systems. To address this trade-off, we propose the Structure-Aware Latent Diffusion (SALD) framework, an asymmetric edge-cloud collaborative SR system. At the resource-constrained edge, the system decouples imagery into a highly compressed low-frequency payload and a lightweight soft structural prior. Transmitting this decoupled representation minimizes bandwidth consumption. On the powerful cloud side, we introduce a Structure-Gated Large Kernel (SGLK) module and a Semantic-Guidance Engine (SGE) within the diffusion backbone. These modules leverage the transmitted structural priors to gate large-kernel convolutions, effectively capturing long-range dependencies inherent in aerial scenes while actively suppressing generative hallucinations. Extensive experiments on both the MSCM and UCMerced datasets demonstrate that, even under extreme bandwidth constraints, SALD achieves superior perceptual quality (LPIPS) and significantly enhances downstream performance in both scene classification and small-target detection.

Self-supervised video denoising methods typically extend image-based frameworks into the temporal dimension, yet they often struggle to integrate inter-frame temporal consistency with intra-frame spatial specificity. Existing Video Blind-Spot Networks (BSNs) require noise independence by masking the center pixel, this constraint prevents the use of spatial evidence for texture recovery, thereby severing spatiotemporal correlations and causing texture loss. To address this, we propose Frames2Residual (F2R), a spatiotemporal decoupling framework that explicitly divides self-supervised training into two distinct stages: blind temporal consistency modeling and non-blind spatial texture recovery. In Stage 1, a blind temporal estimator learns inter-frame consistency using a frame-wise blind strategy, producing a temporally consistent anchor. In Stage 2, a non-blind spatial refiner leverages this anchor to safely reintroduce the center frame and recover intra-frame high-frequency spatial residuals while preserving temporal stability. Extensive experiments demonstrate that our decoupling strategy allows F2R to outperform existing self-supervised methods on both sRGB and raw video benchmarks.

Face super-resolution aims to recover high-quality facial images from severely degraded low-resolution inputs, but remains challenging due to the loss of fine structural details and identity-specific features. This work introduces SwinIFS, a landmark-guided super-resolution framework that integrates structural priors with hierarchical attention mechanisms to achieve identity-preserving reconstruction at both moderate and extreme upscaling factors. The method incorporates dense Gaussian heatmaps of key facial landmarks into the input representation, enabling the network to focus on semantically important facial regions from the earliest stages of processing. A compact Swin Transformer backbone is employed to capture long-range contextual information while preserving local geometry, allowing the model to restore subtle facial textures and maintain global structural consistency. Extensive experiments on the CelebA benchmark demonstrate that SwinIFS achieves superior perceptual quality, sharper reconstructions, and improved identity retention; it consistently produces more photorealistic results and exhibits strong performance even under $8\times$ magnification, where most methods fail to recover meaningful structure. SwinIFS also provides an advantageous balance between reconstruction accuracy and computational efficiency, making it suitable for real-world applications in facial enhancement, surveillance, and digital restoration. Our code, model weights, and results are available at https://github.com/Habiba123-stack/SwinIFS.

Single image super-resolution aims to reconstruct high-resolution images from low-resolution inputs. This paper proposes FreeTransformSR, a novel lightweight super-resolution network based on a channel-wise free low-rank learnable transform. The transform learns task-adaptive basis functions in a data-driven manner, enabling adaptive feature modulation with minimal parameter overhead. To further enhance high-frequency detail recovery, we introduce a local feature modulation branch that complements transform-domain processing with depthwise convolution. In addition, a soft complexity adaptive module dynamically fuses the outputs of local convolution and window self-attention branches through a lightweight gating network, adaptively adjusting the fusion ratio based on regional texture characteristics. An adaptive intensity modulation strategy is also incorporated to adjust transform-domain response strength at the sample level, enabling the network to dynamically adjust processing intensity according to input features. Extensive experiments on five benchmark datasets demonstrate that FreeTransformSR achieves competitive PSNR/SSIM performance with significantly fewer parameters and FLOPs. Specifically, FreeTransformSR achieves 32.41 dB on BSD100 x2 and 27.00 dB on Urban100 x4 with only 595K parameters, while delivering faster inference speed than competing methods, making it well-suited for deployment in resource-constrained scenarios. Source code is available at: https://github.com/HJiLi/FreeTransformSR.