Edge

Deploying neural networks on microcontroller units (MCUs) is critical for edge intelligence but remains challenging due to tight memory, storage, and computation constraints. Existing approaches, such as model compression and hardware-aware neural architecture search (HW-NAS), often depend on proxy metrics, incur high search cost, and do not fully bridge the gap between architecture design and verified deployment. This paper presents AutoMCU, a feasibility-first large language model (LLM)-based multi-agent system for automated neural network customization under MCU constraints. Given natural-language task requirements and hardware specifications, AutoMCU iteratively generates structured architecture candidates, filters infeasible designs through vendor toolchain feedback before training, evaluates feasible models under a controlled protocol, and verifies deployability through backend-grounded deployment analysis. AutoMCU includes two key mechanisms: 1) hardware-in-the-loop architecture generation for early elimination of undeployable candidates under RAM and Flash constraints, and 2) state-isolated multi-agent scheduling for stable coordination of proposal, training, evaluation, and deployment stages. Experiments on CIFAR-10 and CIFAR-100 under strict MCU constraints show that AutoMCU achieves competitive accuracy while reducing customization time to about 1--2 hours, compared with hundreds of GPU hours for representative MCU-oriented HW-NAS baselines. Comparisons with ColabNAS and the LLM-based NAS method GENIUS on NAS-Bench-201 further demonstrate the effectiveness and stability of AutoMCU. Real-device deployments on multiple STM32 microcontrollers validate its practical applicability to MCU-scale edge intelligence.

Deploying large deep neural networks on memory-constrained mobile devices is a central challenge in edge ML. While compression, pruning, and quantization reduce per-parameter cost, transformer-based models remain too large for the 3.3-7.4 GB RAM envelope of commodity Android handsets. We present the DNN pipeline scheduling subsystem of CROWDio, which achieves practical ONNX inference across resource-constrained Android workers without model modification, by distributing memory pressure across devices via five mechanisms: JIT deferred partition loading, a single-partition-resident constraint, a 4-tier affinity scheduler, a zlib-compressed tensor transport, and a streaming 1:1 dependency model. Evaluated on DistilBERT (Sanh et al., 2019) (approximately 67 M parameters, SST-2) across five Android handsets over ten runs, our system holds peak per-device RSS to 43+-2 MB and limits battery draw to 50+-3 mAh per run, while streaming concurrency cuts batch latency 34% below barrier synchronisation.

This work presents E-ReCON, a 16 Kb energy and resource-efficient digital compute-in-memory (DCIM) macro based on a compact 3T1R ReRAM bitcell for edge-AI inference. The proposed bitcell occupies only 0.85 um^2 and supports reliable AND-based in-memory multiplication for both conventional convolutional neural network (CNN) and spiking neural network (SNN) workloads. To reduce accumulation overhead, a novel interleaved 10T/28T adder tree is introduced, reducing transistor count and power consumption by 37% and 28%, respectively, compared to a conventional 28T RCA-based design. Implemented in 65 nm CMOS at 1.2 V, the proposed macro achieves a minimum latency of 0.48 ns, throughput of 2.31-3.1 TOPS, and energy efficiency of up to 419 TOPS/W. When evaluated on LeNet-5, AlexNet, and CNN-8 models, the macro achieves 97.81%, 93.23%, and 96.51% accuracy on MNIST/A-Z, CIFAR10, and SVHN datasets, respectively. In addition, 40% pruning preserves nearly 99.8% of the original accuracy while reducing MAC operations and computation cycles. For SNN-oriented workloads, the proposed AND-type bitcell efficiently supports spike-weight multiplication with low switching activity, where the 2A2W configuration achieves accuracy close to the FP32 baseline across VGG-8, VGG-16, and ResNet-18 networks on CIFAR-10, CIFAR-100, and ImageNet-1K datasets. Compared to prior ADC-based ReRAM-CIM designs, the proposed architecture improves latency and energy efficiency by nearly 30-40% while maintaining robust operation under full PVT and ReRAM variability. Overall, E-ReCON provides a scalable, low-latency, and energy-efficient nvCIM platform for next-generation edge-AI, IoT, biomedical sensing, and neuromorphic applications.

Diffusion inference remains costly for edge deployment, yet existing accelerators focus almost exclusively on score networks because standard drift is merely a trivial linear scaling. Kuramoto orientation diffusion replaces this trivial drift with locally coupled phase interactions, improving sampling efficiency but introducing a new hardware bottleneck: a center-dependent nonlinear 5 x 5 stencil evaluated at every reverse step. This kernel maps poorly to conventional CNN accelerators and matrix-oriented engines. We present SA-Kura, to our knowledge the first digital systolic-array accelerator dedicated to locally coupled Kuramoto drift. By reformulating pair-wise sinusoidal coupling into neighbor accumulation independent of the center phase followed by a single center-dependent multiply-subtract combination, SA-Kura eliminates in-PE transcendental units and enables regular systolic execution with register-level reuse. SA-Kura was implemented in synthesizable RTL, integrated into a lightweight RISC-V-based SoC, prototyped on FPGA, and evaluated through 45 nm CMOS synthesis and power analysis. For the drift kernel only, compared with software execution of the same kernel on the processor core in the same SoC platform, SA-Kura reduces latency and energy by 193x and 69.4x, respectively. Compared with a standalone Jetson Orin Nano CUDA implementation of the same kernel, it is 6.57x faster and achieves approximately 46.0x lower energy per pixel.

Wi-Fi-based human activity recognition (HAR) has emerged as a promising approach for contactless sensing, leveraging channel state information (CSI) collected from wireless transceivers. While existing studies have primarily concentrated on single-user scenarios, real-world deployments often involve multi-user settings where concurrent users' movements induce overlapping CSI patterns that challenge conventional classification methods. To address this limitation, this paper introduces an attention-based multi-user activity recognition (AMAR) framework that formulates HAR as a set prediction problem. The transformer-based architecture in AMAR leverages learnable query embeddings acting as specialized activity detectors, enabling the simultaneous identification of multiple activities from composite CSI representations. Moreover, to address deployment constraints, AMAR is designed in an edge-cloud split architecture form where lightweight convolutional networks on edge devices perform initial feature extraction, followed by residual vector quantization that achieves substantial bandwidth reduction while preserving activity-discriminative information. The cloud component performs final activity prediction through attention-based set matching, enabling the system to handle varying occupancy levels. Across classroom, meeting-room, and empty-room environments, on average AMAR nearly doubles the rate of perfectly predicting all concurrent activities compared to the best baseline. Moreover, it achieves an $F_1$-score of 53.4% compared to 45.6% for the best benchmark, and reduces occupancy estimation error by 74%, while minimizing bandwidth substantially.

Autonomous systems and smart-industry deployments increasingly split computation across near-sensor, edge, and cloud resources, where tight energy, latency, and reliability budgets demand run-time adaptivity. In practice, deciding what to compute and transmit at each point is pivotal; yet as multimodal sensor suites (cameras, LiDAR/depth, etc.) proliferate at the edge, most prior approaches either (i) fuse modalities on powerful servers or (ii) apply uni-modal near-sensor filters that ignore cross-modal dependencies, leading to redundant transmissions or missed events. We present FusionSense, a fusion-aware intelligent sensing framework for energy-constrained autonomous edge systems. Lightweight near-sensor classifiers are trained via a three-step procedure: (i) a server-side fusion model learns the downstream task, (ii) filter-out-safe (FoS) labels quantify each modality's necessity relative to the fused decision, and (iii) an edge-side fusion model is compacted by injecting near-sensor predictions as auxiliary signals. The result is a run-time decision layer that jointly reduces compute and communication while scaling linearly with sensor count. On a dual-modality (RGB+Depth/LiDAR) setup with SynDrone, FusionSense sustains task quality at substantially higher data-reduction rates than uni-modal filters and delivers large end-to-end gains: up to 33x lower energy at 1% FoI prevalence, 11x at 10%, a 92.3% reduction in quality loss at a fixed 30% data reduction, and roughly 1.5x higher energy savings than the best prior filtering baseline.

Dramatic cost reductions driven by private sector innovations have led to a rapid increase in the number of satellites in orbit and a corresponding surge in space-generated data. As this trend continues, transmitting large volumes of data to Earth for processing may become increasingly costly and challenging due to potential space-to-Earth link congestion and increased latency. Moreover, traditional ground station networks may face difficulties accommodating growing data flows and workloads because of capacity constraints, complex scheduling logistics, and restricted visibility windows, which can limit scalability. Space Data Centers (SDCs) -- software-driven, multi-tenant artificial intelligence-based service platforms capable of processing data in orbit to generate actionable insights for client satellites and ground users -- represent a promising approach to address these challenges. This article presents the architecture of a Low Earth Orbit SDC satellite constellation, considering orbital design, inter-satellite links and network topology, computational resource organization, and software service orchestration. We analyze the potential technical feasibility and economic viability of SDCs using forecasting models informed by technology roadmaps and illustrate the concept through Earth observation and lunar exploration use cases.

Digital Twin (DT) technology holds immense potential for surgical planning and personalized medicine. However, generating interactive, patient-specific anatomical twins currently relies on computationally heavy Server-Side Rendering (SSR) or expensive local workstations, creating significant barriers to deployment, especially in resource-constrained settings (RCS). This paper presents a decentralized, client-side WebGPU architecture that democratizes access to high-fidelity anatomical Digital Twins. By bypassing standard server-side rendering pipelines, the framework executes deterministic single-pass raymarching and morphological gradient calculations directly on low-cost integrated edge GPUs. Eliminating the network latency inherent to cloud-rendered solutions, the system achieves a Time to First Pixel (TTFP) of under 920.0ms and maintains stable interactivity at >= 82.0 FPS. Continuous Interaction Fidelity is maintained via uniform buffers, enabling zero-latency manipulation of tissue parameters for dynamic clinical decision-making. By proving that complex 3D medical simulations of patient-specific MRI scan can be executed natively in the browser without deep learning or external computational dependencies, this architecture provides a scalable, affordable foundation for the widespread clinical adoption of healthcare Digital Twins.

Comprehensive and efficient validation of connected and automated vehicles (CAVs) is critical prior to real-world deployment. While simulation-based testing offers scalability, existing approaches often lack seamless integration with real vehicles and field data, limiting their fidelity in capturing dynamic, real-world interactions. To bridge this gap, this paper proposes a novel real-time hybrid digital twin platform. Its core innovation lies in the tight coupling of a high-fidelity CARLA-SUMO co-simulation with a physical test site and vehicle via a low-latency Vehicle-to-Everything (V2X) communication link. A custom-developed middleware serves as the critical bridge, synchronizing a real CAV's kinematic state as a shadow vehicle in the simulation and translating virtual control commands into chassis-actuating Controller Area Network (CAN) messages for closed-loop control. Detailed implementation includes using photogrammetry for full-scale asset reconstruction and a cloud-edge collaborative architecture for scalable, multi-user operation. Experimental results demonstrate stable synchronization and effective closed-loop control with low latency, confirming the platform's practicality for multi-scenario CAV verification.

Flapping-Wing Micro Aerial Vehicles (FWMAVs) provide exceptional maneuverability and aerodynamic efficiency but pose significant challenges for onboard control due to nonlinear dynamics and stringent Size, Weight, and Power (SWaP) constraints, as exemplified by a butterfly-inspired robot less than 30 gram. To this end, we present a hierarchical neuromorphic control framework that enables fully onboard, closed-loop flight on a widely available, resource-constrained ESP32 microcontroller with a unit cost of approximately $5. Specifically, our method deploys two lightweight Spiking Neural Networks (SNNs) onboard: one for state estimation from raw sensory feedback and another for control via modulation of a Central Pattern Generator (CPG) for wing actuation. Trained by imitation learning, the system achieves stable pitch and heading angle tracking during untethered real-world flight. Experimental results further reveal that the SNN-based controller reduces latency by 36% (1059us to 680us) and power by 18% (0.033W to 0.027W) for inference compared to the conventional Artificial Neural Network (ANN) baseline, demonstrating the viability of spike-based computation without specialized hardware. To the best of our knowledge, this work constitutes the first demonstration of fully onboard neuromorphic control for autonomous flight of a FWMAV, highlighting the potential of SNNs to enable energy-efficient autonomy under stringent SWaP constraints. Visual abstract: http://bit.ly/4nI8ECY Code: https://anonymous.4open.science/r/Espikify-76E3/

The global deployment of edge intelligence operates across heterogeneous legal frameworks. While some regions permit centralized learning (CL) via cloud data aggregation, others enforce strict data localization, necessitating federated learning (FL). This operational dichotomy introduces two incompatible optimization regimes (i.e., unbiased global gradients yet coupled with internal covariate shift in CL versus biased, drift-prone local updates in FL), resulting in that any naive integration of the two lacks rigorous theoretical guarantees. To fill this gap, we propose OmniISR, a unified framework that fuses pure CL, pure FL, and hybrid CL-FL training modes via equipping intermediate supervision and regularization (ISR) signals at multiple hidden layers. Specifically, we propose (i) to use mutual-information (MI) as intermediate supervision to align shifting internal covariate in CL and client-drifting representations in FL, and (ii) to adopt negative-entropy (NE) as intermediate regularizer to penalize overconfident prediction, preserve representational uncertainty, and avoid device-specific collapse. On the theory side, we derive (i) a unified, ISR-agnostic, and non-asymptotic O(1/sqrt(T)) convergence bound that shows the introduced ISR does not violate standard SGD convergence, (ii) a federated drift-bound that quantifies the ISR-reduced client drift, (iii) a gradient-alignment guarantee that ensures non-conflicting CL and FL updates under mild bias, and (iv) an explicit escape-time bound that indicates that CL-FL hybrid mixing enlarges effective stochasticity and accelerates escape from strict saddles. Extensive experiments demonstrate that OmniISR consistently improves model performance in both centralized and federated paradigms, reduces the CL-FL gap by 22.60%, and yields 37/48 paired metric wins across multiple FL algorithms.

Deep learning models have shown strong performance in medical image analysis, but deploying them in low-resource clinical environments remains difficult due to computational, memory, and power constraints. This paper presents a multi-strategy compression framework for brain tumor classification from MRI, encompassing quantization-aware training, knowledge distillation from a DenseNet-101 teacher to a compact DenseNet-32 student with low-bit post-training quantization, and Float16 post-training quantization on a lightweight MobileNetV2 backbone. Using a multi-class brain tumor MRI dataset containing glioma, meningioma, pituitary tumors, and healthy controls, we provide full experimental validation of the MobileNetV2-based pipeline, training the classifier through a three-stage transfer learning process and applying Float16 quantization via TensorFlow Lite. The DenseNet-based distillation and quantization-aware training strategies are described as complementary compression approaches within the framework, with their complete empirical evaluation reserved for future work. Experimental results on the MobileNetV2 pipeline show that the quantized model achieves 82.37 percent validation accuracy compared to the 82.20 percent full-precision baseline, reducing model size from 35.34 MB to 5.76 MB, a 6.14x compression ratio with no meaningful accuracy loss. Per-class evaluation confirms that quantization preserves diagnostic performance uniformly across all four tumor categories. These findings demonstrate that lightweight quantized models can deliver clinically viable brain tumor screening in resource-constrained healthcare settings.

The bottleneck of useful agentic intelligence has shifted from compressing world knowledge into a single model to executing a coordinated system. This position paper argues that personal-agent architecture must move to the edge because the core properties of agentic intelligence tasks, particularly their structural coupling with high-fidelity local context and the need for zero-latency execution loops, do not sit well with cloud-centric designs. We develop this claim through three structural shifts. First, the Prefrontal Turn: the main marginal lever of capability has moved from pre-training scale to framework-level executive control. Such control must remain physically close to the environment of action if the agent is to preserve cognitive alignment. Second, the Data-Geography Paradox, the ``dark matter'' of agentic data (local file hierarchies, real-time sensor streams, and transient OS states) degrades, disappears, or loses meaning once prepared for cloud transmission, thereby cutting the agent off from ground-truth context. Third, the interaction-alignment loop, the only economically and ecologically sustainable source of agentic refinement data is the high-fidelity implicit preference signal produced through real-time local interaction. Third, the interaction-alignment loop, the only economically and ecologically sustainable source of agentic refinement data is the high-fidelity implicit preference signal produced through real-time local interaction. We conclude with falsifiable predictions for the next deployment cycle of personal agents.

With the advent of sixth-generation (6G) mobile communication technology, vehicle-to-everything (V2X) communication faces unprecedented challenges in communication efficiency, system generalization capabilities, and model collaboration. Conventional machine learning struggles with high-dimensional state spaces, slow convergence, and poor generalization under heterogeneous V2X nodes, rapidly varying channels, and multimodal sensing data in V2X systems. To address these issues, we propose a quantum-enhanced framework for V2X communication and model aggregation that targets efficient, robust, and intelligent transportation in 6G, which includes four modules: the channel-adaptive semantic communication module, the multimodal fusion module, the model transfer module, and the federated aggregation module. Specifically, the channel-adaptive semantic communication module leverages quantum convolutional neural networks (CNN) and quantum distortion metrics to enable efficient transmission and strong generalization across diverse conditions. The multimodal fusion module exploits quantum attention and entanglement to compress features and associate semantics across heterogeneous data. The model transfer module employs quantum reinforcement learning to model decision-making and improve adaptability in dynamic environments. The federated aggregation module integrates quantum tensor decomposition with backpropagation-based corrections to provide privacy preservation with low overhead and to strengthen global model robustness. This work outlines a new paradigm for communication and model collaboration in future 6G intelligent transportation.

Vehicular edge computing (VEC) enables latency-sensitive vehicular applications by offloading computation-intensive tasks to nearby edge servers. However, real-world vehicular workloads are typically modeled as heterogeneous directed acyclic graph (DAG) tasks with complex dependency structures, making joint offloading and resource allocation highly challenging. Moreover, distributed MEC deployment raises privacy concerns when collaboratively training learning-based policies. In this paper, we propose a Federated Meta Deep Reinforcement Learning framework with GAT-Seq2Seq modeling (FedMAGS) for heterogeneous task offloading in VEC systems. The proposed approach leverages Graph Attention Networks to capture DAG dependencies, a Seq2Seq-based policy to generate structured offloading decisions, and federated meta-learning to enable fast adaptation across distributed MEC servers without sharing raw data. Extensive simulations demonstrate that FedMAGS achieves faster convergence, lower execution delay, and better scalability compared with state-of-the-art baselines. In addition, the federated design preserves data privacy while reducing communication overhead, making the framework well suited for dynamic and large-scale VEC environments.

Deploying large language model (LLM) on edge device enables personalized LLM agents for various users. The growing availability of diverse personalized agents presents a unique opportunity for peer-to-peer (P2P) collaboration, wherein each user can delegate tasks beyond the local agent's expertise to remote agents more suited for the specific query. This paper introduces PPAI, the first personalized LLM agent interoperability system, which enables users to collaborate with each other based on agent specialization. However, the ever-changing pool of agents and their interchangeable capacity introduce new challenges when it comes to matching queries to agents and balancing loads, compared with existing P2P systems. Therefore, we propose a scalable query-agent pair scoring mechanism based on prototypes to identify suitable agents within a P2P network with churn. Moreover, we propose a multi-agent interoperability Bayesian game to balance local demand and global efficiency, when changes in remote agent load occur too quickly to be observed. Finally, we implement a prototype of PPAI and demonstrate that it substantially broadens the range of tasks that could be carried out while maintaining load balance. On average, it achieves an accuracy improvement of up to 7.96% across multiple tasks, while reducing latency by 16.34% compared to the baseline.

Quasi-bimodal objects, such as text, road signs, and barcodes, play a basic yet vital role in daily visual communication. By boiling these down to clear silhouettes, binarization uses a minimal language to convey essential vision cues for maximum downstream efficiency, especially for tasks that require simple geometric, topological reasoning rather than heavy appearance modeling. The catch is that frame-based imaging often struggles on mobile platforms like drones, self-driving cars, and underwater vehicles, in which rapid motion causes severe motion blur and harsh lighting washes out scene details. To overcome these physical limits, neuromorphic vision via event cameras, featuring microsecond time resolution and high dynamic range, steps in as a natural solution. Building upon this event-driven paradigm, we propose a simple yet effective dual-modal approach that harnesses the synergy between frames and events for training-free, real-time, high-frame-rate binarization on CPU-only devices. Extensive evaluations show that it earns competitive performance against leading techniques in reducing blur artifacts and delivers impressive improvements under challenging illumination at a lower computational cost. Besides, its asynchronous nature bypasses long-standing event-scarcity issues that break traditional time-binning reconstruction at fixed time slots, maintaining clear target shapes even at extreme kilohertz frame rates. Its binary results further serve as reliable representations to facilitate a range of downstream tasks. This work paves the way towards lightweight perception and interaction in embodied intelligence on resource-constrained edge platforms.

Federated learning on edge devices must cope with non-IID client data and tight memory budgets. Adaptive optimizers like Adam stabilize training under data heterogeneity but require storing full-precision momentum and variance states, often tripling client memory overhead. This limits deployable model sizes and concurrent federated jobs on resource-constrained devices. We empirically observe that momentum and variance in federated Adam exhibit fundamentally different statistical properties: momentum values are symmetric and bounded, while variance spans eight orders of magnitude with log-normal structure. Motivated by this asymmetry, we propose \textbf{Q-LocalAdam}, which applies distribution-aware 8-bit quantization block-wise linear encoding for momentum and log-space encoding for variance while keeping model parameters in full precision. Across CIFAR-10 and CIFAR-100 under varying data heterogeneity ($α\in \{0.1, 0.5, 1.0, \text{IID}\}$), Q-LocalAdam achieves $3.37\times$ optimizer memory reduction with no accuracy loss under moderate heterogeneity and significant improvements under extreme heterogeneity (e.g., +5.74pp on CIFAR-100, $α=0.1$). Multi-seed validation confirms statistical significance ($p<0.01$). In contrast, naive uniform quantization degrades to random performance, demonstrating that distribution-aware design is essential. Q-LocalAdam enables larger models and more concurrent workloads on memory-constrained edge devices without modifying the federated protocol.

Adapting large AI models (LAMs) to personalized edge data is challenging because wireless devices have limited memory, computation, and uplink capacity. Federated fine-tuning preserves data privacy but still requires each device to host the full model, while split learning reduces device memory at the cost of heavy activation transmission. This paper proposes TSFLora, a token-compressed split fine-tuning framework for communication-efficient LAM adaptation at the edge. TSFLora combines attention-guided token selection, token merging, low-bit activation quantization, and LoRA-based adaptation within a split federated training pipeline. The key idea is to compress the intermediate token sequence before transmission so that the system reduces both uplink traffic and server-side processing without changing the frozen backbone. Experiments on ViT models over CIFAR-10, CIFAR-100, and TinyImageNet show that TSFLora achieves up to \textbf{6.8$\times$} communication reduction and \textbf{41%} memory saving while maintaining competitive accuracy.

Federated Learning (FL) has emerged as a promising paradigm for collaborative model training across distributed edge devices while preserving data privacy especially with the huge increase amount of data due to the adoption of technologies which contributes to the growing number of IoT devices. Storing this amount of data centrally is challenging due to issues like limited communication, privacy, and regulations. FL can be Centralized (CFL), Decentralized (DFL), and Semi-decentralized (SDFL). Choosing the right FL architecture depends on the application's needs. However, very few research studies have experimentally compared these three types of architectures to not only understand the respective strengths and limitations, but also trade-offs between different performance indicators. This paper overcome this lack of analysis, conducting experimental analyses using the Fedstellar simulator, MNIST dataset, and MLP classifier.

Transformer models are rapidly becoming a cornerstone of modern Internet of Things (IoT) applications, yet their computational and memory demands far exceed the capabilities of a single typical ultra-low-power IoT device. We present CATS, a framework for distributed transformer inference on ultra-low-power wireless devices, enabling multiple devices to collaboratively execute models far larger than what a single device can sustain. At its core, CATS is a communication-aware distributed transformer inference scheme co-designed across transformer partitioning, wireless communication and training. It employs SomeGather, a new pruned communication primitive that selectively broadcasts activation columns to reduce communication bandwidth and RAM usage without sacrificing model accuracy. Building on SomeGather, we design a partitioning method that exploits this primitive for efficient model parallelism. To cope with unreliable wireless communication, CATS employs message-dropout during training, which mimics packet losses and yields models that are robust to message loss during inference. In real-world experiments, we show that CATS brings distributed transformer inference to ultra-low-power wireless devices for the first time, with deployments on up to 16 devices that collaboratively execute transformer models up to 14 times larger than what a single device can run.

Under the trend of multi-waveform coexistence in 6G IoT, intelligent receivers must first identify physical-layer waveform types before performing correct demodulation and resource scheduling. However, existing signal identification research largely focuses on symbol-level modulation classification. Research directly targeting physical-layer waveform types (e.g., OFDM, OTFS, LoRa) is not only extremely scarce but also heavily reliant on deep neural networks and complex time-frequency transforms, making deployment on resource-constrained terminals difficult. Symbol modulation classification methods themselves cannot circumvent the prerequisite of ``waveform identification first.'' To address this dual gap, we propose an ultra-lightweight waveform classification framework based on time-frequency multidimensional features with a cooperative Z-test tree (ZTree). The framework employs low-complexity time-domain feature extraction, and the classification backend adopts a ZTree optimized by Z-statistical testing, which uses hypothesis testing confidence to automatically control decision tree splitting and size, ensuring efficient execution on resource-limited processors. Tested on ten 6G candidate waveforms including OFDM, OTFS, DSSS, LoRa, and NB-IoT, the method achieves 99.5% average accuracy under AWGN and 87.4% under TDL-C multipath channels, with main confusion between OTFS and LoRa. Implemented in C on an x86 platform, single inference latency is under 4~ms. To the best of our knowledge, this is the first work achieving real-time recognition of ten IoT waveform types. Future work will target deployment acceleration on embedded MCUs. Code and dataset are open-sourced at: https://github.com/Einstein-sworder/IoT-wave.

Edge machine learning presents a unique set of constraints not encountered in cloud-scale model deployment: strict memory budgets, limited compute, and non-negotiable accuracy thresholds must all be satisfied simultaneously. Existing compression and optimization techniques can trade one resource for another, but rarely improve both accuracy and model size at the same time. This paper presents the application of Perforated Backpropagation to keyword spotting on the Edge Impulse platform, an experiment that won the Best Model award at the Edge Impulse 2025 Hackathon in December 2025. By adding artificial Dendrite Nodes to a standard convolutional neural network trained on the Edge Impulse keyword spotting tutorial pipeline, we demonstrate that dendritic models outperform traditional architectures at every level of parameter count and at every accuracy threshold tested across 800 hyperparameter trials. The best dendritic model achieved a test accuracy of 0.933 with only 1,500 parameters, versus the baseline accuracy of 0.921 requiring approximately 4,000 parameters. These results suggest that Perforated Backpropagation is a powerful addition to the edge AI engineer's toolkit, offering simultaneous gains in both model quality and deployment efficiency.

Spiking neural networks (SNNs) are biologically inspired energy-efficient models that use sparse binary spike-based communication between neurons, making them attractive for resource-constrained edge devices. Federated learning enables such devices to train collaboratively without sharing raw data. In time-series applications, edge devices often collect data at different time resolutions due to hardware and energy constraints. This temporal heterogeneity poses a fundamental challenge for federated learning: parameters learned at one temporal resolution do not necessarily transfer directly to another, which might result in the naive federated averaging being ineffective. Targeting SNNs and, more broadly, deep networks with stateful neurons, we propose a federated learning framework that addresses this temporal resolution mismatch. We investigate how neuron parameters learned from data at different temporal resolutions and model aggregation should be integrated. We evaluate the proposed framework across two SNN-native benchmark datasets (SHD and DVS-Gesture) under a range of resolution heterogeneity scenarios. Our results show that the proposed adaptation methods can substantially recover accuracy lost due to temporal mismatch, hence enabling each client to train at their local temporal resolution while remaining compatible with the global model.

Edge object detection on embedded hardware requires balancing inference latency and detection quality under changing resource pressure. We present RAMS, a lightweight runtime controller that monitors device pressure, calibrates switching thresholds from idle behavior, and dynamically selects among three resident YOLOv8 tiers (NANO/SMALL/MEDIUM at 320/416/640 px) without model-reload latency. RAMS defines five switching policies, including two detection-conditioned variants that prevent aggressive downgrades after recent vulnerable-road-user (VRU) detections. We further introduce the VRU-Weighted Accuracy Score (SWAS), a scalar metric for offline policy comparison without ground-truth annotations, together with an oracle-bounded variant that separates detector circularity from genuine tier-retention benefit. Across Raspberry Pi 5, x86 laptops, and Jetson Orin ONNX/TensorRT deployments, the same controller equations operate over a 37x latency range. On Jetson Orin TensorRT under heavy load, the safety2 policy achieves 3.41 ms mean latency, 5.6x faster than fixed-MEDIUM inference, while retaining 74% of its proxy accuracy through near-NANO operation with selective SMALL and MEDIUM locks during VRU-positive windows. Detection-conditioned switching improves SWAS by 25.4% under oracle scoring and 47.3% under detector-derived scoring relative to threshold-only policies under heavy load. Live KITTI evaluation reports per-tier VRU recall of 24.2%, 41.2%, and 59.0%, showing that reactive overrides are fundamentally limited by baseline detector recall.

Modern edge devices increasingly rely on neural networks for intelligent applications. However, conventional digital computing-based edge inference requires substantial memory and energy consumption. In analog radio frequency (RF) computing, a base station (BS) encodes the weights of the neural networks and broadcasts the RF waveforms to the clients. Each client reuses its passive mixer to multiply the received weight-encoded waveform with a locally generated input-encoded waveform. This enables wireless receivers to perform the matrix-vector multiplications (MVMs) that account for most of the computation burden in edge inference with ultra-low energy consumption. Unlike conventional downlink transmissions which are optimized for communications, analog RF computing requires a computing-centric physical layer that controls both the analog MVM accuracy and the energy consumption for inference. Motivated by this, in this paper, we propose a physical layer design framework for analog RF computing in MU-MIMO wireless systems. We derive tractable models for computing accuracy and energy consumption for inference, formulate a joint BS beamforming and client-side scaling problem subject to computing accuracy, transmit power, and hardware constraints, and develop a low-complexity algorithm to solve the non-convex problem. The proposed design provides client- and layer-specific accuracy control for both uniform- and mixed-precision inference. Simulations under 3GPP specifications show that analog RF computing can significantly reduce client-side energy consumption by nearly two orders of magnitude compared to digital computing, while mixed-precision inference requires even lower energy consumption than uniform-precision inference. Overall, these results establish analog RF computing over wireless networks as a promising paradigm for energy-efficient edge inference.

Diabetic Retinopathy (DR) is one of the leading causes of preventable blindness, yet rural regions often lack the specialists and infrastructure needed for early detection. Although cloud-based deep learning systems offer high accuracy, they face significant challenges in these settings due to high latency, limited bandwidth, and high data transmission costs. To address these challenges, we propose a two-tier edge-cloud cascade on the public APTOS 2019 Blindness Detection dataset. Tier 1 runs a lightweight MobileNetV3-small model on a local clinic device to perform a binary triage between Referable DR (Classes 2-4) and Non-referable DR (Classes 0-1). Tier 2 runs a RETFoundDINOv2 model in the cloud for ordinal severity grading, but only on the subset of images flagged as referable by Tier 1. On a stratified APTOS test split of 733 images, Tier 1 reaches 98.99% sensitivity and 84.37% specificity at a validation-tuned high-sensitivity threshold. The default cascade forwards 49.52% of test images to Tier 2, reducing cloud calls by 50.48% relative to using a cloud-based model for all images. In the deployed 4-class output space (Class 0-1 / Class 2 / Class 3 / Class 4), the cascade obtains 80.49% accuracy and 0.8167 quadratic weighted kappa; the cloud-only baseline obtains 80.76% accuracy and 0.8184 quadratic weighted kappa. On APTOS, the cascade cuts cloud use by about half with a modest drop in grading performance. Index Terms: Diabetic Retinopathy, Edge-Cloud Cascade, MobileNetV3-small, RETFound-DINOv2, Retinal Screening, tele-ophthalmology

The multicut problem is an NP-hard combinatorial optimization problem with diverse applications in fields such as bioinformatics, data mining and computer vision. Graph neural networks have been defined for the multicut problem but can be adapted further to its specific objective function and constraints. In this article, we introduce such an adapted graph neural network architecture in which features are assigned only to edges, and the computation of messages is based on triangles in the underlying graph. Experiments with synthetic and real-world instances with up to 200 nodes show that our method outperforms state-of-the-art heuristic solvers in terms of solution quality while maintaining feasible runtimes. For some instances, our method finds optimal solutions in seconds whereas exact solvers need hours to find and certify optimal solutions.

Gesture recognition is a cornerstone of Human-Computer Interaction (HCI) for smart eyewear, enabling natural and device-free control in augmented reality environments. Traditional vision-based approaches face significant challenges regarding power consumption, computational latency, and user privacy. This paper proposes a lightweight, privacy-preserving gesture recognition system based on the fusion of low-resolution Time-of-Flight (ToF) and Infrared (IR) thermal sensors. We used an 8 times 8 multizone ToF sensor (VL53L8CH) and an 8 times 8 IR array (AMG8833) to capture complementary depth and thermal cues. A compact Convolutional Neural Network (CNN) with a specialized grouped-convolution architecture is designed to fuse these modalities efficiently on a microcontroller (MCU). Experimental results on a custom dataset of 7 static gestures, validated via k-fold cross-validation, demonstrate that the proposed fusion strategy significantly outperforms single-sensor baselines with an accuracy of 92.3% and a macro F1-score of 0.93. Finally, on-device benchmarks on STM32F4 and STM32H7 MCUs confirm the system's suitability for resource-constrained wearables, requiring only 6,343 parameters and achieving millisecond-level inference latency with a total system power of 50 mW.

Edge deployment of Vision-Language Models (VLMs) faces a tradeoff between latency and accuracy: cloud execution provides high-quality predictions but incurs communication delay and energy cost, while edge-only execution is faster but less accurate due to limited model capacity. This trade-off is further complicated by heterogeneity in image quality and reasoning complexity, making static placement suboptimal. We present INAR-VL, a lightweight edge-cloud routing system for multimodal inference in a two-tier deployment. INAR-VL maintains complementary VLMs across edge and cloud and uses lightweight image and text complexity signals to guide routing and model selection, executing simple queries locally while offloading complex ones when beneficial. Evaluation on visual question answering shows that INAR-VL executes 36% of requests on the edge, reduces latency by 24%, lowers energy by 26%, and preserves 97% of cloud-level accuracy.

Contextual bandits (CB) are online sequential decision-making problems under partial feedback that underpin many adaptive services. There is a growing demand to deploy CB agents directly on-device, under strict constraints on memory, compute, and energy. However, standard linear CB algorithms are often impractical for resource-constrained devices with their unfavorable scaling in computational and memory costs. Recently, HD-CB, a CB approach based on hyperdimensional computing principles, has been proposed to model and solve CB problems by moving into high-dimensional spaces. HD-CB offers faster convergence, favorable scalability, and improves memory efficiency compared to linear CB algorithms. However, its learning rule is accumulation-based: the values of action vectors grow over time, requiring high precision. While periodic binarization can prevent overflow in low-precision components, it may discard important information about magnitudes and degrade decision quality. This paper introduces probabilistic HD-CB, a low-precision variant that replaces deterministic accumulation with a probabilistic update rule. At each step, only a random subset of vector components is updated, with a time-decaying update probability, and component values are constrained to a predefined range [-k,+k]. This approach enables low-precision components, prevents overflow without periodic binarization, and reduces the expected update cost in proportion to the fraction of updated components. Off-policy evaluation on standardized synthetic CB benchmarks using the Open Bandit Pipeline shows that probabilistic HD-CB consistently outperforms binarized HD-CB at equal precision, while approaching the performance of HD-CB with as few as 3 bits per component.

In cloud manufacturing, unmanned aerial vehicles (UAVs) can support both product collection and mobile edge computing (MEC). This joint operation forms a hybrid scheduling problem, where physical logistics decisions are coupled with computational task scheduling. In this paper, UAVs collect finished products from manufacturing stations and transport them back to a central depot. Meanwhile, computational tasks generated by industrial sensor devices at these stations are processed locally, at UAVs, or offloaded via UAVs to the cloud. This coupling makes the problem challenging. A UAV can provide MEC services only during its service window at a station, so routing decisions directly determine when UAV-assisted offloading is available. Routing decisions also affect the UAV energy budget and the availability of onboard computing and communication resources for computational task execution under task deadline constraints. To address this, we propose an agentic-AI-assisted optimization framework with two components. First, we develop an agentic AI that combines large language models, retrieval-augmented generation, and chain-of-thought reasoning to translate user input into an interpretable mathematical formulation for the hybrid scheduling problem. Second, we design a hierarchical deep reinforcement learning approach based on proximal policy optimization (PPO), where the upper layer learns UAV routing and the lower layer optimizes per-slot task execution and resource allocation. Simulation results show that the proposed framework yields more consistent formulations, while the hierarchical PPO achieves full product collection in 99.6% of the last 500 episodes and maintains a 100% deadline satisfaction rate, with more stable performance than the advantage actor-critic approach.

As large language models (LLMs) move from centralized clouds to mobile edge environments, efficient serving must balance latency, energy consumption, and accuracy under constrained device-edge resources. Query-level routing between lightweight on-device models and stronger edge models provides a flexible mechanism to navigate this trade-off. However, existing routers are designed for centralized cloud settings and optimize token-level costs, failing to capture the dynamic latency and energy overheads in wireless edge deployments. In this paper, we formulate mobile edge LLM routing as a deployment-constrained, cost-aware decision problem, and propose CR^2, a two-stage device-edge routing framework. CR^2 decouples a lightweight on-device margin gate from an edge-side utility selector for deferred queries. The margin gate operates on frozen query embeddings and a user-specified cost weight to predict whether local execution is utility-optimal relative to the best edge alternative under the target operating point. We further introduce a conformal risk control (CRC) calibration procedure that maps each operating point to an acceptance threshold, enabling explicit control of the marginal false-acceptance risk under the full-information utility reference. Experiments on the routing task show that CR^2 closely matches a full-information reference router using only device-side signals before deferral. Compared with strong query-level baselines, CR^2 consistently improves the deployable accuracy-cost Pareto frontier and reduces normalized deployment cost by up to 16.9% at matched accuracy.

Agentic systems deployed across the compute continuum need discovery mechanisms that remain effective across cloud, edge, and intermittently connected domains. In some emerging agentic architectures, decentralized discovery is already an active design direction, placing DHT-based lookup on the path toward agent directories. This paper studies the trade-offs among major structured-overlay families for agent discovery, comparing Chord, Pastry, and Kademlia as candidate indexing substrates within a shared control-plane framework. Using a benchmark subset centered on a 4096-node stationary comparison and a representative 4096-node churn benchmark, the paper characterizes how discovery reliability, startup behavior, and control-plane overhead vary across these overlays. The goal is to clarify the operating points they expose for agent discovery across edge-to-cloud environments.

Hierarchical federated learning (HFL) leverages edge servers for partial aggregation in edge computing. Yet existing FL methods lack mechanisms for jointly optimizing cluster assignment and client selection under data heterogeneity. This paper proposes Fed-BAC, which integrates additive cluster personalization with a two-level bandit framework: contextual bandits at the cloud learn server-to-cluster assignments, while Thompson Sampling at each edge server identifies high-contributing clients. The additive decomposition enables the sharing of knowledge between groups through a globally aggregated network, while cluster-specific networks capture distribution variations. Across three classification benchmarks (CIFAR-10, SVHN, Fashion-MNIST) under moderate ($α= 0.5$) and severe ($α= 0.1$) Dirichlet non-IID partitioning, Fed-BAC achieves distributed accuracy gains of up to +35.5pp over HierFAVG and +8.4pp over IFCA, while requiring only 80% client participation, converging 1.5 to 4.8$\times$ faster depending on dataset and accuracy target, and improving cross-server fairness. These gains are further validated at 5$\times$ deployment scale on CIFAR-10. The advantage of Fed-BAC increases with heterogeneity severity, confirming that additive cluster personalization becomes increasingly valuable as data distributions diverge.

The EU Artificial Intelligence Act (Regulation 2024/1689), fully applicable to high-risk systems from August 2026, creates urgent demand for AI architectures that are simultaneously trustworthy, transparent, and feasible to deploy on resource-constrained edge devices. Brain-like neural networks built on the Bayesian Confidence Propagation Neural Network (BCPNN) formalism have re-emerged as a credible alternative to backpropagation-driven deep learning. They deliver state-of-the-art unsupervised representation learning, neuromorphic-friendly sparsity, and existing FPGA implementations that target edge deployment. Despite this momentum, no systematic framework exists for explaining BCPNN decisions -- a gap the present paper fills. We argue that BCPNN is, in the sense of Rudin's interpretable-by-design agenda, an inherently transparent model whose architectural primitives map directly onto established explainable-AI (XAI) families. We make four contributions. First, we propose the first XAI taxonomy for BCPNN. It maps weights, biases, hypercolumn posteriors, structural-plasticity usage scores, attractor dynamics, and input-reconstruction populations onto attribution, prototype, concept, counterfactual, and mechanistic explanation modalities. Second, we introduce sixteen architecture-level explanation primitives (P1--P16), several without analogue in standard ANNs. We provide closed-form algorithms for computing each from quantities the model already maintains. Third, we introduce five design-time Configuration-as-Explanation primitives (Config-P1 to Config-P5) that treat BCPNN hyperparameter choices as an auditable pre-deployment explanation artifact. Fourth, we sketch a roadmap for integration into industrial IoT deployments and discuss EU AI Act alignment, edge feasibility, and Industry 5.0 implications.

Local interaction laws governing multi-agent systems can be difficult to recover from trajectory data, even when the dynamics are observed faithfully. In systems governed by a nonlinear sheaf Laplacian -- a generalization of the graph Laplacian accommodating heterogeneous state spaces and asymmetric communication channels -- the coordination law is encoded by edge potential functions whose gradients produce the inter-agent forces. Because trajectory observations record node-state evolution, they expose only the aggregate effect of the edge forces at each node: distinct interaction laws that agree at the node level are indistinguishable from trajectory data alone. We show that the fundamental obstruction to recovery is topological, measured by sheaf cohomology, and that unique recovery from an unconstrained function class is possible if and only if this cohomology vanishes. When the obstruction is nontrivial, we show that recovery within a finite-dimensional parameterized class is possible precisely when a data-dependent information matrix is positive definite. Experiments validate the theory and illustrate that accurate trajectory reproduction need not certify recovery of the underlying interaction law.

Aging combined sewer systems in many historical cities are increasingly stressed by extreme rainfall events, which can trigger combined sewer overflows (CSO) with significant environmental and public health impacts. Forecasting the filling dynamics of overflow basins is critical for anticipating capacity exceedance and enabling timely preventive actions for CSO. We present a web-based demonstrator that integrates Deep Learning forecasting methods in both cloud and edge settings into an interactive monitoring dashboard for overflow monitoring, resilient to network outages. A video showcase is available online (https://cloud.bht-berlin.de/index.php/s/b9xt4T3SdiLBiFZ).

Agentic artificial intelligence (AI) is a natural fit for Internet of Things (IoT) and edge systems, but edge deployments are often constrained to models around 8 billion parameters or smaller. An important question is: How much agentic-task quality is lost when model size is constrained by memory, power, and latency budgets? To address this question, in this paper, we provide an initial empirical study considering edge-focused model scaling, general-purpose versus coder-oriented model effects, and tool-enabled execution under a fixed protocol. We introduce a domain-conditioned evaluation methodology, an implementation-grounded analysis of model-tool interactions, practical guidance for model selection under constraints, and an analysis of failure modes that reveals distinct semantic versus execution failure patterns across model families. Our core finding is that edge-agent quality is not a simple function of parameter count. Robust deployment depends on the joint design of model choice and tool workflow. Domain-conditioned analysis reveals Pareto fronts in the accuracy-latency space that can guide strategy selection based on operational priorities.

The Vision Transformer (ViT) achieves remarkable accuracy across visual tasks but remains computationally expensive for edge deployment. This paper presents MicroViTv2, a lightweight Vision Transformer optimized for real-device efficiency. Built upon the original MicroViT, the proposed model is designed based on reparameterized design, specifically Reparameterized Patch Embedding (RepEmbed) and Reparameterized Depth-Wise convolution mixer (RepDW) for faster inference, and introduces the Single Depth-Wise Transposed Attention (SDTA) to capture long-range dependencies with minimal redundancy. Despite slightly higher FLOPs, MicroViTv2 improves accuracy up to 0.5% compared to its predecessor and surpassing MobileViTv2, EdgeNeXt, and EfficientViT while maintaining fast inference and high energy efficiency on Jetson AGX Orin. Experiments on ImageNet-1K and COCO demonstrate that hardware-aware design and structural re-parameterization are key to achieving high accuracy and low energy consumption, validating the need to evaluate efficiency beyond FLOPs. Code is available at https://github.com/novendrastywn/MicroViT.

The recent growth of on-device Large Language Model (LLM) inference has driven significant interest in device-edge collaborative LLM inference. As a promising architecture, Speculative Decoding (SD) is increasingly adopted where a lightweight draft model rapidly generates candidate tokens to be verified by a powerful target model. However, a fundamental challenge lies in achieving per-token resource scheduling to effectively adapt SD paradigm to resource-constrained edge environment. This paper proposes a Generative Entropy- and Lyapunov-based Adaptive Token Offloading framework, named GELATO, to maximize decoding throughput under energy constraints in a device-edge collaborative SD system. Specifically, an outer drift-plus-penalty loop makes online decisions to establish a reference drafting budget, managing long-term energy-throughput trade-off. Further, a nested entropy-driven generation mechanism executes early exiting to adapt to per-token dynamic generative uncertainty. Theoretical analysis establishes a rigorous performance bound on long-term throughput for GELATO. Extensive evaluations demonstrate that GELATO achieves a globally optimal tradeoff, outperforming state-of-the-art distributed SD architectures by 64.98% in token throughput and reducing energy consumption by 47.47% under resource-constrained environments, while preserving LLM decoding quality.

We investigate the control and optimization of vertical federated learning (VFL), a class of distributed machine learning (ML) methods in which edge/fog devices contain separate data features, in dynamic edge/fog networks. Owing to heterogeneous data features and hardware across edge/fog networks, devices' contributions to VFL vary substantially, and, moreover, dynamic edge/fog networks can lead to the permanent exit or entry of select data features. In this setting, our proposed methodology, server controlled VFL in dynamic networks (SC-DN), first establishes the existence of a global first-order stationary point for every global round, and then leverages this result to jointly optimize ML model training and resource consumption based on four key control variables: (i) server placement, (ii) device-to-server transmit power, (iii) local device processor frequency, and (iv) local training iterations per global round. The resulting optimization formulation contains coupled variables as well as numerous forms of logarithmic constraints which we show is a mixed-integer signomial program, an NP-hard problem, and for which we develop a general solver. Finally, via experiments on both image and multi-modal datasets, we show that our methodology demonstrates superior classification/regression performance and resource consumption savings than even greedy methodologies.

Accurate air quality prediction is essential for public health, environmental monitoring, and industrial safety. However, most existing approaches rely on centralized learning paradigms, which introduce challenges related to scalability, privacy preservation, and communication overhead in distributed Internet of Things (IoT) environments. Moreover, current federated learning (FL) based solutions predominantly utilize unimodal data, limiting their capability to capture complex environmental patterns. To address these limitations, we propose M$^2$FedAQI, a lightweight multimodal federated framework for decentralized Air Quality Index (AQI) prediction across heterogeneous edge devices. The proposed framework integrates visual and tabular modalities through a feature modulation based fusion mechanism that enables efficient cross-modal interaction while maintaining low computational overhead. M$^2$FedAQI is evaluated on two benchmark datasets, PM25Vision and TRAQID, for both classification and regression tasks under centralized and federated settings. Experimental results demonstrate that M$^2$FedAQI consistently outperforms existing approaches, achieving improvements of up to 11.0% in Accuracy, 3.53% in AUC, 12.2% in F1-score, and 18.0% in $R^2$, while reducing MAE and RMSE by up to 25.4% and 20.4%, respectively, compared with the strongest baselines. Furthermore, deployment on heterogeneous edge devices demonstrates efficient resource utilization in terms of communication overhead, memory footprint, and computational cost. To enhance communication security, TLS-based authentication is incorporated to ensure secure client participation and protect the FL communication channel from unauthorized third-party access without modifying the underlying FL protocol.

In recent years, the use of artificial intelligence on resource-constrained IoT devices has grown significantly. However, existing approaches to DNN partitioning and offloading across the edge-cloud continuum typically rely on static methods that ignore runtime dynamics. Furthermore, they are often evaluated in simulated environments rather than on real hardware. To address this gap, we propose a framework that dynamically splits neural network layers across the heterogeneous continuum. The framework profiles the model at startup, measures network link conditions between nodes, and periodically re-evaluates the partition to adapt to environmental changes. We created a physical testbed comprising a Raspberry Pi edge device, a laptop fog, and a high-performance desktop PC as the cloud. We evaluated the framework over three widely adopted convolutional neural networks: VGG16, AlexNet, and MobileNetV2. Our results show that the framework achieves reductions in energy and end-to-end latency of 27.09--35.82% and 6.34--22.92%, respectively, compared to a static partitioning baseline. These findings confirm the superiority of adaptive to static partitioning.

As LLM-powered agents are increasingly deployed in edge-cloud environments, personalized memory has become a key enabler of long-term adaptation and user-centric interaction. However, cloud-assisted memory management exposes sensitive user information, while existing privacy protection methods typically rely on aggressive masking that removes task-relevant semantics and consequently degrades memory utility and personalization quality. To address this challenge, We propose MemPrivacy, which identifies privacy-sensitive spans on edge devices, replaces them with semantically structured type-aware placeholders for cloud-side memory processing, and restores the original values locally when needed. By decoupling privacy protection from semantic destruction, MemPrivacy minimizes sensitive data exposure while retaining the information required for effective memory formation and retrieval. We also construct MemPrivacy-Bench for systematic evaluation, a dataset covering 200 users and over 155k privacy instances, and introduce a four-level privacy taxonomy for configurable protection policies. Experiments show that MemPrivacy achieves strong performance in privacy information extraction, substantially surpassing strong general-purpose models such as GPT-5.2 and Gemini-3.1-Pro, while also reducing inference latency. Across multiple widely used memory systems, MemPrivacy limits utility loss to within 1.6%, outperforming baseline masking strategies. Overall, MemPrivacy offers an effective balance between privacy protection and personalized memory utility for edge-cloud agents, enabling secure, practical, and user-transparent deployment.

Continuous-time state estimation is gaining in popularity due to its abilities to provide smooth solutions, handle asynchronous sensors, and interpolate between data points. While there are two main paradigms, parametric (e.g., temporal basis functions, splines) and nonparametric (Gaussian processes), the latter has seen less adoption despite its technical advantages and relative ease of implementation. In this article, we seek to rectify this situation by providing a new simplified explanation of GP continuous-time estimation rooted in the language of factor graphs, which have become the de facto estimation paradigm in much of robotics. To simplify onboarding, we also provide three working examples implemented in the popular GTSAM estimation framework.

Neural Networks (NNs) have been widely adopted due to their outstanding efficacy and adaptability across computer vision and deep learning applications. The optimization of NNs is necessary to enable their deployment on energy constrained embedded devices, where the limited available energy poses a significant challenge for efficient inference. This paper presents a runtime reconfigurable multiplier architecture integrated into the RISC-V core, targeting energy efficient neural network inference and edge AI applications. The proposed multiplier supports adaptability for exact and approximate computation with multiple configurable accuracy levels via a dedicated mulscr, enabling fine-grained energy accuracy control within a standard processor pipeline. The proposed design achieves 44%-52% and 62%-68% power reduction in exact and approximate modes respectively, while maintaining the computational performance of 1.89 DMIPS/MHz. Evaluations on error-tolerant workloads including 2d convolution and matrix multiplication demonstrate up to 63% reduction in energy consumption, with the proposed design achieving 1.21 pJ/instruction for matrix multiplication, confirming its effectiveness for energy-constrained edge AI deployments.

Federated fine-tuning offers a promising paradigm for adapting large language models (LLMs) on edge devices by leveraging the rich, diverse, and continuously generated data from smartphones and IoT devices without compromising user data privacy. Such edge-side adaptation can improve model personalization, robustness, and responsiveness to local contexts. However, the practical feasibility of federated LLM fine-tuning on real edge devices remains unclear, as most existing work focuses on cross-silo or simulation-based settings, overlooking the resource and runtime constraints that determine whether a method is deployable on real edge systems. We present EdgeFlowerTune, a deployment-oriented benchmark for federated LLM fine-tuning under realistic edge-system constraints. EdgeFlowerTune jointly evaluates model quality and system costs, including communication, wall-clock latency, memory usage, energy consumption, and robustness to dynamic edge conditions. To compare methods in terms of effectiveness, efficiency, and robustness, EdgeFlowerTune introduces three complementary protocols: Quality-under-Budget, Cost-to-Target, and Robustness. We instantiate EdgeFlowerTune as a real-device platform built on Flower and MobileFineTuner, spanning commercial Android smartphones and NVIDIA edge development boards. Our benchmark results show that accuracy-only evaluation can lead to misleading conclusions: methods with similar final quality may differ substantially in deployability once realistic system constraints are considered. EdgeFlowerTune provides a reproducible benchmark for system-aware evaluation of federated LLM fine-tuning at the edge.

Device-free localization trains models from heterogeneous wireless and visual sensors (e.g., Wi-Fi, LiDAR) distributed across edge devices. Federated learning offers a privacy-respecting framework, but is brittle when clients differ in sensor modality and resolution, when their data distributions drift, and when privacy noise destroys the structural signal needed for localization. We propose UMEDA, a graph federated learning framework in which clients form nodes of a global graph that share a continuous integral operator, and aggregation is reformulated as spectral signal processing on this operator. Each client encodes its local sensors with a linear-attention layer whose kernel spectrum is low-rank filtered, suppressing modality-specific residuals so clients with different sensors align in a common low-rank subspace. The server then aggregates client updates via a diffusion model over the kernel's spectral coefficients, treating updates as discretizations of a shared operator rather than topology-bound weights -- this absorbs varying graph sizes and missing modalities without node-wise correspondence. To balance privacy and utility, we add an anisotropic differential-privacy mechanism that projects noise preferentially into the null space of the signal subspace, preserving dominant eigendirections while ensuring formal $(ε, δ)$-DP under gradient clipping. On MM-Fi and the RELI11D out-of-distribution benchmark, UMEDA outperforms state-of-the-art federated baselines in accuracy, convergence, and communication efficiency, particularly under high modality heterogeneity and tight privacy budgets.

The expanding application of smart sensing has created a growing demand for the accurate understanding of human action at the network edge. Traditional approaches require massive video data to be transmitted from resource-constrained edge devices to powerful cloud servers, incurring prohibitive uplink bandwidth consumption and unacceptable latency while raising privacy concerns. To overcome these bottlenecks, we propose a task-oriented communication framework for human action understanding (TOAU) through edge-cloud collaboration. Our framework utilizes a monocular pose estimator to extract continuous joint coordinates from raw videos, followed by a vector quantized variational autoencoder (VQ-VAE) to convert these coordinates into discrete motion tokens. Consequently, only a compact sequence of codebook indices is transmitted over the network, consuming as few as 9 bits per frame and avoiding privacy leakages. At the cloud server, a lightweight projector aligns these motion tokens with the embedding space of a large vision-language model (VLM) to facilitate complex action understanding, which is trained with an efficient instruction tuning paradigm. Comprehensive evaluations on three benchmarks demonstrate that our TOAU system reduces the transmission payload to approximately 1% and the system latency to around 20% compared to video codec-based solutions, while delivering comparable action understanding accuracy.

Mobile devices face diverse resource constraints and non-IID data class distributions, requiring fast on-device inference for local in-distribution (ID) classes and on-demand remote support for client-specific out-of-distribution (OOD) classes. Hybrid split federated learning (Hybrid SFL) couples personalized client-side front ends (supporting early exit) with a generalized server-side backend for fallback inference, balancing accuracy and cost. However, under client architectural heterogeneity, the existing hybrid SFL suffers from representation skew, where features from customized extractors fail to align in the shared space, leading to a sharp degradation in the server model responsible for OOD prediction. We propose HARMONY, the first hybrid SFL framework to support heterogeneous client architectures. HARMONY modifies meta-learning to simulate diverse extractors across parameters and architectures, and to learn to personalize. To mitigate representation skew, HARMONY conducts server-side contrastive learning to align extracted features, neither sacrificing clients' personalization nor sharing raw labels. Compared to the state of the art across multiple datasets and model families, HARMONY improves test accuracy by up to 43.0%/28.3% without/with OOD, respectively, while maintaining acceptable latency.

Evaluating Computer Use Agents (CUAs) on interactive environments is fraught with methodological pitfalls that the field has yet to systematically address. We show that a 1MB replay script that blindly executes a recorded action sequence without ever observing the screen outperforms frontier models on prominent static benchmarks, and prove that its expected success rate is exactly equal to the source agent's pass@k in deterministic environments. We trace this and other failures to two root causes: non-principled environment design (static, unsandboxed, or unreliably verified environments) and non-principled evaluation methodology (naive aggregation and misuse of pass@k for stateful UI interactions). To address the first, we propose PRISM, five design principles for CUA environments (privileged verification, realistic environments, integrity-checked configurations, sandboxed execution, and multifactorial variability) and instantiate them in DigiWorld, a benchmark of 15 realistic sandboxed mobile applications able to evaluate agents in over 3.2 million verified unique configurations. To address the second, we develop an aggregation framework pairing Wilson score intervals with hierarchical bootstrap, producing confidence intervals that correctly account for the nested structure of CUA benchmarks, as we empirically demonstrate. All together, we show that principled environment design and rigorous evaluation methodology are not optional refinements but prerequisites for meaningful CUA research.

Object detection on heterogeneous edge devices must satisfy strict energy, latency, and memory constraints while still providing reliable perception for downstream autonomy. Existing energy-aware NAS methods often target limited deployment settings, while real energy remains difficult to optimize because it is highly device-dependent and costly to measure. We address these challenges with an energy-adaptive framework that combines an energy-aware XiResOFA search space, a two-stage energy estimator, and iterative search to identify a single energy-efficient base architecture. We then apply compound scaling to transform this base design into the XiYOLO family across deployment budgets, enabling interpretable accuracy-energy tradeoffs under sparse hardware measurements. Experiments on PascalVOC, COCO, and real-device deployment show that XiYOLO achieves a stronger energy-accuracy tradeoff than YOLO baselines. On PascalVOC, the medium XiYOLO model reaches 86.15 mAP50 while reducing energy relative to YOLOv12m by 20.6% on GPU and 35.9% on NPU. On COCO, XiYOLO reduces energy relative to YOLOv12 by up to 53.7% on GPU and 51.6% on NPU at the small scale. The proposed two-stage estimator also improves sample efficiency over a joint predictor under few-shot adaptation with only 2-20 target-device samples.

Cohen et al. (arXiv:2207.14484) observed that adaptive gradient methods such as Adam operate at the edge of stability. While there has been significant work on continuous-time modeling of gradient descent at the edge of stability, extending these models to momentum methods remains underdeveloped. In the gradient descent setting, Regis et al. (arXiv:2602.01480) introduced rod flow, which models consecutive iterates as an extended one-dimensional object -- a "rod." Here we extend rod flow to Adam by working in the joint phase space of parameters and first moment $(w, m)$ and treating the second moment $ν$ as a smooth auxiliary variable. We also develop rod flows for heavy ball momentum, Nesterov momentum, and scalar and per-component versions of RMSProp, Adam, and NAdam. For all eight optimizers, we empirically evaluate rod flow on representative machine learning architectures, where it tracks the discrete iterates through the edge-of-stability regime significantly more accurately than the corresponding stable flow.

Power-of-two (PoT) quantization significantly reduces the size of deep neural networks (DNNs) and replaces multiplications with bit-shift operations for inference. Prior work has shown that PoT-quantized DNNs can preserve accuracy for tasks such as image classification; however, their performance on resource-constrained edge devices remains insufficiently understood. While general-purpose edge CPUs and GPUs do not provide optimized backends for bit-shift operations, custom hardware accelerators can better exploit PoT quantization by implementing dedicated shift-based processing elements. However, deploying PoT-quantized models on such accelerators is challenging due to limited support in existing inference frameworks. In addition, the impact of different PoT quantization strategies on hardware design, performance, and energy efficiency during full inference has not been systematically explored. To address these challenges, we propose PoTAcc, an open-source end-to-end pipeline for accelerating and evaluating PoT-quantized DNNs on resource-constrained edge devices. PoTAcc enables seamless preparation and deployment of PoT-quantized models via TensorFlow Lite (TFLite) across heterogeneous platforms, including CPU-only systems and hybrid CPU-FPGA systems with custom accelerators. We design shift-based processing element (shift-PE) accelerators for three PoT quantization methods and implement them on two FPGA platforms. We evaluate accuracy, performance, energy efficiency, and resource utilization across a range of models, including CNNs and Transformer-based architectures. Results show that our CPU-accelerator design achieves up to 3.6x speedup and 78% energy reduction compared to CPU-only execution for PoT-quantized DNNs on PYNQ-Z2 and Kria boards. The code will be publicly released at https://github.com/gicLAB/PoTAcc

Motion blur restoration on consumer mobile devices is typically evaluated using aggregate metrics that obscure performance variation across blur difficulty, masking model behavior under real deployment conditions. This work introduces iPhoneBlur, a difficulty-stratified benchmark of 7,400 image pairs synthesized from high-framerate iPhone 17 Pro videos captured in diverse real-world scenarios. Samples are partitioned into Easy, Medium, and Hard categories through PSNR-guided adaptive temporal windowing, with stratification validated by monotonic 2.2x increase in optical flow magnitude across tiers. Each sample includes comprehensive metadata enabling investigation of ISP-aware and difficulty-adaptive restoration strategies. Spectral analysis confirms synthesized blur exhibits high-frequency suppression patterns consistent with authentic motion degradation. Evaluation of six architectures reveals consistent 7-9 dB performance degradation from Easy to Hard subsets, a substantial gap entirely hidden by aggregate reporting. The benchmark further exposes a domain gap between professional and consumer cameras which targeted fine-tuning substantially recovers. By coupling difficulty stratification with deployment-critical metadata, iPhoneBlur enables systematic assessment of model reliability and failure modes for resource-constrained edge systems.

Edge learning refers to training machine learning models deployed on edge platforms, typically using new data accumulated onboard. The computational limitations on edge devices affect not only model optimisation, but also calculation of the predictive uncertainty of the current model on the unlabelled data, which is vital for informing model updating. In this paper, we investigate edge learning in the context of performing deep image regression on a remote sensing satellite, where a deep network is executed by an onboard computer to regress a scalar $y$ from an input image, e.g., $y$ is the percentage of pixels indicating cloud coverage or land use. We propose an uncertainty-guided edge learning (UGEL) algorithm that can accurately prioritise the data to speed up training convergence of the on-board regression model. Underpinning UGEL is the calculation of predictive uncertainty based on deep beta regression, where a deep network is used to estimate the parameters of a beta distribution for which the target $y$ for an input image has a high likelihood. Compared to established methods for uncertainty estimation that are either too costly on edge devices (e.g., require many forward passes per sample) or make strict assumptions on the predictive distribution (e.g., Gaussian), deep beta regression is computable in a single forward pass and allows more general predictive distributions. Results show that UGEL delivers faster-converging edge learning than active or semi-supervised learning. Code and models are publicly available at https://github.com/anh-vunguyen/UGEL.

Edge deep learning, a paradigm change reconciling edge computing and deep learning, facilitates real-time decision making attuned to environmental factors through the close integration of computational resources and data sources. Here we provide a comprehensive review of the current state of the art in edge deep learning, focusing on computer vision applications, in particular medical diagnostics. An overview of the foundational principles and technical advantages of edge deep learning is presented, emphasising the capacity of this technology to revolutionise a wide range of domains. Furthermore, we present a novel categorisation of edge hardware platforms based on performance and usage scenarios, facilitating platform selection and operational effectiveness. Following this, we dive into approaches to effectively implement deep neural networks on edge devices, encompassing methods such as lightweight design and model compression. Reviewing practical applications in the fields of computer vision in general and medical diagnostics in particular, we demonstrate the profound impact edge-deployed deep learning models can have in real-life situations. Finally, we provide an analysis of potential future directions and obstacles to the adoption of edge deep learning, with the intention to stimulate further investigations and advancements of intelligent edge deep learning solutions. This survey provides researchers and practitioners with a comprehensive reference shedding light on the critical role deep learning plays in the advancement of edge computing applications.

Visual SLAM is a core component of spatial computing systems, yet deploying learned local feature extractors on microcontroller-class hardware remains challenging due to memory, bandwidth, and quantization constraints. While modern neural descriptors provide strong robustness, their practical adoption is often hindered by system-level bottlenecks that are not captured by FLOP-based efficiency metrics. In this work, we introduce Gideon, a hardware-aware neural feature extractor explicitly designed for resource-constrained devices. Our approach combines relational knowledge distillation from a SuperPoint teacher with differentiable neural architecture search (DNAS) under strict memory and operator constraints. Unlike conventional design pipelines, we treat quantization stability and dynamic-range compactness as first-class objectives. We show that architectural choices such as replacing Batch Normalization with affine layers significantly improve INT8 robustness, and that descriptor dimensionality directly governs quantization resilience. Deployed on STM32N6, Gideon achieves 9.003 ms inference time (111 fps) while remaining below a 1.5 MB memory footprint. Remarkably, INT8 quantization induces negligible degradation and occasionally matches full-precision performance. These results demonstrate that robust learned feature extraction can be reconciled with embedded hardware constraints through holistic hardware-algorithm co-design.

Physical neural networks (PNNs) exploit diverse physical substrates---spanning molecular, wetware, and solid-state devices---to perform embodied neural computation close to physical processes. However, their operational heterogeneity in signal modalities, timing regimes, reset requirements, calibration lifecycles, and observability prevents their integration as interchangeable execution endpoints in edge, fog, and cloud workflows. We present CP$^2$N$^2$, a substrate-aware control-plane architecture that bridges software-level orchestration and physical neural computing. CP$^2$N$^2$ introduces a three-plane model that decouples high-level orchestration, twin-state synchronisation, and substrate-specific execution under versioned Physical Neural Resource Contracts. It extends Model Context Protocol (MCP)-style discovery and invocation with explicit lifecycle management, atomic leases, telemetry freshness verification, and fail-closed safety boundaries. We evaluate a reference prototype across contrasting behavioural twins, a same-host multi-process deployment under fault injection, and the Cortical Labs SDK Simulator. In a 945-request concurrency campaign, CP$^2$N$^2$ enforces typed contention and fail-closed recovery with sub-millisecond local orchestration overhead. Furthermore, in a 160-decision Agent-to-PNN campaign with a hosted LLM planner, independent enforcement ensured that 100% of executed actions remained strictly safe, verified, and reconciled despite planner-level inconsistencies. CP$^2$N$^2$ thus provides an enforceable systems abstraction for integrating scarce, stateful physical AI substrates into agentic computing environments.