Robotic Manipulation

Dexterous in-hand manipulation requires continuous 6D pose tracking, yet the manipulating fingers inevitably occlude the object from the camera. We study how to structure the sparse haptic signals already available on multi-fingered hands, including proprioception, proximal force/torque, and binary contact, to complement a pretrained visual pose tracker under occlusion. We propose a kinematic-aware finger-level encoder and systematically compare it against four alternative designs through three levels of evaluation: per-frame refinement, sequential open-loop tracking, and closed-loop manipulation. Our experiments reveal that (i) per-frame evaluation cannot distinguish encoder quality, while sequential tracking amplifies architectural differences by up to 15 times; (ii) the structured encoder learns task-specific cross-modal gating, using vision exclusively for translation and dedicating one attention head to haptics for rotation, without explicit supervision; and (iii) compact finger-level tokenization with 4 tokens outperforms both flat fusion and joint-level representations, which suppress vision through norm dominance. We validate that improved tracking yields higher success in a downstream reorientation task and provide qualitative real-world demonstrations. Our project page is available at https://cold-young.github.io/kine-fuse/.

Contact-rich manipulation requires policies to infer interaction state from signals that are often weakly observable through vision and kinematics alone. Action Chunking with Transformers (ACT) has shown strong performance in fine-grained manipulation, but many deployments collect demonstrations through leader-follower teleoperation, where tracking error between commanded leader motion and executed follower motion implicitly encodes contact, resistance, and constraint violation. This paper examines whether ACT's apparent force-awareness depends on this hidden interaction cue. We introduce an observation-centric ACT variant that predicts future follower joint states instead of leader commands, thereby removing the teleoperation-induced discrepancy signal while preserving the rest of the learning pipeline. We then evaluate whether simple joint-torque proxies, derived from onboard motor current or joint effort, can recover contact-aware behavior without external force/torque sensors. Across four real-world tasks spanning surface following, insertion, stiffness discrimination, and force-based stopping, removing the implicit cue leads to severe failures in force-critical phases. In contrast, torque-augmented policies recover robust contact behavior and improve the base ACT policy. These results demonstrate that, on real hardware, the implicit teleoperation cue is a recoverable source of force-awareness, where torque signals are available, a simple proxy matches, surpasses, or further enhances it.

Generalist robot manipulation policies trained on large, diverse datasets have shown remarkable promise across a wide range of tasks. However, rigorously evaluating these policies remains a fundamental challenge. Real-world performance depends on a large combinatorial space of task factors including object poses and camera viewpoints, making full, exhaustive evaluation intractable. Additionally, real hardware evaluation is slow and resource-intensive, so current practice is to use narrow test suites that can miss critical failure modes and misrepresent true deployment readiness. We propose an active evaluation framework that addresses this challenge by treating policy evaluation as a sequential experimental design problem. Our approach fits a probabilistic surrogate model over a structured space of task factors and adaptively selects evaluation configurations to maximize information gain over the policy's performance distribution, allowing for sample-efficient characterization of policy behavior across unseen conditions and a systematic identification of failure-prone regions. We conduct 2331 real-world evaluations across 3 tasks with 3 factor variations and find that our approach typically saves the evaluator at least 20-40% of trials compared to typical random testing.

Learning from demonstration (LfD) enables robots to learn manipulation skills directly from expert demonstrations but remains challenging for contact-rich tasks involving geometric constraints and force interaction. Existing approaches typically require multiple complete demonstrations and do not support reverse skill execution. In this paper, we present a unified one-shot framework for constrained manipulation that learns both forward and reverse execution from a single, possibly unfinished demonstration. Our method decomposes demonstrations into non-contact and contact phases, with non-contact motion encoded with dynamic movement primitives (DMP), and contact motion represented as a sequence of screw motion primitives segmented by our proposed geometry-driven twist-direction segmentation algorithm. During execution, screw primitives are executed sequentially under admittance-guided pose correction and speed regulation, enabling task completion beyond the demonstrated trajectory length as well as reverse skill execution without additional learning data. Experiments on peg insertion, battery insertion, lock opening, and screw driving tasks demonstrate improved success rates and robustness over segmentation and one-shot trajectory learning baselines. Details are available on the project website: https://tuwien-asl.github.io/LfD-Screw/.

Robotic manipulation poses fundamental challenges due to uncertainty, long-horizon execution, and compounding errors, which can easily destabilize execution and lead to task failure. Although recent vision-language-action (VLA) models exhibit strong generalization, they typically lack explicit mechanisms to assess execution stability and to recover when execution deviates from its nominal behavior. In this paper, we propose: (1) two complementary metrics to assess execution quality at runtime, and (2) an agentic reinforcement learning framework that learns to restore effective execution through high-level decision-making rather than directly learning low-level actions. In this framework, an agentic policy reasons over recent execution history and selects among a small set of execution modes to regulate the execution process. Under execution degradation, it triggers appropriate recovery mechanisms to restore the robot to previously visited nominal states, enabling the task to continue. We evaluate the proposed method on the LIBERO benchmark, achieving up to a 13.7% improvement in success rate under standard settings and up to a 39.2% improvement under disturbance settings, demonstrating substantially enhanced execution robustness.

Selective harvesting in clustered strawberry environments is challenging because ripe fruits are often occluded by surrounding unripe fruits, making direct grasping unreliable. To address this problem, this paper proposes a hierarchical reinforcement learning framework, termed VGPA, which integrates a vision-guided decision mechanism and a Progressive Adaptive Exploration Strategy (PAES) for vision-based obstacle separation and harvesting. The task was decomposed into two sequential stages: obstacle separation and target grasping. At the high level, the vision-guided mechanism improved option selection and accelerated policy convergence. At the low level, PAES improved exploration efficiency and training stability during continuous control learning. In simulation experiments, the learned policy achieved a success rate of 96.7%. In addition, sim-to-real transfer experiments on a self-developed parallel robot showed that the proposed method achieved success rates ranging from 71.7% to 88.3%, outperforming direct picking while requiring only 1.22~s more average harvesting time. These results verified the effectiveness, generalization ability, and practical potential of the proposed method for robotic harvesting in complex clustered environments.

In recent years, there has been growing interest in robust robotic systems for precise bin-picking applications. To achieve reliable performance, such systems must address errors arising from both the object pose estimation and the grasping process. Although various approaches have been proposed, they typically target specific challenges and do not offer general solutions. In this paper, we present a modular framework that jointly handles both error types. The framework incorporates object pose distribution estimation to account for pose uncertainty, which frequently arises in situations with ambiguous observations where a single correct pose cannot be determined. To further reduce uncertainty, we introduce a second-viewpoint module that computes complementary pose distributions, which are subsequently fused. This fusion decreases overall uncertainty and improves system efficiency. Additionally, two independent modules are included to compensate for grasping errors. The modular design allows the components to be combined for optimal performance or used individually, depending on the physical setup. The proposed method is evaluated in a real-world setup with three different objects, with no errors, and all modules are shown to improve efficiency. These results suggest that incorporating pose distributions with grasping pose errors is a promising direction for developing more flexible and reliable robotic production systems. To the best of our knowledge, this is the first framework that jointly addresses both grasping and object pose uncertainties using interchangeable modules. We believe there is ample opportunity to integrate additional modules, resulting in improved performance and flexibility. The current framework is limited to pose uncertainties in SO(2), but it could be extended to SE(3), enabling additional modules to improve the system.

Robots operating in human-robot collaboration must communicate not only their intended actions but also uncertainty arising from incomplete or ambiguous perception. This work introduces a mathematical framework for expressing perceptual uncertainty through robotic manipulator motion. Drawing on Laban Movement Analysis, robot behavior is organized in a Commitment-Vigilance state space that maps uncertainty-related states - confidence, curiosity, hesitance, fear, and inactivity - to distinct Laban Effort signatures. Five motion primitives - approach, pause, retreat, exploration, and oscillation - are then parameterized using eleven kinematic and geometric descriptors, including acceleration, pause and retreat characteristics, gaze angles, tilt, and shiver amplitude. A video-based human-subject study evaluated recognition of four expressive trajectories and the influence of individual descriptors on perceived intensity. Participants reliably identified the intended behavioral states, while several descriptors significantly modulated expressiveness. The results establish a perceptually grounded basis for encoding robot uncertainty in motion and support future autonomous trajectory generation using parametric movement representations for collaborative tasks in shared environments. Code, videos, questionnaire and appendices are available at "https://bit.ly/github-aou".

Multi-robot-arm motion planning is a key challenge in deploying multiple manipulators for industrial tasks such as manufacturing. Existing search-based and sampling-based solvers often require significant computation time to produce collision-free, high-quality motions suitable for safe real-world execution. In this work, we introduce a new suite of multi-robot-arm motion planners capable of near real-time motion generation, combining classical planning algorithms with state-of-the-art vectorized collision-checking techniques. Based on CPU SIMD instructions, our new planners accelerate their primary bottleneck, collision checking, and achieve up to two orders of magnitude speedup in both motion planning and execution postprocessing for multi-arm manipulation tasks. We also release our implementation to lower the barrier for research and development of multi-robot-arm planning and manipulation problems. Code is available at https://vamp-mr.github.io/vamp-mr

High-quality teleoperation datasets are costly to collect, particularly for hard tasks. We observe that many tasks exhibit directional asymmetry: completing the forward hard task is difficult, whereas reversing it by relaxing or disrupting the environment is comparatively easy. This suggests that reversed easy-task trajectories can serve as a scalable supervision signal for the hard task, reducing the cost of manual demonstration collection. However, reversed data can be noisy, and directly training on it may yield suboptimal policies. To enable largely automated acquisition and effective use of reversed data, we propose a teleoperation-cost effective framework for hard policy learning via temporal reversal of easy tasks, consisting of three key components: a closed-loop data collection pipeline that alternates between hard-task and easy-task policies to autonomously reset the environment and generate diverse trajectories; a hierarchical data refinement pipeline that temporally inverts easy-task rollouts and filters low-quality motion using kinematic priors and a critic-guided advantage filter; and an iterative policy learning method that trains the hard-task policy using both initial reversed easy-task demonstrations and the filtered reversed data in a continuous online learning loop. By combining automated collection, hierarchical refinement, and iterative learning, our method enables scalable, reliable training of complex, high-precision manipulation tasks. Across two simulated benchmarks and real-robot experiments, we demonstrate that our method improves hard-task success rates with higher data efficiency and more stable training compared to reversal-based and reinforcement-learning baselines, without requiring extensive hard-task teleoperation.

Reinforcement learning holds great promise for improving robot policies beyond the limits of imitation learning. However, its practical adoption remains bottlenecked by the lack of reliable vision-language reward models that provide dense and informative feedback. Two key challenges remain: acquiring diverse failure data at scale and obtaining fine-grained reward signals beyond sparse trajectory-level success labels. Collecting failure trajectories typically requires laborious human effort, while pseudo-failures constructed by relabeling successful demonstrations fail to capture the diverse physical failure modes that arise during robot execution. Meanwhile, existing reward models often predict sparse binary or trajectory-level rewards, which provide limited guidance for efficient policy optimization. We introduce DenseReward, a dense robotic reward model that addresses both challenges. To train DenseReward, we develop an automated failure data generation pipeline that synthesizes physically realistic failure trajectories in simulation without human labeling, covering diverse failure modes such as collisions, missed grasps, object drops, and recovery behaviors. DenseReward predicts dense frame-level reward scores from visual observations and language instructions, enabling fine-grained estimation of task progress throughout an episode. Experiments show that DenseReward outperforms general-purpose VLMs and existing robotic reward models in dense reward prediction across both simulated and real-world manipulation. We further demonstrate that DenseReward provides effective reward guidance for downstream model predictive control and reinforcement learning. We release the dataset, trained reward models, and evaluation suite to support the development of failure-aware dense reward modeling for robot learning.

World Action Models (WAMs) are able to leverage pretrained video generators for both world modeling and action prediction. However, directly leveraging such video generators for control raises a new challenge: how to represent actions in a suitable form that aligns with pretrained video generators while carrying enough motion cues for accurate control. Existing numerical actions fail to satisfy the former, and prior visual action representations overlook the temporal motion structure across frames. We address this issue with FlowWAM, a dual-stream diffusion framework that adopts optical flow as a unified, video-native action representation. Flow videos share the same format as RGB videos and encode rich per-pixel displacement. By jointly modeling them within a shared pretrained video generator, FlowWAM can naturally implement two modes of WAMs. In policy mode, FlowWAM generates flow for action prediction, while in world-model mode, it uses target flow sequences to guide future video generation. Moreover, since flow can be easily extracted from raw videos without action labels, FlowWAM can leverage large-scale action-unlabeled video datasets for pretraining. We empirically find that our flow-based action representation delivers gains across both modes. On RoboTwin manipulation, FlowWAM raises the success rate to 92.94% on the Clean setting and 92.14% on Random, outperforming both VLA and WAM baselines. On WorldArena world modeling, it achieves the best overall EWMScore (63.71) with an 18.4% relative improvement in trajectory accuracy. More results can be found on our project website: https://flow-wam.github.io .

Reinforcement Learning (RL) has demonstrated significant potential for improving Vision-Language-Action (VLA) models on complex manipulation tasks. However, its practical scalability remains severely limited by the substantial cost of environmental interactions. In this work, we first investigate the exploration stagnation bottleneck in current VLA-RL frameworks and reveal that trajectory diversity is fundamentally more important to sample efficiency than the sheer quantity of collected rollouts. Motivated by these insights, we introduce RL Exploration Token (ExToken), a simple yet general framework that condition VLA policies on discrete behavioral priors derived from offline demonstrations for structured exploration. By conditioning the policy on different tokens during rollout collection, ExToken encourages the agent to explore diverse behavioral modes, substantially improving state-action coverage and exploration efficiency. To bridge exploration during training with deterministic inference at deployment, ExToken further incorporates a state-conditioned token selector that adaptively predicts effective behavioral modes for unseen scenarios. Extensive experiments across simulated and real-world robotic manipulation tasks demonstrate that ExToken consistently accelerates convergence, improves task performance, and exhibits strong robustness under highly constrained interaction budgets.

Vision-Language-Action (VLA) models exhibit strong generalization for robotic manipulation, yet their high inference latency limits real time deployment. We identify two primary sources of temporal redundancy in existing VLA pipelines: repeated visual encoding of highly similar consecutive frames and multi step iterative sampling in diffusion based policies. To address this, we propose a system level acceleration strategy that reduces computation in both perception and action generation. On the perception side, we incrementally update only tokens corresponding to dynamic scene regions instead of re-encoding entire frames. On the policy side, we compress diffusion sampling into a compact 2-step schedule through efficiency oriented training while preserving action precision. Experiments on Libero, RobotWin, and Real Robot Platforms demonstrate over 2 times speedup while maintaining high performance, achieving up to 98% success rate on general manipulation benchmarks. Our codes will be released on Github.

Spacecraft attitude control is traditionally achieved using momentum exchange devices or propellant-consuming thrusters. Meanwhile, a growing number of missions require robotic manipulators, which are typically treated as disturbance sources to be rejected rather than as actuators for spacecraft reorientation. This work investigates the use of manipulator motions for propellant-free attitude control by formulating a trajectory optimization problem with critical joint and collision avoidance constraints. Using an interior point solver for the resulting nonlinear program, complex slew and detumble trajectories are demonstrated for a range of spacecraft-manipulator systems with varying kinematic complexity and mass properties. The achievable control authority is compared directly with that of reaction wheel arrays via momentum and torque envelopes, demonstrating the potential for manipulators to serve as redundant or even primary attitude control systems. This work provides a framework for using manipulators as multipurpose attitude control actuators, with particularly promising applications in in-space assembly and manufacturing when grasping payloads with high relative mass fractions.

Recent work in humanoid whole-body control has found success with a simple recipe: retarget human motion to robot kinematic references, then train policies via reinforcement learning (RL) to track them. But how does this recipe transfer to dexterous manipulation? The answer is not obvious, as manipulation involves complex, contact-rich dynamics and requires delicate regulation of contact modes and forces. We present REGRIND, a minimalist retargeting-guided RL pipeline that learns dexterous manipulation policies from a single human demonstration. REGRIND retargets human hand-object motion to a robot reference that preserves hand-object spatial and contact relationships, trains a residual RL policy in simulation to track object-centric keypoints along that reference, and transfers the resulting policy zero-shot to hardware with careful system identification. The resulting policies produce fluid, human-like behavior on two different multi-fingered hands across contact-rich tool-use tasks, including operating a pair of scissors and turning a screwdriver. Through systematic hardware experiments, we identify and analyze the key factors that govern sim-to-real transfer in dexterous manipulation, offering practical guidance for retargeting-based learning in contact-rich settings. Videos and code are available at https://yunhaifeng.com/REGRIND.

Robot-assisted endovascular intervention can potentially reduce radiation exposure, improve surgeon ergonomics, enable telesurgery, support active assistance and autonomy, and enhance procedural precision. However, existing systems often suffer from limited procedural coverage because constrained patient-side setups, restricted flexibility, and complex instrument exchange hinder clinical workflow integration. This work presents a compact robotic system for endovascular interventions that enables continuous translational and rotational manipulation of standard endovascular instruments. The system consists of two alternating carts with pneumatically actuated membrane grippers integrated into rotating gripper gears. Its top-loading design allows rapid exchange of instruments such as guidewires and catheters without changing the robotic setup. A leader-follower control strategy enables continuous motion despite the finite stroke of each cart. The system was evaluated in motion-tracking experiments with guidewires and catheters and in an in vitro vascular phantom. The motion-tracking experiments showed generally smooth translational and rotational motion profiles. Across all tested guidewire and catheter experiments, the mean relative tracking errors were 3.6% for translational motion and 4.1% for rotational motion. In the vascular phantom, robot-assisted navigation reached the target in most trials, demonstrating the feasibility of the proposed manipulation concept under in vitro conditions. The presented robotic system demonstrates technical feasibility for continuous manipulation of standard endovascular instruments in bench-top and in vitro experiments. The compact top-loading design may ease instrument exchange and clinical workflow integration. Future work will focus on improving gripping performance, actuation speed, force feedback, and evaluation in more clinically realistic settings.

Vision-language-action (VLA) models require 3D spatial reasoning, yet RGB observations encode robot-object geometry only implicitly. Lifting depth with camera intrinsics makes this geometry explicit as dense, image-aligned pointmaps, but their camera-frame coordinates depend on camera placement. We propose SeeR-VLA, which transforms pointmaps into a robot-centric frame with an end-effector origin and robot-base-aligned axes. An encoder initialized from pretrained RGB weights extracts pointmap features, which are added to corresponding RGB tokens without increasing the token count. Across 24 RoboCasa tasks and four real-world tasks, SeeR-VLA improves average success over RGB-only $π_{0.5}$ by 6.4 and 32.5 percentage points, respectively. It also exceeds the strongest evaluated 3D-augmented baseline, PointVLA, by 3.5 and 23.7 percentage points, respectively. Beyond these gains, our ablations clarify how coordinate choices affect VLA performance, showing that end-effector centering is most effective with robot-base-aligned axes. The benefits grow as training viewpoints diversify, highlighting the importance of using robot-frame pointmaps when learning from diverse camera configurations.

Learning effective action representations is critical for robotic manipulation, where raw control trajectories are often noisy, redundant, and difficult to model directly. Existing methods mainly encode the structure of the action stream itself, treating the role of actions in the environment as implicit. Yet manipulation is about changing the world: the same action segment can induce different outcomes under different scene contexts, making action semantics inherently environment-dependent. We propose EDAR, an Environment-Dependent Action Representation that grounds action tokens in both executable control structure and expected visual consequences. By coupling motor commands with their environment-conditioned effects, EDAR encourages the learned action space to capture interaction semantics rather than merely command-level patterns. Experiments on simulated and real-robot manipulation benchmarks demonstrate that EDAR improves downstream policy learning, especially in long-horizon manipulation. These results highlight the importance of grounding action representations in executable control structure and environment-conditioned visual change.

Representing manipulation actions as 2D trajectories in the camera plane provides a compact and interpretable basis for learning complex 3D manipulation policies. However, it also creates challenges from out-of-frame trajectories and limited precision. We propose Pix2Act, an imitation learning method that addresses these challenges by generating continuous image-space keypoint trajectories in each camera plane and losslessly recovering end-effector poses via triangulation. This reformulates high-dimensional 3D control as a simpler, more learnable 2D prediction problem. Crucially, it aligns observations and actions in the same coordinate space, enabling equivariant transformations to jointly rotate individual camera images together with their image-space actions. We analyze the symmetry properties of this augmentation and design a network architecture that can fuse multiple camera views while respecting their per-view rotations. As a result, Pix2Act implicitly enlarges the support of the data distribution and learns invariant action structures across transformations, yielding improved generalization and overall performance. Across diverse simulated and real-world manipulation tasks, Pix2Act outperforms state-of-the-art baselines and remains robust under camera perturbations.

Robot manipulation is a complex task that requires visual perception, physical reasoning, planning, and closed-loop control. General-purpose foundation models (FMs) have grown remarkably capable of some of these, especially perception and reasoning. Inspired by the growing ability of FM-powered agents to operate software through visual interfaces, we ask whether that same competence suffices to control a robot directly given the right interface. We present VIA (Visual Interface Agent), a framework that recasts robot control as an agentic task where an off-the-shelf agent drives a manipulator directly through an interface. The interface is a virtual workspace of interactable visual components where the agent can probe pixels of interest with mouse-like tools and command a virtual end-effector to set new target poses with a small set of general tools. We show that VIA enables agents of varying capabilities to perform diverse tabletop manipulation tasks in simulation. We also use VIA to drive an off-the-shelf mobile manipulation robot in the real world to complete tasks that require both navigation and manipulation. Both settings are zero-shot, requiring no robot training or additional action primitives. Performance scales well with the size and strength of the underlying FMs. These results suggest that frontier agents already possess skills that transfer directly to robot control given the right interface: your coding or computer-use agent is, in a sense, secretly a robot-control agent.

We present a manipulation planning system based on affordance recognition and action effect prediction. The system reasons through possible futures in visual form, and evaluates candidate plans by agreement of predicted outcomes with text-based goals set at run-time, using a multi-modal goal-matching module. Positions of objects named in the goal text are tracked through predictions even when occluded, making it possible to generate action plans even when objects become occluded, or when their initial descriptors cease to identify them in future states. We further expand the system with an image conversion module for translating real-world state images with objects of varied shapes and visual appearances into a consistent visual appearance, to facilitate manipulation planning in a physical robot setup. We evaluate performance of the system's modules in isolation and demonstrate the integrated system's manipulation planning capabilities on a set of challenging tasks in both simulation and on hardware.

Diffusion policies have shown promising empirical performance in representing and learning complex maneuvers for robots using behavior cloning (BC). In this paper, we explore training diffusion policies from scratch using reinforcement learning (RL) for multi-task robotic manipulation. Specifically, we aim to train a single diffusion policy for block-pushing tasks with multiple shapes. The proposed framework features a simple policy loss function, which is a reweighted evidence lower bound used in BC-based diffusion policy training and can seamlessly serve as the policy learning module in RL algorithms. To address the exploration challenges arising from the absence of demonstrations, we incorporate reverse curriculum generation and objective-centric representations. Combined with the expressiveness of diffusion policies, our design supports learning of multi-task block-pushing policies in our sparse-reward simulation setting. We further evaluate whether the trained diffusion policy transfers in zero-shot to real-world tasks under varying environmental conditions including goal positions, block shapes, block weights and surface friction, providing evidence that this pipeline can transfer to our real-world block-pushing setup under the tested variations.

The action space poses a major challenge in robot learning, since it is often high-dimensional, can span long time horizons, and frequently admits multi-modal optimal solutions. A good choice of action representation and loss function can help to address these concerns, but there are often trade offs. We propose Action Map Policy (AMP), which casts 3D closed-loop manipulation policy learning as a classification problem in image space. While classification has been an effective formulation in generative language models, applying it to robot action learning is difficult because naively discretizing high-dimensional continuous actions explodes the token vocabulary. Our key idea is to project 3D actions onto the camera image planes and treat each pixel location as a discrete class, thus controlling dimensionality while retaining multi-modality. This method supports millimeter-level precision for high-dimensional actions without requiring a prohibitively large vocabulary, while preserving fine-grained pixel-wise visual signals. Furthermore, it can predict the entire action chunk in a single forward pass, avoiding complex noise scheduling and iterative denoising while achieving substantially faster inference than diffusion policies. Experiments on various manipulation tasks show that AMP outperforms strong baselines, achieving higher success rates, faster inference, and enhanced spatial reasoning.

Automation in industries such as retail, warehousing and logistics presents opportunities for greater throughput, cost reduction and mitigation of disruptions from labour shortages. Previously, such efforts have focused on back-room operations involving packing and sorting in relatively structured environments. With advances in robotic mobile manipulation hardware and foundation models, automation can now be applied to more variable and human-centric environments such as retail store shelves. In this work, we present a task-planning approach using Large Language Models (LLMs) and Vision-Language Models (VLMs) to address the restocking problem in retail scenarios such as supermarkets. We demonstrate this system on a custom omnidirectional mobile manipulation platform, with user-driven prompts and a feedback-based iterative re-planning approach for error correction. The end-to-end system is validated in a PyBullet simulation environment for pick-and-place tasks.

Offline-to-online reinforcement learning is promising for generalizable robotic manipulation, yet its full-stack complexity obscures reproduction and diagnosis. Within such systems, value estimation plays a central role in prioritizing heterogeneous data for policy improvement. Despite its importance, the central question remains underexplored: how value-function reliability shapes policy optimization in offline-to-online reinforcement learning. To answer this question, we propose Robo-ValueRL, a unified framework that enables reliable value estimation and systematically traces its downstream effects on policy pretraining and online improvement. Concretely, Robo-ValueRL learns a history-conditioned value estimator and evaluates its reliability through global-progress and local-preference metrics. These resulting value estimates are propagated into quality-conditioned consistency-policy pretraining and a residual adaptation module on online rollouts, providing a unified testbed for analyzing how value reliability shapes downstream policy performance. Across 240 hours of offline demonstrations and over 3,000 online rollout trajectories, our extensive experiments show that downstream performance is strongly associated with value reliability. Reliable value functions provide better action-quality estimates, allowing value-guided offline RL to scale more effectively than quality-agnostic behavior cloning, and stabilize online improvement by prioritizing high-quality rollout data. Integrating reliable value guidance through offline pretraining with online improvement, our system achieves 86% success on millimeter-level precise chip insertion and 84% on generalizable block disassembly. We hope these findings highlight the importance of value-guided data utilization for effective policy improvement from heterogeneous robotic experience.

In this work, we present B-spline Policy (BSP), an action representation designed for accelerating robot manipulation policies. Rather than predicting discrete-time action chunks, BSP parameterizes actions as continuous B-spline curves defined by a set of knots and control points. This representation yields smooth, time-continuous trajectories that can be temporally scaled and executed by low-level controllers at higher frequencies and speeds. We show that B-spline-parameterized actions can be seamlessly integrated into standard policy learning pipelines by directly predicting B-spline parameters. Experiments on simulated and real-world tasks demonstrate that BSP significantly reduces task completion time, achieving substantial improvements over baseline methods while maintaining strong success rates. More results: https://b-spline-policy.github.io

Aerial manipulation with multirotor platforms enables physical interaction in complex environments, but rotor-induced airflow remains a critical limitation for tasks involving airflow-sensitive targets or surroundings. This paper presents an optimization-based design framework for modular aerial manipulators that jointly considers task wrench feasibility, end-effector placement, and airflow exposure constraints. We first introduce a novel categorization of target-side airflow tolerance and formulate the corresponding exposure requirements as geometric constraints. To efficiently model rotor-induced airflow, we introduce a compact cone-sphere envelope that approximates the spreading structure of a quadrotor's airflow while preserving computational tractability for optimization. Building on this formulation, we propose a reconfiguration optimization that adapts a modular aerial manipulator to diverse task wrench requirements while enforcing both target-side airflow exposure and intra-platform airflow interference constraints. Unlike prior designs that assume a fixed end-effector location, the proposed framework optimizes the end-effector placement together with the platform configuration. Scalability experiments and ablation studies validate the effectiveness of the proposed framework.

We present DemoBridge, an toolkit that turns a single-view RGB stereo recording of a human hand demonstration into an executable, physics-validated robot-arm trajectory. Retargeting across the embodiment gap is hard. A robot arm reaches a target with a long, articulated body whose links carry far more collision volume than a hand. Solving inverse kinematics for the mapped end-effector pose often yields no collision-free solution, and a trajectory imposes this at every waypoint. A single view adds noise, leaving the demonstrated reference inaccurate. At the core of DemoBridge is a single collision-aware planner. It optimizes the whole joint trajectory at once, reasoning jointly over alternative grasp poses, whole-arm and grasped-object collision, and fidelity to the demonstrated path. A physics simulator runs in the loop. It validates each phase as it is produced and backtracks on failure, so a demonstration that cannot be reproduced as given is re-planned rather than discarded. The resulting action sequence is dynamically stable and faithful to the demonstrated manipulation. It also doubles as a ready-to-use simulation rollout for policy learning. Grasp timing is inferred automatically, and the perception backends, robot, and pipeline stages are swappable from configuration. We evaluate whole-pipeline retargeting on three real-demonstration tasks and the planner on a controlled synthetic benchmark. Our code is available at https://gitlab.kuleuven.be/u0123974/demo-bridge/ .

Robotic manipulation tasks often require simultaneous reasoning over motion and contact forces, yet most Learning from Demonstration (LfD) methods model only spatial trajectories and neglect force interactions with the environment. This limitation reduces robustness and can lead to unsafe or inconsistent task reproduction in force-constrained settings. We propose a novel one-shot multimodal LfD framework for the segmentation, encoding, and reproduction of force-inclusive demonstrations. First, we introduce a multimodal probabilistic segmentation method that adaptively weighs spatial and force modalities over time, enabling the automatic extraction of force-aware motion primitives. Second, we extend the elastic maps representation to incorporate external force constraints during skill encoding and formulate a convex optimization procedure for learning force-consistent trajectory models. The resulting skills reproduce both motion and contact characteristics from a single demonstration while promoting safer execution by accounting for demonstrated force profiles. We validate our approach on five real-world manipulation tasks across two distinct force-sensing configurations: wrist force sensing on a UR5e with a Robotiq 2f-85 gripper and finger force sensing on a Kinova Gen3 with an Openhand Model O gripper. Experimental results demonstrate robust multimodal segmentation, accurate force-aware reproduction, and cross-platform generality.