Semantic Communications

Classical CSI feedback in FDD massive MIMO transmits a compressed reconstruction of the channel, optimizing fidelity to the original signal regardless of the downstream task. We propose a semantic communication perspective: instead of reconstructing the channel, the UE transmits a learned \emph{semantic embedding} optimized end-to-end for beam selection at the gNB. Comparing reconstruction-oriented feedback (CsiNet) against task-aware semantic feedback across two input domains and three observation scenarios, we show that a semantic embedding of just $d=8$ real values from only 43 NR CSI-RS pilots in the angular-delay domain achieves the highest beam prediction accuracy, outperforming every method with access to the full 512-subcarrier channel. The key insight is that beam-relevant information is intrinsically low-dimensional: the semantic encoder learns to discard reconstruction-irrelevant structure and retain only a compact representation that is relevant to beam selection, realizing the core principle of semantic communication: transmit the intent, not the signal.

Existing knowledge-base-assisted semantic communication schemes commonly adopt either single knowledge-base quantization (SKBQ) or multi-knowledge-base residual quantization (MKBQ). SKBQ incurs limited storage overhead but has restricted quantization capacity, whereas MKBQ supports progressive refinement by assigning an independent knowledge base (KB) to each stage, causing the KB storage to grow linearly with the transmission depth. To address this problem, we propose storage-scalable knowledge-base reuse quantization (SSKBQ), which reuses a compact set of KBs across multiple residual refinement stages and thereby decouples the number of transmission stages from the number of maintained KBs. A stage-aware residual supervision mechanism is further introduced to regularize intermediate quantized representations and encourage progressive refinement. Experimental results demonstrate that KB reuse provides an effective solution to the storage scalability problem while maintaining competitive progressive reconstruction performance.

Integrating generative adversarial networks (GANs) into federated semantic communication (SemCom) is a natural progression, as generative priors can recover semantic fidelity under channel distortion that discriminative decoders cannot. However, naive GAN federation introduces three failure modes that prior work has, to the best of our knowledge, neither identified nor resolved: discriminator aggregation instability under non-independent and identically distributed (non-IID) data, semantic drift caused by divergent local embedding spaces, and channel-agnostic generation that cannot adapt to heterogeneous link conditions. We propose federated generative semantic communication (FedGenSC), which mitigates all three by employing a global generator with local-only discriminators, providing cross-client semantic information through a semantic prototype bank, and conditioning generation on the instantaneous signal-to-noise ratio (SNR). Experiments on the Europarl dataset over Rayleigh fading channels (K=10 clients, Dirichlet α=0.5) show that FedGenSC under non-IID data outperforms the FedDeepSC baseline across the tested SNR range, achieving up to a 58.2% relative improvement in bilingual evaluation understudy (BLEU)-1 at 18 dB. Ablation studies confirm the independent contribution of each component.

Semantic and goal-oriented communication is increasingly studied for 6G, but generalization beyond seen data remains a key weakness under tight rate budgets. Many existing systems overfit their training data and degrade sharply at very low bit rates because they attempt to compress the entire signal. We introduce Foundation Model-Guided Semantic and Goal-Oriented Communication (FMSGOC), a framework that uses broad visual-linguistic Foundation Model priors to mitigate overfitting. It further improves rate efficiency by concentrating bits on sparse, goal-aligned anchors and relying on generative foundation-model priors to reconstruct the masked regions. By decoupling what to send from how to reconstruct, a vision-language foundation model selects and transmits a sparse set of semantic anchors, while a pretrained diffusion model, fine-tuned for masked completion, reconstructs the image at the receiver. In our experiments, FMSGOC reaches 0.039 bits per pixel (BPP), maintains high semantic fidelity (cosine similarity 0.87-0.90 on CIFAR-10), remains robust on previously unseen inputs (0.83-0.86 on ImageNet), and shows good perceptual similarity (0.1278/0.1558, CIFAR-10/ImageNet), outperforming strong end-to-end baselines at lower bit rates.

Connected robotics is an emerging 6G application where mobile robots follow natural-language instructions to manipulate physical objects. The Vision-Language-Action (VLA) models that enable this are too large to run on the robot; a common trend is to offload inference to the cloud. The wireless link, however, limits how much sensing data the edge can transmit per control step. Two recent lines address this constraint: semantic communication codecs compress sensor data but require channel-specific retraining, and VLA token pruners select tokens from image but ignore the channel. Our insight is that the dense semantic information contained in the language already indicates which visual tokens matter. We propose ComVLA, a framework that uses this language guidance to adapt the VLA token budget to the channel capacity. Transmitting 32 tokens instead of 512 on the LIBERO benchmark, ComVLA cuts inference compute by 74% and inference latency by 22% versus the original OpenVLA-OFT baseline, at a cost of 1.5 pp in average task success (95.4% vs. 96.9%), and it stays within the capacity budget under Rayleigh and Rician fading. These results demonstrate that co-designing VLA inference and wireless communication is a practical direction for 6G-connected robotics.

Multi-Task semantic communication (SemCom) prioritizes simultaneous execution of multiple tasks over bit-accurate reconstruction in future intelligent networks. In our prior work [1], we introduced the cooperative multi-task SemCom (CMT-SemCom) framework, in which the semantic encoder is divided into a common unit (CU) and multiple specific units (SUs) to facilitate cooperative multi-task processing. However, CMT-SemCom has been evaluated on homogeneous classification tasks on simplistic datasets, limiting its applicability to real-world perception systems. In this paper, we extend our CMT-SemCom to jointly handle heterogeneous classification and regression tasks on the complex Cityscapes dataset. We adopt the information maximization (InfoMax) principle so that it accommodates mixed discrete and continuous semantic variables. In particular, we benchmark the proposed framework against independent single-task training, a conventional task-agnostic digital transmission, and single-encoder multi-decoder SemCom. Additionally, we investigate the impact of CU capacity on joint task performance, providing design insights. Extensive evaluations demonstrate that CMT-SemCom significantly outperforms the benchmarks.

Token communications realize the semantic communication principle at the granularity of transformer tokens, providing a promising direction for client--server collaborative inference in resource-constrained edge systems. However, directly transmitting token embeddings presents two practical challenges: substantial communication cost and limited interoperability across model-specific token embedding spaces. To address these challenges, we propose a \emph{token-oriented} semantic communication framework. In this framework, token-level task relevance determines which compressed image latents are transmitted, enabling token-granular transmission without directly transmitting token embeddings. The framework is modular, coordinating three pretrained components---a lightweight client-side vision transformer (ViT), a learned image compression (LIC) model, and a large server-side ViT---without end-to-end training. The key enabler is the one-to-one spatial alignment between ViT patch tokens and the LIC latent vectors, which allows token-level task relevance to directly determine which latent vectors are transmitted. Building on this alignment, token-aligned LIC selectively transmits task-relevant latents, layer-selective attention rollout estimates token relevance from a selected range of attention layers in a single forward pass, and surrogate token substitution adapts the frozen server model by optimizing a single learnable token. Experiments on ImageNet show that the proposed framework achieves a more favorable rate--accuracy trade-off than recent semantic communication schemes, hand-crafted codecs, and task-agnostic LIC models.

6G networks will not be serving as communication infrastructures only; rather, they are expected to evolve into intelligent systems, where thousands of autonomous artificial intelligence (AI) agents are interconnected. The agents are deployed across a wide range of platforms including low Earth orbit (LEO) satellites, high-altitude platforms (HAPs), unmanned aerial vehicles (UAVs), edge servers, and terrestrial devices. These agents continuously observe their environment and exchange information. Semantic communication provides an efficient mechanism for exchanging meaningful information instead of raw data. However, its effectiveness depends on the communicating agents having sufficiently aligned beliefs to correctly interpret and decode the transmitted messages. This assumption becomes difficult to satisfy in the 6G network where heterogeneous AI models operate under diverse computational constraints and continuously acquire different knowledge from their local environments. This article presents a heterogeneity-aware belief synchronization framework for 6G AI-native networks. It uses latent translation models deployed on multi-access edge computing (MEC) servers. These models translate belief updates from one agent to agent-specific knowledge without requiring joint training and a homogeneous architecture of models. By exchanging compact belief updates through a latent translation model only when necessary, the framework preserves privacy, reduces synchronization cost, and minimizes local knowledge drift. We validate the framework through a case study on a multi-layered terrestrial/non-terrestrial network. Results demonstrate that it maintains low synchronization cost, measured by the number of parameters transmitted, and low belief alignment error across the heterogeneous agents in the case study.

Autonomous robots increasingly rely on edge computing to offload computationally intensive perception tasks while maintaining real-time operation over 5G networks. However, conventional fiducial marker detection pipelines provide limited opportunities for efficient task partitioning, making them poorly suited for communication-aware edge deployment. This paper proposes a semantic split inference framework for fiducial marker processing in 5G-enabled Edge SLAM. A DeepTag-inspired convolutional neural network is partitioned between the robot and the edge server, where intermediate feature representations serve as task-oriented semantic information transmitted over the wireless link. The framework is integrated into a ROS2-based robotic architecture and characterized over a real 5G communication testbed. Experimental results demonstrate accurate keypoint estimation, illustrate the impact on downstream pose estimation, and quantify the communication--computation trade-offs associated with different split points, providing practical insights for communication-aware deployment of deep visual perception in connected robotic systems.

Collaborative robotics is a representative task-oriented 6G use-case, where communication quality should be reflected in mission execution, environment understanding, and closed-loop operation rather than packet delivery alone. This demo paper presents a robot-edge semantic communication (SemCom) testbed integrating robot-side visual compression, edge-side semantic mapping, and dashboard-based mission interaction. A mobile robot equipped with RGB-D sensing and LiDAR runs ROS 2, while a Jetson Orin edge node performs reconstruction, RTAB-Map mapping, semantic object handling, and browserbased visualization. As an initial proof of concept, RGB frames are encoded on the robot into VQ-VAE tokens using an ONNX Runtime encoder and reconstructed on the edge using a PyTorch decoder. A 320 X 240 image is represented by an 80 X 60 token grid with a packed payload of 5400 bytes, corresponding to a 42.67X reduction relative to model-input RGB bytes. The reconstructed visual stream is further associated with depth, pose, and 3D mapping information to generate a semantic map for downstream robotic applications. The demo exposes the full path from semantic visual transport to object-level map interaction, and provides a practical platform for future task-aware 6G networking studies at the intersection of SemCom, embodied AI, and physical AI-enabled robotics. A video of the demo is available at https://tinyurl.com/Tos09

We propose RSTA, a domain-generalized semantic communication framework enabling source-free V2X collaborative perception under both observation-domain shift and unseen wireless channel conditions. In V2X, received semantic tokens suffer coupled degradation from pre-transmission domain drift and in-transit channel corruption; existing methods address only one source, leaving adaptation misled by tokens that are simultaneously off-domain and physically degraded. RSTA trains a pre-deployment semantic encoder for transmission stability via cross-domain prototype alignment and cross-channel gradient consistency, and updates a lightweight in-deployment decoder adapter through reliability-gated entropy minimization that restricts gradients to tokens ranked high in both semantic relevance and channel fidelity. A theoretical task robustness decomposition links each loss term to a distinct degradation source, grounding each algorithmic component in a measurable error mode. Trained on AWGN and tested on unseen Rayleigh fading, RSTA achieves +7.2 AP@0.7 over pre-deployment domain generalization on cross-weather tasks and +5.5 on cross-dataset tasks across four V2X benchmarks, updating only 0.21% of parameters in-deployment with zero inter-agent synchronization overhead.

In multiple-input multiple-output (MIMO) semantic communication, imperfect channel state information (CSI) and equalization mismatch can seriously degrade semantic reconstruction quality. To address this issue, we propose a unified restoration flow matching (RFM)-based framework for channel refinement and equalization correction. Specifically, the channel RFM (CRFM) module is developed to refine the coarse channel, thereby improving channel estimation accuracy. Based on the refined channel, the developed semantic RFM (SRFM) module is employed to correct the residual distortions in the post-equalization latent space. The key idea is to formulate the two cascaded inverse problems of channel estimation and equalization as the unified conditional restoration task, in which the learned conditional velocity field guides the perturbed distribution towards the target distribution. To enhance the robustness of these two modules under various distortion conditions, we develop a dual-anchor perturbation training strategy that jointly learns near-manifold refinement and large-error correction, and implement inference through a few-step deterministic ordinary differential equation (ODE) solver. Extensive experiments on MIMO channels and visual semantic transmission tasks demonstrate that the proposed scheme improves key metrics for channel estimation and semantic reconstruction quality. Moreover, compared with representative diffusion-based generative baselines, the proposed method requires fewer sampling steps.

Cooperative multi-task semantic communication (CMT-SemCom) improves task execution performance by leveraging shared representations. However, as we demonstrated in [1], cooperative multi-tasking can be either constructive or destructive, depending on the semantic relationships among tasks. To ensure constructive cooperation, we propose a semantic-aware task clustering method for CMT-SemCom. We have formulated a sequential multi-stage optimization problem in which semantically aligned tasks are clustered once after a short initial training phase, and then end-to-end (E2E) joint training is conducted exclusively within the discovered groups. Specifically, the problem decomposes into two stages: (i) a semantic clustering problem leveraging hierarchical density-based spatial clustering, and (ii) an intra-cluster E2E CMT-SemCom learning problem. Simulation results demonstrate that the proposed framework effectively mitigates destructive cooperation and negative transfer, yielding accuracy gains compared to unclustered multi-tasking and individual training baselines.

Real-time mobile 3D reconstruction is fundamental to many emerging applications such as autonomous navigation and digital twin construction, where a moving platform continuously captures an image stream and transmit to a computing server for scene understanding. Unlike offline reconstruction, camera poses and scene geometry are estimated on-the-fly during acquisition, making multi-view consistency a real-time requirement and rendering geometric estimation highly sensitive to communication-induced distortions. Semantic communication (SemCom) transmits compact semantic information, offering a promising way to preserve task-critical data over unreliable links. However, existing designs are optimized at the image or single-view level and without providing explicit reliability information for geometric estimation, limiting their applicability to real-time mobile 3D reconstruction. In this context, we propose a SemCom framework for real-time mobile 3D reconstruction. The framework includes a semantic transceiver that outputs a reconstructed image alongside a pixel-wise confidence map, quantifying the reliability of each region. We further introduce a confidence-guided geometric estimation method, incorporating confidence into RANSAC-based pose initialization and bundle adjustment to reduce the influence of unreliable regions and enhance robustness under noisy channels. Simulations show that, compared to existing SemCom and traditional seperate source and channel coding, our framework maintains high image quality while significantly improving pose estimation accuracy and 3D structural consistency.

The development of smart transportation systems and the introduction of 6G wireless communication technologies have significantly changed vehicle network topologies. Future connected autonomous vehicle (CAV) networks require bandwidth-efficient, reliable, and low-latency communication for safety-critical applications such as traffic sign recognition and decision-making. Conventional communication systems transmit raw data regardless of task relevance, which is inefficient in resource-constrained satellite channels where uplink bandwidth is scarce and propagation losses are large. Semantic communication addresses this limitation by transmitting task-relevant information instead of full signal representations. It extracts and conveys essential semantic features and leverages deep learning to optimize task performance at the receiver. Therefore, we present a Variational Autoencoder (VAE)-based multi-task semantic communication framework for satellite-assisted autonomous driving. Unlike deterministic autoencoder-based methods, the proposed model uses probabilistic latent representations for more robust and efficient encoding. The learned features are transmitted over noisy wireless channels to perform traffic sign reconstruction and classification. The framework is trained end-to-end to jointly optimize both tasks. Results show that the proposed approach achieves significant bandwidth reduction of up to 87.23% to 98.17% while maintaining stable performance across varying signal-to-noise ratio conditions.

Semantic communication (SemCom) has emerged as a promising paradigm in which the transmission of task-relevant information is prioritized over raw data, enabling efficient and robust communication under resource and channel constraints. In this paper, the privacy implications of relay-assisted SemCom systems are studied, where the intermediate relay node operates directly on learned latent representations. It is shown that the relay, even without access to source data, can reliably infer semantic meaning and reconstruct signals with performance comparable to that of the legitimate receiver, revealing a fundamental privacy vulnerability of semantic representations. To address this issue, an iterative adversarial training framework is proposed in which a strong, adaptively trained eavesdropper at the relay is explicitly accounted for. The proposed approach alternates between optimizing the relay's eavesdropping function and the legitimate system, resulting in representations that preserve semantic decoding performance at the intended receiver while degrading semantic inference at the relay. The semantic accuracy gap between the legitimate receiver and the eavesdropper is significantly enlarged across channel conditions. Importantly, this protection is achieved in a stealthy manner, with high reconstruction fidelity maintained while semantic leakage is selectively suppressed.

Emerging uplink-dominant 6G use cases, such as cooperative vehicular streaming, require efficient transmission of high-volume visual data over limited wireless resources. While semantic communications can reduce traffic by prioritizing task-relevant content, most existing approaches treat users independently and therefore overlook spatial redundancy among nearby devices' observations. This paper proposes a semantic-aware multiple access scheme that exploits overlapping fields of view among vehicular users to reduce redundant uplink transmissions. We formulate a joint perception and transmission control problem in which users decide which image patches to transmit, when to transmit them, and over which channel, subject to communication constraints. To address the resulting complexity, we introduce a practical two-phase approach. First, nearby vehicles share selected observation patches over Vehicle-to-Vehicle (V2V) links to calculate inter-user spatial redundancy. Second, users transmit only semantically important, non-redundant patches to the base station, where observations can be reconstructed using the received patches and complementary views from neighboring vehicles. Simulation results in a dense urban vehicular scenario demonstrate that our approach improves the proportion of users who achieve high-fidelity reconstruction, highlighting the potential of semantic-aware multiple access for sustainable and resource-efficient 6G uplink systems.

The emerging techniques of semantic communications and edge computing in 6G networks necessitate a paradigm shift toward co-designed semantic-aware and adaptive resource allocation for short-packet transmissions. However, there is a fundamental gap between the semantic layer and the physical layer under low-latency finite blocklength (FBL) effects. To bridge this gap, we introduce the Quantized Semantic Age of Information (QSAoI), a novel metric that rigorously captures the trade-offs among freshness and semantic efficiency of high-level features in real-time communication in the FBL regime. Guided by this metric, we propose a novel foundation model-based efficient co-designed framework to minimize the expected QSAoI over wireless fading channels in latency-constrained semantic communication. Specifically, we formulate a non-linear joint optimization problem to dynamically optimize the block-wise mixed-precision quantization (MPQ) strategy and the physical blocklength. To efficiently resolve this complex problem, we develop a high-efficiency low-complexity algorithm based on fixpoint inspection and bisection search. Extensive simulations validate that our proposed algorithm dynamically adapts the semantic quantization precision to varying channel conditions, effectively minimizing the expected QSAoI compared to baselines.

Semantic communication (SemCom) aims to preserve semantic meaning and task-oriented information beyond conventional message recovery over wireless channels. The adoption of SemCom in shared-access wireless networks introduces new vulnerabilities for multi-user semantic inference. This paper considers a SemCom system for two transmitters communicating with a common receiver over a multiple access channel. Each transmitter maps source information into latent semantic representations, while the receiver jointly reconstructs and classifies the semantic information for both transmitters. A selective over-the-air backdoor (Trojan) attack is presented in which an adversary transmits a low-power trigger waveform over the air and injects it into the shared received signal during training. By transmitting the trigger again during testing, this stealthy, low-power attack selectively manipulates the semantic inference for one transmitter while minimally affecting the inference of the other transmitter. To mitigate this vulnerability, a trigger-aware defense mechanism is developed to preserve correct semantic labels under trigger-contaminated wireless observations. The results demonstrate both the vulnerability of shared-access SemCom systems to selective over-the-air backdoor attacks and the effectiveness of trigger-aware robust training for semantic protection.

Quantifying how meaning propagates through communicative exchanges remains underdeveloped in computational linguistics. Here we introduce an information-theoretic framework that quantifies the directed flow of semantic content between interlocutors and decomposes multi-source contributions into redundant, unique, and synergistic components. Our approach leverages large language models as probabilistic estimators of natural language to compute two measures: semantic transfer entropy (STE), which captures directed predictive influence between speakers, and semantic partial information decomposition (SPID), which resolves how multiple sources jointly shape a target's language. Across four experiments we show that the framework detects reduced information flow in cognitively rigid dialogue, captures the dominant role of persuaders in shaping discourse, distinguishes high- from low-quality psychotherapy by the directionality of therapist-client information exchange, and reveals synergistic premise contributions in argumentative essays. This framework opens new avenues for studying information dynamics in digital discourse, pedagogical interactions, clinical dialogues, and any domain in which the structure of linguistic exchange is of research relevance.

Resource-constrained visual Internet of Things (IoT) systems, such as edge cameras, unmanned sensing platforms, industrial inspection nodes, and remote monitoring sensors, often need to transmit task-relevant visual evidence over low-rate wireless links to an edge/cloud service. Existing image communication methods usually compress or transmit complete global representations, leaving limited room to exploit receiver-side generative restoration. This paper proposes a semantic-aware generative image transmission framework for edge-assisted visual IoT. The image captured by an IoT visual sensor is encoded into a discrete token grid by a VQ encoder. At the IoT transmitter or nearby gateway, token recoverability, estimated from prediction entropy and local structure complexity, is fused with semantic importance obtained from instance segmentation and category-aware scoring. A spatial dispersal sampler then selects the tokens to be transmitted under a bitrate budget. The transmitter sends only the quantization indices of kept tokens and a binary mask map, while the edge/cloud receiver recovers masked tokens through MaskGIT with Halton sequence scheduling. Experiments on Kodak and VisDrone scenes under AWGN and Rayleigh channels show that the proposed method provides a flexible bitrate-quality tradeoff for narrowband visual IoT links. At 0.074 bpp, it uses 44.6% of the transmitted bits of the 0.167-bpp DeepJSCC/WITT reference while achieving 29.9 dB PSNR. A pseudo-GT downstream detection study on Kodak further shows that semantic-aware masking preserves task-relevant objects better than random masking at both 30% and 50% mask ratios.

Semantic-aware communication has emerged as a transformative paradigm for next-generation communication systems, shifting the fundamental goal from transmitting bit-level symbols to reliably recovering and understanding the semantic meaning of information. Previous studies have demonstrated that representing the semantic content of source messages as graph-based structures can significantly improve communication efficiency and the accuracy of semantic inference at the receiver. However, existing solutions typically employ graphs that capture only pairwise relationships, thereby neglecting higher-order implicit correlations commonly observed in real-world scenarios, such as group interactions, multi-entity associations, and complex relational contexts. This limitation reduces semantic expressiveness and makes semantic inference susceptible to ambiguity and performance degradation, particularly under noisy or corrupted channel conditions. To address these issues, this paper proposes a novel hypergraph-based implicit semantic reasoning framework, HISR, which leverages hypergraphs to represent complex multi-entity relationships among semantic knowledge entities. In HISR, entities and their associated higher-order relations are mapped into dedicated semantic subspaces tailored to distinct relational contexts. This design not only disentangles diverse semantic interactions to mitigate the over-smoothing effects commonly found in traditional graph embedding methods but also enables robust semantic inference even when partial information loss occurs during transmission. Numerical results show that the proposed HISR achieves up to a 36.6% improvement in implicit semantic interpretation accuracy over the state-of-the-art benchmarks.

The integration of Foundation Models (FMs) and wireless communications is driving the evolution of image communication from bit-accurate transmission toward task-oriented transmission. However, existing task-oriented image communication methods still face three major challenges: insufficient task-oriented Token representation, inadequate collaboration between Visual Tokens and Task Tokens, and limited interpretability of task decisions. To address these challenges, we propose an Explainable Task-Oriented Token Communication (ET-TokenCom) framework. By treating Tokens as unified units for information representation and transmission, the proposed framework constructs an end-to-end communication link that spans visual perception, wireless transmission, and task reasoning. At the transmitter, the ET-TokenCom framework extracts Visual Tokens from images to preserve low-level visual information. Meanwhile, Task Tokens generated by the FM are introduced to represent the target information and decision intent required by the current task. A Cross-Modal Attention (CMA) fusion mechanism is further designed, enabling Task Tokens to explicitly guide the selection, weighting, and transmission of Visual Tokens. At the receiver, the framework integrates Token decoding with an explainable output mechanism, where attention heatmaps are generated to highlight critical perceptual regions under different task objectives and reveal the influence of Task Tokens on the outputs. Finally, simulation results validate the effectiveness and robustness of the proposed ET-TokenCom framework.

Automating scientific computing workflows requires more than generating executable code: autonomous systems must also select appropriate computational strategies, implement them faithfully, and ensure that the resulting outcomes remain causally attributable to the decisions that produced them. In multi-agent pipelines, this process is particularly fragile, as small inconsistencies between agent intentions and actions can lead to semantic drift, where the eventually executed procedure no longer reflects the originally selected strategy, thereby corrupting downstream evaluation and adaptation. In this work, motivated by the ATHENA framework (Toscano et al., 2025; Toscano et al., 2026) and the concept of empowerment (Yiu et al., 2025), we introduce a multi-agent framework that combines contextual bandits with structured inter-agent communication and, most importantly, semantic checkpoints that preserve action-outcome fidelity throughout the pipeline. The system integrates specialized large language model (LLM) agents, grounded code generation, and self-healing execution loops within an adaptive decision-making architecture. Interpreting the framework through the lens of empowerment, we show that reliable autonomous learning requires not only identifying high-quality actions, but also preserving the integrity of their propagation across agents. Using sensitivity analysis and uncertainty quantification workflows as representative case studies, we demonstrate that unchecked semantic drift degrades policy learning, whereas the proposed framework improves convergence, robustness, and adaptation to novel problem contexts. These results suggest a broader design principle for scientific multi-agent systems: adaptive decision-making must be coupled with explicit mechanisms that guarantee semantic consistency and reliable information flow across the computational pipeline.

Image semantic communication is a critical component in next-generation wireless communication systems. However, such systems typically suffer from large memory footprints and high computational complexity, making them difficult to deploy on resource-constrained devices. To address these challenges, we propose a vision transformer (ViT)-enabled image semantic communication system. In this system, a recursive structure is introduced to iteratively refine semantic features and reduce the parameter count. In addition, three dynamic adjustment strategies are designed to adaptively reduce computational complexity: dynamic depth adjustment, dynamic width adjustment, and joint width-depth optimization. Dynamic depth adjustment adaptively determines the number of recursive modules according to image content and channel conditions, while dynamic width adjustment selectively preserves important neurons and attention heads. The joint width-depth optimization further enables flexible computation configurations. Simulation results verify that the proposed recursive ViT-based system, combined with the three dynamic adjustment strategies, reduces the parameter count by 48.7% and achieves higher reconstruction quality than existing baselines under comparable computational complexity.

Tokens are becoming the basic units through which foundation models represent and process information for understanding and inference. However, traditional wireless communication, centered on bit-level fidelity, faces a mismatch between what is transmitted reliably and what downstream models actually consume. This mismatch calls for a communication design that directly accounts for token-level task relevance and downstream model requirements, rather than treating all transmitted bits as equally important. In this paper, we propose TONIC, a token-centric semantic communication framework for task-oriented wireless systems. The transmitter converts each source sample into a sequence of tokens, estimates token-level task relevance, and allocates protection through utility-aware unequal error protection under a fixed channel-use budget. At the receiver, token-level confidence is used to gate unreliable decisions, turning harmful substitutions into recoverable erasures before a Transformer-based completion model restores the masked tokens for final task inference. Our framework combines transmitter-side semantic-aware protection with receiver-side confidence-aware gating in a modular and interpretable architecture, rather than relying solely on fully black-box end-to-end learning. We further establish a utility-aware Bayes-risk interpretation for the receiver-side gating rule and study its interaction with unequal protection and completion. Experimental results on image classification show that TONIC consistently outperforms separation-based schemes, the pixel-domain DeepJSCC baseline, and token-domain baselines under matched communication budgets over AWGN, Rayleigh, and Rician channels.

With the advent of sixth-generation (6G) mobile communication technology, vehicle-to-everything (V2X) communication faces unprecedented challenges in communication efficiency, system generalization capabilities, and model collaboration. Conventional machine learning struggles with high-dimensional state spaces, slow convergence, and poor generalization under heterogeneous V2X nodes, rapidly varying channels, and multimodal sensing data in V2X systems. To address these issues, we propose a quantum-enhanced framework for V2X communication and model aggregation that targets efficient, robust, and intelligent transportation in 6G, which includes four modules: the channel-adaptive semantic communication module, the multimodal fusion module, the model transfer module, and the federated aggregation module. Specifically, the channel-adaptive semantic communication module leverages quantum convolutional neural networks (CNN) and quantum distortion metrics to enable efficient transmission and strong generalization across diverse conditions. The multimodal fusion module exploits quantum attention and entanglement to compress features and associate semantics across heterogeneous data. The model transfer module employs quantum reinforcement learning to model decision-making and improve adaptability in dynamic environments. The federated aggregation module integrates quantum tensor decomposition with backpropagation-based corrections to provide privacy preservation with low overhead and to strengthen global model robustness. This work outlines a new paradigm for communication and model collaboration in future 6G intelligent transportation.

Semantic communication has emerged as a promising paradigm for enabling goal-oriented networking. However, most existing semantic communication solutions are tailored to one-shot tasks and optimize instantaneous performance. Hence, they cannot be used to support closed-loop dynamic systems with physical artificial intelligence (AI), in which the transmitted semantics affect not only the current inference outcome but also future control actions, state evolution, and ultimately long-horizon task performance. To address this gap, this paper investigates goal-oriented semantic communications for physical AI systems with closed-loop sensing-communication-inference-control. In particular, the problem of semantic communications is formulated as a long-term return-per-bit maximization under wireless bit-budget constraints while capturing both control efficiency and communication efficiency. To solve this problem, a novel causal information value (CIV) metric is introduced to evaluate the marginal contribution of each semantic token to the expected long-term return by transmission interventions. Then, a world-model-enabled causal digital twin (WM-CDT) framework is proposed to capture the dynamics of closed-loop physical AI systems and enable counterfactual reasoning for long-horizon imagined rollouts. Based on these imagined rollouts, an actor-critic policy is trained for long-horizon agent control with high data efficiency, while the semantic token selector is trained through CIV-per-bit evaluation. Extensive simulations on an AirSim-Sionna-based unmanned aerial vehicle (UAV) navigation simulator show that the proposed WM-CDT framework achieves significant improvement in return-per-kbit and navigation success rate compared to existing reinforcement learning solutions.

Semantic communication systems for goal-oriented transmission must protect task-relevant information not only through source compression but also via physical layer mapping. Existing approaches decouple constellation design and semantic encoding, exposing critical symbols to channel errors at the same rate as irrelevant ones. Contrary to this, in this paper, a joint semantic-physical layer framework is proposed, which is composed of a vector quantized-variational autoencoder that extracts discrete latent concepts, a semantic criticality indicator (SCI) that scores each concept by task relevance, and a deep reinforcement learning agent that dynamically selects the transmission subset based on instantaneous channel conditions. At the physical layer, a learned semantic-aware M -QAM constellation assigns symbol positions according to joint co-occurrence statistics and SCI scores, departing from the uniform spacing and Gray coding of standard M -QAM which minimizes average BER without regard for semantic content. We introduce a novel semantic symbol vulnerability (SSV) metric and a semantic protection probability (SPP) to quantify the exposure of task-critical symbols to decoding errors, and prove that any Gray-coded constellation is strictly suboptimal in SCI-Weighted SSV whenever the source exhibits non-uniform semantic importance and co-occurrence statistics. Simulation results demonstrate that the proposed constellation achieves near 100% SPP across modulation orders from 4-QAM to 1024-QAM versus 50% for standard constellations at high spectral efficiency, a 21:1 compression ratio with semantic quality above 0.9, generalizing across MNIST, Fashion-MNIST, and FSDD without modification.

The rapid development of low-altitude economy has driven the proliferation of Unmanned Aerial Vehicle (UAV) applications, including logistics, inspection, and emergency response. However, transmitting high-volume image data from UAVs to ground stations faces significant challenges due to limited bandwidth and stringent privacy requirements. To address these issues, a Semantic Communication (SC) framework based on Federated Learning (FL) is proposed for efficient and privacy-preserving image transmission. A Swin Transformer-based Semantic Communication (STSC) architecture is designed to extract multi-scale semantic features under constrained bandwidth conditions. Dedicated communication and computing nodes are deployed on UAVs to enhance real-time coverage and flexibility. Meanwhile, a FL mechanism enables global model training across distributed devices without sharing raw data, thus preserving user privacy. Simulation experiments conducted on the CIFAR-10 dataset demonstrate that the proposed STSC framework achieves at least 5.7 dB improvement in Peak Signal-to-Noise Ratio (PSNR) compared to DeepJSCC baselines, while also showing superior convergence and generalization performance. The framework effectively integrates UAV-assisted deployment with SC and privacy protection, offering a practical solution for bandwidth-constrained image transmission in low-altitude networks.

Semantic communication (SC) aims to reduce transmission overhead by conveying task-relevant information rather than raw data. However, existing SC approaches for video largely focus on pixel-level reconstruction or rely on complex spatiotemporal pipelines, leading to excessive bandwidth usage and latency that are unsuitable for low-resource deployments. In this paper, we propose ChronoSC, a task-oriented semantic communication framework for Video Question Answering (VideoQA). ChronoSC introduces Chrono-Color Stacking, a lightweight and lossless projection scheme that encodes temporal video dynamics into a single static image, enabling extreme temporal compression before transmission. This compact semantic representation is transmitted using a lightweight Deep Joint Source-Channel Coding (DeepJSCC) transceiver and explicitly reconstructed at the receiver. Unlike latent-space methods, explicit visual reconstruction enables the direct reuse of pre-trained vision-language models; specifically, a pre-trained BLIP model is employed to infer answers from noisy, reconstructed chrono-images. Experiments on the CLEVRER dataset show that ChronoSC achieves up to 192 times bandwidth reduction compared to raw video transmission while maintaining high VideoQA accuracy.

Future networking systems are envisioned to become part of an agentic AI-native ecosystem in which a vast number of heterogeneous and specialized AI agents cooperate seamlessly to fulfill complex user requirements in real time. However, traditional networking paradigms are characterized by a rigid decoupling of communication and computation, which often leads to significant inefficiencies in large-scale agentic AI networking (AgentNet) systems. Emergent communication offers a novel solution by enabling autonomous agents that support task-specific signaling protocols for information exchange and collaborative coordination. In this paper, we consider a multi-agent emergent communication framework, tailored for semantic-aware AgentNet systems in which the user's semantic intent can be automatically detected, inferred, and linked to a set of sub-tasks to be assigned to a set of agents. We investigate how communication and signaling protocols can emerge among collaborative agents with computationally bounded intelligence under stringent bandwidth constraints. Our proposed framework, called SANEmerg, is designed to facilitate the emergence of communication for collaborative task fulfillment while adhering to the physical limits of AgentNet. SANEmerg incorporates a bandwidth-adaptable importance-filter that dynamically prioritizes the transmission of higher-contribution message dimensions, ensuring robust performance in bandwidth-limited environments. Furthermore, SANEmerg integrates a complexity-regularizer grounded in the Minimum Description Length (MDL) principle to facilitate the emergence of computationally bounded signaling. Evaluated via an AgentNet prototype and extensive experimentation, SANEmerg demonstrates significant performance improvements over state-of-the-art solutions, achieving superior task accuracy while significantly reducing bandwidth and computational overhead.

Semantic communication (SemCom) with learned encoder-decoder architectures enables end-to-end learning of compact task-oriented representations optimized for the wireless channel, reducing channel resources needed to convey task-relevant information and improving spectrum efficiency. This paper studies semantic image transmission over block Rayleigh fading with AWGN using a multi-task semantic autoencoder that jointly reconstructs images and predicts labels from the received waveform. The latent dimension (complex channel uses per source sample) serves as a cross-layer control variable governing semantic fidelity and channel resource usage. We characterize the resulting latency-task fidelity tradeoff: larger latent representations improve inference accuracy but increase service time, channel uses, and queueing delay. Building on this insight, we develop online semantic-rate controllers that adapt the latent dimension per update under a long-term semantic error constraint. A queue-aware drift-plus-penalty policy minimizes delay subject to an average semantic error cap, while a complementary age-aware policy minimizes time-average Age of Information (AoI). By adapting the semantic rate to congestion and fidelity requirements, the proposed framework improves spectrum utilization and enables timely semantic updates with significantly lower delay and AoI than fixed-rate baselines.

This paper proposes a novel adaptive dual-path framework for covert semantic communication (SemCom), which integrates covert information transmission with task-oriented semantic coding. Unlike conventional covert communication methods that embed hidden messages through power-domain signal superposition, our framework embeds covert data within task-specific features via semantic-level intrinsic encoding. This new architecture introduces dual encoding paths with adaptive block selection: an Explicit path for public task execution and a Stego path that jointly encodes both public and covert information through contrastive representation alignment. A Gumbel-Softmax enabled adaptive path selection mechanism dynamically activates network blocks based on task require- ments. We formulate a multi-objective optimization framework that simultaneously ensures accurate semantic understanding and reliable covert transmission. We rigorously evaluate our framework's security against a powerful, independently trained attacker. Experimental results on the Cityscapes dataset demon- strate a state-of-the-art level of covertness: our method suppresses the attacker's detection accuracy to a near-random guessing level of 56.12%. This robust security is achieved while simultaneously maintaining superior performance on the primary semantic tasks compared to the baselines.

The increasing use of token-based representations in language-driven applications has motivated wireless token communication, where tokens are treated as fundamental units for transmission. However, conventional communication systems overlook dependencies among tokens and allocate transmission resources uniformly, leading to inefficient use of limited wireless resources under channel impairments. In this paper, we propose a context-aware token communication framework that leverages a masked language model (MLM) as a shared contextual model between the transmitter (Tx) and receiver (Rx). At the Rx, we develop a context-aware token detection method that integrates channel likelihoods with MLM-based contextual priors under a Bayesian formulation, enabling robust token inference over noisy channels. At the Tx, we propose a context-aware token masking strategy that selectively omits tokens that can be reliably inferred at the Rx, allowing the available power budget to be concentrated on more informative tokens. These components are jointly designed through a shared MLM, establishing a unified Tx-Rx framework for efficient token transmission and detection. Simulation results demonstrate that the proposed framework significantly improves reconstruction performance compared to conventional and existing token communication schemes, achieving up to 1.77X and 1.63X performance gains on the Europarl corpus and WikiText-103 datasets, respectively.

Token communication has emerged as a promising framework for efficient wireless transmission by representing source data as compact semantic tokens. However, transmitting full semantic tokens still incurs considerable communication overhead. In this paper, we propose an evolving semantic token communication system with a parametric memory network over MIMO fading channels. Specifically, only an equal-length prefix of each semantic token is transmitted, which reduces transmission cost while preserving a consistent token structure for receiver-side recovery. At the receiver, a parametric memory network is introduced to reconstruct the missing suffix information from the received token prefixes, where semantic memory is stored implicitly in the network parameters. To realize this design, full semantic tokens are first organized into a codebook, and truncated tokens are paired with the codeword labels of their corresponding full tokens. Based on these token-label pairs, kNN-based teacher distributions are constructed to fine-tune a pretrained GPT-2-based recovery module, which learns to infer the codeword distribution of each incomplete token and recover the corresponding complete semantic token. In addition, an online evolution strategy is developed to periodically update the parametric memory network and the entire system using newly observed test samples, thereby improving adaptability under distribution shifts. Experimental results demonstrate that the proposed method consistently outperforms the existing evolving memory benchmark under different channel conditions and channel bandwidth ratios, with up to 1.09 dB PSNR improvement.

Deploying Vision-Language Models (VLMs) on edge devices remains challenging due to their substantial computational and memory demands, which exceed the capabilities of resource-constrained embedded platforms. Conversely, fully offloading inference to the cloud is often impractical in bandwidth-limited environments, where transmitting raw visual data introduces substantial latency overhead. While recent edge-cloud collaborative architectures attempt to partition VLM workloads across devices, they typically rely on transmitting fixed-size representations, lacking adaptability to dynamic network conditions and failing to fully exploit semantic redundancy. In this paper, we propose a progressive semantic communication framework for edge-cloud VLM inference, using a Meta AutoEncoder that compresses visual tokens into adaptive, progressively refinable representations, enabling plug-and-play deployment with off-the-shelf VLMs without additional fine-tuning. This design allows flexible transmission at different information levels, providing a controllable trade-off between communication cost and semantic fidelity. We implement a full end-to-end edge-cloud system comprising an embedded NXP i.MX95 platform and a GPU server, communicating over bandwidth-constrained networks. Experimental results show that, at 1 Mbps uplink, the proposed progressive scheme significantly reduces network latency compared to full-edge and full-cloud solutions, while maintaining high semantic consistency even under high compression. The implementation code will be released upon publication at https://github.com/open-ep/ProSemComVLM.

Federated fine-tuning provides a practical route to adapt large language models (LLMs) on edge devices without centralizing private data. However, in mobile deployments, the training wall-clock is often dominated by straggler-limited uplink communication under heterogeneous bandwidth, intermittent participation, and non-IID client data. Although parameter-efficient fine-tuning (PEFT) methods such as LoRA and QLoRA reduce local memory and trainable parameters, repeated transmission of adapter updates remains a major bottleneck. We propose Fed-FSTQ, a semantic-sensitivity-aware communication-control primitive for communication-efficient federated LLM fine-tuning. Fed-FSTQ uses a lightweight token-level Fisher proxy to estimate semantic sensitivity, couples token-guided sparsification with mixed-precision adapter-update quantization, and allocates higher communication fidelity to semantically load-bearing evidence while suppressing redundant transmission. The method is drop-in compatible with standard federated PEFT pipelines and requires no change to the server aggregation rule. Experiments on multilingual QA and medical QA under non-IID partitions show that Fed-FSTQ reduces cumulative uplink traffic required to reach a fixed quality threshold by 46-fold relative to a Fed-LoRA baseline and improves straggler-limited wall-clock time-to-accuracy by 52%. Under the corrected Controlled LTE-20Mbps accounting, Fed-FSTQ reduces per-round time from 414.60s to 67.29s and reduces per-round energy from 839.20J to 146.28J, yielding a 6.16-fold speedup. On NVIDIA Jetson-class edge devices, Fisher-guided token reduction also yields up to a 1.55-fold inference speedup, demonstrating deployability under tight resource constraints.

With the evolution of 6G, semantic communication has emerged as a promising paradigm by prioritizing the delivery of task-relevant meaning over strict bit-level correctness. However, existing transport mechanisms still rely on explicit port headers and bit-level validation, making them vulnerable to header corruption and the resulting packet loss. To address this issue, this paper proposes a Semantic Port-Aware Adaptive-Rate Transmission Protocol (SPAT) for semantic communication. The proposed framework jointly embeds source and destination port information into semantic representations, thereby reducing dependence on explicit port headers while enabling robust port-aware transmission. Furthermore, a differentiated semantic processing mechanism is developed for uplink and downlink scenarios, where port identification is introduced for uplink service recognition and destination-aware conditional gating is designed for downlink selective decoding. In addition, an adaptive-rate controller is incorporated to dynamically adjust the number of transmitted semantic channels according to channel conditions and feature importance, thereby improving both robustness and transmission efficiency. Experimental results on the AFHQ and ImageNet-10 datasets, together with real-world experimental measurements, demonstrate that SPAT consistently outperforms TCP, UDP, and SITP in reconstruction quality across different SNRs while maintaining low-latency transmission.

Semantic Communication (SC) backdoor attacks aim to utilize triggers to manipulate the system into producing predetermined outputs via backdoored shared knowledge. Current SC backdoors adopt monomorphic paradigms with single attack target, which suffers from limited attack diversity, efficiency, and flexibility in heterogeneous downstream scenarios. To overcome the limitations, we propose SemBugger, a polymorphic SC backdoor. By dynamically adjusting the trigger intensity, SemBugger finely-grained controls over the SC knowledge to generate diverse malicious results from the system. Specifically, SemBugger is realized through a multi-effect poisoning-training framework. It introduces graded-intensity triggers to poison training data and optimizes SC systems with hierarchical malicious loss. The trained system's knowledge dynamically adapts to trigger intensity in inputs to yield target outputs, all while preserving transmission fidelity for benign samples. Moreover, to augment SC security, we propose a provable robustness defense that resists SemBugger's homogeneous attacks through a controlled noise mechanism. It operates via strategically adding noise in SC inputs, and we formally provide a theoretical lower bound on the defense efficacy. Experiments across diverse SC models and benchmark datasets indicate that SemBugger attains high attack efficacy while maintaining the regular functionality of SC systems. Meanwhile, the designed defense effectively neutralizes SemBugger attacks.

This paper presents a semantic-enhanced receiver framework for transmitting natural language sentences over noisy wireless channels using multiple short block codes. After ASCII encoding, the sentence is divided into segments, each independently encoded with a short block code and transmitted over an AWGN channel. At the receiver, segments are decoded in parallel, followed by a semantic error correction (SEC) model, which reconstructs corrupted segments using language model context. We further propose the semantic list decoding (SLD), which generates multiple candidate reconstructions and selects the best one via weighted Hamming distance, and a semantic confidence-guided HARQ (SHARQ) mechanism that replaces CRC-based error detection with a confidence score, enabling selective segment retransmission without CRC overhead. All modules are designed and trained using bidirectional and auto-regressive transformers (BART). Simulation results demonstrate that the proposed scheme significantly outperforms conventional capacity-approaching short codes and long codes at the same rate. Specifically, SEC provides approximately 0.4 dB BLER gain over plain short-code transmission, while SLD extends this to 0.8 dB. Compared to transmitting the entire sentence as a single long 5G LDPC codeword, our approach significantly improves semantic fidelity and reduces decoding latency by up to 90%. SHARQ further provides an additional 1.5 dB gain over conventional HARQ.

Real-time multimodal agents transport raw audio and screenshots using networking stacks designed for human receivers, which optimize for perceptual fidelity and smooth playout. Yet agent models act as event-driven processors with no inherent sense of physical time, consuming task-relevant semantics rather than reconstructing signals in real time. This fundamental difference shifts the transport goal from the technical problem of signal fidelity (Shannon-Weaver Level A) to the semantic problem of meaning preservation (Level B). This mismatch imposes significant overhead. In visual pipelines, screenshot upload accounts for over 60% of end-to-end action latency on constrained uplinks, and in voice pipelines, conventional transport carries massive redundancy, sending 43-64x more data than needed to maintain task accuracy. We present Sema, a semantic transport system that combines discrete audio tokenizers with a hybrid screen representation (lossless accessibility-tree or OCR text, plus compact visual tokens) and bursty token delivery that eliminates jitter buffers. In simulations under emulated WAN conditions, Sema reduces uplink bandwidth by 64x for audio and 130-210x for screenshots while preserving task accuracy within 0.7 percentage points of the raw baseline.

Generative semantic communication (SemCom) harnesses pretrained generative priors to improve the perceptual quality of wireless image transmission. Existing generative SemCom receivers, however, rely on maximum a posteriori (MAP) estimation, which fundamentally cannot preserve the data distribution and thus limits achievable perceptual quality. Moreover, current diffusion-based approaches using single-domain guidance face significant limitations: latent-domain guidance is sensitive to channel noise, while image-domain guidance inherits decoder bias. Simply combining both domains simultaneously yields an overconfident pseudo-posterior. In this paper, we formulate semantic decoding as a Bayesian inverse problem and prove that posterior sampling achieves optimal perceptual quality by preserving the data distribution. Building on this insight, we propose alternating dual-domain posterior sampling (ADDPS), a diffusion-based SemCom receiver that alternately enforces latent-domain and image-domain consistency during the sampling process. This alternating strategy decomposes joint posterior sampling into simpler subproblems, avoiding gradient conflicts while retaining the complementary strengths of both domains. Experiments on FFHQ demonstrate that the proposed ADDPS achieves superior perceptual quality compared with existing methods.

Generative image compression has recently shown impressive perceptual quality, but often suffers from semantic inconsistency at ultra-low bitrates (bpp < 0.05), limiting its reliable deployment in bandwidth-constrained scenarios such as 6G semantic communications. This inconsistency stems from incomplete guidance information, which introduces semantic ambiguity into the generation process and may lead to natural-looking but source-inconsistent content. In this work, we propose a Semantic-Disambiguation-Guided Generative Image Compression (SDGIC) framework to constrain diffusion-based reconstruction at ultra-low bitrates. Specifically, SDGIC compresses the source image into three compact and complementary guidance streams: a concise text caption for global semantics, a highly compressed image (HCI) for dense visual evidence, and Reconstruction-Aware Semantic Residual Tokens (RSRTs) for reconstruction-relevant residual semantics that remain ambiguous under the text caption and HCI conditions. The RSRTs are directly optimized toward the downstream denoising objective, enabling them to provide source-specific semantic constraints for disambiguating diffusion-based reconstruction. To inject these three guidance streams into the generation process effectively, we design a Dual-Path Conditioned Diffusion Decoder (DPCD), which uses cross-attention for semantic conditions and ControlNet residuals for dense visual guidance. Extensive experiments demonstrate that SDGIC improves semantic consistency at ultra-low bitrates while maintaining favorable perceptual quality, with a 23.4% reduction in AFINE on the CLIC2020 dataset.

Token communications (TokenCom) is an emerging generative semantic communication paradigm, where tokens serve as compact representation units across modalities. Their contextual dependencies can be exploited by pretrained large models for semantic recovery. In this paper, we propose token-domain multiple access (ToDMA), a large-model-driven semantic multiple access scheme for massive token communications. ToDMA integrates unsourced random access with context-aware token processing. It enables massive uncoordinated devices to transmit tokenized source representations over common uplink resources. Specifically, each token index is associated with a shared modulation codeword, exposing token-level structure to the receiver for context-aware recovery. At the receiver, compressed sensing is first employed to jointly detect active tokens and estimate their corresponding channel state information (CSI) from the superposed signals. The source token sequences are then reconstructed by exploiting the consistency of token-associated CSI across multiple token positions. In the presence of token collisions, some active tokens may remain unassigned, leading to missing entries in the reconstructed token sequences. To recover these tokens, candidate-restricted masked-token prediction is performed using pretrained contextual models, thereby leveraging token-level context to mitigate collision effects. Simulation results on both image and text transmission tasks demonstrate that ToDMA reduces access latency while maintaining favorable token recovery and semantic reconstruction quality, showing its scalability for semantic multiple access.

In this paper, we introduce token communications (TokCom), a large model-driven framework to leverage cross-modal context information in generative semantic communications (GenSC). TokCom is a new paradigm, motivated by the recent success of generative foundation models and multimodal large language models (GFM/MLLMs), where the communication units are tokens, enabling efficient transformer-based token processing at the transmitter and receiver. In this paper, we introduce the potential opportunities and challenges of leveraging context in GenSC, explore how to integrate GFM/MLLMs-based token processing into semantic communication systems to leverage cross-modal context effectively at affordable complexity, present the key principles for efficient TokCom at various layers in future wireless networks. In a typical image semantic communication setup, we demonstrate a significant improvement of the bandwidth efficiency, achieved by TokCom by leveraging the context information among tokens. Finally, the potential research directions are identified to facilitate adoption of TokCom in future wireless networks.

The growing demand for efficient semantic communication systems capable of managing diverse tasks and adapting to fluctuating channel conditions has driven the development of robust, resource-efficient frameworks. This article introduces a novel channel-adaptive and multi-task-aware semantic communication framework based on a masked auto-encoder architecture. Our framework optimizes the transmission of meaningful information by incorporating a multi-task-aware scoring mechanism that identifies and prioritizes semantically significant data across multiple concurrent tasks. A channel-aware extractor is employed to dynamically select relevant information in response to real-time channel conditions. By jointly optimizing semantic relevance and transmission efficiency, the framework ensures minimal performance degradation under resource constraints. Experimental results demonstrate the superior performance of our framework compared to conventional methods in tasks such as image reconstruction and object detection. These results underscore the framework's adaptability to heterogeneous channel environments and its scalability for multi-task applications, positioning it as a promising solution for next-generation semantic communication networks.

Semantic communications aim to enhance transmission efficiency by jointly optimizing source coding, channel coding, and modulation. While prior research has demonstrated promising performance in simulations, real-world implementations often face significant challenges, including noise variability and nonlinear distortions, leading to performance gaps. This article investigates these challenges in a multiple-input multiple-output (MIMO) and orthogonal frequency-division multiplexing (OFDM)-based semantic communication system, focusing on the practical impacts of power amplifier (PA) nonlinearity and peak-to-average power ratio (PAPR) variations. Our analysis identifies frequency selectivity of the actual channel as a critical factor in performance degradation and demonstrates that targeted mitigation strategies can enable semantic systems to approach theoretical performance. By addressing key limitations in existing designs, we provide actionable insights for advancing semantic communications in practical wireless environments. This work establishes a foundation for bridging the gap between theoretical models and real-world deployment, highlighting essential considerations for system design and optimization.