Forward-Looking Sonar

Sidescan sonar is a common sensor for both manned and autonomous marine exploration and mapping, yet very few methods build upon or exploit the geometric projection model of the sensor. As sidescan sonar is limited to a 1D range measurement, many approximations are frequently used, including the long-standing assumption of a flat seafloor. Rather than make similar approximations, this paper focuses on a multi-view geometry based approach and formalizes a two-view geometric constraint and proves that a shared feature is constrained to a locus within the intersection of a sphere and a plane. In addition, we characterize what governs the size of the ambiguity locus through Monte Carlo simulation that is grounded in real aperture and mounting geometry for both a surface vessel and an underwater vehicle. We translate additional simulations of relative trajectories for both vehicle platforms into concrete survey-planning guidance. Our results show that locus length is strongly governed by elevation misalignment, and peaks at a moderate oblique crossing angle of approximately 20 degrees, with minimal locus lengths obtained at near parallel and anti-parallel passes.

Autonomous underwater navigation typically relies on complex and expensive multi-modal sensor suites designed to prioritize global Simultaneous Localization and Mapping (SLAM) accuracy. However, local reactive behaviors such as coarse navigation and obstacle avoidance require only local consistency---a capability that should be feasible using only a Forward-Looking Sonar (FLS), yet remains largely unaddressed, leaving a critical gap in FLS-only local SLAM. Moreover, existing acoustic SLAM frameworks predominantly rely on sparse feature extraction methods that discard substantial portions of the already information-sparse acoustic returns. To overcome these limitations, this work introduces a dense direct registration approach that aligns full acoustic intensity scans to a recursively updated local map. Real-time execution is achieved via an Inverse Compositional Gauss-Newton optimization strategy that minimizes computational overhead. Experimental evaluations show that this dense method yields significant improvements on translation error compared to sparse keypoint baselines, maintaining stable sub-meter tracking precision over wide displacement gaps. Moreover, this approach delivers odometry performance comparable to multi-sensor fusion pipelines (FLS, DVL, and IMU), bypassing expensive payload dependencies in feature-rich environments. We validate real-world applicability through AUV field trials, running the full local SLAM approach onboard an embedded, resource-constrained computer.

Ultrasound is the most widely deployed imaging modality worldwide, yet clinical AI remains fragmented into narrow single-task models that fail when device, operator, or anatomy changes. Here we present SonoCorpus, an open resource unifying 456,963 images and 1,626,085 expert masks from 53 public datasets spanning 24 clinical applications and 17 countries, and SonoBase, an interactive segmentation foundation model pretrained on it. Across fifteen evaluation datasets introducing new organs, devices, operators, and geographies, SonoBase outperforms SAM2, MedSAM2, and the concept-promptable MedSAM3 on every dataset and matches per-dataset specialist models trained on the same data; on fully external data it exceeds the accuracy these baselines achieve on their own in-distribution benchmarks. Ejection fraction derived from its segmentations falls within inter-observer variability (6.63% error), with fewer misclassifications at the defibrillator-candidacy threshold than either promptable baseline (13% versus 18--42%); fetal head-circumference (1.81~mm) and gestational-age (1.2 days) errors fall below inter-observer variability. Where a baseline fails outright, one in four test cases, SonoBase recovers a usable segmentation in 81% of them, including on handheld probes operated by minimally trained users in two low- and middle-income countries (Sierra Leone and Tanzania). Five labeled examples can help the model adapt to a new setting, and the identical training protocol transfers well to newer models such as SAM3, locating the advantage in ultrasound-specific pretraining rather than any single architecture. To ensure reproducibility and enable the community to build on SonoBase as a platform, we release all checkpoints, optimizer states, data-split indices, deduplication hashes, and starter code.

Synthetic data can reduce the cost of collecting and annotating training data for robotic perception, but generating sensor observations that preserve the characteristics relevant to downstream perception remains challenging, particularly for sonar imagery. In this work, we investigate whether conventional image-fidelity metrics adequately reflect the downstream perception performance of GAN-generated synthetic sonar data. We employ a Pix2Pix conditional generative adversarial network with four discriminator configurations characterized by different receptive fields: PixelGAN, PatchGAN-16, PatchGAN-70, and ImageGAN. The models are trained using sonar imagery from two datasets and evaluated using conventional image-fidelity metrics, including Structural Similarity Index (SSIM), Peak Signal-to-Noise Ratio (PSNR), and Mean Squared Error (MSE). To complement these pixel-level measures with task-oriented evaluation, YOLOX-S, YOLOX-L, and Faster R-CNN detectors are trained exclusively on real sonar imagery and subsequently evaluated on the GAN-generated images using identical test samples and annotations across all discriminator configurations. The results reveal a discrepancy between image-fidelity and downstream object-detection performance: the configuration achieving the best SSIM, PSNR, and MSE does not consistently yield the best detection performance. In particular, PatchGAN configurations achieve strong downstream detection results despite not achieving the highest pixel-level similarity scores. These findings suggest, for the datasets and models considered, pixel-level image-fidelity metrics alone may not consistently capture the task-relevant realism of synthetic sonar observations and motivate the use of task-aware evaluation for synthetic sensor data intended for robotic perception.

Underwater acoustic target recognition has converged on closed-set classification by vessel type, a task that does not answer whether a monitoring system has heard this hull before. We formalise open-set, cross-passage vessel re-identification on public hydrophone data and specify a protocol that removes the two easiest routes to a high score: hull-disjoint splits keyed to MMSI/IMO, galleries and queries from disjoint passages of each hull, source-pure galleries, and an audio-adjudicated transit-deduplication gate. We describe SKANN, a raw-waveform encoder whose front end is a four-scale bank of learned filters fused by selective-kernel attention, trained with an angular-margin objective and an augmentation regime that perturbs recording chain, ambient noise and multipath while preserving the narrowband lines that carry identity. On a 40-hull IARA gallery (96 queries, 98 passage candidates), cross-passage rank-1 is 0.25 for the embedding and 0.26 for an automated narrowband-tonal comparator; the two are statistically indistinguishable at the top of the ranking, the embedding orders the rest of the list more reliably (AUC 0.82 vs 0.76), and their score fusion reaches rank-1 0.35 -- the only contrast that attains nominal significance, presented as evidence of partial complementarity, not as a recommendation. Transit deduplication alone removes a 16-21 point apparent rank-1 advantage, larger than any between-method difference. Two further findings delimit what public data can support: ShipsEar cannot separate hull identity from recording channel under an identity protocol, and cross-network fine-tuning helps vessels seen during fine-tuning but is a null result on unseen ones. The results support analyst triage over a ranked shortlist, not identification. Checkpoint, validation embeddings, transit map and per-query outputs are released under CC-BY-4.0 (doi:10.5281/zenodo.22160138).

Synthetic Aperture Sonar (SAS) is core for wide-area detection of small underwater targets. However, large-scale, high-quality SAS datasets are scarce, hindering data-driven recognition. Existing benchmarks are small and limited to single scenarios, failing to reproduce complex acoustic scattering, diverse seabeds, and multi-pose imaging in real detection. To fill this gap, we introduce SCTD 3.0 - a large-scale real-measured dataset for Sonar Common Target Detection in the Wild in natural waters. It contains over 10,000 high-quality real SAS image snippets from multi-frequency systems (240 kHz, 450 kHz, and others), covering ten typical target categories across varied seabed geomorphologies, with multiple observation angles, detection ranges, and frequency bands. We establish a rigorous hierarchical annotation protocol that decouples labeling of intrinsic physical properties, deployment characteristics, and scattering phenomena - covering material, geometry, internal structure, burial state, shadow integrity, specular highlights, edge diffraction, and resonance effects. This enables fine-grained target characterization. We also construct a multi-task benchmark for object detection, fine-grained classification, and attribute prediction, evaluating mainstream deep learning models under cross-domain, cross-scene, cross-frequency, and cross-view generalization. SCTD 3.0 is expected to provide a critical data cornerstone for robust underwater target perception in open-water environments. SCTD 3.0 is available at https://github.com/automlresearch/SCTD-3.0.

Recent incidents of accidental damage and suspected sabotage to submarine telecommunication and power cables, particularly in the Baltic Sea, have underscored their vulnerability and the need for continuous monitoring solutions. Distributed acoustic sensing (DAS) applied to submarine optical-fiber cables enables wide-area monitoring of underwater acoustic activity. We present the Marlinks-NS DAS dataset, comprising processed submarine DAS measurements and AIS-derived vessel information curated for cable-protection research. The dataset defines two machine-learning tasks (vessel detection and vessel-to-cable distance estimation) allowing reproducible research under realistic marine conditions. The dataset contains 74,771 labeled data instances from ten days of continuous recording along a 2,554 m segment in a 28 km buried fiber-optic cable in the North Sea. Each instance includes spectral-energy features from 250 sensing channels, together with anonymized distance measurements and metadata from AIS information. The released HDF5 data, documentation, processing description, and example code support reproducible development and evaluation of DAS-based vessel-monitoring methods for submarine cable protection.

The Duke Robotics Club presents Oogway and Crush, our AUVs for RoboSub 2026. This year's strategy expands on our previously narrowed scope, targeting all four of RoboSub's design goals for the first time: movement, vision, manipulation, and acoustic tracking. This expansion is based on sustained reliability investment across all three subsystems. Mechanically, Crush gained two additional thrusters and a CFD-optimized case, providing pitch stability. Electrically, we addressed accumulated failure points by repairing unreliable connections and upgraded thruster control hardware. We also redesigned our acoustics system, adding a new custom PCB with higher-order filters, significantly improving pinger detection reliability. On the software side, improvements to state estimation, sonar-based object detection, vision-driven task planning, and IVC enable more capable and coordinated autonomous runs. Paired with investments in our testing infrastructure to maximize our limited pool time, we can now attempt a broader set of tasks while maintaining the reliability our competition strategy demands.

Long-duration passive acoustic deployments produce large archives of recordings that are not linked to vessel tracks or encounter structure, leaving range and contact conditions unavailable as variables and requiring manual selection for analysis. To address this limitation, we propose a database-native workflow that aligns hydrophone recordings with Automatic Identification System (AIS) position reports to produce distance-resolved data. Fixed-duration recording windows and AIS messages are stored as persistent geospatial tables and associated through an indexed spatiotemporal join, replacing in-memory nested iteration with a single scalable set-based database process capable of handling continuous, multi-year, million-window archival deployments without exhausting available memory. In this study, the approach processes approximately 9.5x10e5 recording windows and 6.9x10e6 AIS position reports, producing a structured table that separates no-contact, single-contact, and two-contact windows, with the closest point of approach computed directly where applicable and background conditions characterized via deterministic spectral ranking. This formulation enables a GeoAI framework in which spatially indexed, queryable data become directly usable for machine learning. The resulting data product reveals predominantly noise-dominated conditions, with vessel contributions emerging mainly at shorter ranges, indicating that the task lies in extracting structure under background-limited regimes. Spectrogram and quantitative analyses show weak tonal signatures embedded in noise and a consistent decay of signal-to-noise ratio with distance, supporting the use of this representation for scalable machine learning, similarity analysis, and predictive acoustic modelling in real maritime environments.

Passive hydroacoustic monitoring often generates large volumes of continuous recordings that are only partially exploited due to the cost of manual annotation. Supervised detection methods perform well but require large labeled datasets, seldom available for rare signals or understudied environments. This work proposes a self-supervised exploration pipeline to address this limitation in low-frequency settings. A Masked AutoEncoder (MAE) is pre-trained on a reconstruction pretext task, then used to extract patch-level representations from spectrograms. Within each spectrogram, adjacent informative patches are aggregated into event-level embeddings, enabling the disentanglement of overlapping events. These embeddings are then clustered at the dataset scale using the dimension reduction algorithm UMAP and the clustering algorithm HDBSCAN to identify hydroacoustic patterns. The pipeline was applied to a multi-year hydroacoustic dataset collected near Mayotte Island, Indian Ocean, containing marine mammal vocalizations, seismo-volcanic signals, and anthropogenic noise. The 317 clusters were manually mapped to 15 hydroacoustic classes or noise in less than one hour. The method was evaluated in two ways. Quantitatively, when used as a classifier, it achieved performance comparable to two existing detectors. Qualitatively, it recovered known seasonal patterns of marine mammal acoustic activity. It also identified patterns of previously unstudied signals, thereby demonstrating its practical value.

We present a fully unsupervised Fast-Slow DSVDD detector for continuous State-of-Polarization monitoring on a deployed subsea cable. Trained without event labels, it ranks all five confirmed trawler contacts within the top 13 of 122,174 recordings and surfaces additional corroborated cable-contact events.

This paper offers an in-depth analysis of non-sequential multimodal sentence-level embeddings, with a particular focus on the SONAR model. We demonstrate that certain embedding dimensions are sensitive to perturbations and can serve as indicators of decoding anomalies. By leveraging the consistency between successive encoding and decoding, we successfully build an accurate detector. Additionally, we explore modifying specific dimensions of interest to attempt to correct them. This work underscores the importance of understanding and analyzing the embeddings themselves to enhance the reliability of multimodal representations.

Reliable navigation in underwater environments remains a key challenge in marine robotics. In such scenarios, forward-looking sonars are a natural choice for long-range perception, offering wide coverage even in turbid, low-visibility conditions. However, sonar images are inherently noisy, contain artifacts, and lack rich semantic structure, causing standard computer vision methods for keypoint detection and matching to perform poorly. In this paper, we introduce ISOPoT, an imaging sonar odometry method based on modern point tracking techniques. We propose a sonar odometry pipeline that uses multi-frame point tracks as its primary correspondence representation, augmented with lightweight optimizations to improve robustness. We evaluated the proposed method on the Aracati 2017 dataset, as well as on an internal sonar dataset collected in real-world underwater environments. Our results show that ISOPoT outperforms previous state-of-the-art methods consistently in both sonar-only scenarios and in multi-sensor settings.

Researchers tag and track marine animals to study migration patterns, human impacts on behavior, and behavioral shifts due to climate change. Accurate data collection often requires tagging individual animals to collect spatio-temporal state estimates of the animal's geo-position and depth. Acoustic transmitters are prominent due to their continuous communication without requiring retrieval or surfacing to collect data. These transmitters emit underwater acoustic pulses that can be detected by hydrophones. However, the frequent movement of aquatic animals results in high data loss when the animal moves out of the detection range of a stationary hydrophone. Autonomous underwater vehicle (AUV) systems offer a solution for localizing transmitters with higher resolution over longer periods of time. Such systems previously deployed have often required multiple hydrophones mounted on a large frame carried by the AUV. This increases drag, limiting the speed at which the AUV can track highly mobile animals. This work provides an alternative by equipping multiple AUVs with a single compact hydrophone payload. A particle filter algorithm equipped with a hidden Markov model (HMM) behavioral motion model fuses measurements from multiple AUVs to estimate the transmitter's position. Real-world data shows a root mean square error (RMSE) of approximately 10 meters for short-term deployments, and a larger simulated dataset shows an RMSE of approximately 15 meters for longer deployments over a larger area. The HMM fit to historical animal movement data outperforms a generic velocity motion model, and both outperform a baseline random walk motion model.

Karst aquifers provide critical freshwater resources but pose significant hazards due to their complex and poorly understood subsurface geometry. Mapping these environments is challenging because sonar data from underwater exploration is sparse and noisy, while navigation estimates suffer from drift limiting standard 3D reconstruction methods. We present a pipeline for reconstructing underwater karst conduits from a sonar profiler. We combine a continuous-time SLAM approach to correct trajectory drift with a novel two-stage deep learning method for surface reconstruction, producing an immersive and navigable 3D mesh for hydrogeological analysis.

This paper presents a hybrid model-based and model-free framework for active multi-view target recognition using forward-looking sonar. A convolutional neural network (CNN) provides data-driven observation likelihoods, while Radon-based orientation estimation enables viewpoint-aware sensing without requiring angle annotations. During training, an information-gain-based reward guides a Proximal Policy Optimization (PPO) agent to learn a belief-aware viewpoint selection policy offline. At deployment, the learned policy performs real-time viewpoint selection using only CNN-based belief updates, eliminating the need for computationally expensive online POMDP tree search. Experiments on a marine-debris forward-looking sonar dataset demonstrate that the proposed approach achieves competitive recognition accuracy while reducing sensing steps and motion cost compared to model-based baselines.

Unmanned Aerial Vehicle (UAV) multispectral point clouds (MPC) provide high-dimensional spatial-spectral data for sub-canopy target detection; however, their efficacy is significantly compromised by severe illumination heterogeneity caused by vegetation shadows. To address this, we propose a prior-free anomaly detection framework capable of robustly handling lighting variations. First, we formulate solar angle estimation as an inverse optimization problem. By coupling spectral indices with a ray-tracing model, this strategy achieves Prior-Free Shadow Extraction without relying on flight metadata, effectively distinguishing dark objects from true shadows. Second, to mitigate spectral distortions, we introduce an Illumination-Consistent Sparse Representation mechanism. Unlike standard reconstruction methods, we construct a background dictionary strictly from neighbors sharing the same illumination state. This constraint effectively disentangles spectral reflectance from lighting variations, ensuring that targets are represented solely by physically consistent background points. Experimental results indicate that the proposed method significantly improves the separability between anomalies and background in complex forest environments, demonstrating superior performance over state-of-the-art baselines. This framework is particularly suited for identifying camouflaged military targets, mapping fallen tree trunks, and uncovering archaeological ruins hidden beneath dense foliage.

As underwater robotics research increasingly addresses complex 3D perception and autonomous navigation, the fidelity of sonar simulation has become a key factor in algorithm development. Current simulation frameworks typically rely on geometry-driven rendering, approximating 3D sonar as an underwater equivalent to LiDAR, which fails to account for fundamental acoustic phenomena such as refraction, multi-path interference, and phase-dependent signal formation. This paper proposes a modular architecture for realistic 3D sonar simulation that integrates GPU-accelerated graphics engines with physically grounded acoustic propagation principles. We implement a volumetric 3D sonar model within the NVIDIA Isaac Sim environment, modeled after the Water Linked 3D-15 sensor, and integrate it into a comprehensive underwater simulation framework. The system is validated through a hardware-in-the-loop configuration, where a modified FastLIO2 SLAM pipeline, executed on an NVIDIA Jetson Orin Nano, performs sensor fusion using synthetic 3D sonar, DVL, IMU, and pressure data. Finally, a qualitative comparison between simulated outputs and real-world data from harbor sheet-pile inspections is provided, characterizing the remaining sim-to-real gap and establishing a roadmap toward fully acoustics-driven volumetric sensing.

Underwater robots typically use both cameras and sonar for perception to leverage the rich semantic details of vision and the robust range measurements of acoustics. However, learning to map between these modalities via cross-modal prediction remains underexplored due to limited sonar-visual paired datasets. We present SOVIS, a sonar-visual dataset for cross-modal underwater perception. SOVIS comprises over 76,000 paired frames collected across 17 dives at six sites in the Trondheimfjord, supported by an end-to-end pipeline that cleans and synchronizes the cross-modal sensor data. We also introduce an interactive annotation tool designed to accelerate the labeling process for this paired data. Finally, we demonstrate a proof-of-concept cross-modal fish detection task using a small subset of labeled data, achieving a 7x improvement in mAP@0.10 over a monocular camera baseline. SOVIS serves as the first step toward advancing cross-modal underwater perception research, enabling research directions such as dense sonar prediction from monocular images.

Sonar imaging is the primary modality for underwater target detection, yet small targets remain difficult to detect due to insufficient pixel coverage, low acoustic contrast, and scale ambiguity across imaging ranges. CNN-based detectors extract local features efficiently but cannot suppress noise-induced false alarms without global acoustic context. Transformer-based methods capture long-range dependencies at quadratic computational cost. Existing Mamba-based vision models offer efficient linear-cost scanning but lack multi-scale semantic alignment across pyramid levels, multi-receptive-field fusion, and small-target-aware training supervision needed for reliable sonar detection. This letter proposes Mamba Dilated-Scale Fusion (MambaDSF), a hybrid framework addressing these limitations through three contributions: a Mamba Enhanced Feature Pyramid (MambaEFP) backbone that jointly captures local echo cues and global acoustic context at linear complexity; a Dilate Fusion Mamba (DFMamba) encoder that enforces multi-scale feature alignment across pyramid levels; and Scale-Adaptive Weighted IoU (SA-WIoU) and Cross-Scale Coherence (CSC) losses that stabilize small-target training. MambaDSF achieves 91.5% mAP50 on the UATD forward-looking sonar benchmark with 28.7 million parameters, surpassing all compared detectors. On a small-target subset the gain reached +2.2 percentage points, and cross-domain evaluation on FLS and MD-FLS confirms the generalization of the proposed architecture. The codes are publicly available at https://github.com/IDontKnowAAA/MambaDSF.

This letter introduces a physics-informed self-supervised framework for sonar image despeckling that reformulates despeckling as residual consistency in the homomorphic log domain. By constraining the log-ratio residual to obey multiplicative speckle statistics, the proposed method eliminates the need for clean supervision while preventing degenerate identity solutions. A variance-targeted statistical loss combined with edge-aware structural regularization and median-guided curriculum stabilization enables effective speckle suppression with preserved structural fidelity. This formulation along with a lightweight neural network achieves state-of-the-art performance across multiple real sonar datasets and demonstrates excellent cross-dataset robustness, while remaining suitable for real-time deployment.

Sonar is often the only modality suitable for high-resolution imaging underwater due to light attenuation and turbidity. Forward-looking imaging sonar provides measurements over range and horizontal angle but collapses vertical structure into a flat image, creating ambiguities that make 3D recovery challenging. A common use case for imaging sonar is underwater terrain mapping (bathymetry), yet current methods require many views, expensive multi-sensor setups, or significant training data, which limits use and adaptability to new environments. We present a training-free method that recovers bathymetry from a single sonar image in under 30 seconds via differentiable rendering, conditioned on a known seafloor tilt. To our knowledge, this is the first differentiable rendering approach for single-view height recovery in sonar. Our method implements differentiable sonar ray tracing and optimizes an explicit height field to reproduce the target image. On synthetic datasets, our approach outperforms a supervised CNN under distribution shift and remains close on rough terrain, while the CNN wins in-distribution. By modeling physically grounded priors of the sonar process, our method adapts across sensor configurations and environments without training data.

Synthetic sonar datasets offer a scalable alternative to costly real-world acquisition, yet their utility remains limited by the absence of rigorous quantitative validation. We present ACOUSIM (ACOustic SIMulation and Validation Platform), a physics-informed framework that evaluates the statistical alignment between synthetic and real sonar imagery without relying on generative models. A Gazebo-based environment generates sonar-like images by explicitly controlling seabed texture, illumination-driven shadowing, platform altitude, and noise. Realism is quantified against two public sonar datasets, SeabedObjects-KLSG-II and Sonar Common Target Detection (SCTD), using global intensity and local texture (LBP) distributions assessed via Kullback-Leibler divergence, Jensen-Shannon divergence, and Earth Mover's Distance. Results show strong texture alignment (KL < 0.07) across all classes, with plane-class intensity alignment outperforming ship-class due to shadow geometry complexity. ACOUSIM establishes a reproducible, distribution-level baseline for sim-to-real sonar evaluation and directly supports reliable dataset validation for underwater image analysis.

Surface-level marine debris remains a practical bottleneck for autonomous clean-up, where small, reflective targets (e.g., aluminum cans) must be detected at distance under glare, ripples, and partial submersion. This paper presents, an ASV vision system and a new surface-can dataset. The dataset comprises ~7.3k raw images extracted from videos and annotated with bounding boxes, expanded via ten augmentation types to ~57k training/validation images spanning diverse lighting and water states. A family of detector and detector-tracker pipelines tailored to surface operations were benchmarked. Training YOLOv11 on CANSURF boosts performance 12x over generic datasets, highlighting the dataset's value. Experiments show that YOLOv11+ByteTrack yields the most stable tracks (fewer identity switches) and stronger multi-object accuracy under, while YOLOv11+SAHI increases recall on far-field cans at the cost of lower precision in full-context inputs. Given the mission profile, single-can pickup with approach and grab, YOLOv11 + SAHI proves better for detecting the maximum number of cans. No prior open dataset targets aluminum cans on water from a surface-level viewpoint; this dataset fills this gap and supports reproducible evaluation.

This paper introduces a novel automatic coverage path planning algorithm for bathymetry surveying with unmanned surface vehicles. The detection range of the mapping sensor employed - a multibeam echo sounder - is heavily influenced by local seafloor depths. Hence, a path designed to uniformly cover the sea surface does not guarantee uniform coverage of the seafloor. Yet this is currently the typical process for bathymetric surveys, with the simplistic boustrophedon scheme along manually selected waypoints at constant depths being the most widespread planner used. The proposed scheme incorporates coarse prior depth information to pre-process the target region and adaptively guide path generation and sensing range configuration. By explicitly accounting for depth variations, the proposed algorithm designs a coverage path with optimised spacing between survey passes that adjusts the sensing beam aperture to achieve more consistent seafloor coverage. The proposed method is shown to offer significant improvements in both synthetic and real-world scenarios. Validations in challenging synthetic terrains achieves coverage ratios beyond 99%, a marked improvement when compared with traditional boustrophedon paths revealing a maximum 75% coverage. The same trend appears in realistic simulations using real bathymetric data from a coastal harbour, with coverage reaching over 92%, and significantly surpassing boustrophedon sweeps with coverage rates below 65%. Beyond improved performance, the scheme also brings a fully automated design, suitable for autonomous marine vehicles, thus offering practical utilities for real-world applications.

Self-supervised learning (SSL) has emerged as a promising approach to seismic data denoising as it does not require clean reference data. In this work, the deployment of the Noisy-as-Clean (NaC) method was evaluated for real seismic data denoising under controlled conditions. Two independent seismic acquisitions, each comprising noisy and filtered data, were organized into four real datasets. The NaC SSL method was adapted to add real noise to the noisy input, controlled by a parameter. An experimental protocol with ten experiments was designed to compare different strategies for deploying the NaC SSL method with the supervised learning baseline, using identical network topology and hyperparameters. The models were evaluated in terms of denoising performance, computational cost, and generalization capability. The results show that the synthetic additive white Gaussian noise (AWGN) is inadequate for the denoising of seismic data within the NaC method, and performance strongly depends on the compatibility between the injected and actual noise characteristics. Furthermore, both the characteristics of the seismic data and the noise level influence the performance of the model. Self-supervised fine-tuning on test data has improved SSL performance, whereas no such gain was observed for fine-tuning of supervised models. Finally, NaC has shown to be a simple, effective, and model-independent method that offers a feasible solution for the denoising of real seismic data.

Scientists increasingly rely on sensor-based data, yet transforming raw streams into insights across the edge-to-cloud continuum remains difficult. Provisioning heterogeneous infrastructure and managing execution on emerging platforms like Data Processing Units typically requires cross-domain expertise, creating significant barriers to rapid prototyping. This paper introduces an experience-driven methodology for the rapid development of sensor-driven applications. By combining pattern-based workflow engineering with AI-assisted development-implemented via Pegasus on the FABRIC testbed - we utilize an existing Orcasound hydrophone workflow as a reusable template. We introduce a pattern-based engineering methodology to generate and refine workflows for air quality, earthquake, and soil moisture monitoring. Furthermore, we show how these abstract structures are extended to edge resources through modular configuration and placement. Our evaluation focuses on user productivity and practical lessons rather than peak performance. Through these case studies, we illustrate how AI-assisted, pattern-based development lowers the entry barrier for non-experts and enables iterative exploration of sensor-driven applications across distributed infrastructures.

Accurate seabed mapping is essential for habitat monitoring and infrastructure inspection. In turbid, shallow coastal waters, such as shellfish aquaculture farms, the effectiveness of traditional optical methods is limited. Autonomous surface vehicles (ASVs) equipped with forward-looking sonar (FLS) offer a promising alternative. However, existing sonar-based systems face challenges in achieving fine resolution mapping over long trajectories due to low-resolution positioning measurements and accumulated drift over long trajectories. In this paper, we present a drift-resilient seabed mapping framework that integrates local FLS frame alignment using the Fourier-Mellin transform (FMT) with global trajectory optimization based on an extended Kalman filter (EKF) that fuses global positioning system (GPS), inertial measurement unit (IMU), and compass data. A variance-based image blending strategy is used to further reduce visual artifacts in overlapping regions. Field trials on a structured oyster farm site show that our framework helps reduce drift in RMSE by 9.5% relative to the FMT-only baseline. This framework also enables sub-meter reconstruction accuracy and preservation of high-resolution textures needed for oyster inventory estimation within the mapped areas.

Retrieval-augmented generation and tool-integrated LLM agents increasingly depend on external textual sources. This reliance broadens the available attack surface, allowing adversaries to insert malicious instructions that trigger unintended model behaviors. Current defensive measures often utilize LLM-based detectors to filter such content, but these approaches remain vulnerable to optimization-based attacks. Additionally, training-based methods frequently fail to generalize to novel data distributions. To resolve these issues, we introduce SONAR, a prompt sanitization framework that identifies and removes injected content using metrics from natural language inference. Specifically, SONAR constructs a sentence-level relational graph across the user query and external data. By using entailment and contradiction scores as edge weights, the system identifies sentences that deviate from the core task. It then employs connectivity-driven pruning to eliminate flagged injection seeds and their related neighbors while maintaining benign context. Rigorous evaluations across several models and datasets show that SONAR reduces the attack success rate to nearly zero, significantly outperforming nine established baseline defenses.

Benthic habitat mapping is fundamental for understanding marine ecosystems, guiding conservation efforts, and supporting sustainable resource management. Yet, the scarcity of large, annotated datasets limits the development and benchmarking of machine learning models in this domain. This paper introduces a thorough multi-modal dataset, comprising about a million side-scan sonar (SSS) tiles collected along the coast of Catalonia (Spain), complemented by bathymetric maps and a set of co-registered optical images from targeted surveys using an autonomous underwater vehicle (AUV). Approximately 36000 of the SSS tiles have been manually annotated with segmentation masks to enable supervised fine-tuning of classification models. All the raw sensor data, together with mosaics, are also released to support further exploration and algorithm development. To address challenges in multi-sensor data fusion for AUVs, we spatially associate optical images with corresponding SSS tiles, facilitating self-supervised, cross-modal representation learning. Accompanying open-source preprocessing and annotation tools are provided to enhance accessibility and encourage research. This resource aims to establish a standardized benchmark for underwater habitat mapping, promoting advancements in autonomous seafloor classification and multi-sensor integration.

3D human mesh reconstruction (HMR) from RGB images often degrades under poor illumination, occlusion, and non-line-of-sight conditions. Acoustic sensing provides complementary spatial cues but suffers from low spatial resolution. We propose SonicMesh, which, to the best of our knowledge, is the first acoustic--visual framework for robust 3D human mesh reconstruction. SonicMesh first converts ultrasonic echoes into range--azimuth acoustic images through an Inverse Synthetic Aperture Radar (ISAR)-based imaging process. It then introduces a cross-dimensional anatomical registration module that maps modality-specific 2D joint features into a common canonical 3D human space. The registered anatomical representations are further integrated with acoustic and visual features through a two-stage fusion network for final mesh reconstruction. Experiments demonstrate that SonicMesh achieves accurate and robust 3D human reconstruction across normal, poor-light, occluded, and non-line-of-sight environments, consistently outperforming existing RGB-, radio-frequency (RF)-, and mmWave-based approaches under challenging sensing conditions.