Convolutional Neural Networks

Waste classification models have become highly accurate at sorting waste, often exceeding 95% on benchmark datasets. However, these models fail to account for contamination in recyclable waste. We present EcoBin, a two-stage deep convolutional neural network that classifies household waste by its disposal pathway and that explicitly accounts for contamination. The first stage is a base waste classifier built on an EfficientNetV2-S backbone that assigns each of the thirty waste categories in our dataset to one of four disposal pathways. The second stage is a contamination classifier that inspects any item routed toward recycling and overrides the decision to garbage when contamination is detected. Because no public dataset of contaminated recyclables exists, we synthesize one by segmenting images of clean recyclable objects with a U2-Net model and compositing realistic contamination textures onto their surfaces. The first stage achieves 87.42% test accuracy and a 96.13% pathway-adjusted accuracy. Meanwhile, the contamination stage distinguishes clean from contaminated items with a 0.99 ROC-AUC. On a test set of contaminated recyclables, the complete pipeline routes 24 of 25 items correctly, compared with only 1 of 25 for the base classifier alone. A McNemar's test confirms that the improvement contributed by the contamination stage is statistically significant (p < 0.001).

Steerable convolutional neural networks (Steerable-CNNs) guarantee SE(3)-equivariance by parameterizing kernels as linear combinations of steerable basis functions, but their deterministic nature precludes uncertainty quantification - limiting their use in settings where confidence estimates are essential. We propose a Bayesian Steerable-CNN that places posterior distributions over the basis coefficients, yielding stochastic kernels while preserving equivariance exactly. The loss function of the model is obtained via variational inference and minimized by Bayes-by-Backpropagation. The framework admits a decomposition of predictive uncertainty into epistemic and aleatoric components. Empirically, the model attains competitive classification accuracy alongside an expected calibration error of 0.0263 and outperforms its deterministic counterpart by up to 6.17% under distributional shift induced by additive Gaussian noise. Furthermore, we leverage the model's uncertainty estimates to enhance its performance significantly, achieving a notable gain - approximately 4% higher accuracy across 84% of the test dataset. A statistically significant negative correlation between epistemic uncertainty and prediction error confirms that the learned posterior variance is semantically meaningful. The framework unifies Bayesian uncertainty quantification with the inductive bias of equivariant CNNs.

This paper presents a hybrid model-based and model-free framework for active multi-view target recognition using forward-looking sonar. A convolutional neural network (CNN) provides data-driven observation likelihoods, while Radon-based orientation estimation enables viewpoint-aware sensing without requiring angle annotations. During training, an information-gain-based reward guides a Proximal Policy Optimization (PPO) agent to learn a belief-aware viewpoint selection policy offline. At deployment, the learned policy performs real-time viewpoint selection using only CNN-based belief updates, eliminating the need for computationally expensive online POMDP tree search. Experiments on a marine-debris forward-looking sonar dataset demonstrate that the proposed approach achieves competitive recognition accuracy while reducing sensing steps and motion cost compared to model-based baselines.

This work demonstrates a full reproduction and extension of MNet, a hybrid 2D/3D convolutional network designed for anisotropic medical image segmentation. The original architecture was re-implemented within the nnU-Net framework to verify its reported performance and robustness to variable voxel spacing, known as anisotropy. Experiments were conducted on PROMISE prostate MRI and a controlled subset of LiTS liver CT under matched preprocessing and compute constraints. The reproduced MNet achieved a Dice similarity coefficient (DSC) of 89.0 +/- 0.9% on PROMISE, within 0.8% of the published result, and 94.3 +/- 1.9% / 54.6 +/- 3.1% for liver and tumor segmentation on LiTS, respectively. Two lightweight extensions were further introduced: (1) a learned Fusion Gating mechanism enabling adaptive 2D-3D feature blending, and (2) a VMamba state-space module for efficient long-range depth modelling. The Spatial Gating variant improved DSC by +0.8% with less than 3% inference overhead, while VMamba improved performance consistency, reducing PROMISE Dice variation to +/- 0.7% and achieving the strongest LiTS liver performance at 95.8% Dice. Both extensions preserved MNet robustness to anisotropy, with delta Dice = 1.5% across 1-4 mm voxel spacing. Overall, the study confirms MNet reproducibility and demonstrates that adaptive fusion and state-space modelling have the potential to further strengthen segmentation reliability under anisotropic conditions. However, further tests are required to provide definitive conclusions.

In this paper, we propose SGFormer++, a novel Semantic Graph Transformer for 3D scene graph generation (SGG), which aims to parse point cloud scenes into semantic structural graphs, where nodes denote detected object instances and edges encode their pairwise relationships, with the core challenge lying in modeling complex global scene structure. While existing graph convolutional network (GCN)-based methods suffer from over-smoothing and limited receptive fields, SGFormer++ leverages Transformer layers as its backbone to enable global message passing. Specifically, we introduce two key components tailored for 3D SGG: (1) a Graph Embedding Layer++ that efficiently integrates edge-aware global context with linear computational complexity, and (2) a Semantic Injection Layer++ that enriches visual features with linguistic priors from large language models (LLMs) and vision-language models (VLMs), boosting semantic representation without introducing extra trainable parameters. To further address the practical challenge of incremental SGG (I-SGG), where new relationship categories arrive sequentially, we equip SGFormer++ with a novel Spatial-guided Feature Adapter, which calibrates predicate features using subject-object spatial geometry to counter scale variation, and a Cascaded Binary Prediction Head that mitigates catastrophic forgetting via task-incremental classifier expansion and logit distillation. Extensive experiments on the 3DSSG benchmark demonstrate that SGFormer++ achieves state-of-the-art performance in both standard and incremental settings: it yields a significant 4.49% absolute improvement in Predicate A@1 under the incremental setting. Code and data are available at: https://github.com/Andy20178/SGFormer.

Deep learning models achieve state-of-the-art image classification but face deployment challenges due to computational costs and energy demands. We propose a lightweight training strategy that adapts normalization layers of the model to the new domain and decouples feature extraction from classifier optimization, reducing overhead by precomputing features only once. A redesigned classifier head with margin-based weighted loss further minimizes ambiguity without end-to-end backpropagation. Evaluated across four CNN architectures (ResNet18, ResNet50, MobileNet, DenseNet121), three Transformer models (ViT, Swin and DeiT) and three medical datasets (Brain Cancer MRI, BreakHis and PatchCamelyon), our approach significantly reduces the required training time with only a marginal accuracy trade-off, often matching or surpassing baseline performance. This efficiency translates to reducing CO2 by orders of magnitude, offering a practical and environmentally sustainable solution for resource-constrained clinical or prototyping environments.

Recent image classification models must balance local feature modeling, cross-window interaction, and parameter efficiency. Many high-performing architectures rely on fully trainable token-mixers, which improve representation learning but increase parameter count, optimization complexity and computational cost. We propose a parameter-efficient image classification model called HiRo that integrates shifted-window partitioning with multi-directional hierarchical reservoir computing. Images are divided into non-overlapping patches (treated as tokens), linearly projected, normalized, and enriched with 2D sinusoidal positional encodings, then processed within local windows. Inside each window, tokens are scanned in four directions and passed through a two-stage slice-and-mix reservoir module. In the first stage, directional sequences are split into contiguous slices, each processed by its own fixed reservoir with a trainable closed-loop readout. The resulting slice outputs are summarized using the start, end, and mean representations, and then mixed by a second-stage fixed reservoir for each direction. The mixed slice representations are expanded back to the token level and fused with the first-stage outputs, after which the four directional outputs are realigned and averaged. Consecutive blocks alternate between regular and shifted windows to enable cross-window interaction, followed by layer normalization, a residual feed-forward network, and global pooling for classification. This design combines regular and shifted window partitioning with hierarchical multi-directional reservoirs to make an efficient local-to-cross-window token-mixing framework for image classification. Despite using under 1M trainable parameters and significantly lower memory and time than transformer-style baselines, HiRo also achieves 99.46%, 85.57%, and 59.10% accuracy on MNIST, CIFAR-10, and CIFAR-100, respectively.

In computer vision, the basic pipeline of most convolutional neural networks consists of multiple feature extraction layers, where the input signal is downsampled to a lower resolution in each subsequent layer. This downsampling process is commonly referred to as pooling, which is an essential operation in CNNs. Pooling improves robustness against transformations, reduces the number of trainable parameters, increases the receptive field, and lowers computation time. Since pooling is a lossy process but remains important for extracting high-level information from low-level representations, it is important to preserve the most prominent information from previous activations to improve network discriminability. Standard pooling is usually performed using dense pooling methods, such as max pooling or average pooling, or through strided convolutional kernels. In this paper, we propose a simple yet effective adaptive pooling method, called FlexPooling, which generalizes average pooling by learning a weighted average over activations jointly with the rest of the network. We further show that attaching Simple Auxiliary Classifiers (SAC) to the CNN improves performance and demonstrates the effectiveness of the proposed method compared with standard pooling methods. Experiments on multiple popular image classification datasets show that FlexPooling consistently outperforms baseline networks, achieving approximately 1 to 3 percent improvement in accuracy.

Adversarial Training (AT) improves neural network robustness, but most methods train a fixed parameter space from the start. This paper asks whether the order in which parameters become optimizable can affect the final robust solution, even when the final architecture or computation budget is controlled. We propose GRAPE, Guided Parameter-Space Evolution, a training framework for compact adversarial robustness. GRAPE combines parameter-space stabilization with progressive hidden expansion: it stabilizes robust optimization in the currently exposed space, gradually releases new optimizable dimensions, and uses an adversarial spectral utilization score to guide newly released capacity toward high-pressure modules. In contrast to fixed-structure AT, GRAPE treats robust model learning as a process of progressive parameter-space exposure and evolution. Under the standard $\ell_\infty$ threat model on CIFAR-10, with fixed-structure ResNet-18 AT as a controlled reference, GRAPE improves PGD-20 robust accuracy from 51.70% to 56.94% at a nearly matched computation budget with a FLOPs ratio of 1.009x, while reducing parameter count by about 21.4%. A sequential grow variant with the same final ResNet-18 architecture reaches 56.52% PGD-20 robust accuracy, indicating that the gain is not only due to final architecture differences but also to the parameter-space exposure path. These results suggest that guided parameter-space evolution can yield compact and robust parameter configurations under matched computation.

Event-based saliency prediction has gained attention recently, as combining event cameras with saliency estimation can act as an upstream stage that naturally improves the efficiency of downstream eventbased perception at the edge. However, current approaches are either neuromorphic, underperforming on event-based saliency benchmarks, or too heavy for resource-constrained edge applications due to their reliance on transformers or 3D convolutions. Drawing inspiration from efficient convolutional modules, SED and aiming to exploit the temporal information in event data, we propose a lightweight network, trained through knowledge distillation, built on a Depthwise Spatio-Temporal Block (DSTconv) -- a factorization of the 3D depthwise separable convolution. Relative to its teacher, our model reduces the model size from 180 MB to 0.32 MB (562x) and the parameter count from 45M to 81k (554x), while matching or outperforming it on the N-DHF1K and N-UCF Sports datasets. Moreover, it generalizes strongly beyond its training distribution, transferring from synthetic to real event data where a model trained from scratch fails.

Modern image classifiers widely adopt global average pooling (GAP) followed by a linear classification head. This linearity ensures that the image-level logits equal the average of logits obtained by applying the classification head pointwise to the feature grid prior to GAP. Consequently, standard classifiers may inherently retain spatial class evidence that remains recoverable even when the image-level prediction is incorrect. This structure naturally suggests a multiple-instance learning (MIL) interpretation, where an image is viewed as a bag of spatial instances. Within this formulation, we demonstrate that standard classifiers trained with a single label per image can still learn the intended classification task in multi-object scenes. We further exploit this property to decompose image-level logits into a prediction grid, providing a post-hoc diagnostic to extract spatial class evidence that GAP otherwise obscures. Our systematic evaluation reveals that off-the-shelf models consistently recover the ground-truth class within foreground regions. The MIL interpretation further suggests that common classifier failures reflect known limitations of mean aggregation.

Unstructured pruning produces sparse weight tensors, but the standard implementation keeps tensor shapes unchanged so the deployed model is no smaller than before pruning. We present an exact structural rewrite, which we call minimization, that converts a masked network into a smaller dense network with the same forward function up to floating-point rounding. The Squeeze-Release cycle iterates pruning and minimization with an intermediate release step that re-enables the exact-zero positions inside the compacted tensors as small calibrated noise, turning otherwise wasted capacity back into trainable parameters. Successive cycles use that capacity to find structural redundancy a single pass cannot reach. We additionally introduce CompensatedLayerNorm, a function-preserving replacement for LayerNorm that extends minimization to channel reduction across LayerNorm-equipped residual streams. Squeeze-Release compresses the deployable network to 39x smaller than the unpruned model on a fully-connected model network and 14.8x smaller on modern CNN (ConvNeXt-Tiny), at comparable accuracy. In addition we prove that the rewrite can be extended to transformer architectures.

Partial-to-full registration remains challenging due to varying overlap ratios, fluctuating point densities, and the presence of noise. While transformers have shown strong potential for point cloud processing, prior methods typically confine them to global context aggregation, overlooking fine-grained local geometry crucial for accurate correspondence. We propose \emph{GAPR-Net}, a learning-based point cloud registration framework with a coarse-to-fine architecture that combines convolution and transformer modules, in which local and global information is fused between the partial and full point clouds using a cross-attention mechanism. To achieve this, a transformation-invariant point-wise geometric feature representation is proposed, which can robustly capture relative geometric features for individual points with respect to their neighboring points. To evaluate the effectiveness of the proposed approach, experiments are conducted on four geometrically distinct bones, including the tibia, femur, pelvis, and thoracic cartilage. The overall registration recall reaches 94.2%, the method results in a low RMSE of 1.992 mm and $R^2$ values of 0.908 and 0.974 for rotation and translation, respectively. The results demonstrate that the proposed method effectively addresses the partial-to-full point cloud registration problem. The proposed method enables highly accurate 3D point cloud registration using partial observation, providing a critical foundation for precise surgical navigation and robotic interventions in computer-assisted surgery. The code will be accessed after the double-blind review process.

Melanoma is the most dangerous form of skin cancer with five-year survival rates exceeding 99% when detected early but falling sharply once the disease spreads. This paper proposes and evaluates a two-stage fine-tuning approach for ResNet50 applied to binary melanoma classification on dermoscopic images. The core challenges addressed are class imbalance and suboptimal transfer learning from single-stage fine-tuning. After stratified train/validation/test splitting, random oversampling was applied exclusively to the training set to achieve a 1:1 class balance. Stage 1 trained only the classification head with the ResNet50 base frozen, while Stage 2 fine-tuned all layers jointly at a low learning rate of 1e-5 to prevent catastrophic forgetting of learned visual features. On an independent test set of 3,826 images, the model achieved an AUC-ROC of 0.9559, accuracy of 88.34%, sensitivity of 87.56%, specificity of 89.13%, and F1-score of 88.29%. An ablation study confirms the two-stage protocol significantly outperforms single-stage fine-tuning, with sensitivity gains of over 4%. Grad-CAM visualizations demonstrate correct lesion localization. A fully deployable Streamlit detection application is provided alongside all training code.

Personalized federated learning (PFL) is one of the important approaches in federated learning for addressing statistical heterogeneity while enabling client-specific adaptation. Many PFL methods split the model into shared and personalized parameters, which are jointly trained on each client. However, this creates an optimization issue: shared parameters are updated by clients optimizing different local objectives, which can lead to inconsistent shared updates and weaken the shared representation. To address this problem, we propose Federated Shared Parameter Correction (FedSPC), a modular correction method for PFL. FedSPC applies control-variate correction only to the shared parameters of a given PFL method, while leaving personalized parameters unchanged. It can be integrated into three common PFL settings: shared feature extractors, shared classifiers, and fully shared models with local regularization. Experiments on CIFAR-100 and Tiny-ImageNet with ViT, ResNet-34, and VGG-11 show that FedSPC improves performance across representative PFL methods, including FedPer, FedRep, FedBABU, LG-FedAvg, and Ditto.

Diffusion models have emerged as state-of-the-art generative models for high-fidelity image synthesis, particularly in their classifier-free guided and classifier-guided forms. However, standard classifier guidance concentrates probability mass around high-density class mean, leading to poor coverage of rare samples in the tails of the class-conditional distributions. Recent work on diffusion-based tail sampling mitigates this by training an additional low-density-seeking classifier with a synthetic-vs-real discriminator, at the cost of additional networks and training. In parallel, a number of samplers and distillation techniques accelerate or refine diffusion sampling, but do not explicitly address long-tail coverage. We propose a purely sampling-time, density-aware extension of classifier-guided conditional diffusion model that targets low-density regions without any additional training. We have applied guidance at noisy images not on predicted noise like most diffusion models. Starting from a pretrained conditional diffusion model and classifier on ImageNet, we modify the guided reverse dynamics by steering trajectories toward low-confidence regions via the modified classifier gradient, and at each time step, we also guide the sampling process toward the predicted real image. 1st guidance helps explore low-probability samples, and 2nd guidance helps to generate samples to be close to the real data manifold. The proposed sampler consistently improves ADM model recall at 64x64 resolution while maintaining a comparable FID, and with a 256x256 ADM model, we showed the results visually with different combinations of both guidance. We also showed that standard ADM classifier guidance, combined with predicted real image guidance, helps generate high perceptual quality samples with a 256x256 ADM model on ImageNet.

Fine-grained understanding of operating room (OR) activity could enable workflow-aware assistance, yet remains difficult due to clutter, occlusions, and limited sensing. The prevailing approach to model this environment is scene graphs as an interpretable representation of OR interactions. Converting their frame-wise relational predictions into temporally extended, fine-grained actions however, is challenging without explicit temporal modeling. To enable a principled temporal evaluation of current OR understanding methods, we introduce the first action-centric benchmark built on a publicly available ego-exocentric OR dataset by defining a fine-grained, multi-role action taxonomy and generating dense action segments via distillation from ground-truth scene graph state changes. Experiments on this benchmark show that current scene graph prediction methods struggle to model temporal structure, even when adding explicit modeling through Graph Neural Networks. We therefore introduce a vision-only temporal model that outperforms graph-based methods significantly when using all available egocentric video as input. Building on this model we also introduce a novel multi- to single-view feature alignment strategy that improves single-view performance on multi-role action recognition, mitigating the need for extensive egocentric video capture. Benchmark and code will be released upon acceptance.

While researchers continue to find new and improved network structures for CNNs, most of the newly invented architectures still rely on the traditional pattern of stacking convolutional blocks and separating them with pointwise activation functions. However, there are drawbacks to a network purely building on pointwise nonlinearities. One alternative is to introduce a pairwise connection between two filters of a network. Typical connection functions use multiplications or the minimum operation to realize logical AND connections. In this paper, we go one step further by demonstrating that CNNs can benefit from more general connections, which include parameters that are learned. With such parameters, the network is able to implement different connections in different network layers and better adapt the connection function to the task at hand.

Spatio-Temporal forecasting is crucial in diverse fields, such as transportation, climate, and energy. Urban spatio-temporal data exhibits temporal mirage: similar short-window inputs have divergent future trends, and vice versa. Existing spatio-temporal graph neural networks (STGNNs) cannot effectively identify such mirages. We argue that the core reason lies in the short-window inputs that have incomplete period observation, heterogeneous global spatial correlation, and cross-period superposition causality. To bridge this gap, we develop a novel Multi- Period Pattern Pre-training (MP3), a plug-and-play pre-training plugin for distinguishing temporal mirages. MP3 presents two core innovations: (1) The multi-period pattern learning is designed to learn multi-period patterns from long time series. Specifically, multi-period temporal modeling leverages edge convolution to identify different multi-period patterns. Multi-period spatial modeling uses a bottleneck project and a global memory bank to capture heterogeneous global spatial relations efficiently. Cross-period pattern interaction employs a causality-enhanced Transformer to capture dependencies across different period patterns. (2) This plugin can seamlessly integrate into existing STGNN backbones to strengthen their forecasting performance. The experiment on five STGNN baselines across five real-world datasets (including a large-scale dataset CA) verify the effectiveness, superior scalability and strong adaptability of MP3, which brings consistent and robust performance improvements across all evaluated baselines. On average, MP3 reduces the MAE 4.7% and the RMSE 5.0%. The code can be available at https://github.com/YAN-outlook/MP3.

Emotion significantly influences cognition, enhancing memory and learning under certain conditions. Drawing on this principle, emotion-augmented deep learning investigates how affective states can improve neural network architectures and learning paradigms, achieving better generalization than non-emotional models. However, existing methods often rely solely on objective neurophysiological factors, neglecting the role of subjectivity in emotion. To bridge this gap, the present study introduces Emotional Regulation, a novel framework for modeling emotion in deep learning through artificial subjective experience. The method employs pre-training based on affective stimuli, balancing non-emotional and emotionally-influenced responses in downstream task optimization. Extensive experimentation was conducted in image classification, pre-training ResNet and ViT architectures on four emotional datasets, using CIFAR-10 and -100 as target benchmarks. Results reveal improvements over the aforementioned backbones, providing evidence of Emotional Regulation as a promising method for defining emotion-augmented deep learning through artificial subjective experience. Furthermore, the proposed approach overcomes the related work in image classification based on CIFAR, revealing Emotional Regulation as the new state-of-the-art in emotion-augmented deep learning for large-scale vision datasets. The study also enforces evidence of the impact of affective states in improving machine learning tasks' optimization, encouraging further investigation on emotion-inspired architectures.

In intelligent video surveillance, cameras record image sequences during day and night. Commonly, this demands different sensors. To achieve a better performance it is not unusual to combine them. We focus on the case that a long-wave infrared camera records continuously and in addition to this, another camera records in the visible spectral range during daytime and an intelligent algorithm supervises the picked up imagery. More accurate, our task is multispectral CNN-based object detection. At first glance, images originating from the visible spectral range differ between thermal infrared ones in the presence of color and distinct texture information on the one hand and in not containing information about thermal radiation that emits from objects on the other hand. Although color can provide valuable information for classification tasks, effects such as varying illumination and specialties of different sensors still represent significant problems. Anyway, obtaining sufficient and practical thermal infrared datasets for training a deep neural network poses still a challenge. That is the reason why training with the help of data from the visible spectral range could be advantageous, particularly if the data, which has to be evaluated contains both visible and infrared data. However, there is no clear evidence of how strongly variations in thermal radiation, shape, or color information influence classification accuracy. To gain deeper insight into how Convolutional Neural Networks make decisions and what they learn from different sensor input data, we investigate the suitability and robustness of different augmentation techniques...

The rapid growth of modern training datasets has significantly increased computational cost, motivating dataset pruning~(DP) methods which retain only a subset of informative samples to reduce training cost. Existing pruning criteria typically rely on either intrinsic signals that assess samples independently or extrinsic signals that promote diversity via pairwise relations. While effective in their own specific regimes, each captures only one aspect of sample utility and lacks robustness across different pruning ratios or data distribution. In this work, we present a unified graph-based DP framework. By modeling the dataset as a weighted graph, where node weights encode intrinsic value and edge weights encode extrinsic value, DP can be cast as a Maximum Weight Clique Problem (MWCP). Although MWCP is NP-hard, its structure admits a principled greedy solution based on sample-wise marginal gains. Under a few mild conditions, we further prove that this unified objective enjoys a formal approximation guarantee, which applies to a broad family of importance metrics and provides practical design guidelines. Extensive experiments show that our method outperforms existing DP methods while substantially reducing training cost, reducing training time by over 40% without sacrificing accuracy on ImageNet-1k with ResNet-50.

In image and surface-based learning tasks, convolutional features are typically extracted using receptive fields that are sampled uniformly across the entire domain. However, informative structures are rarely distributed uniformly in practice and are often concentrated in localized regions. Such phenomena are particularly common in medical imaging, where pathological changes are spatially confined. Consequently, uniform convolution allocates equal computational effort to both informative and uninformative regions, resulting in inefficient feature extraction and suboptimal utilization of model capacity. To address this issue, we propose a framework for task-adaptive sampling that dynamically redistributes computational attention according to the spatial importance of the data. Specifically, we introduce the Density-Equalizing Convolutional Neural Network (DECNN), which employs density-equalizing mappings to guide convolution through a learned density function. The density function encodes the relative importance of different regions and induces a transformation that enlarges informative areas while compressing less relevant ones. As a result, convolutional receptive fields are redistributed non-uniformly over the domain, enabling denser sampling in task-relevant regions. By coupling this importance-driven transformation with convolution, DECNN performs adaptive feature extraction that focuses computational resources on informative structures. This leads to more efficient use of model capacity, yielding a lightweight yet expressive architecture while simultaneously producing an interpretable saliency map. Experiments on image classification and craniofacial surface analysis demonstrate that DECNN achieves competitive or superior performance with fewer parameters, accurately identifies task-relevant regions, and remains robust under complex geometric variations.

Diffusion models have become essential for high-fidelity 3D MRI synthesis, yet their deployment remains constrained by substantial GPU resource demands arising from hundreds of U-Net evaluations per sample and a highly heterogeneous kernel behavior. This paper performs a comprehensive performance analysis of the state-of-the-art medical diffusion model, Med-DDPM, across three generations of NVIDIA architectures to study kernel-level runtime breakdowns, instruction-mix characteristics, memory system utilization, warp-level activities, and profiler priority-score estimates. We show that training is overwhelmingly dominated by cuDNN convolution and implicit-GEMM kernels, with inefficiencies arising from memory-access patterns, tensor-layout conversions, and limited Tensor Core utilization. Guided by these insights, we evaluate two architecture-aware optimizations TF32 Tensor Core activation and a 3D channels-last layout and demonstrate that they reduce SM cycles by up to 100x, cut dynamic instructions by 100x, raise Tensor Core utilization from 1.45 to 9.98x, and increase IPC by 7% on A100, all without degrading synthesis quality.

Precision agriculture requires the estimation of plant growth stages in real-time. When the plant growth stage is known, the wastage of resources in cultivation, such as nutrients and water, is reduced as only the required resources need to be supplied. Plants at different growth stages, however, have similar morphological features, which can make autonomous growth stage estimation difficult. This paper presents two feature extraction methods for growth stage estimation: one that uses a bank of Gabor filters and morphological operations, and the other that uses pre-trained convolutional neural networks (CNNs) and transfer learning. We test these methods on a publicly available plant growth stage dataset (bccr-segset) for two species, canola and radish, grown and captured under indoor conditions. The two proposed feature extraction methods are compared, using support vector machines and boosted trees as classifiers. We find that both methods are suitable for real-time applications, and that CNN features outperform the hand-crafted features, both with regard to speed and accuracy. The best system (VGG-19 features, classified with a radial basis function support vector machine) obtained an accuracy of 98.4% for both species, processing an image in 0.08 seconds.

This paper presents ERN-Net, an Evolving Reason Node-Net for efficient document image binarization. ERN-Net enhances degradation-sensitive regions, such as faint strokes, broken characters, and noisy backgrounds, through evolving reason nodes and multi-scale reasoning. We further compare ResNet-101, ConvNeXt-Tiny, and ConvNeXt-Base, and find that ConvNeXt-Tiny provides the best practical trade-off between accuracy and memory usage. In addition, DIBCO-based pretraining improves binarization performance without increasing model memory consumption, requiring only about 1.5 additional training hours. Experiments on DIBCO-style benchmarks show that ERN-Net is effective under low-data and low-memory settings.

The Euler Characteristic Curve (ECC) records the Euler characteristic of a linearly embedded cell complex as a function of filtration height in a given direction, and the Euler Characteristic Transform (ECT) is the injective shape descriptor obtained by collecting ECCs over many directions. How the ECT is encoded for a neural network is itself an inductive bias, conventionally fixed by discretizing each ECC. We introduce a continuous encoding: for each direction and each vertex it records the net Euler-characteristic change attributed to that vertex, producing a per-direction token sequence that a small transformer maps to a feature vector. We separate the resulting pipeline into two stages on orthogonal axes: an ECC encoder that acts within each direction, mapping its curve to a fixed-length vector, and an ECT representation that acts across directions, aggregating the per-direction vectors into one. We study six ECT representation architectures spanning a range of inductive biases, from a structure-agnostic feedforward baseline to convolutional and complex-valued models that preserve equivariance under planar rotations. Across six classification benchmarks covering point clouds, graphs, cubical complexes, and meshes, the continuous encoding improves accuracy on five of six datasets, and control experiments attribute the gain to the tokenization itself rather than to the added transformer capacity. The representation architecture matters less than the encoding, and the payoff from its inductive biases depends on the encoding: a feedforward network performs best under continuous encoding but is less robust under discretization than convolutional architectures.

Zero-shot learning (ZSL) for inertial measurement unit (IMU)-based human activity recognition (HAR) faces a central challenge: bridging the gap between sensor embeddings and semantic class representations. We systematically evaluate seven configurations combining three inference methods with two training pipelines on the PAMAP2 dataset, using 14 seen and 4 unseen activity classes with subjects 108 and 109 held out for testing. We find that the modality gap is a training-time phenomenon governed by the encoder objective. A temporal convolutional network (TCN) trained with cross-entropy over label-name Sentence- BERT prototypes yields sensor embeddings with a mean cosine similarity of 0.30 to the corresponding text prototypes, while replacing the label-name prototype targets with discriminative activity descriptions raises this to 0.69. This alignment improvement transfers consistently across all three inference methods. The strongest result combines contrastive training with inverted softmax correction, achieving 73.2% accuracy and 0.583 macro F1 on unseen classes, compared to 58.3% accuracy and 0.34 macro F1 for the label-name baseline. A secondary finding is that richer text descriptions reduce inter-prototype separability in Sentence-BERT space, because shared biomechanical vocabulary causes the language model to compress the prototype cloud. This effect does not negate the benefits of contrastive alignment provided prototype descriptions retain sufficient discriminative vocabulary. We also demonstrate that overall accuracy is a misleading primary metric when test-set class distributions are imbalanced, and recommend macro-averaged F1 as the standard reporting metric for ZSL-HAR benchmarks.

Multi-task vehicle routing problems play a critical role in enhancing efficiency across various industries and service sectors. These problems consist of multiple variants that optimize routing costs while meeting diverse customer constraints. Existing multi-task VRP solvers solely utilize a graph-based modality, limiting their ability to address variants with multiple constraints. As a format to represent complex semantics, vision modality shows great potential for encoding diverse VRP constraints. This motivates us to learn patch-level semantics from the vision images, and then integrate them into a graph-based model to solve various VRP variants simultaneously. However, directly applying this approach to multi-task VRPs presents three challenges: 1) existing VRP images lack constraint representations, which are essential for multi-task VRPs, 2) the fixed receptive field of individual patches cannot effectively accommodate varying requirements across tasks, and 3) imbalanced pixel distribution among constraints may cause the model to overlook constraints with fewer pixels. In this paper, we propose a vision-assisted foundation model (VaFM) to address these challenges. In the vision modality, input images tailored to all constraints are encoded by a convolutional neural network. The obtained patch embeddings are fused with graph-based nodes to generate solutions, with an auxiliary task designed to address the pixel-imbalanced issue. The performance of VaFM is evaluated across 16 different VRP variants. The experimental results demonstrate the superiority of VaFM over state-of-the-art methods, especially for variants with complex constraints.

Pedestrian Attribute Recognition (PAR) is critical for video surveillance, enabling forensic search and re-identification systems. Extreme class imbalance remains a fundamental obstacle when merging PETA and PA-100K into a 109,000-image composite corpus, where minority attributes have positive sample fractions below 1%. This causes standard BCE optimization to suppress rare traits, a phenomenon we term the majority negative class cheating trap. We present a systematic ablation of Multi-Label Focal Loss hyperparameters (alpha and gamma) on a ResNet-18 backbone. A calibrated configuration (alpha=0.50, gamma=2.0) achieves a Macro F1-score of 62.32%, matching BCE baseline while preserving superior hard-example mining and convergence dynamics. Our approach uses pure loss-function engineering with zero computational overhead for edge deployment. We identify the Sparsity Wall, a hard boundary where positive sample fractions below 0.1% make global loss reweighting ineffective, requiring instance-level intervention.

As one of the most destructive natural disasters, earthquakes have struck many countries around the world in recent years, causing serious economic losses. Change detection (CD) can be applied to post-earthquake damage assessment as it can infer destroyed change regions from multi-temporal remote sensing images. Furthermore, the CD with short imaging interval will better satisfy the needs of the emergency rescues after earthquakes. However, the capability of current methods built on deep neural networks is limited because the dataset with short imaging interval is absent. To meet post-disaster immediate relief, we create a CD dataset, Turkey earthquake CD dataset (TUE-CD), for the evaluation of building damage in the short term after an earthquake. Because of the short acquisition interval of the post-event images, the imaging angle is different for different temporal images, which leads to some side-looking problems. To deal with these challenges, we present a multi-scale feature interaction network (MSI-Net) for efficient interaction between bi-temporal features, as well as mitigating the effect of side-looking problems. Specifically, the proposed MSI-Net consists of joint cross-attention (JCA) modules, multi-scale offset calibration (MOC) modules, and feature integration (FeI) modules. The JCA module unifies channel cross-attention and spatial joint attention for sufficient feature interaction. The MOC module further estimates the offsets to align the bi-temporal image with the multi-scale features. Finally, calibrated features and multi-scale features are fused by FeI modules for the prediction of changed areas. Experiments on the WHU-CD, CLCD, and the constructed TUE-CD dataset indicate that the proposed MSI-Net provides better results than considered state-of-the-art CD methods.

End-to-end co-optimization of optical front-ends (e.g. metasurfaces) and neural network back-ends has been widely applied to imaging tasks, yet a formalism characterizing when and why such systems outperform conventional lens-based imaging is largely lacking. This paper focuses on object classification, a central imaging task, and asks when end-to-end optimization of a phase mask for incoherent imaging improves performance over a conventional focusing lens. We find that these gains arise primarily under constrained detector readout and are limited under full detector readout. In the latter setting, we prove that no incoherent phase mask exceeds the ideal-channel mutual information between detector measurements and class labels; a conventional focusing lens approaches this ceiling, and joint optimization yields no empirical gain. When detector readout is constrained -- by coarse spatial sampling or a limited number of measurements -- optimized optics can substantially improve classification by increasing class separability in the detector measurements. These gains are largest under low detector noise and shrink as noise grows, because the optics shape the signal before it reaches the detector but cannot remove noise added afterward. The advantage also depends on the spectral structure of the task: co-design helps most when class-discriminative content is concentrated at lower spatial frequencies than within-class variation. We develop a theoretical framework formalizing these distinctions and test its predictions on synthetic data and standard benchmarks (MNIST, FashionMNIST, SVHN).

Muon has recently emerged as a state-of-the-art optimizer for pretraining Large Language Models (LLMs) and vision classifiers. Despite its efficiency advantage over Adam and SGD, the feature-learning advantage of Muon remains unclear. This paper investigates Muon's feature-learning advantage through the lens of robustness and transferability. First, by evaluating pretrained models on corrupted images and texts, we show that features learned by Muon are consistently more robust than those learned by Adam and SGD across different architectures, including transformers and Convolutional Neural Networks (CNNs). Using trained layer-wise probes, we further show that this robustness advantage is reflected in larger logit margins across layers. Second, by training linear classifiers or fine-tuning full models from pretrained parameters on downstream tasks, we demonstrate that Muon-learned features transfer more effectively than those learned by Adam and SGD. This transferability advantage is further supported by the diversity of hidden states across layers, as measured by effective rank. Finally, in a representative classification problem with multi-component features, we prove that Muon attains larger margins and higher effective rank than Adam and SGD, providing theoretical support for our empirical findings.

Though Vision Transformers (ViTs) have become the dominant backbone in many computer vision tasks, due to permutation equivariance, their attention mechanism lacks explicit spatial inductive biases. This become particularly important in two settings: when model capacity is small or training data is limited. Inspired by the attention masking strategies in Linear Transformers and the scanning patterns of Vision SSMs, we introduce VIOLIN, a lightweight masked attention mechanism that encodes spatial structure within attention via Space Filling Curves (SFCs) with less than 0.0015% extra parameters and negligible computational overhead. VIOLIN scans the image using multiple SFCs to construct curve-specific decay masks, which are then combined and multiplied with the attention matrix. Across a wide range of evaluations, VIOLIN consistently improves performance. In limited data regimes such as fine-tuning on VTAB-1K, it boosts accuracy across all task groups and by up to 8.7% on the tasks where spatial information is essential. It can be combined with parameter-efficient fine-tuning methods such as LoRA to further increase the performance. Beyond fine-tuning, VIOLIN improves various small scale ViT architectures (e.g., DeiT, DINO) during pretraining on ImageNet-1K. Additionally, on pixel-level CIFAR-100 training, a task that is highly dependent on location information, VIOLIN increases accuracy by up to 7.2%. Overall, VIOLIN provides a computationally efficient yet effective way to inject spatial inductive bias into ViTs, especially benefiting small models and limited data settings.

Convolutions have successfully transitioned from image processing to the complex realm of non-Euclidean higher-order domains, particularly in hypergraphs. Despite the success in convolution, the exploration of a popular architecture named U-Net remains largely unexplored for hypergraph data due to the lack of well-defined pooling and unpooling operations. This work pioneers the study of U-Net architectures for hypergraph data, addressing the critical challenge of designing effective pooling and unpooling operations that retain maximal structural information from the input hypergraph. Motivated by hierarchical clustering, we propose to construct the pooling and unpooling operators all at once by cutting the clustering dendrogram at different granularities, named the Parallel Hierarchical Pooling (PHPool) and Unpooling (PHUnpool) operators. Unlike existing pooling methods that risk local structural damage through a sequential learning procedure, our PHPool operators are designed in a global and parallel manner to ensure fidelity to the original hypergraph structure with efficient computation while the PHUnpool operators are tailored to perform inverse operations of the PHPools for hypergraph reconstruction. We validate our model through hypergraph reconstruction simulation, hypergraph classification, and node-level anomaly detection, where it demonstrates superior performance over existing state-of-the-art graph and hypergraph deep learning methods.

Extracting building polygon contours from high-resolution remote sensing images is a fundamental task for various mapping applications. However, the presence of varying imaging conditions and complex building structures, makes automatic contour extraction extremely challenging. Mainstream approaches for building extraction often rely on pixel-level segmentation followed by multiple post-processing steps to produce building contour, which can be computationally intensive and prone to errors. In this paper, we propose an end-to-end method named PolyBuild, which can directly extract building vector polygons from high-resolution remote sensing images without the need for any post-processing operations. The proposed method leverages two primary modules: an Initial Contour Generation Module (ICGM) and a Contour Optimization Module (COM). The ICGM is designed to generate an initial building contour by utilizing concatenated sub-region center features for each building instance. It performs simultaneous object detection and initial contour extraction by generating bounding boxes and using the center features of four sub-regions to represent each building. The Contour Optimization Module (COM) further refines the generated building contours by iteratively integrating Convolutional Neural Network (CNN) features and contour positional information in a Transformer-based decoder. The hybrid CNN-Transformer architecture effectively captures both local and global spatial relationships within the building contour, ensuring high-quality boundary delineation. Extensive experiments are conducted on three building datasets to evaluate the performance of PolyBuild. The results demonstrate that PolyBuild significantly outperforms state-of-the-art methods, including mask-based and contour-based approaches.

Image data regarding galactic morphology is expected to increase both in quantity and quality for the next foreseeable years; thus it is important to explore which deep learning architectures adapted for image classification tasks are cost-effective. Residual and Inception networks are ideal for exploring classification convolutional neural networks (CNNs) due to their computational efficiency, achieved through techniques such as residual connections and parallelized inception modules, enabling deeper networks without excessively increasing computational complexity. In this work, we analyze the performance of ResNet101 and InceptionV4 on a spatially-augmented Galaxy10 DECals dataset. Retaining the ten-class classification of galaxies, we modify the image count of each class. We find that ResNet101 and InceptionV4 models achieved accuracies of $\sim$ 90%, comparable with reported performance in the literature. In terms of performance metrics, ResNet101 is superior to InceptionV4. Our results indicate that either of these CNN architectures could serve as a robust foundation for specialized pipelines for classification of galaxy images from upcoming surveys.

The Forward-Forward (FF) algorithm offers a biologically inspired alternative to backpropagation by replacing gradient-based credit assignment with local, forward-only objectives. While recent extensions have adapted FF to convolutional neural networks (CNNs), existing formulations rely on static channel-class partitions and struggle to perform effectively in complex tasks. In this work, we introduce a learnable channel-class assignment mechanism that enables adaptive, data-driven specialization of convolutional channels, supported by entropy and orthogonality regularization to promote learning performance. We further propose a loss-aware layer contribution strategy that adaptively weights intermediate-layer predictions based on their validation performance, enhancing the effectiveness of forward-only inference. Integrated into residual CNNs, the proposed method achieves consistently superior performance across CIFAR-10, CIFAR-100, and Tiny-ImageNet compared to existing similar forward-only methods. Notably, it establishes new state-of-the-art performance among FF-based models, substantially narrowing the gap with backpropagation. These findings demonstrate that introducing learnable channel specialization and layer contribution weighting significantly enhances the representational capacity of forward-only learning in deep CNNs.

Self-supervised learning (SSL) has achieved remarkable representation learning performance, but many existing methods rely on large batch sizes, memory banks, momentum encoders, or global synchronization mechanisms that substantially increase computational cost and training complexity. In this work, we propose Semantic Mutual Information (SMI), a lightweight self-supervised objective derived from a mutual-information-inspired dependency formulation under Gaussian assumptions. Unlike conventional correlation matching objectives that operate on high-dimensional feature correlation matrices, SMI performs optimization on a sample-level dependency matrix through a nonlinear transformation of pairwise correlations. This formulation induces distinct optimization dynamics that emphasize strongly dependent semantic pairs while maintaining representation diversity. Experimental results on ImageNet using a ResNet-50 backbone demonstrate that SMI achieves competitive linear evaluation performance relative to state-of-the-art SSL approaches while substantially reducing computational complexity. Across multiple low-resource benchmarks, SMI consistently improves transfer performance over Barlow Twins, particularly on fine-grained datasets. Furthermore, analyses of optimization dynamics and representation geometry suggest improved alignment--redundancy balance, greater feature diversity, and more spatially localized semantic representations. These results indicate that nonlinear dependency optimization provides an effective and computationally efficient alternative to conventional correlation-based self-supervised learning objectives.

A new fractional ambiguity function (NFrAF) derived from the fractional Fourier transform is introduced as a generalization of the classical ambiguity function. The fundamental analytical properties of the NFrAF, including symmetry, marginality, and Moyal type identities, are rigorously established. After verifying its ability to detect and localize monocomponent and multicomponent linear frequency modulated (LFM) signals, the NFrAF is integrated into a convolutional neural network based machine learning framework for signal classification. Owing to its superior time frequency resolution and localization, the NFrAF provides a more informative input representation than conventional methods such as the spectrogram and classical ambiguity function. Experimental results on simulated datasets demonstrate consistent improvements in classification accuracy, highlighting the effectiveness of the proposed representation for data driven signal analysis.

Cracks are a critical indicator of building health, and early stage identification is fundamental to prevent harmful damages. Advances in deep learning (DL), particularly convolutional neural networks (CNNs), have enabled scalable solutions for automated crack detection. However, CNN performance strongly depends on the availability of large and diverse datasets, which is particularly challenging for complex surfaces such as masonry. Collecting sufficient real data is time-consuming, while publicly available datasets may not be adequate. To address this limitation, we explored generating synthetic crack data, which complements real data and improves training effectiveness. The real dataset consists of masonry crack images collected from buildings in Bologna and surrounding areas. In contrast, the synthetic dataset was generated using a crack overlay tool that adds cracks to background images in a controlled orientation and placement. The real dataset was used to train several DL architectures, to identify the best-performing model (InceptionV4) employed for experiments with generated data. Six training scenarios were tested in InceptionV4 by varying the ratio of real and synthetic data, with evaluation performed on a test set composed of real images using the F1-score and mean Intersection over Union (mIoU) metrics. Results show that training on synthetic data plus a modest addition of 20% real data achieves results comparable to training on real data only. Moreover, the 20/80 scenario (synthetic/real) achieved an 76% F1-score and 80% mean IoU, outperforming the real-only case. As can be seen, the method demonstrates the potential of synthetic data to reduce collection efforts while enhancing crack detection accuracy.

Standard diffusion models corrupt an entire sample with a single shared noise level, forcing all spatial regions to follow the same denoising trajectory. We introduce AsyncPatch Diffusion, a joint-diffusion framework that assigns distinct noise levels to different input dimensions, such as image pixels, or latent tokens. We show how this asynchronous corruption defines a valid generative process while supporting a richer family of spatially heterogeneous denoising trajectories, and prove the first valid ELBO for this process. We show that a single pretrained model can perform spatially adaptive generation, where different regions are denoised on different schedules. A key challenge is training: naive independent noise-level sampling overemphasizes highly heterogeneous configurations and underrepresents homogeneous noise levels, that are crucial during sampling. We address this with a controlled noise-level sampler that regulates both the average corruption level and its spatial variability. AsyncPatch achieves generation quality comparable to conventional diffusion on ImageNet 256 and LSUN, while being natively suited for inpainting without task-specific fine-tuning. We further introduce input guidance, which uses clean or partially corrupted regions to guide the generation of unknown regions, improving local consistency and texture matching. Finally, we demonstrate adaptive generation strategies including uncertainty-guided acceleration and autoregressive sampling.

Three-dimensional models are widely assumed preferable for volumetric medical imaging, yet their practical value depends on whether performance gains justify added computational cost and complexity. Rather than proposing a new architecture, we study how input dimensionality (2D, 2.5D, 3D) affects model behavior across convolutional neural networks (CNNs) and Vision Transformers (ViTs) under a fixed training protocol. Using a leakage-free NLST cohort (n = 1,977) with supporting LIDC-IDRI data, we find that the 2.5D CNN offers the most favorable discrimination-stability trade-off in our comparison (ROC-AUC 0.682, 95% CI [0.546, 0.799]) with a stable operating point. In contrast, 3D CNNs show threshold instability, and transformers exhibit degenerate predictions, such as all-positive predictions. Confidence intervals are wide and overlapping, so we present these results as a controlled resource-performance frontier and a failure-mode taxonomy rather than as definitive superiority claims. For class-imbalanced lung cancer screening classification, 2D and 2.5D inputs provide a more reliable trade-off between performance, stability, and computational efficiency than full 3D representations.

Multiple instance learning (MIL) has become a standard paradigm for whole slide image (WSI) analysis in digital pathology, as it enables slide-level prediction without dense annotations. Existing MIL methods typically rely on exhaustive extraction and encoding of high-resolution patches. However, this practice suffers from two critical limitations in real-world clinical settings: it struggles to capture global visual cues at lower magnifications, and incurs substantial computational overhead due to the massive number of high-resolution patches per slide. To address these limitations, we propose an efficient low-resolution multiple instance learning (LRMIL) framework that transfers high-resolution knowledge to low-resolution representations. LRMIL adopts a two-stage distillation strategy. First, patch-level cross-resolution distillation aligns low-resolution patch embeddings with high-resolution representations. Second, slide-level knowledge distillation trains a low-resolution student MIL model under both slide-level supervision and teacher guidance. At inference time, LRMIL operates exclusively on low-resolution patches, substantially reducing data preprocessing and computational cost. Extensive experiments on multiple WSI benchmarks demonstrate that LRMIL consistently outperforms state-of-the-art MIL methods while achieving more efficient inference. These results highlight LRMIL as a practical and scalable solution for WSI analysis in clinical pathology.

Digital twins (DTs) allow the digitalization of road infrastructure inspection, though this is hindered by limited annotated data. This work exploits the relational nature of continuous asset condition monitoring to reformulate image-based defect detection as image difference classification (IDC) to reduce data reliance. This was evaluated in a case study on low-resource traffic sign inspection with different IDC classifiers using a newly-curated, high quality dataset. Results indicate that the instruction-based classifier outperforms encoder-based ones and gains from comparison with reference images. This shows that IDC can be an effective task modeling for tackling data constraints in infrastructure inspection and DT asset condition updating.

In this study, UAV multispectral imagery is used to segment the severity of bacterial leaf blight (BLB) in rice using convolutional neural networks (CNNs) and transformer-based models. The evaluated architectures include U-Net with a ResNet- 101 encoder, U-Net++ with EfficientNet-B3 and EfficientNetB7, DeepLabV3+, and SegFormer, all trained under a common pipeline with three input configurations (multispectral only, multispectral+NDVI, and multispectral+NDRE). Experiments are conducted using the publicly available BLB dataset with performance reported using mean IoU (mIoU), mean F1 (mF1), mean accuracy (mAcc), precision, and recall. U-Net++ with EfficientNet-B3 achieved the highest performance, with an mIoU of 97.62%. SegFormer obtained lower segmentation accuracy but comparable inference speed. Overall, the results indicate that lightweight CNN backbones remain more reliable for operational BLB monitoring while integration of vegetation indices provides small and consistent improvements. The study also highlights the value of standardised UAV datasets to compare disease mapping methods and encourages the use of CNN architectures for field implementation.

Forward-Forward (FF) learning [Hinton, 2022] replaces backpropagation with strictly layer-local goodness updates. Recent FF-CNN work has narrowed the gap to BP on 32x32 benchmarks, raising the question of whether layer-local training is becoming a viable alternative at realistic scale. To probe this rigorously, we develop DTG-FF -- dynamic temperature goodness, decoupled normalization, and multi-layer fusion -- as an instrument that sets FF-family state of the art across nine real-data benchmarks (91.8% CIFAR-10 and the first FF baseline at ImageNet-100 224x224), and use it to audit how far layer-local training actually scales. (1) Real-data scaling. Under identical recipe and backbone, an architecture-matched BP-DeepSup baseline beats DTG-FF by 2.40/5.93 pp on CIFAR-10/CIFAR-100, and the gap widens with class count. At 224x224 the same instrument reaches only 49.4% -- the first FF baseline at this scale, versus typical BP above 75% [Tian et al., 2020] -- exposing a real-data ceiling invisible at 32x32. (2) Synthetic vs. real K-conflict. DTG-FF increasingly outperforms BP as class count K grows on synthetic teacher-student tasks, yet on real images the FF-BP gap reverses sign and widens with K. A within-dataset CIFAR-100 coarse vs. fine probe isolates label-hierarchy from image distribution: synthetic K-sweeps confound output dimensionality with fine-grained discrimination difficulty and thereby overstate FF transferability. (3) Systems audit. FF can be implemented without storing depth-wide activations, but on commodity 8 GB hardware standard BP+gradient-accumulation reaches 4.18 GB / 157 imgs/s versus DTG-FF's 7.90 GB / 138 imgs/s, so a memory-based justification for FF at this scale is not supported under fair baselines.

Sow body condition is an important indicator for growers as it has a large impact on lactation performance and piglet survival. However, body condition measures used during production, such as visual scoring and calipers, correlate poorly with underlying tissue composition. Ultrasound scans can provide direct measurements of subcutaneous backfat thickness and loin muscle depth, but their operation is labor intensive and not scalable for production. We present PigFormer, an end-to-end two-stage system that takes raw depth frames from a ceiling-mounted RGB-D camera and predicts subcutaneous backfat thickness, loin muscle depth, and total tissue thickness at the last rib. Stage 1 is a geometric front-end that converts raw depth into a standardized height map via SAM3-to-MaskDINO segmentation distillation, ground-plane removal, and orientation normalization. Stage 2 is a Slice Attention Encoder that treats each height map as a sequence of cross-sectional slices and captures spatial relationships along the full dorsal surface. On a multi-site dataset of 319 sow and gilt instances from two facilities, PigFormer achieves 2.43 mm backfat MAE and 3.87 mm overall MAE. It outperforms strong single-stage ResNet-18 and ViT-small baselines. PigFormer offers a practical path toward continuous, automated, non-contact body condition monitoring in commercial swine production. Code is available at https://github.com/iambashar/Pigformer.

This work introduces a hybrid deep learning approach integrated with an Unscented Kalman Filter (UKF) to enhance pose estimation accuracy in Visual-Inertial Odometry (VIO) for autonomous navigation. The proposed model employs a Vision Transformer (ViT) network to effectively capture temporal dependencies from inertial measurement unit (IMU) data and utilizes a Multiscale Convolutional Neural Network (MCNN) to learn optical flow-based motion cues from visual data. An adaptive sensor fusion module dynamically weights IMU and visual features by leveraging estimated uncertainty, thus improving robustness in diverse and challenging environmental conditions. Additionally, a novel uncertainty-aware loss function is proposed to explicitly incorporate prediction uncertainty into the learning process, enabling robust and accurate navigation under noisy, incomplete, or unreliable sensor inputs. Comprehensive evaluations of the KITTI dataset demonstrate that the proposed method significantly outperforms baseline approaches, achieving superior performance in terms of Absolute Trajectory Error (ATE) and Relative Pose Error (RPE). The lightweight and computationally efficient model processes data at 155 FPS on an NVIDIA A100 GPU, making it highly suitable for deployment in resource-constrained autonomous systems.

Reliable neural architecture selection is an open challenge in time-series forecasting under limited, noisy, and heterogeneous data, where standard heuristic architecture design and validation approaches fail to ensure accurate and reliable prediction and generalization. We propose EVIDENT (EVidence-based IDEntification of Neural archiTectures), a framework for architecture selection that integrates Bayesian training, evidence-based ranking, and task-specific validation under uncertainty. The framework explores the candidate architecture pool and identifies the lowest-capacity model that satisfies a prescribed validation criterion. We demonstrate this method using temporal convolutional networks (TCNs) for individualized blood glucose forecasting in type 1 diabetes patients. The results show that EVIDENT systematically rejects both under- and over-parameterized TCN architectures on population-level diabetes data, while identifying models that generalize reliably to unseen patients. When multiple architectures are competitive, the framework further supports plausibility-weighted ensemble predictions that enhance predictive performance. Compared with a random-search baseline, EVIDENT identified smaller architectures with more consistent forecasting performance on unseen patients. These findings establish EVIDENT as a strategy to neural architecture discovery, enabling reliable model selection for high-consequence forecasting in data-limited and heterogeneous settings.

Generating realistic financial time series is challenging as training data is often limited to a single historical path. With such scarce data, overfitting is hard to avoid, especially under adversarial training where a trained discriminator can memorize the training samples. To mitigate this, recent approaches train generators to minimize the discrepancy between untrained feature representations of real and generated time series. In these works, the feature maps are based on path signatures, which can fail to capture relevant time series properties at tractable truncation depths. In this work, we instead train generators by matching random convolutional features of real and generated time series. Existing random convolutional feature maps, such as Rocket and Hydra, have been shown to provide informative representations of real-world time series, but cannot supervise generative models because they are non-differentiable. We introduce SOCK (SOft Competing Kernels), a fully differentiable random convolutional feature map, suited to train generative time series models. We show that generators trained by matching random SOCK features consistently outperform signature and diffusion baselines across a wide range of small-sample financial datasets. We further demonstrate SOCK's expressiveness on two-sample hypothesis testing and time series classification tasks, where SOCK matches or outperforms existing unsupervised feature maps.

Few-shot class-incremental learning (FSCIL) in synthetic aperture radar imagery presents unique challenges due to severe data scarcity and SAR-specific variability. In particular, strong azimuth sensitivity in SAR induces large intra-class variation and inter-class confusion, and FSCIL sequential updates further lead to catastrophic forgetting of previously learned classes. Inspired by neural collapse, we propose an optical-guided SAR FSCIL framework, which derives orthogonal feature subspaces from a data-rich optical ATR dataset and uses them as geometric priors to guide SAR feature learning. SAR features are projected onto these orthogonal subspaces via principal angle constraints, effectively transferring discriminative structure from the optical to the SAR domain. Specifically, our projection loss and the classifier loss optimized with a frozen simplex-ETF geometry jointly induce neural collapse by concentrating features around class means while maintaining large inter-class angles. We evaluate the approach on a benchmark comprising an optical ATR dataset and a SAR ATR dataset with 24 target classes, organized into a base training session and seven incremental sessions. Compared with recent FSCIL methods including NCFSCIL and so on, our method achieves the highest final accuracy and a favorable trade-off between final performance and performance degradation. Moreover, neural collapse metrics show improved intra-class compactness and inter-class separability, indicating that the learned features more closely approximate the ideal simplex-ETF geometry.

Leading flexible vision tokenizers achieve SOTA quality at an extreme cost, relying on parameter-heavy backbones and slow, multi-step generative decoders. We depart from this complex, spatial-token paradigm and introduce a simple, lightweight, and fast channel-wise flexible-length tokenizer. Our method treats each latent channel as a visual token, enabling a parameter-efficient CNN-Transformer hybrid backbone. Furthermore, employing a stochastic tail-dropping paradigm during training naturally forces channels to organize by semantic importance. This allows for flexible compression at inference by simply retaining the first $k$ channels, and naturally enables variable-length autoregressive image generation. We validate our approach through extensive experiments on ImageNet, demonstrating consistent quality across diverse token budgets. The results establish a new quality-efficiency frontier: our model achieves state-of-the-art perceptual quality (rFID 2.92) while being $8.6\times$ faster in decoding and $2.1\times$ smaller (159M params) than the next-best alternative. Our work establishes channel-wise tokenization as a powerful and practical paradigm for efficient visual representation. Project page: https://channeltok.github.io

Data-Free Quantization (DFQ) addresses data security concerns by synthesizing samples, without accessing real data. It has garnered increasing attention in the context of Vision Transformers (ViTs), owing to the superiority of the self-attention mechanism compared to classical convolutional operation. However, previous DFQ arts for ViTs often suffer from a distribution mismatch between synthetic samples and input distribution expected by quantized models Q, resulting in the suboptimal performance. In this paper, we propose a novel Masked Attention Alignment approach for Data-Free Quantization of ViTs, named MaskAQ, revealing that: 1) the semantics in the self-attention mechanism is predominantly localized to a sparse subset of patches, called informative regions; 2) the informative regions dominate the mutual information between synthetic samples and Q's outputs. To these ends, we incorporate differential entropy maximum over patch similarity of synthetic samples, to decouple informative regions from noisy background. To couple with varied Q, the informative regions are selected to align full-precision models with Q via a masked attention alignment objective, thus yielding high-quality synthetic samples. Furthermore, a periodic sample refreshing strategy comes up to endow MaskAQ with the capacity to continually adapt to the evolving state of Q throughout the training process, to preserve desirable mutual information with synthetic samples. Extensive experiments verify the merits of MaskAQ over state-of-the-art approaches across multiple backbones and downstream tasks. Our code is available at https://github.com/hfutqian/MaskAQ.

The image-source model (ISM) is a widely adopted method for efficiently simulating acoustic room impulse responses (RIRs) under specular reflection assumptions. Acoustic paths between source and receiver are traced to lattice points computed from successive reflections over bounding planes of the room. Rectangular rooms bound the total number of image-sources to be polynomial in the RIR's duration or distance $k$ equivalent, with degree equal the number of room dimensions $N$. Direct ISM simulations are therefore compute upper-bound by $O \left ( k^N \right )$, and consider only cases of $N \leq 3$ for tractability and real-world applications. This work proposes an alternative computational method that lowers the asymptotic compute bound to $O \left ( N k^2 \log k \right )$ for integer coordinates and room dimensions via reducing ISM lattice point counting to the classic Gauss circle problem (GCP). We extend the lattice counting model to frequency-dependent and reflection weighted image-sources in higher dimensions, relating solutions between successive dimensions via the convolution operator. Two constructions for realizing RIRs are presented, along with time-frequency controls, error and run-time analysis, and RIR statistics.

As neural networks are increasingly deployed in safety-critical domains, testing is essential to evaluate and improve their reliability. Existing testing methods, whether black-box or white-box, primarily use global mutation or coverage-guided strategies, both of which struggle to efficiently uncover diverse model failures while remaining proximate to the original data distribution and semantics. We propose BayesWarp, a testing framework that addresses this limitation by mutating decision-critical input regions identified via interpretable saliency techniques and adaptively guiding the testing process using an uncertainty-aware Bayesian Optimization strategy, enabling the discovery of diverse failures while preserving distributional and semantic proximity to the original data. Evaluation on MNIST, CIFAR-10, and ImageNet across six neural network models shows that BayesWarp improves failure discovery, failure diversity, test case quality, and critical neuron coverage under a fixed mutation budget. These results demonstrate that BayesWarp improves testing effectiveness. Moreover, fine-tuning with the generated failure cases leads to improvements in model performance.

Computer vision is an area that has been growing continuously. With the advance of technologies with a first-person view, new development opportunities have emerged inside the area. Mixed reality promotes virtual environments with objects from the physical world shown in real time. For that, it's necessary to be concerned with the immersion of the user in this simulated environment, increasingly seeking to bring it closer to a possible desired reality. This paper proposes the development of image processing in order to perform the segmentation of images to identify what is foreground and background in order to facilitate the union of virtual and real images. Thus, the present work obtain real images of the user using the off-highway truck simulator CAT793F, through a camera, to be able to perform the segmentation of such images with artificial intelligence techniques.The convolutional neural network architectures "U-net" and "DeepLabV3+" are applied to perform image segmentation. As a result, metrics with around 90% accuracy were presented and and the best model was determined.

Transformers have become the dominant architecture for large language models, largely due to the scalability and flexibility of attention, feed-forward layers, residual connections, and normalization. This paper introduces dynamic short convolutions as an additional neural network primitive for improving Transformers. Unlike static short convolutions, dynamic convolutions use input-dependent filters, which preserves the locality bias of convolution while increasing expressivity. Motivating experiments show that applying dynamic short convolutions to key, query, and value representations improves performance on challenging associative recall tasks compared with static convolutional variants. Across language-modeling experiments ranging from 150M to 2B parameters, dynamic convolutions consistently outperform standard Transformers and Transformers augmented with static short convolutions. Fitting scaling laws indicates a 1.33$\times$ compute advantage over compute-matched Transformers when dynamic convolutions are applied to the key, query, and value vectors, and a 1.60$\times$ advantage when adding dynamic convolutions after every linear layer. Dynamic convolutions also offer improvements on linear RNNs (Mamba-2/Gated DeltaNet) and mixture-of-experts architectures. We make these gains practical with custom Triton kernels that enable efficient training with a manageable end-to-end slowdown. These results suggest that dynamic short convolutions are a scalable, hardware-efficient, and expressive primitive for advancing Transformer-based language models.

Vision-language models map visual features into a shared embedding space through learned projection layers, yet it remains unclear how these transformations alter the structure of visual information. This study examines changes in representation through spatial-frequency accessibility, measured by the linear recoverability of band-limited Fourier energy from model representations. To isolate effects beyond dimensionality reduction, we introduce Residual Spectral Loss (RSL), which evaluates changes relative to a dimension-matched random projection baseline. To reduce confounding effects from optimization, the analysis uses pretrained models with all parameters frozen. The experimental results show consistent frequency-dependent changes in accessibility across CLIP and DINOv2 on ImageNet and MS-COCO datasets. Spectral accessibility follows a non-monotonic trajectory across depth, peaking at intermediate layers before decreasing toward the output representation. The final transformation differs across architectures: CLIP's learned projection is spectrally neutral, with changes explained by compression, whereas DINOv2's [CLS] pooling induces a structured loss across the spectrum. These findings identify intermediate layers and pooling mechanisms as primary drivers of spectral transformation in modern vision encoders.

Vision Transformers (ViTs) have demonstrated strong representation capability in image classification. However, their quadratic self-attention complexity and large parameter counts limit deployment on resource-constrained mobile and edge devices. This paper introduces UtVAA, an ultra-tiny Vision Transformer architecture designed for efficient visual recognition under strict computational budgets. It incorporates a novel Affix Attention block that combines depthwise-pointwise local feature extraction, linear self-attention, coordinate attention for spatial dependency modelling, and a lightweight ternary fusion strategy to integrate local and global representations. In addition, Dilated Bottleneck blocks expand the receptive field using dilated depthwise separable convolutions while maintaining low FLOPs and stable optimisation through residual connections. UtVAA is implemented in scalable Tiny, Medium, and Large variants, with the smallest model containing 204.67K parameters and 53.95M FLOPs. Experimental results on CIFAR-10, CIFAR-100, PlantVillage-Tomato and SLIF-Tomato datasets show that UtVAA achieves competitive accuracy within a sub-million-parameter regime. Overall, the results demonstrate that transformer-based vision models can be redesigned into ultra-tiny architectures without significant loss in discriminative performance, making UtVAA suitable for mobile and edge deployment. Code is available at https://github.com/romiyal/UtVAA