Deformable Objects

Shape control of deformable linear objects (DLOs) is challenging for imitation learning because deformation behavior varies with material properties such as stiffness and elasticity, so a single policy must generate different action sequences for different objects even when the goal shape is identical. We propose a diffusion policy conditioned on material labels that are estimated online during manipulation. A recurrent estimation network predicts the material label of the grasped object from the time series of multi-view images and robot joint states, and the predicted label conditions the diffusion policy at every inference step. We collected 480 real-robot demonstrations covering four DLO materials and three groove-placement tasks, and compared per-material specialist policies, a task-conditioned policy without material labels, a policy conditioned on ground-truth material labels, and the proposed policy. Conditioning on ground-truth material labels improved the average success rate from 45.8% to 60.0% over the task-only policy, and the proposed policy reached 60.8% without any prior material information, matching the policy given ground-truth labels. A post-hoc analysis shows that the estimator extracts material-related information from the manipulation observations and that the diffusion policy responds to the resulting conditioning signal, while the one pronounced failure case is associated with persistent confusion between two similar materials.

Manipulating deformable objects (DOs) is challenging due to their high-dimensional state space, underactuated dynamics, and partial observability. In this paper, we propose cRVAE, a lightweight conditional recurrent variational autoencoder that estimates the full DO state from only partial corner-node observations during inference. The resulting model is used as the forward model in a receding-horizon optimal control framework for obstacle-aware collaborative DO manipulation. In simulation on rope and fabric, cRVAE estimates the full DO state from the available corner-node measurements alone, matching the accuracy of a parameter-identified XPBD model. At inference it uses no physical parameters as model inputs and performs no online parameter identification. It also runs approximately 350 times faster on the rope and over 1500 times faster on the fabric per forward pass, keeping horizon-based planning within the 100 ms control budget where XPBD exceeds it already at short horizons. Full-shape estimation from corner sensing at in-loop speed is what makes the model deployable on hardware, which we demonstrate on a Unitree Go2 robot.

Embodied AI, including vision-language-action and world-action models, must operate reliably in the physical world. Yet methods that perform well in simulation can degrade substantially on real robots, especially in long-horizon deformable-object manipulation, where policies must track changing states and execute reliable multi-stage bimanual interactions. Existing real-robot benchmarks mainly focus on short-horizon rigid-object tasks and offer limited coverage of long-horizon deformable manipulation. We introduce FolDeX, a physical-world benchmark built entirely from real-robot data, with garment folding as its primary task. Since real-robot data collection is costly, FolDeX studies how heterogeneous physical experience can be reused efficiently. The benchmark is organized around four research axes: leveraging human intervention and recovery data collected during deployment; transferring data across tasks, including across garment categories and from rigid to deformable-object manipulation; reusing data across scenes with changes in lighting, background, and layout; and transferring data across robotic embodiments. FolDeX provides 2,000+ hours of real-robot data spanning 20+ tasks and 10+ embodiments. We also establish a fair real-robot evaluation platform for externally submitted policies, with standardized tasks, held-out physical objects, controlled initializations, and a unified execution protocol. The platform is publicly accessible at https://ai.midea.com/#/fold-challenge. We hope FolDeX will serve as a unified testbed for heterogeneous real-robot data reuse and reliable long-horizon deformable manipulation.

Real-world observations of deformable objects are often sparse or surface-level, while downstream tasks require hidden physical quantities such as internal deformation, stress fields, and interaction forces. Physics-based simulation can recover these quantities, but online real-to-sim adaptation remains challenging due to costly full-space optimization, limited feedback, and time-varying material properties. To address these challenges, we propose RealSimLoop, a differentiable framework for online real-to-sim adaptation using vision data as physical feedback. Our approach achieves quasi-real-time performance by executing differentiable simulation within a reduced-order neural subspace, drastically accelerating the optimization loop. We couple this efficient dynamics model with differentiable rendering, enabling direct gradient backpropagation that leverages high-fidelity pixel data to refine physical parameters such as material stiffness. Furthermore, by employing a sliding-window objective function, RealSimLoop enables robust online adaptation, allowing the system to track time-varying material properties and effectively bridge the real-to-sim gap arising from model reduction or unmodeled dynamics. Extensive experiments demonstrate that our method outperforms conventional offline methods, and we validate the framework's versatility in downstream applications, including external force prediction and 3D stress field reconstruction with novel view synthesis.

Learning physically plausible dynamics from visual observations is essential for interactive world models and embodied agents. However, modeling real-world deformable objects remains challenging because their dynamics often arise from complex, spatially heterogeneous material responses. To address this challenge, we propose PhysReal, a video-driven framework for learning and simulating the underlying physics of real deformable objects. PhysReal integrates a spatially varying hybrid expert-neural constitutive model with a differentiable MPM simulator and 3DGS renderer. Analytical expert models provide interpretable physical priors, while neural constitutive residuals capture material responses beyond predefined formulations. Spatially distributed patches parameterize the constitutive field, enabling a continuous representation of local material variations. To organize the identification of this model from sparse visual observations, we adopt a progressive curriculum that sequentially optimizes global material properties, spatially varying local parameters, and neural constitutive residuals, together with complementary motion and mask supervision. Extensive experiments on diverse deformable-object interactions demonstrate that PhysReal achieves superior performance in dynamic reconstruction and future-state prediction, while showing strong potential for downstream robotic applications.

Deformable linear objects such as wires and cables are difficult to segment because they are thin, highly deformable, and frequently self-occluded, while large-scale instance-level annotations are expensive to obtain in real scenes. Existing resources either focus on cable tracing or semantic segmentation under constrained settings, or generate visually plausible images without physically grounded wire deformation. We present WireSeg-32k, a synthetic dataset for wire instance segmentation with 32,000 RGB images, instance masks, depth maps, and a complementary real-world test set with annotations. To generate this dataset, we develop DeformX, a co-simulation pipeline that couples Cosserat-rod dynamics with photorealistic Isaac Sim rendering, enabling physically plausible, contact-consistent wire shapes, CAD-based wire assets, and diverse visually grounded scenes. As a simple baseline, LoRA fine-tuning SAM3 on WireSeg-32k alone improves real-world mAP@75 by 10.2% over the off-the-shelf model, showing that physically grounded synthetic data can transfer to real wire perception.

We introduce CRESSim-Neo, a batched GPU simulation engine for surgical robotics and robot learning. CRESSim-Neo combines position-based simulation of rigid bodies, deformable tissues, fluids, and strands with batched rendering, surgery-specific sensing, and a GPU-resident data pipeline. The engine supports applications including tissue manipulation, fluid suction, suturing, cable-driven robots, and ultrasound image synthesis. Direct access to physics and rendering buffers enables GPU-resident robot learning and zero-copy PyTorch integration using DLPack. We demonstrate CRESSim-Neo across rigid-body, deformable-body, and fluid simulation tasks, including vision-based and surgical robot-learning scenarios. On an NVIDIA RTX 4090, the engine achieves up to 2.03 million environment steps per second for 8192 parallel CartPole environments, and scales to batched surgical scenarios involving tissue deformation, fluid interaction, and ultrasound sensing. Overall, CRESSim-Neo provides a unified and scalable platform for surgical simulation, synthetic data generation, and surgical robot learning.

We present LaGSplat (Latent Lagrangian Gaussian Splatting), a framework that infers interactive, physics-governed dynamics from one or a few monocular videos. At inference it lets a user push on the filmed object, rigid or deformable, with an external force that was never measured, annotated, or seen during training. This is possible because a low-dimensional latent state $\mathbf{q} \in \mathbb{R}^d$ plays two roles at once: it is the generalised coordinate of a learned dissipative Lagrangian and the conditioning variable of a Gaussian Splatting decoder. The inductive bias of this decoder, whose primitives are explicit points $μ_i(\mathbf{q})$ that move with the object, is what lets a force $f$ applied in the image pull back into a latent generalised force $J(\mathbf{q})^\top f$ and enter the equations of motion, which pixel-space (CNN) or neural-field (NeRF) decoders cannot do. We validate LaGSplat on test cases of increasing difficulty, from rigid to deformable and from autonomous to forced real systems, combining monocular video and sensor measurements. We further demonstrate interactive use: forces of arbitrary magnitude and direction can be applied to the reconstructed object at any time, its response rendered in real time, in 2D or 3D. Assuming a dissipative Euler-Lagrange equation over a few generalised coordinates trades generality for a bounded, plausible response to unseen forces, where an unconstrained predictor diverges.

This technical report describes the RMC2 Team's champion solution for the WBCD 2026 Track 4: Deformable Manipulation Challenge. The task requires a robot to pick a single T-shirt from a stack, load it onto a printing pallet, align the collar with a target area, and smooth the printing region, a sequence that involves single-layer separation, deformable transport, precise placement, and contact-rich surface adjustment. The competition strongly incentivizes fully autonomous execution, motivating the development of an autonomous solution. We built a fully autonomous system around the TCAM (TermiBrain Causal Action Model) framework, with the design principle that hardware, perception, data, and learning should jointly reduce the physical interaction complexity the policy must handle. A custom 3D-printed gripper designed for single-layer fabric separation improves picking reliability on a dual-arm ARX X5 platform. A wrist-centric four-camera setup pairs upper fisheye cameras for task-level context with lower RGB cameras for close-range gripper-cloth contact observation. We combine portable UMI-style demonstrations with real-robot demonstrations collected on the deployable platform to provide both broad manipulation priors and deployment-specific dynamics. TCAM ties these components into a closed loop: each trajectory is analyzed to identify the physical factors contributing to its outcome, driving targeted data recollection and policy fine-tuning. The policy outputs 30-step end-effector delta-pose action chunks from a multi-view VLA backbone. In the final competition, our system loaded 25 T-shirts at an average of approximately 23 seconds per attempt, with 22 achieving the required surface smoothness, securing first place in Track 4.

Creating photorealistic and temporally coherent animatable human avatars from RGB videos remains challenging. Current methods struggle to capture realistic cloth dynamics, producing over-smoothed appearance or severe artifacts on out-of-distribution poses. This limitation stems from a fundamental oversight: existing approaches neglect the temporal causality inherent in cloth physics, where current states emerge from previous states through temporal evolution rather than instantaneous skeletal configurations alone. Without explicit modeling of this causal structure, networks learn pose-appearance correlations instead of motion evolution, leading to poor generalization. We introduce a dual-stream autoregressive framework that explicitly models both observable geometric information and implicit internal state. The geometric stream propagates surface displacement from the previous frame, while the state stream fuses current features with historical states retrieved from a memory bank. Motion-adaptive aggregation handles spatially-varying dynamics, and adaptive regularization balances smoothness with flexibility. Experiments on challenging datasets demonstrate significant improvements in rendering quality, temporal consistency, and generalization to motion patterns beyond training distributions, validating that dual-stream temporal modeling enables realistic cloth dynamics.

Reconstructing objects with mechanical properties from video observations enables physically consistent dynamic prediction, benefiting robotics planning and interaction. Existing spring--mass based physical driven reconstruction approaches offer efficient and differentiable physical reconstruction, but they typically rely on axial springs alone. Such formulations oversimplify the underlying structural mechanics and can become mechanically under-constrained when the physical graph is coarsened, limiting their ability to preserve stable local deformation. We present BendTwin, a bending-aware differentiable spring--mass framework for video-based reconstruction and future prediction of deformable objects. BendTwin introduces bending stiffness and damping over local surface triplets, penalizing deviations from rest angles and regularizing higher-order deformation. These bending constraints improve mechanical stability while preserving the simplicity of spring--mass system. Experiments show that BendTwin consistently outperforms the axial-only PhysTwin baseline. Ablation studies further demonstrate that the bending constraints maintain system stability across different downsampling ratios and consistently improve upon the original PhysTwin formulation. Overall, BendTwin provides an effective approach for constructing mechanically faithful digital twins from sparse-view RGB-D videos.

Replicating real-world environments into simulation by realistic visual representation like NeRF and 3D Gaussian Splatting (3DGS) has emerged as an effective strategy to reduce the sim-to-real gap in robot learning. However, implementing object articulation during the real-to-sim process is still a challenging task. Existing motion tracking or learning based articulation methods shows low success rates on complex kinematic structures having multiple joints. Furthermore, those methods require scan of dynamic motion of objects, which makes reconstruction process much complicated. In this work, we propose the first end-to-end pipeline that reconstructs simulation-ready assets with accurate articulation from a single static object video input through suggestion based human-in-the-loop process. Our approach exports a hybrid representation combining 3DGS for photorealistic rendering and mesh-based geometry for physical interaction. In the reconstruction process, our pipeline performs convex decomposition followed by user grouping for intuitive part segmentation, subsequently binding 3D Gaussians to the corresponding mesh parts. An Automatic Joint Suggestion Algorithm then calculates candidate joint axes from local boundary geometries and presents them to users for efficient articulated asset reconstruction. We have shown that our method achieves precise articulation results on partnet-mobility-v0 dataset and real objects. Additionally we presented a potential usage of our framework on robot learning, deploying the reconstructed assets in Unreal Engine and NVIDIA Isaac Sim, demonstrating real-time dexterous hand manipulation tasks.

Convex Collision-Free Regions (CCFR) is a collision handling method that explicitly represents local convex feasible regions to enforce non-penetration. Each feasible region is constructed from surrounding mesh primitive configurations, including edge-edge and vertex-face interactions. The resulting convex region represents admissible non-penetrating vertex displacements at the current configuration. Existing collision handling methods for deformable body simulation have largely relied on implicit representations of feasibility, resulting in either compromised robustness for secondary collisions and codimensional contacts or tight coupling with specific nonlinear optimization schemes. Our formulation constructs feasible regions independently for each vertex, defined prior to penetration, inherently accounts not only for primary collisions but also for secondary collisions and codimensional contacts, enabling highly scalable and parallelizable collision handling. These feasible regions encode geometric non-penetration constraints independently of physical contact response models. CCFR does not rely on nonlinear optimization and is compatible with simulation frameworks such as Extended Position-Based Dynamics (XPBD) that do not explicitly maintain interior feasibility during iterative updates. The effectiveness of CCFR is demonstrated across cloth, hair, wire, particle systems, and codimensional contact scenarios, showing versatile and efficient collision handling.

Modeling continuous object deformation is important for many computer vision and robotics tasks, such as manipulation and simulation. Existing approaches rely on learning-based methods or physics simulators to model shape deformations. However, these approaches either use discrete time steps or are too computationally intensive for real-time applications. We present ODeform, a novel extension of Neural Ordinary Differential Equations to continuous 4D dynamics of deformable objects in 3D space. Our method transforms 3D point clouds and physical conditions (like material properties) into a unified latent space. By solving the resulting ordinary differential equations over time, we model deformations as continuous flows within this learned embedding, eliminating the need for discrete time steps while maintaining computational efficiency. We evaluate our approach on unseen physical parameter configurations, showing improved motion prediction accuracy over baseline methods. Our experiments further demonstrate a successful transfer to real 3D captured objects with novel shapes, along with effective interpolation and extrapolation of the learned dynamics. Our code and data will be made publicly available.

Predicting how deformable objects evolve under robotic manipulation is a longstanding challenge. Existing approaches typically rely on per-object optimization to fit material parameters, which can be slow and cannot generalize, while end-to-end learned alternatives extrapolate poorly and often violate basic physical structure. We present PhysCoRe, a physics-corrected residual world model that couples a differentiable Material Point Method (MPM) simulator with two feed-forward neural networks. A material refinement module, Material from Motion (MfM), infers per-particle elasticity from visual observations, grounding the simulator in object-specific physics. A residual correction module, Residual from Dynamics (RfD), learns the discrepancy and predicts corrections to the simulator's internal dynamics, absorbing systematic biases that the analytical model cannot capture. This design also supports online material identification on novel objects. MfM adapts from limited interactions, and its predictive uncertainty steers further exploration toward the regions where its estimate is least confident. Experiments on real deformable-object manipulation sequences show that PhysCoRe outperforms state-of-the-art baselines in prediction accuracy, and that its predicted confidence forms a reliable distribution across the object's geometry, providing a natural signal for future confidence-guided exploration.

Digital twins enable robots to anticipate and adapt to physical interactions, but existing models struggle with elastoplastic articulated objects (EAOs) that exhibit nonlinear elasticity, plastic yielding, and damage accumulation. We present BoxTwin, an interactive digital twin framework that learns the full dynamics of EAOs from videos. Our pipeline reconstructs the scene, identifies a physics aware constitutive model for each EAO. Experiments on manual folding and dual arm manipulation of EAOs show that BoxTwin accurately tracks joint trajectories and reproduces post contact plastic behavior over long horizons. By integrating video driven reconstruction with elastoplastic damage modeling, BoxTwin advances digital twins toward predictive, adaptive control of deformable articulated objects in unstructured environments.

Estimating the full shape of a deformable object is especially challenging when vision is unavailable: in the dark, inside an opaque bag, behind the manipulating hand, or under heavy self-occlusion. Touch is the natural sensor in these settings, but touches are sparse and local. We present a single topology-agnostic estimator that reconstructs the full mesh of a deformable object from only a few touches and no vision, using one permutation-invariant cross-attention architecture that handles a 1D rope, a 2D cloth, and a 3D volumetric soft body. The learned estimator reduces reconstruction error by roughly two-thirds relative to non-learned geometric mesh completion and a Gaussian-process surface baseline, and it outperforms a simpler global-pool set encoder, with the gap growing as more touches are observed. We then show that the estimator's deep-ensemble uncertainty can be used to learn where to touch next, which lowers error further and beats both random touching and a Gaussian-process active baseline at sparse budgets. This gain is modest on average but grows with self-occlusion and on the error tail. When vision is also available, where to touch barely matters, motivating the vision-free setting we study.

Surgical tissue retraction requires effective manipulation planning under partial and noisy perception. We study state estimation for deformable tissue retraction, where only sparse observations of the tissue surface are available at decision time. We propose a learned state estimator that reconstructs the full deformable mesh state from 40 noisy vertex observations. The estimator combines a multilayer perceptron with a low-dimensional PCA latent representation and is trained using geometry-aware regularization that encourages smooth and physically plausible deformations. We evaluate the approach in a 2D deformable sheet simulation using single-step and multi-step retraction planning. Results show that the learned estimator achieves 98.1% of oracle performance in multi-step retraction while supporting efficient inference. These results demonstrate that learned, geometry-regularized state estimation can support effective deformable manipulation under realistic perception constraints.

Simulating deformable objects is essential for a wide range of robotic manipulation applications, yet accurately predicting their dynamics remains challenging. We propose Physics-Guided Residual Dynamics (PGRD), a hybrid simulation framework that combines the advantages of physics-based and learning-based approaches. Specifically, PGRD combines an optimizable spring-mass simulator as a backbone with a learned neural network that predicts residual corrections to the physics-based predictions. We adopt a velocity-based formulation to ensure stable simulation and a sliding-window transformer architecture to capture temporal dependencies. We show that PGRD produces more accurate results than both purely physics-based and learning-based methods on a set of diverse real-world deformable objects. We further demonstrate the utility of PGRD in two applications: manipulation planning via Model Predictive Control, including a language-conditioned setting with a generated goal image; and interactive simulation via action-conditioned video prediction by 3D Gaussian Splatting.

Modern robot learning systems increasingly rely on dense progress or value signals to evaluate intermediate states, guide policy learning, and detect task completion, making the quality of these signals critical. Since such dense labels are rarely available at scale, normalized time within a demonstration is often used as a scalable substitute: later frames are treated as higher progress. However, this time-derived label is only a noisy proxy for physical task progress. In contact-rich manipulation, a robot may make progress and then lose it through slips, failed grasps, or partial undoing, while the time-derived label continues to increase monotonically. We introduce Unsupervised Robotic Value Correction (UR-VC), an offline, training-free method for correcting time-derived progress labels. UR-VC exploits a simple regularity in demonstration data: similar states often recur across different episodes, but at different timestamps. Instead of trusting the timestamp from a single trajectory, UR-VC retrieves similar states from other episodes and aggregates their time-derived labels to obtain a corrected progress estimate. UR-VC requires no manual progress labels, reward annotations, or additional value model. We evaluate UR-VC on real bimanual cloth flatten-and-fold data, a long-horizon deformable-object manipulation task with visible intermediate progress. The corrected labels capture local regressions and non-uniform progress that normalized time cannot represent, while preserving the overall task trend. We further use the corrected signal to construct advantage labels for VLA training, following recent advantage-conditioned policy learning. UR-VC shows a positive trend in real-robot task success under matched data, model, and training settings.

The development of assistive robots for dressing tasks serves to augment human convenience and improve the quality of life for individuals with physical impairments. However, due to the intricate contact interactions between garments and the human limbs during dressing, most robot-assisted dressing algorithms treat clothing as an assembly of discrete segments, thereby struggling to manage the partial worn garments under contact constraints. To overcome this challenge, we propose a novel robotic dressing control algorithm that integrates realtime differentiable clothing simulation. The simulation algorithm employs explicit iterative scheme with intentionally introduced higher-order perturbations to enhance computational efficiency while maintaining stability under large time-step conditions. Through simulation, we resolve the garment state under contact constraints, which then enables a multi-phase control strategy for successful coat dressing assistance. To further improve real-time performance, we introduce a constrained local model along with its corresponding optimization solver, permitting high-frequency local compensation for the differentiable simulation based global controller. Finally, we experimentally validate our approach through both simulated and physical dressing scenarios, conclusively demonstrating its feasibility and efficacy

Robotic surface swabbing requires sustained interaction between a compliant tool and heterogeneous environments, where accurate estimation of tip-level contact force is critical for consistent sampling performance. However, deformable tool dynamics introduce nonlinear viscoelastic hysteresis that decouples wrist-mounted force measurements from true contact forces, while tool-integrated sensors are impractical for deployment due to sterility and disposability constraints. This paper presents a data-driven framework for contact force estimation in Deformable Tool Manipulation (DTM) that leverages proprioceptive sensing without requiring explicit physical models or permanent embedded sensing hardware at the tool tip. A recurrent architecture is first identified through a comparative evaluation of temporal models, where a compact LSTM achieves the lowest estimation error and sub-millisecond inference latency. To address generalization across unseen surfaces and tool compliance conditions, we introduce a parameter-isolated few-shot adaptation strategy that augments a frozen recurrent backbone with low-dimensional context embeddings using feature-wise linear modulation (FiLM). Experiments on a UR5e platform across nine tool-surface interaction regimes demonstrate that the proposed approach significantly improves robustness under domain shift, reducing zero-shot estimation error by up to 63% while preserving baseline performance without catastrophic forgetting. These results show that separating shared deformation-history dynamics from domain-specific conditioning enables reliable force estimation for DTM in non-stationary environments.

Predicting object dynamics (i.e., world modeling) is a fundamental challenge for robotic manipulation, and modeling deformable objects presents a particularly difficult case due to their high-dimensional state spaces and complex material properties. While current world models approach this through two distinct paradigms: learning the dynamics over the 2D pixel space or more explicit 3D geometric space. A systematic understanding of their relative strengths and limitations remains elusive due to the lack of diverse, large-scale real-world data. To address this, we present Deform360, a large-scale visuotactile dataset featuring 198 daily-life objects, 1,980 interaction sequences, and over 215 hours of observations from 41 surround-view cameras and bimanual tactile grippers to capture both global motion and contact-induced local deformations. Leveraging a novel markerless visuotactile 3D tracking pipeline to extract dense geometry and motion, we systematically evaluate current state-of-the-art world models, comparing 2D video models against 3D particle models. Finally, we provide a preliminary demonstration indicating the real-world applicability of our dataset by performing robot planning tasks on deformable objects. Our analysis reveals key insights into the trade-offs between structural priors and scalability, providing a solid benchmark for future research in generalizable deformable object-centric world modeling. Project website: https://deform360.lhy.xyz

Linear-deformable manipulation remains challenging due to the complex deformations of objects such as cables and ropes. Prior data-driven approaches, particularly imitation learning, have shown some promise in narrowly defined settings but typically require thousands of demonstrations for specific tasks and cable types, limiting scalability and generalization. We introduce a sim-to-real reinforcement learning (RL) framework for multi-stage cable routing that leverages GPU-parallelized simulation to approximate linear deformable behaviors. Training across thousands of parallel simulations enables the learned policies to generalize across diverse cable geometries and deformation patterns. To bridge the sim-to-real gap, we propose a novel deployment strategy that combines a Simulation In the LOop (SILO) execution framework, localized RL policies, and robust cable state estimation. On real-world cable routing tasks, our approach achieves higher success rates and 2x reduction in cycle times compared to prior state-of-the-art learning methods. To our knowledge, this is the first successful sim-to-real transfer of RL policies for multi-stage cable routing. Videos and additional visualizations are available at https://silo-cable-routing.github.io/

Deformable object manipulation poses challenges beyond task completion: successful execution must also maintain safe physical interaction, holding the object stably without slip or drop while avoiding excessive deformation. However, existing manipulation benchmarks are predominantly success-oriented and rarely evaluate whether a policy remains physically safe throughout execution. We present SoftVTBench, a safety-aware visuo-tactile benchmark for physically constrained deformable object manipulation. Built in Isaac Sim with finite-element-simulated deformable objects, SoftVTBench provides multi-view RGB observations, RGB tactile sensing with marker motion, proprioception, and language instructions, and defines four matched task suites over object type (deformable vs. rigid) and variation axis (object vs. spatial). It separately reports Goal Success and Safety Success; the latter additionally requires no drop and peak deformation below a calibrated object-specific threshold, measured from policy-hidden privileged Finite Element Method (FEM) states. We implement pi0.5-based baselines under this protocol. Experiments show that success-only evaluation substantially overstates policy performance, as a large fraction of goal-completing rollouts still violate physical safety. Furthermore, incorporating tactile sensing improves Safety Success (e.g., from 21.4% to 35.6% on object-centric deformable tasks) and reduces object deformation during execution, while maintaining comparable Goal Success. SoftVTBench provides a reproducible benchmark for studying visuo-tactile deformable manipulation under physical interaction constraints.

While garments are essential for realistic digital humans, their topological variety makes them much harder to model than parametric bodies. Traditional tailoring relies on 2D sewing patterns, yet bridging these patterns to 3D geometry currently requires physical simulations. We present Stitched Embeddings, the first simulation-free framework to unify 3D garment reconstruction and sewing pattern inference within a single bidirectional latent space. By leveraging the geometric priors of a pretrained 3D foundation model, our approach overcomes the data scarcity typically associated with high-quality garment modeling. We propose to use the BoxMesh as a critical intermediate representation to align 2D panels into 3D configurations without the computational overhead of a simulator. This architecture achieves state-of-the-art accuracy in pattern reconstruction while significantly improving efficiency. Furthermore, our differentiable pipeline enables novel applications, including pattern recovery from meshes and 3D editing from 2D patterns. Finally, this work provides a scalable link between neural 3D vision and the physical garment manufacturing pipeline. Project Page: https://andreus00.github.io/stitchedembeddings

Generating realistic human avatars in complex motions--such as clothing dynamics--requires modeling of global and local deformations which remains challenging in monocular settings. We address this problem by leveraging neural Jacobian fields (NJFs) for representing semi-rigid deformations. We train self-supervised neural networks for predicting Jacobian matrices that give the pose-dependent deformations, by solving a Poisson equation. However, monocular input presents several difficulties such as self-occluded regions and invisible surfaces. To address these issues, we introduce three key components: a constrained Poisson solver, signed distance-based Jacobian regularization, and a deformation-guided residual flow loss, which together suppress boundary artifacts, recover frequently occluded regions such as armpits and thighs, and enforce temporal consistency during motion. Experiments on benchmark and in-the-wild videos demonstrate that our method generates temporally stable and geometrically coherent avatars, outperforming state-of-the-art approaches.

We propose a mask-free method for lossless multi-object 3D reconstruction from sparse and occluded real-world views, enabling physically plausible robotic interaction via Material Point Method (MPM) simulation. Our key insight is that object coupling stems from occlusion and limited viewpoints, which we address by formulating multi-object decoupling as a sparse-view reconstruction problem. Using 3D Gaussian Splatting as base representation, we first obtain coarse instance partitions with a SAM2-trained segmentation field. Rather than relying on masks, we reconstruct fragmented geometries by leveraging a joint Score Distillation Sampling (SDS) process, which integrates reference-view supervision with novel-view synthesis guided by 2D and 3D diffusion priors to enforce both texture fidelity and 3D consistency. Furthermore, we incorporate geometry-aware priors such as intra-object and inter-object similarity to regularize geometric reasoning. Experimental results demonstrate that our method produces complete, simulation-ready 3D objects without requiring manual masks, enabling realistic dynamic interactions on both synthetic, robotic and real-world datasets.

Keypose-based manipulation decomposes tasks into critical waypoints to simplify policy learning for long-horizon tasks, but existing approaches rely on task-specific heuristics or manual annotation to extract keyposes from demonstrations. We present an automatic trajectory labelling pipeline for grasp-related tasks. This pipeline combines vision-language models (VLMs) for semantic event detection with classical trajectory analysis for precise temporal alignment, requiring VLM inference only on one single demo among repeating ones per task. Using the labelled data, we train a keypose-guided Diffusion Policy (DP) that exploits keypose conditioning to intervene demonstration distributions. We explore the possibility to apply this property for cross-embodiment transfer: candidate keyposes are sampled and filtered via a reachability map, steering the policy toward kinematically feasible keyposes for the target robot. As a preliminary feasibility study, experiments on two robomimic tasks show that the labelled data produces policies matching a standard DP baseline, and that reachability-filtered keypose conditioning may benefit zero-shot transfer on the multimodal insertion task when feasible candidates are available.

Scaling imitation learning requires large datasets, yet human teleoperation inevitably produces mixed-quality demonstrations containing hesitations and recoveries. Prior frame-level progress reward models supervise on absolute temporal progress proxies that suffer from label noise, or require costly human annotations to define subtask boundaries. We present WARP (Warp-Augmented Relative Progress), a novel fully self-supervised algorithm for learning dense, signed relative progress magnitudes directly from successful demonstrations. WARP generates per-frame progress targets via time-warp augmentations of demonstrations (variable playback speeds and reversals) and we train WARP-RM to predict the normalized elapsed time between input frames. Aggregating these predictions across overlapping windows yields a dense frame-level progress signal. We then introduce WARP-BC, which leverages these scalar reward estimates to upweight high-advantage action chunks during behavior cloning, where chunk-level advantage is obtained by aggregating per-frame rewards. We evaluate our approach on a physical bimanual robot system performing a long-horizon deformable object manipulation task: folding T-shirts from a random crumpled start. To evaluate policy robustness against suboptimal data, we construct training datasets of varying quality using episode length as a proxy for teleoperation sub-optimality. As the dataset is widened to admit more inefficiencies, WARP-BC maintains a 19/20 success rate compared to vanilla BC's collapse to 2/20, improving throughput by up to 18x. Furthermore, we evaluate a bottle-in-bin placement task in the real-world, as well as in a reproducible simulation of the task, where gains in success, speed, and throughput hold under paired significance tests, and we release all simulation code and evaluation artifacts. Project page: https://uynitsuj.github.io/warp-rm/

Demonstration augmentation is proposed for cost-efficient data acquisition, but existing methods are fundamentally limited in deformable manipulation due to two challenges: (1) the state space is high-dimensional with physics-induced constraints, making valid configurations impossible to reach via low-dimensional pose perturbations; and (2) trajectory transfer is non-equivariant, as material points no longer move rigidly together under deformation. We present DeformGen, a dynamics-based augmentation framework that achieves topological diversity for deformable objects. For the state challenge, DeformGen expands the valid state distribution by applying localized physical disturbances and forward-simulating the dynamics to obtain topology-coherent, physically plausible deformable states. For the trajectory challenge, DeformGen transfers source manipulation trajectories via deformation-field warping, which lifts per-particle displacements into a continuous spatial function to adapt the end-effector trajectory consistently with the deformed geometry. In this way, our method jointly augments the state distribution and its associated manipulation behavior. Experiments on high-fidelity deformable manipulation benchmarks show that DeformGen generally improves policy learning compared with training on the original demonstrations alone and with rigid-style augmentation baselines.

Reconstructing realistic, physically plausible garments from a single image remains a fundamental challenge. Template-free methods capture surface geometry but lack explicit sewing structure for simulation; while programmatic systems are simulation-ready but constrained by predefined templates. This reveals a fundamental representation gap between geometric reconstruction and structured garment construction. We present PatternGSL, a structured garment representation in the form of a template-free and learnable specification language that encodes complete sewing patterns, including panel boundaries, parameterized seams, and explicit stitch topology, in a compact and standardized form. PatternGSL preserves the physical rigor of pattern-based models while removing template dependence, elevating sewing structure as a first-class target for generative modeling. We further propose a vision-language framework that predicts PatternGSL specifications directly from a single image and decodes them into garments using lightweight deterministic validity handling, without optimization-based refinement or manual cleanup. In addition, we introduce PatternGSLData, the first large-scale image-to-GSL paired dataset comprising 300K samples with complete sewing pattern annotations, enabling supervised VLM training for structured garment reconstruction. Experiments demonstrate improved pattern accuracy over prior baselines, explicit sewing-structure recovery, reliable cloth simulation, and pattern-level editing through the same deterministic decoding pipeline. Code and data-processing scripts will be released at https://lagrangeli.github.io/PatternGSL/.

Simulator-in-the-loop optimization offers a promising inference-time mechanism for robot manipulation. It uses a physical simulator as a backend rollout engine to evaluate candidate trajectories in parallel and refine nominal actions online, a paradigm proven effective in rigid-body manipulation where state and contact are relatively tractable. We bring this paradigm to real-world cloth manipulation from a single RGB input through three pillars. (i) We design a scalable synthetic-data generation and inference-time rollout pipeline built on FLASH, a deformable-object simulator that provides a practical balance among physical fidelity, numerical stability, and rollout efficiency. (ii) We develop a real-to-sim module, trained purely on synthetic data, that maps a single RGB observation to simulation-compatible cloth state by fusing pretrained visual features with learnable canonical tokens. (iii) We perform online planning by coupling a sparse-mesh rollout backend with prior-guided MPPI, anchored at an offline-distilled policy trajectory, preserving manipulation-relevant deformation and contact while enabling sufficient parallel rollout batches. Real-robot experiments show higher success rates and stronger robustness than baseline methods.

Deformable linear objects (DLOs) such as wires, cables, and ropes are common in robotic manipulation tasks, yet simulating them with both visual realism and physical accuracy remains challenging. Existing visual simulation methods typically rely on procedural geometric primitives that lack physically grounded deformation behavior, while physics-based approaches with robot learning support often approximate DLOs as rigid-link chains or generic soft bodies, failing to accurately capture the bending, twisting, and shear mechanics of slender elastic structures. In this work, we introduce DeformX, a co-simulation framework that integrates a dedicated Cosserat rod physics engine with NVIDIA Isaac Sim, enabling DLO simulations that are both physically faithful and visually realistic. Our Cosserat rod engine simulates the dynamics and self-collisions of DLOs, and contact interactions with arbitrary free-form meshes. To achieve high-fidelity visualization, we employ mesh skinning to map discrete rod deformations onto imported CAD models. To the best of our knowledge, DeformX is the one of the first frameworks for DLO simulation that unifies realistic visualization, principled physics, and compatibility with robot learning pipelines. We demonstrate its versatility across synthetic data generation and policy learning for DLO manipulation, and validate visual and physical fidelity through comparisons against real-world experiments. Notably, fine-tuning Segment Anything Model 3 (SAM3) on DeformX-generated data yields a 10.2% mAP@75 improvement in real-image wire segmentation, and a rope-swinging policy trained entirely in DeformX achieves a mean target-hitting error of 6.6 cm on a UR5e manipulator in real-world trials, highlighting its strong sim-to-real transfer capability.

3D human avatars have shown impressive visual fidelity driven by pose-conditioned models, yet they still lack the physical ability required for interactions with each other and environments. Although recent studies have made various attempts to incorporate physical characteristics into 3D avatars, they only exhibit limited physical deformations, often leading to constrained interaction behaviors. To resolve this issue, we present PIAvatar, a framework to simultaneously enable physically aware interactions between avatar-avatar and avatar-environment, and a non-rigid deformable human body simulation. In this work, our key insight is to decouple kinematic velocity from deformation gradient. When external forces act on avatars, the kinematic velocity induces stress which hinders the avatar's ability to achieve a desired pose. In addition, we integrate a skeletal framework within the avatar. It allows estimating its poses and real-time tracking in a closed form, even during non-rigid physical interactions. Our approach is implemented within a conventional Material Point Method framework to ensure physically consistent dynamics. We lastly evaluate the method on both human-object and human-human interaction scenarios to assess its behavior under diverse interaction settings.

Accurate mechanical properties (or materials) Young's modulus ($E$), Poisson's ratio ($ν$) and density ($ρ$) are essential for reliable physics simulation of digital worlds, but most 3D assets lack this information. We propose AdaVoMP, a method for predicting accurate dense spatially-varying ($E$, $ν$, $ρ$) for input 3D objects across representations, improving the resolution, accuracy, and memory efficiency over the state-of-the-art. The foundation of our technique is a sparse and adaptive voxel structure SAV that efficiently represents both the input 3D shape and the material field output. We replace the fixed-voxel model of the most accurate prior method, VoMP, with a novel sparse transformer encoder-decoder model that learns to generate a unique SAV autoregressively for every input shape to represent its materials, achieving a resolution $16^3\times$ higher than prior art. Experiments show that AdaVoMP estimates more accurate volumetric properties, even with lesser test-time compute than all prior art. This allows us to convert high-resolution complex 3D objects into simulation-ready assets, resulting in realistic deformable simulations.

Deformable Linear Objects (DLOs), such as wires and cables, are central to industrial assembly. Unlike rigid objects, whose state is captured by a 6-DoF pose, DLOs have an infinite-dimensional configuration space and deform continuously under contact with grippers, fixtures, and the workspace, making them a demanding benchmark for general dexterous manipulation. Despite their importance, policy development and comparison remain difficult: existing benchmarks are often tied to specific hardware setups, lack modular and customizable task assets, or study generic deformable-object tasks without the fixtures relevant to real-world industrial wire manipulation. Few benchmarks align simulation, real-world data, and shared evaluation protocols. To bridge this gap, we introduce WireCraft, a simulation benchmark for industrial DLO manipulation with configurable difficulty and assets, spanning three task families: connector insertion, clip routing, and channel seating. It supports two complementary DLO physics models, articulated and deformable, and the trajectories come from both simulation and a physical UR5. We benchmark reinforcement learning (RL), imitation learning (IL), and vision-language-action (VLA) policies under shared metrics. Privileged state-based RL solves a representative setting in each task family with over 82% success, confirming the tasks are well-posed. For connector insertion, however, the transition from reaching the socket to contact-rich alignment remains a key bottleneck for vision RL, IL, and VLA policies. These results indicate that industrial DLO manipulation, though tractable under privileged state, remains an open challenge for current vision-based learning. The benchmark, data, and tools will be open-sourced upon acceptance.

Most existing approaches either fix the container in advance or optimize only a single container dimension through an outer search loop, leaving the remaining dimensions as a manual tuning problem. We present a differentiable packing framework that jointly optimizes all 6N object pose parameters and all three container side lengths inside a single gradient-based loop. The formulation combines six physics-inspired, differentiable loss terms computed directly on triangle meshes through axis-aligned bounding-box proxies. An adaptive squeezing mechanism periodically tightens the container whenever the overlap loss falls below a pair-count-scaled threshold, producing a large initial drop in container volume, followed by small refinements. All pairwise computations are written in tensor-broadcasting form, giving a 3.4 to 54 times speedup over a reference loop-based implementation. The pipeline is implemented in Python and PyTorch, with no physics engine, FFT library, or convex decomposition. On multiple object categories, the method produces containers that are 11 to 32 percent smaller than time-matched DBLF and simulated-annealing baselines at N =100, while running in under 4 minutes per instance on a single consumer GPU.

Humans naturally understand object physics through everyday interactions, but faithfully predicting complex deformable dynamics, such as elastic materials and fabrics, remains a major challenge for computer vision and robotics. We present EgoPhys, a framework that constructs deformable physical digital twins from egocentric RGB-only video using generalizable priors. EgoPhys overcomes the limitations of existing methods to enable controllable deformable digital twin generation from egocentric videos by distilling per-object inverse-physics solutions into a compact codebook, enabling prediction of dense spring stiffness fields for unseen objects without per-spring test-time optimization. Trained with generalizable priors from diverse egocentric interactions, EgoPhys outperforms baselines in reconstruction, future prediction, and zero-shot generalization. To support training and evaluation, we curate an egocentric interaction dataset covering diverse deformable objects, scenes, and manipulation styles. We deploy EgoPhys on a real xArm6 robot, demonstrating that a digital twin initialized from a single egocentric human play video can serve as an internal world representation to aid in deformable-object planning, highlighting egocentric RGB observations as a scalable path toward real-to-sim pipelines.

RGB sim-to-real for deformable manipulation has remained largely unsolved without real-world fine-tuning. We present SimWeaver, which trains zero-shot RGB VLA policies on 200 simulated demonstrations per task, reaching above 80% per-task and 91% average real-world success across 5 diverse deformable tasks including plastic-bag manipulation, without teleoperation or per-task calibration. SimWeaver combines a reliable measurement-backed simulator (SimWeaver-Sim) with an extensible asset framework supporting single-image generation(SimWeaver-Asset), a deterministic topology-aware trajectory synthesizer (SimWeaver-Syn), and a sim-to-real protocol with ISP-aware photometric augmentation (SimWeaver-Real). On silk grasping, the sim-trained policy reaches 100% under visual distribution shifts where real-data baselines drop to 9-70%, at two orders of magnitude lower per-trajectory cost. We will release SimWeaver and a representative asset subset. Project page: https://simweaver.github.io/

We present CORD-SLS, a real-time control method for safe deformable object manipulation, with a focus on ropes and cloth. At its core is a GPU-parallel differentiable simulator with contact smoothing which enables efficient gradient-based planning through intermittent contact. To robustly satisfy constraints under model and sensing uncertainty, we develop a real-time, GPU-parallel output-feedback robust model predictive control (MPC) algorithm that plans with this simulator. We further show that the simulator accelerates model-based RL for training neural manipulation policies. To improve real-world robustness, we use conformal prediction to calibrate visual-feedback and perception-error bounds for MPC, producing reachable tubes that enable high-probability safe control. We evaluate CORD-SLS on high-dimensional, contact-rich rope and cloth manipulation tasks in simulation and hardware, including obstacle avoidance, routing, folding, and smoothing. Across settings, CORD-SLS achieves millisecond-speed planning, exceeding baselines in safety, speed, and task success.

While diffusion-based virtual try-on has achieved impressive visual realism, most methods treat the task as 2D inpainting, prioritizing texture preservation over physical plausibility. Consequently, they often produce plausible-looking images that fail to reflect authentic garment fit across diverse body shapes. We present FitVTON, a Fit-aware virtual try-on model on different bodies in the wild. FitVTON encodes garment-body size through structured text prompts, and learn from simulated try-on triplets from parameterized garment model. To improve the fitting effects over garment silhouettes, we introduce two auxiliary head to predict the masks for both the garment and the exposed body. We further introduce a texture rectification stage to improve realistic appearance from simulated data. To evaluate the fitting fidelity, we curate a real-world dataset, FittingEffect3K, combining VLM-based scoring protocol. Both subjective and quantitive experiments show that FitVTON demonstrate authentic fitting fidelity, with significant sizing accuracy and shape preservation over state-of-the-art methods while maintaining competitive image quality. Project Page: https://zenoning.github.io/FitVTON/.

With the growing demand for realistic virtual humans, parametric body models have become a cornerstone of modern medicine, sports, and entertainment applications. However, most of these models are inherently limited: they only capture the 3D surface of the skin, offering no insight into the complex bio-mechanical structures that generate motion. As more applications expand towards biomechanics, the need for virtual human models that go beyond the skin has become increasingly evident. Traditional soft-tissue simulations, such as FEM, are accurate but non-scalable and too computationally expensive for most common applications. Alternatively, existing biomechanical tools can simulate muscular forces and activations, but do not model changes in external shape, restricting how activations correlate with actual observable anatomy. This motivates a novel inverse research problem: recovering muscle deformations directly from visible surface observations - i.e., from the skin, and thus the pose. In this work, we present SOMA (from Surface Observations to Muscle Anatomy), a person-specific model that infers spatio-temporal muscle behavior from surface signals obtained using RGB cameras, and SKIM, a subject-specific soft-tissue deformation dataset. To the best of our knowledge, this is the first method that attempts to recover muscle deformations from multi-view RGB data. We show how our method provides anatomically grounded animations without the complexity of traditional simulations, leading to a scalable and cost-effective solution. Data and code are available.

Robotic manipulation of textiles remains challenging because continuous deformation and self-occlusions hinder the robust visual perception required to estimate the cloth's state. To address the lack of annotated real-world data, we developed a Blender-based synthetic pipeline exporting auto-annotated keypoints, and combined manually labeled renders with real-world data to train a wrinkle detector. We present a perception framework integrating a CNN for permutation-invariant keypoint detection and a YOLOv8-OpenCV pipeline to extract grasping points from structural wrinkles. A proposed bimanual algorithm uses this system to stretch fully folded garments via wrinkles, transitioning to keypoint-based ironing once corners emerge. The keypoint model achieves a Mean Position Error (MPE) of 1.7615 pixels. The perception system transfers to physical fabrics without fine-tuning, outperforming baselines that fail in high-occlusion states or yield false positives on severe folds.

Deformable object manipulation (DOM) is challenging due to high-dimensional, partially observable states that evolve through long-horizon, topology-changing interactions with multiple valid manipulation modes. We introduce Instant-Fold, an in-context imitation learning framework for DOM. Given a single human demonstration, our policy infers and executes diverse manipulation modes directly from the demonstration, including variations in spatial execution and ordering, without requiring gradient updates. Our approach first learns deformation-aware visual representations via temporal contrastive pretraining, after which a flow-matching transformer policy conditioned on the demonstration predicts actions to execute the intended manipulation mode. Trained entirely in simulation, Instant-Fold generalizes across diverse folding modes and transfers zero-shot to real-world settings without additional data collection or finetuning. Videos are available at https://instant-fold.github.io.

We address the challenge of enabling robots to manipulate deformable linear objects (DLOs), such as ropes, cables, and rubber bands. Prior work has primarily focused on narrow, task-specific problems, often relying on real-world demonstrations or handcrafted heuristics. Such approaches, however, struggle to scale to the wide variety of materials and tasks encountered in practice, and collecting sufficiently diverse real-world data is often impractical. Additionally, existing simulation environments offer limited support for the broad spectrum of material behaviors necessary for generalizable DLO manipulation. To overcome these limitations, we introduce a differentiable simulator explicitly designed for versatile DLO manipulation. Our simulator models a wide range of material properties-including (in)extensibility, elasticity, bending plasticity, and complex interactions with other objects-providing a robust foundation for learning and evaluating manipulation skills. Building on this simulator, we propose a benchmark suite of representative tasks that highlight the unique challenges of DLO manipulation. The successful execution of these tasks is often hindered by the topological complexity and grasp sensitivity inherent to DLOs. Therefore, we introduce a specialized DLO agent that explicitly manages these challenges by proposing strategic grasping points and decomposing long-horizon tasks to maximize control authority. Finally, we evaluate various policy-learning algorithms using our framework, alongside sim-to-real transfer experiments, demonstrating our platform's potential to advance DLO manipulation.

Real-world household robots require Vision-Language-Action (VLA) foundation models that can acquire reusable manipulation skills across diverse objects, task conditions, and household environments. Deformable-object folding is a representative challenge, requiring robots to handle clothing items from random initial states across varying categories, geometries, materials, and scenes. However, existing VLA systems commonly train separate policies for different object categories, while naively mixed multi-task training often suffers from task interference and degraded performance. To move beyond category-specific folding policies, we introduce DeMaVLA, a VLA foundation model for generalizable Deformable Manipulation. DeMaVLA adopts a VLM backbone with an action expert and formulates continuous action generation using flow matching. To improve efficiency, the action expert is constructed by pruning every other transformer layer while preserving layer-wise alignment with the VLM backbone, reducing training and inference cost. DeMaVLA is first pre-trained on approximately 5,000 hours of selected real-world dual-arm demonstrations to acquire general manipulation priors. It is then post-trained on mixed folding data that aggregates self-collected demonstrations and corrective trajectories from real-robot failures across multiple folding tasks through a human-in-the-loop Data Aggregation~(DAgger) pipeline. Experiments show that DeMaVLA achieves competitive performance on RoboTwin 2.0 and strong real-world results on our household folding benchmark. These results highlight the value of scalable real-world data, efficient action generation, and corrective learning for general-purpose VLA policies in deformable-object manipulation.

Existing inverse physics methods recover physical parameters from multi-view videos, where geometric constraints across views resolve scale and 3D structure. In monocular settings, however, such constraints are absent, leading to severe scale ambiguity, inaccurate geometry, and weak coupling between appearance optimization and physical simulation. We propose MonoPhysics, a framework for monocular inverse physics estimation of deformable objects using differentiable MPM simulation and 3D Gaussian Splatting, which jointly optimizes geometry, appearance, and physical parameters from a single camera view. We address these challenges through three visual-physical bridges: global scale alignment, physics-aware geometry refinement, and a differentiable position map, which together enable accurate optimization from monocular observations alone. We evaluate on Vid2Sim and our new dataset of elastic and plastic objects, showing that MonoPhysics outperforms existing baselines in monocular settings and achieves performance comparable to multi-view baselines using only a single camera. Our project page is available at https://daniel03c1.github.io/MonoPhysics/

This work addresses the problem of recovering complete, simulatable object geometry from reconstructed real-world scenes, enabling physics-based interaction with objects embedded in the scene. While modern multi-view reconstruction methods can produce visually accurate environments, objects are often incomplete due to occlusions and limited observations, making them unsuitable for physics simulation. To address this limitation, we propose SAM3D-Phys, a framework that integrates scene reconstruction with generative 3D priors of SAM3D to recover physically simulatable objects. Our approach first reconstructs the scene from multi-view images to obtain scene geometry and partial observations of objects. We then leverage SAM3D to infer complete object geometry from these partial observations. To ensure that the recovered objects remain consistent with the reconstructed scene, we restore scene-consistent object states through two complementary strategies: a physics-constrained spatial optimization algorithm that iteratively aligns the recovered object to its original location, and a mask-guided appearance distillation module that refines texture fidelity based on the observed images. By recovering complete object geometry and restoring its pose and appearance within the scene, SAM3D-Phys produces clean object representations suitable for physics-based simulation, enabling simultaneous and physically consistent interactive simulation of multiple objects within a reconstructed scene. Project page: https://chnxindong.github.io/sam3d-phys/

This study addresses the partial-to-complete geometry reconstruction of deformable objects (DOs) from point-cloud observations toward precise DO manipulation. Recent DO reconstruction approaches often adopt implicit neural representations (INRs) to model continuous surfaces as well as capture structural variability. However, these methods typically rely on object-specific shape priors that improve training stability and limit generalization. To figure it out, we introduce ParCo-SDF, a two-stage partial-to-complete signed distance field (SDF) reconstruction framework consisting of temporal geometry encoding followed by FiLM-conditioned SDF prediction. The temporal encoder captures structural similarity across DO sequence, enabling prior-free stable training. FiLM-based conditioning preserves reconstruction expressivity while reducing network complexity. We evaluate the proposed method against a state-of-the-art DO surface reconstruction baseline on a rubber band manipulation dataset, demonstrating robust and high-fidelity reconstruction under severe occlusions.

This paper presents a phase-conditioned, force-aware framework for robust deformable object manipulation. Standard imitation learning policies such as Action Chunking with Transformers (ACT) rely on a Markovian assumption at inference, causing state aliasing when visually similar observations require contradictory actions and preventing autonomous recovery from execution failures. We address this with a closed-loop hierarchical architecture. A FiLM-conditioned ACT encoder modulates feature extraction based on the current task phase, enabling a single unified policy to produce phase-specific behaviors while sharing action dynamics across phases. A multi-modal phase predictor fusing visual, force, and pose feedback estimates the phase in real time, detecting contact failures that are invisible to vision alone and autonomously triggering recovery trajectories. The system is completed by a hybrid impedance controller for compliant execution and a haptic teleoperation interface for force-aware data collection. Ablation studies show that FiLM-based modulation significantly outperforms both unconditioned and token-level conditioned baselines, and t-SNE analysis confirms that FiLM induces well-separated, phase-specific feature representations. Validated on hanging and removing a T-shirt with dual arms, the closed-loop system improves the hanging success rate from 56% to 87% through autonomous error recovery. Code and videos: https://leledeyuan00.github.io/phaser/

We present a novel formulation for mesh-free, reduced-order simulation of deformable hyperelastic objects. Existing work in reduced-order elastodynamic simulation represents the input geometry by either meshes, which can be difficult to obtain due to challenges in scanning and triangulating complex shapes, or by neural fields that require per-shape optimization. We propose to adopt a Reproducing Kernel Particle Method (RKPM) representation, which enables the construction of reduced-order skinning weights by solving a generalized eigensystem on the Hessian matrix of the elastic energy. We demonstrate that this formulation not only leads to a 40x training speedup compared with the per-shape optimization of neural fields, but also achieves lower simulation error when evaluated against the converged results of finite element method. We show our simulation results on a wide variety of objects in different representations including meshes and Gaussian splats, as well as the application of our method in the downstream task of robot simulation.

Unified and scalable Transformers have recently achieved remarkable success in modeling diverse phenomena traditionally associated with computer graphics, such as 3D visual effects, rendering processes, and motion in videos. In this work, we take a step further by investigating whether modern Transformer techniques can tackle the challenging task of cloth simulation. To this end, we present ClothTransformer, a framework that reformulates cloth simulation as autoregressive sequence modeling in a learned latent space. Existing neural cloth simulators are largely specialized to single scenarios, intrinsically coupled to the mesh discretization, and lack robust collision handling. Our approach addresses these limitations through three contributions: (1) a unified Transformer architecture that handles diverse scenarios -- body-driven garments, robotic manipulation, and free-fall collisions -- under a single model and achieves approximately $4$--$9{\times}$ lower error than prior state-of-the-art methods across all scenarios; (2) a scalable latent-space formulation that compresses arbitrary-resolution meshes into a fixed-size set of latent tokens, making temporal dynamics computation independent of mesh resolution; and (3) a diverse-scenario high-fidelity penetration-free dataset of ${\sim}$493.4k frames spanning all three settings, which enables a differentiable Continuous Collision Detection (CCD) module to suppress penetration artifacts. Project Page: https://yucrazing.github.io/clothtransformer/

We present Artiverse, a diverse and physically grounded dataset of high-quality articulated 3D objects designed for realistic functional modeling and simulation. Artiverse contains 5.4K human-authored objects across a broad range of 88 categories, aggregated from multiple 3D static repositories. Objects are annotated with functional parts, interior structures, realistic kinematic relationships and articulated joints including multi-DoF joints, and physical attributes such as metric scale, material, and mass. We develop a semi-automated annotation pipeline that combines few-shot segmentation, geometric reasoning, and multi-stage human verification to achieve high-quality and efficient annotation, reducing manual annotation time by over 30%. We demonstrate the value of Artiverse on tasks of part mobility analysis, articulated object generation, and physics-based interaction. Artiverse provides a data resource to advance functional understanding for articulated objects.

Robotic manipulation of deformable linear objects (DLOs) presents significant challenges due to complex dynamics and frequent self-occlusions. Existing robotic knot tying methods typically rely on precise topological state tracking with ordered keypoints and explicit edge connectivity. This reliance makes them prone to failures due to tracking drift and topology mismatch caused by repeated bending and crossings during knot formation.To address these limitations, we introduce RoboHitch, a novel framework that learns to perform hitch knot tying from human demonstrations using only disordered 3D keypoints and RGB images. This eliminates the need for explicit topological order, allowing for more flexible manipulation. Our method employs a dynamic Graph Autoencoder to extract geometric features from untracked keypoints, complemented by a Convolutional Autoencoder that captures essential visual context. A bidirectional cross-attention mechanism then fuses these modalities to jointly predict pick and place affordances, facilitating implicit reasoning about the rope's state and enabling knot tying under occlusion.Real-world experiments demonstrate the effectiveness and generalizability of our approach, successfully completing hitch knots in scenarios with self-occlusions.

We present IsaacIPC, a robotic simulation framework that couples GPU accelerated incremental potential contact (IPC) with IsaacSim/Lab. IsaacIPC maps simulated deformation between simulation and visual meshes, enabling real-time realistic rendering with applications to data collection and policy evaluation. For tactile sensing, we introduce the geometric mortar contact potential (GMCP), which defines a barrier potential over contact samples on tactile surfaces to better resolve contact-pressure distributions. We evaluate GMCP on contact benchmarks and demonstrate IsaacIPC on rigid-deformable robotic simulations including a quadruped robot, a dexterous hand, and a universal manipulation interface (UMI) gripper.

Pose-driven full-body avatars built on neural rendering produce high-quality novel views of a captured subject. Yet loose clothing and other dynamic elements deform in ways pose alone cannot explain: the same pose can correspond to many different states, because their motion depends on history, inertia, and contact. Explicit simulation and layered-garment methods can model such dynamics, but they require either a dedicated garment template, which raw multi-view capture does not naturally provide, or a test-time physics simulator with non-trivial runtime cost. A parallel line of work learns data-driven clothing avatars that avoid explicit garment layers. These methods add an auxiliary latent for variation beyond pose; at inference, they fix it, regress it from pose, or retrieve it from training data, without explicitly modeling how the latent evolves with its own dynamics. Additionally, even in everyday motion with loose clothing, existing architectures often struggle to capture fine-grained detail, producing blurry renderings and temporal artifacts. We augment a pose-conditioned 3D Gaussian avatar with a transformer-based decoder and a dynamics residual latent that captures temporal appearance and geometry variation beyond the driving signals. At inference, a learned latent dynamics model evolves the residual latent from a short pose history and the previous latent state. The model decomposes each update into driving, restoring, and dissipative forces, producing temporally coherent, history-dependent rollouts with negligible added cost. Different initial conditions yield diverse yet plausible motion trajectories, and the force decomposition exposes controls such as stiffness. Across nine captured sequences of everyday motion with diverse loose garments, quantitative metrics and a perceptual user study show improved animation quality over recent data-driven baselines.

Graph Network Simulators (GNSs) have emerged as powerful surrogates for complex physics-based simulation, offering inherent differentiability and orders-of-magnitude speedups over traditional solvers. However, GNSs typically assume access to the underlying material parameters, such as stiffness or viscosity, severely limiting their utility in realistic experimental settings. While recent meta-learning approaches address the parameter dependency by inferring properties from mesh trajectories, reconstructing a mesh from an observed scene is challenging. In this work, we introduce Point Cloud Encoding for Accurate Context Handling (PEACH), a novel framework that applies in-context learning on point clouds to adapt a learned simulator to unseen physical properties during inference. Our approach relies on a novel spatio-temporal point cloud sequence encoder, as well as two forms of auxiliary supervision to help improve simulation fidelity. We demonstrate that PEACH is capable of accurate zero-shot sim-to-real transfer on a challenging, dynamic scene. Experiments on simulation scenes show that PEACH even outperforms mesh-based baselines on prediction accuracy, while being much more practical for real-world deployment.

Recent advances in garment simulation have brought high-quality results closer to real-time performance. Physics-based simulators can produce accurate motion, but remain too computationally expensive for interactive applications. In contrast, linear blend skinning is efficient, but cannot capture the complex dynamics of loose-fitting garments, often leading to unrealistic motion and visual artifacts. Neural methods offer a promising alternative, yet they still struggle to animate loose clothing plausibly under strict runtime constraints. We present a fast and physically plausible approach for dynamic garment simulation. Our method trains a reduced-space neural dynamics simulator composed of independent coarse- and fine-level components. At the coarse level, the garment is driven by a set of virtual bones integrated with a lightweight neural network. Fine-scale wrinkle details are then recovered using a trained convolutional neural map. By decoupling identity-specific computation from real-time neural integration, our architecture maintains high performance while supporting diverse body shapes and motions. We further introduce an effective physics-supervision scheme that enables accurate results without relying on an external simulator. Experiments show that our method produces physically plausible garment dynamics, generalizes across a range of motions and body shapes, and supports a fixed set of garments. Our simulator runs at 300+ FPS on a commodity GPU, making it suitable for real-time applications.

Reconstructing simulation-ready deformable objects is important for vision, graphics, and robotics. Existing physics-driven methods can recover physical digital twins from videos, but they suffer from two fundamental limitations: they typically assume a homogeneous material across the whole object, and their scene-specific inverse optimization, combined with the inherent ambiguity of monocular observation, yields inconsistent parameters for the same material across different scenes or interactions. We propose MatPhys, a material-aware feed-forward framework that predicts spring-mass parameters from a single-view video, addressing these two issues with two coupled designs. To relax the homogeneous material assumption, we use DINO features to decompose the object into semantically meaningful parts and to query a part-level material prior, assigning each part its own physical behavior. To enforce cross-scene consistency, we introduce a learned material codebook of shared material embeddings as the bridge between appearance and physics, and further use the part-level prior as a reference distribution that constrains the decoder so that the same material yields consistent parameters across scenes and interactions. Together, these designs turn an under-constrained monocular problem into feed-forward inference grounded on shared, reusable material concepts. Experiments show that our method matches per-scene optimization baselines in reconstruction and future prediction, while achieving stronger generalization to unseen interactions and objects with more consistent physical parameters.