Humanoid Robotics

Foot forward kinematics (FK) is widely used to improve proprioceptive legged odometry by providing reliable velocity constraints during foot support. Existing contact-aided estimators generally rely on binary contact decisions to determine whether the FK measurements of an entire foot should be trusted. However, contact does not necessarily imply FK reliability. Dynamic locomotion often involves partial support, toe dragging, and foot slip, causing binary contact decisions to accumulate significant drift over long trajectories. To address this limitation, we propose FOCUS (Foot Observation Confidence from Unannotated Simulation), which predicts a continuous FK reliability weight for each foot instead of estimating binary foot contact. Rather than replacing the model-based estimator, the predicted reliability weights are used to blend FK velocity observations with IMU-propagated body velocity and to adapt the observation covariance of an extended Kalman filter (EKF), enabling smooth reliability-aware fusion without hard contact switching. The network is trained from automatically generated simulation signals using an FK-weighted velocity consistency loss with lightweight simulator-contact regularization, without manually annotated continuous FK-reliability labels. The deployed model relies only on IMU and joint kinematic measurements, making it suitable for hardware platforms with unreliable torque sensing. Experiments demonstrate that FOCUS reduces absolute trajectory error (ATE) by 83.7% on simulated walking episodes, preserves simulated dynamic-motion fidelity in motion scale and spectral energy, reduces ATE by 70.8% across 19 real walking segments, and reduces mean ATE by 42.7% across four real dynamic-motion routines.

Humanoid learning increasingly relies on transforming vast and diverse human motion data into high-quality robot reference trajectories. However, retargeting human motion to humanoid robots is challenging due to substantial differences in morphology, degrees of freedom, joint ranges, and kinematic constraints between humans and robots. Existing retargeting methods typically address these differences by defining human-robot correspondence through hand-crafted sparse keypoints or body-part pairs. As a result, retargeting quality depends heavily on manual semantic design, limiting scalability across motion sources and robot morphologies and providing only sparse guidance for reproducing detailed poses and interactions. In this paper, we present Unified Motion Retargeting (UMR), a framework that learns dense point cloud correspondence without requiring manually designed human-robot mappings. By treating exterior point clouds as a unified interface between human motion and humanoid robots, UMR decouples retargeting from source-specific skeletal semantics and robot-specific topology. The learned dense correspondence provides fine-grained geometric anchors for constrained point cloud matching optimization, enabling surface-level pose alignment and direct transfer of interaction contacts. Experiments demonstrate that UMR unifies retargeting across heterogeneous motion sources, robot embodiments, and downstream scenarios ranging from locomotion to interaction, while achieving higher motion fidelity and plausibility than state-of-the-art methods. UMR therefore provides a scalable foundation for transforming large-scale human motion references into robot-ready training data.

To improve torque capacity and energy efficiency of humanoid ankles, this paper proposes a 2-DoF parallel elastic actuator (PEA). The main novelty of the proposed design lies in its dual-cam, single-gas-spring architecture, which enables torque compensation in both pitch and roll using a shared elastic element, thereby improving structural compactness compared with conventional multi-element compensation schemes. By leveraging parallel gas springs and customized cam modules, the proposed architecture provides dual-axis torque assistance tailored to specific task requirements. The second key contribution is the formulation of a coupled 2-DoF mathematical model that explicitly captures the interdependence between the two compensation units through the shared spring. Based on this model, an optimization-based design framework is developed to synthesize customized cam profiles from prescribed torque references, establishing a systematic link from task requirements to hardware realization. The complete lower-leg CAD integration is presented in detail. Static FEA and kinematic simulations confirm the design's feasibility and torque-relief effectiveness. The results highlight the proposed design as a compact, customizable solution for 2-DoF humanoid ankle torque compensation.

Traversing sparse 3D structures requires humanoid robots to perceive thin, overhanging geometry while executing agile, accurate whole-body motions. We study this problem through monkey-bar traversal, where the robot must jump to the structure, traverse it through sparse bar interactions, and land safely. For this task, we present a reinforcement-learning-based perceptive control system that operates directly on observations from a head-mounted solid-state lidar. To extract task-relevant geometry from the sparse returns, the policy consumes the raw lidar scan through an attention-based encoder with recurrent memory. This policy is obtained by a phase-scheduled teacher- student pipeline that combines privileged experts for jumping up, brachiating, and jumping down. For transfer to hardware, we model lidar noise, battery-voltage sag, and actuator thermal limits, and equip the humanoid with passive hook end-effectors for robust bar interaction. On hardware, the resulting policy completes the full jump-up->brachiation->jump-down sequence in 14 of 15 trials across three bar configurations and reaches brachiation speeds up to 0.5 m/s. Beyond brachiation, the same perception backbone supports a separately trained policy that ducks beneath thin overhead obstacles with 2 cm cross-sections.

People read a humanoid robot's motion in social settings not only for the action performed but for the affect conveyed. Motion carrying that affect has so far been generated for human avatars, where style is taken from a reference clip or an emotion word, neither of which can be quantitatively parameterized. We present PAMoR, which turns affect into a measured control parameter: a valence-arousal (V-A) coordinate computed natively on robot kinematics. It is obtained in closed form from postural expansion and movement energy, and these measurements serve directly as generation conditions, with no human annotation. An action prior and two affect priors, trained in a shared latent space, are composed at each denoising step: the action prior fixes what is performed, the affect priors modulate how. Whole-body motion rolls out autoregressively on a 29-DoF Unitree G1 in real time, with action and affect both editable. Generated motion tracks the commanded V-A over its full range while text-to-motion fidelity still matches text-only baselines. In a perceptual study, raters identify the commanded emotion on 0.38 of trials, above both baselines and approaching the 0.44 reported for acted human bodies.

Humanoid intelligence requires learning over an extremely diverse space of whole-body motions and physically grounded interactions. However, existing embodied datasets remain fundamentally limited: internet-scale video data lack precise physical states and interaction grounding, while laboratory motion datasets provide high fidelity but only narrow behavioral coverage. This mismatch creates a critical bottleneck for scalable humanoid policy learning. We present HiPHI, a 600+ hour scale high-fidelity whole-body human motion dataset designed to systematically maximize coverage of the human motion and interaction manifold. HiPHI is theoretically guided by FrameNet, a linguistic framework organizing human primitives. Created using an optical motion capture pipeline, HiPHI provides sub-millimeter spatial marker tracking accuracy for full-body human motion and mesh-level object trajectories. We further introduce a benchmark suite evaluating motion-space diversity, interaction grounding, object consistency, and physical AI applications. Our analyses demonstrate that HiPHI significantly expands motion coverage compared to existing motion datasets while maintaining high-fidelity interaction quality, and establishes a scalable data foundation for training, evaluating, and generalizing humanoid policies in real-world embodied tasks, where similar extensions are also applicable to motion prior models in computer graphics. Project page: https://noitom-robotics.github.io/hiphi/

Vision-language-action (VLA) policies are expected to operate robustly across variations in the robot's initial configuration, yet aggregate task success can conceal pose-specific failures and inappropriate hand selection. This work investigates initial-pose dependence in VLA-based humanoid dual-arm manipulation. We characterize the initial-condition-dependent early hand preference as a policy-induced hand prior and quantify it using HandPriorScore, residual hand bias, and target responsiveness. Evaluations across multiple policies and 17 initial configurations reveal strong initial-pose--policy interactions: the same pose produces substantially different success rates across policies, while a single policy exhibits large performance variation across poses. Specific initial arm configurations can suppress or induce an asymmetric hand preference, with the resulting effect varying in direction and strength across policies. Wrist-camera observations also influence hand selection and task performance. Expanding initial-pose coverage in the training dataset substantially improves robustness, while targeted augmentation around a low-performing configuration increases its success rate. Comparisons across training configurations show that sufficient exposure to the target simulation task is beneficial, whereas the effect of real or auxiliary data depends on pose coverage, simulation ratio, and observation availability. These findings characterize a pose-conditioned hand prior, identify a localized initial arm configuration as a causal handle on hand-selection behavior, and demonstrate how data coverage and training composition affect initial-pose robustness.

Humanoid robots have the potential to perform dexterous manipulation in human environments, yet acquiring diverse and generalizable skills remains costly due to expensive hardware data collection and labor-intensive annotation. Recent advances in video generative models provide a promising opportunity to synthesize rich manipulation experiences from visual observations, but transferring such imagined behaviors into executable whole-body humanoid skills remains largely unexplored. In this work, we present RoboReact, a framework that automatically synthesizes whole-body humanoid manipulation skills from a single egocentric RGB-D observation. RoboReact generates human manipulation videos, extracts geometry-preserving interaction keyframes through depth-aware 3D reconstruction, and retargets them to high-DoF humanoid platforms while preserving hand-object interaction geometry. To bridge the gap between imagined plans and physical execution, RoboReact performs online object-centric re-grounding and leverages a vision-language model-guided refinement loop to adapt skills under geometric mismatch and execution deviations. The refined skills are executed through a whole-body controller, enabling coordinated whole-body manipulation and dexterous interaction. Experiments on real humanoid robots demonstrate that RoboReact generalizes across diverse object configurations and robustly recovers from execution disturbances without requiring teleoperation or human demonstrations. These results highlight the potential of combining generative models, vision-language reasoning, and closed-loop control for scalable humanoid skill acquisition.

Industrial humanoid robots are constrained less by locomotion or manipulation capability than by the immaturity of functional safety certification for legged platforms. The root difficulty is that the safe state of a legged robot is an actively-controlled state, which violates the fail-passive assumption underlying ISO13849-1 / EN60204-1: removing power from a walking biped causes an uncontrolled fall, so classical de-energization is itself a hazard. We term this the fail-passive gap and use a certified external safety chain (light curtain, emergency stop, fail-safe input, fail-safe PLC, and wireless PROFIsafe) as an instrument to locate it precisely: because the external chain is closed and quantifiable with established methods (PFHD, DC, CCF, PL/SILCL), the residual uncertifiable element is pinpointed to the robot-side reaction chain. Using a Siemens fail-safe S7-1500 emergency-stop reference, we show its certifiable Reaction subsystem is contactor-based power removal (Stop Category0)---exactly the element a balancing humanoid cannot have. We deliberately do not claim end-to-end certified PLe / SIL3. We validate the approach on a Unitree G1 EDU pick-and-place cell in a 3m x 1.5m semi-enclosed workspace, and contribute a humanoid-specific analysis of the active safe state (fall-as-hazard, single-support stop bounds, balancing-policy residual risk, ISO13855 separation) and a provenance-labeled timing budget. Hosting an industrial software-defined automation (SDA) controller on the robot, co-located with the balancing policy, moves robot-side PROFINET/PROFIsafe reception onto a standardized IEC~61131-3 interface; because the G1's onboard compute is not safety-rated hardware, this endpoint is not a certified safety runtime, which reinforces rather than resolves the fail-passive gap and localizes it to the SDA-to-balancing-policy interface.

Humanoid motion trackers perform reliably within learned tracking distributions, but falls can move the robot into low-height, contact-rich states from which an advancing command is temporarily unreachable. Tracking-only policies may chase infeasible references, producing rapid, large-amplitude limb corrections that increase risk to the robot and its surroundings. We present StableMimic, a unified tracker trained beyond the nominal tracking distribution. Perturbed resets around multiple human get-up references expose prone, supine, off-balance, and intermediate ground-contact states, shaping structured recovery that returns the robot to the trackable region. Because tracking and recovery occupy markedly different state--action distributions, StableMimic uses dedicated experts for each regime and a proprioceptive gate that continuously blends their actions. A hidden successor-state objective teaches human-reference-shaped recovery without exposing reference identity or phase to the deployed Actor; deployment requires no get-up reference, recovery command, trajectory retrieval, or external policy switch. On the complete retargeted LAFAN1 dance subset, StableMimic achieves the lowest errors on all four tracking metrics among five methods. Across 100 matched push-to-fall trials per method, it recovers in 100/100 and attains the lowest values on six of seven post-fall motion and load measures, supporting improved interaction safety under this protocol. Real Unitree G1 dance and standing-reference deployments qualitatively demonstrate bounded limb motion, autonomous recovery, and command resumption.

Whole-body tactile sensing is a prerequisite for humanoids that operate in contact-rich human environments, but conventional taxel arrays scale poorly with surface area, wiring complexity, and robot-specific curvature. We present a conformal electrical impedance tomography tactile skin fabricated through a geometry-adaptable additive-manufacturing workflow. A flexible conductive TPU layer forms a continuous sensing domain, while contact-induced coupling with conductive patches produces boundary voltage changes that are reconstructed using a one-step Gauss-Newton EIT solver. We first characterize the electromechanical design space of the layered structure and show that low-resistance contact-enhancement patches and a porous conductive TPU sensing layer improve sensitivity while preserving printability. We then validate contact localization on a planar prototype, a curved U-shaped prototype, and a qualitative iCub-face-shaped geometry. The curved sensor achieves a mean localization error of 6 mm over 18 contact positions without supervised post-processing. These results suggest that additively manufactured tomographic skins can reduce the morphology-specific redesign burden for humanoid tactile coverage and provide a practical route toward large-area contact sensing for human-centered deployment.

Humanoid robots, with their human-like shape and multi-tasking capabilities, are well-aligned with human-dominated workplaces, like those in civil and construction engineering, where they could collaborate with human workers or autonomously perform physically demanding and hazardous tasks. Despite this promise, limited research has explored how to endow these robots with the practical capabilities needed to perform construction tasks. To this end, this study proposes a novel perception-and-action system that enables humanoid robots to learn and perform construction tasks from worker demonstrations. This system contains two deep networks: Humanoid-PoseNet, which extracts human postures and translates them into mechanically feasible poses for a humanoid robot; and Humanoid-ActionNet, which learns robot-executable actions based on these translated poses. Experimental results demonstrate that the humanoid robot reliably executed eight construction-related actions, achieving an average motion-tracking error of 82.45 mm MPJPE (Mean Per Joint Position Error). This work provides an early step toward deploying humanoid collaborators in construction.

Unified humanoid policies handle agile whole-body motion, yet stumble on a simple demand: staying balanced on one leg. On our single-leg-balance benchmark, eight released state-of-the-art general policies hold a clean single-leg stance on 0 of 90 test motions; they stay up only by stepping or hopping, recovering from imbalance rather than preventing it. Prevention needs the capture point (xCoM), the center of mass (CoM) extrapolated by its velocity, which has never driven a hardware policy because it requires a base linear velocity no on-board sensor provides; expressed relative to the support foot, that velocity cancels exactly, leaving an observation reconstructible from encoders and IMU alone. We put this first deployable dynamic-CoM observation directly into the actor that runs on hardware, and pair it with a reward library translated term by term from human postural control, under one principle: prevention over repair. Trained by asymmetric FastSAC with a privileged critic and no distillation, the resulting policy, FDDC (First Deployable Dynamic-CoM), holds clean single-leg balance on 86 of 90 held-out motions across nine stratified pose classes and transfers to a real Unitree G1; in ablation, the dynamic-CoM observation is the single largest driver: removing it alone costs 40 points of clean single-leg balance. We release the full stack with the first method-agnostic, reproducible sim2sim benchmark for humanoid single-leg balance, scoring each policy in a simulator distinct from its training one, a step toward turning balance from a per-task trick into a capability the field can measure.

Social robots that rely on large language models for conversation are unable to retain information across sessions. This absence of memory violates social expectations, potentially preventing the formation of persistent relationships. This paper presents a lightweight episodic memory module that integrates vector-based semantic retrieval with an LLM-controlled dialog system, deployed on the humanoid robot head Kim. The module employs a hybrid scoring function combining cosine similarity with a memory strength metric to retrieve contextually relevant past interactions and inject them into the generation prompt. The system was evaluated in a within-subjects video-based online study (N = 43) using the Human-Robot Interaction Evaluation Scale (HRIES). Results show that episodic memory significantly increased perceived sociability (d = 0.60, p < .001), with the strongest effects on perceived trustworthiness (d = 0.62) and warmth (d = 0.56). Perceived disturbance remained unchanged (d = 0.00), indicating that the implemented approach to personalized recall did not trigger privacy-related discomfort or uncanny valley effects. These findings suggest that episodic memory serves as a social lubricant in embodied Human-Robot Interaction, enhancing relational quality without eliciting negative affective responses.

Previous research has shown that a human-like robot's acceptance heavily depends on the setting in which it operates and its ability to perform relevant tasks. This paper, first, reports on how our robot processes natural language to generate a multimodal, verbal response integrating emotional expressions based on an emotion simulation backend. Then, it describes how visitors were invited to speak with our robot in their own language at three different, public locations, where the robot was running continuously for several days. The TAM2 questionnaire results reveal that on average users were motivated to use the robot and found it rather useful and easy to use regardless of the specific location. However, public spaces like the tourist information and the city library seem to be a better fit for our interactive, robotic head than an office environment such as the building authority, where the willingness to interact was lower. Overall, the robot's multi-lingual responses were very much appreciated, but every fifth user found the response time too slow impeding the dialog flow, which remains to be improved in future work.

Full-sized humanoid robot capabilities have grown exponentially in recent years, aiming towards general-purpose deployment in human environments. A popular control method used by manufacturers utilizes Virtual Reality for upper-body teleoperation and Reinforcement Learning for lower-body balance and locomotion control. As a result, a single remote operator can see, manipulate, and navigate about a real, distant physical environment. This powerful control stack is often relegated to expensive full-sized robots, many of which are inaccessible to the research community. Miniature humanoids are more prevalent, but employ less biomimicry in their design (e.g. fewer sensors, Degrees of Freedom, etc) and lack similar developments. This paper describes a compliant full-body telepresence control stack developed from the ground up for miniature humanoids. Framework experimentation on ROBOTIS OP3 hardware showcases walking at speeds up to 0.45 m/s independent of arm motions. Tele-loco-manipulation is demonstrated via a cube relocation experiment with an expert human operator. On average, the teleoperated system moved 2 different 40 g cubes within 10 mins, walking a total distance of 5 m. Overall, the developed system shows potential for miniature humanoid tele-loco-manipulation.

The human-like morphology of humanoid robots grants them exceptional potential for agile and versatile motor capabilities, but it also introduces significant challenges in acquiring complex skills. Traditional Learning-from-Demonstrations methods are often constrained by the high cost of collecting real-world data, the difficulty of capturing motion-specific behaviors, and the limited diversity of demonstrations across individuals. Moreover, even for the same task, humans may execute the motion in multiple distinct ways. In this paper, we propose a new framework that leverages the power of Generative AI to convert textual prompts into realistic and diverse sequences of human body movements, enabling the robot to observe multiple variations of how a single task can be performed. These synthetic demonstrations are then used as a training resource, allowing the robot to learn a broad range of task-execution styles without requiring direct human intervention. We evaluate the proposed method across four simulation scenarios. Experimental results show that the robot not only completes the tasks successfully but also demonstrates strong adaptability to complex variations in motion.

Seamless human-robot interaction (HRI) requires a number of perceptual and motor abilities from the robot, one of them being the imitation of human gestures. Humanoid robots have an advantage in HRI thanks to their anthropomorphic features. In this work, we develop a system for imitation of human arm gestures by the semi-humanoid robot NICO based on analytical geometry and a pretrained MediaPipe pose-estimation model. For each input RGB frame, 3D coordinates of relevant human body landmarks, including arm joints and hand keypoints, are obtained using the MediaPipe framework. Joint angles are then computed from these coordinates using derived geometric relations. Finally, the computed angles are properly mapped to NICO's motor configuration and executed in a predefined motion sequence. Preliminary experiments on several representative arm gestures with six participants of different height indicate that the proposed method can produce meaningful imitative motions from monocular RGB input only, while also highlighting limitations in more complex poses and wrist-related movements.

Recent sign language generation (SLG) systems increasingly output dense 3D body representations, which better preserve full-body kinematics and geometry for downstream embodiment on humanoid robots. However, these generated motions frequently exhibit self-intersections such as hand-hand and hand-torso penetration. While such artifacts may be tolerated in offline rendering, they become critical in humanoid execution as they lead to infeasible inverse-kinematics (IK) solutions, collisions, and unstable retargeted trajectories. We present a system-level framework that bridges SLG outputs to humanoid joint-space execution via two components. First, we introduce a volumetric SMPL-X collision-mitigation module that projects generated signing motions toward physically plausible configurations while minimally deviating from the original trajectory. Second, we propose a vision-language-guided retargeting algorithm built on an IK backbone: a VLM serves as a visual critic over rendered humanoid motion, identifies embodiment-specific failure modes, and triggers targeted task-space corrections. Our results highlight collision handling and perception-guided refinement as key missing components for reliable humanoid signing.

Humanoid robots have become increasingly popular in applications such as social interaction, education, and service roles, which drives the need for more natural and efficient human-robot interactions. However, currently available humanoid heads often face limitations, including high costs, mechanical complexity, and limited adaptability across diverse environments. To address these challenges, we present an articulated humanoid robot head designed for a receptionist role, integrating a mechanical structure with 21 degrees of freedom (DoF), including mechanisms for the mouth, eyes, eyebrows, and neck, and covered with realistic silicone skin to achieve a human-like appearance and expression. The system integrates a model-based architecture that combines SCRFD, ArcFace, and ByTetrack for face recognition and Llama and Whisper for natural language processing, with hardware support enabling real-time operations and human re-identification. The conversational ability and re-identification capabilities of the humanoid robot head were quantitatively measured, while its emotional expressiveness and human likeness were evaluated through a user study, achieving an average human likeness score of 4.13 out of 5.

Dexterous hands and humanoid robots are typically developed as distinct embodiments: the former enable contact-rich manipulation at the object scale, whereas the latter provide mobility and whole-body interaction in human-centered environments. We introduce \textbf{Handroid}, a desktop-scale dual-embodiment robot that integrates both capabilities within a single reconfigurable platform. Handroid reuses one 27-DoF electromechanical body as either a dexterous hand or a desktop humanoid, measuring 0.33 m in height and 2.05 kg in weight. In the dexterous hand embodiment, 20 DoFs form an anthropomorphic hand closely matching the kinematic structure of the human hand. In the humanoid embodiment, the same articulated modules are reconfigured into a humanoid with a head, arms, and legs, including a 12-DoF lower-limb structure for locomotion and whole-body motion. Handroid further provides a unified control and learning framework supporting hand teleoperation, dexterous grasping, in-hand manipulation, humanoid locomotion, gait generation, and interactive motion authoring. We validate the platform through real-world dexterous manipulation, reinforcement-learning-based locomotion, keyframe motion deployment, and a long-horizon task involving embodiment reconfiguration, locomotion, docking, and dexterous pick-and-place. These results position Handroid as a compact and reproducible platform for advancing morphology-reconfigurable robotics and cross-embodiment robot learning.

Equipping humanoid robots with coherent and adaptable personas is crucial for fostering natural, engaging, and trustworthy human-robot interaction (HRI). However, existing approaches often rely on static, hard-coded identities that lack the flexibility to adapt to individual user contexts. In this paper, we present PACE (Persona Adaptation through Conversational Elicitation), a novel framework for the interactive generation and deployment of structured personas on the Ameca humanoid robot. Our system introduces an Interactive Persona Elicitation Pipeline, enabling the robot to dynamically synthesize a tailored, psychologically grounded identity through user Q&A. This elicitation process feeds into a persona prompt compilation phase, generating a structured persona prompt built upon multi-perspective dimensions. We detail the Embodied System Integration required to translate this structured specification into expressive, multimodal humanoid behaviors. Through a comprehensive empirical HRI evaluation, we assess the impact of dynamically generated personas on user trust, perceived anthropomorphism, persona consistency, personal relevance, and interaction quality compared to a generic baseline. These contributions establish a scalable pathway for deploying personalized, interactive, and reliable identities in embodied humanoid assistants. Video demo is available at: https://lipzh5.github.io/PACE/

Tactile sensing for social-physical human-robot interaction (spHRI) is designed in a hardware-driven manner, where predefined sensor configurations constrain coverage, spatial resolution, and the range of recognizable gestures. We propose a requirement-driven framework that derives sensing requirements, specifically spatial resolution and placement, directly from interaction data. Using a VR-based platform with haptic feedback, we collected high-resolution whole-body contact distributions across multiple social scenarios, from which we identified nine recurring social touch gestures. Eight gestures were selected for controlled data collection with 18 participants, yielding an open-source dataset of 5,520 trials. Analysis of contact distributions and simulated tactile encodings provides quantitative baselines for skin coverage and sensor density on a humanoid robot platform. While demonstrated on a single robot platform, the methodology is designed to be transferable to other robot morphologies, potentially enabling morphology-specific sensing requirements to be derived prior to hardware fabrication.

Animatronic faces are a central component of socially interactive robots, enabling rich nonverbal communication through facial articulation. However, state-of-the-art animatronic faces are typically tailored systems: each new facial geometry requires extensive manual mechanical redesign, making large-scale personalization prohibitively slow and costly. In this work, we pursue automated and scalable mechanical face synthesis, aiming to rapidly generate a physically realizable facial mechanism for a wide range of facial geometries. We introduce a parametric, linkage-driven mechanical face template whose topology and actuator layout are explicitly parameterized to support systematic scaling and retargeting across diverse facial morphologies. Building on this template, we propose a hierarchical automatic design algorithm that takes a single 2D portrait as input, reconstructs a target 3D face, and synthesizes a collision-free, manufacturable internal mechanism. The algorithm combines anatomy-guided feasible motion volumes, Action Unit (AU)-derived trajectory-based expressiveness objectives, and a collision-driven outer-loop refinement strategy. Beyond hardware synthesis, we argue that future mechanical faces deployed at scale must engage in bidirectional, multi-turn conversation rather than functioning solely as speaking or listening heads. To this end, we develop a dual-identity conversational facial motion synthesis framework that jointly models speaking and listening behaviors from audio, producing temporally coherent 3D facial motion suitable for physical execution. We validate our system through extensive experiments, including (i) quantitative evaluation of automatic mechanism synthesis across diverse facial geometries, (ii) comparisons against manual mechanical design, (iii) benchmarks on conversational facial motion synthesis and real-time deployment, and (iv) perceptual user studies.

The shortage of healthcare staff is a challenge in geriatric care. To address this, robots can be integrated into care settings to provide assistance and emotional support. A promising application is walking guidance, particularly benefiting older adults as navigation skills deteriorate with aging. As walking guidance involves direct contact, the aim of this study is to understand how older adults perceive and respond to different touch modes during guided walking. 24 older adults (68 - 88 yrs.) walked four times a ten-meter trajectory guided by the robot TIAGo Pro in four contact conditions: no physical contact (NC); physical contact through holding the robot's wrist with the hand (HH); physical interaction through linking arms with the robot (LA); and physical contact through resting the forearm on the robots forearm (FC). A multimodal assessment approach included electrocardiogram, electrodermal activity, contact force, distance to robot, and questionnaires. Physiological results reveal a slight increase in stress levels during robot interaction. Behavioural and subjective measures, however, show overall acceptance of robotic touch. The two conditions corresponding to larger interaction forces (HH and FC) were associated with lower relative distances between participant and robot, indicating a higher trust and confidence. Questionnaire responses supported these findings, evidencing greater perceived safety, trust and comfort in these conditions. This study provides insights for the design of robotic walking guidance assistance, indicating that gentle, stable touch is preferred by older adults in comparison to contactless interaction.

Keypoint tracking alone is insufficient for object interaction tasks such as sitting on a chair, wiping a board, or pushing furniture, where the robot can reach the correct pose without making meaningful physical contact with the object. We present CONTACTMIMIC, a learning framework that tracks explicit partlevel binary contact commands alongside keypoint trajectories. CONTACTMIMIC is made possible through the use of contact-following rewards and a trajectory augmentation scheme aimed at breaking the correlations between keypoint trajectories and contact labels. The resulting policy successfully decouples contact behavior from keypoint geometry, and achieves precise physical contact as well as contact-controllability (produce or suppress contact during deployment as desired). Simulation experiments across 10 diverse human-object interaction motions confirm that CONTACTMIMIC exhibits contact controllability that enables it to complete manipulation tasks without task-specific rewards, while also outperforming keypoint-only trackers on contact-relevant tasks. Ablations confirm the necessity of the proposed trajectory augmentation scheme and sim2real deployment validates contact controllability in the real world across 5 different motions. Video results are available on https://lixinyao11.github.io/contactmimic-page/.

Recent advances in actuation, control and learning have rapidly pushed humanoid robots from a distant vision towards near-term real-world deployment. Healthcare is a particularly pressing domain, in which staffing shortages and increasing care demand are widening the gap between clinical workload and available skilled labour. Although current automation has largely focused on digital and logistical tasks, much hospital work remains embodied, requiring mobility, manipulation and safe interaction in human-designed environments. Humanoid form factors offer unique potential, particularly for assisting with surgical tasks. Traditionally, robotic systems for surgery are purpose-built platforms such as Intuitive Surgical's da Vinci Surgical System, and it remains unclear how close current humanoid systems are to meeting the precision, control and safety requirements of minimally invasive surgery. Here we present a systematic evaluation of contemporary humanoid technology for laparoscopic surgical tasks. We develop a humanoid-based laparoscopic teleoperation framework using general-purpose instruments and assess its abilities through benchtop characterization, dry-laboratory user studies spanning diverse surgical experience levels and in vivo porcine studies. Across these evaluations, we quantify technical feasibility, task performance and clinical readiness relative to established surgical platforms. Together, our study provides an evidence-based assessment of current humanoid abilities and limitations for surgical applications, highlighting both their promise and key technical challenges that must be addressed before clinical deployment.

Safety for generalist robots is usually discussed in terms of motion or dialogue. We argue a third question is missing: should the robot take its first hard-to-undo social action at all, such as a greeting, an uninvited grasp, or stepping into someone's space? We call this initiation authorization. Current frameworks rarely treat it as a separate safety layer. Today's stacks often skip this step: a high engagement score or a confident VLA rollout is treated as permission to act. But seeing a person is not the same as having their consent to be addressed. We frame initiation authorization within generalist-robot safety and contrast it with post-plan VLA guardrails, implementing PAS (probe-authorize-speak) on a doorway humanoid, comparing it with direct-init on logged traces, and proposing a three-condition user study, with open questions on metrics, governance, and where initiation ends and foundation-model generation begins.

Nonverbal communication through head and neck movement is fundamental to human social signalling, yet how robotic neck morphology translates motion into communicative information remains poorly understood. We present an information-theoretic framework characterising robot neck movement as a communication channel, quantifying information transmitted and energy expended across varied configurations. Using a robotic neck platform, we recorded 84 video stimuli spanning three rotational degrees of freedom (DoF), varying amplitude, acceleration, and frequency, measuring Shannon entropy of pixel-change signals alongside energy consumption. A perceptual study validated communicative interpretations of each motion. While humans typically engage one axis per gesture, robots are unconstrained by biological architecture, motivating tests up to 3 DoF. Yet communicative information peaks at two DoF and decreases at three despite rising energy cost, a phenomenon we term the morphological information bottleneck. Motion parameter effects were parameter-dependent, some additive, others non-linear. We introduce the Motor Information Space, a framework mapping entropy against energy to expose communicative efficiency across morphologies, in which the optimal configuration achieves 5.26 bits at competitive energy cost. Perception data further confirm multi-axis movements reduce clarity. These findings challenge the assumption that anatomical completeness improves robotic expressiveness, establishing a quantitative basis for morphological design in robots, especially humanoids.

Humanoid robots are increasingly expected to perform contact-rich tasks that require not only accurate whole-body motion but also robust physical interaction with surrounding objects and humans. Although recent advances in humanoid motion imitation and whole-body control have achieved remarkable tracking performance, existing datasets and benchmarks primarily focus on kinematic motion while largely overlooking synchronized interaction forces. As a result, current evaluations fail to capture how external interaction forces affect tracking accuracy, stability, and control robustness. In this paper, we present ThorArena, a benchmark for evaluating force-aware humanoid interaction based on human demonstrations with synchronized motion and force measurements. We collect a real-world interaction dataset that simultaneously captures whole-body human motion and forces exerted by both hands across six representative physical interaction tasks. Based on these demonstrations, we propose force-aware evaluation metrics that jointly assess whole-body tracking accuracy, robustness under different force levels, control effort, and episode survival through the Force-Aware Tracking Score (FATS) and complementary diagnostic metrics. We further establish a unified benchmark protocol that replays recorded interaction forces in simulation and provides a standardized evaluation interface for different humanoid control policies. Experiments on representative whole-body control policies demonstrate that force-aware evaluation reveals substantial performance differences that remain largely hidden under conventional no-force evaluation. ThorArena provides a practical and reproducible framework for studying force-aware humanoid interaction and offers a new benchmark for evaluating contact-rich humanoid behaviors.