Multi-Uav Systems

Uncrewed aerial vehicles (UAVs) are increasingly deployed in complex networked environments, yet the joint optimization of multi-UAV motion control and connectivity remains a fundamental challenge. In this paper, we study a multi-UAV system operating in an integrated terrestrial and non-terrestrial network (ITNTN) comprising terrestrial base stations and high-altitude platform stations (HAPS). We consider a three-dimensional (3D) aerial highway scenario where UAVs must adapt their motion to ensure collision avoidance, efficient traffic flow, and reliable communication under dynamic and partially observable conditions. We first model the problem as a hierarchical multi-objective partially observable Markov decision process (H-MO-POMDP), capturing the coupling between control and communication objectives. Based on this formulation, we propose a large language model (LLM)-driven hierarchical multi-rate control framework. At the global level, an LLM-based controller on the HAPS performs long-term planning for load balancing and handover decisions. At the local level, each UAV employs a hybrid controller that integrates a slow-timescale LLM for high-level spatial reasoning with a reinforcement learning agent for faster UAV-to-infrastructure (U2I) communication and motion control. We further develop a high-fidelity 3D simulation platform by integrating the gym-pybullet-drones environment with 3GPP-compliant RF/THz channel models. Numerical results demonstrate that the proposed framework significantly outperforms state-of-the-art baselines, achieving a 14% increase in transportation efficiency and a 25% improvement in telecommunication throughput. Additionally, it achieves a 23% reduction in physical collision rates, demonstrating strong handover stability and zero-shot generalization in dynamic scenarios.

Abrupt cable severance in multi-UAV slung-load transport redistributes load and changes the active constraint set, leaving limited time for fault diagnosis and reconfiguration. Existing controllers rely on coordinated force allocation, peer-state exchange, or fixed cable topology, and therefore lack a certified decentralized recovery mechanism for unannounced severance. We present a passive architecture that routes each vehicle's measured cable tension directly into its altitude thrust command, $T_i^{\mathrm{ff}}=T_i$, while a surrounding proportional-derivative, anti-swing, and projection cascade preserves local tracking feasibility. The main contribution is a conditional hybrid practical input-to-state-stability certificate that composes a slack-excursion-bounded taut-cable reduction, bounded post-severance Lyapunov jumps, inter-fault decay, and per-fault-cycle contraction $ρ\in (0,1)$ into an explicit recovery envelope under stated actuator, slack, and dwell assumptions. We validate the controller in Drake multibody simulation with five vehicles, a 10 kg payload, Kelvin-Voigt cables, Dryden wind, and single- and dual-severance schedules: the closed loop attains 0.312-0.328 m RMSE, 76.1-95.2 mm peak sag, and recovery within one payload-pendulum period. Disabling the identity inflates cruise error by 34-39% and peak sag by 3.6x-4.0x, identifying local tension feed-forward as the dominant passive recovery mechanism in the tested decentralized cascade.

This paper investigates a multi-Unmanned Aerial Vehicle (UAV) joint base station-assisted Internet of Vehicles (IoV) task offloading system in dense urban environments. To minimize system delay and energy consumption under strict coupling constraints, the complex non-convex optimization problem is decoupled into a hierarchical execution framework. First, a sequential distributed optimization algorithm based on Second-Order Cone Programming (SOCP) is proposed to optimize the 3D flight trajectory of each UAV, ensuring adaptive network coverage. Second, a novel hybrid resource scheduling paradigm synergizing Deep Reinforcement Learning (DRL) and Large Language Models (LLMs) is developed. Within this framework, the DRL agent dictates the initial resource allocation, while the LLM acts as a semantic macro-scheduler to rectify long-tail allocation imbalances for failed and surplus tasks. Crucially, a reward decoupling mechanism is introduced to isolate DRL training from external LLM interventions, thereby ensuring policy convergence. Finally, the task offloading ratios are precisely determined via Linear Programming (LP) within an alternating optimization loop. Simulation results demonstrate that the proposed method significantly outperforms traditional multi-agent reinforcement learning baselines in terms of task success rate and system efficiency.

Conventional federated learning assumes that greater learner participation improves training performance, by leveraging abundant, independently generated local data. However, in federated reinforcement learning (FRL) for unmanned aerial vehicle (UAV) teams in hazardous environments where experience generation is severely constrained by safety considerations, energy limitations, and mission duration, this assumption may break. This work introduces Experience-Constrained Hierarchical Federated Reinforcement Learning (EC-HFRL), a framework in which clusters act as federated learning agents, while multiple intra-cluster learners represent parallel learning resources that reuse a shared experience pool. We show that increasing participation does not necessarily improve learning performance. Instead, learning performance is strongly associated with experience reuse strategy and the dominance of key analytically identified gradient transition experiences within a cluster. In particular, minibatch size primarily determines effective replay exposure, while higher intra-cluster participation increases reuse level. Empirical results demonstrate that the performance regimes are strongly associated with the structure of the learning signal, rather than federated aggregation effects, clarifying the limited and secondary role of learner participation in experience-constrained FRL.

This paper presents an expert-guided active-inference-inspired framework for adaptive UAV swarm trajectory planning. The proposed method converts multi-UAV trajectory design from a repeated combinatorial optimization problem into a hierarchical probabilistic inference problem. In the offline phase, a genetic-algorithm planner with repulsive-force collision avoidance (GA--RF) generates expert demonstrations, which are abstracted into Mission, Route, and Motion dictionaries. These dictionaries are used to learn a probabilistic world model that captures how expert mission allocations induce route orders and how route orders induce motion-level behaviors. During online operation, the UAV swarm evaluates candidate actions by forming posterior beliefs over symbolic states and minimizing KL-divergence-based abnormality indicators with respect to expert-derived reference distributions. This enables mission allocation, route insertion, motion adaptation, and collision-aware replanning without rerunning the offline optimizer. Bayesian state estimators, including EKF and PF modules, are integrated at the motion level to improve trajectory correction under uncertainty. Simulation results show that the proposed framework preserves expert-like planning structure while producing smoother and more stable behavior than modified Q-learning. Additional validation using real-flight UAV trajectory data demonstrates that the learned world model can correct symbolic predictions under noisy and non-smooth observations, supporting its applicability to adaptive UAV swarm autonomy.

This paper addresses the problem of traffic congestion management in fixed-wing unmanned aerial vehicle (UAV) corridors by further developing a recently introduced loiter-lane framework. A semi-cooperative guidance strategy is developed for inserting fixed-wing UAVs into a loiter lane with minimal disruption to the UAVs already operating within it, while enabling a more compact fixed-wing UAV corridor. Building on the concepts of cooperative and non-disruptive loiter-lane insertion, the proposed strategy makes the incoming UAV first attempt, within its speed bounds, to rendezvous with an existing empty loiter slot. If direct insertion is infeasible, a minimal number of loitering UAVs perform coordinated slot hopping to create a suitably positioned empty slot. The feasibility and performance of the method are demonstrated through numerical simulations.

We study cooperative shortest path planning for an unmanned ground vehicle (UGV) assisted by an unmanned aerial vehicle (UAV) scout in environments with unknown road blockages that are only discovered when a robot reaches the damaged point. This formulation generalizes the original Canadian Traveller Problem (CTP), which assumes a single ground vehicle and that the traversability status of all incident edges is revealed upon arrival at a vertex. We first analyze the case where the start and the goal are connected by $k$ disjoint paths, and prove that the worst-case competitive ratio $ρ$ for a single UGV is $2k-1$. With UAV assistance, and under the simplifying assumption of negligible initial transit and deadheading UAV costs, the ratio $ρ$ improves to $2(k-1)\frac{v_G}{v_G + v_A} + 1$, where $v_G$ and $v_A$ denote the UGV and UAV speed, respectively. To address general graphs and non-negligible UAV initial transit and deadheading costs, we present an optimal candidate-path partitioning algorithm that assigns path prefix inspection to the UGV and path suffix inspection to the UAV, and prove the optimality of the UAV inspection strategy on general graphs. We evaluate our algorithm by performing experiments on road networks from the world's 50 most populous cities with randomized blockage locations, and show that the algorithm reduces UGV travel time, with larger improvements as the UAV speed increases.

This paper addresses the Dynamic UGV-UAV Cooperative Path Planning (DUCPP) problem involving one unmanned ground vehicle (UGV) assisted by one or more unmanned aerial vehicles (UAVs) operating on an uncertain road network with potentially impassable edges. DUCPP is particularly relevant for scenarios such as disaster response, emergency supply transport, and rescue operations, where a UGV must reach a specified destination in the presence of partially unknown road conditions. To enable the UGV to travel safely and efficiently to its destination, the UAV(s) dynamically inspect edges in the environment to identify and prune damaged or impassable edges from consideration. We present multiple strategies, including a bidirectional approach, to optimize UGV-UAV cooperation for finding a safe path in an uncertain road network. Furthermore, we explore the impact of using multiple UAVs on reducing the UGV's travel time, and evaluate the associated computation time. The proposed strategies are implemented and evaluated on 100 urban road networks. The results demonstrate that the bidirectional strategy achieves the best performance in most instances, and using multiple UAVs further reduces UGV travel time at the expense of increased computation time. This paper presents a robust framework for DUCPP to achieve efficient UGV-UAV cooperation for path planning and inspection, offering practical solutions for navigation in challenging and uncertain conditions.

Predicting future trajectories of surrounding traffic agents is critical for safe autonomous navigation and collision avoidance. Despite all advances in the trajectory forecasting realm, the prediction models remains vulnerable to uncertainty caused by occlusions, limited sensing range, and perception errors. Collaborative vehicle-to-vehicle (V2V) approaches help reduce this uncertainty by sharing complementary information. Existing collaborative trajectory prediction methods typically fuse feature maps at the perception stage to construct a holistic scene view. Further this holistic representation is decoded into the future trajectories. Such design incurs substantial communication overhead due to the exchange of high-dimensional feature representations and often assumes idealized bandwidth and synchronization, limiting practical deployment. We address these limitations by shifting collaboration from perception to the prediction module and introducing a late-fusion framework for shared forecasts. The framework is model-agnostic and treats collaborating vehicles as independent asynchronous agents. We evaluate the approach on the OPV2V, V2V4Real, and DeepAccident datasets, comparing individual and collaborative forecasting. Across all datasets, late fusion consistently reduces miss rate and improves trajectory success rate ($\mathrm{TSR}_{0.5}$), defined as the fraction of ground-truth agents with final displacement error below 0.5 m. On the real-world V2V4Real dataset, collaborative prediction improves the success rate by $1.69\%$ and $1.22\%$ for both intelligent vehicles, respectively, compared with individual forecasting.

Coordinating the motions of multiple autonomous vehicles (AVs) requires planning frameworks that ensure safety while making efficient use of space and time. This paper presents a new approach, termed variable-time-step spatio-temporal corridor (V-STC), that enhances the temporal efficiency of multi-vehicle coordination. An optimization model is formulated to construct a V-STC for each AV, in which both the spatial configuration of the corridor cubes and their time durations are treated as decision variables. By allowing the corridor's spatial position and time step to vary, the constructed V-STC reduces the overall temporal occupancy of each AV while maintaining collision-free separation in the spatio-temporal domain. Based on the generated V-STC, a dynamically feasible trajectory is then planned independently for each AV. Simulation studies demonstrate that the proposed method achieves safe multi-vehicle coordination and yields more time-efficient motion compared with existing STC approaches.

This paper presents a decentralized, collision-free framework for path following guidance of multiple uncrewed aerial vehicles (UAVs), while maintaining uniform spacing along a reference path. A vector field-based guidance law is employed to drive each UAV toward the reference path. A rotational repulsion mechanism, utilizing relative distance and bearing between UAVs, is proposed to avoid collisions during convergence to the path, and an inter-UAV spacing error-based velocity control law is presented to achieve uniform separation along the path. Analytical guarantees are established for collision avoidance and convergence of the inter-UAV spacing errors to zero, ensuring uniform separation along the path. Numerical simulations demonstrate the efficacy of the proposed method.

Multi-UAV inspection missions require spare drones to replace active drones during recharging cycles. Existing fleet-sizing approaches often assume steady-state operating conditions that do not apply to finite-horizon missions, or they treat replacement requests as statistically independent events. The latter provides per-request blocking guarantees that fail to translate to mission-level reliability when demands cluster. This paper identifies a structural failure mode where efficient routing assigns similar workloads to each UAV, leading to synchronized battery depletion and replacement bursts that exhaust the spare pool even when average capacity is sufficient. We derive a closed-form sufficient fleet-sizing rule, k = m(ceil(R) + 1), where m is the number of active UAVs and R is the recovery-to-active time ratio. This additive buffer of m spares absorbs worst-case synchronized demand at recovery-cycle boundaries and ensures mission-level reliability even when all UAVs deplete simultaneously. Monte Carlo validation across five scenarios (m in [2, 10], R in [0.87, 3.39], 1000 trials each) shows that Erlang-B sizing with a per-request blocking target epsilon = 0.01 drops to 69.9% mission success at R = 3.39, with 95% of spare exhaustion events concentrated in the top-decile 5-minute demand windows. In contrast, the proposed rule maintains 99.8% success (Wilson 95% lower bound 99.3%) across all tested conditions, including wind variability up to CV = 0.30, while requiring only four additional drones in the most demanding scenario.

This paper presents a two-stage trajectory planning framework for a multi-UAV rigid-payload cascaded transportation system, aiming to address planning challenges in densely cluttered environments. In Stage I, an Enhanced Tube-RRT* algorithm is developed by integrating active hybrid sampling and an adaptive expansion strategy, enabling rapid generation of a safe and feasible virtual tube in environments with dense obstacles. Moreover, a trajectory smoothness cost is explicitly incorporated into the edge cost to reduce excessive turns and thereby mitigate cable-induced oscillations. Simulation results demonstrate that the proposed Enhanced Tube-RRT* achieves a higher success rate and effective sampling rate than mixed-sampling Tube-RRT* (STube-RRT*) and adaptive-extension Tube-RRT* (AETube-RRT*), while producing a shorter optimal path with a smaller cumulative turning angle. In Stage II, a convex quadratic program is formulated by considering payload translational and rotational dynamics, cable tension constraints, and collision-safety constraints, yielding a smooth, collision-free desired payload trajectory. Finally, a centralized geometric control scheme is applied to the cascaded system to validate the effectiveness and feasibility of the proposed planning framework, offering a practical solution for payload attitude maneuvering in densely cluttered environments.

In Global Navigation Satellite System (GNSS)-denied underwater environments, individual unmanned underwater vehicles (UUVs) suffer from unbounded dead-reckoning drift, making collaborative navigation (CN) crucial for accurate state estimation. However, the severe communication delay inherent in underwater acoustic channels poses serious challenges to real-time state estimation. Traditional filters, such as Extended Kalman Filters (EKFs) or Unscented Kalman Filters (UKFs), usually block the main control loop while waiting for delayed data, or effectively discard Out-of-Sequence Measurements (OOSMs), resulting in serious drift. To address this, we propose an Asynchronous Two-Speed Kalman Filter (TSKF) enhanced by a novel projection mechanism, which we term Variational History Distillation (VHD). The proposed architecture decouples the estimation process into two parallel threads: a fast-rate thread that utilizes Gaussian Process (GP) compensated dead reckoning to guarantee high-frequency real-time control, and a slow-rate thread dedicated to processing asynchronously delayed collaborative information. By introducing a Finite-Length Circular State Buffer (FLCSB), the algorithm applies delayed measurements to their corresponding historical states, and utilizes a VHD-based projection to fast-forward the correction to the current time without computationally heavy recalculations. Simulation results demonstrate that the proposed TSKF maintains a trajectory error comparable to computationally intensive batch-optimization methods under severe delays (up to 30,s). Executing in sub-millisecond time, it significantly outperforms standard EKF/UKF. The results demonstrate an effective control, communication, and computing (3C) co-design that significantly enhances the resilience of autonomous marine automation systems.

This paper addresses multi-objective conflicts and catastrophic forgetting in uncrewed aerial vehicle (UAV) networks across dynamic spatiotemporal environments. Conventional multi-agent reinforcement learning (MARL) algorithms suffer from severe policy degradation during sequential task transitions. We propose a spatiotemporal continual federated learning (SCFL) framework driven by the group-decoupled multi-agent proximal policy optimization (G-MAPPO) algorithm. SCFL incorporates a three-stage geometric alignment mechanism: it resolves local gradient conflicts via group-decoupled policy optimization (GDPO), mitigates spatial Non-Independent and Identically Distributed (non-IID) client drift through adaptive cosine aggregation, and suppresses inter-task interference via global temporal orthogonal projection without raw experience replay. Evaluations show that SCFL achieves superior robustness over federated baselines, maintaining spatial service reliability above 0.95 and a load balancing index of approximately 0.95 during non-stationary transitions. A longitudinal self-degradation analysis further shows that SCFL preserves historical knowledge with near-zero performance variation in spatial reliability and QoS under moderate loads from 40 to 120 users, while revealing its operating boundary under extreme congestion with 140 users due to hard projection constraints. The framework provides a scalable, communication-efficient approach for autonomous aerial network orchestration.

Cooperative perception through Vehicle-to-Everything (V2X) communication offers significant potential for enhancing vehicle perception by mitigating occlusions and expanding the field of view. However, past research has predominantly focused on improving accuracy metrics without addressing the crucial system-level considerations of efficiency, latency, and real-world deployability. Noticeably, most existing systems rely on full-precision models, which incur high computational and transmission costs, making them impractical for real-time operation in resource-constrained environments. In this paper, we introduce \textbf{QuantV2X}, the first fully quantized multi-agent system designed specifically for efficient and scalable deployment of multi-modal, multi-agent V2X cooperative perception. QuantV2X introduces a unified end-to-end quantization strategy across both neural network models and transmitted message representations that simultaneously reduces computational load and transmission bandwidth. Remarkably, despite operating under low-bit constraints, QuantV2X achieves accuracy comparable to full-precision systems. More importantly, when evaluated under deployment-oriented metrics, QuantV2X reduces system-level latency by 3.2$\times$ and achieves a +9.5 improvement in mAP30 over full-precision baselines. Furthermore, QuantV2X scales more effectively, enabling larger and more capable models to fit within strict memory budgets. These results highlight the viability of a fully quantized multi-agent intermediate fusion system for real-world deployment. The system will be publicly released to promote research in this field: https://github.com/ucla-mobility/QuantV2X.

Urban Air Mobility (UAM) envisions the widespread use of small aerial vehicles to transform transportation in dense urban environments. However, UAM faces critical operational challenges, particularly the balance between minimizing noise exposure and maintaining safe separation in low-altitude urban airspace, two potentially conflicting objectives that are often addressed separately. We propose a reinforcement learning (RL)-based air traffic management system that integrates both noise and safety considerations within a unified, decentralized framework. Under this scalable air traffic coordination solution, agents operate in a structured, multi-layered airspace and learn altitude adjustment policies to jointly manage noise impact and separation constraints. The system demonstrates strong performance across both objectives and reveals tradeoffs among separation, noise exposure, and energy efficiency under high traffic density. Among the three objectives, safe separation is accorded the highest priority, whereas the relative significance of noise and energy varies by location and is contingent upon financial and public policy considerations. The findings highlight the potential of RL and multi-objective coordination strategies in enhancing the safety, quietness, and efficiency of UAM operations.

This paper investigates secure communications in rate-splitting multiple access (RSMA) enabled heterogeneous UAV networks, where multiple UAVs collaboratively serve ground terminals in the presence of eavesdroppers. By jointly considering secrecy rate maximization and propulsion energy consumption minimization, we formulate a multi-objective optimization problem involving UAV trajectory design, service association, power allocation, and secrecy precoding under mobility, collision-avoidance, service-capacity, and communication constraints. The formulated problem is highly non-convex due to the coupling among UAV trajectories, RSMA transmission variables, and secrecy constraints. To address the resulting non-convex and highly coupled optimization problem, we propose a hierarchical optimization framework. The inner layer uses a semidefinite relaxation (SDR)-based S2DC algorithm combining penalty functions and difference-of-convex (D.C.) programming to solve the secrecy precoding problem with fixed UAV positions. The outer layer introduces a Large Language Model (LLM)-guided heuristic multi-agent reinforcement learning approach (LLM-HeMARL) for trajectory optimization. LLM-HeMARL efficiently incorporates LLM-generated expert heuristic policy, enabling UAVs to learn energy-aware, security-driven trajectories without the inference overhead of real-time LLM calls. The simulation results show that our method outperforms existing baselines in secrecy rate and energy efficiency, with consistent robustness across varying UAV swarm sizes and random seeds.