Multimodal Sensor Fusion

Follow this topic Ask about this topic

Momentum

37 papers in the last four weeks, up 131% on the four weeks before. 0.4% of all new papers.

Jul 13Week of Sep 28

Latest papers 275

Jun 19, 2026cs.RO

Online Learning of Robust Legged Odometry with Minimal Exteroceptive Supervision

Robust locomotion and navigation for legged robots relies heavily on dependable odometry. Traditional multi-sensor fusion for such state estimation requires meticulous sensor calibration and platform-specific kinematic modeling, which complicates deployment. Industrially packaged exteroceptive sensors can provide accurate motion tracking but remain vulnerable to perceptually degraded conditions. We thus develop a plug-and-play, robust legged odometry system that eliminates the need for explicit exteroceptive-to-proprioceptive calibration or system kinematic modeling. Our approach leverages established exteroceptive motion pipelines as a continuous supervisory signal to train an online learned velocity neural network directly from proprioceptive data. An Invariant EKF (InEKF) is then used to fuse the learned proprioceptive or exteroceptive velocity (if any) and IMU data. When exteroception fails due to environmental degradation, the system seamlessly falls back to using the learned proprioceptive model, yielding a resilient legged odometry that readily adapts to new hardware. We demonstrate the platform-agnostic, easily deployable nature of our approach on different quadruped platforms, showcasing promising results in maintaining robust motion estimation across challenging scenarios.

Abhijeet M. Kulkarni, Yuze Du, Guoquan Huang

University of Delaware Newark, DE, USA

Robot State Estimation Multimodal Sensor Fusion

Jun 19, 2026cs.RO

Ultra-Fusion: A Resilient Tightly-Coupled Multi-Sensor Fusion SLAM Framework under Sensor Degradation and Spatiotemporal Perturbation for Intelligent Transportation Systems

Reliable localization is essential for intelligent transportation systems (ITS), including autonomous vehicles, quadruped last-mile carriers, and infrastructure-inspection unmanned aerial vehicles (UAVs). Although tightly-coupled multi-sensor fusion improves accuracy in favorable conditions, deployed systems remain vulnerable to sensor degradation -- poor illumination, LiDAR degeneracy, wheel slippage, and GNSS outage -- and to spatiotemporal calibration errors. These failures are common in urban canyons, tunnels, and high-speed corridors, where localization drift can degrade route tracking, tunnel passage continuity, and local map alignment. This paper presents Ultra-Fusion, a tightly-coupled multi-sensor localization framework based on a unified sliding-window estimator. Asynchronous measurements are timestamp-ordered and converted into optional factors within one optimization window, supporting WIO, VIO, LIO, and LVIO with optional wheel and GNSS augmentation. Observability-aware initialization selects the bootstrap mode, factor-wise reliability scheduling gates degraded measurements, and online LiDAR--IMU spatiotemporal calibration refines temporal offsets and rotational extrinsics during operation. We extend the M3DGR benchmark with simulation trajectories and evaluate more than 60 open-source SLAM systems on M3DGR, M2DGR-Plus, KAIST, GrandTour, and MARS-LVIG. The results show competitive accuracy across wheeled, legged, and aerial platforms under long-duration and high-speed operation, degradation, and calibration perturbation, improving localization availability for road-level autonomy, campus and warehouse mobility, and low-altitude aerial inspection. To benefit the industrial and academic community, we will release source code and datasets upon paper acceptance.

Yihong Tian, Junjie Zhang, Liuyang Li +3

Beijing Institute of Technology · Chongqing University · Sichuan University +2

Simultaneous Localization and Mapping Robot Localization Multimodal Sensor Fusion

Jun 19, 2026cs.RO

A UAV-Mounted Sensor Network for Close-Range Inspection of Wind Turbine Rotor Blades

Inspection of offshore wind turbine rotor blades is critical for predictive maintenance to maximise efficiency and extend operational lifetime. However, it remains a challenging task due to remote locations, large structural dimensions, and the limitations of current UAV-compatible sensor systems. While existing approaches can detect certain types of surface anomalies, reliable classification of defect types often remains a manual and error-prone process. This paper presents the design of a UAV-mounted multimodal sensor network combining an industrial RGB camera, a passive thermal infrared camera, and an in-house developed 3D scanner. All sensors are co-calibrated into a common coordinate frame, enabling spatial superimposition of geometric, colour, and thermal data. The system is designed to operate at close range, addressing three fundamental sensing challenges: platform motion, large field of view, and millimetre-level measurement accuracy. Preliminary laboratory results demonstrate synchronised multi-sensor acquisition and initial point cloud reconstructions, forming the basis for future airborne inspection trials.

Jost Wittmann, Ahmed Abdullahi Hassan, Nils Kömpe +1

Department of Computer Science XVII: Robotics Julius-Maximilians Universität Würzburg Würzburg, Germany · Research and Development SubseaScanning AS Stavanger, Norway · Elektronik-Entwicklung Oktopus GmbH Kiel, Germany

Industrial Inspection UAV Remote Sensing Multimodal Sensor Fusion Structural Health Monitoring

Jun 19, 2026cs.CV

Memory-Augmented LSTM Autoencoder for Unsupervised Activity Recognition with IMU Sensor Fusion

HAR using Inertial Measurement Unit (IMU) sensors is vital for healthcare monitoring and rehabilitation. Despite deep learning advancements, major challenges remain: reliance on labeled data, multi-sensor fusion complexity, and the limited ability of unsupervised methods to capture spatiotemporal dependencies. These issues are pronounced in real-world scenarios with noisy data, overlapping activities, and missing labels. We propose a fully unsupervised spatiotemporal feature fusion framework using a memory-augmented autoencoder. It enhances activity representations via short temporal windows of multi-sensor IMU data, enabling real-time applications. Our framework extracts hierarchical static features via a Stacked Autoencoder, fusing them within and across sensors. A sequence-to-sequence LSTM Autoencoder then temporally refines these features, incorporating historical motion patterns without labels. We analyze key hyperparameters to identify configurations that maximize feature separability under short-window constraints. Evaluated on DaLiAc and PAMAP2 using realistic inter-class window segmentation, our method achieves 96.6% and 98.4% accuracy, respectively, surpassing supervised baselines and unsupervised approaches. Our method improves feature separability by up to 9% despite shorter temporal windows. While our realistic inter-class segmentation reduces accuracy by ~7%, it was intentionally adopted to better reflect real-world activity transitions and practical relevance.

Saeid Arabzadeh, Farshad Almasganj, Mohammad Mahdi Ahmadi

Faculty of Biomedical Engineering, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran

Human Activity Recognition Autoencoders Unsupervised Representation Learning Multimodal Sensor Fusion

Jun 19, 2026cs.CV

MS-rPPG: Multi-spectral State Space Model for Remote Photoplethysmography in Driver Monitoring Systems

Remote photoplethysmography (rPPG) is a camera-based technique for measuring physiological signals, particularly cardiac activity. From the remotely measured signals, heart rate can be estimated, which is crucial for health monitoring. In this study, we investigate a driver health monitoring system based on remote heart rate estimation. However, driving environments represent uncontrolled settings where videos are subject to varying illumination conditions and frequent head movements. We introduce MS-rPPG, a multi-spectral framework that combines RGB with near-infrared (NIR) face video to alleviate rPPG estimation under challenging driving conditions. To combine the complementary features from two spectral videos, we propose a cross-spectral linear modulation (CSLM) strategy based on frequency-domain analysis. Moreover, we introduce MS-Mamba, a novel state space model designed to effectively model long-range temporal dependencies while jointly capturing cross-channel interactions between multi-spectral features. We collected a real-world dataset called MS-Drive, which was recorded from 50 participants while driving the vehicle. The proposed method was evaluated on the MR-NIRP Car dataset and MS-Drive datasets. The experimental results indicate that MS-rPPG shows better robustness and heart rate estimation accuracy than previous methods, highlighting its promise for driver health monitoring. The codes are available at github.com/ziiho08/MS-rPPG.

Jiho Choi, Sang Jun Lee

Division of Electronics and Information Engineering, Jeonbuk National University, Republic of Korea

Remote Photoplethysmography Selective SSMs Heart Rate Estimation Driver Monitoring Multimodal Sensor Fusion

Jun 18, 2026cs.RO

LIT-GS: LiDAR-Inertial-Thermal Gaussian Splatting for Illumination-Robust Mapping

Gaussian Splatting has enabled real-time neural rendering, yet existing LiDAR-inertial-visual (LIV) Gaussian mapping pipelines remain fragile under illumination changes and texture-deficient scenes due to their reliance on RGB photometric cues. We present LIT-GS, a LiDAR-inertial-thermal Gaussian Splatting framework that injects LiDAR-derived plane geometry as an explicit constraint in both pose/structure refinement and Gaussian optimization. Specifically, we exploit LIV visual map points as confidence-aware cross-modal anchors to establish reliable thermal-LiDAR associations, and incorporate weighted LiDAR point-to-plane residuals into bundle adjustment to jointly refine camera poses and 3D points under weak thermal supervision. Building on the refined structure, we further introduce a LiDAR-plane-regularized differentiable splatting objective that constrains rendered 3D points to align with locally observed planes, mitigating surface thickening and structural drift in low-contrast thermal imagery. Experiments on proprietary sequences and public datasets demonstrate that LIT-GS consistently improves geometric accuracy and rendering quality over state-of-the-art LIV-based Gaussian Splatting baselines, particularly in challenging lighting conditions.

Shikuan Shi, Chunran Zheng, Jiaming Xu +3

College of Mechatronics and Control Engineering, Shenzhen University, Shenzhen 518060, China · Department of Mechanical Engineering, The University of Hong Kong, Hong Kong SAR, China

Simultaneous Localization and Mapping 3D Gaussian Splatting Camera Pose Estimation Camera-LiDAR Fusion Multimodal Sensor Fusion

Jun 17, 2026cs.CV

ROSA-TFormer: A Radar-Optical Sensor-Aware Temporal Transformer for Pinus sylvestris Plantation Classification in Northern Shaanxi Using GEE-Derived Sentinel-1/2 Time Series

Accurate identification of Pinus sylvestris var. mongolica plantations is important for monitoring afforestation quality and ecological restoration in northern Shaanxi. This paper proposes ROSA-TFormer, a radar-optical sensor-aware temporal Transformer for P. sylvestris classification using Sentinel-1/2 time-series data generated on Google Earth Engine. The model integrates separate SAR and optical embedding branches, a sensor-aware gate, and temporal attention pooling to capture multi-source seasonal features. Experiments on monthly and half-month point-level datasets show that ROSA-TFormer achieves strong classification performance, with 99.67% overall accuracy, 99.56% macro F1, and 98.91% P. sylvestris F1 on the HalfMonth-dataBig dataset. Spatial block validation and ablation results further indicate the effectiveness of radar-optical temporal fusion and sensor-aware modeling. The results demonstrate the potential of ROSA-TFormer for point-level P. sylvestris plantation classification, while broader wall-to-wall validation remains necessary.

Nengbo Zhang, Chang sheng

Key Laboratory of Remote Sensing and Digital Earth, Aerospace Information Research Institute, Chinese Academy of Sciences (AIRCAS), Beijing 100101, China

Time Series Classification Land Cover Classification Tree Species Classification Remote Sensing Time Series Transformers Multimodal Sensor Fusion

Jun 17, 2026cs.RO

FAST-LIVGO: A Degeneracy-Robust LiDAR-Inertial-Visual-GNSS Fusion Odometry

Robust state estimation and mapping in long-term, large-scale, and highly dynamic environments remains a key challenge in robotics. Existing LiDAR-Inertial-Visual Odometry (LIVO) systems achieve strong local accuracy but suffer from accumulated drift over long distances and may fail in geometrically degraded or textureless scenes. Meanwhile, GNSS-aided fusion frameworks often rely on LiDAR or visual odometry for state prediction and outlier rejection, making them vulnerable when odometry degenerates. To address these limitations, we propose a tightly coupled LiDAR-Inertial-Visual-GNSS fusion framework based on an Error-State Iterated Kalman Filter. An online spatiotemporal alignment module using Dynamic Time Warping is introduced for highly dynamic conditions. To better exploit GNSS precision, we develop observation models based on Doppler shifts and fixed-anchor Time-Differenced Carrier Phase, providing millimeter-level relative constraints without augmenting historical anchor states. We further design a degeneracy-aware dual-mode outlier rejection strategy that switches between LIVO-prior-guided rejection and GNSS-aided recovery according to the LIVO degeneracy level. Experiments on the public M3DGR dataset and a custom 20~m/s fixed-wing UAV dataset demonstrate that our system reduces accumulated drift and map ghosting, outperforming state-of-the-art methods in accuracy and robustness.

Zhiyu Chen, Chunran Zheng, Jiayu Wen +4

College of Mechatronics and Control Engineering, Shenzhen University, Shenzhen 518060, China · Department of Mechanical Engineering, The University of Hong Kong, Hong Kong SAR, China · College of Automation, Harbin Engineering University, Harbin 150001, China

Robot Localization Multimodal Sensor Fusion

Jun 17, 2026cs.RO

Viking Hill Dataset: A Lidar-Radar-Camera Dataset for Detection and Segmentation in Forest Scenes

Autonomous robots operating under forest canopies need robust perception of trees and surrounding vegetation across varying seasonal conditions. Existing forestry datasets provide lidar or camera data with per-tree annotations, but none include co-registered 4D imaging radar -- a modality of growing interest for its resilience to visual degradation, surface contamination, and vegetation occlusion. We introduce a multi-sensor forest dataset collected by a mobile robot equipped with a high-resolution FMCW imaging radar, lidar, RGB camera, IMU, and RTK-GNSS. The site was recorded in two sessions under contrasting vegetation states, and 3D cuboid annotations -- including per-tree diameter estimates -- provide shared semantic labels across all three perception modalities. Furthermore, we provide baseline results for semantic segmentation of the radar and lidar point clouds using MinkowskiUNet. Radar achieves IoU scores competitive with lidar for dominant classes (ground 91%, canopy 86%) while lagging on geometrically fine structures such as tree trunks (56% vs. 74%). A cross-modality analysis further compares lidar and radar trunk segmentation against an RGB detection model, and a diameter-stratified evaluation reveals how trunk segmentation quality varies with tree size. Beyond segmentation, the co-registered multi-modal data and RTK-GNSS-aided reference positioning support research in mapping, localization, and sensor fusion under canopy. The dataset and annotation tools are publicly available.

Vladimír Kubelka, Oleksandr Kotlyar, Unal Artan +1

Örebro University, AASS research centre, Robot Navigation and Perception Lab, Örebro, Sweden

Millimeter-Wave Radar mmWave Radar Sensing 3D Semantic Segmentation Robotic Perception Multimodal Sensor Fusion

Jun 17, 2026cs.RO

Sensor Configuration Matters: A Systematic Evaluation of Multimodal SLAM on Quadruped Robots

Autonomous navigation of quadrupedal robots in diverse environments fundamentally relies on resilient Simultaneous Localization and Mapping (SLAM). While visual-inertial SLAM has matured across wheeled, handheld, and aerial platforms, a critical evaluation gap remains regarding how hardware-level sensor configurations affect performance under the aggressive dynamics of legged locomotion. Quadrupeds introduce distinct embodiment-induced sensory challenges, including foot-impact shocks, high-frequency mechanical vibrations, and rapid angular rotations, which degrade standard perception pipelines. To address this gap, we present a systematic evaluation of state-of-the-art visual, visual-inertial, and LiDAR-visual-inertial SLAM methods using the GrandTour dataset recorded on an ANYmal D quadruped. We isolate and quantify the impacts of camera modalities, shutter techniques, and inertial sensor tiers, analyzing their trade-offs across localization accuracy, algorithmic robustness, and computational resource utilization. Our empirical findings demonstrate that hardware selection has substantial influence on system resilience: stereo configurations consistently outperform monocular and RGB-D modalities, global shutter cameras significantly mitigate motion-induced tracking failures compared to rolling shutter cameras, and, crucially, standard inertial integration can degrade the performance of primarily vision-based frameworks under harsh legged locomotion. These insights additionally offer concrete design guidelines for tailoring custom sensor payloads to achieve dependable perception on agile legged systems.

Roberto Corlito, Fabian Schmidt, Nils Seibert +3

Machine Intelligence and Robotics Lab, Karlsruhe Institute of Technology (KIT), Germany. · Institute for Intelligent Systems, Esslingen University of Applied Sciences, Germany. · Department of Computer Science, University of Freiburg, Germany.

Simultaneous Localization and Mapping Visual-Inertial SLAM Multimodal Sensor Fusion

Jun 17, 2026cs.RO

Leveraging Energy Features for Surface Classification with Deep Learning: A Comparative Analysis Across Three Independent Datasets

The energy-based method remains a comparatively underexamined approach for surface classification in mobile robotics, despite promising results in constrained environments. This study evaluated the viability of using energy-derived features as either a standalone classification modality or as supplementary input to inertial data. A comprehensive evaluation was conducted across three publicly available datasets, comparing the performance of modern deep learning architectures including recurrent neural networks, convolutional neural networks, encoder-only transformers, and Mamba state-space models, under automated hyperparameter tuning and input sequence length optimization. The models achieved higher accuracy than previously reported values on all evaluated datasets, with the convolutional neural network yielding the highest overall performance. When relying exclusively on energy-based features, the models attained classification accuracies in the range of 85-90%, approximately 5-10% lower than those achieved when combined with inertial features (96-99%). Augmenting inertial data with energy features resulted in a consistent mean accuracy improvement of 1-2%. These findings indicate that classifiers relying solely on energy features offer sufficient accuracy for standalone deployment, while also providing a consistent gain when used in combination with other sensing modalities.

Alexander Belyaev, Oleg Kushnarev

National Research Tomsk Polytechnic University, Tomsk, Russia

Mobile Robotics Robotic Perception Multimodal Sensor Fusion

Jun 17, 2026cs.CV

Multi-Modal Hyper-Graph Fusion for Low-Light Crowd Counting

Crowd counting is a fundamental task in computer vision. However, crowd counting in low-light environments remains largely underexplored, despite its practical importance in the real world. Existing methods mainly focus on well-lit scenes or rely on single-modality Red-Green-Blue (RGB) representations, which often become unreliable under extreme darkness and complex non-uniform illumination. To handle this problem, we construct three new low-light crowd counting benchmarks, which consist of two synthetic datasets, SHA_Dark and SHB_Dark, and a real-world benchmark LC-Crowd (Low-light Crowd Dataset). Inspired by Retinex-based physical modeling, we introduce depth and Canny edge cues as complementary geometric and structural priors to enhance the intrinsic reflectance representation under low-light conditions. We propose a Multi-Modal Hyper-Graph Fusion module, which formulates RGB appearance, depth geometry, and edge structure cues as nodes in a unified hyper-graph and explicitly captures their high-order complementary relationships via dynamic hyperedge construction and message passing. Furthermore, to adaptively allocate computation in dense prediction, we propose a Deformable Rectangular Sparse Attention (DRSA) module, which concentrates computation on informative regions through anchor-aware estimation and adaptive rectangular window modeling. Based on these designs, we develop a unified Low-Light Counting Network (LCNet) for robust low-light crowd counting. Extensive experiments on three benchmarks demonstrate that the proposed method achieves the best overall performance against existing state-of-the-art (SOTA) methods. The code is in the supplementary material. The datasets will be made public upon acceptance.

Hao-Yuan Ma, Li Zhang, Yushi Qiu +3

School of Computer Science and Technology, Soochow University, Suzhou, China

Crowd Counting Deformable Attention Density Estimation Multimodal Sensor Fusion

Jun 16, 2026cs.CV

Heterogeneous SAR-optical fusion for near-real-time land use and land cover mapping under cloud contamination: A novel framework and global benchmark dataset

Optical remote sensing imagery is frequently degraded by cloud and cloud-shadow contamination, which limits its reliability for near-real-time land use and land cover (LULC) mapping. Although synthetic aperture radar (SAR) can provide cloud-penetrating structural information, existing SAR-optical fusion methods often assume reliable optical observations and insufficiently address the semantic uncertainty introduced by cloud contamination. To address this issue, we propose CloudLULC-Net, an end-to-end heterogeneous SAR-optical fusion framework that directly predicts LULC maps from cloud-contaminated Sentinel-2 imagery and temporally adjacent Sentinel-1 SAR observations. The proposed network incorporates optical reliability modulation to suppress unreliable optical responses, heterogeneous information adaptive aggregation to model high-order spatial-channel interactions between optical and SAR representations, and a unified semantic mapping transformer to organize fused features in a LULC-oriented latent space. A semantic anchor-guided optimization strategy is further introduced to improve the consistency of intermediate semantic representations. To support this task, we construct CloudLULC-Set, a large-scale benchmark dataset containing 40,223 curated SAR-optical-label triplets with pixel-level LULC annotations across diverse geographic regions and cloud conditions. Experimental results show that CloudLULC-Net achieves an OA of 86.60%, an F1-score of 83.29%, and an mIoU of 73.51%, outperforming representative heterogeneous reconstruction-first and end-to-end SAR-optical mapping methods. Comparisons with existing global LULC products and analyses under different cloud-cover levels further demonstrate the robustness and practical value of CloudLULC-Net for target-date LULC mapping in cloud-prone regions.The project is publicly available at: https://github.com/RSIIPAC/CloudLULC

Jiangong Xu, Weibao Xue, Xiaoyu Yu +3

State Key Laboratory of Information Engineering in Surveying, Mapping and Remote Sensing, Wuhan University, Wuhan 430079, China · Oriental Space Port Research Institute, Yantai, 265100, China · Hubei Luojia Laboratory, Wuhan, 430079, China +3

Land Cover Classification Remote Sensing Remote Sensing Benchmarks Multimodal Sensor Fusion

Jun 16, 2026cs.RO

MuseVLA: An Adaptive Multimodal Sensing Vision-Language-Action Model for Robotic Manipulation

Humans naturally leverage diverse sensing modalities to interact with the physical world, while most Vision-Language-Action (VLA) models for robotics rely solely on RGB observations. This limits their ability to perceive physical properties that are difficult or impossible to infer from RGB cameras, such as temperature, sound, or radar response. We present MuseVLA, an adaptive multimodal sensing VLA model that integrates novel sensors as on-demand tools for robotic manipulation. Given a task instruction and visual context, MuseVLA first generates a sensor token and target description that select the sensing modality to invoke and what to attend to, analogous to a tool call with arguments. It then converts the selected sensor measurement into a grounded sensor image, a unified intermediate representation that encodes heterogeneous readings for multimodal fusion and action generation. This design decouples sensor-specific processing from the VLA backbone, enabling efficient integration of diverse modalities. To reduce the need for expensive multisensory robot datasets, we further introduce a data synthesis pipeline that augments existing RGB video datasets with grounded sensor images, enabling generalization to unseen sensor-guided tasks. We evaluate MuseVLA on a real-world robot across challenging dexterous hand manipulation tasks that require multimodal sensing inputs, including temperature-guided pick-and-place, audio-driven object search, and radar-assisted hidden object retrieval. MuseVLA achieves 80.6% success rate on average, outperforming RGB-only and multisensory VLA baselines significantly, and exhibits strong zero-shot capabilities on unseen tasks.

Xingyuming Liu, Ruichun Ma, Heyu Guo +7

School of Computer Science, Peking University · 2Microsoft Research Asia · *Work done during internship at Microsoft Research Asia. +2

Language-Conditioned Robot Manipulation Robotic Manipulation Vision-Language-Action Models Robotic Perception Multimodal Sensor Fusion

Jun 16, 2026cs.RO

Contactless Respiratory Monitoring on Heterogeneous Mobile Robots: A Multimodal Edge-Computing Framework

Respiratory-rate (RR) monitoring is a critical component of remote triage and victim assessment in emergency response, disaster recovery, and infectious-disease scenarios, where minimizing physical contact can reduce responder risk and improve operational safety. However, field deployment of contactless RR monitoring remains challenging due to variable illumination, posture changes, platform heterogeneity, and the impracticality of wearable sensors in hazardous environments. In this paper, we present a modality-adaptive contactless RR monitoring framework for heterogeneous mobile robots with onboard edge computing. The proposed system combines brightness-adaptive sensor selection across RGB, thermal, near-infrared (NIR), and low-light cameras, keypoint-guided chest ROI extraction for posture-robust monitoring, and a signal-quality-index (SQI)-based filtering mechanism for reliable respiratory estimation. We implement and evaluate the framework on three robotic platforms spanning quadruped and wheeled locomotion and multiple edge-computing architectures. Experiments conducted across diverse lighting conditions, subject poses, and robot-to-subject distances demonstrate that the framework generalizes across platforms without per-platform algorithmic retuning, while revealing modality-specific operational boundaries. RGB provides the broadest coverage up to 8m, NIR remains effective up to 6m, thermal is reliable only at short range, and low-light sensing supports monitoring in complete darkness up to 8m. Overall, the results demonstrate the feasibility of multimodal contactless RR monitoring on mobile robots and support its use as a foundation for autonomous triage and victim assessment in hazardous search-and-rescue settings.

Milind Rampure, Shadman Sakib, Haley Patel +2

Department of Information Systems, University of Maryland Baltimore County, USA · Department of Computer Science, University of Maryland Baltimore County, USA

Multimodal Sensor Fusion

Jun 12, 2026cs.CL

Deep Temporal Modeling and Ensemble Fusion for Multimodal Emotion Recognition from Physiological Signals

Physiological stress and emotion recognition are important for health monitoring and affective computing. In this work, we present a comprehensive evaluation of deep learning models such as Long Short-Term Memory (LSTM), Temporal Convolutional Networks (TCN), and Transformer on the WESAD dataset for multimodal affect recognition using wrist and chest sensor signals. We perform ablation studies to assess the individual contributions of each modality by training models on wrist-only and chest-only inputs. In addition, we implement a late-fusion ensemble strategy that combines predictions from all three architectures trained on multimodal input. We also employ early fusion at the sensor level by concatenating wrist and chest signals before feeding them into each model. Our results show that Transformer models consistently achieve the highest accuracy in multimodal settings, while TCN models perform best in the wrist-only configuration. The ensemble method yields the highest overall accuracy (98.91 +/- 0.13%) and macro-F1 score (98.56 +/- 0.17%). These findings demonstrate the effectiveness of sensor fusion and ensemble-based fusion in developing robust systems for physiological emotion recognition.

Desta Haileselassie Hagos, Saurav Keshari Aryal, Patrick Ymele-Leki +2

Howard University Washington, DC, USA

Temporal Convolutional Networks Deep Ensembles Multimodal Emotion Recognition Emotion Recognition Multimodal Sensor Fusion

Jun 12, 2026cs.CV

FEMOT: Multi-Object Tracking using Frame and Event Cameras

Conventional RGB cameras have been widely used in multi-object tracking due to their ability to capture rich appearance and semantic information. However, their performance is often degraded under complex real-world challenges, such as motion blur, low illumination, and overexposure. Bio-inspired event cameras offer high temporal resolution and high dynamic range, providing complementary cues under extreme scenarios. Nevertheless, RGB-event multi-object tracking remains underexplored due to the lack of large-scale and well-annotated datasets. To address this issue, we propose FEMOT, a large-scale RGB-event multi-object tracking dataset that covers diverse real-world scenarios and 14 challenging attributes. With both RGB and event data as well as high-quality annotations, FEMOT provides a reliable platform for systematically evaluating RGB-event multi-object tracking methods. Based on FEMOT, we retrain and evaluate over ten strong trackers, thereby establishing a comprehensive benchmark for future research. Furthermore, we propose FEMOTR, a multimodal tracking framework that decouples RGB and event features and fuses them in the frequency domain, thereby effectively exploiting their complementary characteristics for robust object localization and identity association. Extensive experiments on FEMOT and DSEC-MOT datasets demonstrate the effectiveness of the proposed method. The source code and benchmark dataset have been released on https://github.com/Event-AHU/FEMOT.

Shiao Wang, Xiao Wang, Chao Wang +6

School of Computer Science and Technology, Anhui University, Hefei, 230601, China. · 2Peng Cheng Laboratory, Shenzhen, China. · 5Harbin Institute of Technology, Shenzhen, China. +2

Event-Based Vision Visual Object Tracking Multimodal Sensor Fusion Multi-Object Tracking

Jun 11, 2026cs.CV

Heterogeneous LiDAR Early Fusion and Learned Re-Ranking Strategy for Robust Long-Term Place Recognition in Unstructured Environments

Robust localization in unstructured environments, such as agricultural fields, is a critical challenge for autonomous systems. LiDAR sensors provide detailed 3D information about the environment and are invariant to lighting conditions. For this reason, LiDAR-based place recognition methods have gained significant attention. In this paper, we propose MinkUNeXt-VINE++, a novel approach that combines early fusion of heterogeneous LiDAR data from two sensors (Livox Mid-360 and Velodyne VLP-16) and a learned re-ranking strategy in inference time. This fusion leverages the strengths of each sensor to provide a more comprehensive representation of the environment. Additionally, the re-ranking approach is particularly important in repetitive environments, such as vineyards, as finding true positives is a major challenge. We evaluated our approach using the TEMPO-VINE dataset, which provides heterogeneous LiDAR data in vineyard environments across different phenological stages. Our results demonstrate that MinkUNeXt-VINE++ significantly improves place recognition performance compared to single-sensor approaches and state-of-the-art methods. MinkUNeXt-VINE++ achieves a 20% improvement in the Recall@1 metric compared to single-sensor approaches, and +30% including re-ranking. The code of our method is publicly available for reproduction.

Judith Vilella-Cantos, Juan José Cabrera, Mónica Ballesta +2

University Institute for Engineering Research, Miguel Hernández University, Avda. de la Universidad s/n, Edificio Innova, Elche, 03202, Alicante, Spain

LiDAR Place Recognition Agricultural Robotics Robot Localization Multimodal Sensor Fusion

Jun 11, 2026cs.AI

MOSAIC: Modality-Specific Adaptation for Incremental Continual Learning in Parkinson's Disease Gait Assessment

Gait-based Parkinson's disease assessment increasingly relies on heterogeneous sensors, but clinical systems rarely collect all modalities simultaneously. New sensors may arrive through device upgrades, protocol changes, or multi-center deployment, while historical patient data are often unavailable because of privacy and storage constraints. This modality-incremental setting faces three challenges: unreliable cross-modal distillation, modality-specific statistical shifts, and reduced plasticity after preservation. We propose MOSAIC, a compact continual learning framework. First, we identify the Toxic Teacher phenomenon and introduce Modality-Specific Warm-Up to stabilize newly learned modality representations before distillation. Second, we propose a statistics-decoupled MSBN architecture that isolates sensor statistics while maintaining a shared semantic backbone. Third, we design a curriculum-guided repulsive objective for Plasticity Recovery, preserving legacy knowledge while recovering modality-specific capacity. Experiments on three multimodal Parkinson's gait datasets show that MOSAIC improves final performance and mitigates forgetting. Project code is available at: https://github.com/minlinzeng/MOSAIC_Modality-Specific-Adaptation-for-Incremental-Continual-Learning-in-PD-Gait-Assessment.git

Minlin Zeng, Zhipeng Zhou, Yang Qiu +2

Nanyang Technological University, Singapore · Pacific Parkinson’s Research Centre, University of British Columbia, Canada

Cross-Modal Knowledge Distillation Continual Learning Gait Analysis Parkinson's Disease Multimodal Sensor Fusion

Jun 11, 2026cs.CV

DIMOS: Disentangling Instance-level Moving Object Segmentation

Moving instance segmentation (MIS) attracts increasing attention due to its broad applications in traffic surveillance, autonomous driving, and animal tracking. Event cameras record asynchronous brightness changes, providing high temporal resolution and dynamic range, which makes them highly sensitive to motion information. By fusing event and image features, motion cues from events can complement spatial details from images, enhancing the performance of MIS. However, current multimodal MIS methods still struggle to segment small moving instances, as event cameras often yield sparse features under limited resolution. Moreover, event features entangle appearance attributes with motion cues, which further restricts effective cross-modal fusion. To address these challenges, we first propose a dual-disentangling feature extraction framework that separates and extracts appearance and motion information within both image and event modalities, thereby improving feature density. Subsequently, a multi-granularity cross-modal alignment is introduced to align distributionally and semantically consistent features across modalities, enabling more effective fusion with rich spatial and temporal details. The experiment results demonstrate that our method achieves state-of-the-art performance in multimodal MIS, especially for small instances under challenging conditions such as fast motion and low-light settings.

Hongxiang Huang, Hongwei Ren, Xiaopeng Lin +3

The Hong Kong University of Science and Technology (Guangzhou) Guangzhou, China

Event-Based Vision Disentangled Representation Learning Instance Segmentation Cross-Modal Alignment Multimodal Sensor Fusion

Jun 10, 2026cs.RO

DAM-VLA: Decoupled Asynchronous Multimodal Vision Language Action model

Vision-language-action (VLA) models inherit a shared synchronous clock from vision-language pretraining, processing every input at one rate. This is misaligned with physical interaction, where a high-frequency modality changes at hundreds of hertz, vision evolves more slowly, and language stays constant across an episode. A synchronous VLA oversamples slow modalities, undersamples fast ones, and caps action generation at the lowest effective frequency. We hypothesize that decoupling temporal processing per modality, letting each update and retain information at its own sensor rate, yields stronger representations and more robust control. We present DAM-VLA, which maintains per-modality latent buffers refreshed at sensor rates and read continuously by the action head, integrating new high-frequency modalities through gated cross-attention that leaves the pretrained backbone intact. Across seven contact-rich real-world manipulation tasks, DAM-VLA more than doubles the average success rate of the strongest synchronous baseline (95.2% vs.\ 40.95%) while sustaining smooth, reactive 100,Hz control. Project website: intuitive-robots.github.io/DAM-VLA/

Pankhuri Vanjani, Zhuoyue Li, Jakub Suliga +4

Intuitive Robots Lab, Karlsruhe Institute of Technology (KIT), Germany · NVIDIA · Robotics Institute of Germany

AI Control Robotic Manipulation Vision-Language-Action Models VLMs for Robotics Multimodal Sensor Fusion

Jun 10, 2026cs.CV

DroneShield-AI: A Multi-Modal Sensor Fusion Framework for Real-Time Autonomous Drone Threat Detection, Behavioral Intent Classification, and Swarm Intelligence in Contested Airspace

Unmanned Aerial Vehicle (UAV) threats have emerged as a defining security challenge of the 21st century. This paper presents DroneShield-AI, a unified open framework integrating six processing layers: RF signal classification, acoustic motor-signature detection, YOLOv8-based visual detection, evidence-weighted sensor fusion, a Behavioral Intent Classification Engine (BICE), and a Graph Neural Network Swarm Intelligence Module (GNN-SIM). BICE introduces the first systematic six-class threat taxonomy for drone flight patterns, enabling predictive operator alerts with a 30-second advance-warning horizon. GNN-SIM is the first open framework for adversarial multi-drone formation analysis using Graph Attention Networks. Evaluated on three publicly available real-world datasets, the fused pipeline achieves 96.1% detection accuracy, 3.2% false alarm rate, AUC-ROC: 0.981, and 142ms end-to-end latency on commodity CPU-class hardware at approximately

500-

780 USD total system cost. All code, model weights, and simulation datasets are publicly released at submission.

Marius Bayizere

Independent Researcher, Kigali, Rwanda

Graph Neural Networks Intent Classification Aerial Object Detection Multimodal Sensor Fusion

Jun 9, 2026cs.RO

TacForeSight: Force-Guided Tactile World Model for Contact-Rich Manipulation

Contact-rich manipulation requires robots to continuously perceive and regulate evolving physical interactions under dynamic contact transitions or complex surface geometries. Recent imitation learning methods improve contact-aware control by incorporating tactile or force feedback, but they rarely model the asymmetric spatiotemporal roles of global force and local tactile sensing. To address this, we propose TacForeSight, a lightweight force-conditioned tactile foresight framework for real-time manipulation. The core component is TacForceWM, a tactile world model that predicts short-horizon tactile latent dynamics from dual-finger tactile observations conditioned on high-frequency wrist force and torque signals. Another key component, the Predictive Tactile-Conditioned Policy, leverages the predicted latents as anticipatory contact priors, models the current-to-future tactile evolution via cross-attention, and adaptively fuses visuo-tactile features through a tactile-guided gating module. By forecasting purely within a compact latent space, TacForeSight enables proactive contact reasoning with efficient real-time inference suitable for high-frequency manipulation control. Real-robot experiments on five representative tasks and three in-process perturbation settings show that TacForeSight consistently outperforms existing baselines, particularly under dynamic contact disturbances. All models and datasets will be made publicly available on the project website at https://tacforesight.github.io/ProjectPage.

Yujie Zang, Yuhang Zheng, Xian Nie +7

TARS Robotics · National University of Singapore · Shanghai Jiao Tong University +2

World Models for Robotics Contact-Rich Robotic Manipulation World Models Tactile Sensing for Robotic Manipulation Multimodal Sensor Fusion Tactile World Models

Jun 8, 2026cs.CV

ATN3D: Density-Aware LiDAR-Radar Early 3D Object Detection Under Extreme Sparsity

3D object detection is the backbone of perception for automated vehicles (AV) and broader intelligent transportation systems applications. Long-range detection is challenging because sensing evidence is sparse; yet this

long-range'' scenario is routine in traffic. Although >30m is often labeled long-range in computer vision, on roadways it affords only approx. 1-2s for perception and decision-making. Under such extreme sparsity, two core challenges arise. First, early multimodal fusion tends to discard sparsity information and inject noise from empty or falsely occupied cells, degrading long-range recall. Second, context-agnostic uniform channel supervision favors dense and near-range samples, leaving far and small objects under-optimized, delaying the earliest detection of distant objects. We propose

Ask The Neighbor'' (ATN3D), a LiDAR-Radar framework tailored for sparse-range conditions. ATN3D introduces (i) Density-aware early fusion with cross-modal gating that conditions fusion on per-voxel density/sparsity and Radar evidence, (ii) Occupancy-gated neighborhood aggregation with circular kernels to aggregate only from credible cells, (iii) Evidence-conditioned channel self-attention to adapt channel weights with weather/range, and (iv) a Range-aware loss that re-balances classification and localization by distance, aligning training with distance-stratified evaluation. On the VoD benchmark across clear and foggy conditions, ATN3D surpasses strong baselines: +3.55% mAP in clear weather and +8.41% mAP under simulated heavy fog; for >30m objects, gains are +3.33% (clear) and +2.09% (heavy fog). These results indicate earlier and more reliable long-range detections under sparse sensing in on-road traffic.

Debojyoti Biswas, Xianbiao Hu

Lidar-Based 3D Object Detection Autonomous Driving Perception 3D Object Detection Multimodal Sensor Fusion

Jun 8, 2026cs.CV

IB-HFN: Information Bottleneck-Driven SAR-Optical Fusion Network for High-Fidelity Cloud Removal

Synthetic aperture radar (SAR)-assisted optical cloud removal aims to recover surface information obscured by clouds in optical remote sensing images by exploiting complementary SAR observations. Existing multimodal fusion methods typically rely on direct spatial concatenation and pixel-wise supervision, which can propagate SAR speckle noise into optical reconstruction and lead to over-smoothed results. To address these limitations, we propose an Information Bottleneck-driven High-Fidelity Network (IB-HFN) for SAR-assisted optical cloud removal. IB-HFN employs a dual-stream backbone to preserve modality-specific representations before deep semantic fusion, thereby mitigating premature cross-modal contamination. At the fusion stage, we introduce a Spatial Information Bottleneck Fusion module that compresses SAR features through a channel-wise variational information bottleneck to suppress unstructured speckle noise. In parallel, a local-global gating mechanism predicts clear-sky regions and routes reliable optical details through a Dirac-initialized skip connection, decoupling noise suppression from texture preservation. We further develop a joint optimization strategy that integrates feature-level bottleneck regularization with image-level constraints on reconstruction accuracy, structural consistency, spectral fidelity, and contrastive sharpness. A dynamic weighting schedule balances these objectives to stabilize training and reduce hazy artifacts. Experiments on the SEN12MS-CR dataset under challenging spatio-temporal splits demonstrate that IB-HFN achieves superior structural preservation and spectral fidelity over existing methods.

Haojun Guo, Fan Feng, Ziquan Wang +2

Institute of Geospatial Information, Information Engineering University, Zhengzhou 450001, China

Remote Sensing Multimodal Fusion Multimodal Sensor Fusion

Jun 7, 2026cs.RO

RGB-S: Image-Aligned Tactile Saliency for Robust Dexterous Manipulation

Effective visuo-tactile integration is critical for robotic dexterous manipulation, especially when visual observations are unreliable or occluded. However, robustly aligning sparse, heterogeneous tactile measurements with dense visual representations remains a fundamental challenge. Most existing approaches require policies to learn cross-modal correspondences implicitly from limited demonstrations, without leveraging geometric priors. As a result, they are often data-inefficient and generalize poorly when visual observations are degraded. To address this limitation, we propose a framework that explicitly grounds physical contacts in the image domain. Using robot forward kinematics and camera calibration, we project tactile sensor locations directly onto the RGB image plane. We then render force-modulated Gaussian saliency maps to model spatial uncertainty arising from kinematic and calibration errors. By integrating these 2D spatial anchors through a zero-initialized conditioning architecture, our method injects physical contact priors into standard visual backbones while preserving pre-trained visual representations. We evaluate our method on six dexterous manipulation tasks in both simulation and the real world under severe visual occlusions. Real-world experiments show that explicit RGB-S grounding in the image domain improves real-world occluded manipulation success rates by

26.7

percentage points over the strongest implicit visuo-tactile baseline, suggesting its improved spatial reasoning and robustness to occlusion. Project page: touch-as-saliency.github.io

Shengcheng Luo, Kefei Wu, Xiaoying Zhou +3

ShanghaiTech University · Beijing Institute for General Artificial Intelligence

Contact-Rich Robotic Manipulation Visuo-Tactile Representation Learning Robotic Manipulation Tactile Sensing for Robotic Manipulation Multimodal Sensor Fusion

Jun 7, 2026cs.RO

Dream-Tac: A Unified Tactile World Action Model for Contact-Rich Robot Manipulation

World action models inherit the predictive capability of world models, enabling action generation to be guided by anticipated future observations. However, they rely primarily on vision and often fail in contact-rich manipulation, where critical cues arise from physical interaction. In this paper, we propose Dream-Tac, a unified Tactile-World Action Model that jointly models actions, future visual observations, and tactile dynamics. Specifically, Dream-Tac introduces (i) contact-gated visuotactile fusion to selectively integrate tactile signals and (ii) a contact-aware attention bias to better regulate cross-modal interactions during manipulation. To support real-time deployment, we further design a dual-level acceleration strategy, reformulating the contact-aware bias to preserve the fused attention path during training and introducing cache-based diffusion acceleration at inference, achieving up to 2.9

\times

faster training and 1.8

\times

faster inference. Across six contact-rich manipulation tasks, Dream-Tac improves action accuracy by 31.7% on average, demonstrating the effectiveness of unified visuotactile world modeling.Code is available at https://github.com/LYFCLOUDFAN/Dream-Tac.

Yunfan Lou, Yifan Ye, Yankai Fu +7

Peking University Beijing, China · Nanjing University Nanjing, China · State Key Laboratory of Multimedia Information Processing, School of Computer Science, Peking University Beijing, China

World Models for Robotics Contact-Rich Robotic Manipulation Action-Conditioned World Models World Action Models Tactile Sensing for Robotic Manipulation Multimodal Sensor Fusion+1

Jun 7, 2026cs.RO

Language as a Sensor: Calibrated Spatial Belief Estimation in 3D Scenes from Natural Language

Robots deployed in human-centric environments routinely receive natural-language descriptions of spatial information ("I left my backpack on the table") that reference parts of the world beyond their perceptual field of view. Traditional metric-semantic mapping ignores this signal, while off-the-shelf multimodal models remain limited in 3D spatial reasoning and are not directly amenable to fusion with other sensor modalities. To convert language observations into a calibrated spatial distribution, we train a Language Sensor Model (LSM) that maps each utterance and its scene-graph context to a multimodal distribution, with mixture weights encoding referential ambiguity (e.g., "which table") and component covariances encoding spatial uncertainty (e.g., where "on the table" the target lies). We then introduce VL-Map (Vision-Language Metric-Semantic Mapping), a probabilistic framework that treats these language predictions as stochastic observations and fuses them with onboard perception within a unified belief map. On the VLA-3D benchmark as well as on a real-world mobile robot, LSM is the only language predictor whose covariance estimates remain within the calibrated regime; fused into VL-Map, it leads to more accurate predictions of the target object location (~70% more probability mass on the true target compared to the strongest foundation-model baseline).

Aryan Naveen, Jason Xinyu Liu, Luca Carlone +1

MIT Laboratory for Information & Decision Systems · MIT Computer Science & Artificial Intelligence Laboratory

Vision-Language Grounding Semantic Mapping Multimodal Sensor Fusion Multimodal Understanding

Jun 5, 2026stat.AP

An Integrated Roadside Sensing and Communication Framework for Vulnerable Road User Safety at Signalized Intersections

Vulnerable road users (VRUs) account for approximately half of urban traffic deaths globally, with intersections concentrating a disproportionate share of these casualties. Recent reviews of sensing technology for VRU protection have cataloged dozens of single-sensor and dual-sensor deployments, yet none of the surveyed systems couples multi-modal sensing with edge-side near-miss analytics and bidirectional vehicle-to-everything (V2X) and pedestrian-to-everything (P2X) messaging in a single intersection cabinet. This paper presents an integrated framework for VRU protection at signalized intersections, combining LiDAR, radar, RGB camera, and thermal camera at the perception layer, edge-based prediction and surrogate-safety analytics at the computation layer, V2X and P2X messaging at the communication layer, and adaptive signal control at the actuation layer. The framework is grounded in an empirical case study using R-LiViT, the first publicly released roadside LiDAR-Visual-Thermal dataset, which provides 200 multi-modal sequences and 2,400 annotated RGB-T frames at three German intersections. Analysis of 53,319 detection annotations reveals that VRUs comprise approximately 49% of all road-user observations, that day-to-night density drops by 38% for pedestrians and 45% for vehicles while the night distribution shows a higher close-proximity share, that per-frame close-proximity event counts vary approximately 10-fold across the eight unique locations at three intersections, and that 83% of pedestrian bounding boxes are small in image space, indicating that VRUs are typically far from any single sensor. These findings support multi-modal sensing, edge-side analytics, and adaptive context-sensitive deployment rather than uniform single-sensor solutions.

Parvez Anowar

PhD Student, Department of Civil, Environmental and Construction Engineering, University of Central Florida, 12800 Pegasus Drive, Orlando, FL 32816, United States

Integrated Sensing and Communication Intelligent Transportation Systems Multimodal Sensor Fusion

Jun 4, 2026cs.RO

Multi-Resolution Tactile Imitation Learning for Contact-Rich Robotic Manipulation

Touch sensing is beneficial for solving a wide variety of manipulation tasks. While there exists a wide range of tactile sensors with different properties, exploiting the fusion of multiple heterogeneous tactile sensors to improve manipulation learning remains underexplored. We present Multi-Resolution Tactile Sensing (MiTaS), a representation framework that leverages multiple tactile sensors operating at different temporal resolutions in order to solve complex contact-rich manipulation tasks. We propose a novel architecture using modality-specific convolutional stems and transformer-based fusion that effectively fuses information from an RGB camera stream, a vision-based GelSight Mini sensor and a high-frequency event-based Evetac sensor. This multi-sensor representation then conditions a flow-matching policy for solving downstream tasks. Experimental results across five contact-rich manipulation tasks demonstrate the effectiveness of multi-resolution tactile features in imitation learning. MiTaS achieves an average success rate of 80 %, while vision-only (31 %) and visual-tactile (54 %) baselines cannot solve the task reliably. Co-training a visuo-tactile model with multi-tactile data boosts performance by over 10 % in certain tasks, without having access to the Evetac sensor during policy evaluation. A detailed sensor-reading and attention analysis reveals the importance of different sensors throughout task execution, validating our multi-resolution tactile sensing approach. Project Page: http://mitas-touch.github.io.

Rickmer Krohn, Erik Helmut, Niklas Funk +3

Interactive Robot Perception & Learning, TU Darmstadt · Hessian AI · Robotics Institute Germany +1

Tactile Sensing Contact-Rich Robotic Manipulation Visuo-Tactile Representation Learning Robot Imitation Learning Tactile Sensing for Robotic Manipulation Multimodal Sensor Fusion