Register Transfer Level

AI-generated RTL verification plans can satisfy a provider schema yet fail at the boundary to trusted execution. We present SecTB-RTL, an auditable framework covering 31 tasks and 124 authored hardware-security regressions. A deterministic non-AI baseline killed 36, 75, and 78 mutants at increasing resource limits. The first confirmatory run (C1-R2) failed before model execution because the provider rejected its response schema. After a schema-only repair made without viewing outcomes, a separately frozen follow-up run (C1-R3) completed 1,860 calls. The provider accepted 1,857 responses, but only nine passed the production semantic validator. The generation and execution rules did not match. We therefore preserve the run as an instrument-validation incident and report no prompt-effect estimate. This incident shows that provider or schema acceptance does not establish execution validity. Compilation and coverage are only diagnostics; the exact saved artifact must pass the full production path. A subsequent follow-up is excluded because it did not satisfy the preregistered evidence-completeness gate and is treated only as future work. We release the benchmark, failure-preserving contract, incident provenance, and governance controls needed to prevent infrastructure behavior from being misreported as model behavior.

High Performance Computing-Quantum Computing (HPCQC) platforms expose multiple Quantum Processing Units (QPUs) that may differ in size, topology, native gates, and noise characteristics. For current noisy devices, errors compound along the compiled circuits quickly, and minimizing them, that is, maximizing the circuits' execution fidelity, is essential for reliable results. Fidelity depends on the compilation to a specific target device: the same high-level circuit may produce different executables and, therefore, different expected fidelities across QPUs. We present a low-overhead fidelity-aware scheduling framework for multi-QPU systems based on a Graph Neural Network (GNN) that estimates, before compilation, the expected fidelity of each circuit on each available QPU. Then, a tunable scheduler uses these estimates to control the trade-off between execution fidelity and parallelism. Results show that this framework allows for approximating an exhaustive fidelity-based assignment, saving computational resources compared to a brute-force approach that compiles each circuit on every device.

As integrated circuit technology scales into the nanometer regime, the traditional disconnect between logic synthesis and physical design has led to significant PPA (Power, Performance, and Area) degradation and prolonged design closure cycles. Traditional logic synthesis relies on non-physical Wire Load Models (WLMs), while recent spectral-based placement predictors often neglect the inherent hierarchical logic depth and signal flow of netlists, which leads to low-fidelity spatial estimations. To bridge this gap, we propose LevelSyn, a novel physical-aware logic synthesis framework that integrates hierarchical representation learning with a wirelength-driven optimization engine. At its core, LevelSyn leverages a level-asynchronous Graph Neural Network (GNN) to predict high-fidelity gate coordinates by capturing the structural and directional semantics of And-Inverter Graphs (AIGs). To handle industrial-scale designs, a level-aligned subgraph partitioning strategy is introduced to eliminate memory bottlenecks while preserving local logical dependencies. These spatial insights are seamlessly integrated into a newly developed physical-informed synthesis engine within the Berkeley ABC framework. Experimental results on the EPFL benchmark suite demonstrate that LevelSyn significantly outperforms state-of-the-art (SOTA) methods, achieving an average power reduction of 6.89% and a timing delay improvement of 27.48%. Furthermore, post-place-and-route validation shows a 99.59% reduction in design rule check (DRC) violations, highlighting its effectiveness in accelerating design convergence.

Automated repair of Hardware Description Language (HDL) designs remains challenging due to the large search space of candidate repairs and the strict syntactic and semantic constraints imposed by HDL grammars. Generic mutation strategies overwhelmingly generate syntactically invalid candidates that waste compilation and simulation budget, while synthesis-driven and template-based approaches impose their own constraints on generality and portability. In this paper, we propose a dictionary-guided HDL repair system that combines ANTLR-derived DUT-specific mutation vocabularies with a simulation-divergence fault localization (FL) module. The mutation operator applies category-constrained token substitutions, insertions, and deletions directly to Verilog source via regex-based matching, without requiring AST manipulation or synthesis. The FL module identifies diverging output wires from a single simulation run and scores source lines by structural proximity to those signals, directing the mutation search toward high-suspicion regions. A deterministic targeted sweep exhausts all dictionary mutations on the highest-scored lines before falling back to a genetic programming (GP) search. Evaluated on the CirFix benchmark suite across six design under test (DUT) families, the proposed approach produces correct oracle-passing repairs on 14 bug variants, including a 6-edit multi-bug instance that CirFix cannot repair, and achieves an 18x speedup over CirFix on a two-edit benchmark variant. These results indicate that dictionary-constrained mutation operators, combined with lightweight simulation-divergence FL, are a practical and competitive approach to automated HDL repair for common bug classes without formal analysis or synthesis dependencies.

Large language models (LLMs) are increasingly used in software development, but their use in complex hardware design remains limited. This gap stems from both the scarcity of public hardware training data and the fundamentally different methodologies used in hardware design. In particular, applying LLMs to hardware requires more than direct RTL generation: the model must understand module boundaries, inter-module connections, and verification requirements. In this paper, we present an LLM-based hardware development framework with hierarchical intermediate representations (IRs) and an end-to-end multi-agent workflow. The core idea is to provide an abstraction of hardware design to LLMs through two structured IRs: Architectural Sketch, which captures module topology and interconnection, and Operational Specification, which defines per-module functionality and interfaces. Our framework uses these IRs to decompose a complex design into sub-modules, specify the per-block functionality, and derive how each module should be tested and verified. We incorporate a multi-agent debug loop in the framework, allowing agents to get the error feedback and control the debug details such as the signals to be probed for simulation. We evaluate our framework on Verilog-Eval benchmark, achieving a pass@5 rate of 95.5%, which surpasses current state-of-the-art LLM generation frameworks. To better assess performance on complex, realistic designs, we introduce a new case study spanning applications from general-purpose processors to digital signal processing systems. Experimental results indicate that such complex designs exceed the capabilities of existing approaches, whereas our framework is the only one capable of producing functional end-to-end design. Our generated RTL follows all industry-standard design rules, is lint-clean, functionally correct and fully synthesizable.

Logic synthesis transforms RTL designs into gate-level netlists, where PPA results are highly sensitive to the choice of optimization commands, making synthesis tuning both high-dimensional and expensive. Previous approaches fall into two categories: automated methods, which perform black-box search over fixed action spaces with limited decision-level interpretability, and LLM-based methods, which typically generate static scripts upfront and cannot adapt to evolving circuit states. We present SynAct, an adaptive closed-loop LLM reasoning--acting agent that iteratively diagnoses live synthesis reports and reasons over the current circuit state, retrieved tool knowledge, and historical optimization experience to issue targeted commands. SynAct focuses on improving timing, particularly worst negative slack (WNS), while maintaining balanced area and power trade-offs. Experiments on a commercial synthesis tool across 14 designs show that SynAct reduces average WNS to 27% of that from bootstrap synthesis.

Boosted decision trees (BDTs) are widely used in latency-critical applications, but efficient hardware deployment remains challenging. Existing designs often rely on uniform or manually tuned fixed-point formats, which can introduce unnecessary hardware cost or accuracy loss. This work presents the FQTree algorithm{https://github.com/ecs-bristol/FQTree} for fine-grained quantization-aware training of BDTs, together with the QXGB framework for automatic hardware generation. FQTree introduces a hardware-oriented leaf-value quantization scheme that uses a global quantization step together with a tree-wise shift, enabling compact non-negative integer leaf representations, controlled clipping/pruning, and bias folding to reduce datapath cost. This work further applies this quantization during boosting so that later trees adapt to the errors of the already-quantized ensemble, and then lowers the trained model into low-latency hardware implementations through a compiler-based flow. Results on JSC, MNIST, and NID show that our method reduces LUT usage by 26-57% compared with the state-of-the-art FPGA-based BDT designs while matching or improving accuracy.

Wavelet convolution (WTConv) has emerged as an increasingly popular drop-in replacement for standard convolutions, expanding a network's receptive field exponentially with the number of decomposition levels while keeping the parameter count linear. However, its reference implementation is severely memory-bound due to excessive data movement through high-bandwidth memory (HBM). We develop an I/O model of WTConv to characterize this bottleneck and use it to guide three algebraic reformulations: (1) recomputing the inexpensive Haar analysis butterfly on chip, (2) collapsing the multi-level synthesis cascade into a single closed-form pass indexed by output-coordinate bits, and (3) folding learned per-channel scales into the convolution weights. Together, these reformulations enable an I/O-aware fused implementation that substantially reduces HBM traffic. We evaluate the WTConvNeXt configuration across decomposition levels and a broad range of tensor shapes. Despite performing comparable arithmetic, the reference WTConv is substantially slower than the depthwise convolution it replaces. Our reformulation reduces modeled HBM traffic by approximately $2.55\times$, yielding up to a $4.35\times$ training speedup over the reference while roughly halving peak memory usage. Thus, our reformulation preserves the benefits of WTConv while substantially reducing its execution time and memory footprint, removing the systems overhead that previously limited its practical efficiency.

Industrial device commissioning requires engineers to manually extract hundreds of protocol-specific parameters from heterogeneous PDF manuals and transcribe them into supervisory control systems, a time-intensive, error-prone workflow. This paper presents SysName, a production-oriented pipeline that automates device configuration end-to-end for Modbus RTU, OPC-UA, Profibus DP, and CANopen. It builds a hybrid dense-sparse retrieval index augmented by an ontology graph derived from ECLASS, AAS, and SOSA/SSN, using a BGE-M3 encoder with a cross-encoder reranker to surface relevant manual passages. A local LLM (T=0.1) generates ontology-aligned JSON-LD configurations via protocol-specific prompts and a four-step repair pipeline. A two-stage abstention gate, combining a reranker-score threshold and an IRI resolution ratio, blocks unsafe LLM invocations and filters low-coverage configurations before SHACL validation. On a gold set of 28 field-level queries, the hybrid retriever reaches 0.96 HitRate@10, and the reranker raises MRR@10 from 0.56 to 0.63 with perfect score separation for abstention. The generator attains field-level F1=0.87 with exact match on 9 of 12 runs. End-to-end runs on an H100 GPU complete in 2.6-6.6s per device with zero unsafe writes and zero silent failures on a five-device benchmark; every unsuccessful run is flagged by abstention or deployment verification. Component-wise evaluation localises the single systematic failure to OPC-UA generation, invisible to end-to-end metrics alone. A case study commissions a physics-simulated Universal Robots UR5e robot from unmodified vendor documentation (254-page manual, 8-page register list, 496 chunks), reaching field-level F1=1.0 over three runs with read-back and joint-consistency verification. An ablation study and comparison with five industrial-LLM systems complete the analysis.

Generating implementation-quality RTL with large language models (LLMs) remains difficult because direct generation must resolve microarchitecture while simultaneously producing and debugging low-level code. We present HINT, an executable hardware-intent intermediate representation layer between behavioral specifications or executable oracles and RTL. HINT makes RTL-relevant microarchitecture explicit, supports pre-RTL checking, and supplies explicit RTL-lowering obligations. We evaluate HINT using both a minimal single-agent flow and a full staged workflow. Across seven operator cases, the HINT-mediated route, with no post-synthesis QoR refinement, produces contract-compliant synthesizable RTL on 7/7 cases; Direct C2RTL and C2HLSC apply to five cases and succeed on 5/5 and 1/5, respectively. Under matched Design Compiler synthesis, HINT reduces area by 5.0%--26.2% relative to five manual RTL implementations and by 8.9%--86.1% relative to five accepted Direct C2RTL results. RealBench AES and SDC, together with a Vortex VPU synthesizing to 561.67k~$μ\mathrm{m}^2$, further demonstrate specification-driven, protocol-rich, memory-rich, and hierarchical designs. In the controlled operator study, the HINT-mediated route shows better observed convergence and avoids the severe implementation-quality degradation seen in several direct-generation results.

Application-specific FPGA accelerators offer substantial performance and energy-efficiency gains across many application domains, but developing them is costly, often requiring months of specialized effort. Even with high-level synthesis (HLS), designers still need extensive hardware expertise to build high-performance accelerators. Although large language models (LLMs) have demonstrated strong software-generation capabilities, even frontier models lack the hardware intuition and procedural knowledge needed to reliably translate baseline C/C++ programs into high-performance HLS designs: they struggle to identify effective architectures, follow the optimization processes used by HLS experts, and apply hardware transformations consistently across diverse kernels. We present HLSmith, an expert-guided framework for translating C/C++ programs into optimized HLS accelerators. HLSmith combines three components: an HLS optimization expertise library that encodes guarded transformation recipes, their applicability and prerequisite conditions, and unsafe cases to avoid; a staged, feedback-driven orchestration flow modeled on expert HLS development practice that guides agents through synthesis, bottleneck analysis, and optimization; and a tool-grounded model-adaptation pipeline that converts optimization trajectories from commercial frontier models into training data for fine-tuning open-weight LLMs. We evaluate HLSmith on PolyBench against ChatHLS, a leading prior agent-orchestration framework for HLS accelerator development. HLSmith achieves a geometric mean speedup of 4.24x over ChatHLS while producing functionally correct designs, in both software and RTL simulation, for every benchmark, compared with ChatHLS's 57% valid-design rate. It further reaches speedups of up to 252x and 138x with commercial frontier models and open-weight models, respectively.

The semiconductor industry is undergoing a dual revolution: the shift toward heterogeneous 2.5D chiplet systems and the integration of Large Language Models (LLMs) into Electronic Design Automation (EDA) flows. While these paradigms offer unprecedented benefits in yield, modularity, design productivity, etc., they radically expand the hardware attack surface. This paper provides a unified analysis of these frontiers, ranging from attacks on chiplet systems (including hardware stacks for LLM acceleration) across architectural, logical, and physical levels, to various exploits against LLM-driven EDA pipelines. To secure chiplet systems, we review a powerful defense approach that leverages 2.5D split manufacturing and active interposers for physically isolated Root of Trust (RoT) architectures. To secure LLM-driven EDA pipelines, we first identify native threats and then review state-of-the-art defense techniques. Finally, we discuss how LLM systems can advance hardware security efforts for modern systems, including chiplets.

Large language models have shown promise for automated Verilog RTL generation, yet state-of-the-art multi-agent systems plateau at ~95% accuracy on standard benchmarks. We trace this ceiling to an incomplete debugging action space: existing systems restrict which signals the agent can inspect, which time windows it can query, or both, reducing debugging to pattern matching on a narrow, predetermined view of circuit behavior rather than hypothesis-driven root-cause analysis. We present VeriTrace, a multi-agent system whose Inspector agent operates over a complete debugging action space, with independent control over signal selection, time-window bounds, and iteration depth. This capability, which we term Agentic Temporal Exploration, enables the agent to form hypotheses about failure causes, query the waveform for evidence, and refine its understanding iteratively, mirroring the exploratory process of human verification engineers. VeriTrace achieves 100% Pass@1 on VerilogEval-V2, the first system to attain perfect functional correctness on this benchmark. On a shared Claude Sonnet 4.0 backbone, VeriTrace outperforms the strongest reproduced baseline by +5.1%, demonstrating that debugging agency closes the final accuracy gap.

Kernel generation for hardware accelerators such as GPUs and NPUs has become a proving ground for large language models (LLMs), and state-of-the-art systems raise correctness through pipelines that couple LLMs with agentic reinforcement learning and evolutionary search. Such pipelines generate, compile, and execute large numbers of candidate kernels, discarding most of them and forgoing the opportunity to distill failures into reusable knowledge. Many discarded candidates are near-miss operators that compile and run but fail numerical validation; each embodies genuine domain knowledge and a nontrivial investment in LLM inference, cross-compilation, and hardware execution. We argue for a paradigm shift: rather than regenerate, debug. Debugging is far more constrained than generating from scratch: the search space is small and feedback is dense. We present a domain-specific debug agent that addresses three core challenges in autonomous repair: mitigating knowledge scarcity through retrieved patterns and diagnostic instrumentation, ensuring integrity through anti-cheat detection and full-coverage evaluation, and controlling cost via convergence guards and bounded iteration. Debugging serves two complementary roles: it extends the capability frontier by recovering operators that repeated regeneration fails to produce, and it lowers cost per deliverable operator. Debug Pass@1 achieves 66.7% versus Regenerate Avg Pass@1's 25.9% and Regenerate Pass@3's 40.7%, while consuming 92.8% fewer tokens per success than three-trial regeneration. Component ablations show that the knowledge base drives recovery, while integrity gates reject 12.5-33.3% of the successes the workflow itself accepted.

Can large language models generate not just correct, but fast hardware? This paper investigates the question in financial FPGA design, where 5-10 nanoseconds of latency determines competitive advantage and designs iterate continuously as protocols, strategies, and regulations evolve. FinHardBench, a benchmark of 33 financial computing tasks, is presented together with three experiments that mirror the real-world FPGA iteration cycle: generating new modules from specifications, tuning system-level configurations across a 6-stage trading pipeline, and adapting existing modules to specification changes. Evaluation of six LLMs on 1530+ experiment rounds yields three findings: (1) models achieve 19-61% functional correctness with timing degradation up to 13.7$\times$ on specific tasks; (2) in system-level design space exploration, top LLMs converge to the optimal configuration with higher reliability than random search, simulated annealing, and Bayesian optimization baselines (5/5 seeds vs. 0-4/5 at the same 24-round budget); (3) strategy-level specification changes remain unsolved for most models. Across the six models, generation and DSE rankings overlap moderately: the strongest code generator is not the fastest architecture optimizer, and the weakest code generator (MiniMax M2.7) still reaches the system optimum on 4 of 5 seeds. On the tasks in FinHardBench, difficulty tracks training data pattern availability more closely than abstraction level. FinHardBench is released as an open-source benchmark.

Training large language models (LLMs) to write register-transfer level (RTL) requires large corpora of paired specifications and code, and such data is scarce enough that most public corpora are now synthesized. Synthesis provides scale but not correctness, and in two widely used RTL datasets only 24.4% and 53.5% of pairs pass generated functional tests. This raises the question of how much of such a corpus to keep and which part of it. Correctness alone is a poor answer. A pair that misbehaves in one corner case still shows valid syntax and interface conventions, and complex sequential designs are both harder to generate and harder to validate, so filtering by correctness leaves a corpus of short and simple modules. Correctness is also hard to obtain, since behavior leaves little trace on the surface in RTL, and validating an entire corpus only sorts pairs into passed and failed. We present RTLCurator, which learns a behavior-aware compatibility prior by contrasting each specification with implementations that fail simulation, and calibrates it to a new corpus using a small number of validated pairs. It then constructs the retained subset by balancing alignment, representation coverage, and RTL structural richness. On CodeV and RTLCoder, keeping 80% of the corpus this way improves on training with the full corpus across all reported metrics while validating only 10% of the pool, whereas ranking by the score alone falls below random selection and filtering the whole pool by simulation does no better.

Large language model (LLM) agents optimize the power, performance, and area (PPA) of register-transfer-level (RTL) designs by iterating over edits, synthesis, and PPA analysis, paying a dollar cost for every LLM call. Prior agents report the quality reached without its normalized cost, attribute that quality to an engineered cross-design memory, and hold the reasoning effort of every call fixed. We propose Ares with three corresponding innovations. (1) We introduce a normalized dollar cost per LLM call reported alongside the figure of merit (FoM), enabling fair comparison across effort levels and optimizers. (2) Using this accounting, we find the construction of the long-term memory matters little. An engineered memory brings no dependable gain over a plain concatenation of the same experience. (3) We instead adapt the per-call reasoning effort by escalating to deeper reasoning only once progress at a lower effort stalls, via a patience counter fit on 21 training designs, allocating reasoning where it pays rather than uniformly across all iterations. On three test designs unseen during training, the effort policy lowers the FoM by 23-27% where the best fixed effort reaches 16-23%, at equal normalized cost. Ares closes up to 83% of the gap from an LLM-drafted multiply-accumulate unit to its highly hand-optimized counterpart, and reaches a 25% deeper FoM than state-of-the-art Dr. RTL at 12% of its tokens.

This project aimed to develop a novel reservoir compute (RC) implementation framework targeting high-speed operation and integration with CMOS digital logic. With the target workload of branch prediction (BP) for multistage pipelined central pro-cessing unit (CPU) cores. For this, a novel memristor based RC design framework was developed within the context of the workload requirements. This was then implemented in simulation using industry standard modelling languages of System Verilog (SV) and Verilog-AMS (VAMS).The developed RC design framework was subsequently verified using a basic sequence detection task before further benchmarking for its effectiveness at BP. The developed RC framework was tested using the Dhrystone performance benchmark, while targeting the RISC-V RV64GC instruction set architecture (ISA). Conducted testing demonstrates that RC shows great promise for ap-plication to BP and is capable of achieving impressive overall prediction accuracy. However, testing also shows that further refinement of the developed RC design framework is necessary to address shortfalls in the adaptability of the proposed RC system. As comparison against the state of the art TAGE predictor showed the proposed RC design framework to be 15x slower to adapt to changes in branching behaviour.

Functional verification dominates integrated circuit (IC) front-end engineering effort, and a single missed bug that escapes to silicon can trigger a costly respin. Recent large language models (LLMs) offer new opportunities to automate this process, yet existing LLM-based approaches generate each component through independent single-turn calls with no shared context, leaving interface mismatches undetected and reported coverage disconnected from specification requirements. To address these challenges, we present GoGoTB, an agentic framework that achieves end-to-end verification closure through three subsystems: an agentic execution control layer, an evolvable knowledge system, and specification-grounded coverage closure. The execution control layer separates deterministic enforcement from LLM reasoning at every tool and stage boundary. The knowledge system dispatches methodology and design-specific expertise on demand. The coverage framework anchors every bin to a named specification behavior so that each residual gap has a diagnosable root cause and a targeted remedy. Tested on 8 register transfer level (RTL) designs without any human intervention, GoGoTB achieves 100% environment generation success and averages 98.4% line, 97.2% branch, 97.0% toggle, and 83.2% functional coverage. No prior work successfully generates a complete verification environment or achieves meaningful coverage on the same benchmarks.

This paper presents ContractHIL-HLS, a contract-aligned multi-agent workflow for practical high-level synthesis (HLS) engineering. The workflow makes three contributions. First, it introduces a structured contract as the semantic-alignment and task-execution artifact that translates natural language requirements into explicit interfaces, constraints, validation checks, and rollback rules. Second, it incorporates hardware information into the feedback loop by feeding HLS, Vivado, PYNQ runtime, power, and failure evidence back into generation, thereby extending LLM-assisted HLS from kernel code toward system- and board-level closure. Third, it decomposes agents by semantic lowering and execution tasks rather than by conversational roles: a Contract Agent lowers natural language into the contract, an HTML Agent renders the contract as persistent structured HTML, and a Hardware-in-the-Loop Agent implements and revises the design with measured evidence. We evaluate ContractHIL-HLS in two parts. On 94 locally executable HLS-Eval tasks, the structured contract provides the largest small design gain, improving the estimated single-sample testbench pass rate from 64.0% to 70.2%; the full flow reaches 70.4% pass@1 and 76.6% pass@5. Because HLS-Eval does not exercise board-level design, we also validate ContractHIL-HLS on a board tested ML-KEM/ML-DSA post-quantum cryptography (PQC) secure-message accelerator, where the retained dual-bitstream organization reduces six-message average text runtime from 207.3 ms to 52.4 ms with positive routed WNS on both images while preserving decrypted-message verification. We open-source our work at BJUT-CS316-LAB/ContractHIL-HLS (https://github.com/BJUT-CS316-LAB/ContractHIL-HLS).

We report the design and end-to-end verification of first-class IEEE-754 binary32 (FP32) and bfloat16 (BF16) arithmetic for ARCH, a hardware description language intended to be generated by language models. Every operator - comparisons, conversions, add, sub, mul, and fused multiply-add (FMA) - is described once against a single bit-vector IR and rendered three ways from one source: synthesizable SystemVerilog, an SMT-LIB model, and a Lean 4 proof model. The three artifacts cannot drift apart structurally, and the residual per-node printer correspondence is machine-checked: a Yosys-to-SMT miter proves the emitted SystemVerilog equivalent to the SMT model for all 24 operators. Verification splits at the solver-tractability frontier: multiplier-free operators (comparisons, add/sub over all 2^64 inputs, conversions, and all binary BF16 arithmetic) are proved exhaustively equivalent to the SMT-LIB FloatingPoint theory; the SAT-hard multiplier-bearing operators (FP32 mul and FMA) are proved correctly rounded in Lean, sorry-free, against a value-level round-to-nearest-even specification over exact dyadic values. Physical characterization exposed the FMA as the timing outlier: its exact-wide 470-bit datapath does not pipeline in our flow. We reimplemented it as a bounded 98-bit guard/round/sticky datapath that pipelines to 268 MHz on Nangate45, and proved, in Lean and over all 2^96 inputs, that it is bit-identical to the exact-wide reference, so it inherits the reference's proven correct rounding. The equivalence is tractable precisely because the shared multiplier appears on both sides and cancels: neither a SAT solver nor the proof ever solves a multiplier equivalence. (The BF16 FMA is deliberately an FP32-accumulating fusion, characterized as exactly that.) All machine-checked claims are pinned to a tagged open-source release.

Large language models (LLMs) show promise in code generation, but their capabilities to produce correct, synthesizable hardware description language (HDL) code still remain to be properly benchmarked. Existing evaluations are primarily relying on pass@k metrics and lack proper end-to-end toolchain validation. This paper presents a reproducible benchmarking platform that evaluates open-source LLMs on Verilog RTL generation across 50 curated tasks consisting of combinational, sequential, finite state machine (FSM), and mixed designs. The pipeline consisting of constrained prompting, post-processing, and semantic-aware iterative refinement with waveform analysis, formal equivalence verification, and Abstract Syntax Tree (AST)-based repair validates the generated code via Verilator compilation and Icarus Verilog simulation. Across the 12 benchmarks and the 1,610 total runs evaluating three models of different sizes (Llama-3-8B, StarCoder2-7B, and TinyLlama-1.1B), the pipeline improved syntax validity from 0% to a 70.43% average and simulation pass rate to 51.8% across three open-source models. Most notably TinyLlama (1.1B parameters) achieved the highest individual syntax validity at 80.0%, with functional correctness comparable to the 8B model. The platform and dataset are open-source, enabling reproducible evaluation of generative AI for hardware design workflows.

Expensive simulation-driven design is widely used in engineering to identify requirement-satisfying designs with as few high-fidelity simulations as possible. Most existing efforts address this challenge by improving optimization algorithms under fixed formulations, yet the formulation itself shapes the search landscape by defining the objectives and constraints optimized by the solver. Recent LLM-based automatic problem formulation methods generate formulations from natural-language requirements, but they mainly focus on design-intent alignment and overlook whether the formulation induces an efficient search process. To address this limitation, we propose SHA-PF, a search hardness-aware LLM-based problem formulation framework. We find that a formulation is more likely to guide efficient search when it prioritizes rare samples with greater progress potential. Based on this finding, SHA-PF defines a formulation search objective guided by search hardness, scoring each candidate formulation according to the priority. SHA-PF then searches the formulation space under this objective through LLM-based generation, repair, and evolutionary refinement. Experiments on the real-world multi-objective benchmark and five expensive antenna design benchmarks show that the formulations discovered by SHA-PF require significantly fewer evaluations to reach the design requirements than other baselines.

Large language model (LLM) agents are extending electronic design automation (EDA) beyond static RTL generation toward long-horizon, tool-interactive workflows. Yet it remains unclear whether general-purpose coding agents, even with domain-specific EDA skills, can reliably execute an end-to-end RTL-to-GDS flow encompassing synthesis, physical implementation, and engineering change order (ECO) optimization. We evaluate AI agents on a PicoRV32 RTL-to-GDS flow using commercial EDA tools under two timing targets. Their performance is assessed using end-to-end design score, stage completion, and Token ROI, a cost-efficiency metric relating design quality to runtime and cost. Comparing three agent architectures and four foundation models, we derive three practical lessons. First, domain-specific skills improve agents' understanding of individual subtasks but do not ensure reliable completion of a long-horizon EDA flow. Second, agents that achieve similar design progress can still differ by up to 141 times in Token ROI, revealing substantial differences in runtime and cost efficiency. Third, low-level tool-interface mismatches are a major source of physical design failures, particularly when Tcl commands depend on the tool version or execution mode. These results suggest that robust Agentic EDA requires not only stronger models but also structured tool interfaces, persistent design context, controlled execution, and process-level evaluation.

The rapid advancement of large language models (LLMs) has led practitioners to increasingly rely on them for answering questions about hardware description languages (HDLs). Because HDL is ultimately synthesized into physical hardware, an imprecise or redundant answer can propagate into timing violations or non-synthesizable logic that surface only late in the design flow, making the quality of HDL answers especially consequential. However, the quality of LLM-generated responses, particularly in comparison with answers provided by human experts, remains unclear. To investigate this question, we collect 6,246 HDL Q&A posts with accepted answers from Stack Overflow and curate them into a dataset, organized into a taxonomy of four main categories (Conceptual, Debugging, Generation, and Optimization) and ten subcategories. Using this dataset, we design a user study conducted with 19 HDL engineers with one to three years of experience. Our findings reveal a pervasive over answering tendency: LLMs supply correct content but bury it under redundant alternatives (65.7%) and verbose padding (69.1%), while nearly half of answers (49.0%) fail to fully align with expert answers yet participants still preferred LLM responses for readability (58.3%). Motivated by these findings, we propose a multi-agent framework for improving LLM-based HDL question answering. We evaluate answer quality using an LLM-as-Judge and two structural metrics: the number of core answers, which reflects redundancy since LLMs often provide multiple alternative solutions, and the length of non-core content, which reflects verbosity. Evaluated on the four mainstream LLMs, our framework increases the average core-answer quality score from 3.71 to 4.67 (+0.96) and the non-core content quality from 3.72 to 4.23 (+0.51), on a five-point scale.

Hardware engineering exposes coding agents to a form of long-horizon work that is difficult to capture with pass-at-k: progress is continuous, tool feedback is delayed and heterogeneous, and a backend failure may require revising RTL rather than tuning another physical-design parameter. Existing benchmarks measure RTL generation, repository repair, verification, PPA evolution, or physical implementation, but their different designs and oracles make it hard to determine where an agent succeeds or fails across abstraction boundaries. We introduce CLOSER-Bench, a controlled evaluation protocol for budgeted cross-stage design closure. For one design and one hidden objective, it pairs spec-to-RTL, RTL-to-GDS, and spec-to-GDS tasks, records every simulator, synthesis, STA, and place-and-route invocation, and measures final quality, anytime progress, tool cost, and cross-stage recovery. The benchmark is built on open-source Verilator, Yosys, OpenROAD, KLayout, Sky130, and the Harbor agent harness. A ten-task pilot spanning RTL repair, mutation-based verification, coverage, PPA optimization, design-space exploration, cross-model debugging, and security establishes the executable harness and exposes a sharp completion--closure gap: three agents solve a localized AXI repair task, while the matched verification-closure task separates a frontier agent from two otherwise successful baselines. We further validate a full RTL-to-GDS flow and construct a macro-based AXI/DMA streaming accelerator for the stage-paired evaluation. These results motivate treating hardware closure as a budgeted sequential decision problem rather than a collection of independent code generation tasks.

Large-scale AI datacenter platforms comprise thousands of heterogeneous hardware components whose validation requires comprehensive fault injection test plans. Today these plans are authored manually: engineers review hardware self-healing validation documents and bills of materials, enumerate failure modes per field-replaceable unit, and produce flat lists of single-layer test cases. This process is labor-intensive, error-prone, and dependent on institutional knowledge; coverage gaps surface late, traceability to source specifications is implicit, and the effort is largely repeated per platform. This paper presents a generative AI multi-agent architecture that automates the generation of structured hardware validation test plans from two canonical inputs: self-healing validation documents, which enumerate known failure modes and their detection and remediation behaviors per field-replaceable unit, and component Bills of Material. An ingestion agent normalizes heterogeneous inputs into a canonical representation; a classification agent maps components to functional domains via contextual reasoning over part descriptions and sub-category hierarchies; and a generation agent synthesizes test cases by combining normalized failure modes with domain-classified data, filling gaps and producing edge cases. The output conforms to a standardized schema for direct import into internal validation software. Evaluated on two production platforms against manual baselines, the framework achieves coverage expansions of 74.2% and 51.4%, cutting authoring from days to hours. It yields fully traceable mappings from each test case to its source specification, and its multi-agent decomposition is portable across platform generations. Automated and expert evaluations confirm 100% extraction fidelity and high acceptance of new scenarios, validating the framework as a robust human-in-the-loop force multiplier.

Accurate timing prediction at the register-transfer level (RTL) is a longstanding challenge in design automation. Existing graph-based methods struggle with limited receptive fields, high complexity, and a lack of signal directionality. We present RTL-Sequencer, a novel sequence-based paradigm that enables scalable RTL timing prediction via linearizing logic cones by breadth-first traversal and applying modern linear sequence models. Furthermore, sequence models are customized by four synergistic techniques, including sequence shuffling, bidirectional modeling, differentiable modeling, and a hybrid graph-sequence architecture. Extensive experiments demonstrate significant improvements of RTL-Sequencer over state-of-the-art baselines, advancing early-stage timing optimization.

Video diffusion transformers (vDiTs) generate high quality video but introduce extremely high compute cost due to the long diffusion timesteps and self attention computation. As diffusion timesteps are reduced, the computation cost of self attention becomes the dominant bottleneck. Existing acceleration approaches largely inherit sparse attention techniques from large language models, which fail to consider the unique spatiotemporal correlation of video data. This paper presents Kaleido, an algorithm hardware codesign that accelerates all operations in vDiTs by exploiting channel-wise spatiotemporal correlations in latent space. Based on this insight, we propose a lightweight channelwise reuse algorithm that skips redundant computations by reusing partial results while preserving higher generative quality than prior methods (>17 dB). To efficiently support this algorithm, we design a systolic array like accelerator with reconfigurable processing elements and a lightweight data dispatcher to mitigate irregular sparsity and data access patterns introduced by our reuse algorithm. Evaluations across three mainstream vDiT models show that Kaleido achieves up to 5.9x speedup and 16.0x energy savings over state of the art accelerators.

Symbolic expressions can effectively characterize and predict circuit behavior, but deriving them directly from circuit schematics is challenging. This process requires accurate visual-to-symbolic construction of circuit structure from images and correct multi-step symbolic derivation, both of which impose strict correctness requirements. This work proposes AutoVSR, an automated framework for visual-to-symbolic generation of circuit expressions using Vision Language Models (VLMs). By reconstructing circuit diagrams into an executable intermediate representation (Executable IR) and leveraging a symbolic solver for reasoning, AutoVSR significantly improves the accuracy of symbolic expression generation. AutoVSR introduces two key innovations: an IR construction method guided by component rule retrieval and verification-based feedback, and a symbolic solver implemented as a planning agent equipped with a symbolic tool library for reliable multi-step derivation. Compared with end-to-end VLM approaches and specialized methods on the main symbolic expression generation task, AutoVSR achieves accuracy improvements of 30.01--59.45% and 41.96--51.84%, respectively. Moreover, AutoVSR surpasses closed-source state-of-the-art VLMs in inference cost and computational efficiency. Code is available at https://github.com/LongfeiLi1/AutoVSR.

As chip complexity increases and time-to-market pressures grow, front-end design has become a critical bottleneck in chip development. Recently, Large Language Models (LLMs) have shown great potential in Electronic Design Automation (EDA). Beyond specification understanding, LLMs show the potential to serve as a unified intelligent interface for hardware description language (HDL) generation, testbench construction, and design space exploration. The rise of agentic AI, represented by pioneering systems such as OpenClaw, offers a strategic roadmap for the next generation EDA. From this perspective, this paper discusses the evolution of EDA from localized assistance to autonomous agentic execution. Then, we review representative advances of LLMs in front-end design, focusing on key tasks such as circuit and testbench generation from a shared specification, as well as design quality improvement in established workflows such as high-level synthesis. Finally, we discuss the key challenges and limitations of integrating LLMs into EDA, and outline future opportunities for advancing LLM-enabled front-end design, offering a systematic perspective for researchers interested in leveraging agentic AI technologies for EDA.

High-Level Synthesis (HLS) provides a fast path from concepts to silicon, but converting real-world software into synthesizable HLS code remains challenging due to restrictive language support and the gap between software and hardware programming practices. Existing automated and LLM-based refactoring approaches partially address this problem, yet they often lack flexibility, struggle to scale, and incur high computational costs. We introduce AgRefactor, an LLM-based multi-agent workflow for refactoring software into HLS-compatible programs. AgRefactor incorporates a self-evolving memory system that accumulates and retrieves factual and strategic knowledge across tasks, improving robustness and efficiency on unseen programs. To reduce cost and enhance scalability, it integrates automated refactoring tools, enabling agents to balance LLM-driven rewrites with efficient tool-based transformations. On 9 out of 11 challenging real-world benchmarks, which are 5-10x longer than the most complex cases studied in prior work, AgRefactor outperforms or matches the state-of-the-art automated refactoring tool and a strong LLM-based baseline built on the same framework backbone. Further agentic performance optimization yields a 6.51x geometric mean speedup over the SoTA pragma tuning tool and a 1.20x speedup over optimized open-source designs with less than 20% extra resources. AgRefactor is fully-automated and open-sourced.

Software-compilable C programs routinely fail to complete the four-stage pipeline of a high-level synthesis (HLS) toolchain -- compilation, C simulation (CSim), synthesis, and C/RTL co-simulation (CoSim) -- because HLS accepts only a synthesizable subset of C (HLS-C). Yet most existing large language model (LLM) systems built for HLS code repair only cover the early pipeline stages and feed raw tool logs directly to the model, yielding brittle and hard-to-reproduce fixes. We formulate C-to-HLS-C conversion as a closed-loop generation-verification-diagnosis-repair problem on an HLS tool (Xilinx Vitis), contributing three components: an end-to-end workflow of cooperating agents closed by the four-stage verifier under strict evidence isolation; a Progressive Mismatch Localization Chain (PMLC) that localizes CSim/CoSim mismatches through log normalization, AST backward slicing, and dual-trace instrumentation; and a typed-query, two-stage evidence RAG backed by a self-evolving, family-routed repair-card pool. Experimental results show that the proposed workflow substantially outperforms all comparable state-of-the-art models.

Verilog debugging remains one of the most time-consuming stages in digital circuit design. Recent advances in Large Language Models (LLMs) have enabled automated debugging; however, most existing approaches rely solely on test outputs and compiler feedback in an end-to-end manner, limiting their effectiveness on complex bugs. A key challenge is that the root cause of an error may be far removed from its observable outputs, making it difficult for LLMs to trace long dependency chains in code. This challenge is further exacerbated in large codebases, where long context lengths hinder efficient reasoning. To address these limitations, we propose VeriPilot, an LLM-powered debugging framework that leverages golden reference models to enable fine-grained bug localization and repair. VeriPilot goes beyond output-level comparison by aligning internal variable semantics between the Verilog design and its corresponding golden model through LLM-based analysis. It then performs step-by-step signal tracing using Control-Data-Flow Graphs (CDFGs) derived from static analysis, identifying a minimal set of suspicious code regions along with their correct counterparts from the golden model. These structured insights are subsequently provided to the LLM to guide reasoning and automated code repair. Experimental results on the Comprehensive Verilog Design Problems (CVDP) benchmark from NVIDIA demonstrate that VeriPilot improves the repair success rate of GPT-4o from 54.3% to 85.71%, significantly enhancing both bug localization accuracy and repair effectiveness for complex Verilog designs. The source code and benchmark are publicly available at Github https://github.com/YihanWn/VeriPilot.git.

Fine-grain clock gating (FGCG) is among the most effective techniques for reducing dynamic power, yet current FGCG optimization flows remain largely manual. Recent LLM-based RTL optimization approaches remain limited by two key drawbacks: (1) the inability to process long waveform traces spanning millions of cycles, and (2) the difficulty of scaling optimization to large hierarchical codebases while preserving correctness. In this work, we present AUTOGATE, the first agentic framework for industry-grade RTL power optimization, enabling workload-aware clock-gating optimization across large hierarchical codebases. AUTOGATE introduces a Machine Learning (ML)-LLM co-design that bridges waveform-level analysis and RTL rewriting. Specifically, we design an ML-based clustering algorithm that distills raw toggling traces into compact, structured representations that guide LLM-based RTL rewriting. This enables accurate identification and application of clock-gating opportunities without requiring LLMs to directly process raw waveform data. To enhance scalability, AUTOGATE employs a hierarchical multi-agent architecture that decomposes large designs into independently optimizable modules, enabling coordinated optimization across deep design hierarchies. We evaluate AUTOGATE on a diverse set of designs ranging from small RTL designs to large industrial-grade codebases. Experimental results show that AUTOGATE consistently reduces dynamic power relative to baselines. Across the small-design suite, AUTOGATE reduces dynamic power by 49.31% on average. On industry-scale designs, it achieves 19.34% and 7.96% dynamic power reductions on NVDLA and BlackParrot, respectively, and up to 6.86% on highly optimized proprietary production designs.

Large language models (LLMs) have achieved remarkable success in software development. However, they are susceptible to hallucinations, meaning that they can introduce subtle semantic and logical errors. Due to the high stakes in chip design and manufacturing, hardware engineers are still reluctant to rely on LLMs for register-transfer level (RTL) generation. In this paper, we propose a hardware generation framework that combines the creativity and broad knowledge of LLMs with the explainability and mathematical rigor of formal methods. Specifically, we devise a set of transformation rules that cover various design decisions and hardware features. By iteratively applying these rules, an LLM agent can convert a design specification into an RTL program with guaranteed correctness. Experimental results demonstrate the effectiveness and efficiency of the framework.

Large language models (LLMs) have facilitated impressive progress in software engineering, code generation, tooling, and systems. Concurrently, a significant body of research has developed which explores a growing variety of methods and systems for applying LLMs to hardware and chip design (e.g., systems for RTL code generation based on functional description). However, when it comes to open Verilog/RTL code-generation, we need high-quality training samples to build specialized and more effective LLM systems through fine-tuning or low-rank adaptation. Here, we propose a ``judge-renew-check-renew-check'' (JRCRC) pipeline which updates a current public dataset using a hierarchy of state-of-the-art commercial LLM models differing in their costs and capabilities in RTL code generation. This approach achieves a cost-effective mechanism for filtering and refining code-generation samples into a higher-quality training dataset. Our experiments also identify some common weaknesses of LLMs in rule-based reasoning and logic, and consequently, in RTL code-generation. Having identified these weaknesses, we develop an architecture for incorporating pre-processing tools to dynamically assist the LLMs in inferring logical relationships from tabular data formats. With our tools-assisted architecture for RTL code generation, we achieve significant overall performance gains in the VerilogEval benchmark and outperform many state-of-the-art methods. Our LLM4RTL system achieves performance comparable to that of GPT-4O using a significantly much smaller LLM.

Large Language Models (LLM) have shown impressive capabilities in Register Transfer Level (RTL) code generation, particularly for Verilog. However, evaluating their performance with other Hardware Description Languages (HDL), especially VHDL, remains limited although its distinct language characteristics, such as stricter semantic rules, introduce evaluation considerations that differ from Verilog. This lack of coverage restricts fully understanding of how well current models generalize across hardware design languages with differing structures and semantics. To address this gap, we introduce VHDLSuite, a benchmark-centered infrastructure for scalable VHDL generation evaluation, integrating automated benchmark synthesis, executable validation, and multi-model diagnostic analysis. First, we propose a data pipeline that automatically converts Verilog designs and their accompanying testbenches into executable VHDL benchmark instances, followed by VUnit/GHDL-based validation to ensure each released task is compilable, runnable, and consistently checkable in the VHDL environment. Second, we introduce VHDLBench, a benchmark with over 200 VHDL problems with complete and validated testbenches across a wide range of complexity levels. Third, we extensively evaluate cutting-edge LLMs and uncover key challenges specific on LLM-aided VHDL generation. Our findings provide important insights and support future work in multi-language hardware design automation.Our data pipeline, benchmark, and evaluation framework will be open-sourced.

Automated testbench generation has become a critical bottleneck in large language model (LLM)-driven Register Transfer Level (RTL) workflows, where large numbers of candidate designs must be verified rapidly and reliably. Existing prompt-based approaches treat testbench generation as unconstrained code synthesis, yielding stochastic outputs with high token cost, low reproducibility, and insufficient coverage. To address this gap, we present STG, a Structured Testbench Generation framework that exploits the inherent structure of hardware designs to generate deterministic testbenches. As a direct verification tool, STG runs 720x faster than an iterative LLM-based testbench generation flow and higher rate of successful compilation, achieves higher coverage, and reduces false-pass verdicts on incorrect DUTs. STG also helps identify errors in RTL generation benchmarks by exposing faulty benchmark testbenches. As a data curation engine, it is 11x faster than LLM-based filtering on a single CPU core with 127x less energy, and the resulting distilled models provide state-of-the-art performance in our multi-benchmark evaluation. As a test-time scaling oracle, it reduces node count by 14-47%. Our models are available at https://huggingface.co/collections/AS-SiliconMind/siliconmind-v12.

OpenRTLSet introduces the largest fully open-source dataset for hardware design, offering over 131,000 diverse Verilog code samples to the research community and industry. Our dataset uniquely combines Verilog code from GitHub repositories (102k modules), VHDL translations (5k modules), and synthesizable C/C++ translations (24k modules), all freely accessible without proprietary restrictions. Using the reasoning model DeepSeek-R1, we generated paired natural language descriptions for each code sample, enabling fine-tuning of various language model families (e.g., Qwen and Granite) for Verilog code generation. Our dataset explores multiple options, including Verilator-generated C++ files as additional context during labeling, quantization techniques (INT4 vs. BF16), and performance differences across model sizes (7B-32B parameters). OpenRTLSet demonstrates that open-source approaches can achieve superior performance in hardware design tasks, establishing a new foundation for accessible research and commercial use in this domain.

Spiking Neural Networks (SNNs) provide a naturally temporal machine-learning framework. Their neurons maintain an internal state and propagate information through discrete spikes, enabling low-latency temporal inference. Although SNNs are often associated with asynchronous neuromorphic processors, many scientific real-time inference systems rely on conventional synchronous field-programmable gate arrays (FPGAs) and high-level synthesis (HLS) workflows. In this paper we present an extension of hls4ml that enables clock-driven deployment of SNNs trained in pytorch onto FPGA firmware. We demonstrate the workflow using a dense quantised SNN trained on the Heidelberg Spiking Digits dataset where it achieves inference latencies of approximately $34μ$s. We validate the generated design through software reference comparisons, HLS C simulation, HLS synthesis, export, and Vivado synthesis reports. This work opens up the hls4ml toolkit to neuromorphic computing, allowing streamlined optimisation, synthesis, and deployment of SNN models for real-time inference.

LLM-based RTL generation and reasoning is a promising direction for hardware design automation. High-quality benchmarks are critical infrastructure for tracking progress in this direction. However, existing RTL benchmarks face inherent limitations in both scale and task scope. The designs they cover are typically small and simple, and the tasks focus almost entirely on specification-to-RTL generation. Frontier models' performance already saturates on the existing benchmarks. Scaling these benchmarks up is fundamentally difficult because aligned labels are required for benchmarking, such as specifications and testbenches. Such aligned high-quality data are rarely available for real-world designs. We introduce RTL-BenchLS, a large-scale benchmark addressing both limitations above. It contains over 10,000 formally verified Verilog designs, covering substantially larger and more complex designs than existing benchmarks. Beyond specification-to-RTL generation, we propose three novel tasks that jointly evaluate reasoning and generation: round-trip reasoning, masked-content reasoning, and repository-issue reasoning. The first two are self-supervised, which directly resolves the scaling bottleneck. All tasks are verified through formal equivalence checking without any manual testbenches. We evaluate eight LLMs on RTL-BenchLS. Even the best model reaches only 23% on natural-language round-trip reasoning, 28% on masked-content reasoning, and 12% on repository-issue fixing. RTL-BenchLS is substantially more challenging than existing benchmarks. It leaves ample room for future improvement and offers guidance for developing LLM-based methods for hardware design.

Large language models (LLMs) have shown promise in code summarization, yet their effectiveness for Hardware Description Languages (HDLs) like VHDL and Verilog remains underexplored. We propose ROSUM-MCTS, an LLM-guided approach inspired by Monte Carlo Tree Search (MCTS) that refines summaries through structured exploration and reinforcement-driven optimization. Our method integrates both local and global context via a hierarchical candidate expansion mechanism and optimizes summaries using a composite reward function balancing functional correctness (FC), local content adequacy (LCA), and fluency. We evaluate ROSUM-MCTS on the VHDL-eval and Verilog-eval datasets, demonstrating its consistent outperformance over baseline methods by leveraging structured bottom-up refinement and reinforcement-based optimization. Ablation studies confirm the necessity of both local and global expansion strategies, as well as the importance of balancing FC and LCA for optimal performance. Furthermore, ROSUM-MCTS proves robust against superficial modifications, such as variable renaming, maintaining summary quality where baselines degrade. These results establish ROSUM-MCTS as an effective and robust HDL summarization framework, paving the way for further research into reinforcement-enhanced code summarization.

Recent advances in large language models (LLMs) have enabled the automatic synthesis (generation) of register-transfer level (RTL) code from natural language instructions, offering a promising pathway to accelerate chip design. Unlike typical natural language (and software coding) tasks, LLM-based RTL code generation demands strict cycle accuracy with concurrency, where minor logical errors can render a circuit unusable or insecure. While prior work has explored hallucination mitigation via external verification, self-evaluation prompts, retrieval-augmented prompting, domain specific fine-tuning, agentic solutions, and reasoning, these approaches largely overlook the attention-oriented internal mechanisms of LLMs that may inherently correlate with RTL correctness. This work proposes CASS-RTL, a first-of-its-kind framework for discovering and leveraging LLMs' correctness-aware components to guide RTL generation toward functionally accurate outputs. We (i) identify attention heads whose activation patterns consistently differentiate correct from incorrect RTL; (ii) construct a low-dimensional subspace capturing correctness-relevant signals; and (iii) design a lightweight, geometry-aware intervention that steers the model at inference time. CASS-RTL is fully model-agnostic, requires no additional supervision or retraining, and readily integrates into existing models. Empirically, we evaluate CASS-RTL on multiple models and observe 10%-20% improvement in pass@1/5/10 accuracy on VerilogEval and 5% improvement on CVDP, demonstrating the effectiveness of our method in enhancing reliability without sacrificing model efficiency or requiring a large labeled dataset for fine-tuning.

Large language models (LLMs) have shown increasing promise in generating functionally correct register-transfer-level (RTL) hardware designs. Recent systems improve further through EDA-integrated reinforcement learning with syntax, simulation, and PPA rewards, but train a general RTL generator before deployment while test-time approaches search with a frozen policy. We instead perform reinforcement learning at test time, allowing the LLM policy to adapt to executable EDA feedback for the specific RTL problem at hand. We propose TTT-RTL, to our knowledge the first per-design test-time training framework that closes the loop between an LLM policy and an EDA pipeline for RTL optimization. TTT-RTL samples candidate implementations, verifies them through syntax checking and simulation, scores valid designs using synthesis-derived PPA product, reuses high-reward variants through a PUCT-indexed design-state pool, and updates the policy with an entropic policy-gradient objective. To stabilize policy updates under sparse or plateaued rewards, we introduce an adaptive KL-budget controller that adjusts the entropy constraint using reference KL, effective sample size, and reward saturation signals. On RTLLM v2.0 under Nangate 45nm, TTT-RTL reduces the geometric-mean PPA product by 65.1% over the reference, outperforming the strongest published frozen-policy agent baseline at 26.1%. On an industrial XuanTie C910 FPU leading-zero-anticipation unit under Sky130, TTT-RTL achieves a 59.4% ADP reduction, and ablations confirm that policy adaptation, state reuse, and KL-budget control each contribute. These results suggest that test-time training with executable EDA feedback can move LLM-based RTL generation beyond functional correctness toward physically optimized hardware.

Automatic generation of RTL code for digital hardware designs remains challenging due to long-horizon reasoning, multi-step dependencies, and strict correctness constraints in Verilog and VHDL. We present StepPRM-RTL, a novel framework that combines stepwise trajectory modeling, process-reward modeling (PRM), and retrieval-augmented fine-tuning (RAFT) to enhance both the functional correctness and reasoning fidelity of LLM-based RTL code generation. StepPRM-RTL constructs stepwise reasoning trajectories from canonical solutions, where each step contains a rationale and incremental code modification. A Process Reward Model (PRM) evaluates intermediate steps, providing dense feedback that guides reinforcement-style updates during RAFT fine-tuning. Monte Carlo Tree Search (MCTS) explores alternative reasoning paths, enriching the training dataset with high-quality trajectories. This integration of stepwise and outcome-aware rewards allows the model to learn both how and why to construct correct RTL, improving long-horizon reasoning beyond standard supervised or outcome-based training. Experimental evaluation on benchmark Verilog and VHDL datasets demonstrates that StepPRM-RTL outperforms the best prior methods by over 10% in functional correctness and reasoning fidelity metrics. Ablation studies confirm that the combination of PRM-guided rewards and stepwise trajectory exploration is key to its performance. StepPRM-RTL generalizes across RTL languages and provides a scalable framework for high-fidelity, interpretable code generation, establishing a new standard for LLM-assisted hardware design automation.

We introduce HighTide, an evolving AI-assisted benchmark suite. Specifically, the contributions are: (i) a diverse open-source suite spanning multiple design languages and technology nodes, (ii) Bazel-based incremental RTL-to-GDS compilation with remote caching, (iii) AI-assisted design curation through twelve agent skills covering the design lifecycle, flow optimization, tool reference, and meta-maintenance, backed by per-design decision logs that serve as long-term memory of tuning rationale across the suite, and (iv) an infrastructure with RTL compilation verification for stable releases. The suite is publicly available and designed to grow with the open-source hardware ecosystem.

Recent unified audio generation models can support diverse tasks across speech, sound effects, and music, but most of them still focus on isolated task-level synthesis. However, real video production often requires multiple components of a complete audio track to be generated jointly and consistently for the same video. We present Foley-Omni, a unified multimodal audio generation model that extends isolated task-level synthesis to complete video soundtrack generation by jointly modeling speech, sound effects, and music within a shared latent generation process. To support training and reproducible evaluation, we develop an audiovisual data curation pipeline and introduce V2ST-Bench, a benchmark for holistic video soundtrack generation evaluation. Experiments show that Foley-Omni achieves competitive performance with expert systems on individual synthesis tasks, while improving speech intelligibility, audiovisual consistency and perceptual quality for mixed soundtrack generation.

Optimizing register transfer level (RTL) code is of vital importance in hardware design. Large language models (LLMs) provide new methods for the automatic generation and optimization of RTL code, offering the potential to significantly accelerate the design process and reduce human effort. However, existing methods for generating RTL code often focus on model fine-tuning and the use of various expansion techniques to enhance the RTL code generation capabilities, lacking attention to the functional correctness. Ensuring that the generated RTL code not only compiles successfully but also behaves as intended in real hardware implementations remains a critical challenge. To address this issue, we propose EstRTL, an LLM-powered collaborative agent framework for RTL code generation based on static functional score estimation. EstRTL operates a three-stage paradigm: Generation, Estimation and Correction. During the stages, the functional estimation agent statically evaluates the generated code based on score and assessment results, and decides whether to output the code directly, return it for regeneration, or forward it to the code correction agent. This framework can be applied to various LLMs that designed for RTL code generation, further enhancing the correctness of the generated code. By providing quantitative scores and human-readable requirements comparisons, it improves the transparency of AI-assisted RTL code generation. Experiments show that EstRTL significantly improves the correctness of RTL code generation by generic LLM by 3.2%-9.0%, demonstrating the practical value of our system. The codes and experimental results are open-sourced at link: https://anonymous.4open.science/status/EstRTL-E200/.

Developing effective representations for register transfer level (RTL) designs is crucial for accelerating the hardware design workflow. Existing approaches, however, typically rely on a single data modality, either the RTL code or its associated graph-based representation, limiting the expressiveness and generalization ability of the learned representations. For RTL, the control data flow graph (CDFG) offers a comprehensive structural representation that preserves complete information, while the code modality explicitly encodes semantic and functional information. We argue that integrating these complementary modalities is essential for a thorough understanding of RTL designs. To this end, we propose UniRTL, a multimodal pretraining framework that learns unified RTL representations by jointly leveraging code and CDFG. UniRTL achieves fine-grained alignment between code and graph through mutual masked modeling and employs a hierarchical training strategy that incorporates a pretrained graph-aware tokenizer and staged alignment of text (i.e., functional summary) and code prior to graph integration. We evaluate UniRTL on two downstream tasks, performance prediction and code retrieval, under multiple settings. Experimental results show that UniRTL consistently outperforms prior methods, establishing it as a more robust and powerful foundation for advancing hardware design automation.

Large language models (LLMs) have improved Verilog generation from natural-language specifications, but most pipelines still treat generation as isolated sampling followed by functional checking. This is insufficient for practical RTL design, where useful Verilog must be correct, synthesizable, timing-conscious, and friendly to downstream hardware objectives. We present Verilog-Evolve, a feedback-driven framework for versioned Verilog refinement and cross-session skill evolution. For each task, Verilog-Evolve generates diverse minor candidates, evaluates them with executable feedback from functional simulation, Yosys synthesis, ABC timing proxy, and optional GEMM metrics, then promotes the best candidate into a major version under configurable scoring. To improve across tasks, the system maintains modular skill guidance, retrieves skills according to task and feedback context, and evolves candidate skills from logged histories through create/improve/skip decisions and verifier reports. Experiments on VerilogEval and mixed-precision GEMM tasks show that Verilog-Evolve improves final functional success and promotion stability while producing more downstream-friendly RTL under open-source synthesis, timing-proxy, and netlist-level GEMM objectives. Validation-gated skill evolution further improves GEMM downstream quality and achieves the best downstream score and GEMM held-out pass rate among the evaluated skill modes.

The deployment of Large Language Models (LLMs) and Vision Transformers (ViTs) on edge devices is significantly constrained by memory limitations and the critical timing bottlenecks introduced by dense Multiply-Accumulate (MAC) arrays. In the ultra-low bit regime, logarithmic Power-of-Two (PoT) quantization provides a hardware-efficient alternative by replacing MAC operations with bit-shifts. However, the non-uniform exponential lattice is inherently limited by a \textbf{Low Angular Resolution Regime}, a structural flaw that becomes particularly pronounced at sub-4-bit thresholds, leading to a notable degradation of high-dimensional feature manifolds. To address this geometric limitation, we propose Geometric Orthogonal Residual Projection Quantization (GoQuant), an algorithm-hardware co-design framework. By formulating quantization as a dual-basis geometric projection, GoQuant adaptively synthesizes a higher-resolution residual lattice using strictly shift-and-add operations. Furthermore, its analytical solver offers a practical alternative to computationally intensive gradient-based optimization, reducing the full-model calibration time for LLaMA-2-7B to approximately 15 minutes. Extensive evaluations demonstrate GoQuant's applicability across modalities and its hardware efficiency. Under the 3-bit (W3/A16) constraint, it achieves a perplexity of 6.10 on LLaMA-2-7B, comparing favorably to conventional MAC-intensive baselines like AWQ without relying on asymmetric scaling, while maintaining competitive accuracy in 4-bit scenarios. At the silicon level, standard-cell RTL synthesis at a 28nm node indicates that GoQuant effectively mitigates the timing bottlenecks associated with dense multiplier trees. By flattening the combinational logic depth, our parallel shift-and-add datapath reduces the critical path delay to 0.35 ns.

Complex Verilog Design Problems (CVDP) challenge hardware LLM agents because solving them requires localizing verifier-relevant RTL, testbenches, include paths, and build dependencies inside large repository snapshots, making precise edits, and recovering from sparse hidden-verifier failures. We present Trace2Skill, a test-time scaling framework that improves a hardware agent without RTL-specialized model fine-tuning. Rather than training a new model or only sampling more candidate solutions, Trace2Skill treats the agent's natural-language skill as an evolvable policy. It mines repeated rollout traces for success and failure modes, converts them into dense diagnostics and oracle lessons, and uses an oracle, mutator, and selector loop to produce task-specific skills that guide later search, editing, validation, and recovery. Because final pass/fail labels are often too coarse for hard failures, Trace2Skill also supports bounded runtime dense verifier feedback that returns sanitized functional observations while keeping hidden harnesses and reference solutions inaccessible to the agent. This feedback helps guide skill evolution and agent execution by connecting skill text, verifier evidence, and downstream behavior. Across hard CVDP tasks that defeat the seed CVDP agent, including tasks that also defeat frontier coding agents, Trace2Skill with dense verifier feedback substantially improves task pass rates and produces breakthrough passes on previously unsolved tasks, without requiring high-quality fine-tuning data, specialized RTL model training, or model weight updates. The same framework provides a general test-time scaling strategy that can extend beyond digital design to other verifiable EDA tasks.

Test-time scaling is an important mechanism for improving large language models, especially on tasks with deterministic verifiers. Code translation is a canonical example: the source program constrains valid outputs, while compilers, type check- ers, and behavioral checks provide exact pass/fail feedback. Existing approaches typically apply these verifiers only after generation, which is inefficient because early errors corrupt the autoregressive context and are rarely corrected later. We introduce Decoding Time Verification (DTV), a framework that treats structural boundaries as meta steps for verifier-guided decoding. DTV interleaves generation with verifier calls under a state-machine controller that enforces valid prefixes, using structural-boundary checks and structure-aware rollback to prevent error propagation while reducing wasted tokens. We evaluate DTV on C-to-Rust and JavaScript-to-TypeScript translation. Using Qwen3-4B as the primary generator under matched token budgets, DTV improves pass rates from 72.3% to 82.0% on C-to-Rust and from 33.3% to 46.0% on JavaScript-to-TypeScript relative to matched self-refinement baselines, while using fewer tokens per case; the same trend largely transfers to Gemma-4-E4B. In the evaluated cost-matched grid, DTV achieves a more favorable pass-rate-cost tradeoff than post-hoc verification or sampling-based scaling. These results show that verifier-guided decoding is an effective use of inference-time compute for code translation.

This paper introduces RTL-BenchMT, an agentic framework for dynamically maintaining RTL generation benchmarks. Large Language Models (LLMs) assisted automated RTL generation is one of the most important directions in EDA research. However, current RTL benchmarks face two critical challenges: (1) flawed cases in the benchmarks and (2) overfitting to the benchmarks. Both challenges are difficult to resolve purely by manual engineering effort. To address these issues and systematically reduce human maintenance costs, we propose an automated agentic framework, RTL-BenchMT. RTL-BenchMT focuses on two key applications: (1) automatically identifying and revising flawed benchmark cases and (2) automatically detecting and updating overfitting cases. With the assistance of RTL-BenchMT, we conduct a thorough, in-depth analysis of flawed and overfitting cases and produce a refined benchmark suite that will be open-sourced to the community.

Reactive synthesis, the problem of automatically constructing a hardware circuit from a logical specification, is a long-standing challenge in formal verification. It is elusive for two reasons: It is algorithmically hard, and writing formal specifications by hand is notoriously difficult. In this paper, we tackle both sides of the problem. For the algorithmic side, we present a neuro-symbolic approach to reactive synthesis that couples large reasoning models with model checkers to iteratively repair a synthesized Verilog implementation via sound symbolic feedback. Our approach solves more benchmarks than the best dedicated tools in the annual synthesis competition and extends to constructing parameterized systems, a problem known to be undecidable. On the specification side, we introduce an autoformalization step that shifts the specification task from temporal logic to natural language by introducing a hand-authored dataset of natural-language specifications for evaluation. We demonstrate performance comparable to that of starting from formal specifications, establishing natural synthesis as a viable end-to-end workflow.

Accelerating applications through the design of hardware accelerators can significantly enhance system performance and energy efficiency. Despite advances, such as high-level synthesis (HLS), designing accelerators for complex applications still remains highly labor-intensive, demanding considerable expertise in understanding workloads to be accelerated, hardware design, micro-architecture, and EDA tool usage, posing challenges for application domain experts. Therefore, most accelerator solutions are limited to applications with a regular predictable dataflow. Advances in AI have enabled agents that perform autonomous planning, reasoning, execution and reflection, leading to unprecedented potential for automation through agentic AI. We present A3D, an Agentic AI flow for end-to-end Automation of hardware Accelerator Design. A3D automates workload analysis, performance bottleneck identification, code refactoring for HLS compatibility and micro-architecture generation. A3D also generates diverse accelerator designs by automatically exploring the speed-area tradeoff space. Recent efforts have explored the use of AI for specific tasks such as design space exploration in HLS, leaving several tasks to still be performed manually. A3D addresses the challenges in applying modern LLMs to accelerator design by judiciously partitioning tasks among specialist agents, orchestrating process loops with specialist and verifier agents, utilizing pre-existing and custom tools, and employing agentic RAG for codebase and proprietary EDA tool documentation exploration. Our implementation of A3D, using commercial components like Claude Sonnet 4.5 and the Catapult HLS tool, demonstrates its effectiveness by generating accelerator designs with no human intervention from complex scientific applications like LAMMPS (molecular dynamics simulation) and QMCPACK (quantum chemistry).

High-Level Synthesis (HLS) compiles algorithmic C/C++ descriptions into hardware, with Quality of Results (QoR) -- latency and resource utilization -- critically governed by pragma configurations and code structure. Existing LLM-based HLS approaches train for functional correctness but ignore QoR entirely. We observe that reinforcement learning (RL) for HLS does not require absolute synthesis results -- only relative comparisons between candidates. Based on this insight, we propose \textbf{HLS-Seek}, a QoR-aware NL-to-HLS framework that replaces expensive synthesis-in-the-loop RL with a comparative proxy reward model achieving 99.53% Pareto-dominance accuracy. To prevent reward hacking, we introduce \textit{uncertainty-aware Monte Carlo (MC) dropout switching} that selectively invokes real Vitis HLS synthesis for low-confidence candidates and online updates the proxy, creating a self-improving reward system. HLS-Seek achieves 81.5% syntax correctness pass@1 and 81.4% Func@5 on HLS-eval with only 7B parameters, surpassing GPT-5.1 and other frontier models while achieving 8.5$\times$ faster training than real-reward RL. On QoR evaluation, HLS-Seek achieves the lowest latency on 16/30 kernels and Pareto-dominates HLS-specific baselines on 9 kernels.

Existing API-based agentic systems for RTL code generation are fundamentally misaligned with industrial practice: they assume a golden testbench is available at generation time, rely on closed-source APIs incompatible with chip vendors' air-gapped security requirements, and cannot be trained on vendors' proprietary RTL codebases, leaving valuable internal data unused. Recent self-trained models address the deployment constraint but remain single-turn generators that overlook the critical role of verification in real industrial flows. To bridge these gaps, we present ChipMATE, the first self-trained multi-agent framework for RTL generation. Inspired by industrial practice where correctness emerges from cross-comparison between independently written RTL modules and reference models, ChipMATE pairs a Verilog agent with a Python reference-model agent that mutually verify each other's outputs without any golden oracle. We design a backtrack-based inference workflow to prevent error propagation across turns, and a two-stage training pipeline that first trains each agent individually to saturate its code-generation capability, then trains the team jointly to collaborate effectively. To support the training, we further build a hybrid data-generation framework that produces 64.4K high-quality reference model training samples. ChipMATE achieves 75.0% and 80.1% pass@1 on VerilogEval V2 with 4B and 9B base models, outperforming all existing self-trained models and even DeepSeek V4 with 1600B parameters. Our code and model weights are publicly available in https://github.com/zhongkaiyu/ChipMATE.

The integration of Large Language Models (LLMs) into Electronic Design Automation (EDA) and hardware security is rapidly reshaping the semiconductor industry. While LLMs offer unprecedented capabilities in generating Register Transfer Level (RTL) code, automating testbenches, and bridging the semantic gap between high-level specifications and silicon, they simultaneously introduce severe vulnerabilities. This comprehensive review provides an in-depth analysis of the state-of-the-art in LLM-driven hardware design, organized around key advancements in EDA synthesis, hardware trust, design for security, and education. We systematically expand on the methodologies of recent breakthroughs -- from reasoning-driven synthesis and multi-agent vulnerability extraction to data contamination and adversarial machine learning (ML) evasion. We integrate general discussions on critical countermeasures, such as dynamic benchmarking to combat data memorization and aggressive red-teaming for robust security assessment. Finally, we synthesize cross-cutting lessons learned to guide future research toward secure, trustworthy, and autonomous design ecosystems.